Silicon-based building blocks for one-step 18F-radiolabeling of peptides for PET imaging

Synthesis and Evaluation of [18F]SiFA-Conjugated Ligands for Fibroblast Activation Protein Imaging

In recent years, fibroblast activation protein (FAP) has emerged as an important target for the diagnosis and therapy of various tumors due to its high expression on the cell surface of cancer-associated fibroblasts, which are the major components of the tumor stroma. In this study, we synthesized and evaluated 18F-labeled FAP inhibitors (FAPIs) for FAP imaging. Two silicon fluoride acceptor (SiFA)-conjugated FAPIs were synthesized: one containing a γ-carboxy-l-glutamic acid (Gla) residue (1) and another containing two Gla residues (2). Both ligands exhibited high binding affinities for FAP. 18F/19F exchange reactions on both ligands were performed in the presence of 2% water. This resulted in the formation of radioligands [18F]1 and [18F]2 in high radiochemical yields. Radioligand [18F]2, with a more favorable partition coefficient, was selected for the U87MG cell binding study, and the results showed FAP-specific binding of the radioligand to the cells. An ex vivo biodistribution study in U87MG tumor-bearing mice 60 min after injection demonstrated a 5.8-fold higher tumor accumulation of [18F]2 than that of [18F]1. Furthermore, PET and ex vivo biodistribution studies of [18F]2 in U87MG tumor-bearing mice showed high and persistent tumor uptake over time, which was significantly blocked by the preinjection of FAPI-04. Our results indicate that [18F]SiFA-(Gla)2-conjugated FAPI ([18F]2) has the potential for FAP imaging.

Surfactants Accelerate Isotope Exchange-Based 18F-Fluorination in Water

Radiochemical yields (RCYs) of isotope exchange-based ¹⁸F-fluorination of non-carbon-centered substrates in water are rationally enhanced by adding surfactants, which increases both the rate constant k and local reactant concentrations. Among 12 surfactants, the cationic surfactant cetrimonium bromide (CTAB) and two nonionic surfactants (Tween 20 and Tween 80) were selected for their superior catalytic effects, namely, electrostatic effects or solubilization effects. For a model substrate, bis(4-methoxyphenyl)phosphinic fluoride, the ¹⁸F-fluorination rate constant (k) increased up to 7-fold, while its saturation concentration rose up to 15-fold due to micelle formation, encapsulating 70-94% of the substrate. With 30.0 mmol/L CTAB, the required ¹⁸F-labeling temperature of a typical organofluorosilicon prosthesis ([¹⁸F]SiFA) decreased from 95 °C to room temperature, achieving an RCY of 22%. For an E[c(RGDyK)]₂-derived peptide tracer with an organofluorophosphine prosthesis, the RCY in water at 90 °C achieved 25%, correspondingly increasing the molar activity (A_m). After high-performance liquid chromatography (HPLC) or solid-phase purification, the residual selected surfactant concentrations in the tracer injections were well below the FDA DII (Inactive Ingredient Database) limits or the LD50 in mice.

An Investigation into the In Vitro Metabolic Stability of Aryl Sulfonyl Fluorides for their Application in Medicinal Chemistry and Radiochemistry

Molecules that feature a sulfonyl fluoride (SO₂F) moiety have been gaining increasing interest due to their unique reactivity and potential applications in synthetic chemistry, medicinal chemistry, and other biological uses. A particular interest is towards ¹⁸F-radiochemistry where sulfonyl fluorides can be used as a method to radiolabel biomolecules or can be used as radiofluoride relay reagents that facilitate radiolabeling of other molecules. The low metabolic stability of sulfonyl fluoride S-F bonds, however, presents an issue and limits the applicability of sulfonyl fluorides. The aim of this work was to increase understanding of what features contribute to the metabolic instability of the S-F bond in model aryl sulfonyl fluorides and identify approaches to increasing sulfonyl fluoride stability for ¹⁸F-radiochemistry and other medicinal, synthetic chemistry and biological applications. To undertake this, 14 model aryl sulfonyl fluorides compounds with varying functional groups and substitution patterns were investigated, and their stabilities were examined in various media, including phosphate-buffered saline and rat serum as a model for biological conditions. The results indicate that both electronic and steric factors affect the stability of the S-F bond, with the 2,4,6-trisubstituted model aryl sulfonyl fluorides examined displaying the highest in vitro metabolic stability.

Fully automated 18F-fluorination of N-succinimidyl-4-[18F]fluorobenzoate ([18F]SFB) for indirect labelling of nanobodies

N-succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB), a widely used labeling agent to introduce the 4-[¹⁸F]fluorobenzoyl-prosthetic group, is normally obtained in three consecutive steps from [¹⁸F]fluoride ion. Here, we describe an efficient one-step labeling procedure of [¹⁸F]SFB starting from a tin precursor. This method circumvents volatile radioactive side-products and simplifies automatization. [¹⁸F]SFB was obtained after HPLC purification in a yield of 42 + 4% and a radiochemical purity (RCP) > 99% (n = 6). In addition, we investigate the automation of the coupling of [¹⁸F]SFB to a nanobody (cAbBcII10, targeting β-lactamase enzyme) and purification by size exclusion chromatography (PD-10 desalting column) to remove unconjugated reagent. Production and use of [¹⁸F]SFB were implemented on a radiosynthesis unit (Neptis^®). The fully automated radiosynthesis process including purification and formulation required 160 min of synthesis time. [¹⁸F]SFB-labeled nanobody was obtained in a yield of 21 + 2% (activity yield 12 + 1% non-decay corrected) and a radiochemical purity (RCP) of > 95% (n = 3). This approach simplifies [¹⁸F]SFB synthesis to one-step, enhances the yield in comparison to the previous report and enables the production of radiolabeled nanobody on the same synthesis module.

Last-step 18F-fluorination of supported 2-(aryl-di-tert-butylsilyl)-N-methyl-imidazole conjugates for applications in positron emission tomography

Aiming for potential applications in positron emission tomography, fully automated productions of ¹⁸F-labelled bioconjugates were achieved using heterogenous precursors obtained by anchoring imidazole-di-tert-butyl-arylsilanes to a polystyrene resin. The reactions were performed using either "batch" or "flow" procedures, avoiding both the time-consuming azeotropic drying and HPLC purifications usually required.

