Fine size control of platinum on carbon nanotubes: from single atoms to clusters

Clustering-Resistant Cu Single Atoms on Porous Au Nanoparticles Supported by TiO2 for Sustainable Photoconversion of CO2 into CH4

Photocatalysts based on single atoms (SAs) modification can lead to unprecedented reactivity with recent advances. However, the deactivation of SAs-modified photocatalysts remains a critical challenge in the field of photocatalytic CO2 reduction. In this study, we unveil the detrimental effect of CO intermediates on Cu single atoms (Cu-SAs) during photocatalytic CO2 reduction, leading to clustering and deactivation on TiO2. To address this, we developed a novel Cu-SAs anchored on Au porous nanoparticles (CuAu-SAPNPs-TiO2) via a vectored etching approach. This system not only enhances CH4 production with a rate of 748.8 μmol ⋅ g-1 ⋅ h-1 and 93.1 % selectivity but also mitigates Cu-SAs clustering, maintaining stability over 7 days. This sustained high performance, despite the exceptionally high efficiency and selectivity in CH4 production, highlights the CuAu-SAPNPs-TiO2 overarching superior photocatalytic properties. Consequently, this work underscores the potential of tailored SAs-based systems for efficient and durable CO2 reduction by reshaping surface adsorption dynamics and optimizing the thermodynamic behavior of the SAs.

Recent advancements and prospects in noble and non-noble electrocatalysts for materials methanol oxidation reactions

The direct methanol fuel cell (DMFC) represents a highly promising alternative power source for small electronics and automobiles due to its low operating temperatures, high efficiency, and energy density. The methanol oxidation process (MOR) constitutes a fundamental chemical reaction occurring at the positive electrode of a DMFC. Pt-based materials serve as widely utilized MOR electrocatalysts in DMFCs. Nevertheless, various challenges, such as sluggish reaction rates, high production costs primarily attributed to the expensive Pt-based catalyst, and the adverse effects of CO poisoning on the Pt catalysts, hinder the commercialization of DMFCs. Consequently, endeavors to identify an alternative catalyst to Pt-based catalysts that mitigate these drawbacks represent a critical focal point of DMFC research. In pursuit of this objective, researchers have developed diverse classes of MOR electrocatalysts, encompassing those derived from noble and non-noble metals. This review paper delves into the fundamental concept of MOR and its operational mechanisms, as well as the latest advancements in electrocatalysts derived from noble and non-noble metals, such as single-atom and molecule catalysts. Moreover, a comprehensive analysis of the constraints and prospects of MOR electrocatalysts, encompassing those based on noble metals and those based on non-noble metals, has been undertaken.

Ultra-Low-Potential Methanol Oxidation on Single-Ir-Atom Catalyst

Methanol oxidation plays a central role to implement sustainable energy economy, which is restricted by the sluggish reaction kinetics due to the multi-electron transfer process accompanied by numerous sequential intermediate. In this study, an efficient cascade methanol oxidation reaction is catalyzed by single-Ir-atom catalyst at ultra-low potential (<0.1 V) with the promotion of the thermal and electrochemical integration in a high temperature polymer electrolyte membrane electrolyzer. At the elevated temperature, the electron deficient Ir site with higher methanol affinity could spontaneous catalyze the CH3OH dehydrogenation to CO under the voltage, then the generated CO and H2 was electrochemically oxidized to CO2 and proton. However, the methanol cannot thermally decompose with the voltage absence, which confirm the indispensable of the coupling of thermal and electrochemical integration for the methanol oxidation. By assembling the methanol oxidation reaction with hydrogen evolution reaction with single-Ir-atom catalysts in the anode chamber, a max hydrogen production rate reaches 18 mol gIr -1 h-1, which is much greater than that of Ir nanoparticles and commercial Pt/C. This study also demonstrated the electrochemical methanol oxidation activity of the single atom catalysts, which broadens the renewable energy devices and the catalyst design by an integration concept.

