Distinguishing Anhydrous and Hydrous Forms of an Active Pharmaceutical Ingredient in a Tablet Formulation Using Solid-State NMR Spectroscopy

Mixed Metal Amide-Hydride Solid Solutions for Potential Energy Storage Applications

Mixed solid solutions have played an important role in improving the kinetics and performance of hydrogen storage materials, as reported for the Li-Mg-N-H, K-Mg-N-H, and Rb-Mg-N-H systems. Besides, the formation of a homogeneous solid solution, mostly due to partial ionic substitution, is known to be an effective approach to improve the ionic conductivity of a material, which is an important property in electrochemical applications. We have reported a series of solid solutions based on mixed amide-hydride materials of the Group 1 elements, e.g., K(NH2)xH1-x, Rb(NH2)xH1-x, and Cs(NH2)xH1-x, via the exchange of NH2-/H- anions with the change of the lattice cell of the solid solution. Extending the research in this direction, we study the M-N-H solid solution in the MNH2-MH systems (M = K, Rb, Cs, and their combinations), i.e., KNH2-RbH, RbNH2-KH, RbNH2-CsH, and CsNH2-RbH via ex situ/in situ XRD, IR, and 1H 2D solid-state NMR. The results obtained confirm the formation of mixed metal amide-hydride solid solutions associated with an exchange between both anionic (NH2- and H-) and cationic species (K+, Rb+, and Cs+). With this study, we aim to create an accessible library of M-N-H solid solutions for further studies as additives for hydrogen storage materials or ionic conductors.

Identification and quantification techniques of polymorphic forms - A review

In the pharmaceutical industry, the unexpected appearance of crystalline forms could impact the therapeutic efficacy of an Active Pharmaceutical Ingredient (API). For quality control, a thorough qualitative and quantitative monitoring of pharmaceutical solid forms is essential to ensure the detection and the quantification of crystalline forms, wither different or with the same chemical composition (polymorphs) at a low detection level. The purpose of this paper was to review and highlight the importance of choosing adequate solid-state techniques for detection and quantification APIs that present polymorphism - based on limits of detection (LOD) and quantification (LOQ), pharmacopeias specifications, international guidelines and studies reported in the literature. To this study, the powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), Infrared and Raman spectroscopies and solid-state nuclear magnetic resonance (NMR) were the solid-state techniques analyzed. Additionally, the Argentine, Brazilian, British, European, International, Japanese, Mexican and the United States of America pharmacopeias were reviewed. Based on the analysis performed, the advantages and disadvantages of these techniques, as well as the LOD and LOQ values of APIs were reported. In comparison to these solid-state techniques, reference material used for identification analyses should be previously identified with the corresponding polymorph. Without this previous procedure, the patterns, the spectra, and DSC curves of the reference material can only be used to confirm the mixture of solid forms, not being able to specify which polymorphs are contained in the sample. A major advantage of PXRD is the use of the calculated diffraction patterns obtained from the Crystallographic Information Frameworks (CIFs) files which could be used as a reference pattern without any other information, assistance technique, or physical standards. Regarding the quantification aspect, different pharmacopeias suggest various methods such as the PXRD combining with Rietveld method, which can be used to obtain lower LOD values for minority phases in the mixture of different substances without the need for a calibration curve. Raman spectroscopy can detect polymorphs in small particles and solid-state NMR spectroscopy is a powerful technique for quantification not only crystalline but also crystalline-amorphous mixtures. Finally, this review intends to be a useful tool to control, with efficiency and accuracy, the polymorphism of APIs in pharmaceutical compounds.

Insights into the Structure of Sucralfate by Advanced Solid- and Liquid-State NMR

Sucralfate, which is a sucrose octasulfate aluminum complex, is an active pharmaceutical ingredient (API) falling in the category of cytoprotective agents which are very effective for gastric and duodenal ulcers. On interaction with stomach acid, it ionizes into aluminum and sucrose octasulfate ions to form a protective layer over the ulcerated region inhibiting further attack from acid. The mechanism of action of sucralfate in the context of its structure is not well understood. Considering that at least two forms of this API are available in the market, there are no reports on the various forms of sucralfate and differences in their pharmacological action. We characterized the two forms of sucralfate using multinuclear, multidimensional solid-state NMR, and the results show significant structural differences between them arising from variation in the aluminum environment and the level of hydration. The impact of structural differences on pharmacological action was examined by studying acid-induced Al release by 27Al liquid-state NMR. The sucralfate, European pharmaceutical standard, Form I, undergoes faster disruption in acid compared to Form II. The difference is explained on the basis of structural differences in the two forms which gives significant insights into the action of sucralfate in relation to its structure.

