Regulating the Coordination Environment of MOF‐Templated Single‐Atom Nickel Electrocatalysts for Boosting CO 2 Reduction

Enzymatic Activation and Continuous Electrochemical Production of Methane from Dilute CO2 Sources with a Self-Healing Capsule

Converting dilute CO2 source into value-added chemicals and fuels is a promising route to reduce fossil fuel consumption and greenhouse gas emission, but integrating electrocatalysis with CO2 capture still faced marked challenges. Herein, we show that a self-healing metal-organic macrocycle functionalized as an electrochemical catalyst to selectively produce methane from flue gas and air with the lowest applied potential so far (0.06 V vs reversible hydrogen electrode, RHE) through an enzymatic activation fashion. The capsule emulates the enzyme' pocket to abstract one in situ-formed CO2-adduct molecule with the commercial amino alcohols, forming an easy-to-reduce substrate-involving clathrate to combine the CO2 capture with electroreduction for a thorough CO2 reduction. We find that the self-healing system exhibited enzymatic kinetics for the first time with the Michaelis-Menten mechanism in the electrochemical reduction of CO2 and maintained a methane Faraday efficiency (FE) of 74.24% with a selectivity of over 99% for continuous operation over 200 h. A consecutive working lab at 50 mA·cm-2, in an eleven-for-one (10 h working and 1 h healing) electrolysis manner, gives a methane turnover number (TON) of more than 10,000 within 100 h. The integrated electrolysis with CO2 capture facilitates the thorough reduction of flue gas (ca. 13.0% of CO2) and first time of air (ca. 400 ppm of CO2 to 42.7 mL CH4 from 1.0 m3 air). The new self-healing strategy of molecular electrocatalyst with an enzymatic activation manner and anodic shifting of the applied potentials provided a departure from the existing electrochemical catalytic techniques.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Boosting Electrochemical CO2 Reduction to CO by Regulating the Porous Structure of Carbon Membrane

Ni single-atom-decorated nitrogen-doped carbon materials (Ni-Nx-C) have demonstrated high efficiency in the electrochemical reduction of CO2 (CO2RR) to CO. In this study, Ni-Nx-C active sites were embedded within a carbon membrane via an electrospinning and pyrolysis process. The resulting self-supported carbon membrane hosting Ni-Nx-C sites could be directly utilized as an electrode for the CO2RR. To enhance the CO2RR performance of the carbon membrane, the porous structure of the carbon membrane was fine-tuned by incorporating a pore-forming agent. The optimized porous carbon membrane electrode, K0.66-Ni-NC, achieved an impressive CO faradaic efficiency (FECO) of over 90% within a wide potential range from -0.8 to -1.6 V vs RHE for CO2RR. Additionally, it maintained an FECO of above 90% at -0.8 V vs RHE throughout a 30 h durability test in an H-cell. Further analysis has revealed that the porous structure of the carbon membrane not only facilitates the mass transport of CO2 but also increases the level of exposure of active sites during the CO2RR.

Probing Coordination Number of Single-Atom Catalysts by d-Band Center-Regulated Luminescence

It is essential to probe the coordination number (CN) because it is a crucial factor to ensure the catalytic capability of single-atom catalysts (SACs). Currently, synchrotron X-ray absorption spectroscopy (XAS) is widely used to measure the CN. However, the scarcity of synchrotron X-ray source and complicated data analysis restrict its wide applications in determining the CN of SACs. In this contribution, we have developed a d-band center-regulated acetone cataluminescence (CTL) probe for a rapid screening of the CN of Pt-SACs. It is disclosed that the CN-triggered CTL is attributed to the fact that the increased CN could induce the downward shift of d-band center position, which assists the acetone adsorption and promotes the subsequent catalytic reaction. In addition, the universality of the proposed acetone-CTL probe is verified by determining the CN of Fe-SACs. This work has opened a new avenue for exploring an alternative to synchrotron XAS for the determination of CN of SACs and even conventional metal catalysts through d-band center-regulated CTL.

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Designing cost-efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal-air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe-based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec-1, achieved at a current density of 10 mA cm- 2. Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Boosting the Electrocatalytic Water Splitting Performance Using Hydrophilic Metal-Organic Framework

In this study, we employed a rapid and efficient microwave method to synthesize Metal-Organic Framework (MOF-303), which was subsequently embedded onto Palladium/Carbon (Pd/C) electrodes. The resulting hybrid material, Pd/C@MOF-303, was thoroughly characterized, and its performance in the Hydrogen Evolution Reaction (HER) was systematically investigated. The Pd/C@MOF-303 composite exhibited remarkable improvements in HER performance compared to the unmodified Pd/C electrode. At a benchmark current density of 10 mA cm-2 , the overpotentials for Pd/C and Pd/C@MOF-303 were measured at 185 mV and 175 mV, respectively. This reduction in overpotential highlights the superior catalytic activity of the Pd/C@MOF-303 hybrid material in facilitating the HER. Furthermore, the Pd/C@MOF-303 electrode demonstrated enhanced HER activity, increased mass activity, and excellent charge transfer rates compared to its unmodified counterpart, Pd/C. The findings underscore the significance of the hydrophilic MOF-303 in tailoring the surface characteristics of electrocatalysts, thereby offering insights into the design principles for advanced materials with superior performance in electrochemical applications.