Tunable Pt-NiO interaction-induced efficient electrocatalytic water oxidation and methanol oxidation

Metal-support interaction engineering is considered an efficient strategy for optimizing the catalytic activity. Nevertheless, the fine regulation of metal-support interactions as well as understanding the corresponding catalytic mechanisms (particularly those of non-carbon support-based counterparts) remains challenging. Herein, a controllable adsorption-impregnation strategy was proposed for the preparation of a porous nonlayered 2D NiO nanoflake support anchored with different forms of Pt nanoarchitectures, i.e. single atoms, clusters and nanoparticles. Benefiting from the unique porous architecture of NiO nanosheets, abundant active defect sites facilitated the immobilization of Pt single atoms onto the NiO crystal, resulting in NiO lattice distortion and thus changing the valence state of Pt, chemical bonding, and the coordination environment of the metal center. The synergy of the porous NiO support and the unexpected Pt single atom-NiO interactions effectively accelerated mass transfer and reduced the reaction kinetic barriers, contributing to a significantly enhanced mass activity of 5.59 A mgPt -1 at an overpotential of 0.274 V toward the electrocatalytic oxygen evolution reaction (OER) while 0.42 A mgPt -1 at a potential of 0.7 V vs. RHE for the methanol oxidation reaction (MOR) in an alkaline system, respectively. This work may offer fundamental guidance for developing metal-loaded/dispersed support nanomaterials toward electrocatalysis through the fine regulation of metal-support interactions.

Strategies Toward High Selectivity, Activity, and Stability of Single-Atom Catalysts

Single-atom catalysts (SACs) hold immense promise in facilitating the rational use of metal resources and achieving atomic economy due to their exceptional atom-utilization efficiency and distinct characteristics. Despite the growing interest in SACs, only limited reviews have holistically summarized their advancements centering on performance metrics. In this review, first, a thorough overview on the research progress in SACs is presented from a performance perspective and the strategies, advancements, and intriguing approaches employed to enhance the critical attributes in SACs are discussed. Subsequently, a comprehensive summary and critical analysis of the electrochemical applications of SACs are provided, with a particular focus on their efficacy in the oxygen reduction reaction , oxygen evolution reaction, hydrogen evolution reaction , CO2 reduction reaction, and N2 reduction reaction . Finally, the outline future research directions on SACs by concentrating on performance-driven investigation, where potential areas for improvement are identified and promising avenues for further study are highlighted, addressing challenges to unlock the full potential of SACs as high-performance catalysts.

Modification Strategies for Development of 2D Material-Based Electrocatalysts for Alcohol Oxidation Reaction

2D materials, such as graphene, MXenes (metal carbides and nitrides), graphdiyne (GDY), layered double hydroxides, and black phosphorus, are widely used as electrocatalyst supports for alcohol oxidation reactions (AORs) owing to their large surface area and unique 2D charge transport channels. Furthermore, the development of highly efficient electrocatalysts for AORs via tuning the structure of 2D support materials has recently become a hot area. This article provides a critical review on modification strategies to develop 2D material-based electrocatalysts for AOR. First, the principles and influencing factors of electrocatalytic oxidation of alcohols (such as methanol and ethanol) are introduced. Second, surface molecular functionalization, heteroatom doping, and composite hybridization are deeply discussed as the modification strategies to improve 2D material catalyst supports for AORs. Finally, the challenges and perspectives of 2D material-based electrocatalysts for AORs are outlined. This review will promote further efforts in the development of electrocatalysts for AORs.

Locally Ordered Single-Atom Catalysts for Electrocatalysis

Single-atom catalysts manifest nearly 100 % atom utilization efficiency, well-defined active sites, and high selectivity. However, their practical applications are hindered by a low atom loading density, uncontrollable location, and ambiguous interaction with the support, thereby posing challenges to maximizing their electrocatalytic performance. To address these limitations, the ability to arrange randomly dispersed single atoms into locally ordered single-atom catalysts (LO-SACs) substantially influences the electronic effect between reactive sites and the support, the synergistic interaction among neighboring single atoms, the bonding energy of intermediates with reactive sites and the complexity of the mechanism. As such, it dramatically promotes reaction kinetics, reduces the energy barrier of the reaction, improves the performance of the catalyst and simplifies the reaction mechanism. In this review, firstly, we introduce a variety of compelling characteristics of LO-SACs as electrocatalysts. Subsequently, the synthetic strategies, characterization methods and applications of LO-SACs in electrocatalysis are discussed. Finally, the future opportunities and challenges are elaborated to encourage further exploration in this rapidly evolving field.

