Aqueous Electrochemical Reduction of Carbon Dioxide and Carbon Monoxide into Methanol with Cobalt Phthalocyanine

Ultrathin, Cationic Covalent Organic Nanosheets for Enhanced CO2 Electroreduction to Methanol

Metalloporphyrins and metallophthalocyanines emerge as popular building blocks to develop covalent organic nanosheets (CONs) for CO2 reduction reaction (CO2RR). However, existing CONs predominantly yield CO, posing a challenge in achieving efficient methanol production through multielectron reduction. Here, ultrathin, cationic, and cobalt-phthalocyanine-based CONs (iminium-CONs) are reported for electrochemical CO2-to-CH3OH conversion. The integration of quaternary iminium groups enables the formation of ultrathin morphology with uniformly anchored cobalt active sites, which are pivotal for facilitating rapid multielectron transfer. Moreover, the cationic iminium-CONs exhibit a lower activity for hydrogen evolution side reaction. Consequently, iminium-CONs manifest significantly enhanced selectivity for methanol production, as evidenced by a remarkable 711% and 270% improvement in methanol partial current density (jCH3OH) compared to pristine CoTAPc and neutral imine-CONs, respectively. Under optimized conditions, iminium-CONs deliver a high jCH3OH of 91.7 mA cm-2 at -0.78 V in a flow cell. Further, iminium-CONs achieve a global methanol Faradaic efficiency (FECH3OH) of 54% in a tandem device. Thanks to the single-site feature, the methanol is produced without the concurrent generation of other liquid byproducts. This work underscores the potential of cationic covalent organic nanosheets as a compelling platform for electrochemical six-electron reduction of CO2 to methanol.

Deciphering the Selectivity of the Electrochemical CO2 Reduction to CO by a Cobalt Porphyrin Catalyst in Neutral Aqueous Solution: Insights from DFT Calculations

Density functional theory (DFT) calculations were conducted to investigate the cobalt porphyrin-catalyzed electro-reduction of CO2 to CO in an aqueous solution. The results suggest that CoII -porphyrin (CoII -L) undertakes a ligand-based reduction to generate the active species CoII -L⋅- , where the CoII center antiferromagnetically interacts with the ligand radical anion. CoII -L⋅- then performs a nucleophilic attack on CO2 , followed by protonation and a reduction to give CoII -L-COOH. An intermolecular proton transfer leads to the heterolytic cleavage of the C-O bond, producing intermediate CoII -L-CO. Subsequently, CO is released from CoII -L-CO, and CoII -L is regenerated to catalyze the next cycle. The rate-determining step of this CO2 RR is the nucleophilic attack on CO2 by CoII -L⋅- , with a total barrier of 20.7 kcal mol-1 . The competing hydrogen evolution reaction is associated with a higher total barrier. A computational investigation regarding the substituent effects of the catalyst indicates that the CoPor-R3 complex is likely to display the highest activity and selectivity as a molecular catalyst.

Hydroxy-Group-Functionalized Single Crystal of Copper(II)-Porphyrin Complex for Electroreduction CO2 to CH4

Purposefully developing crystalline materials at molecular level to improve the selectivity of electroreduction CO₂ to CH₄ is still rarely studied. Herein, a single crystal of copper(II) complex with hydroxy groups was designed and synthesized, namely 5,10,15,20-tetrakis(3,4-dihydroxyphenyl)porphyrin copper(II) (Cu-PorOH), which could serve as a highly efficient heterogeneous electrocatalyst for electroreduction of CO₂ toward CH₄ . In 0.5 m KHCO₃ , Cu-PorOH gave a high faradaic efficiency of 51.3 % for CH₄ and drove a partial current density of 23.2 mA cm^-2 at -1.5 V versus the reversible hydrogen electrode in H-cell. The high performance was greatly promoted by the hydroxy groups in Cu-PorOH, which could not only form stable three-dimensional frameworks through hydrogen-bonding interactions but also stabilize the intermediate species by hydrogen bonds, as supported by density functional theory calculations. This work provides an effective avenue in exploring crystalline catalysts for CO₂ reduction at molecular level.

Highly Efficient CO2 Electroreduction to Methanol through Atomically Dispersed Sn Coupled with Defective CuO Catalysts

Using renewable electricity to drive CO₂ electroreduction is an attractive way to achieve carbon-neutral energy cycle and produce value-added chemicals and fuels. As an important platform molecule and clean fuel, methanol requires 6-electron transfer in the process of CO₂ reduction. Currently, CO₂ electroreduction to methanol suffers from poor efficiency and low selectivity. Herein, we report the first work to design atomically dispersed Sn site anchored on defective CuO catalysts for CO₂ electroreduction to methanol. It exhibits high methanol Faradaic efficiency (FE) of 88.6 % with a current density of 67.0 mA cm^-2 and remarkable stability in a H-cell, which is the highest FE(methanol) with such high current density compared with the results reported to date. The atomic Sn site, adjacent oxygen vacancy and CuO support cooperate very well, leading to higher double-layer capacitance, larger CO₂ adsorption capacity and lower interfacial charge transfer resistance. Operando experiments and density functional theory calculations demonstrate that the catalyst is beneficial for CO₂ activation via decreasing the energy barrier of *COOH dissociation to form *CO. The obtained key intermediate *CO is then bound to the Cu species for further reduction, leading to high selectivity toward methanol.

