Metal-catalyzed alpha-arylation of carbonyl and related molecules: novel trends in C-C bond formation by C-H bond functionalization

Visible-Light-Induced α-Arylation of Ketones with (Hetero)aryl Halides

An enamine-mediated photoredox catalyzed C(sp2)-C(sp3) cross-coupling of dual radical precursors for the arylation of ketone is presented in this Letter. These reactions led to the formation of an enamine by using pyrrolidine to functionalize the C(sp3)-H bond in ketone substrates, which could be smoothly converted to α-arylated ketones with inert aryl bromides and even aryl chlorides in moderate to good yields under mild reaction conditions. The photocatalytically induced C(sp2)-C(sp3) cross-coupling between unactivated noncyclic ketones and aryl halides was achieved, and multiple carbonyl α-arylated backbones containing various natural products and drug molecules were successfully constructed.

Dual-Catalytic Structural Isomerisation as a Route to α-Arylated Ketones

Isomerisation reactions provide streamlined routes to organic compounds which are otherwise hard to directly synthesise. The most common forms are positional, geometrical or stereochemical isomerisations which involve the relocation of a double bond or a change in relative location of groups in space. In contrast, far fewer examples of structural (or constitutional) isomerisation exist where the connectivity between atoms is altered. The development of platforms capable of such rearrangement poses a unique set of challenges because chemical bonds must be selectively cleaved, and new ones formed without overall addition or removal of atoms. Here, we show that a dual catalytic system can enable the structural isomerisation of readily available allylic alcohols into more challenging-to-synthesise α-arylated ketones via a H-atom transfer initiated semi-pinacol rearrangement. Key to our strategy is the combination of a cobalt catalyst and photocatalyst under reductive, protic conditions which allows intermediates to propagate catalytic turnover. By providing an unusual disconnection to structural motifs which are difficult to access through direct arylation, we anticipate inspiring other advanced catalytic isomerisation strategies that will further retrosynthetic logic for complex molecule synthesis.

Visible light-mediated radical addition cascade cyclization of aryl isocyanides with tricarbonyls: rapid access to substituted phenanthridines and isoquinolines

A visible light-mediated synthesis of substituted phenanthridines and isoquinolines from ortho-substituted aryl isocyanides and tricarbonyl compounds is unveiled via the radical addition cascade cyclization (RACC) strategy. This acid/base-free method involves an oxidant (a persulphate salt) and a Ru-photocatalyst. This protocol avoids the use of halogenated compounds as pre-functionalized carbonyl precursors. The products can be easily post-modified to other important small molecules. The functional group tolerance of the reaction and the yields of the products are good without any scalability issues. The mechanistic investigation suggested the presence of a radical pathway during the reaction.

Chemoselective deoxygenative α-arylation of carboxylic acids, amides, and esters: synthesis of anesthetic and anti-inflammatory compounds

A metal-free strategy has been developed for the α-arylation of carboxylic acids, secondary amides, and esters employing arenes as key reagents. This process entails the Lewis-acid catalyzed reductive Friedel-Crafts alkylation of arenes utilizing α-ketoacids, facilitated by silane in HFIP solvent. The transformation exhibits exceptional functional group tolerance, enabling late-stage functionalization of natural products. This one-step protocol has been successfully used to synthesize commercially available drugs, such as adiphenine, piperidolate, derivatives of ketoprofen, ibuprofen, flurbiprofen, and the pesticide bromopropylate.

Enantioselective Synthesis of α-Aryl Ketones by a Cobalt-Catalyzed Semipinacol Rearrangement

A highly enantioselective cobalt-catalyzed semipinacol rearrangement of symmetric α,α-diarylallylic alcohols is disclosed. A chiral cobalt-salen catalyst generates a highly electrophilic carbocation surrogate following hydrogen atom transfer and radical-polar crossover steps. This methodology provides access to enantioenriched α-aryl ketones through invertive displacement of a cobalt(IV) complex during 1,2-aryl migration. A combination of readily available reagents, silane and N-fluoropyridinium oxidant, are used to confer this type of reactivity. An exploration into the effect of aryl substitution revealed the reaction tolerates para- and meta-halogenated, mildly electron-rich and electron-poor aromatic rings with excellent enantioselectivities and yields. The yield of the rearrangement diminished with highly electron-rich aryl rings whereas very electron-deficient and ortho-substituted arenes led to poor enantiocontrol. A Hammett analysis demonstrated the migratory preference for electron-rich aromatic rings, which is consistent with the intermediacy of a phenonium cation.