Promise and challenges of clinical non-invasive T-cell tracking in the era of cancer immunotherapy

In the last decades, our understanding of the role of the immune system in cancer has significantly improved and led to the discovery of new immunotherapeutic targets and tools, which boosted the advances in cancer immunotherapy to fight a growing number of malignancies. Approved immunotherapeutic approaches are currently mainly based on immune checkpoint inhibitors, antibody-derived targeted therapies, or cell-based immunotherapies. In essence, these therapies induce or enhance the infiltration and function of tumor-reactive T cells within the tumors, ideally resulting in complete tumor eradication. While the clinical application of immunotherapies has shown great promise, these therapies are often accompanied either by a variety of side effects as well as partial or complete unresponsiveness of a number of patients. Since different stages of disease progression elicit different local and systemic immune responses, the ability to longitudinally interrogate the migration and expansion of immune cells, especially T cells, throughout the whole body might greatly facilitate disease characterization and understanding. Furthermore, it can serve as a tool to guide development as well as selection of appropriate treatment regiments. This review provides an overview about a variety of immune-imaging tools available to characterize and study T-cell responses induced by anti-cancer immunotherapy. Moreover, challenges are discussed that must be taken into account and overcome to use immune-imaging tools as predictive and surrogate markers to enhance assessment and successful application of immunotherapies.

Recent Advances in the Clinical Translation of Silicon Fluoride Acceptor (SiFA) 18F-Radiopharmaceuticals

The incorporation of silicon fluoride acceptor (SiFA) moieties into a variety of molecules, such as peptides, proteins and biologically relevant small molecules, has improved the generation of ¹⁸F-radiopharmaceuticals for medical imaging. The efficient isotopic exchange radiofluorination process, in combination with the enhanced [¹⁸F]SiFA in vivo stability, make it a suitable strategy for fluorine-18 incorporation. This review will highlight the clinical applicability of [¹⁸F]SiFA-labeled compounds and discuss the significant radiotracers currently in clinical use.

Reaction of [18F]Fluoride at Heteroatoms and Metals for Imaging of Peptides and Proteins by Positron Emission Tomography

The ability to radiolabel proteins with [18F]fluoride enables the use of positron emission tomography (PET) for the early detection, staging and diagnosis of disease. The direct fluorination of native proteins through C-F bond formation is, however, a difficult task. The aqueous environments required by proteins severely hampers fluorination yields while the dry, organic solvents that promote nucleophilic fluorination can denature proteins. To circumvent these issues, indirect fluorination methods making use of prosthetic groups that are first fluorinated and then conjugated to a protein have become commonplace. But, when it comes to the radiofluorination of proteins, these indirect methods are not always suited to the short half-life of the fluorine-18 radionuclide (110 min). This review explores radiofluorination through bond formation with fluoride at boron, metal complexes, silicon, phosphorus and sulfur. The potential for these techniques to be used for the direct, aqueous radiolabeling of proteins with [18F]fluoride is discussed.

Automated Synthesis of Fluorine-18 Labeled CXCR4 Ligand via the Conjugation with Nicotinic Acid N-Hydroxysuccinimide Ester (6-[18F]SFPy)

The C-X-C motif chemokine receptor 4 (CXCR4) is a seven-transmembrane G protein-coupled receptor that is overexpressed in numerous diseases, particularly in various cancers and is a powerful chemokine, attracting cells to the bone marrow niche. Therefore, CXCR4 is an attractive target for imaging and therapeutic purposes. The goal of this study is to develop an efficient, reproducible, and straightforward method to prepare a fluorine-18 labeled CXCR4 ligand. 6-[18F]Fluoronicotinic acid-2,3,5,6-tetrafluorophenyl ester (6-[18F]FPy-TFP) and nicotinic acid N-hydroxysuccinimide ester (6-[18F]SFPy) have been prepared using 'fluorination on the Sep-Pak' method. Conjugation of 6-[18F]SFPy or 6-[18F]FPy-TFP with the alpha-amino group at the N terminus of the protected T140 precursor followed by deprotection, yielded the final product 6-[18F]FPy-T140. The overall radiochemical yields were 6-17% (n = 15, decay-corrected) in a 90-min radiolabeling time with a radiochemical purity >99%. 6-[18F]FPy-T140 exhibited high specific binding and nanomolar affinity for CXCR4 in vitro, indicating that the biological activity of the peptide was preserved. For the first time, [18F]SFPy has been prepared using 'fluorination on the Sep-Pak' method that allows rapid automated synthesis of 6-[18F]FPy-T140. In addition to increased synthetic efficiency, this construct binds with CXCR4 in high affinity and may have potential as an in vivo positron emission tomography (PET) imaging agent. This radiosynthesis method should encourage wider use of this PET agent to quantify CXCR4 in both research and clinical settings.

Chemistry for Positron Emission Tomography: Recent Advances in 11 C-, 18 F-, 13 N-, and 15 O-Labeling Reactions

Positron emission tomography (PET) is a molecular imaging technology that provides quantitative information about function and metabolism in biological processes in vivo for disease diagnosis and therapy assessment. The broad application and rapid advances of PET has led to an increased demand for new radiochemical methods to synthesize highly specific molecules bearing positron-emitting radionuclides. This Review provides an overview of commonly used labeling reactions through examples of clinically relevant PET tracers and highlights the most recent developments and breakthroughs over the past decade, with a focus on 11 C, 18 F, 13 N, and 15 O.

Fully automated radiosynthesis of [18F]fluoro-C-glyco-c(RGDfC): exploiting all the abilities of the AllInOne synthesizer

Fully automated and modular radiosynthesis of [¹⁸F]fluoro-C-glyco-RGD conjugate.

Target identification for the diagnosis and intervention of vulnerable atherosclerotic plaques beyond 18F-fluorodeoxyglucose positron emission tomography imaging: promising tracers on the horizon

Cardiovascular disease is the major cause of morbidity and mortality in developed countries and atherosclerosis is the major cause of cardiovascular disease. Atherosclerotic lesions obstruct blood flow in the arterial vessel wall and can rupture leading to the formation of occlusive thrombi. Conventional diagnostic tools are still of limited value for identifying the vulnerable arterial plaque and for predicting its risk of rupture and of releasing thromboembolic material. Knowledge of the molecular and biological processes implicated in the process of atherosclerosis will advance the development of imaging probes to differentiate the vulnerable plaque. The development of imaging probes with high sensitivity and specificity in identifying high-risk atherosclerotic vessel wall changes and plaques is crucial for improving knowledge-based decisions and tailored individual interventions. Arterial PET imaging with ¹⁸F-FDG has shown promising results in identifying inflammatory vessel wall changes in numerous studies and clinical trials. However, due to its limited specificity in general and its intense physiological uptake in the left ventricular myocardium that impair imaging of the coronary arteries, different PET tracers for the molecular imaging of atherosclerosis have been evaluated. This review describes biological, chemical and medical expertise supporting a translational approach that will enable the development of new or the evaluation of existing PET tracers for the identification of vulnerable atherosclerotic plaques for better risk prediction and benefit to patients.

