Ultrasensitive and Selective Colorimetric DNA Detection by Nicking Endonuclease Assisted Nanoparticle Amplification

Near-infrared DNA-AgNCs enzyme-free fluorescence biosensing for microRNA imaging in living cells based on self-replicating catalytic hairpin self-assembly

In this work, a fast signal amplification system mediated by self-replicating catalytic hairpin self-assembly (SCHA) was established for microRNA-155 using near-infrared DNA-Ag Nanoclusters (DNA-AgNCs) as fluorescence signal output. Among them, two fission target-like DNA sequences are merged into two hairpin DNA H1 and H2, and the AgNCs template sequence is designed at the sticky end of H1 and H2. The target can be recycled in the system to form a double-stranded DNA structure (H1-H2), which will detach the H1/H2-AgNCs from the surface of the polypyrrole nanoparticles (PPy NPs) and cause the near-infrared fluorescence signal of DNA-AgNCs to be restored. At this point, the two-split target-like DNA sequences will be reassembled to initiator DNA. The acquired replicas can also be recycled as a brand-new activation unit to initiate the SCHA response, resulting in rapid replication of the target/triggered DNA, accompanied by the generation of higher fluorescence signals. This autocatalytic signal amplification approach has been successfully applicable to fast signal amplification, enzyme-free and label-free for microRNA-155 assay in biological samples, and the detection limit (LOD) is 240 fM (S/N = 3). At the same time, this SCHA system can realize intracellular microRNA fluorescence imaging, which presents a promising approach to developing advanced molecular diagnostic tools.

Gold Nanoparticles in Serum and Milk and Their Effect for Label-Free Colorimetric Sensing of DNA

Label-free gold nanoparticle (AuNP)-based colorimetric biosensors have been widely used for the detection of DNA. However, the effect of the biological sample matrix has not been fully explored. In this work, we investigated the salt-induced aggregation of AuNPs as well as DNA adsorption in serum and milk. AuNPs of 13, 30, and 50 nm were used as probes. The detection was successful only in a clean buffer but failed in serum or milk. Serum and milk exhibited excellent protective properties, even 250 mM NaCl added did not induce the aggregation of AuNPs. After centrifugation of milk, the supernatant did not protect the AuNPs, whereas the redispersed pellet showed protection. The limit concentration of serum to prevent AuNPs from aggregating was 0.04% for 13 nm AuNPs and 0.01% serum for 50 nm AuNPs. In addition, serum reduced DNA adsorption, and the DNA was adsorbed to the protein corona instead of directly to the AuNP surface. These two factors can explain the difficulty of detection in protein-containing samples. This study articulates the adsorption of proteins by AuNPs in biological samples and offers useful insights into the biosensor design.

Signal amplified colorimetric nucleic acid detection based on autocatalytic hairpin assembly

Herein, a nucleic acid assay based on autocatalytic hairpin assembly (ACHA) was proposed. In this system, two split G-quadruplex sequences were integrated into H1 and H2, respectively. And a DNA strand with the same sequence to target DNA was integrated into the assistant hairpin H3. In the presence of target DNA, the hairpin structure of H1 was opened and catalytic hairpin assembly (CHA) was activated, and then a series of DNA assembly steps based on the toehold-mediated DNA strand displacement were triggered and the product H1-H2 with sticky ends on both sides was formed. On the one side of H1-H2, the split two G-quadruplex sequences were close enough to form the intact G-quadruplex for the signal readout. At the same time, two sticky ends on the other side of H1-H2 hybridized with H3 and a new sticky end with the sequence same to the target DNA was exposed, which can immediately trigger the autocatalytic hairpin assembly reaction, and then the reaction rate of CHA was effectively accelerated and the colorimetric signal was significantly amplified. This ACHA signal amplified strategy has been successfully applied for the rapid and colorimetric nucleic acid detection.

Silica Nanowires-Filled Glass Microporous Sensor for the Ultrasensitive Detection of Deoxyribonucleic Acid

DNA carries genetic information and can serve as an important biomarker for the early diagnosis and assessment of the disease prognosis. Here, we propose a bottom-up assembly method for a silica nanowire-filled glass microporous (SiNWs@GMP) sensor and develop a universal sensing platform for the ultrasensitive and specific detection of DNA. The three-dimensional network structure formed by SiNWs provides them with highly abundant and accessible binding sites, allowing for the immobilization of a large amount of capture probe DNA, thereby enabling more target DNA to hybridize with the capture probe DNA to improve detection performance. Therefore, the SiNWs@GMP sensor achieves ultrasensitive detection of target DNA. In the detection range of 1 aM to 100 fM, there is a good linear relationship between the decrease rate of current signal and the concentration of target DNA, and the detection limit is as low as 1 aM. The developed SiNWs@GMP sensor can distinguish target DNA sequences that are 1-, 3-, and 5-mismatched, and specifically recognize target DNA from complex mixed solution. Furthermore, based on this excellent selectivity and specificity, we validate the universality of this sensing strategy by detecting DNA (H1N1 and H5N1) sequences associated with the avian influenza virus. By replacing the types of nucleic acid aptamers, it is expected to achieve a wide range and low detection limit sensitive detection of various biological molecules. The results indicate that the developed universal sensing platform has ultrahigh sensitivity, excellent selectivity, stability, and acceptable reproducibility, demonstrating its potential application in DNA bioanalysis.