Contemporary advances in photocatalytic CO2 reduction using single-atom catalysts supported on carbon-based materials

The persistent issue of CO2 emissions and their subsequent impact on the Earth's atmosphere can be effectively addressed through the utilization of efficient photocatalysts. Employing a sustainable carbon cycle via photocatalysis presents a promising technology for simultaneously managing the greenhouse effect and the energy dilemma. However, the efficiency of energy conversion encounters limitations due to inadequate carrier utilization and a deficiency of reactive sites. Single-atom catalysts (SACs) have demonstrated exceptional performance in efficiently addressing the aforementioned challenges. This review article commences with an overview of SAC types, structures, fundamentals, synthesis strategies, and characterizations, providing a logical foundation for the design and properties of SACs based on the correlation between their structure and efficiency. Additionally, we delve into the general mechanism and the role of SACs in photocatalytic CO2 reduction. Furthermore, we furnish a comprehensive survey of the latest advancements in SACs concerning their capacity to enhance efficiency, long-term stability, and selectivity in CO2 reduction. Carbon-structured support materials such as covalent organic frameworks (COFs), graphitic carbon nitride (g-C3N4), metal-organic frameworks (MOFs), covalent triazine frameworks (CTFs), and graphene-based photocatalysts have garnered significant attention due to their substantial surface area, superior conductivity, and chemical stability. These carbon-based materials are frequently chosen as support matrices for anchoring single metal atoms, thereby enhancing catalytic activity and selectivity. The motivation behind this review article lies in evaluating recent developments in photocatalytic CO2 reduction employing SACs supported on carbon substrates. In conclusion, we highlight critical issues associated with SACs, potential prospects in photocatalytic CO2 reduction, and existing challenges. This review article is dedicated to providing a comprehensive and organized compilation of recent research findings on carbon support materials for SACs in photocatalytic CO2 reduction, with a specific focus on materials that are environmentally friendly, readily accessible, cost-effective, and exceptionally efficient. This work offers a critical assessment and serves as a systematic reference for the development of SACs supported on MOFs, COFs, g-C3N4, graphene, and CTFs support materials to enhance photocatalytic CO2 conversion.

Single-Atom and Dual-Atom Electrocatalysts: Synthesis and Applications

Distinguishing themselves from nanostructured catalysts, single-atom catalysts (SACs) typically consist of positively charged single metal and coordination atoms without any metal-metal bonds. Dual-atom catalysts (DACs) have emerged as extended family members of SACs in recent years. Both SACs and DACs possess characteristics that combine both homogeneous and heterogeneous catalysis, offering advantages such as uniform active sites and adjustable interactions with ligands, while also inheriting the high stability and recyclability associated with heterogeneous catalyst systems. They offer numerous advantages and are extensively utilized in the field of electrocatalysis, so they have emerged as one of the most prominent material research platforms in the direction of electrocatalysis. This review provides a comprehensive review of SACs and DACs in the field of electrocatalysis: encompassing economic production, elucidating electrocatalytic reaction pathways and associated mechanisms, uncovering structure-performance relationships, and addressing major challenges and opportunities within this domain. Our objective is to present novel ideas for developing advanced synthesis strategies, precisely controlling the microstructure of catalytic active sites, establishing accurate structure-activity relationships, unraveling potential mechanisms underlying electrocatalytic reactions, identifying more efficient reaction paths, and enhancing overall performance in electrocatalytic reactions.

Transition Metal Ion Doping on ZIF-8 Enhances the Electrochemical CO2 Reduction Reaction

The electrochemical reduction of CO2  to diverse value-added chemicals is a unique, environmentally friendly approach for curbing greenhouse gas emissions while addressing sluggish catalytic activity and low Faradaic efficiency (FE) of electrocatalysts. Here, zeolite-imidazolate-frameworks-8 (ZIF-8) containing various transition metal ions-Ni, Fe, and Cu-at varying concentrations upon doping are fabricated for the electrocatalytic CO2 reduction reaction (CO2 RR) to carbon monoxide (CO) without further processing. Atom coordination environments and theoretical electrocatalytic performance are scrutinized via X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations. Upon optimized Cu doping on ZIF-8, Cu0.5 Zn0.5 /ZIF-8 achieves a high partial current density of 11.57 mA cm-2 and maximum FE for CO of 88.5% at -1.0 V (versus RHE) with a stable catalytic activity over 6 h. Furthermore, the electron-rich sp2 C atom facilitates COOH* promotion after Cu doping of ZIF-8, leading to a local effect between the zinc-nitrogen (Zn-N4 ) and copper-nitrogen (Cu-N4 ) moieties. Additionally, the advanced CO2 RR pathway is illustrated from various perspectives, including the pre-H-covered state under the CO2 RR. The findings expand the pool of efficient metal-organic framework (MOF)-based CO2 RR catalysts, deeming them viable alternatives to conventional catalysts.

