Surface Enrichment and Depletion Effects of Ions Dissolved in an Ionic Liquid: An X-ray Photoelectron Spectroscopy Study

Exploring the interfacial behavior of ruthenium complexes in ionic liquids: implications for supported ionic liquid phase catalysts

The interaction of metal complexes with ionic liquids, with a particular focus on the stability and surface concentration of the metal centers, is crucial in applications involving catalysts based on supported ionic liquids. In this study, we synthesized the complexes [Ru(tpy)(bpy)Cl][PF6] and [Ru(tpy)(dcb)Cl][PF6] (tpy = 2,2',2''-terpyridine, bpy = 2,2'-bipyridine, dcb = 4,4'-dicarboxy-2,2'-bipyridine) and we prepared solutions using the ionic liquids (ILs) 1-ethyl-3-methylimidazolium acetate [C2C1Im][OAc] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4C1Im][PF6]. The chemical environment of the Ru(II) metal center and the interfacial behavior of the complexes in the different IL solutions were determined using angle-resolved X-ray photoelectron spectroscopy (ARXPS). In [C4C1Im][PF6], [Ru(tpy)(bpy)Cl][PF6] maintains its chemical structure, while in [C2C1Im][OAc], partial changes in the chemical environment of the Ru center are indicated by XPS, likely due to ligand exchange. The presence of carboxylic acid functional groups in the bipyridyl ligand seems to inhibit this ligand exchange. The investigated complexes do not exhibit surface activity but are depleted from the IL/gas interface. These findings hold significance for the design of new supported ionic liquid phase catalysts based on Ru complexes.

The Surface of Ionic Liquids in Water: From an Ionic Tug of War to a Quasi-Ordered Two-Dimensional Layer

The sustainable development encompasses the search for new materials for energy storage, gas capture, separation, and solvents in industrial processes that can substitute conventional ones in an efficient and clean manner. Ionic liquids (ILs) emerged and have been advanced as alternative materials for such applications, but an obstacle is their hygroscopicity and the effects on their physical properties in the presence of humidity. Several industrial processes depend on the aqueous interfacial properties, and the main focus of this work is the water/IL interface. The behavior of the aqueous ionic liquids at the water-vacuum interface is representative for their water interfacial properties. Using X-ray photoelectron spectroscopy in combination with molecular dynamics simulations we investigate four aqueous IL systems, and provide molecular level insight on the interfacial behaviour of the ionic liquids, such as ion-pair formation, orientation and surface concentration. We find that ionic liquids containing a chloride anion have a lowered surface enrichment due to the low surface propensity of chloride. In contrast, the ionic liquids containing a bistriflimide anion are extremely surface-enriched due to cooperative surface propensity between the cations and anions, forming a two-dimensional ionic liquid on the water surface at low concentrations.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C3 CNC1 Im][Tf2 N] and [C1 CNC1 Pip][Tf2 N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design

The targeted enrichment of a Pt complex with an ionic liquid (IL)-derived ligand system in IL solution is demonstrated by using angle-resolved X-ray photoelectron spectroscopy. When the ligand system is complemented with fluorinated side chains, the complex accumulates strongly at the IL/gas interface, while in an equivalent solution of a complex without these substituents no such effect could be observed. This buoy-like behavior induces strong population of the complex at the outermost molecular layer close to surface saturation, which was studied over a range from 5 to 30 %_mol . The surface enrichment was found to be most efficient at the lowest concentration, which is particularly favorable for catalytic applications such as supported ionic-liquid-phase (SILP) catalysis.

Tuning the Cation-Anion Interactions by Methylation of the Pyridinium Cation: An X-ray Photoelectron Spectroscopy Study of Picolinium Ionic Liquids

X-ray photoelectron spectroscopy is used to investigate the impact of methylation on the electronic environment of pyridinium cations. Because of the electron-donating effect of the methyl group, there is a significant increase in electron density on the cationic nitrogen. The shift of the N 1s binding energy is inversely proportional to the anion basicity. The methylation position on the electronic environment of the cationic nitrogen is investigated. The N 1s binding energy follows the trend: 1-octylpyridinium > 1-octyl-3-picolinium > 1-octyl-4-picolinium > 1-octyl-2-picolinium, which is in good agreement with the cation acidity. The increase in the inductive effect subsequently weakens the cation-anion interactions through charge transfer from the anion to the cation, causing a subtle change in the electronic environment of the anion. Such an effect is noticeably reflected in the Br 3d binding energy. It shows that the Br 3d_5/2 binding energy of 1-octyl-2-picolinium bromide is 0.2 eV lower than that of 1-octylpyridinium bromide.