A designed DNA/amino acid amphiphile-based supramolecular oxidase-mimetic catalyst for colorimetric DNA detection

DNA is self-assembled with Fmoc-amino acids and Cu2+ to construct a supramolecular catechol oxidase-mimetic catalyst, which exhibits remarkable activity in catalyzing colorimetric reactions. This catalytic system is used for the detection of DNA hybridization with a high selectivity and a low detection limit.

Recent Progress and Challenges on the Microfluidic Assay of Pathogenic Bacteria Using Biosensor Technology

Microfluidic technology is one of the new technologies that has been able to take advantage of the specific properties of micro and nanoliters, and by reducing the costs and duration of tests, it has been widely used in research and treatment in biology and medicine. Different materials are often processed into miniaturized chips containing channels and chambers within the microscale range. This review (containing 117 references) demonstrates the significance and application of nanofluidic biosensing of various pathogenic bacteria. The microfluidic application devices integrated with bioreceptors and advanced nanomaterials, including hyperbranched nano-polymers, carbon-based nanomaterials, hydrogels, and noble metal, was also investigated. In the present review, microfluid methods for the sensitive and selective recognition of photogenic bacteria in various biological matrices are surveyed. Further, the advantages and limitations of recognition methods on the performance and efficiency of microfluidic-based biosensing of photogenic bacteria are critically investigated. Finally, the future perspectives, research opportunities, potential, and prospects on the diagnosis of disease related to pathogenic bacteria based on microfluidic analysis of photogenic bacteria are provided.

Luminescence Nanomaterials for Biosensing Applications

Due to their capabilities of immobilizing more bioreceptor parts with reduced volumes, nanomaterials have emerged as potential tools for increasing sensitivity to specific molecules. Furthermore, carbon nanotube, gold nanoparticles, polymer nanoparticles, semiconductor quantum dots, graphene, nano-diamonds and graphene are among the nanomaterials that are under investigation. Due to the fast development of such a field of research, review summarises the classification of biosensors using main receptors, and designing biosensors. Numerous studies have concentrated on the manipulation of Persistent luminescence nanoparticles (PLNPs) in biosensing, cell tracking, bioimaging, and cancer therapy due to the effective removal of the autofluorescence interferences from tissues and the ultra-long near-infrared afterglow emission. As luminescence has a unique optical property, it can be detected without constant external illumination, preventing autofluorescence and light dispersion through tissues. These successes sparked an increasing curiosity in creating novel PLNP kinds with desired superior properties and multiple purposes. In this review, we emphasize the most recent developments in biosensing, imaging, and image-guided therapy while summarizing the research on synthesis methods, bio applications, bio membrane modification and bio-safety of PLNPs. Finally, the remaining issues and difficulties are examined together with prospective future developments in the field of biomedical applications.

Mild Acidosis-Directed Signal Amplification in Tumor Microenvironment via Spatioselective Recruitment of DNA Amplifiers

DNA biotechnology offers intriguing opportunities for amplification-based sensitive detection. However, spatiotemporally-controlled manipulation of signal amplification for in situ imaging of the tumor microenvironment remains an outstanding challenge. Here, we demonstrate a DNA-based strategy that can spatial-selectively amplify the acidic signal in the extracellular milieu of the tumor to achieve specific imaging with improved sensitivity. The strategy, termed mild acidosis-targeted amplification (MAT-amp), leverages the specific acidic microenvironment to engineer tumor cells with artificial DNA receptors through a pH (low) insertion peptide, which permits controlled recruitment of fluorescent amplifiers via a hybridization chain reaction. The acidosis-responsive amplification cascade enables significant fluorescence enhancement in tumors with a reduced background signal in normal tissues, leading to improved signal-to-background ratio. These results highlight the utility of MAT-amp for in situ imaging of the microenvironment characterized by pH disequilibrium.

