Visual monitoring of cisplatin-regulated caspase-3 activity in living cells based on a reduced graphene oxide-loaded fluorescent probe

Cisplatin (DDP) is a potent chemotherapeutic drug, which can regulate tumor cell apoptosis by up-regulating caspase-3 activity. Thus, monitoring caspase-3 activity in breast cancer cells can directly illustrate the efficiency of DDP treatment. In this study, by using reduced graphene oxide (rGO) as a quencher of a fluorescence labeled peptide, we developed an "off to on" method to monitor the effect of DDP on caspase-3 in breast cancer cells. In this method, the rGO quenched fluorescence with an ultra-high level of efficiency. Caspase-3 hydrolyzed the polypeptide probe, generating two segments of different lengths. The release of a short segment marked with fluorophores led to the recovery of the fluorescence signal (Ex/Em = 450/521 nm). Under the optimal conditions, the linear range of caspase-3 was 0.4-7 U mL-1 and the limit of detection was 0.33 U mL-1. The upregulating effect of DDP on intracellular caspase-3 activity was visualized with the "off to on" method and flow cytometry assay showed that caspase-3 activity increased along with the apoptosis rate of tumor cells. The above results show the practical application of the method for evaluating the efficacy of drugs against cancer cells.

Effects of nanographene oxide on adipose-derived stem cell cryopreservation

Cryoinjury mitigation is key in cell cryopreservation. Here, we aimed to assess the effectiveness of nanographene oxide (nano-GO) for improving cryoprotectant agents (CPAs) in human adipose stem cell (hADSC) cryopreservation. For in vitro experiments, nano-GO (5 μg/mL) was added to the CPAs in the control, and passage (P) 2 hADSCs were collected and cryopreserved for around two weeks. We compared cytotoxicity, cell viability, immunophenotypes, proliferation, cell apoptosis, and tri-lineage differentiation. In vivo, studies used lipoaspirate to create non-enriched or hADSC-enriched fat tissues by combining it with PBS or hADSCs cryopreserved with the aforementioned CPAs. Each nude mouse received a 0.3 mL subcutaneous injection of the graft. At 12 weeks, the grafts were harvested. Histology, adipocyte-associated genes and protein, vascular density and angiogenic cytokines, macrophage infiltration, and inflammatory cytokines were analyzed. Nano-GO CPA contributed to increased cell viability, improved cell recovery, and lowered levels of early apoptosis. Nano GO at concentrations of 0.01-100 μg/mL caused no cytotoxicity to hADSCs. The absence of nano GOs in the intracellular compartments of the cells was confirmed by transmission electron microscopy. The fat grafts from the CPA-GO group showed more viable adipocytes and significantly increased angiogenesis compared to the PBS and CPA-C groups. Adding hADSCs from the CPA-GO group to the graft reduced macrophage infiltration and MCP-1 expression. Nano-GO plays an anti-apoptotic role in the cryopreservation of hADSCs, which could improve the survival of transplanted fat tissues, possibly via improved angiogenesis and lower inflammatory response in the transplanted adipose tissue.

Graphene Oxide Strengthens Gelatine through Non-Covalent Interactions with Its Amorphous Region

Graphene oxide (GO) has attracted huge attention in biomedical sciences due to its outstanding properties and potential applications. In this study, we synthesized GO using our recently developed 1-pyrenebutyric acid-assisted method and assessed how the GO as a filler influences the mechanical properties of GO-gelatine nanocomposite dry films as well as the cytotoxicity of HEK-293 cells grown on the GO-gelatine substrates. We show that the addition of GO (0-2%) improves the mechanical properties of gelatine in a concentration-dependent manner. The presence of 2 wt% GO increased the tensile strength, elasticity, ductility, and toughness of the gelatine films by about 3.1-, 2.5-, 2-, and 8-fold, respectively. Cell viability, apoptosis, and necrosis analyses showed no cytotoxicity from GO. Furthermore, we performed circular dichroism, X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy analyses to decipher the interactions between GO and gelatine. The results show, for the first time, that GO enhances the mechanical properties of gelatine by forming non-covalent intermolecular interactions with gelatine at its amorphous or disordered regions. We believe that our findings will provide new insight and help pave the way for potential and wide applications of GO in tissue engineering and regenerative biomedicine.