Exploiting solid-state dynamic nuclear polarization NMR spectroscopy to establish the spatial distribution of polymorphic phases in a solid material

Solid-state DNP NMR can enhance the ability to detect minor amounts of solid phases within heterogenous materials. Here we demonstrate that NMR contrast based on the transport of DNP-enhanced polarization can be exploited in the challenging case of early detection of a small amount of a minor polymorphic phase within a major polymorph, and we show that this approach can yield quantitative information on the spatial distribution of the two polymorphs. We focus on the detection of a minor amount (<4%) of polymorph III of m-aminobenzoic acid within a powder sample of polymorph I at natural isotopic abundance. Based on proposed models of the spatial distribution of the two polymorphs, simulations of 1H spin diffusion allow NMR data to be calculated for each model as a function of particle size and the relative amounts of the polymorphs. A comparison between simulated and experimental NMR data allows the model(s) best representing the spatial distribution of the polymorphs in the system to be established.

Ultrafast Magic Angle Spinning Solid-State NMR Spectroscopy: Advances in Methodology and Applications

Solid-state NMR spectroscopy is one of the most commonly used techniques to study the atomic-resolution structure and dynamics of various chemical, biological, material, and pharmaceutical systems spanning multiple forms, including crystalline, liquid crystalline, fibrous, and amorphous states. Despite the unique advantages of solid-state NMR spectroscopy, its poor spectral resolution and sensitivity have severely limited the scope of this technique. Fortunately, the recent developments in probe technology that mechanically rotate the sample fast (100 kHz and above) to obtain "solution-like" NMR spectra of solids with higher resolution and sensitivity have opened numerous avenues for the development of novel NMR techniques and their applications to study a plethora of solids including globular and membrane-associated proteins, self-assembled protein aggregates such as amyloid fibers, RNA, viral assemblies, polymorphic pharmaceuticals, metal-organic framework, bone materials, and inorganic materials. While the ultrafast-MAS continues to be developed, the minute sample quantity and radio frequency requirements, shorter recycle delays enabling fast data acquisition, the feasibility of employing proton detection, enhancement in proton spectral resolution and polarization transfer efficiency, and high sensitivity per unit sample are some of the remarkable benefits of the ultrafast-MAS technology as demonstrated by the reported studies in the literature. Although the very low sample volume and very high RF power could be limitations for some of the systems, the advantages have spurred solid-state NMR investigation into increasingly complex biological and material systems. As ultrafast-MAS NMR techniques are increasingly used in multidisciplinary research areas, further development of instrumentation, probes, and advanced methods are pursued in parallel to overcome the limitations and challenges for widespread applications. This review article is focused on providing timely comprehensive coverage of the major developments on instrumentation, theory, techniques, applications, limitations, and future scope of ultrafast-MAS technology.

Selective detection of active pharmaceutical ingredients in tablet formulations using solid-state NMR spectroscopy