Toward high-efficiency photovoltaics-assisted electrochemical and photoelectrochemical CO2 reduction: Strategy and challenge

The realization of a complete techno-economy through a significant carbon dioxide (CO2) reduction in the atmosphere has been explored to promote a low-carbon economy in various ways. CO2 reduction reactions (CO2RRs) can be induced using sustainable energy, including electric and solar energy, using systems such as electrochemical (EC) CO2RR and photoelectrochemical (PEC) systems. This study summarizes various fabrication strategies for non-noble metal, copper-based, and metal-organic framework-based catalysts with excellent Faradaic efficiency (FE) for target carbon compounds, and for noble metals with low overvoltage. Although EC and PEC systems achieve high energy conversion efficiency with excellent catalysts, they still require external power and lack complete bias-free operation. Therefore, photovoltaics, which can overcome the limitations of these systems, have been introduced. The utilization of silicon and perovskite-based solar cells for photovoltaics-assisted EC (PV-EC) and photovoltaics-assisted PEC (PV-PEC) CO2RR systems are cost-efficient, and the III-V semiconductor photoabsorbers achieved high solar-to-carbon efficiency. This work focuses on PV-EC and PV-PEC CO2RR systems and their components and then summarizes the special cell configurations, including the tandem and stacked structures. Additionally, the study discusses current issues, such as low energy conversion, expensive PV, theoretical limits, and industrial scale-up, along with proposed solutions.

Single-Atom Anchored Curved Carbon Surface for Efficient CO2 Electro-Reduction with Nearly 100% CO Selectivity and Industrially-Relevant Current Density

Although single metal atoms on porous carbons (PCs) are widely used in electrochemical CO2 reduction reaction, these systems have long relied on flat graphene-based models, which are far beyond reality because of abundant curved structures in PCs; the effect of curved surfaces has long been ignored. In addition, the selectivity generally decreases under high current density, which severely limits practical application. Herein, theoretical calculations reveal that a single-Ni-atom on a curved surface can simultaneously enhance the total density of states around Fermi level and decrease the energy barrier for *COOH formation, thereby enhancing catalytic activity. This work reports a rational molten salt approach for preparing PCs with ultra-high specific surface area of up to 2635 m2 g-1 . As determined by cutting-edge techniques, a single Ni atom on a curved carbon surface is obtained and used as a catalyst for electrochemical CO2 reduction. The CO selectivity reaches up to 99.8% under industrial-level current density of 400 mA cm-2 , outperforming state-of-the-art PC-based catalysts. This work not only offers a new method for the rational synthesis of single atom catalysts with strained geometry to host rich active sites, but also provides in-depth insights for the origin of catalytic activity of curved structure-enriched PC-based catalysts.

Bifunctional Single Atom Catalysts for Rechargeable Zinc-Air Batteries: From Dynamic Mechanism to Rational Design

Ever-growing demands for rechargeable zinc-air batteries (ZABs) call for efficient bifunctional electrocatalysts. Among various electrocatalysts, single atom catalysts (SACs) have received increasing attention due to the merits of high atom utilization, structural tunability, and remarkable activity. Rational design of bifunctional SACs relies heavily on an in-depth understanding of reaction mechanisms, especially dynamic evolution under electrochemical conditions. This requires a systematic study in dynamic mechanisms to replace current trial and error modes. Herein, fundamental understanding of dynamic oxygen reduction reaction and oxygen evolution reaction mechanisms for SACs is first presented combining in situ and/or operando characterizations and theoretical calculations. By highlighting structure-performance relationships, rational regulation strategies are particularly proposed to facilitate the design of efficient bifunctional SACs. Furthermore, future perspectives and challenges are discussed. This review provides a thorough understanding of dynamic mechanisms and regulation strategies for bifunctional SACs, which are expected to pave the avenue for exploring optimum single atom bifunctional oxygen catalysts and effective ZABs.

Modulating the Catalytic Properties of Bimetallic Atomic Catalysts: Role of Dangling Bonds and Charging

Bimetallic atomic catalysts (BACs) exhibit great potential in CO₂ electroreduction. However, modulation and improvement of their catalytic performance are still challenging. To address these issues, an intrinsic descriptor ψ based on the valence properties of active centers was used. The role of the dangling bonds and charging in modulating the catalytic properties of BACs called M₁ M₂ -N₆ -G (M₁ =Ru and Fe) was studied. It was shown that linear relationships between the adsorption energy of the C-species are broken under the effect of the dangling bonds and that they are restored with charging. However, charging has minor effects on the adsorption of the O-species. These findings enable screening promising BACs for CH₃ OH production. This research provides effective schemes for modulating the properties of catalysts, which is beneficial to enriching high-performance catalysts for various reactions.