Application of Nanomaterials in Isothermal Nucleic Acid Amplification

Because of high sensitivity and specificity, isothermal nucleic acid amplification are widely applied in many fields. To facilitate and improve their performance, various nanomaterials, like nanoparticles, nanowires, nanosheets, nanotubes, and nanoporous films are introduced in isothermal nucleic acid amplification. However, the specific application, roles, and prospect of nanomaterials in isothermal nucleic acid amplification have not been comprehensively reviewed. Here, the application of different nanomaterials (0D, 1D, 2D, and 3D) in isothermal nucleic acid amplification is comprehensively discussed and recent progress in the field is summarized. The nanomaterials are mainly used for reaction enhancer, signal generation/amplification, or surface loading carriers. In addition, 3D nanomaterials can be also functioned as isolated chambers for digital nucleic acid amplification and the tools for DNA sequencing of amplified products. Challenges and future recommendations are also proposed to be better used for recent covid-19 detection, point-of-care diagnostic, food safety, and other fields.

Optical bio-sensing of DNA methylation analysis: an overview of recent progress and future prospects

DNA methylation as one of the most important epigenetic modifications has a critical role in regulating gene expression and drug resistance in treating diseases such as cancer. Therefore, the detection of DNA methylation in the early stages of cancer plays an essential role in disease diagnosis. The majority of routine methods to detect DNA methylation are very tedious and costly. Therefore, designing easy and sensitive methods to detect DNA methylation directly and without the need for molecular methods is a hot topic issue in bioscience. Here we provide an overview on the optical biosensors (including fluorescence, FRET, SERs, colorimetric) that have been applied to detect the DNA methylation. In addition, various types of labeled and label-free reactions along with the application of molecular methods and optical biosensors have been surveyed. Also, the effect of nanomaterials on the sensitivity of detection methods is discussed. Furthermore, a comprehensive overview of the advantages and disadvantages of each method are provided. Finally, the use of microfluidic devices in the evaluation of DNA methylation and DNA damage analysis based on smartphone detection has been discussed.

Here, we provide an overview on the optical biosensors (including fluorescence, FRET, SERs, colorimetric) that have been applied to detect the DNA methylation.

Recent advances in the exonuclease III-assisted target signal amplification strategy for nucleic acid detection

The detection of nucleic acids has become significantly important in molecular diagnostics, gene therapy, mutation analysis, forensic investigations and biomedical development, and so on. In recent years, exonuclease III (Exo III) as an enzyme in the 3'-5' exonuclease family has evolved as a frequently used technique for signal amplification of low level DNA target detection. Different from the traditional target amplification strategies, the Exo III-assisted amplification strategy has been used for target DNA detection through directly amplifying the amounts of signal reagents. The Exo III-assisted amplification strategy has its unique advantages and characters, because the character of non-specific recognition of Exo III can overcome the limitation of a target-to-probe ratio of 1 : 1 in the traditional nucleic acid hybridization assay and acquire higher sensitivity. In this review, we selectively discuss the recent advances in the Exo III-assisted amplification strategy, including the amplification strategy integrated with nanomaterials, biosensors, hairpin probes and other nucleic acid detection methods. We also discuss the strengths and limitations of each strategy and methods to overcome the limitations.

Integrating multiple hybridization chain reactions on gold nanoparticle and alkaline phosphatase-mediated in situ growth of gold nanobipyramids: An ultrasensitive and high color resolution colorimetric method to detect the mecA gene of Staphylococcus aureus

Colorimetry has been considered as a potential instrument-free platform for point-of-care genomic detection. However, it is limited by the poor sensitivity and low color resolution. Herein, we report a high-resolution colorimetric biosensor based on multiple hybridization chain reactions (HCRs) on gold nanoparticle (AuNP) and alkaline phosphatase (ALP)-mediated in situ growth of gold nanobipyramids (AuNBPs) for ultrasensitive detection of the Staphylococcus aureus (S. aureus) mecA gene. In our design, target DNA is hybridized with capture hairpin DNA on magnetic beads and then amplified by multiple HCRs on AuNP. Since biotin-labeled hairpin-structured nucleic acids are utilized to conduct HCRs, together with the large specific surface area of AuNP, the biotin- and streptavidin- based reaction results in a large amount of ALP on AuNP. With the aid of NADPH, ALP-mediated in situ growth of AuNBPs is observed, and a series of rainbow-like colors are associated with different target DNA concentrations. Through the multiple-amplification strategy produced by AuNP, HCRs, and enzymatic reactions, the target DNA as low as 2.71 pM can be detected with high specificity. Moreover, this method has been successfully applied to detect the mecA gene extracted from S. aureus. Therefore, the proposed method holds great potential in clinical diagnosis.