Atomic-level characterization of active pharmaceutical ingredients (API) is crucial in pharmaceutical industry because APIs play an important role in physicochemical properties of drug formulations. However, the analysis of targeted APIs in intact tablet formulations is less straightforward due to the coexistence of excipients as major components and different APIs at dilute concentrations (often below 10 ​wt% loading). Although solid-state (ss) NMR spectroscopy is widely used to investigate short-range order, polymorphism, and pseudo-polymorphism in neat pharmaceutical compounds, the analysis of complex drug formulations is often limited by overlapped signals that originate from structurally different APIs and excipients. In particular, such examples are frequently encountered in the analysis of ¹H ssNMR spectra of pharmaceutical formulations. While the high-resolution in ¹H ssNMR spectra can be attained by, for example, high magnetic fields accompanied by fast magic-angle spinning (MAS) approaches, the spectral complexity associated with the mixtures of compounds hinders the accurate determination of chemical shifts and through-space proximities. Here we propose a fast MAS (70 ​kHz) NMR experiment for the selective detection of ¹H signals associated with an API from a severely overlapped NMR spectrum of a tablet formulation. Spectral simplification is achieved by combining (i) symmetry-based dipolar recoupling (SR4₁²) rotational-echo saturation-pulse double-resonance (RESPDOR) with phase-modulate (PM) saturation pulses, (ii) radio frequency-driven recoupling (RFDR), and (iii) double-quantum excitation using Back-to-Back (BaBa) pulse sequence elements. First, ¹H sites in close proximities to ¹⁴N nuclei of an API are excited using a PM-S-RESPDOR sequence, and simultaneously, the other unwanted ¹H signals of excipients are suppressed. Then, ¹H magnetization transfer to adjacent ¹H sites in the API is achieved by spin diffusion process using a RFDR sequence, which polarizes to ¹H sites within the crystalline API regions of the drug formulation. Next, a PM-S-RESPDOR-RFDR sequence is combined with a Back-to-Back (BaBa) sequence to elucidate local-structures and ¹H-¹H proximities of the API in a dosage form. The PM-S-RESPDOR-RFDR-BaBa experiment is employed in one- (1D) and two-dimensional (2D) versions to selectively detect the ¹H ssNMR spectrum of l-cysteine (10.6 ​wt% or 0.11 ​mg) in a commercial formulation, and compared with the spectra of neat l-cysteine recorded using a standard BaBa experiment. The 2D ¹H double-quantum-single-quantum (DQ-SQ) spectrum of the API (l-cysteine)-detected pharmaceutical tablet is in good agreement with the 2D ¹H DQ-SQ spectrum obtained from the pure API molecule. Furthermore, the sensitivity and robustness of the experiment is examined by selectively detecting ¹H{¹⁴N} signals in an amino acid salt, l-histidine^.H₂O^.HCl.

DNP-enhanced solid-state NMR spectroscopy of active pharmaceutical ingredients

Solid-state NMR spectroscopy has become a valuable tool for the characterization of both pure and formulated active pharmaceutical ingredients (APIs). However, NMR generally suffers from poor sensitivity that often restricts NMR experiments to nuclei with favorable properties, concentrated samples, and acquisition of one-dimensional (1D) NMR spectra. Here, we review how dynamic nuclear polarization (DNP) can be applied to routinely enhance the sensitivity of solid-state NMR experiments by one to two orders of magnitude for both pure and formulated APIs. Sample preparation protocols for relayed DNP experiments and experiments on directly doped APIs are detailed. Numerical spin diffusion models illustrate the dependence of relayed DNP enhancements on the relaxation properties and particle size of the solids and can be used for particle size determination when the other factors are known. We then describe the advanced solid-state NMR experiments that have been enabled by DNP and how they provide unique insight into the molecular and macroscopic structure of APIs. For example, with large sensitivity gains provided by DNP, natural isotopic abundance, ¹³ C-¹³ C double-quantum single-quantum homonuclear correlation NMR spectra of pure APIs can be routinely acquired. DNP also enables solid-state NMR experiments with unreceptive quadrupolar nuclei such as ² H, ¹⁴ N, and ³⁵ Cl that are commonly found in APIs. Applications of DNP-enhanced solid-state NMR spectroscopy for the molecular level characterization of low API load formulations such as commercial tablets and amorphous solid dispersions are described. Future perspectives for DNP-enhanced solid-state NMR experiments on APIs are briefly discussed.

In Situ Characterization of Pharmaceutical Formulations by Dynamic Nuclear Polarization Enhanced MAS NMR

A principal advantage of magic angle spinning (MAS) NMR spectroscopy lies in its ability to determine molecular structure in a noninvasive and quantitative manner. Accordingly, MAS should be widely applicable to studies of the structure of active pharmaceutical ingredients (API) and formulations. However, the low sensitivity encountered in spectroscopy of natural abundance APIs present at low concentration has limited the success of MAS experiments. Dynamic nuclear polarization (DNP) enhances NMR sensitivity and can be used to circumvent this problem provided that suitable paramagnetic polarizing agent can be incorporated into the system without altering the integrity of solid dosages. Here, we demonstrate that DNP polarizing agents can be added in situ during the preparation of amorphous solid dispersions (ASDs) via spray drying and hot-melt extrusion so that ASDs can be examined during drug development. Specifically, the dependence of DNP enhancement on sample composition, radical concentration, relaxation properties of the API and excipients, types of polarizing agents and proton density, has been thoroughly investigated. Optimal enhancement values are obtained from ASDs containing 1% w/w radical concentration. Both polarizing agents TOTAPOL and AMUPol provided reasonable enhancements. Partial deuteration of the excipient produced 3× higher enhancement values. With these parameters, an ASD containing posaconazole and vinyl acetate yields a 32-fold enhancement which presumably results in a reduction of NMR measurement time by ∼1000. This boost in signal intensity enables the full assignment of the natural abundance pharmaceutical formulation through multidimensional correlation experiments.