Highly hindered 2-(aryl-di-tert-butylsilyl)-N-methyl-imidazoles: a new tool for the aqueous 19F- and 18F-fluorination of biomolecule-based structures

A new class of silicon-based fluoride acceptors with a C-linked heterocycle as the leaving group was synthesized in one step from commercial chemicals, and linked to biomolecules. The resulting conjugates were efficiently 19F-fluorinated in aqueous mixtures, and switching to 18F-labelling provided nucleoside- and peptide-based bioconjugates with excellent molar activities suitable for biological applications.

The 4-N-acyl and 4-N-alkyl gemcitabine analogues with silicon-fluoride-acceptor: Application to 18F-Radiolabeling

The coupling of gemcitabine with functionalized carboxylic acids using peptide coupling conditions afforded 4-N-alkanoyl analogues with a terminal alkyne or azido moiety. Reaction of 4-N-tosylgemcitabine with azidoalkyl amine provided 4-N-alkyl gemcitabine with a terminal azido group. Click reaction with silane building blocks afforded 4-N-alkanoyl or 4-N-alkyl gemcitabine analogues suitable for fluorination. RP-HPLC analysis indicated better chemical stability of 4-N-alkyl gemcitabine analogues versus 4-N-alkanoyl analogues in acidic aqueous conditions. The 4-N-alkanoyl gemcitabine analogues showed potent cytostatic activity against L1210 cell line, but cytotoxicity of the 4-N-alkylgemcitabine analogues was low. However, 4-N-alkanoyl and 4-N-alkyl analogues had comparable antiproliferative activities in the HEK293 cells. The 4-N-alkyl analogue with a terminal azide group was shown to be localized inside HEK293 cells by fluorescence microscopy after labelling with Fluor 488-alkyne. The [18F]4-N-alkyl or alkanoyl silane gemcitabine analogues were successfully synthesized using microscale and conventional silane-labeling radiochemical protocols. Preliminary positron-emission tomography (PET) imaging in mice showed the biodistribution of [18F]4-N-alkyl to have initial concentration in the liver, kidneys and GI tract followed by increasing signal in the bone.

18F-AlF Labeled Peptide and Protein Conjugates as Positron Emission Tomography Imaging Pharmaceuticals

The clinical applications of positron emission tomography (PET) imaging pharmaceuticals have increased tremendously over the past several years since the approval of ¹⁸fluorine-fluorodeoxyglucose (¹⁸F-FDG) by the Food and Drug Administration (FDA). Numerous ¹⁸F-labeled target-specific potential imaging pharmaceuticals, based on small and large molecules, have been evaluated in preclinical and clinical settings. ¹⁸F-labeling of organic moieties involves the introduction of the radioisotope by C-¹⁸F bond formation via a nucleophilic or an electrophilic substitution reaction. However, biomolecules, such as peptides, proteins, and oligonucleotides, cannot be radiolabeled via a C-¹⁸F bond formation as these reactions involve harsh conditions, including organic solvents, high temperature, and nonphysiological conditions. Several approaches, including ¹⁸F-labeled prosthetic groups, silicon, boron, and aluminum fluoride acceptor chemistry, and click chemistry have been developed, in the past, for ¹⁸F labeling of biomolecules. Linear and macrocyclic polyaminocarboxylates and their analogs and derivatives form thermodynamically stable and kinetically inert aluminum chelates. Hence, macrocyclic polyaminocarboxylates have been used for conjugation with biomolecules, such as folate, peptides, affibodies, and protein fragments, followed by ¹⁸F-AlF chelation, and evaluation of their targeting abilities in preclinical and clinical environments. The goal of this report is to provide an overview of the ¹⁸F radiochemistry and ¹⁸F-labeling methodologies for small molecules and target-specific biomolecules, a comprehensive review of coordination chemistry of Al³⁺, ¹⁸F-AlF labeling of peptide and protein conjugates, and evaluation of ¹⁸F-labeled biomolecule conjugates as potential imaging pharmaceuticals.

Radiosynthesis and evaluation of an 18F-labeled silicon containing exendin-4 peptide as a PET probe for imaging insulinoma

Background

Analogues of exendin-4 have been radiolabeled for imaging the glucagon-like peptide type 1 receptors (GLP-1R) which are overexpressed in insulinoma. The aim of this research was to synthesize an ¹⁸F–labeled silicon containing exendin-4 peptide (¹⁸F-2) and to evaluate its in vitro and in vivo behavior in CHL-GLP-1 receptor positive tumor-bearing mice.

¹⁸F–labeled silicon containing exendin-4 peptide (¹⁸F-2) was prepared via one-step nucleophilic substitution of a silane precursor with ¹⁸F–fluoride in the presence of acetic acid and K222. ¹⁸F-2 was then administered to tumor-bearing mice for PET imaging and ex vivo biodistribution experiments.

Results

¹⁸F-2 was produced in a radiochemical yield (decay corrected) of 1.5% and a molar activity of max. 16 GBq/μmol. The GLP-1R positive tumors were clearly visualized by PET imaging. Biodistribution studies showed reduced uptake of ¹⁸F-2 in the kidneys compared to radiometal labeled exendin-4 derivatives. The radiotracer showed specific tumour uptake which remained steady over 2 h.

Conclusions

This exendin-4 analogue, ¹⁸F-2, is a potential probe for imaging GLP-1R positive tumors.

18 F-Labeling of Sensitive Biomolecules for Positron Emission Tomography

Positron emission tomography (PET) imaging study of fluorine-18 labeled biomolecules is an emerging and rapidly growing area for preclinical and clinical research. The present review focuses on recent advances in radiochemical methods for incorporating fluorine-18 into biomolecules via "direct" or "indirect" bioconjugation. Recently developed prosthetic groups and pre-targeting strategies, as well as representative examples in 18 F-labeling of biomolecules in PET imaging research studies are highlighted.