Synthesis, Photoswitching Behavior and Nonlinear Optical Properties of Substituted Tribenzo[a,d,g]coronene

A family of tribenzocoronene derivatives bearing various substituents (3) were constructed through the Diels-Alder reaction, followed by the Scholl oxidation, where the molecular structure of 3b was determined via single crystal X-ray diffraction analysis. The effect of substitution on the optical and electrochemical property was systematically investigated, with the assistance of theoretical calculations. Moreover, the thin films of the resulting molecules 3b and 3e complexed with fullerene produced strong photocurrent response upon irradiation of white light. In addition, 3b and 3e exhibit a positive nonlinear optical response resulting from the two-photon absorption and excited state absorption processes.

Oxidation state of graphene oxide nanosheets drives their interaction with proteins: A case of bovine serum albumin

In the present study, we explored the interaction of bovine serum albumin (BSA) with oxidized graphene oxide (GO) nanosheets. Nanosheets, synthesized with 4, 6, 8, 10 and 12 wt equivalents of KMnO₄ as oxidant, were coded as GO-4, GO-6, GO-8, GO-10 and GO-12, respectively. After incubating sheets with a fixed concentration of BSA at room temperature, interactions were monitored with time. The analysis is based on UV-vis spectroscopy, fluorescence quenching, dynamic light scattering (DLS), small angle neutron scattering (SANS), Fourier transform infrared (FTIR) spectroscopy and circular dichroism (CD) techniques. Binding of BSA over sheets was recorded in the following order; GO-04 >> GO-06 > GO-08 > GO-10 ≈ GO-12. Our observations suggest that these interactions are largely regulated by the availability of pure graphitic domains and density of oxygen functionalities on sheet surface. This led us to the conclusion that GO-protein interactions can be minimized by modulating the extent of sheet oxidation. Moreover, we show that adsorption of proteins as colloidal aggregates contributes to improved biosafety of sheets. The protein molecule did not exhibit depletive changes in its conformation. However, from the viewpoint of drug delivery applications, density of oxygen groups must be optimized for maximizing the loading efficiency of oxidized sheets.

The Third-Order Nonlinear Optical Properties of Sb2S3/RGO Nanocomposites

Antimony sulfide/reduced graphene oxide (Sb2S3/RGO) nanocomposites were synthesized via a facile, one-step solvothermal method. XRD, SEM, FTIR, and Raman spectroscopy were used to characterize the uniform distribution of Sb2S3 nanoparticles on the surface of graphene through partial chemical bonds. The third-order nonlinear optical (NLO) properties of Sb2S3, RGO, and Sb2S3/RGO samples were investigated by using the Z-scan technique under Nd:YAG picosecond pulsed laser at 532 nm. The results showed that pure Sb2S3 particles exhibited two-photon absorption (TPA), while the Sb2S3/RGO composites switched to variable saturated absorption (SA) properties due to the addition of different concentrations of graphene. Moreover, the third-order nonlinear susceptibilities of the composites were also tunable with the concentration of the graphene. The third-order nonlinear susceptibility of the Sb2S3/RGO sample can achieve 8.63 × 10−12 esu. The mechanism for these properties can be attributed to the change of the band gap and the formation of chemical bonds supplying channels for photo-induced charge transfer between Sb2S3 nanoparticles and the graphene. These tunable NLO properties of Sb2S3/RGO composites can be applicable to photonic devices such as Q-switches, mode-locking devices, and optical switches.

Application of Functionalized Graphene Oxide Based Biosensors for Health Monitoring: Simple Graphene Derivatives to 3D Printed Platforms

Biosensors hold great potential for revolutionizing personalized medicine and environmental monitoring. Their construction is the key factor which depends on either manufacturing techniques or robust sensing materials to improve efficacy of the device. Functional graphene is an attractive choice for transducing material due to its various advantages in interfacing with biorecognition elements. Graphene and its derivatives such as graphene oxide (GO) are thus being used extensively for biosensors for monitoring of diseases. In addition, graphene can be patterned to a variety of structures and is incorporated into biosensor devices such as microfluidic devices and electrochemical and plasmonic sensors. Among biosensing materials, GO is gaining much attention due to its easy synthesis process and patternable features, high functionality, and high electron transfer properties with a large surface area leading to sensitive point-of-use applications. Considering demand and recent challenges, this perspective review is an attempt to describe state-of-the-art biosensors based on functional graphene. Special emphasis is given to elucidating the mechanism of sensing while discussing different applications. Further, we describe the future prospects of functional GO-based biosensors for health care and environmental monitoring with a focus on additive manufacturing such as 3D printing.