Five decades of homonuclear dipolar decoupling in solid-state NMR: Status and outlook

It has been slightly more than fifty years since the first homonuclear spin decoupling scheme, Lee-Goldburg decoupling, was proposed for removing homonuclear dipolar interactions in solid-state nuclear magnetic resonance. A family of such schemes has made observation of high-resolution NMR spectra of abundant spins possible in various applications in solid state. This review outlines the strategies used in this field and the future prospects of homonuclear spin decoupling in solid-state NMR.

35Cl solid-state NMR spectroscopy of HCl pharmaceuticals and their polymorphs in bulk and dosage forms

Herein, we demonstrate the use of 35Cl SSNMR for the structural fingerprinting of HCl salts of pharmaceuticals in both bulk and dosage forms.

Natural abundance 14N and 15N solid-state NMR of pharmaceuticals and their polymorphs

¹⁴N and ¹⁵N solid-state NMR at natural abundance are used in tandem for the investigation of pharmaceuticals and their polymorphs.

The use of a selective saturation pulse to suppress t1 noise in two-dimensional (1)H fast magic angle spinning solid-state NMR spectroscopy

A selective saturation pulse at fast magic angle spinning (MAS) frequencies (60+kHz) suppresses t1 noise in the indirect dimension of two-dimensional (1)H MAS NMR spectra. The method is applied to a synthetic nucleoside with an intense methyl (1)H signal due to triisopropylsilyl (TIPS) protecting groups. Enhanced performance in terms of suppressing the methyl signal while minimising the loss of signal intensity of nearby resonances of interest relies on reducing spin diffusion--this is quantified by comparing two-dimensional (1)H NOESY-like spin diffusion spectra recorded at 30-70 kHz MAS. For a saturation pulse centred at the methyl resonance, the effect of changing the nutation frequency at different MAS frequencies as well as the effect of changing the pulse duration is investigated. By applying a pulse of duration 30 ms and nutation frequency 725 Hz at 70 kHz MAS, a good compromise of significant suppression of the methyl resonance combined with the signal intensity of resonances greater than 5 ppm away from the methyl resonance being largely unaffected is achieved. The effectiveness of using a selective saturation pulse is demonstrated for both homonuclear (1)H-(1)H double quantum (DQ)/single quantum (SQ) MAS and (14)N-(1)H heteronuclear multiple quantum coherence (HMQC) two-dimensional solid-state NMR experiments.

Solid-state NMR structure determination from diagonal-compensated, sparsely nonuniform-sampled 4D proton-proton restraints

We report acquisition of diagonal-compensated protein structural restraints from four-dimensional solid-state NMR spectra on extensively deuterated and (1)H back-exchanged proteins. To achieve this, we use homonuclear (1)H-(1)H correlations with diagonal suppression and nonuniform sampling (NUS). Suppression of the diagonal allows the accurate identification of cross-peaks which are otherwise obscured by the strong autocorrelation or whose intensity is biased due to partial overlap with the diagonal. The approach results in unambiguous spectral interpretation and relatively few but reliable restraints for structure calculation. In addition, the diagonal suppression produces a spectrum with low dynamic range for which ultrasparse NUS data sets can be readily reconstructed, allowing straightforward application of NUS with only 2% sampling density with the advantage of more heavily sampling time-domain regions of high signal intensity. The method is demonstrated here for two proteins, α-spectrin SH3 microcrystals and hydrophobin functional amyloids. For the case of SH3, suppression of the diagonal results in facilitated identification of unambiguous restraints and improvement of the quality of the calculated structural ensemble compared to nondiagonal-suppressed 4D spectra. For the only partly assigned hydrophobin rodlets, the structure is yet unknown. Applied to this protein of biological significance with large inhomogeneous broadening, the method allows identification of unambiguous crosspeaks that are otherwise obscured by the diagonal.