Toward Electrocatalytic Methanol Oxidation Reaction: Longstanding Debates and Emerging Catalysts

The study of direct methanol fuel cells (DMFCs) has lasted around 70 years, since the first investigation in the early 1950s. Though enormous effort has been devoted in this field, it is still far from commercialization. The methanol oxidation reaction (MOR), as a semi-reaction of DMFCs, is the bottleneck reaction that restricts the overall performance of DMFCs. To date, there has been intense debate on the complex six-electron reaction, but barely any reviews have systematically discussed this topic. To this end, the controversies and progress regarding the electrocatalytic mechanisms, performance evaluations as well as the design science toward MOR electrocatalysts are summarized. This review also provides a comprehensive introduction on the recent development of emerging MOR electrocatalysts with a focus on the innovation of the alloy, core-shell structure, heterostructure, and single-atom catalysts. Finally, perspectives on the future outlook toward study of the mechanisms and design of electrocatalysts are provided.

Space-Confined Nucleation of Semimetal-Oxo Clusters within a [H7P8W48O184]33- Macrocycle: Synthesis, Structure, and Enhanced Proton Conductivity

Spatially confined assembly of semimetallic oxyanions (AsO₃^3- and SbO₃^3-) within a [H₇P₈W₄₈O₁₈₄]^33- (P₈W₄₈) macrocycle has afforded three nanoscale polyanions, [{As^III₅O₄(OH)₃}₂(P₈W₄₈O₁₈₄)]^32- (As₁₀), [(Sb^IIIOH)₄(P₈W₄₈O₁₈₄)]^32- (Sb₄), and [(Sb^IIIOH)₈(P₈W₄₈O₁₈₄)]^24- (Sb₈), which were crystallized as the hydrated mixed-cation salts (Me₂NH₂)₁₃K₇Na₂Li₁₀[{As^III₅O₄(OH)₃}₂(P₈W₄₈O₁₈₄)]·32H₂O (DMA-KNaLi-As₁₀), K₂₀Li₁₂[(Sb^IIIOH)₄(P₈W₄₈O₁₈₄)]·52H₂O (KLi-Sb₄), and (Me₂NH₂)₈K₆Na₅Li₅[(Sb^IIIOH)₈(P₈W₄₈O₁₈₄)]·65H₂O (DMA-KNaLi-Sb₈), respectively. A multitude of solid- and solution-state physicochemical techniques were employed to systematically characterize the structure and composition of the as-made compounds. The polyanion of As₁₀ represents the first example of a semimetal-oxo cluster-substituted P₈W₄₈ and accommodates the largest As^III-oxo cluster in polyoxometalates (POMs) reported to date. The number of incorporated SbO₃^3- groups in Sb₄ and Sb₈ could be customized by a simple variation of Sb^III-containing precursors. Encapsulation of semimetallic oxyanions inside P₈W₄₈ sets out a valid strategy not only for the development of host-guest assemblies in POM chemistry but also for their function expansion in emerging applications such as proton-conducting materials, for which DMA-KNaLi-As₁₀ showcases an outstanding conductivity of 1.2 × 10^-2 S cm^-1 at 85 °C and 70% RH.

Fabrication of high-performance carbon nanotube/copper composite fibers by interface thiol-modification

Carbon nanotube (CNT)/copper (Cu) composite fibers are placed great expectations as the next generation of light-weight, conductive wires. However, the electrical and mechanical performances still need to be enhanced. Herein, we demonstrate a strategy that is electrodeposition Cu on thiolated CNT fibers to solve the grand challenge which is enhancing the performance of CNT/Cu composite fibers. Thiol groups are introduced to the surface of the CNT fibers through a controllable O₂plasma carboxylation process and amide reaction. Compared with CNT/Cu composite fibers, there are 82.7% and 29.6% improvements in electrical conductivity and tensile strength of interface thiol-modification composite fibers. The enhancement mechanism is also explored that thiolated CNT fibers could make strong interactions between Cu and CNT, enhancing the electrical and mechanical performance of CNT/Cu composites. This work proposes a convenient, heat-treatment-free strategy for high-performance CNT/Cu composite fibers, which can be manufactured for large-scale production and applied to next-generation conductive wires.

Displacement Reaction-Assisted Synthesis of Sub-Nanometer Pt/Bi Boost Methanol-Tolerant Fuel Cells

The development of new synthetic methods for methanol-tolerant catalysts with improved performance is of fundamental importance for the commercialization of fuel cells. Herein, we reported a facile displacement reaction-assisted synthesis of graphene-supported sub-nanometer Pt/Bi catalysts (Pt/Bi/rGO). Bismuth (0) nanoparticles produced by NH₃BH₃ reduction can be further dissolved into the ethylene glycol, implying Bi(0) has a strong interaction with the hydroxyl group. That is the key interaction between Bi(0) and the functional group on the rGO to form the ultra-small Bi/rGO catalyst. Furthermore, Pt clusters are obtained by the displacement between Bi(0) and HPtCl₄ and are directly anchored to the rGO surface. The as-synthesized Pt/Bi/rGO catalyst exhibits high oxygen reduction mass activity and high tolerance to methanol poisoning. In the presence of 0.5 mol/L CH₃OH, the initial potential and activity of ORR were almost unchanged, which demonstrated great potential in the application of direct methanol fuel cells.