MutS protein-based fiber optic particle plasmon resonance biosensor for detecting single nucleotide polymorphisms

A new biosensing method is presented to detect gene mutation by integrating the MutS protein from bacteria with a fiber optic particle plasmon resonance (FOPPR) sensing system. In this method, the MutS protein is conjugated with gold nanoparticles (AuNPs) deposited on an optical fiber core surface. The target double-stranded DNA containing an A and C mismatched base pair in a sample can be captured by the MutS protein, causing increased absorption of green light launching into the fiber and hence a decrease in transmitted light intensity through the fiber. As the signal change is enhanced through consecutive total internal reflections along the fiber, the limit of detection for an AC mismatch heteroduplex DNA can be as low as 0.49 nM. Because a microfluidic chip is used to contain the optical fiber, the narrow channel width allows an analysis time as short as 15 min. Furthermore, the label-free and real-time nature of the FOPPR sensing system enables determination of binding affinity and kinetics between MutS and single-base mismatched DNA. The method has been validated using a heterozygous PCR sample from a patient to determine the allelic fraction. The obtained allelic fraction of 0.474 reasonably agrees with the expected allelic fraction of 0.5. Therefore, the MutS-functionalized FOPPR sensor may potentially provide a convenient quantitative tool to detect single nucleotide polymorphisms in biological samples with a short analysis time at the point-of-care sites.

Dynamic light scattering and fluorescence dual-signal sensing of cancer antigen-125 via recognition of the polymerase chain reaction product with gold nanoparticle probe

Cancer antigen 125 (CA - 125) is an important biomarker for the diagnosis of ovarian cancer. In this paper, oligonucleotide 5'-GACAGGCCCGAAGGAATAGATAATACGACTCACTATAGGGAGACAAGAATAAACGCTCAA-3' (oligo 1) contains an aptamer of CA - 125, and was designed partly complementary to oligonucleotide 5'-CTCTCTCTCCACCTTCTTCTTTGAGCGTTTATTCTTGTCT-3' (oligo 2). Oligo 1 · oligo 2 was extended with the Klenow fragment (exo^-) polymerase for further polymerase chain reaction (PCR) processes in the presence of two primers: deoxyribose nucleoside triphosphate and Taq polymerase. Single-stranded DNA was produced at two sides of the PCR product by introducing a C₁₈ spacer into the two primers, which could hybridize with AuNPs-DNA probes, investigated by dynamic light scattering and fluorescence. The addition of CA - 125 can interrupt the hybridization between oligo 1 and oligo 2, causing the average diameter of AuNPs-DNA probes to decrease with the increase of CA-125 within the range of 5 fg mL^-1 - 50 ng mL^-1. The linear regression equation of this relationship was D = 430.48-49.60 log₁₀C, with a detection limit of 1.1 fg mL^-1. Fluorescein molecules were modified at the end of the forward primer. The fluorescence intensity of the PCR product can be measured simultaneously, with the fluorescence intensity increasing linearly with the logarithm of CA-125 concentration within a linear range from 10 fg mL^-1 to 50 ng mL^-1, with a detection limit of 1.5 fg mL^-1.

Recent Advances in Aptamer Sensors

Recently, aptamers have attracted attention in the biosensing field as signal recognition elements because of their high binding affinity toward specific targets such as proteins, cells, small molecules, and even metal ions, antibodies for which are difficult to obtain. Aptamers are single oligonucleotides generated by in vitro selection mechanisms via the systematic evolution of ligand exponential enrichment (SELEX) process. In addition to their high binding affinity, aptamers can be easily functionalized and engineered, providing several signaling modes such as colorimetric, fluorometric, and electrochemical, in what are known as aptasensors. In this review, recent advances in aptasensors as powerful biosensor probes that could be used in different fields, including environmental monitoring, clinical diagnosis, and drug monitoring, are described. Advances in aptamer-based colorimetric, fluorometric, and electrochemical aptasensing with their advantages and disadvantages are summarized and critically discussed. Additionally, future prospects are pointed out to facilitate the development of aptasensor technology for different targets.

Universal DNA detection realized by peptide based carbon nanotube biosensors

Although DNA recognition has been achieved using numerous biosensors with various sensing probes, the utilization of bio-interaction between DNA and biomolecules has seldom been reported in universal DNA detection. Peptides as natural molecules have the unique ability to bind to universal DNA and excellent selectivity for DNA after being functionalized with specific groups. In this work, we report a peptide based carbon nanotube (CNT) thin-film-transistor (TFT) biosensor, which can achieve sensitive sequence-independent DNA detection. In the presence of DNA, a significant increase of ΔIon could be observed within 5 minutes, which was considered to be due to the electrostatic adsorption between the DNA and peptide of opposite zeta potential. With the gradual increase of the concentration of DNA, the ΔIon signals agree with the Hill-Langmuir model (R 2 = 0.98), indicating a negatively cooperative interaction between the peptide and DNA (the Hill coefficient n < 1). Compared with the former reported universal DNA bio-detector and NanoDrop (a spectrometer from Thermo Scientific™), this unique peptide based CNT-DNA sensor demonstrated a broader sensing range from nearly 1.6 × 10-4 to 5 μmol L-1 and a much lower detection limit of approximately 0.88 μg L-1. For the quantification of cDNA from T47D cancer cells, this unique peptide based CNT sensor could achieve efficient cDNA detection. To the best of our knowledge, this is the first report on the utilization of a peptide as a sensing element in the design of CNT based DNA biosensors, which enables highly efficient universal DNA detection.