Dynamic nuclear polarization enhanced NMR spectroscopy for pharmaceutical formulations

Dynamic nuclear polarization (DNP) enhanced solid-state NMR spectroscopy at 9.4 T is demonstrated for the detailed atomic-level characterization of commercial pharmaceutical formulations. To enable DNP experiments without major modifications of the formulations, the gently ground tablets are impregnated with solutions of biradical polarizing agents. The organic liquid used for impregnation (here 1,1,2,2-tetrachloroethane) is chosen so that the active pharmaceutical ingredient (API) is minimally perturbed. DNP enhancements (ε) of between 40 and 90 at 105 K were obtained for the microparticulate API within four different commercial formulations of the over-the-counter antihistamine drug cetirizine dihydrochloride. The different formulations contain between 4.8 and 8.7 wt % API. DNP enables the rapid acquisition with natural isotopic abundances of one- and two-dimensional (13)C and (15)N solid-state NMR spectra of the formulations while preserving the microstructure of the API particles. Here this allowed immediate identification of the amorphous form of the API in the tablet. API-excipient interactions were observed in high-sensitivity (1)H-(15)N correlation spectra, revealing direct contacts between povidone and the API. The API domain sizes within the formulations were determined by measuring the variation of ε as a function of the polarization time and numerically modeling nuclear spin diffusion. Here we measure an API particle radius of 0.3 μm with a single particle model, while modeling with a Weibull distribution of particle sizes suggests most particles possess radii of around 0.07 μm.

35Cl solid-state NMR of HCl salts of active pharmaceutical ingredients: structural prediction, spectral fingerprinting and polymorph recognition

A series of HCl salts of active pharmaceutical ingredients (APIs) have been characterized via³⁵Cl solid-state NMR (SSNMR) spectroscopy and first-principles plane-wave DFT calculations of ³⁵Cl NMR interaction tensors.

Formation of Organic Molecular Nanocrystals under Rigid Confinement with Analysis by Solid State NMR

Crystallization in rigid confinement is a promising method to obtain organic molecular nanocrystals. However, the crystallization behavior and the related characterization methods are not well studied. Here we present a systematic study of the nucleation of organic molecular nanocrystals in rigid pores. Four different compounds were studied, ibuprofen, fenofibrate, griseofulvin, and indomethacin, which range from simple to complex molecules. Solid-state Nuclear Magnetic Resonance (NMR) was employed to analyse the structure of these compounds inside pores which are difficult to characterize by other analytical methods. We successfully demonstrated the production of nano-crystalline ibuprofen, fenofibrate and griseofulvin in porous silica particles with ~ 40 nm pores. These nanocrystals showed significant enhancement in dissolution rates. These results help advance the fundamental understanding of nucleation under rigid confinement and may lead to potential applications in developing new formulations in the pharmaceutical industry.

Characterization of solid polymer dispersions of active pharmaceutical ingredients by 19F MAS NMR and factor analysis

In this contribution the ability of (19)F MAS NMR spectroscopy to probe structural variability of poorly water-soluble drugs formulated as solid dispersions in polymer matrices is discussed. The application potentiality of the proposed approach is demonstrated on a moderately sized active pharmaceutical ingredient (API, Atorvastatin) exhibiting extensive polymorphism. In this respect, a range of model systems with the API incorporated in the matrix of polvinylpyrrolidone (PVP) was prepared. The extent of mixing of both components was determined by T(1)((1)H) and T(1ρ)((1)H) relaxation experiments, and it was found that the API forms nanosized domains. Subsequently it was found out that the polymer matrix induces two kinds of changes in (19)F MAS NMR spectra. At first, this is a high-frequency shift reaching 2-3 ppm which is independent on molecular structure of the API and which results from the long-range polarization of the electron cloud around (19)F nucleus induced by electrostatic fields of the polymer matrix. At second, this is broadening of the signals and formation of shoulders reflecting changes in molecular arrangement of the API. To avoid misleading in the interpretation of the recorded (19)F MAS NMR spectra, because both the contributions act simultaneously, we applied chemometric approach based on multivariate analysis. It is demonstrated that factor analysis of the recorded spectra can separate both these spectral contributions, and the subtle structural differences in the molecular arrangement of the API in the nanosized domains can be traced. In this way (19)F MAS NMR spectra of both pure APIs and APIs in solid dispersions can be directly compared. The proposed strategy thus provides a powerful tool for the analysis of new formulations of fluorinated pharmaceutical substances in polymer matrices.