A Fullerene-Platinum Complex for Direct Functional Patterning of Single Metal Atom-Embedded Carbon Nanostructures

The development of patterning materials ("resists") at the nanoscale involves two distinct trends: one is toward high sensitivity and resolution for miniaturization, the other aims at functionalization of the resists to realize bottom-up construction of distinct nanoarchitectures. Patterning of carbon nanostructures, a seemingly ideal application for organic functional resists, has been highly reliant on complicated pattern transfer processes because of a lack of patternable precursors. Herein, we present a fullerene-metal coordination complex as a fabrication material for direct functional patterning of sub-10 nm metal-containing carbon structures. The attachment of one platinum atom per fullerene molecule not only leads to significant improvement of sensitivity and resolution but also enables stable atomic dispersion of the platinum ions within the carbon matrix, which may gain fundamentally new interest in functional patterning of hierarchical carbon nanostructures.

Single-Atom Catalysts: A Review of Synthesis Strategies and Their Potential for Biofuel Production

Biofuels have been derived from various feedstocks by using thermochemical or biochemical procedures. In order to synthesise liquid and gas biofuel efficiently, single-atom catalysts (SACs) and single-atom alloys (SAAs) have been used in the reaction to promote it. SACs are made up of single metal atoms that are anchored or confined to a suitable support to keep them stable, while SAAs are materials generated by bi- and multi-metallic complexes, where one of these metals is atomically distributed in such a material. The structure of SACs and SAAs influences their catalytic performance. The challenge to practically using SACs in biofuel production is to design SACs and SAAs that are stable and able to operate efficiently during reaction. Hence, the present study reviews the system and configuration of SACs and SAAs, stabilisation strategies such as mutual metal support interaction and geometric coordination, and the synthesis strategies. This paper aims to provide useful and informative knowledge about the current synthesis strategies of SACs and SAAs for future development in the field of biofuel production.

Single-atom catalyst for high-performance methanol oxidation

Single-atom catalysts have been widely investigated for several electrocatalytic reactions except electrochemical alcohol oxidation. Herein, we synthesize atomically dispersed platinum on ruthenium oxide (Pt₁/RuO₂) using a simple impregnation-adsorption method. We find that Pt₁/RuO₂ has good electrocatalytic activity towards methanol oxidation in an alkaline media with a mass activity that is 15.3-times higher than that of commercial Pt/C (6766 vs. 441 mA mg^‒1_Pt). In contrast, single atom Pt on carbon black is inert. Further, the mass activity of Pt₁/RuO₂ is superior to that of most Pt-based catalysts previously developed. Moreover, Pt₁/RuO₂ has a high tolerance towards CO poisoning, resulting in excellent catalytic stability. Ab initio simulations and experiments reveal that the presence of Pt‒O_3f (3-fold coordinatively bonded O)‒Ru_cus (coordinatively unsaturated Ru) bonds with the undercoordinated bridging O in Pt₁/RuO₂ favors the electrochemical dehydrogenation of methanol with lower energy barriers and onset potential than those encountered for Pt‒C and Pt‒Ru.

It is still challenging to engineer single-atom catalysts for electrocatalytic methanol oxidation. Here, the authors design Pt single atom supported on RuO2 for highly active methanol oxidation in contrast to the inert Pt single atom supported on carbon.

Rational Design of Single-Atom Site Electrocatalysts: From Theoretical Understandings to Practical Applications

Atomically dispersed metal-based electrocatalysts have attracted increasing attention due to their nearly 100% atomic utilization and excellent catalytic performance. However, current fundamental comprehension and summaries to reveal the underlying relationship between single-atom site electrocatalysts (SACs) and corresponding catalytic application are rarely reported. Herein, the fundamental understandings and intrinsic mechanisms underlying SACs and corresponding electrocatalytic applications are systemically summarized. Different preparation strategies are presented to reveal the synthetic strategies with engineering the well-defined SACs on the basis of theoretical principle (size effect, metal-support interactions, electronic structure effect, and coordination environment effect). Then, an overview of the electrocatalytic applications is presented, including oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, oxidation of small organic molecules, carbon dioxide reduction reaction, and nitrogen reduction reaction. The underlying structure-performance relationship between SACs and electrocatalytic reactions is also discussed in depth to expound the enhancement mechanisms. Finally, a summary is provided and a perspective supplied to demonstrate the current challenges and opportunities for rational designing, synthesizing, and modulating the advanced SACs toward electrocatalytic reactions.