Metallic Nanoparticle-Based Optical Cell Chip for Nondestructive Monitoring of Intra/Extracellular Signals

The biosensing platform is noteworthy for high sensitivity and precise detection of target analytes, which are related to the status of cells or specific diseases. The modification of the transducers with metallic nanoparticles (MNPs) has attracted attention owing to excellent features such as improved sensitivity and selectivity. Moreover, the incorporation of MNPs into biosensing systems may increase the speed and the capability of the biosensors. In this review, we introduce the current progress of the developed cell-based biosensors, cell chip, based on the unique physiochemical features of MNPs. Mainly, we focus on optical intra/extracellular biosensing methods, including fluorescence, localized surface plasmon resonance (LSPR), and surface-enhanced Raman spectroscopy (SERS) based on the coupling of MNPs. We believe that the topics discussed here are useful and able to provide a guideline in the development of new MNP-based cell chip platforms for pharmaceutical applications such as drug screening and toxicological tests in the near future.

Using gold nanoparticles to detect single-nucleotide polymorphisms: toward liquid biopsy

The possibility of detecting genetic mutations rapidly in physiological media through liquid biopsy has attracted the attention within the materials science community. The physical properties of nanoparticles combined with robust transduction methods ensure an improved sensitivity and specificity of a given assay and its implementation into point-of-care devices for common use. Covering the last twenty years, this review gives an overview of the state-of-the-art of the research on the use of gold nanoparticles in the development of colorimetric biosensors for the detection of single-nucleotide polymorphism as cancer biomarker. We discuss the main mechanisms of the assays that either are assisted by DNA-based molecular machines or by enzymatic reactions, summarize their performance and provide an outlook towards future developments.

Biosensors for epigenetic biomarkers detection: A review

Epigenetic inheritance is a heritable change in gene function independent of alterations in nucleotide sequence. It regulates the normal cellular activities of the organisms by affecting gene expression and transcription, and its abnormal expression may lead to the developmental disorder, senile dementia, and carcinogenesis progression. Thus, epigenetic inheritance is recognized as an important biomarker, and the accurate quantification of epigenetic inheritance is crucial to clinical diagnosis, drug development and cancer treatment. Noncoding RNA, DNA methylation and histone modification are the most common epigenetic biomarkers. The conventional biosensors (e.g., northern blotting, radiometric, mass spectrometry and immunosorbent biosensors) for epigenetic biomarkers assay usually suffer from hazardous radiation, complicated manipulation, and time-consuming procedures. To facilitate the practical applications, some new biosensors including colorimetric, luminescent, Raman scattering spectroscopy, electrochemical and fluorescent biosensors have been developed for the detection of epigenetic biomarkers with simplicity, rapidity, high throughput and high sensitivity. In this review, we summarize the recent advances in epigenetic biomarkers assay. We classify the biosensors into the direct amplification-free and the nucleotide amplification-assisted ones, and describe the principles of various biosensors, and further compare their performance for epigenetic biomarkers detection. Moreover, we discuss the emerging trends and challenges in the future development of epigenetic biomarkers biosensors.

Systematic Probing of the Sequence Selectivity of Exonuclease III with a Photosensitization Colorimetric Assay

Exonuclease III (Exo III) is an important enzymatic tool that is being widely used in molecular biology, biotechnology, and bioassay development. Exo III prefers to cleave double-stranded DNA (dsDNA) with blunt and recessed 3'-termini rather than their protruding counterpart. While it has been accepted that a short 3'-overhang (e.g., >4 nt) is necessary to protect a dsDNA from Exo III cleavage, critical roles of the length and sequence of this 3'-overhang remain unexplored. Herein, we develop a novel light-induced colorimetric assay allowing the systematic probe of the sequence selectivity of Exo III in a rapid and high-throughput manner. Our finding that Exo III is highly specific to 3'-overhang in terms of both length and sequence will be valuable for guiding the design of bioassays and DNA manipulating tools mediated by Exo III.