Transition-Metal-Free Direct α-Arylation of Weinreb-type Amides with Arylboronic Acids through Aza-oxyallyl Cation Intermediates

Here, we report an efficient transition-metal-free C(sp2)-C(sp3) Suzuki-Miyaura-type cross-coupling between α-halo Weinreb-type amides and arylboronic acids. The reaction is carried out by capturing active aza-oxyallyl cation (AOAC) with arylboronic acid to form a boron "ate" complex, followed by 1,4-migration to give α-aryl amides with good yields.

P,N-Coordinating Ylide-Functionalized Phosphines (NYPhos): A Ligand Platform for the Selective Monoarylation of Small Nucleophiles

Palladium-catalyzed coupling reactions of small nucleophiles are of great interest, but challenging due to difficulties in selectivity control. Herein, we report the development of a new platform of P,N-ligands consisting of ylide-functionalized phosphines with aminophosphonium groups (NYPhos) to address this challenge. These phosphine ligands are easily accessible in a wide structural diversity with highly modular electronic and steric properties. Based on a family of 14 ligands the selective monoarylation of acetone as well as other challenging ketones and amides was accomplished with record-setting activities even for aryl chlorides at room temperature including late-stage functionalizations of drug molecules. Moreover, ammonia and other small primary amines could be coupled at mild conditions. Isolation and structure analyses of palladium complexes within the catalytic cycle confirmed that the P,N-coordination mode is necessary to achieve the observed selectivities. It also demonstrated the facile adjustability of the N-donor strength, which is beneficial for the targeted design of tailored P,N-ligands for future applications.

Synthesis of ɑ-Aryl-oxindoles via Grignard Reaction with Isatin in the Presence of Diphenyl Phosphite

A protocol has been developed for the synthesis of α-aryl-oxindoles from isatin and Grignard reagents in the presence of diphenyl phosphite for the first time. This reaction was conveniently carried out under mild conditions in a one-pot fashion with moderate to excellent yields.

Synthesis of deoxybenzoins from β-alkoxy styrenes and arylboronic acids via palladium-catalyzed regioselective Heck-arylation reactions

Palladium-catalyzed synthesis of deoxybenzoin derivatives from styryl ethers and arylboronic acids is reported. The reaction proceeds under mild conditions in the presence of TEMPO and provides the desired products in good to excellent yields. Simple operation, broad substrate scope, and functional group tolerance are the salient features of the developed methodology.

Divergent Transformations of Aromatic Esters: Decarbonylative Coupling, Ester Dance, Aryl Exchange, and Deoxygenative Coupling

ConspectusAromatic esters are cost-effective, versatile, and commonly used scaffolds that are readily synthesized or encountered as synthetic intermediates. While most conventional reactions involving these esters are nucleophilic acyl substitutions or 1,2-nucleophilic additions─where a nucleophile attacks the carbonyl group, decarbonylative transformations offer an alternative pathway by using the carbonyl group as a leaving group. This transition-metal-catalyzed process typically begins with oxidative addition of the C(acyl)-O bond to the metal. Subsequently, the reaction involves the migration of CO to the metal center, the reaction with a nucleophile, and reductive elimination to yield the final product. Pioneering work by Yamamoto on nickel complexes and the development of decarbonylative reactions (such as Mizoroki-Heck-type olefination) using aromatic carboxylic anhydrides catalyzed by palladium were conducted by de Vries and Stephan. Furthermore, reports have surfaced of decarbonylative hydrogenation of pyridyl methyl esters by Murai using ruthenium catalysts as well as Mizoroki-Heck-type reactions of nitro phenyl esters by Gooßen under palladium catalysis. Our group has been at the forefront of developing decarbonylative C-H arylations of phenyl esters with 1,3-azoles and aryl boronic acids using nickel catalysts. The key to this reaction is the use of phenyl esters, which are easy to synthesize, stabilize, and handle, allowing oxidative addition of the C(acyl)-O bond; nickel, which facilitates oxidative addition of the C(acyl)-O bond; and suitable bidentate phosphine ligands that can stabilize the intermediate. By modification of the nucleophiles, esters have been effectively utilized as electrophiles in cross-coupling reactions, encouraging the development of these nucleophiles among researchers. This Account summarizes our advancements in nucleophile development for decarbonylative coupling reactions, particularly highlighting the utilization of aromatic esters in diverse reactions such as alkenylation, intramolecular etherification, α-arylation of ketones, C-H arylation, methylation, and intramolecular C-H arylation for dibenzofuran synthesis, along with cyanation and reductive coupling. We also delve into reaction types that are distinct from typical decarbonylative reactions, including ester dance reactions, aromatic ring exchanges, and deoxygenative transformations, by focusing on the oxidative addition of the C(acyl)-O bond of the aromatic esters to the metal complex. For example, the ester dance reaction is hypothesized to undergo 1,2-translocation starting with oxidative addition to a palladium complex, leading to a sequence of ortho-deprotonation/decarbonylation, followed by protonation, carbonylation, and reductive elimination. The aromatic exchange reaction likely involves oxidative addition of complexes of different aryl electrophiles with a nickel complex. In deoxygenative coupling, an oxidative addition complex with palladium engages with a nucleophile, forming an acyl intermediate that undergoes reductive elimination in the presence of an appropriate reducing agent. These methodologies are poised to captivate the interest of synthetic chemists by offering unconventional and emerging approaches for transforming aromatic esters. Moreover, we demonstrated the potential to transform readily available basic chemicals into new compounds through organic synthesis.