Sulfur stabilizing metal nanoclusters on carbon at high temperatures

Supported metal nanoclusters consisting of several dozen atoms are highly attractive for heterogeneous catalysis with unique catalytic properties. However, the metal nanocluster catalysts face the challenges of thermal sintering and consequent deactivation owing to the loss of metal surface areas particularly in the applications of high-temperature reactions. Here, we report that sulfur-a documented poison reagent for metal catalysts-when doped in a carbon matrix can stabilize ~1 nanometer metal nanoclusters (Pt, Ru, Rh, Os, and Ir) at high temperatures up to 700 °C. We find that the enhanced adhesion strength between metal nanoclusters and the sulfur-doped carbon support, which arises from the interfacial metal-sulfur bonding, greatly retards both metal atom diffusion and nanocluster migration. In catalyzing propane dehydrogenation at 550 °C, the sulfur-doped carbon supported Pt nanocluster catalyst with interfacial electronic effects exhibits higher selectivity to propene as well as more stable durability than sulfur-free carbon supported catalysts.

Platinum-Based Electrocatalysts for Direct Alcohol Fuel Cells: Enhanced Performances toward Alcohol Oxidation Reactions

In the past few decades, Pt-based electrocatalysts have attracted great interests due to their high catalytic performances toward the direct alcohol fuel cell (DAFC). However, the high cost, poor stability, and the scarcity of Pt have markedly hindered their large-scale utilization in commerce. Therefore, enhancing the activity and durability of Pt-based electrocatalysts, reducing the Pt amount and thus the cost of DAFC have become the keys for their practical applications. In this minireview, we summarized some basic concepts to evaluate the catalytic performances in electrocatalytic alcohol oxidation reaction (AOR) including electrochemical active surface area, activity and stability, the effective approaches for boosting the catalytic AOR performance involving size decrease, structure and morphology modulation, composition effect, catalyst supports, and assistance under other external energies. Furthermore, we also presented the remaining challenges of the Pt-based electrocatalysts to achieve the fabrication of a real DAFC.

Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

Soft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm-1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

Design of Organic/Inorganic Hybrid Catalysts for Energy and Environmental Applications

Controlling selectivity between competing reaction pathways is crucial in catalysis. Several approaches have been proposed to achieve this goal in traditional heterogeneous catalysts including tuning nanoparticle size, varying alloy composition, and controlling supporting material. A less explored and promising research area to control reaction selectivity is via the use of hybrid organic/inorganic catalysts. These materials contain inorganic components which serve as sites for chemical reactions and organic components which either provide diffusional control or directly participate in the formation of active site motifs. Despite the appealing potential of these hybrid materials to increase reaction selectivity, there are significant challenges to the rational design of such hybrid nanostructures. Structural and mechanistic characterization of these materials play a key role in understanding and, therefore, designing these organic/inorganic hybrid catalysts. This Outlook highlights the design of hybrid organic/inorganic catalysts with a brief overview of four different classes of materials and discusses the practical catalytic properties and opportunities emerging from such designs in the area of energy and environmental transformations. Key structural and mechanistic characterization studies are identified to provide fundamental insight into the atomic structure and catalytic behavior of hybrid organic/inorganic catalysts. Exemplary works are used to show how specific active site motifs allow for remarkable changes in the reaction selectivity. Finally, to demonstrate the potential of hybrid catalyst materials, we suggest a characterization-based approach toward the design of biomimetic hybrid organic/inorganic materials for a specific application in the energy and environmental research space: the conversion of methane into methanol.