Direct 11CN-Labeling of Unprotected Peptides via Palladium-Mediated Sequential Cross-Coupling Reactions

A practical procedure for ¹¹CN-labeling of unprotected peptides has been developed. The method was shown to be highly chemoselective for cysteine over other potentially nucleophilic residues, and the radiolabeled products were synthesized and purified in less than 15 min. Appropriate for biomedical applications, the method could be used on an extremely small scale (20 nmol) with a high radiochemical yield. The success of the protocol stems from the use of a Pd-reagent based on a dihaloarene, which enables direct "nucleophile-nucleophile" coupling of the peptide and [¹¹C]cyanide by temporal separation of nucleophile addition.

Crown Ether Nucleophilic Catalysts (CENCs): Agents for Enhanced Silicon Radiofluorination

New bifunctional phase transfer agents were synthesized and investigated for their abilities to promote rapid fluorination at silicon. These agents, dubbed crown ether nucleophilic catalysts (CENCs), are 18-crown-6 derivatives containing a side-arm and a potentially nucleophilic hydroxyl group. These CENCs proved efficacious in the fluorination of hindered silicon substrates, with fluorination yields dependent on the length of linker connecting the metal chelating unit to the hydroxyl group. The efficacy of these CENCs was also demonstrated for rapid radiofluorination under mild conditions for eventual application in molecular imaging with positron emission tomography (PET). The hydrolysis-resistant aryl silicon fragment is promising as a convenient synthon for labeling potential PET radiotracers.

Fast indirect fluorine-18 labeling of protein/peptide using the useful 6-fluoronicotinic acid-2,3,5,6-tetrafluorophenyl prosthetic group: A method comparable to direct fluorination

Fluorine-18 labeling of biomolecules is mostly performed by an indirect labeling method using a prosthetic group. Fluorine-18 labeled 6-fluoronicotinic acid-2,3,5,6-tetrafluorophenyl ester is a useful prosthetic group to radiolabel a protein. Recently, we reported an improved preparation of this prosthetic group. To test the conjugation efficiency of the labeled ester prepared by this method, we have performed conjugation reactions with a peptide, a protein, and a small molecule. Prostate-specific membrane antigen targeting small molecule [18 F]DCFPyL, αvβ3 integrin receptors targeting peptide [18 F]c(RGDfK) and [18 F]albumin were prepared in good radiochemical yields. The conjugation reactions were completed at 40°C to 50°C in 10 minutes. The overall radiochemical yield was 25% to 43% in 30 to 45 minutes.

Synthesis of 3-chloro-6-((4-(di-tert-butyl[(18)F]fluorosilyl)-benzyl)oxy)-1,2,4,5-tetrazine ([(18)F]SiFA-OTz) for rapid tetrazine-based (18)F-radiolabeling

An efficient method to prepare the (18)F-labeled tetrazine-derivative [(18)F]-SiFA-OTz for bioorthogonal radiochemistry was developed. [(18)F]-SiFA-OTz can be synthesized with a radiochemical yield of 78 ± 5% within 25 min and can quantitatively react with a model strained dienophile, trans-cyclooctenol.

Radiolabeled cyclic RGD peptides as radiotracers for tumor imaging

The integrin family comprises 24 transmembrane receptors, each a heterodimeric combination of one of 18α and one of 8β subunits. Their main function is to integrate the cell adhesion and interaction with the extracellular microenvironment with the intracellular signaling and cytoskeletal rearrangement through transmitting signals across the cell membrane upon ligand binding. Integrin α_vβ₃ is a receptor for the extracellular matrix proteins containing arginine–glycine–aspartic (RGD) tripeptide sequence. The α_vβ₃ is generally expressed in low levels on the epithelial cells and mature endothelial cells, but it is highly expressed in many solid tumors. The α_vβ₃ levels correlate well with the potential for tumor metastasis and aggressiveness, which make it an important biological target for development of antiangiogenic drugs, and molecular imaging probes for early tumor diagnosis. Over the last decade, many radiolabeled cyclic RGD peptides have been evaluated as radiotracers for imaging tumors by SPECT or PET. Even though they are called “α_vβ₃-targeted” radiotracers, the radiolabeled cyclic RGD peptides are also able to bind α_vβ₅, α₅β₁, α₆β₄, α₄β₁, and α_vβ₆ integrins, which may help enhance their tumor uptake due to the “increased receptor population.” This article will use the multimeric cyclic RGD peptides as examples to illustrate basic principles for development of integrin-targeted radiotracers and focus on different approaches to maximize their tumor uptake and T/B ratios. It will also discuss important assays for pre-clinical evaluations of the integrin-targeted radiotracers, and their potential applications as molecular imaging tools for noninvasive monitoring of tumor metastasis and early detection of the tumor response to antiangiogenic therapy.

From Unorthodox to Established: The Current Status of (18)F-Trifluoroborate- and (18)F-SiFA-Based Radiopharmaceuticals in PET Nuclear Imaging

Unorthodox (18)F-labeling strategies not employing the formation of a carbon-(18)F bond are seldom found in radiochemistry. Historically, the formation of a boron- or silicon-(18)F bond has been introduced very early on into the repertoire of labeling chemistries, but is without translation into any clinical radiotracer besides inorganic B[(18)F]F4(-) for brain tumor diagnosis. For many decades these labeling methodologies were forgotten and have just recently been revived by a handful of researchers thinking outside the box. When breaking with established paradigms such as the inability to obtain labeled compounds of high specific activity via isotopic exchange or performing radiofluorination in aqueous media, the research community often reacts skeptically. In 2005 and 2006, two novel labeling methodologies were introduced into radiochemistry for positron emission tomography (PET) tracer development: RBF3(-) labeling reported by Perrin et al. and the SiFA methodology by Schirrmacher, Jurkschat, and Waengler et al. which is based on isotopic exchange (IE). Both labeling methodologies have been complemented by other noncanonical strategies to introduce (18)F into biomolecules of diagnostic importance, thus profoundly enriching the landscape of (18)F radiolabeling. B- and Si-based labeling strategies finally revealed that IE is a viable alternative to established and traditional radiochemistry with the advantage of simplifying both the labeling effort as well as the necessary purification of the radiotracer. Hence IE will be the focus of this contribution over other noncanonical labeling methods. Peptides for tumor imaging especially lend themselves favorably toward one-step labeling via IE, but small molecules have been described as well, taking advantage of these new approaches, and have been used successfully for brain imaging. This Review gives an account of both radiochemistries centered on boron and silicon, describing the very beginnings of their basic research, the path that led to optimization of their chemistries, and the first encouraging preclinical results paving the way to their clinical use. This side by side approach will give the reader the opportunity to follow the development of a new basic discovery into a clinically applicable radiotracer including all the hurdles that have had to be overcome.