Pd(II)-catalyzed cyclization of 2-methyl aromatic ketones with maleimides through weak chelation assisted dual C-H activation

A palladium-catalyzed dual C-H functionalization of substituted aromatic ketones and ester with maleimides leading to tricyclic heterocyclic molecules with good to excellent yield is reported. In this protocol, weak chelation of the carbonyl groups has been successfully utilized for the selective activation of the ortho-methyl C(sp3)-H bond instead of the ortho-C(sp2)-H bond in the presence of an external bidentate ligand Ac-Ile-OH. The reaction proceeds through two-fold C-H activation to generate a five-membered cyclic ring. The first C-H activation takes place selectively at the benzylic position followed by a second C-H bond activation at the meta position. The protocol demonstrates compatibility among diverse substituted aromatic ketones and ester as well as various substituted maleimides. Further derivatization of the tricyclic ketone to an alcohol exhibits the synthetic applicability of the protocol. Also, a plausible reaction mechanism has been proposed.

Iodoarene-directed photoredox β-C(sp3)-H arylation of 1-(o-iodoaryl)alkan-1-ones with cyanoarenes via halogen atom transfer and hydrogen atom transfer

Site selective functionalization of inert remote C(sp3)-H bonds to increase molecular complexity offers vital potential for chemical synthesis and new drug development, thus it has been attracting ongoing research interest. In particular, typical β-C(sp3)-H arylation methods using chelation-assisted metal catalysis or metal-catalyzed oxidative/photochemical in situ generated allyl C(sp3)-H bond processes have been well developed. However, radical-mediated direct β-C(sp3)-H arylation of carbonyls remains elusive. Herein, we describe an iodoarene-directed photoredox β-C(sp3)-H arylation of 1-(o-iodoaryl)alkan-1-ones with cyanoarenes via halogen atom transfer (XAT) and hydrogen atom transfer (HAT). The method involves diethylaminoethyl radical-mediated generation of an aryl radical intermediate via XAT, then directed 1,5-HAT to form the remote alkyl radical intermediate and radical-radical coupling with cyanoarenes, and is applicable to a broad scope of unactivated remote C(sp3)-H bonds like β-C(sp3)-H bonds of o-iodoaryl-substituted alkanones and α-C(sp3)-H bonds of o-iodoarylamides. Experimental findings are supported by computational studies (DFT calculations), revealing that this method operates via a radical-relay stepwise mechanism involving multiple SET, XAT, 1,5-HAT and radical-radical coupling processes.

Catalytic and Base-free Suzuki-type α-Arylation of Cyclic 1,3-Dicarbonyls via a Cyclic Iodonium Ylide Strategy

To date, it remains challenging to achieve a general and catalytic α-arylation of cyclic 1,3-dicarbonyls, particularly ubiquitous heteroaromatic ones. In most cases, the preparation of their medically significant arylated derivatives requires multistep synthetic sequences. Herein, we introduce a new, convenient strategy involving the conversion of cyclic 1,3-dicarbonyls to cyclic iodonium ylides (CIYs), followed by rhodium-catalyzed α-arylation with arylboronic reagents via carbene coupling. This approach is mild, operationally simple, base-free, biocompatible, and exhibits broad substrate scope (>100 examples), especially with respect to various heteroaromatic 1,3-dicarbonyls and ortho-substituted or base-sensitive arylboronic acids. Importantly, owing to the excellent compatibility with various arylboronic acids or boronate esters (ArBpin, ArBneop, or ArBF3K), this method allows the late-stage installation of heterocyclic 1,3-dicarbonyl motifs in highly complex settings. The utility of this transformation is further demonstrated through significantly simplifying the synthesis of several bioactive molecules and natural products.