A naturally fluorescent protein C-phycoerythrin and graphene oxide bio-composite as a selective fluorescence 'turn off/on' probe for DNA quantification and characterization

Highly specific graphene-DNA interactions have been at the forefront of graphene-based sensor design for various analytes, including DNA itself. However, in addition to its detection, DNA also needs to be characterized according to its size and concentration in a sample, which is an additional analytical step. Designing a highly sensitive and selective DNA sensing and characterization platform is, thus, of great interest. The present study demonstrates that a bio-derived, naturally fluorescent protein C-phycoerythrin (CPE) - graphene oxide (GO) bio-composite can be used to detect dsDNA in nanomolar quantities efficiently via fluorescent "turn off/on" mechanism. Interaction with GO temporarily quenches CPE fluorescence in a dose-dependent manner. Analytical characterization indicates an indirect charge transfer with a corresponding loss of crystalline GO structure. The fluorescence is regained with the addition of DNA, while other biomolecules do not pose any hinderance in the detection process. The extent of regain is DNA length dependent, and the corresponding calibration curve successfully quantifies the size of an unknown DNA. The incubation time for detection is ~3-5 min. The bio-composite platform also works successfully in a complex biomolecule matrix and cell lysate. However, the presence of serum albumin poses a hinderance in the serum sample. Particle size analysis proves that CPE displacement from GO surface by the incoming DNA is the reason for the 'turn on' response, and that the sensing process is exclusive to dsDNA. This new platform could be an exciting and rapid DNA sensing and characterization tool.

Toxicity of Graphene: An Update

Graphene possesses wider biomedical applications including drug delivery, photothermal ablation of tumors, biosensors, and also in the disease diagnosis. The accidental or intentional exposure of the environment including plants, ecosystem, and humans toward graphene is gradually increasing. Therefore, graphene toxicity becomes a critical issue to be addressed despite their diverse applications in multiple fields. In this situation, the scientific community as well as the general public must get awareness about the toxicity of graphene. This article, therefore, reviews the investigations on graphene toxicity. This review reveals the toxicity of graphene in vitro, in vivo models along with the environmental toxicity. The advantages of graphene toxicity in bacterial cells and cancer cells were also reviewed.

A graphene-based fluorescent nanoprobe for simultaneous imaging of dual miRNAs in living cells

MicroRNAs (miRNAs) are regarded as important biomarkers for disease diagnostics and therapeutics due to their significant regulatory roles in physiologic and pathologic processes. Herein, a versatile nanoprobe based on reduced graphene oxide (rGO) and nucleic acid (DNA) probe was prepared for simultaneously visualize miR-451a and miR-214-3p in living cells. In vitro experiments demonstrated that the nanoprobe exhibits excellent selectivity and outstanding sensitivity as low as 1 nM towards miR-451a and miR-214-3p. Moreover, the detection signals of miRNAs have good linearity in their respective concentration ranges (miR-451a: 1-100 nM, Y₁ = 9.3062X₁+114.85 (R² = 0.9965). miR-214-3p: 1-200 nM, Y₂ = 1.4424X₂+91.312 (R² = 0.9961)). Finally, simultaneous dual-color imaging of miR-451a and miR-214-3p in human breast cancer cells (MDA-MB-231) was realized by exploiting the P₁&P₂@rGO nanoprobe. In summary, this simple and effective strategy provides a general sensing platform for highly sensitive detection and simultaneous imaging of dual miRNAs in living cells.

Golden Jubilee of Singapore National Institute of Chemistry (1970-2020): Celebrating its Partnership with Wiley-VCH

This year Singapore National Institute of Chemistry (SNIC) is celebrating its golden jubilee (1970-2020). Wiley-VCH has been a steadfast partner accompanying the rapid rise of chemistry research in Singapore. In celebration of this golden jubilee, we highlight 50 significant papers published in Angewandte Chemie by scholars currently based in Singapore, covering the widest possible spectrum of chemistry research.