RNA imaging by chemical probes

Sequence-specific detection of intracellular RNA is one of the most important approaches to understand life phenomena. However, it is difficult to detect RNA in living cells because of its variety and scarcity. In the last three decades, several chemical probes have been developed for RNA detection in living cells. These probes are composed of DNA or artificial nucleic acid and hybridize with the target RNA in a sequence-specific manner. This hybridization triggers a change of fluorescence or a chemical reaction. In this review, we classify the probes according to the associated fluorogenic mechanism, that is, interaction between fluorophore and quencher, environmental change of fluorophore, and template reaction with/without ligation. In addition, we introduce examples of RNA imaging in living cells.

Colorimetric detection of single base-pair mismatches based on the interactions of PNA and PNA/DNA complexes with unmodified gold nanoparticles

Rapid and sensitive single nucleotide polymorphisms (SNPs) genotyping is of particular important for early diagnosis, prevention, and treatment of specific human diseases. A simple and low-cost SNP detection method would be valuable for routine analysis in resource-limited settings. Here, we demonstrated a novel and convenient gold nanoparticle (AuNPs) based colorimetric approach for efficient screening of SNPs at room temperature without instrumentation. SNP detection is performed in a single tube with one set of unmodified AuNPs, a label-free peptide nucleic acid (PNA) probe, a single exonuclease (S1 nuclease), and the target to be tested. S1 nuclease could digest DNAs in DNA/PNA duplexes involving a mismatch into small fragments, while DNAs in the fully-matched DNA/PNA duplexes can be effectively protected by PNA from enzymatic degradation. This difference could be easily discriminated by color changes associated with gold aggregation. PNA oligomers can induce immediate AuNP aggregation even in the presence of nucleoside monophosphates (dNMPs), the digestion products of DNA. Whereas PNA/DNA duplexes can effectively stabilize unmodified AuNPs, and the stabilization effect of PNA/DNA is better than single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). Without the need of precise temperature control and extra salt addition, SNPs are detected with a detection limit of 2.3 nM in cell lysate. Moreover, this system can effectively discriminate a range of different mismatches even in spiked cell lysate, demonstrate the potential use of this biosensor for biological samples.

Advances in DNA/RNA detection using nanotechnology

Specific nucleic acid detection in vitro or in vivo has become increasingly important in the discovery of genetic diseases, diagnosing pathogen infection and monitoring disease treatment. One challenge, however, is that the amount of target nucleic acid in specimens is limited. Furthermore, direct sensing methods are also unable to provide sufficient sensitivity and specificity. Fortunately, due to advances in nanotechnology and nanomaterials, nanotechnology-based bioassays have emerged as powerful and promising approaches providing ultra-high sensitivity and specificity in nucleic acid detection. This chapter presents an overview of strategies used in the development and integration of nanotechnology for nucleic acid detection, including optical and electrical detection methods, and nucleic acid assistant recycling amplification strategies. Recent 5 years representative examples are reviewed to demonstrate the proof-of-concept with promising applications for DNA/RNA detection and the underlying mechanism for detection of DNA/RNA with the higher sensitivity and selectivity. Furthermore, a brief discussion of common unresolved issues and future trends in this field is provided both from fundamental and practical point of view.

Transcription immunoassay: light-up RNA aptamer-based immunoassay using in vitro transcription

Here, we present an ultra-enhanced immunoassay for sensitive and reliable biomarker detection using layer-by-layer assembly and transcription-assisted light-up aptamer generation to induce signal amplification. This dendrimer structure-based transcription immunoassay is ∼1500 times more sensitive than commercial fluorescence ELISA, achieving a detection limit of 108 aM.

Microfluidic paper-based photoelectrochemical sensing platform with electron-transfer tunneling distance regulation strategy for thrombin detection

This work reports a microfluidic paper-based photoelectrochemical (μ-PEC) sensing platform for thrombin (TB) detection with electron-transfer tunneling distance regulation (ETTDR) and aptamer target-triggering nicking enzyme signaling amplification (NESA) dual strategies. Specifically, paper-based TiO₂ nanosheets (PTNs) were prepared with an efficient hydrothermal process, serving as the direct pathway for the charge carriers transfer. When CeO₂-labeled hairpin DNA 3 (HP3) was closely located at the PTNs, the CeO₂-PTNs heterostructure was formed, which could great facilitate the photogenerated carries separation of CeO₂. In addition, with the aid of aptamer target-triggering NESA strategy, the input TB could be transducted to numerous output target of DNA (tDNA), achieving the goal of desirable signal amplification. In the presence of TB, the output tDNA could be further hybridized with HP3 and unfold its hairpin loop, which forced the CeO₂ away from the surface of PTNs and vanished the CeO₂-PTNs heterostructure, resulting in the obviously reducing of photocurrent signal. The as-designed sensing platform exhibited a linear range from 0.02 pM to 100 pM with a detection limit of 6.7 fM. Importantly, this μ-PEC sensing platform could not only realize the highly efficient TB detection, but also pave a luciferous way for the detection of other protein in bioanalysis.