Controlling the Oxidation State of Pt Single Atoms for Maximizing Catalytic Activity

Single-atom catalysts (SACs) have emerged as promising materials in heterogeneous catalysis. Previous studies reported controversial results about the relative level in activity for SACs and nanoparticles (NPs). These works have focused on the effect of metal atom arrangement, without considering the oxidation state of the SACs. Here, we immobilized Pt single atoms on defective ceria and controlled the oxidation state of Pt SACs, from highly oxidized (Pt⁰ : 16.6 at %) to highly metallic states (Pt⁰ : 83.8 at %). The Pt SACs with controlled oxidation states were then employed for oxidation of CO, CH₄ , or NO, and their activities compared with those of Pt NPs. The highly oxidized Pt SACs presented poorer activities than Pt NPs, whereas metallic Pt SACs showed higher activities. The Pt SAC reduced at 300 °C showed the highest activity for all the oxidations. The Pt SACs with controlled oxidation states revealed a crucial missing link between activity and SACs.

Improving the Catalytic Activity of Carbon-Supported Single Atom Catalysts by Polynary Metal or Heteroatom Doping

Single atom catalysts (SACs) are widely researched in various chemical transformations due to the high atomic utilization and catalytic activity. Carbon-supported SACs are the largest class because of the many excellent properties of carbon derivatives. The single metal atoms are usually immobilized by doped N atoms and in some cases by C geometrical defects on carbon materials. To explore the catalytic mechanisms and improve the catalytic performance, many efforts have been devoted to modulating the electronic structure of metal single atomic sites. Doping with polynary metals and heteroatoms has been recently proposed to be a simple and effective strategy, derived from the modulating mechanisms of metal alloy structure for metal catalysts and from the donating/withdrawing heteroatom doping for carbon supports, respectively. Polynary metals SACs involve two types of metal with atomical dispersion. The bimetal atom pairs act as dual catalytic sites leading to higher catalytic activity and selectivity. Polynary heteroatoms generally have two types of heteroatoms in which N always couples with another heteroatom, including B, S, P, etc. In this Review, the recent progress of polynary metals and heteroatoms SACs is summarized. Finally, the barriers to tune the activity/selectivity of SACs are discussed and further perspectives presented.

Intrinsic Effect of Carbon Supports on the Activity and Stability of Precious Metal Based Catalysts for Electrocatalytic Alcohol Oxidation in Fuel Cells: A Review

Electrocatalyst supports, in particular carbonaceous materials, play critical roles in the electrocatalytic activity and stability of precious metal group (PMG)-based catalysts such as Pt, Pd, and Au for the electrochemical alcohol oxidation reaction (AOR) of fuels such as methanol and ethanol in polymer electrolyte membrane fuel cells (PEMFCs). Carbonaceous supports such as high surface area carbon provide electronic contact throughout the catalyst layer, isolate PMG nanoparticles (NPs) to maintain high electrochemical surface area, and provide hydrophobic properties to avoid flooding of the catalyst layer by liquid water produced. Compared to high surface area carbon, PMG catalysts supported on 1D and 2D carbon materials such as graphene and carbon nanotubes show enhanced activity and durability due to the intrinsic effect of the underlying carbonaceous supports on the electronic states of PMG NPs. The modification of the electronic environment, in particular the d-band centers of PMG NPs, weakens the adsorption of AOR intermediates, facilitates breaking of the C-C bonds, and thus enhances the electrocatalytic activity of PMG catalysts. The doping of heteroatoms further facilitates the electrocatalytic activity for the AOR through the structural, bifunctional, and electronic effects, in addition to the enhanced dispersion of PMG NPs in the carbon support. The prospects for the development of effective PMG-based catalysts for high-performance alcohol-fuel-based PEMFCs is discussed.

On the Controlled Loading of Single Platinum Atoms as a Co-Catalyst on TiO2 Anatase for Optimized Photocatalytic H2 Generation

Single-atom (SA) catalysis is a novel frontline in the catalysis field due to the often drastically enhanced specific activity and selectivity of many catalytic reactions. Here, an atomic-scale defect engineering approach to form and control traps for platinum SA sites as co-catalyst for photocatalytic H₂ generation is described. Thin sputtered TiO₂ layers are used as a model photocatalyst, and compared to the more frequently used (001) anatase sheets. To form stable SA platinum, the TiO₂ layers are reduced in Ar/H₂ under different conditions (leading to different but defined Ti³⁺ -O_v surface defects), followed by immersion in a dilute hexachloroplatinic acid solution. HAADF-STEM results show that only on the thin-film substrate can the density of SA sites be successfully controlled by the degree of reduction by annealing. An optimized SA-Pt decoration can enhance the normalized photocatalytic activity of a TiO₂ sputtered sample by 150 times in comparison to a conventional platinum-nanoparticle-decorated TiO₂ surface. HAADF-STEM, XPS, and EPR investigation jointly confirm the atomic nature of the decorated Pt on TiO₂ . Importantly, the density of the relevant surface exposed defect centers-thus the density of Pt-SA sites, which play the key role in photocatalytic activity-can be precisely optimized.