A sensitive immunoassay based on fluorescence resonance energy transfer from up-converting nanoparticles and graphene oxide for one-step detection of imidacloprid

In this study, a fluorescence resonance energy transfer (FRET) immunoassay based on graphene oxide (GO) and up-converting nanoparticles (UCNPs) was established for rapid detection of imidacloprid, a commonly-used insecticide. Under 980 nm near-infrared light excitation, emission of UCNPs at 542 nm can be absorbed by the energy acceptor GO. The carboxyl-functionalized GO and UCNPs were coupled with competitive antigen and antibody against imidacloprid. After optimization, the FRET immunoassay showed a wide detection range of 0.08-50 ng/mL to imidacloprid, with cross-reaction toward other three neonicotinoids including imidaclothiz (74.4%), thiacloprid (36.9%) and clothianidin (31.9%). The average recoveries of spiked water, Chinese cabbage, cucumber, honey and tea samples were 76.8%-101.8%. The accuracy and reliability of the FRET immunoassay were verified by UPLC-MS/MS with a good correlation (R² = 0.9816). In a summary, this study provides a sensitive and one-step method for monitoring imidacloprid residue in food and environmental samples within 1 h.

Modulation of protein-graphene oxide interactions with varying degrees of oxidation

The degree of oxidation of graphene oxide (GO) has been shown to be important for its toxicity and drug-loading efficiency. However, the effect of its variations on GO-protein interaction remains unclear. Here, we evaluate the effect of the different oxidation degrees of GO on its interaction with human ubiquitin (8.6 kDa) using solution state nuclear magnetic resonance (NMR) spectroscopy in combination with other biophysical techniques. Our findings show that the interaction between the protein and the different GO samples is weak and electrostatic in nature. It involves fast dynamic exchange of the protein molecules from the surface of the GO. As the oxidation degree of the GO increases, the extent of the interaction with the protein changes. The interaction of the protein with GO can thus be modulated by tuning the degree of oxidation. This study opens up new avenues to design appropriate graphenic materials for use in various biomedical fields such as drug delivery, biomedical devices and imaging.

Toehold-regulated competitive assembly to accelerate the kinetics of graphene oxide-based biosensors

With effective adsorption and quenching efficiency, graphene oxide (GO) can be utilized for sensing biomolecules such as nucleic acids and proteins. In these assays, the fluorophore-labeled nucleic acid (reporter) is usually adsorbed by GO first, followed by adding the target molecules to bind the reporter, thus restoring the fluorescence signal. However, the kinetics of fluorescence recovery is usually very slow because the target is probably adsorbed by GO and compromises the binding of the target and the reporter. Herein, we proposed a toehold-regulated strand displacement strategy to accelerate the kinetics of GO-based biosensing. In this strategy, the toehold of the duplex mediated a competitive assembly with the aim of eliminating the adsorption of the target by GO, facilitating the binding of the target and the reporter. While the duplex with the toehold of the target-blocker DNA or reporter-blocker DNA was formed, the rigid structure of the duplex weakened the adsorption of the target by GO and enhanced the recognition of the target by the reporter. This strategy achieved up to 2.6-fold enhancement in fluorescence signal restoration for nucleic acid detection, while there was 3.2-fold enhancement in fluorescence signal restoration for thrombin detection. It has also been demonstrated that this strategy can be used for the determination of DNA and thrombin in diluted serum with excellent specificity.

High sensitive gas sensor based on vertical graphene field effect transistor

A gas sensor made from graphene vertical field effect transistor (VGr-FET) has been fabricated using graphene as the source electrode, C₆₀ thin film as the semiconductor layer and aluminum thin film as the drain electrode. The on/off ratio of transistor gated by bottom electrode with ionic liquid gel as dielectric layer is derived to be 10³ from measured source-drain current I _ds. The apparent energy barrier height between the graphene and polycrystalline fullerene was calculated from the model of heterojunction diode I-V response curves. The barrier height φ _BH was altered by the gating potential vertically applied on graphene sheet, resulting the large on/off ratio of the transistor. The effect of surface adsorption of water vapor, oxygen, ammonia and isoprene gas phase molecules on the I _ds was measured. The lower limit of detection (LOD) for ammonia (86 ppb) than that of isoprene (420 ppb) is attributed to the donor nature of ammonia contact with p-type graphene, and the adsorbed donor leads to a corresponding positive gating effect to the VGr-FET. This facile, low cost and quick responsive device shows promise for early diagnose of severe human respiratory diseases.

