Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A Comprehensive Review on the Boosted Effects of Anion Vacancy in the Heterogeneous Photocatalytic Degradation, Part II: Focus on Oxygen Vacancy

Environmental problems, including the increasingly polluted water and the energy crisis, have led to a need to propose novel strategies/methodologies to contribute to sustainable progress and enhance human well-being. For these goals, heterogeneous semiconducting-based photocatalysis is introduced as a green, eco-friendly, cost-effective, and effective strategy. The introduction of anion vacancies in semiconductors has been well-known as an effective strategy for considerably enhancing the photocatalytic activity of such photocatalytic systems, giving them the advantages of promoting light harvesting, facilitating photogenerated electron-hole pair separation, optimizing the electronic structure, and enhancing the yield of reactive radicals. This Review will introduce the effects of anion vacancy-dominated photodegradation systems. Then, their mechanism will illustrate how an anion vacancy changes the photodegradation pathway to enhance the degradation efficiency toward pollutants and the overall photocatalytic performance. Specifically, the vacancy defect types and the methods of tailoring vacancies will be briefly illustrated, and this part of the Review will focus on the oxygen vacancy (OV) and its recent advances. The challenges and development issues for engineered vacancy defects in photocatalysts will also be discussed for practical applications and to provide a promising research direction. Finally, some prospects for this emerging field will be proposed and suggested. All permission numbers for adopted figures from the literature are summarized in a separate file for the Editor.

Operando IR Optical Control of Localized Charge Carriers in BiVO4 Photoanodes

In photoelectrochemical cells (PECs) the photon-to-current conversion efficiency is often governed by carrier transport. Most metal oxides used in PECs exhibit thermally activated transport due to charge localization via the formation of polarons or the interaction with defects. This impacts catalysis by restricting the charge accumulation and extraction. To overcome this transport bottleneck nanostructuring, selective doping and photothermal treatments have been employed. Here we demonstrate an alternative approach capable of directly activating localized carriers in bismuth vanadate (BiVO4). We show that IR photons can optically excite localized charges, modulate their kinetics, and enhance the PEC current. Moreover, we track carriers bound to oxygen vacancies and expose their ∼10 ns charge localization, followed by ∼60 μs transport-assisted trapping. Critically, we demonstrate that localization is strongly dependent on the electric field within the device. While optical modulation has still a limited impact on overall PEC performance, we argue it offers a path to control devices on demand and uncover defect-related photophysics.

Defect-Modified nano-BaTiO3 as a Sonosensitizer for Rapid and High-Efficiency Sonodynamic Sterilization

Multidrug-resistant bacteria caused by the unlimited overuse of antibiotics pose a great challenge to global health. An antibacterial method based on reactive oxygen species (ROS) is one of the effective strategies without inducing bacterial resistance. Owing to the ability of generating ROS, piezocatalytic material-mediated sonodynamic therapy (SDT) has drawn much attention. However, its major challenge is the low ROS generation efficiency in the piezocatalytic process due to the poor charge carrier concentration of piezoelectric materials. Vacancy engineering can regulate the charge density and largely promote ROS generation under ultrasound (US) irradiation. Herein, a US-responsive self-doped barium titanate with controlled oxygen vacancy (Vo) concentrations was successfully synthesized through a facile thermal reduction treatment at different temperatures (i.e., 350, 400, and 450 °C), and the corresponding samples were named as BTO-350, BTO-400, and BTO-450, respectively. Then, the effect of Vo concentrations on ROS generation efficiency during the piezocatalytic process was systematically studied. And BTO-400 was found to possess the highest piezocatalytic activity and excellent sonodynamic antibacterial performance against Escherichia coli and Staphylococcus aureus. Furthermore, its antibacterial mechanism was confirmed that the ROS generated under US could damage bacterial cell membrane and cause considerable leakage of cytoplasmic components and irreversible death of bacteria. Notably, the in vivo results illustrated that the BTO-400 could serve as an effective antibacterial agent and accelerate skin healing via SDT therapy. In all, the Vo defect-modified nano-BaTiO₃ has a noticeable potential to induce a rapid and efficient sterilization as well as skin tissue repair by SDT.

A Conformal Carbon Nanolayer Coated Fe2 O3 Cocatalyst for the Promoted Activity of Plasma-Sputtered BiVO4 Photoanode

To simultaneously improve the hole extraction ability of the BiVO₄ photoanode and accelerate the surface reaction kinetics, herein, a carbon nanolayer conformally coated Fe₂ O₃ (C-Fe₂ O₃ ) as oxygen evolution catalyst (OEC) is loaded on the H₂ plasma treated nanoporous BiVO₄ (BVO(H₂ )) surface by a hydrothermal reaction. It is found that the H₂ plasma induced vacancies in BVO remarkably increases the conductivity, and the C-Fe₂ O₃ enables hole extraction from the bulk to the surface as well as efficient hole injection to the electrolyte. As a result, the C-Fe₂ O₃ /BVO(H₂ ) photoanode achieves a photocurrent density of 4.4 mA/cm² at 1.23 V vs. reversible hydrogen electrode (RHE) and an ABPE value of 1.5 % at 0.68 V vs. RHE, which are 4.8-fold and 13-fold higher than that of BVO photoanode, respectively.

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄ ) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x ) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄ /VO_x photoanode exhibits a photocurrent density of 6.29 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.