Dynamic nuclear polarization NMR spectroscopy of microcrystalline solids

Dynamic nuclear polarization (DNP) solid-state NMR has been applied to powdered microcrystalline solids to obtain sensitivity enhancements on the order of 100. Glucose, sulfathiazole, and paracetamol were impregnated with bis-nitroxide biradical (bis-cyclohexyl-TEMPO-bisketal, bCTbK) solutions of organic solvents. The organic solvents were carefully chosen to be nonsolvents for the compounds, so that DNP-enhanced solid-state NMR spectra of the unaltered solids could be acquired. A theoretical model is presented that illustrates that for externally doped organic solids characterized by long spin-lattice relaxation times (T(1)((1)H) > 200 s), (1)H-(1)H spin diffusion can relay enhanced polarization over micrometer length scales yielding substantial DNP enhancements (ε). ε on the order of 60 are obtained for microcrystalline glucose and sulfathiazole at 9.4 T and with temperatures of ca. 105 K. The large gain in sensitivity enables the rapid acquisition of (13)C-(13)C correlation spectra at natural isotopic abundance. It is anticipated that this will be a general method for enhancing the sensitivity of solid-state NMR experiments of organic solids.

Applications of high-resolution 1H solid-state NMR

This article reviews the large increase in applications of high-resolution (1)H magic-angle spinning (MAS) solid-state NMR, in particular two-dimensional heteronuclear and homonuclear (double-quantum and spin-diffusion NOESY-like exchange) experiments, in the last five years. These applications benefit from faster MAS frequencies (up to 80 kHz), higher magnetic fields (up to 1 GHz) and pulse sequence developments (e.g., homonuclear decoupling sequences applicable under moderate and fast MAS). (1)H solid-state NMR techniques are shown to provide unique structural insight for a diverse range of systems including pharmaceuticals, self-assembled supramolecular structures and silica-based inorganic-organic materials, such as microporous and mesoporous materials and heterogeneous organometallic catalysts, for which single-crystal diffraction structures cannot be obtained. The power of NMR crystallography approaches that combine experiment with first-principles calculations of NMR parameters (notably using the GIPAW approach) are demonstrated, e.g., to yield quantitative insight into hydrogen-bonding and aromatic CH-π interactions, as well as to generate trial three-dimensional packing arrangements. It is shown how temperature-dependent changes in the (1)H chemical shift, linewidth and DQ-filtered signal intensity can be analysed to determine the thermodynamics and kinetics of molecular level processes, such as the making and breaking of hydrogen bonds, with particular application to proton-conducting materials. Other applications to polymers and biopolymers, inorganic compounds and bioinorganic systems, paramagnetic compounds and proteins are presented. The potential of new technological advances such as DNP methods and new microcoil designs is described.

Identifying guanosine self assembly at natural isotopic abundance by high-resolution 1H and 13C solid-state NMR spectroscopy

By means of the (1)H chemical shifts and the proton-proton proximities as identified in (1)H double-quantum (DQ) combined rotation and multiple-pulse spectroscopy (CRAMPS) solid-state NMR correlation spectra, ribbon-like and quartet-like self-assembly can be identified for guanosine derivatives without isotopic labeling for which it was not possible to obtain single crystals suitable for diffraction. Specifically, characteristic spectral fingerprints are observed for dG(C10)(2) and dG(C3)(2) derivatives, for which quartet-like and ribbon-like self-assembly has been unambiguously identified by (15)N refocused INADEQUATE spectra in a previous study of (15)N-labeled derivatives (Pham, T. N.; et al. J. Am. Chem. Soc.2005, 127, 16018). The NH (1)H chemical shift is observed to be higher (13-15 ppm) for ribbon-like self-assembly as compared to 10-11 ppm for a quartet-like arrangement, corresponding to a change from NH···N to NH···O intermolecular hydrogen bonding. The order of the two NH(2)(1)H chemical shifts is also inverted, with the NH(2) proton closest in space to the NH proton having a higher or lower (1)H chemical shift than that of the other NH(2) proton for ribbon-like as opposed to quartet-like self-assembly. For the dG(C3)(2) derivative for which a single-crystal diffraction structure is available, the distinct resonances and DQ peaks are assigned by means of gauge-including projector-augmented wave (GIPAW) chemical shift calculations. In addition, (14)N-(1)H correlation spectra obtained at 850 MHz under fast (60 kHz) magic-angle spinning (MAS) confirm the assignment of the NH and NH(2) chemical shifts for the dG(C3)(2) derivative and allow longer range through-space N···H proximities to be identified, notably to the N7 nitrogens on the opposite hydrogen-bonding face.