Nanosecond Laser Confined Bismuth Moiety with Tunable Structures on Graphene for Carbon Dioxide Reduction

Substrate-supported catalysts with atomically dispersed metal centers are promising for driving the carbon dioxide reduction reaction (CO₂RR) to produce value-added chemicals; however, regulating the size of exposed catalysts and optimizing their coordination chemistry remain challenging. In this study, we have devised a simple and versatile high-energy pulsed laser method for the enrichment of a Bi "single atom" (SA) with a controlled first coordination sphere on a time scale of nanoseconds. We identify the mechanistic bifurcation routes over a Bi SA that selectively produce either formate or syngas when bound to C or N atoms, respectively. In particular, C-stabilized Bi (Bi-C) exhibits a maximum formate partial current density of -29.3 mA cm^-2 alongside a TOF value of 2.64 s^-1 at -1.05 V vs RHE, representing one of the best SA-based candidates for CO₂-to-formate conversion. Our results demonstrate that the switchable selectivity arises from the different coupling states and metal-support interactions between the central Bi atom and adjacent atoms, which modify the hybridizations between the Bi center and *OCHO/*COOH intermediates, alter the energy barriers of the rate-determining steps, and ultimately trigger the branched reaction pathways after CO₂ adsorption. This work demonstrates a practical and universal ultrafast laser approach to a wide range of metal-substrate materials for tailoring the fine structures and catalytic properties of the supported catalysts and provides atomic-level insights into the mechanisms of the CO₂RR on ligand-modified Bi SAs, with potential applications in various fields.

Rational Design of Atomically Dispersed Metal Site Electrocatalysts for Oxygen Reduction Reaction

Future renewable energy supply and a cleaner Earth greatly depend on various crucial catalytic reactions for the society. Atomically dispersed metal site electrocatalysts (ADMSEs) have attracted tremendous research interest and are considered as the next-generation promising oxygen reduction reaction (ORR) electrocatalysts due to the maximum atom utilization efficiency, tailorable catalytic sites, and tunable electronic structures. Despite great efforts have been devoted to the development of ADMSEs, the systematic summary for design principles of high-efficiency ADMSEs is not sufficiently highlighted for ORR. In this review, the authors first summarize the fundamental ORR mechanisms for ADMSEs, and further discuss the intrinsic catalytic mechanism from the perspective of theoretical calculation. Then, the advanced characterization techniques to identify the active sites and effective synthesis methods to prepare catalysts for ADMSEs are also showcased. Subsequently, a special emphasis is placed on effective strategies for the rational design of the advanced ADMSEs. Finally, the present challenges to be addressed in practical application and future research directions are also proposed to overcome the relevant obstacles for developing high-efficiency ORR electrocatalysts. This review aims to provide a deeper understanding for catalytic mechanisms and valuable design principles to obtain the advanced ADMSEs for sustainable energy conversion and storage techniques.

Recent Progress in Electrocatalytic Reduction of CO2

A stable life support system in the spacecraft can greatly promote long-duration, far-distance, and multicrew manned space flight. Therefore, controlling the concentration of CO2 in the spacecraft is the main task in the regeneration system. The electrocatalytic CO2 reduction can effectively treat the CO2 generated by human metabolism. This technology has potential application value and good development prospect in the utilization of CO2 in the space station. In this paper, recent research progress for the electrocatalytic reduction of CO2 was reviewed. Although numerous promising accomplishments have been achieved in this field, substantial advances in electrocatalyst, electrolyte, and reactor design are yet needed for CO2 utilization via an electrochemical conversion route. Here, we summarize the related works in the fields to address the challenge technology that can help to promote the electrocatalytic CO2 reduction. Finally, we present the prospective opinions in the areas of the electrocatalytic CO2 reduction, especially for the space station and spacecraft life support system.

Promoting CO2 Dynamic Activation via Micro-Engineering Technology for Enhancing Electrochemical CO2 Reduction

Optimizing the coordination structure and microscopic reaction environment of isolated metal sites is promising for boosting catalytic activity for electrocatalytic CO₂ reduction reaction (CO₂ RR) but is still challenging to achieve. Herein, a newly electrostatic induced self-assembly strategy for encapsulating isolated Ni-C₃ N₁ moiety into hollow nano-reactor as I-Ni SA/NHCRs is developed, which achieves FE_CO  of 94.91% at -0.80 V, the CO partial current density of ≈-15.35 mA cm^-2 , superior to that with outer Ni-C₂ N₂ moiety (94.47%, ≈-12.06 mA cm^-2 ), or without hollow structure (92.30%, ≈-5.39 mA cm^-2 ), and high FE_CO of ≈98.41% at 100 mA cm^-2 in flow cell. COMSOL multiphysics finite-element method and density functional theory (DFT) calculation illustrate that the excellent activity for I-Ni SA/NHCRs should be attributed to the structure-enhanced kinetics process caused by its hollow nano-reactor structure and unique Ni-C₃ N₁ moiety, which can enrich electron on Ni sites and positively shift d-band center to the Fermi level to accelerate the adsorption and activation of CO₂ molecule and *COOH formation. Meanwhile, this strategy also successfully steers the design of encapsulating isolated iron and cobalt sites into nano-reactor, while I-Ni SA/NHCRs-based zinc-CO₂ battery assembled with a peak power density of 2.54 mW cm-^-2 is achieved.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Modulating the Electronic Structures of Dual-Atom Catalysts via Coordination Environment Engineering for Boosting CO2 Electroreduction