Electrochemical aerobic Wacker-type oxygenation of triaryl substituted alkenes to 1,2,2-triarylethanones

An effective synthetic approach for various 1,2,2-triarylethanones from triaryl substituted alkenes has been developed via an electrochemical Wacker-type oxygenation with O2 as the sole oxygen source. It presents the first instance of the Wacker-type oxidation expanding its substrate scope to trisubstituted alkenes. The approach is transition-metal-free, compatible with various functional groups, and can be carried out under mild conditions resulting in satisfactory yields. Mechanistic experiments suggest the CO bond formation occurs through reactions between cationic carbon species and the superoxide radical, which involves the 1,2-shift of the electron-rich substituent.

Copper-Catalyzed α-Arylation of Nitroalkanes with (Hetero)aryl Bromides/Iodides

α-Aryl substituted nitroalkanes are valuable synthetic building blocks that can be easily converted into α-aryl substituted aldehydes, ketones, carboxylic acids, as well as amines. Herein, an efficient Cu/oxalamide-catalyzed coupling between nitroalkanes and (hetero)aryl halides (Br, I) was developed to direct access highly diverse α-aryl substituted nitroalkanes. Compared with the current state of art, this protocol is more environmentally friendly and practical for synthetic chemists. This approach is characterized by a broad substrate scope on both nitroalkane part (primary nitroalkanes and nitromethane) and sp2 halide part ((hetero)aryl bromides/iodides and alkenyl bromides/iodides). The excellent functional group tolerance was observed, which would enable real world synthetic applications. More importantly, TON of current transformation reached to 3640, when some aryl iodides were used as coupling partners. This represents currently the highest catalyst turnover for transition-metal catalyzed α-arylation of nitroalkanes. Furthermore, the successful application in late-stage modification of complex molecules and synthesis of a known retinoid X receptor (RXR) antagonist exemplified its synthetic potential.

Electrochemical Decarboxylative Alkoxy-alkoxycarbonylation of Alkenes

A method is presented for decarboxylative alkoxy-alkoxycarbonylation of various alkenes with alcohols by electrochemical anodic oxidation of monopotassium ethyloxalate salts with good functional group compatibility. The reaction involves anodic oxidation to form an acyl radical, followed by addition to an olefin to yield a new alkyl radical, which is anodically oxidized to a carbon cation and captured by alcohols to afford β-alkoxyalkanoates. Adding catalytic amounts of ammonium iodide enhanced the efficiency of the reactions.

Nickel-Catalyzed Reductive Arylation of Redox Active Esters for the Synthesis of α-Aryl Nitriles: Investigation of a Chlorosilane Additive

A nickel-catalyzed reductive cross-coupling of redox active N-hydroxyphthalimide (NHP) esters and iodoarenes for the synthesis of α-aryl nitriles is described. The NHP ester substrate is derived from cyanoacetic acid, which allows for a modular synthesis of substituted α-aryl nitriles, an important scaffold in the pharmaceutical sciences. The reaction exhibits a broad scope, and many functional groups are compatible under the reaction conditions, including complex highly functionalized medicinal agents. Mechanistic studies reveal that reduction and decarboxylation of the NHP ester to the reactive radical intermediate are accomplished by a combination of a chlorosilane additive and Zn dust. We demonstrate that stoichiometric chlorosilane is essential for product formation and that chlorosilane plays a role beyond activation of the metal reductant.

The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.

Electrosynthesis of buckyballs with fused-ring systems from PCBM and its analogue

[6,6]-Phenyl-C61-butyric acid methyl ester (PCBM), a star molecule in the fullerene field, has found wide applications in materials science. Herein, electrosynthesis of buckyballs with fused-ring systems has been achieved through radical α-C-H functionalization of the side-chain ester for both PCBM and its analogue, [6,6]-phenyl-C61-propionic acid methyl ester (PCPM), in the presence of a trace amount of oxygen. Two classes of buckyballs with fused bi- and tricyclic carbocycles have been electrochemically synthesized. Furthermore, an unknown type of a bisfulleroid with two tethered [6,6]-open orifices can also be efficiently generated from PCPM. All three types of products have been confirmed by single-crystal X-ray crystallography. A representative intramolecularly annulated isomer of PCBM has been applied as an additive to inverted planar perovskite solar cells and boosted a significant enhancement of power conversion efficiency from 15.83% to 17.67%.

Enantioselective De Novo Synthesis of α,α-Diaryl Ketones from Alkynes

Chiral α,α-diaryl ketones are structural motifs commonly present in bioactive molecules, and they are also valuable building blocks in synthetic organic chemistry. However, catalytic asymmetric synthesis of α,α-diaryl ketones bearing a tertiary stereogenic center remains largely unsolved. Herein, we report a catalytic de novo enantioselective synthesis of α,α-diaryl ketones from simple alkynes via chiral phosphoric acid (CPA) catalysis. A broad range of enolizable α,α-diaryl ketones are prepared in good yields and with excellent enantioselectivities. The described protocol also serves as an efficient deuteration method for the preparation of enantiomerically enriched deuterated α,α-diaryl ketones. Using the methodology reported, bioactive molecules, including one of the best-selling anti-breast cancer drugs, tamoxifen, are readily synthesized.