Evolution of solid-state NMR in pharmaceutical analysis

The technique of solid-state NMR, as applied to pharmaceutical analysis, has evolved from a sparingly used technique into an integrated, information-rich technique that uses a variety of sophisticated 1D and 2D experiments. In this article, several key developments in the field are reviewed, highlighting the increasing sophistication of the analyses being utilized and the detailed results obtained, in addition to future directions and developments.

Multinuclear solid state NMR investigation of two polymorphic forms of ciprofloxacin-saccharinate

Two polymorphic forms of a novel pharmaceutical compound, ciprofloxacin-saccharinate (CIP-SAC), are analyzed using one dimensional (1D) and two dimensional (2D) (1)H nuclear magnetic resonance (NMR) at fast magic angle spinning (MAS). Additionally (15)N spectroscopy and (1)H-(13)C correlation experiments were performed to complement our conclusions. The 1D (1)H NMR spectra of CIP and complexes reveal valuable information about the ionic bonding between ciprofloxacin and saccharine. Additionally, these spectra allow us to perform a clear characterization of each solid form, giving the number of molecules per unit cell in one of the polymorphs. From 2D (1)H-(1)H spectra obtained through double quantum correlations we can arrive at important conclusions about the hydrogen bonding, conformation, and intra and inter-molecular interactions present in these compounds. Comparing and contrasting the (1)H-(1)H correlation data obtained for both polymorphic forms and taking into account the single crystal structure data existing for the solid form CIP-SAC (II) was possible to extract some conclusions on the polymorph CIP-SAC (I) where no single crystal information is available. (1)H MAS NMR is shown to be an important tool in the field of polymorphism and for the characterization of multicomponent pharmaceutical compounds.

Complete (1)H resonance assignment of beta-maltose from (1)H-(1)H DQ-SQ CRAMPS and (1)H (DQ-DUMBO)-(13)C SQ refocused INEPT 2D solid-state NMR spectra and first principles GIPAW calculations

A disaccharide is a challenging case for high-resolution (1)H solid-state NMR because of the 24 distinct protons (14 aliphatic and 10 OH) having (1)H chemical shifts that all fall within a narrow range of approximately 3 to 7 ppm. High-resolution (1)H (500 MHz) double-quantum (DQ) combined rotation and multiple pulse sequence (CRAMPS) solid-state NMR spectra of beta-maltose monohydrate are presented. (1)H-(1)H DQ-SQ CRAMPS spectra are presented together with (1)H (DQ)-(13)C correlation spectra obtained with a new pulse sequence that correlates a high-resolution (1)H DQ dimension with a (13)C single quantum (SQ) dimension using the refocused INEPT pulse-sequence element to transfer magnetization via one-bond (13)C-(1)H J couplings. Compared to the observation of only a single broad peak in a (1)H DQ spectrum recorded at 30 kHz magic-angle spinning (MAS), the use of DUMBO (1)H homonuclear decoupling in the (1)H DQ CRAMPS experiment allows the resolution of distinct DQ correlation peaks which, in combination with first-principles chemical shift calculations based on the GIPAW (Gauge Including Projector Augmented Waves) plane-wave pseudopotential approach, enables the assignment of the (1)H resonances to the 24 distinct protons. We believe this to be the first experimental solid-state NMR determination of the hydroxyl OH (1)H chemical shifts for a simple sugar. Variable-temperature (1)H-(1)H DQ CRAMPS spectra reveal small increases in the (1)H chemical shifts of the OH resonances upon decreasing the temperature from 348 K to 248 K.

Determining relative proton-proton proximities from the build-up of two-dimensional correlation peaks in 1H double-quantum MAS NMR: insight from multi-spin density-matrix simulations