Dual-atom catalysts (DACs) have emerged as efficient electrocatalysts for CO₂ reduction owing to the synergistic effect between the binary metal sites. However, rationally modulating the electronic structure of DACs to optimize the catalytic performance remains a great challenge. Herein, we report the electronic structure modulation of three Ni₂ DACs (namely, Ni₂ -N₇ , Ni₂ -N₅ C₂ and Ni₂ -N₃ C₄ ) by the regulation of the coordination environments around the dual-atom Ni₂ centres. As a result, Ni₂ -N₃ C₄ exhibits significantly improved electrocatalytic activity for CO₂ reduction, not only better than the corresponding single-atom Ni catalyst (Ni-N₂ C₂ ), but also higher than Ni₂ -N₇ and Ni₂ -N₅ C₂ DACs. Density functional theory (DFT) calculations revealed that the high electrocatalytic activity of Ni₂ -N₃ C₄ for CO₂ reduction could be attributed to the electronic structure modulation to the Ni centre and the resulted proper binding energies to COOH* and CO* intermediates.

The Dynamic Formation from Metal-Organic Frameworks of High-Density Platinum Single-Atom Catalysts with Metal-Metal Interactions

Single-atom catalysts (SACs) hold great promise for highly efficient heterogeneous catalysis, yet the practical applications require the development of high-density active sites with flexible geometric structures. The lack of understanding in the dynamic formation process of single atoms in the host framework has been plaguing the controllable synthesis of next generation SACs. Here using Co-based metal-organic frameworks (MOFs) as a starting substrate, we fully elucidated the formation of high-density Pt single atoms with inter-site interactions in derived Co₃ O₄ host. The cation exchange process and dynamic evolution of Pt-Pt interactions, organic ligand cleavage and Pt-oxygen coordination formation during the pyrolysis process have been unambiguously interpreted by a series of in situ/ex situ spectroscopic measurements and theoretical computation. These findings would direct the synthesis of high-density SACs with metal-metal interactions, which demonstrate significantly enhanced structural flexibility and catalytic properties.

Atomically Dispersed Janus Nickel Sites on Red Phosphorus for Photocatalytic Overall Water Splitting

Single‐atom nickel catalysts hold great promise for photocatalytic water splitting due to their plentiful active sites and cost‐effectiveness. Herein, we adopt a reactive‐group guided strategy to prepare atomically dispersed nickel catalysts on red phosphorus. The hydrothermal treatment of red phosphorus leads to the formation of P−H and P−OH groups, which behave as the reactive functionalities to generate the dual structure of single‐atom P−Ni and P−O−Ni catalytic sites. The produced single‐atom sites provide two different functions: P−Ni for water reduction and P−O−Ni for water oxidation. Benefitting from this specific Janus structure, Ni‐red phosphorus shows an elevated hydrogen evolution rate compared to Ni nanoparticle‐modified red phosphorus under visible‐light irradiation. The hydrogen evolution rate was additionally enhanced with increased reaction temperature, reaching 91.51 μmol h⁻¹ at 70 °C, corresponding to an apparent quantum efficiency of 8.9 % at 420 nm excitation wavelength.

Potential Applications of Nickel-Based Metal-Organic Frameworks and their Derivatives

Metal-Organic Frameworks (MOFs), a novel class of porous extended crystalline structures, are favored in different fields of heterogeneous catalysis, CO₂ separation and conversion, and energy storage (supercapacitors) due to their convenience of synthesis, structural tailor-ability, tunable pore size, high porosity, large specific surface area, devisable structures, and adjustable compositions. Nickel (Ni) is a ubiquitous element extensively applied in various fields of catalysis and energy storage due to its low cost, high abundance, thermal and chemical stability, and environmentally benign nature. Ni-based MOFs and their derivatives provide us with the opportunity to modify different properties of the Ni center to improve their potential as heterogeneous catalysts or energy storage materials. The recent achievements of Ni-MOFs and their derivatives as catalysts, membrane materials for CO₂ separation and conversion, electrode materials and their respective performance have been discussed in this review.

Quasi-Covalently Coupled Ni-Cu Atomic Pair for Synergistic Electroreduction of CO2

Developing highly active, selective, and stable electrocatalysts for the carbon dioxide reduction reaction (CO₂RR) is crucial to establish a CO₂ conversion system for industrial implementation and, therefore, to realize an artificially closed carbon loop. This can only be achieved through the rational material design based upon the knowledge of the operational active site at the molecular scale. Enlightened by theoretical screening, herein, we for the first time manipulate a novel Ni-Cu atomic pair configuration toward improved CO₂RR performance. Systematic characterizations and theoretical modeling reveal that the secondary Cu metal incorporation positively shifts the Ni 3d orbital energy to the Fermi level and thus accelerates the rate-determining step, *COOH formation. In addition, the intrinsic inactivity of Cu toward the competing hydrogen evolution reaction causes a considerable reaction barrier for water dissociation on the Ni-Cu moiety. Due to these attributes, the as-developed Ni/Cu-N-C catalyst exhibits excellent catalytic activity and selectivity, with a record-high turnover frequency of 20,695 h^-1 at -0.6 V (vs RHE) and a maximum Faradaic efficiency of 97.7% for CO production. Furthermore, the dynamic structure evolution monitored by operando X-ray absorption fine-structure spectroscopy unveils the interaction between the Ni center and CO₂ molecules and the synergistic effect of the Ni-Cu atomic pair on CO₂RR activity.