Cobalt-Catalyzed Enantioconvergent Negishi Cross-Coupling of α-Bromoketones

Cobalt-catalyzed enantioconvergent cross-coupling of α-bromoketones with aryl zinc reagents is achieved to access chiral ketones bearing α-tertiary stereogenic centers with high enantioselectivities. The more challenging and sterically hindered α-bromoketones bearing a 2-fluorophenyl group or β-secondary and tertiary alkyl chains could also be well-tolerated. Adjusting the electronic effect of chiral unsymmetric N,N,N-tridentate ligands is critical for improving the reactivity and selectivity of this transformation, which is beneficial for further studies of asymmetric 3d metal catalysis via ligand modification. The control experiments and kinetic studies illustrated that the reaction involved radical intermediates and the reductive elimination was a rate-determining step.

Palladium-Catalyzed β-C(sp3)-H Arylation of Silyl Prop-1-en-1-ol Ethers with Aryl Halides: Entry to α,β-Unsaturated Ketones

A palladium(0)-catalyzed β-C(sp3)-H arylation of silyl prop-1-en-1-ol ethers with aryl halides for the synthesis of α,β-unsaturated ketones is presented. In contrast to the reported β-C(sp3)-H arylation of ketones, the chemoselectivity of this current method relies on the Pd(0) catalytic systems and reaction temperatures: While using the Pd(dba)2/DavePhos/KF system at 80 °C resulted in β-C(sp3)-H monoarylation to produce β-monoarylated α,β-unsaturated ketones, harnessing the Pd(OAc)2/t-Bu XPhos/K2HPO4 system at 110 °C induced β-C(sp3)-H diarylation to afford β,β-diarylated α,β-unsaturated ketones. The method provides a versatile route that uses readily available ketone-derivatized α-nonsubstituted silyl prop-1-en-1-ol ethers as the alkene sources and is characterized by a good functional group compatibility, a broad substrate scope, and an excellent selectivity.

Deciphering the quest in the divergent total synthesis of natural products

The divergent synthesis of natural products is rapidly developing towards achieving the goal of efficiency and economy in total synthesis. However, presently, the sustainable development of the synthesis of natural products does not permit the linear synthesis of a single target. In this case, divergent total synthesis is based on the identification of an advanced intermediate with structural features that can be mapped in more than two molecules. However, the identification of this intermediate and its scalable synthesis in enantiopure form are challenging. Herein, we present the details of the ingenious efforts by researchers in the last six years toward the divergent synthesis of two to as many as eight natural products initially via a single route, and then diverging from a common intermediate and further branching out toward several natural products. The planning and strategies adopted can serve as guidelines for the future development of efficient divergent routes aimed at achieving higher efficiency toward multiple targets, causing divergent synthesis to become an accepted common practice.

Nickel/Titanocene-Catalyzed Electrophilic Acylation Coupling of Styrene Oxides

The cross-coupling of epoxides with acyl chlorides or anhydrides by a nickel/titanocene dual catalytic system is established. A variety of synthetically useful β-hydroxy ketones were obtained in good to high yields by using modified pyridine-oxazoline ligand. The reaction proceeds via the cooperation of titanocene-catalyzed ring-opening of epoxides and nickel-catalyzed acylation of the benzylic radical intermediate.

Synthetic Approaches to α-, β-, γ-, and δ-lycoranes

Lycorane is a pentacyclic core presented in alkaloids isolated from the Amaryllidaceae family of herbaceous flowering plants. Members of this class of natural products have shown to display important biological properties including analgesic, antiviral, and antiproliferative activities. This review presents the known synthetic routes toward α-, β-, γ-, and δ-lycoranes. α-(19 routes), β-(10 routes), γ-(38 routes), and δ-(6 routes).

Defluorinative Multi-Functionalization of Fluoroaryl Sulfoxides Enabled by Fluorine-Assisted Temporary Dearomatization

Owing to its unique physical properties, fluorine is often used to open up new reaction channels. In this report, we establish a cooperation of [5,5]-rearrangement and fluorine-assisted temporary dearomatization for arene multi-functionalization. Specifically, the [5,5]-rearrangement of fluoroaryl sulfoxides with β,γ-unsaturated nitriles generates an intriguing dearomatized sulfonium species which is short-lived but exhibits unusually high electrophilicity and thus can be instantly trapped by nucleophiles and dienes at a remarkably low temperature (-95 °C) to produce four types of valuable multi-functionalized benzenes, respectively, involving appealing processes of defluorination, desulfurization, and sulfur shift. Mechanistic studies indicate that the use of fluorine on arenes not only circumvents the generally inevitable [3,3]-rearrangement but also impedes the undesired rearomatization process, thus provides a precious space for constructing and elaborating the temporarily dearomatized fluorinated sulfonium species.