Subnano Amorphous Fe-Based Clusters with High Mass Activity for Efficient Electrocatalytic Oxygen Reduction Reaction

The development of cost-effective and efficient oxygen-relative electrocatalysts with high mass activity is extremely critical for modern sustainable fuel cells. Here, we present a new type of subnano amorphous transition-metal clusters supported on a hierarchical carbon framework as a promising oxygen reduction reaction (ORR) electrocatalyst, synthesized by a novel "amino-induced spatial confinement" strategy. This developed Fe subnano-cluster/3D-C could deliver outstanding ORR performance with a large mass activity of ∼8600 A g_Fe^-1 at a half-wave potential of 0.92 V, ∼10 times that of the benchmarking Pt/C electrocatalyst. The atomic characterizations and theoretical calculations jointly reveal the robust surface-covalent Fe-N bonds, and the synergistic effect of hetero Fe^2+/0 species is essentially beneficial for the adsorption of *O₂ and the formation of key *O intermediate during the ORR process, contributing to high oxygen-relative electrocatalytic activity for subnano amorphous Fe clusters.

Nitrogen Doped Carbon Nanotubes and Nanofibers for Green Hydrogen Production: Similarities in the Nature of Nitrogen Species, Metal–Nitrogen Interaction, and Catalytic Properties

The effect of nitrogen doped bamboo-like carbon nanotubes (N–CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homogeneous precipitation routes led to the formation of electron-deficient platinum stabilized by pyridinic nitrogen sites of the N–CNTs. The electron-deficient platinum species strongly enhanced the activity and selectivity of the Pt/N–CNTs catalysts when compared to the catalysts containing mainly metallic platinum nanoparticles. A comparison of bamboo-like N–CNTs and herring-bone nitrogen doped carbon nanofibers (N–CNFs) as the catalyst support allowed us to conclude that the catalytic properties of supported platinum are determined by its locally one-type interaction with pyridinic nitrogen sites of the N–CNTs or N–CNFs irrespective of substantial structural differences between nanotubes and nanofibers.

High temperature shockwave stabilized single atoms

The stability of single-atom catalysts is critical for their practical applications. Although a high temperature can promote the bond formation between metal atoms and the substrate with an enhanced stability, it often causes atom agglomeration and is incompatible with many temperature-sensitive substrates. Here, we report using controllable high-temperature shockwaves to synthesize and stabilize single atoms at very high temperatures (1,500-2,000 K), achieved by a periodic on-off heating that features a short on state (55 ms) and a ten-times longer off state. The high temperature provides the activation energy for atom dispersion by forming thermodynamically favourable metal-defect bonds and the off-state critically ensures the overall stability, especially for the substrate. The resultant high-temperature single atoms exhibit a superior thermal stability as durable catalysts. The reported shockwave method is facile, ultrafast and universal (for example, Pt, Ru and Co single atoms, and carbon, C₃N₄ and TiO₂ substrates), which opens a general route for single-atom manufacturing that is conventionally challenging.

Hydrogen Diffusion Guided Design of Pt-Based Alloys for Inhibition of Butadiene Over-Hydrogenation

Alloying Pt with other metals is an effective strategy to tune its performance towards selective hydrogenation reactions. Herein, we have demonstrated a process to screen Pt-based alloys for inhibition of butadiene over-hydrogenation with a model comprising isolated single atoms (ISA) embedded into Pt(111). DFT calculations reveal that the diffusion energy barrier of H co-adsorbed with 1-butene is a key parameter for the screening. The output from the ISA model was validated by testing several typical Pt-based alloys towards butadiene hydrogenation. Furthermore, an unexpected higher selectivity to cis-2-butene compared to the trans isomer and 1-butene over the PtZn alloy was explored employing the ISA model.