X-ray photoelectron spectroscopy of piperidinium ionic liquids: a comparison to the charge delocalised pyridinium analogues

In this study, nine piperidinium-based ionic liquids are analysed by X-ray photoelectron spectroscopy. The effect of alkyl substituent length and the nature of the anion on the electronic environment of the cation are investigated. The electronic environment of the hetero carbon and the cationic nitrogen is compared between two structurally similar cations, 1-octyl-1-methylpiperidinium ([C8C1Pip]+) versus 1-octylpyridinium ([C8Py]+). Due to the charge delocalisation, the hetero carbon component within [C8Py]+ is more positively charged, which exhibits much higher binding energy; whilst the cationic nitrogen component is in the similar electronic environment. The impact of the charge delocalisation on the electronic environment of the anion is also compared between [C8C1Pip]+ and [C8Py]+. It is found that for the more basic anion, the cation can significantly affect the electronic environment of the anion; for the less basic anion, such an effect concentrates on the component bearing more negative point charges.

In Situ Tracking of Organic Reactions at the Vapor/Liquid Interfaces of Ionic Liquids

The molecular structures of ionic liquids at interfaces play a crucial role in determining their chemical activities in applications. In situ X-ray photoelectron spectroscopy (XPS) was used to track the evolution of X-ray irradiation-induced chemical reactions in a series of ionic liquids ([C_n mim][AuCl₄ ]; n=4, 6, 8, 10) on the Si (111) single-crystal surface. Analyses of microstructure and chemical bonding based on the XPS results indicated that reactions occurred at the vapor/liquid interfaces of the ionic liquids. The time-resolved XPS spectra revealed that with increasing irradiation time, the intensity of the peak corresponding to trivalent Au anion decreased for the four ionic liquids as Au was continually reduced to a lower chemical state and finally converted to gold nanoparticles. The rate and conversion of the reaction were associated with the length of the alkyl chain of the ionic liquids cation. Molecular dynamics simulations further revealed that the alkyl chain of the cation in the ionic liquids was oriented towards the vacuum environment at the vapor/liquid interface. Our results provide a real-time atomic-scale experimental evidence of organic reactions at the vapor/liquid interfaces of ionic liquids. The findings are important for understanding the roles of ionic liquids in catalysis, separation, electrochemistry, functional materials, and so on.

X-ray-Induced Fragmentation of Imidazolium-Based Ionic Liquids Studied by Soft X-ray Absorption Spectroscopy

We investigated the X-ray absorption spectroscopy (XAS) fingerprint of EMImTFSI ionic liquid (IL) and its fragmentation products created by X-ray irradiation. To accomplish this, we used an open geometry where an IL droplet is directly exposed in the vacuum chamber and an enclosed geometry where the IL is confined in a cell covered by an X-ray transparent membrane. In the open geometry, the XAS signature was stable and consistent with experimental and theoretical spectra reported in the literature. In contrast, when the IL is enclosed, its XAS evolves continuously under X-ray illumination due to the accumulation of volatile fragmentation products inside the closed cell, while they evaporate in the open geometry. The changes in the XAS from the core levels of relevant elements (C, N, S, F) together with density functional theory calculations allowed us to identify the chemical nature of the fragment products and the chemical bonds most vulnerable to rupture under soft X-ray irradiation.

Ionic Liquid Crystals: Versatile Materials

This Review covers the recent developments (2005-2015) in the design, synthesis, characterization, and application of thermotropic ionic liquid crystals. It was designed to give a comprehensive overview of the "state-of-the-art" in the field. The discussion is focused on low molar mass and dendrimeric thermotropic ionic mesogens, as well as selected metal-containing compounds (metallomesogens), but some references to polymeric and/or lyotropic ionic liquid crystals and particularly to ionic liquids will also be provided. Although zwitterionic and mesoionic mesogens are also treated to some extent, emphasis will be directed toward liquid-crystalline materials consisting of organic cations and organic/inorganic anions that are not covalently bound but interact via electrostatic and other noncovalent interactions.