A rational design strategy of radical-type mechanophores with thermal tolerance

Radical-type mechanophores (RMs) are attractive molecules that undergo homolytic scission of their central C-C bond to afford radical species upon exposure to heat or mechanical stimuli. However, the lack of a rational design concept limits the development of RMs with pre-determined properties. Herein, we report a rational design strategy of RMs with high thermal tolerance while maintaining mechanoresponsiveness. A combined experimental and theoretical analysis revealed that the high thermal tolerance of these RMs is related to the radical-stabilization energy (RSE) as well as the Hammett and modified Swain-Lupton constants at the para-position (σp). The trend of the RSE values is in good agreement with the experimentally evaluated thermal tolerance of a series of mechanoresponsive RMs based on the bisarylcyanoacetate motif. Furthermore, the singly occupied molecular orbital (SOMO) levels clearly exhibit a negative correlation with σp within a series of RMs that are based on the same skeleton, paving the way toward the development of RMs that can be handled under ambient conditions without peroxidation.

Enantioselective Nucleophilic Vinylic Substitution (SNV) toward 3-Alkenyl-bisoxindoles Facilitated by C6' Steric Bulk of Cinchona Alkaloid

A C6' bulky substituted quinine-catalyzed SNV reaction between 3-substituted oxindole and (E)-3-(nitromethylene)-oxindole was developed. This enantioselective C(sp3)-C(sp2) coupling furnished bisoxindole scaffolds featuring a vinyl-substituted all-carbon quaternary stereocenter with high stereoselectivities. In addition, the gram-scale synthesis and synthetic post-transformations were conducted to demonstrate the potential synthetic usefulness.

Finding activity through rigidity: syntheses of natural products containing tricyclic bridgehead carbon centers

Covering: up to 2022Tricyclic bridgehead carbon centers (TBCCs) are a synthetically challenging substructure found in many complex natural products. Here we review the syntheses of ten representative families of TBCC-containing isolates, with the goal of outlining the strategies and tactics used to install these centers, including a discussion of the evolution of the successful synthetic design. We provide a summary of common strategies to inform future synthetic endeavors.

Catalytic asymmetric defluorinative allylation of silyl enol ethers

The stereocontrolled installation of alkyl fragments at the alpha position of ketones is a fundamental yet unresolved transformation in organic chemistry. Herein we report a new catalytic methodology able to construct α-allyl ketones via defluorinative allylation of silyl enol ethers in a regio-, diastereo- and enantioselective manner. The protocol leverages the unique features of the fluorine atom to simultaneously act as a leaving group and to activate the fluorophilic nucleophile via a Si-F interaction. A series of spectroscopic, electroanalytic and kinetic experiments demonstrate the crucial interplay of the Si-F interaction for successful reactivity and selectivity. The generality of the transformation is demonstrated by synthesising a wide set of structurally diverse α-allylated ketones bearing two contiguous stereocenters. Remarkably, the catalytic protocol is amenable for the allylation of biologically significant natural products.

α-Vinylation of Ester Equivalents via Main Group Catalysis for the Construction of Quaternary Centers

A methodology for the construction of sterically congested quaternary centers via the trapping of vinyl carbocations with silyl ketene acetals is disclosed. This main group-catalyzed α-vinylation reaction is advantageous as methods to access these congested motifs are limited. Moreover, β,γ-unsaturated carbonyl moieties and tetrasubstituted alkenes are present in various bioactive natural products and pharmaceuticals, and this catalytic platform offers a means of accessing them using simple and inexpensive materials.

Highly efficient α-arylation of aryl ketones with aryl chlorides by using bulky imidazolylidene-ligated oxazoline palladacycles

α-Aryl derivatives of carbonyl compounds are important building blocks. Herein, we presented an efficient catalytic system for the α-arylation of aryl ketones with inactive aryl chlorides by firstly using N,N'-bis(2,6-diisopropylphenyl)-imidazol-2-ylidene (IPr)-ligated chiral oxazoline palladacycles, and tolerated a wide range of substrates at low catalyst loadings, leading to the desired products in good to excellent yields.