[(18)F]-Group 13 fluoride derivatives as radiotracers for positron emission tomography

The field of (18)F chemistry is rapidly expanding because of the use of this radionuclide in radiotracers for positron emission tomography (PET). Until recently, most [(18)F]-radiotracers were generated by the direct attachment of (18)F to a carbon in the organic backbone of the radiotracer. The past decade has witnessed the emergence of a new strategy based on the formation of an (18)F-group 13 element bond. This approach, which is rooted in the field of fluoride anion complexation/coordination chemistry, has led to the development of a remarkable family of boron, aluminium and gallium [(18)F]-fluoride anion complexing agents which can be conjugated with peptides and small molecules to generate disease specific PET radiotracers. This review is dedicated to the chemistry of these group 13 [(18)F]-fluorides anion complexing agents and their use in PET. Some of the key fluoride-binding motifs covered in this review include the trifluoroborate unit bound to neutral or cationic electron deficient backbones, the BF2 unit of BODIPY dyes, and AlF or GaF3 units coordinated to multidentate Lewis basic ligands. In addition to describing how these moieties can be converted into their [(18)F]-analogs, this review also dicusses their incorporation into bioconjugates for application in PET.

Next Generation of SiFAlin-Based TATE Derivatives for PET Imaging of SSTR-Positive Tumors: Influence of Molecular Design on In Vitro SSTR Binding and In Vivo Pharmacokinetics

The Silicon-Fluoride-Acceptor (SiFA)-(18)F-labeling strategy has been shown before to enable the straightforward and efficient (18)F-labeling of complex biologically active substances such as proteins and peptides. Especially in the case of peptides, the radiolabeling proceeds kit-like in short reaction times and without the need of complex product workup. SiFA-derivatized, (18)F-labeled Tyr(3)-octreotate (TATE) derivatives demonstrated, besides strong somatostatin receptor (SSTR) binding, favorable in vivo pharmacokinetics as well as excellent tumor visualization by PET imaging. In this study, we intended to determine the influence of the underlying molecular design and used molecular scaffolds of SiFAlin-TATE derivatives on SSTR binding as well as on the in vivo pharmacokinetics of the resulting (18)F-labeled peptides. For this purpose, new SiFAlin-(Asp)n-PEG1-TATE analogs (where n = 1-4) were synthesized, efficiently radiolabeled with (18)F in a kit-like manner and obtained in radiochemical yields of 70-80%, radiochemical purities of ≥97%, and nonoptimized specific activities of 20.1-45.2 GBq/μmol within 20-25 min starting from 0.7-1.5 GBq of (18)F. In the following, the radiotracer's lipophilicities and stabilities in human serum were determined. Furthermore, the SSTR-specific binding affinities were evaluated by a competitive displacement assay on SSTR-positive AR42J cells. The obtained in vitro results support the assumption that aspartic acids are able to considerably increase the radiotracer's hydrophilicity and that their number does not affect the SSTR binding potential of the TATE derivatives. The most promising tracer (18)F-SiFAlin-Asp3-PEG1-TATE [(18)F]6 (LogD = -1.23 ± 0.03, IC50 = 20.7 ± 2.5 nM) was further evaluated in vivo in AR42J tumor-bearing nude mice via PET/CT imaging against the clinical gold standard (68)Ga-DOTATATE as well as the previously developed SiFAlin-TATE derivative [(18)F]3. The results of these evaluations showed that [(18)F]6-although showing very similar chemical and in vitro properties to [(18)F]3-exhibits not only a slowed renal clearance compared to [(18)F]3, but also a higher absolute tumor uptake compared to (68)Ga-DOTATATE, and furthermore enables excellent tumor visualization with high image resolution. These results emphasize the importance of systematic study of the influence of molecular design and applied structure elements of peptidic radiotracers, as these may considerably influence in vivo pharmacokinetics while not affecting other parameters such as radiochemistry, lipophilicity, serum stability, or receptor binding potential.

Methods to Increase the Metabolic Stability of (18)F-Radiotracers

The majority of pharmaceuticals and other organic compounds incorporating radiotracers that are considered foreign to the body undergo metabolic changes in vivo. Metabolic degradation of these drugs is commonly caused by a system of enzymes of low substrate specificity requirement, which is present mainly in the liver, but drug metabolism may also take place in the kidneys or other organs. Thus, radiotracers and all other pharmaceuticals are faced with enormous challenges to maintain their stability in vivo highlighting the importance of their structure. Often in practice, such biologically active molecules exhibit these properties in vitro, but fail during in vivo studies due to obtaining an increased metabolism within minutes. Many pharmacologically and biologically interesting compounds never see application due to their lack of stability. One of the most important issues of radiotracers development based on fluorine-18 is the stability in vitro and in vivo. Sometimes, the metabolism of ¹⁸F-radiotracers goes along with the cleavage of the C-F bond and with the rejection of [¹⁸F]fluoride mostly combined with high background and accumulation in the skeleton. This review deals with the impact of radiodefluorination and with approaches to stabilize the C-F bond to avoid the cleavage between fluorine and carbon.

Radiolabeled Cyclic RGD Peptide Bioconjugates as Radiotracers Targeting Multiple Integrins

Angiogenesis is a requirement for tumor growth and metastasis. The angiogenic process depends on vascular endothelial cell migration and invasion, and is regulated by various cell adhesion receptors. Integrins are such a family of receptors that facilitate the cellular adhesion to and migration on extracellular matrix proteins in the intercellular spaces and basement membranes. Among 24 members of the integrin family, αvβ3 is studied most extensively for its role in tumor angiogenesis and metastasis. The αvβ3 is expressed at relatively low levels on epithelial cells and mature endothelial cells, but it is highly expressed on the activated endothelial cells of tumor neovasculature and some tumor cells. This restricted expression makes αvβ3 an excellent target to develop antiangiogenic drugs and diagnostic molecular imaging probes. Since αvβ3 is a receptor for extracellular matrix proteins with one or more RGD tripeptide sequence, many radiolabeled cyclic RGD peptides have been evaluated as "αvβ3-targeted" radiotracers for tumor imaging over the past decade. This article will use the dimeric and tetrameric cyclic RGD peptides developed in our laboratories as examples to illustrate basic principles for development of αvβ3-targeted radiotracers. It will focus on different approaches to maximize the radiotracer tumor uptake and tumor/background ratios. This article will also discuss some important assays for preclinical evaluations of integrin-targeted radiotracers. In general, multimerization of cyclic RGD peptides increases their integrin binding affinity and the tumor uptake and retention times of their radiotracers. Regardless of their multiplicity, the capability of cyclic RGD peptides to bind other integrins (namely, αvβ5, α5β1, α6β4, α4β1, and αvβ6) is expected to enhance the radiotracer tumor uptake due to the increased integrin population. The results from preclinical and clinical studies clearly show that radiolabeled cyclic RGD peptides (such as (99m)Tc-3P-RGD2, (18)F-Alfatide-I, and (18)F-Alfatide-II) are useful as the molecular imaging probes for early cancer detection and noninvasive monitoring of the tumor response to antiangiogenic therapy.