Dual analyzer system for surface analysis dedicated for angle-resolved photoelectron spectroscopy at liquid surfaces and interfaces

The investigation of liquid surfaces and interfaces with the powerful toolbox of ultra-high vacuum (UHV)-based surface science techniques generally has to overcome the issue of liquid evaporation within the vacuum system. In the last decade, however, new classes of liquids with negligible vapor pressure at room temperature-in particular, ionic liquids (ILs)-have emerged for surface science studies. It has been demonstrated that particularly angle-resolved X-ray Photoelectron Spectroscopy (ARXPS) allows for investigating phenomena that occur at gas-liquid and liquid-solid interfaces on the molecular level. The results are not only relevant for IL systems but also for liquids in general. In all of these previous ARXPS studies, the sample holder had to be tilted in order to change the polar detection angle of emitted photoelectrons, which restricted the liquid systems to very thin viscous IL films coating a flat solid support. We now report on the concept and realization of a new and unique laboratory "Dual Analyzer System for Surface Analysis (DASSA)" which enables fast ARXPS, UV photoelectron spectroscopy, imaging XPS, and low-energy ion scattering at the horizontal surface plane of macroscopically thick non-volatile liquid samples. It comprises a UHV chamber equipped with two electron analyzers mounted for simultaneous measurements in 0° and 80° emission relative to the surface normal. The performance of DASSA on a first macroscopic liquid system will be demonstrated.

Supported ionic-liquid-phase-stabilized Au(iii) catalyst for acetylene hydrochlorination

Using high-valent Au(iii) catalysis is highly desirable in many reactions; however it is plagued by the poor stability of Au(iii) complexes.

An ARXPS and ERXPS study of quaternary ammonium and phosphonium ionic liquids: utilising a high energy Ag Lα′ X-ray source

A series of ammonium- and phosphonium-based ionic liquids have been probed using X-ray photoelectron spectroscopy (XPS) with a high energy Ag Lα′ X-ray source.

Ultrafast excited states dynamics of [Ru(bpy)3]2+ dissolved in ionic liquids

In this work, we demonstrate the potential of room-temperature ionic liquids as solvents to investigate the excited states dynamics of [Ru(bpy)₃]²⁺ by means of time-resolved photoelectron spectroscopy.

Pd Nanoparticle Formation in Ionic Liquid Thin Films Monitored by in situ Vibrational Spectroscopy

Ionic liquids (ILs) are flexible reaction media and solvents for the synthesis of metal nanoparticles (NPs). Here, we describe a new preparation method for metallic NPs in nanometer thick films of ultraclean ILs in an ultrahigh vacuum (UHV) environment. CO-covered Pd NPs are formed by simultaneous and by sequential physical vapor deposition (PVD) of the IL and the metal in the presence of low partial pressures of CO. The film thickness and the particle size can be controlled by the deposition parameters. We followed the formation of the NPs and their thermal behavior by time-resolved IR reflection absorption spectroscopy (TP-IRAS) and by temperature-programmed IRAS (TR-IRAS). Codeposition of Pd and [C1C2Im][OTf] in CO at 100 K leads to the growth of homogeneous multilayer films of CO-covered Pd aggregates in an IL matrix. The size of these NPs can be controlled by the metal fraction in the co-deposit. With increasing metal fraction, the size of the Pd NPs also increases. At very low metal content, small Pd carbonyl-like species are formed, which bind CO in on-top geometry only. Upon annealing, the [OTf](-) anion coadsorbs at the NP surface and partially displaces CO. Co-adsorption of CO and IL is indicated by a strong red-shift of the CO stretching bands. While the weakly bound on-top CO is mainly replaced below the melting transition of the IL, coadsorbate shells with bridge-bonded CO and IL are stable well above the melting point. Larger three-dimensional Pd NPs can be prepared by PVD of Pd onto a solid [C1C2Im][OTf] film at 100 K. Upon annealing, on-top CO desorbs from these NPs below 200 K. Upon melting of the IL film, the CO-covered Pd NPs immerse into the IL and again form a stable coadsorbate shell that consists of bridge-bonded CO and the IL.