Asymmetric reactions involving aryne intermediates

Although arynes are usually considered fleeting intermediates, they are highly valuable synthons because they enable the introduction of aromatic rings and the simultaneous formation of new bonds at two sites. Although catalytic reactions using transition metals are excellent method for constructing complex polycyclic aromatic molecules in a single step, the use of asymmetric catalysis for the capture of arynes remains a crucial goal for the progress of aryne chemistry. Catalytic asymmetric reactions of arenes are challenging, requiring sufficient interactions between the neutral and highly reactive short-lived aryne intermediates in a stereo-controlled fashion. In addition, spontaneous decomposition, as well as side reactions, has hindered their development and, until recently, highly enantioselective reactions using arynes had remained elusive. This Review highlights asymmetric reactions using arynes, featuring diastereoselective, enantioselective and catalytic enantioselective reactions.

Highly Reactive Hydrocarbon Soluble Alkylsodium Reagents for Benzylic Aroylation of Toluenes using Weinreb Amides

Deaggregating the alkyl sodium NaCH₂ SiMe₃ with polydentate nitrogen ligands enables the preparation and characterisation of new, hydrocarbon soluble chelated alkylsodium reagents. Equipped with significantly enhanced metalating power over their organolithium counterparts, these systems can promote controlled sodiation of weakly acidic benzylic C-H bonds from a series of toluene derivatives under mild stoichiometric conditions. This has been demonstrated through the benzylic aroylation of toluenes with Weinreb amides, that delivers a wide range of 2-arylacetophenones in good to excellent yields. Success in isolating and determining the structures of key organometallic intermediates has provided useful mechanistic insight into these new sodium-mediated transformations.

Computer-Driven Development of Ylide Functionalized Phosphines for Palladium-Catalyzed Hiyama Couplings

Palladium-catalyzed couplings of silicon enolates with aryl electrophiles are of great synthetic utility, but often limited to expensive bromide substrates. A comparative experimental study confirmed that none of the established ligand systems allows to couple inexpensive aryl chlorides with α-trimethylsilyl alkylnitriles. In contrast, ylide functionalized phosphines (YPhos) led to encouraging results. A statistical model was developed that correlates the reaction yields with ligand features. It was employed to predict catalyst structures with superior performance. With this cheminformatics approach, YPhos ligands were tailored specifically to the demands of Hiyama couplings. The newly synthesized ligands displayed record-setting activities, enabling the elusive coupling of aryl chlorides with α-trimethylsilyl alkyl nitriles. The preparative utility of the catalyst system was demonstrated by the synthesis of pharmaceutically meaningful α-aryl alkylnitriles, α-arylcarbonyls and biaryls.

Catalytic Asymmetric Synthesis of Tröger's Base Analogues with Nitrogen Stereocenter

Nitrogen stereocenters are common chiral units in natural products, pharmaceuticals, and chiral catalysts. However, their research has lagged largely behind, compared with carbon stereocenters and other heteroatom stereocenters. Herein, we report an efficient method for the catalytic asymmetric synthesis of Tröger's base analogues with nitrogen stereocenters via palladium catalysis and home-developed GF-Phos. It allows rapid construction of a new rigid cleft-like structure with both a C- and a N-stereogenic center in high efficiency and selectivity. A variety of applications as a chiral organocatalyst and metallic catalyst precursors were demonstrated. Furthermore, DFT calculations suggest that the NH···O hydrogen bonding and weak interaction between the substrate and ligand are crucial for the excellent enantioselectivity control.

Base-Controlled Palladium-Catalyzed Intramolecular 'One Substrate - Five Reactions' of 5-Benzyl-1-(2-halobenzyl)-2-phenyl-1H-pyrazol-3(2H)-ones

Achieving site-selectivity and chemoselectivity is enormously challenging for substrates with multi-reactive sites in organic reactions. One kind of model substrates, 5-benzyl-1-(2-halobenzyl)-2-phenyl-1H-pyrazol-3(2H)-ones with six reactive sites were chosen as the examples to probe their intramolecular four kinds of five reactions including C(sp³ )-H arylation, C(sp² )-H arylation, reductive Heck reaction, and domino Heck reaction/alkylation of aryl C(sp² )-H bonds through variation of the reaction conditions. Screening of the reaction conditions showed that the different bases controlled the palladium-catalyzed intramolecular site-selectivity and chemoselectivity of the substrates: (i) Cesium carbonate (Cs₂ CO₃ ) promoted the benzyl C(sp³ )-H arylation of the substrates providing dihydropyrazolo[1,5-b]isoquinolin-2(1H)-ones at 100 °C, and isomerization of the dihydropyrazolo[1,5-b]isoquinolin-2(1H)-ones gave isoquinoline derivatives at a higher temperature (140 °C); (ii) Sodium acetate (NaOAc) mediated the aryl C(sp² )-H arylation of the substrates affording seven-membered biphenyl N-heterocycles; (iii) Sodium dichloroacetate (Cl₂ HCCO₂ Na) facilitated occurrence of the reductive Heck reaction of the substrates affording 1H-pyrazolo[5,1-a]isoindol-2(8H)-ones; (iv) Sodium trifluoroacetate (F₃ CCO₂ Na) assisted performance of the domino Heck reaction/aryl C(sp² )-H alkylation of the substrates leading to the spiro heterocycles. The 'one substrate - multiple reactions - multiple products' strategy greatly reduces cost, increases diversity of products, provides more opportunity for screening of pharmaceutical molecules, and enriches modern organic synthetic chemistry.