Single Ni active sites with a nitrogen and phosphorus dual coordination for an efficient CO2 reduction

Transition metal single-atom catalysts (SACs) have emerged as a research hotspot in CO₂RRs. However, tuning the electronic configuration of a metal single-atom by employing new heteroatoms still remains a challenge. Herein, a carbon matrix loaded with a N and P co-coordinated Ni single-atom (denoted as Ni-NPC) was prepared for an efficient CO₂RR. XANES and EXAFS were conducted to explore the coordination environment and charge distribution of the Ni-NPC catalyst. DFT calculations indicated that the Ni atom gained electrons from the P atom, and the Ni-NPC sample had a decreased energy barrier of +0.97 eV after doping with P atoms, which was favorable to overcome the limiting-step bottleneck for promoting CO₂RR. Due to the rich Ni atomic active sites and superior P-doping effect, Ni-NPC exhibited a maximum FE_CO of 92% with a high current density of 22.6 mA cm^-2 at -0.8V vs. RHE, which was far superior to those of NC, NPC and Ni-NC catalysts. Moreover, both the FE_CO and current density of the Ni-NPC catalyst remained stable for more than 16 h at -0.8 V vs. RHE, indicating a high stability for long-term CO₂RR experiments.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Catalytic potential of post-transition metal doped graphene-based single-atom catalysts for the CO2 electroreduction reaction

Catalysts are required to ensure electrochemical reduction of CO₂ to fuels proceeds at industrially acceptable rates and yields. As such, highly active and selective catalysts must be developed. Herein, a density functional theory study of p‐block element and noble metal doped graphene‐based single‐atom catalysts in two defect sites for the electrochemical reduction of CO₂ to CO and HCOOH is systematically undertaken. It is found that on all of the systems considered, the thermodynamic product is HCOOH. Pb/C₃, Pb/N₄ and Sn/C₃ are identified as having the lowest overpotential for HCOOH production while Al/C₃, Al/N₄, Au/C₃ and Ga/C₃ are identified as having the potential to form higher order products due to the strength of binding of adsorbed HCOOH.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

Techniques for the characterization of single atom catalysts

Single atom catalysts (SACs) are a hot research area recently. Over most of the SACs, the singly dispersed atoms are the active sites, which contribute to the catalytic activities significantly compared with a catalyst with continuously packed active sites. It is essential to determine whether SACs have been successfully synthesized. Several techniques have been applied for the characterization of the dispersion states of the active sites over SACs, such as Energy Dispersive X-ray spectroscopy (EDX), Electron Energy Loss Spectroscopy (EELS), etc. In this review, the techniques for the identification of the singly dispersed sites over SACs are introduced, the advantages and limitations of each technique are pointed out, and the future research directions have been discussed. It is hoped that this review will be helpful for a more comprehensive understanding of the characterization and detection methods involved in SACs, and stimulate and promote the further development of this emerging research field.

State of the art developments and prospects of metal-organic frameworks for energy applications

The progress on technologies for the cleaner and ecological transformation and storage of energy to combat effluence or pollution and the impending energy dilemma has recently attracted interest from energy research groups, particularly in the field of coordination chemistry, among inorganic chemists. Carriers for storing energy or facilitating mass and e^- transport are considered significant for energy conversion. Accordingly, considering their properties such as large surface area, low cost, customizable pore diameter, tunable topologies, low densities, and variable frameworks, MOFs (metal-organic frameworks) and their derivatives are well-suited for this purpose. MOFs are an innovative category of porous and crystalline materials, which have gained significant interest in recent years. Thus, herein, we highlight the state of the art progress on MOFs for energy-based applications, as perfect compounds and elements in compound assemblies for converting solar energy, lithium-ion arrays, fuel devices, hydrogen production, photocatalytic CO₂ reduction, proton conduction, etc. In addition, the substantial progress achieved in the production of various composites and derivatives containing MOFs with particular focus on supercapacitors and gas adsorption and storage is summarized, concentrating on the correlation between their coordination structural frameworks and applications in the field of energy. The current improved strategies, challenges, and future prospects are also presented in view of the coordination chemistry governing the structural modification of MOFs for energy applications.