Reactions of Superoxide with Iron Porphyrins in the Bulk and the Near-Surface Region of Ionic Liquids

The redox reaction of superoxide (KO2) with highly charged iron porphyrins (Fe(P4+), Fe(P8+), and Fe(P8-)) has been investigated in the ionic liquids (IL) [EMIM][Tf2N] (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and [EMIM][B(CN)4] (1-ethyl-3-methylimidazolium tetracyanoborate) by using time-resolved UV/vis stopped-flow, electrochemistry, cryospray mass spectrometry, EPR, and XPS measurements. Stable KO2 solutions in [EMIM][Tf2N] can be prepared up to a 15 mM concentration and are characterized by a signal in EPR spectrum at g = 2.0039 and by the 1215 cm(-1) stretching vibration in the resonance Raman spectrum. While the negatively charged iron porphyrin Fe(P8-) does not react with superoxide in IL, Fe(P4+) and Fe(P8+) do react in a two-step process (first a reduction of the Fe(III) to the Fe(II) form, followed by the binding of superoxide to Fe(II)). In the reaction with KO2, Fe(P4+) and Fe(P8+) show similar rate constants (e.g., in the case of Fe(P4+): k1 = 18.6 ± 0.5 M(-1) s(-1) for the first reaction step, and k2 = 2.8 ± 0.1 M(-1) s(-1) for the second reaction step). Notably, these rate constants are four to five orders of magnitude lower in [EMIM][Tf2N] than in conventional solvents such as DMSO. The influence of the ionic liquid is also apparent during electrochemical experiments, where the redox potentials for the corresponding Fe(III)/Fe(II) couples are much more negative in [EMIM][Tf2N] than in DMSO. This modified redox and kinetic behavior of the positively charged iron porphyrins results from their interactions with the anions of the ionic liquid, while the nucleophilicity of the superoxide is reduced by its interactions with the cations of the ionic liquid. A negligible vapor pressure of [EMIM][B(CN)4] and a sufficient enrichment of Fe(P8+) in a close proximity to the surface enabled XPS measurements as a case study for monitoring direct changes in the electronic structure of the metal centers during redox processes in solution and at liquid/solid interfaces.

Fine tuning the ionic liquid–vacuum outer atomic surface using ion mixtures

Ionic liquid–vacuum outer atomic surfaces can be created that are remarkably different from the bulk composition.

Directly probing the effect of the solvent on a catalyst electronic environment using X-ray photoelectron spectroscopy

The anion of an ionic liquid can significantly influence the electronic environment of a metal centre, and thus impact upon reaction performance in a model Suzuki cross coupling reaction.

Surface composition/organization of ionic liquids with Au nanoparticles revealed by high-sensitivity low-energy ion scattering

High-sensitivity low-energy ion scattering (HS-LEIS) analysis was used to elucidate the outermost layer of both functionalized and non-functionalized imidazolium ionic liquids (ILs). The IL outermost layer is composed of all atoms of both cations and anions. The HS-LEIS analyses also allow for quantitative measurement of the thickness of IL overlayers on Au nanoparticles prepared by sputter deposition, which was shown to be a monolayer of ions, as predicted by density functional theory calculations.

Toward the microscopic identification of anions and cations at the ionic liquid|Ag(111) interface: a combined experimental and theoretical investigation

The interaction between an adsorbed 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [BMP][TFSA], ionic liquid (IL) layer and a Ag(111) substrate, under ultrahigh-vacuum conditions, was investigated in a combined experimental and theoretical approach, by high-resolution scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and dispersion-corrected density functional theory calculations (DFT-D). Most importantly, we succeeded in unambiguously identifying cations and anions in the adlayer by comparing experimental images with submolecular resolution and simulated STM images based on DFT calculations, and these findings are in perfect agreement with the 1:1 ratio of anions and cations adsorbed on the metal derived from XPS measurements. Different adlayer phases include a mobile 2D liquid phase at room temperature and two 2D solid phases at around 100 K, i.e., a 2D glass phase with short-range order and some residual, but very limited mobility and a long-range ordered 2D crystalline phase. The mobility in the different adlayer phases, including melting of the 2D crystalline phase, was evaluated by dynamic STM imaging. The DFT-D calculations show that the interaction with the substrate is composed of mainly van der Waals and weak electrostatic (dipole-induced dipole) interactions and that upon adsorption most of the charge remains at the IL, leading to attractive electrostatic interactions between the adsorbed species.