New strategies for rapid (18)F-radiolabeling of biomolecules for radionuclide-based in vivo imaging

The increasing availability of highly active no-carrier-added [(18)F]-fluoride makes its use in radiolabeling biomolecules attractive. By incorporating "fluorophilic" elements (Si, B, and Al) into biomolecules, recent advances offer mild and rapid (18)F-labeling approaches without HPLC purification at the radiosynthetic stage while maintaining sufficient specific activity. In this Topical Review, we will discuss the most recent strides in the field.

In Vivo Evaluation of ¹⁸F-SiFAlin-Modified TATE: A Potential Challenge for ⁶⁸Ga-DOTATATE, the Clinical Gold Standard for Somatostatin Receptor Imaging with PET

Radiolabeled peptides for tumor imaging with PET that can be produced with kits are currently in the spotlight of radiopharmacy and nuclear medicine. The diagnosis of neuroendocrine tumors in particular has been a prime example for the usefulness of peptides labeled with a variety of different radionuclides. Among those, (68)Ga and (18)F stand out because of the ease of radionuclide introduction (e.g., (68)Ga isotope) or optimal nuclide properties for PET imaging (slightly favoring the (18)F isotope). The in vivo properties of good manufacturing practice-compliant, newly developed kitlike-producible (18)F-SiFA- and (18)F-SiFAlin- (SiFA = silicon-fluoride acceptor) modified TATE derivatives were compared with the current clinical gold standard (68)Ga-DOTATATE for high-quality imaging of somatostatin receptor-bearing tumors.

METHODS

SiFA- and SiFAlin-derivatized somatostatin analogs were synthesized and radiolabeled using cartridge-based dried (18)F and purified via a C18 cartridge (radiochemical yield 49.8% ± 5.9% within 20-25 min) without high-performance liquid chromatography purification. Tracer lipophilicity and stability in human serum were tested in vitro. Competitive receptor binding affinity studies were performed using AR42J cells. The most promising tracers were evaluated in vivo in an AR42J xenograft mouse model by ex vivo biodistribution and in vivo PET/CT imaging studies for evaluation of their pharmacokinetic profiles, and the results were compared with those of the current clinical gold standard (68)Ga-DOTATATE.

RESULTS

Synthetically easily accessible (18)F-labeled silicon-fluoride acceptor-modified somatostatin analogs were developed. They exhibited high binding affinities to somatostatin receptor-positive tumor cells (1.88-14.82 nM). The most potent compound demonstrated comparable pharmacokinetics and an even slightly higher absolute tumor accumulation level in ex vivo biodistribution studies as well as higher tumor standardized uptake values in PET/CT imaging than (68)Ga-DOTATATE in vivo. The radioactivity uptake in nontumor tissue was higher than for (68)Ga-DOTATATE.

CONCLUSION

The introduction of the novel SiFA building block SiFAlin and of hydrophilic auxiliaries enables a favorable in vivo biodistribution profile of the modified TATE peptides, resulting in high tumor-to-background ratios although lower than those observed with (68)Ga-DOTATATE. As further advantage, the SiFA methodology enables a kitlike labeling procedure for (18)F-labeled peptides advantageous for routine clinical application.

¹⁸F-labeled silicon-based fluoride acceptors: potential opportunities for novel positron emitting radiopharmaceuticals

BACKGROUND

Over the recent years, radiopharmaceutical chemistry has experienced a wide variety of innovative pushes towards finding both novel and unconventional radiochemical methods to introduce fluorine-18 into radiotracers for positron emission tomography (PET). These "nonclassical" labeling methodologies based on silicon-, boron-, and aluminium-(18)F chemistry deviate from commonplace bonding of an [(18)F]fluorine atom ((18)F) to either an aliphatic or aromatic carbon atom. One method in particular, the silicon-fluoride-acceptor isotopic exchange (SiFA-IE) approach, invalidates a dogma in radiochemistry that has been widely accepted for many years: the inability to obtain radiopharmaceuticals of high specific activity (SA) via simple IE.

METHODOLOGY

The most advantageous feature of IE labeling in general is that labeling precursor and labeled radiotracer are chemically identical, eliminating the need to separate the radiotracer from its precursor. SiFA-IE chemistry proceeds in dipolar aprotic solvents at room temperature and below, entirely avoiding the formation of radioactive side products during the IE.

SCOPE OF REVIEW

A great plethora of different SiFA species have been reported in the literature ranging from small prosthetic groups and other compounds of low molecular weight to labeled peptides and most recently affibody molecules.

CONCLUSIONS

The literature over the last years (from 2006 to 2014) shows unambiguously that SiFA-IE and other silicon-based fluoride acceptor strategies relying on (18)F(-) leaving group substitutions have the potential to become a valuable addition to radiochemistry.

Rapid (18)F-labeling and loading of PEGylated gold nanoparticles for in vivo applications

Water-soluble 3 nm maleimide-terminated PEGylated gold nanoparticles (maleimide-AuNP) were synthesized in both partially hydrolyzed and nonhydrolyzed forms. Both of these maleimide-AuNPs, when reacted with the silicon-fluorine prosthetic group [(18)F]SiFA-SH, resulted in radiolabeled AuNPs. These NPs were readily purified with high radiochemical yields (RCY) of 60-80% via size exclusion chromatography. Preliminary small animal positron emission tomography (PET) measurements in healthy rats gives information about the pathway of excretion and the stability of the radioactive label in vivo. The partially hydrolyzed [(18)F]SiFA-maleimide-AuNPs shows uptake in the brain region of interest (ROI) (> 0.13%ID/g) which was confirmed by ex vivo examination of the thoroughly perfused rat brain. The multiple maleimide end groups on the AuNP surface also allows for the simultaneous incorporation of [(18)F]SiFA-SH and a bioactive peptide (cysteine-modified octreotate, cys-TATE, which can bind to somatostatin receptor subtypes 2 and 5) in a proof-of-concept study. The well-defined Michael addition reaction between various thiol containing molecules and the multifunctionalized maleimide-AuNPs thus offers an opportunity to develop a new bioconjugation platform for new diagnostics as well as therapeutics.