Atomic Bridging Structure of Nickel-Nitrogen-Carbon for Highly Efficient Electrocatalytic Reduction of CO2

To meet strategic applications, electrochemical reduction of CO₂ into value-added chemical molecules would be improved by the rational design of advanced electrocatalysts with atomically dispersed active sites. Herein an electrospun-pyrolysis cooperative strategy is presented to not only modulate the porous structure of the carbon support for favorable charge and mass transfer, but also adjust the bridging structure of atomically dispersed metal species. Typically, the experimental results and theoretical calculations revealed that the unique chemical structure of binuclear nickel bridging with nitrogen and carbon atoms (namely Ni₂ -N₄ -C₂ ) tunes the electronic nature of the d-states for the optimal adsorption of carbon dioxide and intermediates, thus inducing the substantial enhancement of CO₂ reduction via the thermodynamically more favorable pathway. The identification of such a structure demonstrates the large space to modulate the atomic bridging status for optimizing electrocatalysis.

Polyoxometalate-Based Metal-Organic Framework as Molecular Sieve for Highly Selective Semi-Hydrogenation of Acetylene on Isolated Single Pd Atom Sites

Achieving highly selective acetylene semi-hydrogenation in an ethylene-rich gas stream is of great industrial importance. Herein, we construct isolated single Pd atom in a polyoxometalate-based metal-organic framework (POMOF). The unique internal environment allows this POMOF to separate acetylene from acetylene/ethylene gas mixtures and confine it close to the single Pd atom. After semi-hydrogenation, the resulting ethylene is preferentially discharged from the pores, achieving a selectivity of 92.6 %. First-principles simulations reveal that the adsorbed acetylene/ethylene molecules form hydrogen bond networks with oxygen atoms of SiW₁₂ O₄₀ ^4- and create dynamic confinement regions, which preferentially release the produced ethylene. Besides, at the Pd site, the over-hydrogenation of ethylene exhibits a higher reaction energy barrier than the semi-hydrogenation of acetylene. The combined advantages of POMOF and single Pd atom provides an effective approach for the regulation of semi-hydrogenation selectivity.

Reversible Ligand Exchange in Atomically Dispersed Catalysts for Modulating the Activity and Selectivity of the Oxygen Reduction Reaction

Rational control of the coordination environment of atomically dispersed catalysts is pivotal to achieve desirable catalytic reactivity. We report the reversible control of coordination structure in atomically dispersed electrocatalysts via ligand exchange reactions to reversibly modulate their reactivity for oxygen reduction reaction (ORR). The CO-ligated atomically dispersed Rh catalyst exhibited ca. 30-fold higher ORR activity than the NH_x -ligated catalyst, whereas the latter showed three times higher H₂ O₂ selectivity than the former. Post-treatments of the catalysts with CO or NH₃ allowed the reversible exchange of CO and NH_x ligands, which reversibly tuned oxidation state of metal centers and their ORR activity and selectivity. DFT calculations revealed that more reduced oxidation state of CO-ligated Rh site could further stabilize the *OOH intermediate, facilitating the two- and four-electron pathway ORR. The reversible ligand exchange reactions were generalized to Ir- and Pt-based catalysts.

Atomically Structural Regulations of Carbon-Based Single-Atom Catalysts for Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂ RR) converting CO₂ into value-added chemicals and fuels to realize carbon recycling is a solution to the problem of renewable energy shortage and environmental pollution. Among all the catalysts, the carbon-based single-atom catalysts (SACs) with isolated metal atoms immobilized on conductive carbon substrates have shown significant potential toward CO₂ RR, which intrigues researchers to explore high-performance SACs for fuel and chemical production by CO₂ RR. Especially, regulating the coordination structures of the metal centers and the microenvironments of the substrates in carbon-based SACs has emerged as an effective strategy for the tailoring of their CO₂ RR catalytic performance. In this review, the current in situ/operando study techniques and the fundamental parameters for CO₂ RR performance are first briefly presented. Furthermore, the recent advances in synthetic strategies which regulate the atomic structures of the carbon-based SACs, including heteroatom coordination, coordination numbers, diatomic metal centers, and the microenvironments of substrates are summarized. In particular, the structure-performance relationship of the SACs toward CO₂ RR is highlighted. Finally, the inevitable challenges for SACs are outlined and further research directions toward CO₂ RR are presented from the perspectives.

Synthesis of a Boron-Imidazolate Framework Nanosheet with Dimer Copper Units for CO2 Electroreduction to Ethylene

Fundamental understanding of the dependence between the structure and composition on the electrochemical CO₂ reduction reaction (CO₂ RR) would guide the rational design of highly efficient and selective electrocatalysts. A major impediment to the deep reduction CO₂ to multi-carbon products is the complexity of carbon-carbon bond coupling. The chemically well-defined catalysts with atomically dispersed dual-metal sites are required for these C-C coupling involved processes. Here, we developed a catalyst (BIF-102NSs) that features Cl^- bridged dimer copper (Cu₂ ) units, which delivers high catalytic activity and selectivity for C₂ H₄ . Mechanistic investigation verifies that neighboring Cu monomers not only perform as regulator for varying the reaction barrier, but also afford distinct reaction paths compared with isolated monomers, resulting in greatly improved electroreduction performance for CO₂ .