Ultralow-temperature photochemical synthesis of atomically dispersed Pt catalysts for the hydrogen evolution reaction

Efficient control of nucleation is a prerequisite for the solution-phase synthesis of nanocrystals. Although the thermodynamics and kinetics of the formation of metal nanoparticles have been largely investigated, fully suppressing the nucleation in solution synthesis remains a major challenge due to the high surface free energy of isolated atoms. In this article, we largely decreased the reaction temperature for ultraviolet (UV) photochemical reduction of H2PtCl6 solution to -60 °C and demonstrated such a method as a fast and convenient process for the synthesis of atomically dispersed Pt. We showed that the ultralow-temperature reaction efficiently inhibited the nucleation process by controlling its thermodynamics and kinetics. Compared with commercial platinum/carbon, the synthesized atomically dispersed Pt catalyst, as a superior HER catalyst, exhibited a lower overpotential of approximately 55 mV at a current density of 100 mA cm-2 and a lower Tafel slope of 26 mV dec-1 and had higher stability in 0.5 M H2SO4.

Platinum single-atom catalysts: a comparative review towards effective characterization

This review summaries the characterization techniques for Pt single-atom catalysts and focuses on FT-EXAFS spectroscopy to study the coordination environment of Pt–M for atomically dispersed Pt catalysts on diverse supports.

Combined determination of copper ions and β-amyloid peptide by a single ratiometric electrochemical biosensor

Copper ions (Cu²⁺) play a critical role in biological processes and are directly involved in β-amyloid peptide (Aβ) aggregation, which is responsible for the occurrence and development of Alzheimer's disease (AD). Therefore, combined determination of Cu²⁺ and Aβ in one analytical system is of great significance to understand the exact nature of the AD event. This work presents a novel ratiometric electrochemical biosensor for the dual determination of Cu²⁺ and Aβ_1-42. This unique sensor is based on a 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulphonate) (ABTS) and poly(diallyldimethylammonium chloride) (PDDA)-bi functionalized single-walled carbon nanotubes (ABTS-PDDA/CNTs) composite. The inclusion of ABTS not only enhanced the sensitivity, but it also acted as an inner reference molecule to improve detection accuracy. The specific recognition of Cu²⁺ was realized by neurokinin B (NKB) coatings on the ABTS-PDDA/CNTs surface to form a [Cu^II(NKB)₂] complex with Cu²⁺. The ABTS-PDDA/CNTs-NKB modified electrode also displayed an excellent electrochemical response toward the Aβ_1-42 monomer, when a certain amount of the Aβ_1-42 monomer was added to Cu²⁺-contained PBS buffer, which was due to the release of Cu²⁺ from the [Cu^II(NKB)₂] complex through Aβ binding to Cu²⁺. Meanwhile, our work showed that Cu²⁺ bound Aβ_1-42 was concentration-dependent. Consequently, the presented electrochemical approach was capable of quantifying two important biological species associated with AD by one single biosensor, with the detection limits of 0.04 μM for Cu²⁺ and 0.5 ng mL^-1 for Aβ_1-42, respectively. Finally, the ratiometric electrode was successfully applied for monitoring Cu²⁺ and Aβ_1-42 variations in plasma and hippocampus of normal and AD rats.

Stability investigation of a high number density Pt1/Fe2O3 single-atom catalyst under different gas environments by HAADF-STEM

Catalysis by supported single metal atoms has demonstrated tremendous potential for practical applications due to their unique catalytic properties. Unless they are strongly anchored to the support surfaces, supported single atoms, however, are thermodynamically unstable, which poses a major obstacle for broad applications of single-atom catalysts (SACs). In order to develop strategies to improve the stability of SACs, we need to understand the intrinsic nature of the sintering processes of supported single metal atoms, especially under various gas environments that are relevant to important catalytic reactions. We report on the synthesis of high number density Pt₁/Fe₂O₃ SACs using a facial strong adsorption method and the study of the mobility of these supported Pt single atoms at 250 °C under various gas environments that are relevant to CO oxidation, water-gas shift, and hydrogenation reactions. Under the oxidative gas environment, Fe₂O₃ supported Pt single atoms are stable even at high temperatures. The presence of either CO or H₂ molecules in the gas environment, however, facilitates the movement of the Pt atoms. The strong interaction between CO and Pt weakens the binding between the Pt atoms and the support, facilitating the movement of the Pt single atoms. The dissociation of H₂ molecules on the Pt atoms and their subsequent interaction with the oxygen species of the support surfaces dislodge the surface oxygen anchored Pt atoms, resulting in the formation of Pt clusters. The addition of H₂O molecules to the CO or H₂ significantly accelerates the sintering of the Fe₂O₃ supported Pt single atoms. An anchoring-site determined sintering mechanism is further proposed, which is related to the metal-support interaction.