Filling Helical Nanotubes with C60

Supramolecular complexation of C60 with branched polyethylene

Fullerene C60 is a ubiquitous material for application in organic electronics and nanotechnology, due to its desirable optoelectronic properties including good molecular orbital alignment with electron-rich donor materials, as well as high and isotropic charge carrier mobility. However, C60 possesses two limitations that hinder its integration into large-scale devices: (1) poor solubility in common organic solvents leading to expensive device processing, and (2) poor optical absorbance in the visible portion of the spectrum. Covalent functionalization has long been the standard for introducing structural tunability into molecular design, but non-covalent interactions have emerged as an alternative strategy to tailor C60-based materials, offering a versatile and tuneable alternative to novel functional materials and applications. In this work, we report a straightforward non-covalent functionalization of C60 with a branched polyethylene (BPE), which occurs spontaneously in dilute chloroform solution under ambient conditions. A detailed characterization strategy, based on UV-vis spectroscopy and size-exclusion chromatography was performed to verify and investigate the structure of the C60+BPE complex. Among others, our work reveals that the supramolecular complex has an order of magnitude higher molecular weight than its C60 and BPE constituents and points towards oxidation as the driving force behind complexation. The C60+BPE complex also possesses significantly broadened optical absorbance compared to unfunctionalized C60, extending further into the visible portion of the spectrum. This non-covalent approach presents an inexpensive route to address the shortcomings of C60 for electronic applications, situating the C60+BPE complex as a promising candidate for further investigation in organic electronic devices.

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.

Supramolecular Ensembles Formed via Calix[5]arene-Fullerene Host-Guest Interactions

This minireview introduces the research directions for the synthesis of supramolecular fullerene polymers. First, the discovery of host-guest complexes of pristine fullerenes is briefed. We focus on progress in supramolecular fullerene polymers directed by the use of calix[5]arene-fullerene interactions, which comprise linear, networked, helical arrays of fullerenes in supramolecular ensembles. The unique self-sorting behavior of right-handed and left-handed helical supramolecular fullerene arrays is discussed. Thereafter, an extensive investigation of the calix[5]arene-fullerene interaction for control over the chain structures of covalent polymers is introduced.

Chiral Induction in Buckminsterfullerene Using a Metal-Organic Framework

Chiral induction is an emerging topic of interest in various areas of chemistry because of its relationship to the elusive mechanism of spontaneous symmetry breaking in nature. Buckminsterfullerene (C₆₀ ) with the shape of a highly symmetric truncated icosahedron has rarely been referred for chiral induction due to the difficult symmetry breaking. In this work, we demonstrate that a chiral metal-organic framework (MOF) can provide a key field for chiral induction. C₆₀ could be incorporated into the chiral nanochannels of the MOF using an in situ self-assembly strategy. The circular dichroism spectra of the resulting nanocomposites showed an intense chiral signal in the absorption region of C₆₀ . Experimental and theoretical studies showed that this unprecedented chiral induction of C₆₀ was attributed to hybridization of the molecular orbitals through a close association with the pore surface of the MOF. Our method can endow highly symmetric achiral compounds with chirality, paving the new way toward fabrication of novel chiral nanomaterials.

Dynamic Induction of Optical Activity in Triarylmethanols and Their Carbocations

A series of artificial triarylmethanols has been synthesized and studied toward the possibility of exhibiting an induced optical activity. The observed chiroptical response of these compounds resulted from the chiral conformation of a triarylmethyl core. The chirality induction from a permanent chirality element to the liable triarylmethyl core proceeds as a cooperative and cascade process. The OH···O(R) and/or (H)O···H_orthoC hydrogen bond formation along with the C–H···π interactions seem to be the most important factors that control efficiency of the chirality induction. The position of chiral and methoxy electron-donating groups within a trityl skeleton affects the amplitude of observed Cotton effects and stability of the trityl carbocations. In the neutral environment, the most intense Cotton effects are observed for ortho-substituted derivatives, which undergo a rapid decomposition associated with the complete decay of ECD signals upon acidification. From all of the in situ generated stable carbocations, only two exhibit intense Cotton effects in the low energy region at around 450 nm. The formation of carbocations is reversible; after alkalization, the ions return to the original neutral forms. Unlike most triarylmethyl derivatives known so far, in the crystal, the triarylmethanol, para-substituted with the chiral moiety, shows a propensity for a solid-state sorting phenomenon.