Fe3C-Assisted Single Atomic Fe Sites for Sensitive Electrochemical Biosensing

The rational construction of advanced sensing platforms to sensitively detect H₂O₂ produced by living cells is one of the challenges in both physiological and pathological fields. Owing to the extraordinary catalytic performances and similar metal coordination to natural metalloenzymes, single atomic site catalysts (SASCs) with intrinsic peroxidase (POD)-like activity have shown great promise for H₂O₂ detection. However, there still exists an obvious gap between them and natural enzymes because of the great challenge in rationally modulating the electronic and geometrical structures of central atoms. Note that the deliberate modulation of the metal-support interaction may give rise to the promising catalytic activity. In this work, an extremely sensitive electrochemical H₂O₂ biosensor based on single atomic Fe sites coupled with carbon-encapsulated Fe₃C crystals (Fe₃C@C/Fe-N-C) is proposed. Compared with the conventional Fe SASCs (Fe-N-C), Fe₃C@C/Fe-N-C exhibits superior POD-like activity and electrochemical H₂O₂ sensing performance with a high sensitivity of 1225 μA/mM·cm², fast response within 2 s, and a low detection limit of 0.26 μM. Significantly, sensitive monitoring of H₂O₂ released from living cells is also achieved. Moreover, the density functional theory calculations reveal that the incorporated Fe₃C nanocrystals donate electrons to single atomic Fe sites, endowing them with improved activation ability of H₂O₂ and further enhancing the overall activity. This work provides a new design of synergistically enhanced single atomic sites for electrochemical sensing applications.

Confining Chainmail-Bearing Ni Nanoparticles in N-doped Carbon Nanotubes for Robust and Efficient Electroreduction of CO2

It still remains challenging to simultaneously achieve high stability, selectivity, and activity in CO₂ reduction. Herein, a dual chainmail-bearing nickel-based catalyst (Ni@NC@NCNT) was fabricated via a solvothermal-evaporation-calcination approach. In situ encapsulated N-doped carbon layers (NCs) and nanotubes (NCNTs) gave a dual protection to the metallic core. The confined space well maintained the local alkaline pH value and suppressed hydrogen evolution. Large surface area and abundant pyridinic N and Ni^δ+ sites ensured high CO₂ adsorption capacity and strength. Benefitting from these, it delivered a CO faradaic efficiency of 94.1 % and current density of 48.0 mA cm^-2 at -0.75 and -1.10 V, respectively. Moreover, the performance remained unchanged after continuous electrolysis for 43 h, far exceeding Ni@NC with single chainmail, Ni@NC/NCNT with Ni@NC sitting on the walls of NCNT, bare NCNT and most state-of-the-art catalysts, demonstrating structural superiority of Ni@NC@NCNT. This work sheds light on designing unique architectures to improve electrochemical performances.

Recent Advances in the Engineering of Single-Atom Catalysts Through Metal-Organic Frameworks

This mini-review highlights some recent progress in the engineering of single-atom catalysts (SACs) through metal-organic frameworks (MOFs) and derivatives. The inherent molecular and chemical specificities within the MOFs and derivatives can offer stabilisation of the SACs with high atomic isolation and dispersion. As MOFs are often considered an infinite array of self-assembled molecular catalysts, specifically designed structures can provide further functionalities to suit the needs of different catalytic applications. In brief, we can divide the preparation approaches into three main categories: (1) fabrication onto functional groups of the ligands, (2) fabrication onto Lewis acid sites of nodal centres, and (3) synthesis via a pyrolysis-mediated technique. Through these approaches, strong metal-support interactions can be established to aid the fine-tuning of the catalytic properties. We also discuss how recent progress in the development of state-of-the-art microscopic, spectroscopic, and crystallographic techniques has enabled scientists to elucidate the structure-activity relationship.

Single-Atom and Dual-Atom Electrocatalysts Derived from Metal Organic Frameworks: Current Progress and Perspectives

Single-atom catalysts (SACs) have attracted increasing research interests owing to their unique electronic structures, quantum size effects and maximum utilization rate of atoms. Metal organic frameworks (MOFs) are good candidates to prepare SACs owing to the atomically dispersed metal nodes in MOFs and abundant N and C species to stabilize the single atoms. In addition, the distance of adjacent metal atoms can be turned by adjusting the size of ligands and adding volatile metal centers to promote the formation of isolated metal atoms. Moreover, the diverse metal centers in MOFs can promote the preparation of dual-atom catalysts (DACs) to improve the metal loading and optimize the electronic structures of the catalysts. The applications of MOFs derived SACs and DACs for electrocatalysis, including oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, carbon dioxide reduction reaction and nitrogen reduction reaction are systematically summarized in this Review. The corresponding synthesis strategies, atomic structures and electrocatalytic performances of the catalysts are discussed to provide a deep understanding of MOFs-based atomic electrocatalysts. The catalytic mechanisms of the catalysts are presented, and the crucial challenges and perspectives are proposed to promote further design and applications of atomic electrocatalysts.