One-pot two-step radiosynthesis of a new (18)F-labeled thiol reactive prosthetic group and its conjugate for insulinoma imaging

N-(2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)ethyl)-6-fluoronicotinamide ([¹⁸F]FNEM), a novel prosthetic agent that is thiol-specific, was synthesized using a one-pot two-step strategy: (1) ¹⁸F incorporation by a nucleophilic displacement of trimethylammonium substrate under mild conditions; (2) amidation of the resulting 6-[¹⁸F]fluoronicotinic acid 2,3,5,6-tetrafluorophenyl ester with N-(2-aminoethyl)maleimide trifluoroacetate salt. The radiosynthesis of the maleimide tracer was completed in 75 min from [¹⁸F]fluoride with 26 ± 5% decay uncorrected radiochemical yield, and specific activity of 19–88 GBq/μmol (decay uncorrected). The in vitro cell uptake, in vivo biodistribution, and positron emission tomography (PET) imaging properties of its conjugation product with [Cys⁴⁰]-exendin-4 were described. [¹⁸F]FNEM-Cys⁴⁰-exendin-4 showed specific targeting of glucagon-like peptide 1 receptor (GLP-1R) positive insulinomas and comparable imaging results to our recently reported [¹⁸F]FPenM-Cys⁴⁰-exendin-4.

Automated radiosynthesis of N-succinimidyl 3-(di-tert-butyl[(18)F]fluorosilyl)benzoate ([(18)F]SiFB) for peptides and proteins radiolabeling for positron emission tomography

Recently, silicon fluoride building blocks (SiFA) have emerged as valuable and promising tools to overcome challenges in the labeling of peptides and proteins for positron emission tomography (PET). Herein, we report a fully automated synthesis of N-succinimidyl 3-(di-tert-butyl[(18)F]fluorosilyl)benzoate ([(18)F]SiFB) by a commercially available Scintomics Hot Box 3 synthesis module, to be used as a prosthetic group for peptide and protein labeling. The drying of K2.2.2./K (18)F complex was performed according to the Munich method modified by our group (avoiding azeotropic drying) using oxalic acid to neutralize the base from the (18)F(-) containing QMA eluent. This K2.2.2./K (18)F complex was then used for SiFA (18)F-(19)F isotopic exchange followed by a fast purification by a solid-phase-extraction (SPE) to afford [(18)F]SiFB with an average preparative radiochemical yield (RCY) of 24±1% (non-decay corrected (NDC)) within a synthesis time of 30 min. The [(18)F]SiFB produced by automated synthesis was then used for the (18)F-labeling of rat serum albumin (RSA) as a proof of applicability.

Enhanced Nucleophilic Fluorination and Radiofluorination of Organosilanes Appended with Potassium-Chelating Leaving Groups

Here we aimed to explore the feasibility of enhancing the fluorination of organosilanes by appending potassium-chelating groups to the substrates. For this purpose, eight organosilanes were prepared in which a linear or cyclic leaving group, with putative potassium-chelating ability, was attached covalently to a congested silicon atom via an ether linkage to serve as a potential nucleophilic assisting leaving group (NALG). Organosilicon-NALGs with expected strong potassium-chelating capability enhanced reactions with potassium fluoride in acetonitrile to produce organofluorosilanes without any need to separately add phase transfer reagent. Similar rate enhancements were also observed with cyclotron-produced [¹⁸F]fluoride ion (t_1/2 = 109.7 min, β⁺ = 97%) in the presence of potassium carbonate in MeCN-0.5% H₂O. This study found that metal-chelating NALG units can accelerate fluorination and radiofluorination reactions at sterically crowded silicon atoms.

Application of [18F]FDG in radiolabeling reactions using microfluidic technology

Radiolabeling of peptides with the short-lived positron emitter fluorine-18 is usually a challenging endeavour. Conventional radiolabeling reactions mostly require fairly large amounts of peptides as labeling precursors, and extensive synthesis times. Intrinsic advantages of microfluidic technology permit to overcome these hurdles. Herein, we describe how microfluidic technology combined with [(18)F]FDG as readily available PET radiotracer allows for fast and high yielding radiolabeling reactions of peptides with fluorine-18.

Imaging integrin alpha-v-beta-3 expression in tumors with an 18F-labeled dimeric RGD peptide

Integrin αv β3 receptors are expressed on activated endothelial cells during neovascularization to maintain tumor growth. Many radiolabeled probes utilize the tight and specific association between the arginine-glycine-aspartatic acid (RGD) peptide and integrin αv β3 , but one main obstacle for any clinical application of these probes is the laborious multistep radiosynthesis of (18)F. In this study, the dimeric RGD peptide, E-[c(RGDfK)]2, was conjugated with NODAGA and radiolabeled with (18)F in a simple one-pot process with a radiolabeling yield of 20%, the whole process lasting only 45 min. NODAGA-E-[c(RGDfK)]2 labeled with (18)F at a specific activity of 1.8 MBq nmol(-1) and a radiochemical purity of 100% could be achieved. The logP value of (18)F-labeled NODAGA-E-[c(RGDfK)]2 was -4.26 ± 0.02. In biodistribution studies, (18)F-NODAGA-E-[c(RGDfK)]2 cleared rapidly from the blood with 0.03 ± 0.01 percentage injected dose per gram (%ID g(-1)) in the blood at 2 h p.i., mainly via the kidneys, and showed good in vivo stability. Tumor uptake of (18)F-NODAGA-E-[c(RGDfK)]2 (3.44 ± 0.20 %ID g(-1), 2 h p.i.) was significantly lower than that of reference compounds (68) Ga-labeled NODAGA-E-[c(RGDfK)]2 (6.26 ± 0.76 %ID g(-1) ; p <0.001) and (111) In-labeled NODAGA-E-[c(RGDfK)]2 (4.99 ± 0.64 %ID g(-1) ; p < 0.01). Co-injection of an excess of unlabeled NODAGA-E-[c(RGDfK)]2 along with (18)F-NODAGA-E-[c(RGDfK)]2 resulted in significantly reduced radioactivity concentrations in the tumor (0.85 ± 0.13 %ID g(-1)). The αv β3 integrin-expressing SK-RC-52 tumor could be successfully visualized by microPET with (18)F-labeled NODAGA-E-[c(RGDfK)]2 . In conclusion, NODAGA-E-[c(RGDfK)]2 could be labeled rapidly with (18)F using a direct aqueous, one-pot method and it accumulated specifically in αv β3 integrin-expressing SK-RC-52 tumors, allowing for visualization by microPET.