A Simple and Robust Functionalization of Graphene for Advanced Energy Devices

Efficient and selective methods for graphene functionalization are needed because they allow tuning of the graphene surface and electronic properties. To date, graphene has been functionalized using ionic bonds, π-π interactions, and covalent bonds. Graphene derivatives based on these methods have been used in various applications, but a new functionalization strategy that improves the properties of graphene is still needed. Herein, a new concept for graphene functionalization using halogenated graphene has been developed, in which brominated graphene is successfully functionalized by heteroatom-containing molecules to form onium bonds, such as pyridinium or ammonium. The counterion bromide is replaced with other anions, such as sulfate, by treating with sulfuric acid while retaining the molecules, which demonstrates the durable properties of onium bonding. To emphasize the advantages of this strategy for graphene functionalization, the performance for energy-related applications, such as biofuel cells, supercapacitors, and Li-ion batteries, is evaluated after introducing redox-active moieties onto graphene through onium bonding. This new graphene functionalization concept will provide a new approach to the design of tailor-made materials with targeted functions.

DNA nanosheet as an excellent fluorescence anisotropy amplification platform for accurate and sensitive biosensing

Recently, various inorganic nanomaterials have been used as fluorescence anisotropy (FA) enhancers for biosensing successfully. However, most of them are size-uncontrollable and possess an intensive fluorescence quenching ability, which will seriously reduce the accuracy and sensitivity of FA method. Herein, we report a two-dimensional DNA nanosheet (DNS) without fluorescence quenching effect as a novel FA amplification platform. In our strategy, fluorophore-labeled probe DNA (pDNA) is linked onto the DNS surface through the hybridization with the handle DNA (hDNA) that extended from the DNS, resulting in the significantly enhanced FA value. After the addition of target, the pDNA was released from the DNS surface due to the high affinity between the hDNA and target, and the FA was decreased. Thus, target could be detected by the significantly decreased FA value. The linear range was 10-50 nM and the limit of detection was 8 nM for the single-stranded DNA detection. This new method is general and has been also successfully applied for the detection of ATP and thrombin sensitively. Our method improved the accuracy of FA assay and has great potential to detect series of biological analytes in complex biosensing systems.

Graphene quantum dots mediated electron transfer in DNA base pairs

Graphene quantum dots (GQDs) were connected to [Ru(bpy)3]2+ to sense DNA-mediated charge transfer. Interaction between abasic site double stranded DNA (Abasic-DNA) and [Ru(bpy)3-GQD]2+ was investigated by absorption spectroscopy, gel electrophoresis, circular dichroism, and melting temperature measurements. The results indicate that [Ru(bpy)3-GQD]2+ could be intercalated into double stranded DNA. Using [Ru(bpy)3-GQD]2+ as a signal molecule, the charge transfer performance of DNA-intercalated [Ru(bpy)3-GQD]2+ was determined using electrochemical and electrochemiluminescence measurements. Various DNA types were immobilized on Au electrodes via Au-S bonds. Electrochemiluminescence and electrochemical measurements indicate that [Ru(bpy)3-GQD]2+ could enhance DNA-mediated charge transfer when intercalated into an abasic site of double stranded DNA. And comparing with [Ru(bpy)3]2+, it can be concluded that GQDs intercalate into the DNA duplex by acting as a base analog, thus enhancing DNA charge transfer. These findings suggest that the DNA-GQD structure could aid the development of molecular devices and electric drivers, and broaden the application of DNA charge transfer.

Effects of bovine serum albumin (BSA) on the excited-state properties of meso-tetrakis(sulfonatophenyl) porphyrin (TPPS4)

To infer changes in the photophysical properties of porphyrins due to complexation with albumin, a combination of Z-scan and conventional spectroscopic techniques was employed. We measured the characteristics of excited states of meso-tetrakis(sulfonatophenyl) porphyrin bound to bovine serum albumin and observed that the binding reduces the intersystem crossing quantum yield and increases the internal conversion one. A reverse saturable absorption process was observed in the nanosecond timescale. These results are important for prediction of the efficiency of this complex in medical and optical applications, because associating porphyrins to proteins enables better accumulation in tumors and improves its stability in optical devices, but at the same time, decreases its triplet quantum yield.