Electrocatalytic and Photocatalytic Reduction of Carbon Dioxide by Earth-abundant Bimetallic Molecular Catalysts

Converting CO₂ into useful resources by electrocatalysis and photocatalysis is a promising strategy for recycling of the gas and electrification of industries. Numerous studies have shown that multinuclear metal catalysts have higher selectivity and catalytic activity than monometallic catalysts due to the synergistic effects between the metal sites. In this review, we summarize some of the recent progress on the electrocatalytic and photocatalytic reduction of CO₂ by earth-abundant bimetallic molecular catalysts.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Hierarchical Metal-Polymer Hybrids for Enhanced CO2 Electroreduction

The design of catalysts with high activity, selectivity, and stability is key to the electroreduction of CO₂ . Herein, we report the synthesis of 3D hierarchical metal/polymer-carbon paper (M/polymer-CP) electrodes by in situ electrosynthesis. The 3D polymer layer on CP (polymer-CP) was first prepared by in situ electropolymerization, then a 3D metal layer was decorated on the polymer-CP to produce the M/polymer-CP electrode. Electrodes with different metals (e.g. Cu, Pd, Zn, Sn) and various polymers could be prepared by this method. The electrodes could efficiently reduce CO₂ to desired products, such as C₂ H₄ , CO, and HCOOH, depending on the metal used. For example, C₂ H₄ could be formed with a Faradaic efficiency of 59.4 % and a current density of 30.2 mA cm^-2 by using a very stable Cu/PANI-CP electrode in an H-type cell. Control experiments and theoretical calculations showed that the 3D hierarchical structure of the metals and in situ formation of the electrodes are critical for the excellent performance.

Heterogeneous Nature of Electrocatalytic CO/CO2 Reduction by Cobalt Phthalocyanines

Molecular catalysts for electrochemical CO₂ reduction have traditionally been studied in their dissolved states. However, the heterogenization of molecular catalysts has the potential to deliver much higher reaction rates and enable the reduction of CO₂ by more than two electrons. In light of the recently discovered reactivity of heterogenized cobalt phthalocyanine molecules to catalyze CO₂ reduction into methanol, direct comparison is needed to uncover the distinct catalytic activity and selectivity in homogeneous catalysis versus heterogeneous catalysis. Herein, soluble cobalt phthalocyanine derivatives were synthesized, and their catalytic activities in the homogeneous solutions were evaluated. The results show that the observed catalytic activities for both CO₂ -to-CO and CO-to-methanol conversions in aqueous solutions of the cobalt phthalocyanines are predominantly heterogeneous in nature through the adsorbed species on the electrode.

Boost Selectivity of HCOO- Using Anchored Bi Single Atoms towards CO2 Reduction

Single atoms have been widely applied as efficient catalysts in various catalytic systems due to its high selectivity for certain products, which is induced by a uniform coordinate environment of active sites. Herein, it is demonstrated that Bi single atoms anchored on carbon black (Bi SAs/C) can serve as an efficient catalyst for CO₂ electroreduction into formate (HCOO^- ). During CO₂ electroreduction, Bi SAs/C achieved a faradaic efficiency for HCOO^- of 83.6 % at-1.1 Vversus reversible hydrogen electrode (V vs. RHE). Notably, the selectivity for HCOO^- of Bi SAs/C was always higher than 95 % at all applied potentials. In addition, at-1.2 Vvs.RHE, the current density for HCOO^- formation in thepresence of Bi SAs/C reached-12.0 mA cm^-2 , which was 3.4 times as high as that (-3.5 mA cm^-2 ) of BiO_x clusters on carbon black (BiO_x /C). Mechanistic studies revealed that Bi SAs/C facilitated the faradaic process and accelerated reaction kinetics in comparison with BiO_x /C.

Electrocatalytic Reduction of CO2 to Acetic Acid by a Molecular Manganese Corrole Complex

The controlled electrochemical reduction of carbon dioxide to value added chemicals is an important strategy in terms of renewable energy technologies. Therefore, the development of efficient and stable catalysts in an aqueous environment is of great importance. In this context, we focused on synthesizing and studying a molecular Mn^III‐corrole complex, which is modified on the three meso‐positions with polyethylene glycol moieties for direct and selective production of acetic acid from CO₂. Electrochemical reduction of Mn^III leads to an electroactive Mn^II species, which binds CO₂ and stabilizes the reduced intermediates. This catalyst allows to electrochemically reduce CO₂ to acetic acid in a moderate acidic aqueous medium (pH 6) with a selectivity of 63 % and a turn over frequency (TOF) of 8.25 h⁻¹, when immobilized on a carbon paper (CP) electrode. In terms of high selectivity towards acetate, we propose the formation and reduction of an oxalate type intermediate, stabilized at the Mn^III‐corrole center.