Boron-Carbon-Nitride Sheet as a Novel Surface for Biological Applications: Insights from Density Functional Theory

Understanding the interaction between nanoscale materials and nucleobases is essential for their use in nanobiotechnology and nanomedicine. Our ab initio calculations indicate that the interaction of nucleobases [adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U)] with boron-carbon-nitride (BCN) is mainly governed by van der Waals interactions. The adsorption energies, ranging from -0.560 to -0.879 eV, decrease in the order of G > A > T > C > U, which can be attributed to π-π interactions and different side groups of the nucleobases. We found that anions (N and O atoms) of nucleobases prefer to stay on top of cation (B) of the substrate. The results also showed that BCN exhibits superior binding strength than graphene and boron-nitride-based materials. We also found that upon adsorption, the fundamental properties of BCN and nucleobases remains unaltered, which suggests that BCN is a promising template for self-assembly of nucleobases.

Dual-Mode Au Nanoprobe Based on Surface Enhancement Raman Scattering and Colorimetry for Sensitive Determination of Telomerase Activity Both in Cell Extracts and in the Urine of Patients

Telomerase is a valuable biomarker, which is highly correlated to cancer diseases. However, the single-mode probe for telomerase detection cannot satisfy the challenge of detection of telomerase activity rapidly, simply with high selectivity, sensitivity, and accuracy both in preliminary diagnosis and in point of care (POC) testing. Therefore, there is an urgent need to develop a robust approach with controllable assembly and high accuracy to consider both the simplification of preliminary diagnosis and POC testing and the quantification requirement for early clinical diagnosis and treatment. Herein, a novel dual-mode Au NPs probe was developed for determination of telomerase activity with controllable assembly and aggregation statement based on surface enhancement Raman scattering (SERS) and colorimetry. In this strategy, an Au dimer-based probe with high uniformity was assembled successfully, telomerase activity was reflected according to the color variations of solution and the Raman intensity of Raman reporter. Taking advantage of the uniformity of Au dimers and the combination of colorimetry and SERS techniques, our strategy determined the telomerase activity with high accuracy, sensitivity, and wide range. The established probe possessed of high selectivity, sensitivity, and accuracy, which was approved as a reliable, intuitional, and convenient approach for detecting telomerase activity.

Combining magnetic nanoparticle capture and poly-enzyme nanobead amplification for ultrasensitive detection and discrimination of DNA single nucleotide polymorphisms

The development of ultrasensitive methods for detecting specific genes and discriminating single nucleotide polymorphisms (SNPs) is important for biomedical research and clinical disease diagnosis. Herein, we report an ultrasensitive approach for label-free detection and discrimination of a full-match target-DNA from its cancer related SNPs by combining magnetic nanoparticle (MNP) capture and poly-enzyme nanobead signal amplification. It uses a MNP linked capture-DNA and a biotinylated signal-DNA to sandwich the target followed by ligation to offer high SNP discrimination: only the perfect-match target-DNA yields a covalently linked biotinylated signal-DNA on the MNP surface for subsequent binding to a neutravidin-horseradish peroxidase conjugate (NAV-HRP) for signal amplification. The use of polymer nanobeads each tagged with thousands of copies of HRPs greatly improves the signal amplification power, allowing for direct, amplification-free quantification of low aM target-DNA over 6 orders of magnitude (0.001-1000 fM). Moreover, this sensor also offers excellent discrimination between the perfect-match gene and its cancer-related SNPs and can positively detect 1 fM perfect-match target-DNA in the presence of 100 fold excess of co-existing single-base mismatch targets. Furthermore, it works robustly in clinically relevant media (e.g. 10% human serum) and gives even higher SNP discrimination than that in clean buffers. This ultrasensitive DNA sensor appears to have excellent potential for rapid detection and diagnosis of genetic diseases.