The Role of Fluorinated IL as an Interfacial Agent in P(VDF-CTFE)/Graphene Composite Films

The incorporation of graphene into a polymer matrix can endow composites with extended functions. However, it is difficult to well disperse pristine graphene into a polymer matrix in order to obtain polymer nanocomposites due to the lack of functional groups on the surface for bonding with a polymer matrix. Herein, we investigated the role of fluorinated ionic liquid (IL) as a new interfacial agent in poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE))/graphene composite films. First, a task-specific IL, perfluorooctyltriphenylphosphonium iodide (IL-C8F13), was synthesized and adsorbed on the surface of graphene oxide (GO) and reduced graphene oxide (rGO) for making functional nanofillers which were capable of being incorporated into the P(VDF-CTFE) matrix. The cation structure of IL combined three phenyls (potential π–π interactions with graphene) and a short fluorinated chain (enhanced miscibility with fluorinated matrix via dipolar interactions) to make a compatible graphene filler and P(VDF-CTFE) matrix at the interface among them. Second, two series of P(VDF-CTFE)/GO-IL and P(VDF-CTFE)/rGO-IL composites with different loading contents were prepared with the goal of providing an understanding of the mechanism of interfacial interactions. This paper investigated the difference in the interaction model between GO with IL and rGO with IL. Subsequently, the interfacial effect of IL on the properties of P(VDF-CTFE)/graphene composites, such as crystallization, chain segmental relaxation behavior, dispersion, and the final dielectric properties will be further studied.

Graphene Oxide: From Tunable Structures to Diverse Luminescence Behaviors

Since the first discovery of luminescent graphene oxide (GO), exponentially increasing investigations on the tunable structures and surfaces for modulating its optical properties have struggled to expand applications in imaging, sensing, biomedical diagnostics, and so on. Here, the latest works on reconstructing or modifying the structures and surfaces of GO to achieve diverse luminescence are systematically reviewed, including fluorescence, electroluminescence, and chemiluminescence. Moreover, the fundamental difficulties of the investigations and applications of luminescent GO nanomaterials are clarified to inspire more constructive thoughts for expanding their application boundaries.

Naphthalimide-based optical turn-on sensor for monosaccharide recognition using boronic acid receptor

A highly selective and sensitive fluorescent sensor for the determination of fructose is developed. The fluorescent sensor was prepared by incorporating a new naphthalimide dye with a planar structure as a selectophore and graphene oxide (GO) nanoplatelets as a quencher for rapid optical detection of fructose. The designed probe, made with the high fusion loop-containing dye, along with the GO nanoplatelets, detected fructose over the other monosaccharides very well. The proposed sensor displays a linear response range of 7 × 10-5 to 3 × 10-2 M with a low limit of detection of 23 × 10-6 M in solution at pH 7.4. This sensor shows a good selectivity towards fructose with respect to other saccharides. The proposed sensor was then applied to the determination of fructose in human plasma with satisfactory results.

The magnetic graphene oxide/NHC catalyzed aerobic direct amidation and cross-dehydrogenative coupling of aldehydes

The synthesis of a novel recoverable catalyst based on graphene and NHC for the cross dehydrogenative coupling of aldehydes is described, as well as the synthesis of amides and the construction of the C–C bonds.

Graphene oxide nanocomposite hydrogel based on poly(acrylic acid) grafted onto salep: an adsorbent for the removal of noxious dyes from water

In this study, a graphene oxide nanocomposite hydrogel (GONH) based on poly(acrylic acid) grafted onto a natural salep polysaccharide was synthesized and investigated as an adsorbent for the removal of cationic dye from aqueous solution.