The build-up of intensity-as a function of the number, n(rcpl), of POST-C7 elements used for the excitation and reconversion of double-quantum (DQ) coherence (DQC)-is analysed for the fifteen distinct DQ correlation peaks that are observed experimentally for the eight separate (1)H resonances in a (1)H (500 MHz) DQ CRAMPS solid-state (12.5 kHz MAS) NMR spectrum of the dipeptide beta-AspAla (S. P. Brown, A. Lesage, B. Elena, and L. Emsley, J. Am. Chem. Soc., 2004, 126, 13230). The simulation in SPINEVOLUTION (M. Veshtort and R. G. Griffin, J. Magn. Reson., 2006, 178, 248) of t(1) ((1)H DQ evolution) FIDs for clusters of eight dipolar-coupled protons gives separate simulated (1)H DQ build-up curves for the CH(2)(a), CH(2)(b), CH(Asp), CH(Ala), NH and OH (1)H single-quantum (SQ) (1)H resonances. An analysis of both the simulated and experimental (1)H DQ build-up leads to the following general observations: (i) considering the build-up of (1)H DQ peaks at a particular SQ frequency, maximum intensity is observed for the DQC corresponding to the shortest H-H distance; (ii) for the maximum intensity (1)H DQ peak at a particular SQ frequency, the recoupling time for the observed maximum intensity depends on the corresponding H-H distance, e.g., maximum intensity for the CH(2)(a)-CH(2)(b) (H-H distance = 1.55 A) and OH-CH(Asp) (H-H distance = 2.49 A) DQ peaks is observed at n(rcpl) = 2 and 3, respectively; (iii) for DQ peaks involving a CH(2) proton at a non-CH(2) SQ frequency, there is much reduced intensity and a maximum intensity at a short recoupling time; (iv) for the other lower intensity (1)H DQ peaks at a particular SQ frequency, maximum intensity is observed for the same (or close to the same) recoupling time, but the relative intensity of the DQ peaks is a reliable indicator of the relative H-H distance-the ratio of the maximum intensities for the peaks at the CH(Ala) SQ frequency due to the two DQCs with the NH and OH protons are found to be approximately in the ratio of the squares of the corresponding dipolar coupling constants. While the simulated (1)H DQ build-up curves reproduce most of the features of the experimental curves, maximum intensity is often observed at a longer recoupling time in simulations. In this respect, simulations for two to eight spins show a trend towards a faster decay for an increasing number of considered spins. Finally, simulations show that increasing either the Larmor frequency (to 1 GHz) or the MAS frequency (to 125 kHz) does not lead to changes in the marked differences between the (1)H DQ build-up curves at the CH(Asp) SQ frequency for DQCs to the CH(2)(a) and OH protons that correspond to similar H-H distances (2.39 A and 2.49 A, respectively).

Powder NMR crystallography of thymol

A protocol for the structure determination of powdered solids at natural abundance by NMR is presented and illustrated for the case of the small drug molecule thymol. The procedure uses proton spin-diffusion data from two-dimensional NMR experiments in combination with periodic DFT refinements incorporating (1)H and (13)C NMR chemical shifts. For thymol, the method yields a crystal structure for the powdered sample, which differs by an atomic root-mean-square-deviation (all atoms except methyl group protons) of only 0.07 A from the single crystal X-ray diffraction structure with DFT-optimized proton positions.

Practical aspects of Lee-Goldburg based CRAMPS techniques for high-resolution 1H NMR spectroscopy in solids: implementation and applications

Elucidating the local environment of the hydrogen atoms is an important problem in materials science. Because (1)H spectra in solid-state nuclear magnetic resonance (NMR) suffer from low resolution due to homogeneous broadening, even under magic-angle spinning (MAS), information of chemical interest may only be obtained using certain high-resolution (1)H MAS techniques. (1)H Lee-Goldburg (LG) CRAMPS (Combined Rotation And Multiple-Pulse Spectroscopy) methods are particularly well suited for studying inorganic-organic hybrid materials, rich in (1)H nuclei. However, setting up CRAMPS experiments is time-consuming and not entirely trivial, facts that have discouraged their widespread use by materials scientists. To change this status quo, here we describe and discuss some important aspects of the experimental implementation of CRAMPS techniques based on LG decoupling schemes, such as FSLG (Frequency Switched), and windowed and windowless PMLG (Phase Modulated). In particular, we discuss the influence on the quality of the (1)H NMR spectra of the different parameters at play, for example LG (Lee-Goldburg) pulses, radio-frequency (rf) phase, frequency switching, and pulse imperfections, using glycine and adamantane as model compounds. The efficiency and robustness of the different LG-decoupling schemes is then illustrated on the following materials: organo-phosphorus ligand, N-(phosphonomethyl)iminodiacetic acid [H(4)pmida] [I], and inorganic-organic hybrid materials (C(4)H(12)N(2))[Ge(2)(pmida)(2)OH(2)] x 4H(2)O [II] and (C(2)H(5)NH(3))[Ti(H(1.5)PO(4))(PO(4))](2) x H(2)O [III].