Helix-Sense-Selective Encapsulation of Helical Poly(lactic acid)s within a Helical Cavity of Syndiotactic Poly(methyl methacrylate) with Helicity Memory

We report a highly enantio- and helix-sense-selective encapsulation of helical poly(lactic acid)s (PLAs) through a unique "helix-in-helix" superstructure formation within the helical cavity of syndiotactic poly(methyl methacrylate) (st-PMMA) with a one-handed helicity memory, which enables the separation of the enantiomeric helices of the left (M)- and right (P)-handed-PLAs. The M- and P-helical PLAs with different molar masses and a narrow molar mass distribution were prepared by the ring-opening living polymerization of the optically pure l- and d-lactides, respectively, followed by end-capping of the terminal residues of the PLAs with a 4-halobenzoate and then a C₆₀ unit, giving the C₆₀-free and C₆₀-bound M- and P-PLAs. The C₆₀-free and C₆₀-bound M- and P-PLAs formed crystalline inclusion complexes with achiral st-PMMA accompanied by a preferred-handed helix induction in the st-PMMA backbone, thereby producing helix-in-helix superstructures with the same-handedness to each other. The induced helical st-PMMAs were retained after replacement with the achiral C₆₀, indicating the memory of the induced helicity of the st-PMMAs. Both the C₆₀-free and C₆₀-bound helical PLAs were enantio- and helix-sense selectively encapsulated into the helical hollow space of the optically active M- and P-st-PMMAs with the helicity memory prepared using chiral amines. The M- and P-PLAs are preferentially encapsulated within the M- and P-st-PMMA helical cavity with the same-handedness to each other, respectively, independent of the terminal units. The C₆₀-bound PLAs were more efficiently and enantioselectively trapped in the st-PMMA compared to the C₆₀-free PLAs. The enantioselectivities were highly dependent on the molar mass of the C₆₀-bound and C₆₀-free PLAs and significantly increased as the molar mass of the PLAs increased.

Naphthalenediimides with Cyclic Oligochalcogenides in Their Core

Naphthalenediimides (NDIs) are privileged scaffolds par excellence, of use in functional systems from catalysts to ion channels, photosystems, sensors, ordered matter in all forms, tubes, knots, stacks, sheets, vesicles, and colored over the full visible range. Despite this extensively explored chemical space, there is still room to discover core-substituted NDIs with fundamentally new properties: NDIs with cyclic trisulfides (i.e., trisulfanes) in their core absorb at 668 nm, emit at 801 nm, and contract into disulfides (i.e., dithietes) upon irradiation at <475 nm. Intramolecular 1,5-chalcogen bonds account for record redshifts with trisulfides, ring-tension mediated chalcogen-bond-mediated cleavage for blueshifts to 492 nm upon ring contraction. Cyclic oligochalcogenides (COCs) in the NDI core open faster than strained dithiolanes as in asparagusic acid and are much better retained on thiol exchange affinity columns. This makes COC-NDIs attractive not only within the existing multifunctionality, particularly artificial photosystems, but also for thiol-mediated cellular uptake.

Peptide Stapling with Anion-π Catalysts

We report design, synthesis and evaluation of a series of naphthalenediimides (NDIs) that are bridged with short peptides. Reminiscent of peptide stapling technologies, the macrocycles are conveniently accessible by a chromogenic nucleophilic aromatic substitution of two bromides in the NDI core with two thiols from cysteine sidechains. The dimension of core-bridged NDIs matches that of one turn of an α helix. NDI-stapled peptides exist as two, often separable atropisomers. Introduction of tertiary amine bases in amino-acid sidechains above the π-acidic NDI surface affords operational anion-π catalysts. According to an enolate chemistry benchmark reaction, anion-π catalysis next to peptides occurs with record chemoselectivity but weak enantioselectivity. Catalytic activity drops with increasing distance of the amine base to the NDI surface, looser homocysteine bridges, mismatched, shortened and elongated α-helix turns, and acyclic peptide controls. Elongation of isolated turns into short α helices significantly increases activity. This increase is consistent with remote control of anion-π catalysis from the α-helix macrodipole.