Mixtures of ionic liquids

Simple ionic liquids have long been held to be designer solvents, based upon the ability to independently vary their cations and anions. The formation of mixtures of ionic liquids increases this synthetic flexibility. We review the available literature of these ionic liquid mixtures to identify how their properties change and the possibility for their application.

Preparation and characterization of ultrathin [Ru(CO)3Cl2]2 and [BMIM][Tf2N] films on Al2O3/NiAl(110) under UHV conditions

Towards a better understanding of the interface chemistry of ionic liquid (IL) thin film catalytic systems we have applied a rigorous surface science model approach. For the first time, a model homogeneous catalyst has been prepared under ultrahigh vacuum conditions. The catalyst, di-μ-chlorobis(chlorotricarbonylruthenium) [Ru(CO)(3)Cl(2)](2), and the solvent, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N], have been deposited by physical vapor deposition onto an alumina model support [Al(2)O(3)/NiAl(110)]. First, the interaction between thin films of [Ru(CO)(3)Cl(2)](2) and the support is investigated. Then, the ruthenium complex is co-deposited with the IL and the influence of the solvent on the catalyst is discussed. D(2)O, which is a model reactant, is further added. Growth, surface interactions, and mutual interactions in the thin films are studied with IRAS in combination with density functional (DFT) calculations. At 105 K, molecular adsorption of [Ru(CO)(3)Cl(2)](2) is observed on Al(2)O(3)/NiAl(110). The IRAS spectra of the binary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] and ternary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] + D(2)O show every characteristic band of the individual components. Above 223 K, partial decomposition of the ruthenium complex leads to species of molecular nature attributed to Ru(CO) and Ru(CO)(2) surface species. Formation of metallic ruthenium clusters occurs above 300 K and the model catalyst decomposes further at higher temperatures. Neither the presence of the IL nor of D(2)O prevents this partial decomposition of [Ru(CO)(3)Cl(2)](2) on alumina.

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.

X-ray photoelectron spectroscopy of ferrocenyl- and ferrocenium-based ionic liquids

X-ray photoelectron spectroscopy (XPS) is used to study a series of five 1-(ferrocenylmethyl)-3-methylimidazolium- and 1-(ferroceniummethyl)-3-methylimidazolium-based salts. All samples emit good photoelectron fluxes with sharp, well-resolved photoelectron peaks. Due to the low volatility of imidazolium-salts at ambient temperature, no modification of the XP spectrometer was required. Two of the salts exhibit supercooling behaviour, allowing XPS to be recorded at room temperature on liquid samples without the need for charge neutralisation. The photoelectron peaks can be assigned to the component atoms of the salts, based on previous studies on ferrocene, ferrocenium-compounds and ionic liquids. Oxidation of the ferrocenyl moiety to ferrocenium shiftsthe Fe 2p and cyclopentadienyl C 1s photoelectron peaks to higher binding energy but does not affect the imidazolium and anion peaks. Under charge-neutralisation conditions, in which the sample is flooded with low-energy electrons, the ferrocenium moiety of the salt 1-(ferroceniummethyl)-3-methylimidazolium di(hexafluorophosphate) is partially reduced.

Surface science and model catalysis with ionic liquid-modified materials

Materials making use of thin ionic liquid (IL) films as support-modifying functional layer open up a variety of new possibilities in heterogeneous catalysis, which range from the tailoring of gas-surface interactions to the immobilization of molecularly defined reactive sites. The present report reviews recent progress towards an understanding of "supported ionic liquid phase (SILP)" and "solid catalysts with ionic liquid layer (SCILL)" materials at the microscopic level, using a surface science and model catalysis type of approach. Thin film IL systems can be prepared not only ex-situ, but also in-situ under ultrahigh vacuum (UHV) conditions using atomically well-defined surfaces as substrates, for example by physical vapor deposition (PVD). Due to their low vapor pressure, these systems can be studied in UHV using the full spectrum of surface science techniques. We discuss general strategies and considerations of this approach and exemplify the information available from complementary methods, specifically photoelectron spectroscopy and surface vibrational spectroscopy.