Colorimetric detection and typing of E. coli lipopolysaccharides based on a dual aptamer-functionalized gold nanoparticle probe

A rapid method for identification and typing of lipopolysaccharides (LPS) was developed by utilizing the different binding affinities between two kinds of gold nanoparticles (AuNPs) functionalized with two aptamers. Aptamers against ethanolamine and E. coli O111:B4 LPS were used to functionalize the AuNPs. The AuNPs functionalized with ethanolamine aptamer can bind to ethanolamine and are termed general probe (G-probe). The G-probe can recognize any type of LPS because ethanolamine is a component of every type of LPS. This causes a sandwich-mediated aggregation of the AuNPs and a color change from red to blue. The AuNPs functionalized with aptamer against the LPS of E. coli O111:B4 specifically bind to O111:B4 LPS and are termed specific probe (S-probe). By using these two probes, a logic typing method was developed. It can detect LPS in concentrations between 2.5 and 20 μg·mL^-1 and with a 1 μg·mL^-1 detection limit. In the authors' perception, the use of a dual aptamer-based colorimetric method has a large potential in terms of selective detection of microorganisms. Graphical abstract Two aptamer functionalized AuNP probes, G-probe and S-probe, were prepared for LPS typing and detecting. E. coli O111:B4 LPS was easily distinguished from O55:B5 LPS according to the signal output configurations (On & On Vs On & Off) of a general probe (G-probe) and a specific probe (S-probe).

Ultrasensitive detection of long non-coding RNAs based on duplex-specific nuclease-actuated cyclic enzymatic repairing-mediated signal amplification

We develop a new method for sensitive detection of long noncoding RNAs using duplex-specific nuclease-actuated cyclic enzymatic repairing-mediated signal amplification.

Double amplified colorimetric detection of DNA using gold nanoparticles, enzymes and a catalytic hairpin assembly

The authors describe an isothermal and ultrasensitive colorimetric DNA assay that consists of two amplification stages using enzymes and a catalytic hairpin assembly (CHA). The first step consists in the selective amplification of DNA using Klenow fragment and nicking enzyme. The second step consists in the amplification of the optical signal by using a catalytic hairpin assembly. After two amplification steps, the DNA reaction induces the aggregation of the red gold nanoparticles to give a blue color shift. The degree of aggregation can be quantified by measurement of the ratio of the UV-vis absorbances of the solutions at 620 and 524 nm which are the wavelengths of the aggregated gold nanoparticles and bare gold nanoparticles. The detection limit is as low as 3.1 fM. Due to the use of a specific enzyme, only the desired DNAs will be detected. The method can be applied to the determination of DNA of various lengths. Despite the presence of large amounts of wildtype DNA, it can readily detect a target DNA. Conceivably, the technique has a large potential because of its high sensitivity and selectivity. Graphical abstract Schematic presentation of DNA detection using gold nanoparticles (AuNP), enzymes and catalytic hairpin assembly (CHA). Effective DNA detection is achieved through the aggregation of AuNPs which is caused by DNA amplification using enzymes and signal amplification using CHA.

A universal DNAzyme-based bioluminescent sensor for label-free detection of biomolecules

We demonstrate for the first time the development of a universal DNAzyme-based bioluminescent sensor for label-free detection of various biomolecules including DNAzyme and DNA. The presence of DNAzyme may induce the cyclic cleavage of riboadenosine (rA)-containing substrates, and the subsequent digestion of the cleaved substrates by exonuclease III (Exo III) releases abundant AMPs to initiate cyclic AMP pyrophosphorylation-ATP depyrophosphorylation for the generation of an enhanced bioluminescence signal. This sensor can real-time monitor the DNAzyme activity with a detection limit of 3.16 × 10^-12 M. Moreover, the DNAzyme may be divided into two subunits for sensitive detection of target DNA. In the presence of target DNA, the two separated subunits may assemble into an active DNAzyme which can catalyze the cyclic cleavage of substrates and initiate the digestion of cleaved substrates by Exo III for the generation of an enhanced bioluminescence signal. This sensor can sensitively detect target DNA with a detection limit of 3.31 × 10^-12 M. Importantly, this bioluminescent sensor can achieve a zero-background signal, and its output signal originates from the release of AMP for the generation of self-illuminating light emission without the requirement of either the external labels or the reporting reagents.

Endonuclease IV recognizes single base mismatch on the eighth base 3' to the abasic site in DNA strands for ultra-selective and sensitive mutant-type DNA detection

Since single nucleotide polymorphism (SNP) is related with many diseases and drug metabolic polymorphous and SNP genotyping is rising rapidly in many biological and medical areas, various methods of discriminating SNPs have been developed, one of which is an enzyme-based method. We uncovered a unique property of endonuclease IV due to which it can discriminate single base mismatches in different positions of DNA strands containing an abasic site, and we also discovered a new property: a mismatch in the +8 position could inhibit the cleavage of endonuclease IV. Then, we coupled +8 mismatch with other mismatches along with the discrimination effect of melting temperature to develop a new ultra-selective and sensitive genotyping system, which showed high discrimination factors. The detection limit was as low as 0.05-0.01%. Our new discovery improves the understanding of endonuclease IV. Also, the method could be applied to clinical real samples; thus, it merits further investigation and improvement for application in clinical utilization for early screening of specific diseases.