Rhodium-Catalyzed Diastereo- and Enantioselective Divergent Annulations between Cyclobutanones and 1,5-Enynes: Rapid Construction of Complex C(sp3)-Rich Scaffolds

Given the emerging demand to "escape from flatland" for drug discovery, synthetic methods that can efficiently construct complex three-dimensional structures with multi-stereocenters become increasingly valuable. Here, we describe the development of Rh(I)-catalyzed intramolecular annulations between cyclobutanones and 1,5-enyne groups to construct complex C(sp3)-rich scaffolds. Divergent reactivities are realized with different catalysts, and excellent diastereo- and enantioselectivity have been achieved. The use of (R)-H8-binap as the ligand favors forming the bis-bicyclic scaffolds with multiple quaternary stereocenters, while the (R)-segphos ligand prefers to generate the tetrahydro-azapinone products. Owing to the versatile reactivity of ketone moieties, these C(sp3)-rich scaffolds can be further functionalized. Experimental and computational mechanistic studies support a reaction pathway involving enyne-cyclometallation, 1,2-carbonyl addition, and then β-carbon elimination; the divergent reactivities are dictated by a product-determining Rh-alkyl migratory insertion step.

Bismuth-Mediated α-Arylation of Acidic Diketones with ortho-Substituted Boronic Acids

The α-arylation of cyclic and fluoroalkyl 1,3-diketones is made challenging by the highly stabilized nature of the corresponding enolates, and is especially difficult for sterically demanding aryl partners. As a general solution to this problem, we report the Bi-mediated oxidative coupling of acidic diones and ortho-substituted arylboronic acids. Starting from a bench-stable bismacycle precursor, a sequence of B-to-Bi transmetallation, oxidation and C-C bond formation furnishes the arylated diones. Development of methodology that tolerates both sensitive functionality and steric demand is supported by interrogation of key reactive intermediates. Application of our strategy to cyclic diones enables the concise synthesis of important agrochemical intermediates which were previously prepared using toxic Pb reagents. This methodology also enables the first ever arylation of fluoroalkyl diones which, upon condensation with hydrazine, provides direct access to valuable fluoroalkyl pyrazoles.

Direct Use of Phosphonium Salts for Alkylation of p-Quinols: Formal α-Arylation of Carbonyls via a 5-Membered Betaine-Type Intermediate

Unlike phosphonium ylides used extensively for C═C bond formation, herein we disclose the direct use of phosphonium salts for site-selective alkylation to p-quinols via a 5-membered betaine-type intermediate. This strategy provides a novel and general approach for the synthesis of α-(m-aminoaryl) esters, amides and ketones under ambient conditions. The reaction proceeds through in situ generation of P-ylide, alkylation and aromatization. Reaction is highly compatible with diverse functional phosphonium salts and amines.

KOtBu-catalysed α-homoallylic alkylation of acyclic amides with 1-aryl-1,3-dienes

Herein, we report a KOtBu-catalysed α-homoallylic alkylation of acyclic amides with 1-aryl-1,3-dienes. With this transition metal-free and atom-economic protocol, a series of α-homoallylic alkylated acyclic amides were synthesized in good to excellent yields. This transformation is proposed to proceed through a cation-π interaction-based C-C bond formation from the in situ-generated potassium enolate with the diene unit.

Exogenous Ligand-Free NiH-Catalyzed Hydroacylation of Aryl Alkenes with Aroyl Fluorides

Acyl fluorides have emerged as efficient acyl group donors, but these attractive reagents have rarely been utilized in transition-metal-catalyzed hydroacylation. Herein we report a nickel hydride-catalyzed hydroacylation of aryl alkenes using aroyl fluorides. The reaction proceeds without recourse to an exogenous ligand under mild conditions. The synthetic utility of the present method is demonstrated by the glovebox-free, gram-scale reaction and the late-stage derivatization of complex molecules containing pharmaceutical frameworks.