Pyrroloindole-Based Dynamic Combinatorial Chemistry

We report a new class of building blocks for Dynamic Combinatorial Chemistry (DCC) based on the pyrroloindole scaffold. The attachment of l-cysteine on the α, α′ positions of the core makes the molecule suitable for disulfide exchange in aqueous dynamic combinatorial libraries (DCLs). The synthesis of the core follows a modified version of the Knoevenagel–Hemetsberger approach. The new building block (l-PI) is fluorescent (Φ = 48%) and relatively stable towards thermal and photodegradation. The chirality of the cysteine is transferred to the electron-rich pyrroloindole core. Homo- and heterochiral DCLs of l-PI with electron-deficient l- and d-naphthalenediimide (NDI) lead to similar library distributions regardless of the enantiomer used. When no salt is present, the major component is a dimer, while dimers and tetramers are obtained at increased ionic strength.

Impact of NDI-Core Substitution on the pH-Responsive Nature of Peptide-Tethered Luminescent Supramolecular Polymers

The pH-responsive nature of two self-assembled NDI-peptide amphiphile conjugates is reported. The diethoxy substituted NDI showed a pH-dependent assembly behaviour, as expected. In contrast, the isopropylamino- and ethoxy-substituted NDI based supramolecular polymer was stable at acidic and basic aqueous conditions. This finding highlights how subtle changes in the molecular design of π-stacked chromophore-peptide conjugates have a drastic impact on their equilibrium structure and ultimately functional properties.

Protein-directed crystalline 2D fullerene assemblies

Water soluble 2D crystalline monolayers of fullerenes grow on planar assemblies of engineered consensus tetratricopeptide repeat proteins. Designed fullerene-coordinating tyrosine clamps on the protein introduce specific fullerene binding sites, which facilitate fullerene nucleation. Through reciprocal interactions between the components, the hybrid material assembles into two-dimensional 2 nm thick structures with crystalline order, that conduct photo-generated charges. Thus, the protein-fullerene hybrid material is a demonstration of the developments toward functional materials with protein-based precision control of functional elements.

Supramolecular super-helix formation via self-assembly of naphthalene diimide functionalised with bile acid derivatives

The design of chiral chromophores that lead to self-assembly of higher order helical structures is a powerful tool to understand the hierarchical helical structures of molecules of nature. In this work, we present a self-assembled helical super-structure produced via facial stacking of a bile acid bolaamphiphile derivative with a naphthalene diimide core (NDI-DCA), driven by solvophobic effects in THF–H₂O solvent mixtures. The chirality of the helical microstructure is directed by the multiple chiral centres in the precursor molecule. The chirality of the hierarchical assemblies was observed using circular dichroism (CD), Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements. We propose that the NDI-DCA super-structures are formed via similar interactions and mechanisms to those observed in biological molecules such as proteins and DNA.

Carbon Dots-Stimulated Amplification of Aggregation-Induced Emission of Size-Tunable Organic Nanoparticles