Subsurface Engineering Induced Fermi Level De-pinning in Metal Oxide Semiconductors for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for renewable solar light conversion. However, surface Fermi level pinning (FLP), caused by surface trap states, severely restricts the PEC activities. Theoretical calculations indicate subsurface oxygen vacancy (sub-O_v ) could release the FLP and retain the active structure. A series of metal oxide semiconductors with sub-O_v were prepared through precisely regulated spin-coating and calcination. Etching X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and electron energy loss spectra (EELS) demonstrated O_v located at sub ∼2-5 nm region. Mott-Schottky and open circuit photovoltage results confirmed the surface trap states elimination and Fermi level de-pinning. Thus, superior PEC performances of 5.1, 3.4, and 2.1 mA cm^-2 at 1.23 V vs. RHE were achieved on BiVO₄ , Bi₂ O₃ , TiO₂ with outstanding stability for 72 h, outperforming most reported works under the identical conditions.

Laser-Reduced BiVO4 for Enhanced Photoelectrochemical Water Splitting

The present study proposes a laser irradiation method to superficially reduce BiVO4 photoelectrodes and boost their water oxidation reaction performance. The origin of this enhanced performance toward oxygen evolution reaction (OER) was studied using a combination of a suite of structural, chemical, and mechanistic advanced characterization techniques including X-ray photoelectron (XPS), X-ray absorption spectroscopy (XAS), electrochemical impedance spectroscopy (EIS), and transient absorption spectroscopy (TAS), among others. We found that the reduction of the material is localized at the surface of the sample and that this effect creates effective n-type doping and a shift to more favorable energy band positions toward water oxidation. This thermodynamic effect, together with the change in sample morphology to larger and denser domains, results in an extended lifetime of the photogenerated carriers and improved charge extraction. In addition, the stability of the reduced sample in water was also confirmed. All of these effects result in a two-fold increase in the photocurrent density of the laser-treated samples.

Engineering MoOx /MXene Hole Transfer Layers for Unexpected Boosting of Photoelectrochemical Water Oxidation

The development of semiconductor photoanodes is of great practical interest for the realization of photoelectrochemical (PEC) water splitting. Herein, MXene quantum dots (MQD) were grafted on a BiVO₄ substrate, then a MoO_x layer by combining an ultrathin oxyhydroxide oxygen evolution cocatalyst (OEC) was constructed as an integrated photoanode. The OEC/MoO_x /MQD/BiVO₄ array not only achieves a current density of 5.85 mA cm^-2 at 1.23 V versus a reversible hydrogen electrode (vs. RHE), but also enhances photostability. From electrochemical analysis and density functional theory calculations, high PEC performance is ascribed to the incorporation of MoO_x /MQD as hole transfer layers, retarding charge recombination, promoting hole transfer and accelerating water splitting kinetics. This proof-of-principle work not only demonstrates the potential utilization of hole transfer layers, but also sheds light on rational design and fabrication of integrated photoanodes for feasible solar energy conversion.

Ultrastable and Efficient Visible-light-driven CO2 Reduction Triggered by Regenerative Oxygen-Vacancies in Bi2 O2 CO3 Nanosheets

Herein, we first design a fast low-pressure ultraviolet light irradiation strategy for easily regenerating the nearly equivalent surface vacancies. Taking the defective Bi₂ O₂ CO₃ nanosheets as an example, nearly equal amount of oxygen vacancies can be regenerated under UV light irradiation. Synchrotron-radiation quasi in situ X-ray photoelectron spectra disclose the Bi sites in the O-defective Bi₂ O₂ CO₃ nanosheets can act as the highly active sites, which not only help to activate CO₂ molecules, but also contribute to stabilizing the rate-limiting COOH* intermediate. Also, in situ Fourier transform infrared spectroscopy and in situ mass spectrometry unravel the UV light irradiation contributes to accelerating CO desorption process. As a result, the O-defective Bi₂ O₂ CO₃ nanosheets achieve a stability up to 2640 h over 110 cycling tests and a high evolution rate of 275 μmol g^-1  h^-1 for visible-light-driven CO₂ reduction to CO.

Enhanced Photoelectrochemical Water Splitting on Nickel-Doped Cobalt Phosphate by Modulating both Charge Transfer and Oxygen Evolution Efficiencies

Detrimental charge recombination at photoanode/electrolyte junctions severely impedes photoelectrochemical (PEC) performance. The deposition of cobalt phosphate (CoPi) onto photoanodes is an efficient approach to achieve high PEC efficiency. However, achieving performances at the required remains a huge challenge, owing to the passivation effect of CoPi. In this study, function-tunable strategy, whereby the passivation role is switched with the activation role, is exploited to modulate PEC performance through simultaneous activation of interface charge transfer and surface catalysis. By depositing nickel-doped CoPi onto a BiVO₄ (BV) substrate, the integrated system (BV/Ni₁ Co₇ Pi) exhibits a remarkable photocurrent density (4.15 mA cm^-2 ), which is a 4.6-fold increase relative to BV (0.90 mA cm^-2 ). Moreover, the satisfactory performance can be also achieved on α-Fe₂ O₃ photoanode. These findings provide guidance for improving the efficiency of CoPi on photoanodes for PEC water oxidation.

Towards Long-Term Photostability of Nickel Hydroxide/BiVO4 Photoanodes for Oxygen Evolution Catalysts via In Situ Catalyst Tuning

Increasing long-term photostability of BiVO₄ photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO₄ junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO₄ and NiOOH/electrolyte junctions. Further, adding Fe²⁺ into the borate buffer electrolyte alleviates the active but unstable character of etched-NiOOH/BiVO₄ , leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long-term durability.