Studies toward the development of new silicon-containing building blocks for the direct (18)F-labeling of peptides

Silicon-containing prosthetic groups have been conjugated to peptides to allow for a single-step labeling with (18)F radioisotope. The fairly lipophilic di-tert-butylphenylsilane building block contributes unfavorably to the pharmacokinetic profile of bombesin conjugates. In this article, theoretical and experimental studies toward the development of more hydrophilic silicon-based building blocks are presented. Density functional theory calculations were used to predict the hydrolytic stability of di-tert-butylfluorosilanes 2-23 with the aim to improve the in vivo properties of (18)F-labeled silicon-containing biomolecules. As a further step toward improving the pharmacokinetic profile, hydrophilic linkers were introduced between the lipophilic di-tert-butylphenylsilane building block and the bombesin congeners. Increased tumor uptake was shown with two of these peptides in xenograft-bearing mice using positron emission tomography and biodistribution studies. The introduction of a hydrophilic linker is thus a viable approach to improve the tumor uptake of (18)F-labeled silicon-bombesin conjugates.

Development of a new thiol site-specific prosthetic group and its conjugation with [Cys(40)]-exendin-4 for in vivo targeting of insulinomas

A new tracer, N-5-[(18)F]fluoropentylmaleimide ([(18)F]FPenM), for site-specific labeling of free thiol group in proteins and peptides was developed. The tracer was synthesized in three steps ((18)F displacement of the aliphatic tosylate, di-Boc removal by TFA to expose free amine, and incorporation of the free amine into a maleimide). The radiosynthesis was completed in 110 min with 11-17% radiochemical yield (uncorrected), and specific activity of 20-49 GBq/μmol. [(18)F]FPenM showed comparable labeling efficiency with N-[2-(4-[(18)F]fluorobenzamido)ethyl]maleimide ([(18)F]FBEM). Its application was demonstrated by conjugation with glucagon-like peptide type 1 (GLP-1) analogue [cys(40)]-exendin-4. The cell uptake, binding affinity, imaging properties, biodistribution, and metabolic stability of the radiolabeled [(18)F]FPenM-[cys(40)]-exendin-4 were studied using INS-1 tumor cells and INS-1 xenograft model. Positron emission tomography (PET) results showed that the new thiol-specific tracer, [(18)F]FPenM-[cys(40)]-exendin-4, had high tumor uptake (20.32 ± 4.36%ID/g at 60 min postinjection) and rapid liver and kidney clearance, which was comparable to the imaging results with [(18)F]FBEM-[cys(40)]-exendin-4 reported by our group.

Synthesis of new 18F-radiolabeled silicon-based nitroimidazole compounds

The syntheses of new nitroimidazole compounds using silicon-[(18)F]fluorine chemistry for the potential detection of tumor hypoxia are described. [(18)F]silicon-based compounds were synthesized by coupling 2-nitroimidazole with silyldinaphtyl or silylphenyldi-tert-butyl groups and labeled by fluorolysis or isotopic exchange. Dinaphtyl compounds (6, 10) were labeled in 56-71% yield with a specific activity of 45 GBq/μmol, however these compounds ([(18)F]7 and [(18)F]11) were not stable in plasma. Phenyldi-tert-butyl compounds were labeled in 70% yield with a specific activity of 3 GBq/μmol by isotopic exchange, or in 81% yield by fluorolysis of siloxanes with a specific activity of 45 GBq/μmol. The labeled compound [(18)F]18 was stable in plasma and excreted by the liver and kidneys in vivo. In conclusion, the fluorosilylphenyldi-tert-butyl (SiFA) group is more stable in plasma than fluorosilyldiphenyl moiety. Thus, compound [(18)F]18 is suitable for further in vivo assessments.

Sulfonyl fluoride-based prosthetic compounds as potential 18F labelling agents

Nucleophilic incorporation of [(18)F]F(-) under aqueous conditions holds several advantages in radiopharmaceutical development, especially with the advent of complex biological pharmacophores. Sulfonyl fluorides can be prepared in water at room temperature, yet they have not been assayed as a potential means to (18)F-labelled biomarkers for PET chemistry. We developed a general route to prepare bifunctional 4-formyl-, 3-formyl-, 4-maleimido- and 4-oxylalkynl-arylsulfonyl [(18)F]fluorides from their sulfonyl chloride analogues in 1:1 mixtures of acetonitrile, THF, or tBuOH and Cs[(18)F]F/Cs(2)CO(3(aq.)) in a reaction time of 15 min at room temperature. With the exception of 4-N-maleimide-benzenesulfonyl fluoride (3), pyridine could be used to simplify radiotracer purification by selectively degrading the precursor without significantly affecting observed yields. The addition of pyridine at the start of [(18)F]fluorination (1:1:0.8 tBuOH/Cs(2)CO(3(aq.))/pyridine) did not negatively affect yields of 3-formyl-2,4,6-trimethylbenzenesulfonyl [(18)F]fluoride (2) and dramatically improved the yields of 4-(prop-2-ynyloxy)benzenesulfonyl [(18)F]fluoride (4). The N-arylsulfonyl-4-dimethylaminopyridinium derivative of 4 (14) can be prepared and incorporates (18)F efficiently in solutions of 100 % aqueous Cs(2)CO(3) (10 mg mL(-1)). As proof-of-principle, [(18)F]2 was synthesised in a preparative fashion [88(±8) % decay corrected (n=6) from start-of-synthesis] and used to radioactively label an oxyamino-modified bombesin(6-14) analogue [35(±6) % decay corrected (n=4) from start-of-synthesis]. Total preparation time was 105-109 min from start-of-synthesis. Although the (18)F-peptide exhibited evidence of proteolytic defluorination and modification, our study is the first step in developing an aqueous, room temperature (18)F labelling strategy.