Carbon dots (CDs)-induced microstructural modulation and amplification of emission intensity of self-aggregated fluorescent organic nanoparticles (FONPs) is a challenging task since CD is a well-known fluorescence quencher. In the present study, we have designed l-tyrosine-tagged hydrophobically (C-10) tailored naphthalene diimide derivative (NDI-i), which formed FONPs in tetrahydrofuran (THF)-water binary solvent mixture. NDI-i exhibited aggregation-induced emission (AIE) at 580 nm (orange) up to f_w = 70 vol % of water in THF via excimer formation in combination with intramolecular charge transfer (ICT) upon excitation at 350 nm. Beyond f_w = 70 vol %, the emission intensity gradually reduced up to f_w = 99 vol % due to poor water dispersibility of NDI-i FONPs. Doping of hydrophobically (C-2 to C-11 alkyl chain) surface-functionalized CDs (CD-i-iii) within self-aggregates of NDI-i FONPs at f_w = 99 vol % resulted in the modulation of both morphology and emission intensity of resulting self-assembled nanoconjugate. In the presence of C-2 alkyl chain tethered CD, the emission intensity of FONP-CD nanohybrid got quenched compared to that of native NDI-i FONPs. The emission intensity of NDI-i FONPs markedly enhanced by 3.6- to 5.0-fold upon inclusion of C-6 and C-11 alkyl chain containing CDs, respectively. Increasing the alkyl chain length on CD surface facilitated the interchain hydrophobic interaction between the organic nanoparticles and surface-functionalized CDs to form larger CD-doped fused FONPs. The extent of ICT between π-donor and π-acceptor residues became more efficient to exhibit enhanced AIE due to the accumulation of more NDI-i around CD surface through interchain hydrophobic interaction. The C-11 alkyl chain containing CD-integrated FONPs showed the brightest orange emission with superior aqueous stability. These water-dispersible, orange-emitting, cytocompatible NDI-i-CD-iii FONPs were explored for long-term bioimaging of mammalian cells.

New self-assembling peptide nanotubes of large diameter using δ-amino acids

Here we show that 4-aminocyclohexanecarboxylic acid is a rigid stretcher building block for the preparation of cyclic peptides that self-assemble to form peptide nanotubes with large diameter and hydrophobic pores. The hydrophobic properties of the resulting nanotubes provided by the two methylene groups per δ-residue allow the encapsulation of C60 moieties forming a new type of bionanopeapod structure.

Fabrication of diverse nano-architectures through the self-assembly of a naphthalene diimide derivative bearing four carbamates

We found that naphthalene diimide (W2) bearing four carbamates bonds can organise various well-defined self-assembled nanostructures driven by π–π interaction and carbamate H-bonding.

Synthesis and Liquid Crystalline Properties of Unsymmetrically Substituted Naphthalenediimides with a Polar Headgroup: Effect of Amide Hydrogen Bonding and Alkyl Chain Length

A series of new unsymmetrically substituted naphthalenediimide (NDI) moieties NDI-1 to NDI-6 were synthesized. The structures of these compounds were confirmed by means of FT-IR, 1H NMR, 13C NMR, ESI-mass and HRMS spectroscopic measurements. UV/Vis and fluorescence spectroscopy were employed to investigate the photophysical properties of the prepared compounds in solution and in the solid state. Using the onset of UV/Vis absorption, the optical band gaps were calculated. Cyclic voltammetry measurements were performed to study the electrochemical behavior and to calculate the LUMO energy levels. The thermal properties of NDI derivatives were studied by differential scanning calorimetry. The mesomorphic birefringent behavior of the NDI derivatives was investigated with polarizing optical microscopy. Among all of the studied NDI derivatives, only NDI-1, NDI-2, and NDI-3 showed liquid crystalline texture, owing to the presence of an amide linkage for H-bonding along with aromatic moieties for π-π-stacking.

The templation effect as a driving force for the self-assembly of hydrogen-bonded peptidic capsules in competitive media

Peptide-based cavitands (resorcin[4]arenes substituted with histidine and glutamine hydrazides) exist as monomeric species in polar solvents (DMSO and methanol). Upon complexation of fullerenes, the cavitands wrap around the hydrophobic guests forming dimeric capsular shells (as evidenced by DOSY). The self-assembly of the cavitands is based on the formation of beta-sheet-like binding motifs around the hydrophobic core. In a polar environment, these hydrogen bonded structures are kinetically stable and highly ordered as manifested by a 100-fold increase of intensity of circular dichroism bands, as well as a separate set of signals and substantial differences in chemical shifts in NMR spectra. This behavior resembles a protein folding process at the molten globule stage with non-specific hydrophobic interactions creating a protective and favourable local environment for the formation of secondary structures of proteins.

Fluorescent Supramolecular Polymeric Materials

Fluorescent supramolecular polymeric materials are rising stars in the field of fluorescent materials not only because of the inherent optoelectronic properties originating from their chromophores, but also due to the fascinating stimuli-responsiveness and reversibility coming from their noncovalent connections. Especially, these noncovalent connections influence the fluorescence properties of the chromophores because their state of aggregation and energy transfer can be regulated by the assembly-disassembly process. Considering these unique properties, fluorescent supramolecular polymeric materials have facilitated the evolution of new materials useful for applications in fluorescent sensors, probes, as imaging agents in biological systems, light-emitting diodes, and organic electronic devices. In this Review, fluorescent supramolecular polymeric materials are classified depending on the types of main driving forces for supramolecular polymerization, including multiple hydrogen bonding, electrostatic interactions, π-π stacking interactions, metal-coordination, van der Waals interactions and host-guest interactions. Through the summary of the studies about fluorescent supramolecular polymeric materials, the status quo of this research field is assessed. Based on existing challenges, directions for the future development of this field are furnished.

"Helix-in-Helix" Superstructure Formation through Encapsulation of Fullerene-Bound Helical Peptides within a Helical Poly(methyl methacrylate) Cavity

A one-handed 310 -helical hexapeptide is efficiently encapsulated within the helical cavity of st-PMMA when a fullerene (C60 ) derivative is introduced at the C-terminal end of the peptide. The encapsulation is accompanied by induction of a preferred-handed helical conformation in the st-PMMA backbone with the same-handedness as that of the hexapeptide to form a crystalline st-PMMA/peptide-C60 inclusion complex with a unique optically active helix-in-helix structure. Although the st-PMMA is unable to encapsulate the 310 -helical peptide without the terminal C60 unit, the helical hollow space of the st-PMMA is almost filled by the C60 -bound peptides. This result suggests that the C60 moiety can serve as a versatile molecular carrier of specific molecules and polymers in the helical cavity of the st-PMMA for the formation of an inclusion complex, thus producing unique supramolecular soft materials that cannot be prepared by other methods.

Supramolecular Helical Systems: Helical Assemblies of Small Molecules, Foldamers, and Polymers with Chiral Amplification and Their Functions

In this review, we describe the recent advances in supramolecular helical assemblies formed from chiral and achiral small molecules, oligomers (foldamers), and helical and nonhelical polymers from the viewpoints of their formations with unique chiral phenomena, such as amplification of chirality during the dynamic helically assembled processes, properties, and specific functionalities, some of which have not been observed in or achieved by biological systems. In addition, a brief historical overview of the helical assemblies of small molecules and remarkable progress in the synthesis of single-stranded and multistranded helical foldamers and polymers, their properties, structures, and functions, mainly since 2009, will also be described.

Molecular Architectonics of Naphthalenediimides for Efficient Structure-Property Correlation

We present a bioinspired design strategy to effectively tailor the assembly of naphthalenediimides (NDIs) into a wide variety of architectures by functionalizing with amino acid derivatives. This bioinspired process of custom designing and engineering molecular assemblies is termed "bioinspired architectonics". By employing minute structural mutations in the form of α-substituents of amino acids, we successfully engineered molecular assembly of NDIs into zero-dimensional (0D, spheres), one-dimensional (1D, fibers), and two-dimensional (2D, sheets) architectures. The 2D sheets of phenylalanine methylester appended NDI 1 showed remarkable bulk electron mobility of up to 1 cm(2) V(-1)s(-1). With the aid of photophysical, diffraction, and microscopy techniques we rationalize the effect of molecular structure with their ordering and electronic properties in an effort to find structure-property correlations via a bioinspired modular approach.

Supramolecular pentapeptide-based fullerene nanofibers: effect of molecular chirality

The supramolecular organization of new fullerene derivatives endowed with peptides as biomolecular templates affords ordered nanofibers of several micrometres length based on hydrogen bonds and π-π interactions.

Cyclic aromatic imides as a potential class of molecules for supramolecular interactions

Prospects of stacking interactions of imides beneficial to generation of new soft materials are projected by analysing examples of primary building blocks that provide a basis for understanding at the molecular level.

Phosphorus-containing chiral molecule for fullerene recognition based on concave/convex interaction

A C3-symmetric chiral concave molecule having a phosphorus atom at the center was synthesized, and its enantiomers were resolved. The chiral concave shape and absolute structure of the concave molecules were revealed by X-ray analysis. The concave molecule exhibited intense chiroptical properties with a large anisotropy, which was derived from molecular orbitals delocalized to the side chains. In the co-crystal with pristine C60, four of the enantiopure concave molecules perfectly wrapped the surface of C60. MALDI-TOF mass, NMR, and circular dichromism spectra also supported the concave/convex interaction between the concave molecule and fullerene. These results suggest that the phosphorus-containing molecule with a concave shape plays an important role as a chiral host molecule for C60.

Crystal structure of N,N'-bis-[(pyridin-4-yl)meth-yl]naphthalene di-imide

In the centrosymmetric title compound, C26H16N4O4 {systematic name: 6,13-bis-[(pyridin-4-yl)meth-yl]-6,13-di-aza-tetra-cyclo-[6.6.2.0(4,16)0(11,15)]hexa-deca-1,3,8,10,15-pantaene-5,7,12,14-tetrone}, the central ring system is essentially planar [maximum deviation = 0.0234 (8) Å] and approximately perpendicular to the terminal pyridine ring [dihedral angle = 84.38 (3)°]. The mol-ecules displays a trans conformation with the (pyridin-4-yl)methyl groups on both sides of the central naphthalene di-imide plane. In the crystal, mol-ecules are linked by π-π stacking between parallel pyridine rings [centroid-centroid distances = 3.7014 (8) and 3.8553 (8) Å] and weak C-H⋯O hydrogen bonds, forming a three-dimensional supra-molecular architecture.

Strategies for the synthesis of functional naphthalene diimides

Naphthalene diimides, which have for a long time been in the shadow of their higher homologues the perylene diimides, currently belong to the most investigated classes of organic compounds. This is primarily due to the initial synthetic studies on core functionalization that were carried out at the beginning of the last decade, which facilitated diverse structural modifications of the naphthalene scaffold. Compounds with greatly modified optical and electronic properties that can be easily and effectively modulated by appropriate functionalization were made accessible through relatively little synthetic effort. This resulted in diverse interesting applications. The electron-deficient character of these compounds makes them highly valuable, particularly in the field of organic electronics as air-stable n-type semiconductors, while absorption bands over the whole visible spectral range through the introduction of core substituents enabled interesting photosystems and photovoltaic applications. This Review provides an overview on different approaches towards core functionalization as well as on synthetic strategies for the core expansion of naphthalene diimides that have been developed mainly in the last five years.

Direct core functionalisation of naphthalenediimides by iridium catalysed C–H borylation

We report the first boron-substituted naphthalenediimides (NDIs), prepared by iridium catalysed C–H activation. Both mono- and diborylated products are available, which have been further elaborated by Suzuki–Miyaura coupling.

Between peptides and bile acids: self-assembly of phenylalanine substituted cholic acids

Biocompatible molecules that undergo self-assembly are of high importance in biological and medical applications of nanoscience. Peptides and bile acids are among the most investigated due to their ability to self-organize into many different, often stimuli-sensitive, supramolecular structures. With the aim of preparing molecules mixing the aggregation properties of bile acid and amino acid-based molecules, we report on the synthesis and self-association behavior of two diastereomers obtained by substituting a hydroxyl group of cholic acid with a l-phenylalanine residue. The obtained molecules are amphoteric, and we demonstrate that they show a pH-dependent self-assembly. Both molecules aggregate in globular micelles at high pH, whereas they form tubular superstructures under acid conditions. Unusual narrow nanotubes with outer and inner cross-section diameters of about 6 and 3 nm are formed by the derivatives. The diasteroisomer with α orientation of the substituent forms in addition a wider tubule (17 nm cross-section diameter). The ability to pack in supramolecular tubules is explained in terms of a wedge-shaped bola-form structure of the derivatives. Parallel or antiparallel face-to-face dimers are hypothesized as fundamental building blocks for the formation of the narrow and wide nanotubes, respectively.