A graphene oxide nanosensor enables the co-delivery of aptamer and peptide probes for fluorescence imaging of a cascade reaction in apoptotic signaling

Cytochrome c (Cyt c) and caspase-3 are the key mediators in apoptotic signaling. As is known to all, the release of Cyt c from mitochondria is a vital caspase activation pathway and defines the point of no-return in cell apoptosis. However, it has not been reported that any fluorescence imaging tools could allow simultaneous visualization of Cyt c translocation and caspase-3 activation in apoptotic cells. Here, we develop a sensitive nanosensor that holds the capability of imaging of the released Cyt c from the mitochondria and a caspase-3 activation cascade reaction in apoptotic signaling. The nanosensor is constructed by the assembly of a fluorophore (Cy5)-tagged DNA aptamer on graphene nanosheets that have been covalently immobilized with a FAM-labeled peptide. After a spatially selective delivery into the cytoplasm, the Cy5-tagged DNA aptamer assembled on the nanosensor can bind with Cyt c released from the mitochondria to the cytoplasm and dissociate from graphene, triggering a red fluorescence signal. In addition, the caspase-3 activated by the Cyt c released to the cytoplasm can cleave the FAM-labeled peptide and result in a green fluorescence output. The nanosensor exhibits rapid response, high sensitivity and selectivity for in vitro assays, and high contrast imaging of Cyt c and caspase-3 in living cells. It also provides the method for the study of the kinetic relationship between the Cyt c translocation and caspase-3 activation through simultaneous imaging of Cyt c and caspase-3. The developed nanosensor described here will be an efficient and potential platform for apoptosis research.

Graphene and Graphene-Based Nanomaterials for DNA Detection: A Review

DNA detection with high sensitivity and specificity has tremendous potential as molecular diagnostic agents. Graphene and graphene-based nanomaterials, such as graphene nanopore, graphene nanoribbon, graphene oxide, and reduced graphene oxide, graphene-nanoparticle composites, were demonstrated to have unique properties, which have attracted increasing interest towards the application of DNA detection with improved performance. This article comprehensively reviews the most recent trends in DNA detection based on graphene and graphene-related nanomaterials. Based on the current understanding, this review attempts to identify the future directions in which the field is likely to thrive, and stimulate more significant research in this subject.

Supramolecular Reassembly of Self-Exfoliated Ionic Covalent Organic Nanosheets for Label-Free Detection of Double-Stranded DNA

Ionic covalent organic nanosheets (iCONs), a member of the two-dimensional (2D) nanomaterials family, offer a unique functional platform for a wide range of applications. Herein, we explore the potential of an ethidium bromide (EB)-based covalent organic framework (EB-TFP) that self-exfoliates in water resulting in 2D ionic covalent organic nanosheets (EB-TFP-iCONs) for the selective detection of double-stranded DNA (dsDNA). In an aqueous medium, the self-exfoliated EB-TFP-iCONs reassemble in the presence of dsDNA resulting in hybrid EB-TFP-iCONs-DNA crystalline nanosheets with enhanced fluorescence at 600 nm. Detailed steady-state and time-resolved emission studies revealed that the reassembly phenomenon was highly selective for dsDNA when compared to single-stranded DNA (ssDNA), which allowed us to use the EB-TFP-iCONs as a 2D fluorescent platform for the label-free detection of complementary DNA strands.

Short-term inhalation study of graphene oxide nanoplates

Graphene oxides possess unique physicochemical properties with important potential applications in electronics, pharmaceuticals, and medicine. However, the toxicity following inhalation exposure to graphene oxide has not yet been clarified. Therefore, this study conducted a short-term graphene oxide inhalation toxicity analysis using a nose-only inhalation exposure system and male Sprague-Dawley rats. A total of four groups (15 rats per group) were exposed: (1) control (fresh air), (2) low concentration (0.76 ± 0.16 mg/m3), (3) moderate concentration (2.60 ± 0.19 mg/m3), and (4) high concentration (9.78 ± 0.29 mg/m3). The rats were exposed to graphene oxide for 6 h/day for 5 days, followed by recovery for 1, 3, and 21 days. No significant body or organ weight changes were noted after the short-term exposure or during the recovery period. Similarly, no significant systemic effects of toxicological importance were noted in the hematological assays, bronchoalveolar lavage fluid (BAL) inflammatory markers, BAL fluid cytokines, or blood biochemical assays following the graphene oxide exposure or during the post-exposure observation period. Moreover, no significant differences were observed in the BAL cell differentials, such as lymphocytes, macrophages, or polymorphonuclear cells. Graphene oxide-ingested alveolar macrophages as a spontaneous clearance reaction were observed in the lungs of all the concentration groups from post 1 day to post 21 days. Histopathological examination of the liver and kidneys did not reveal any significant test-article-relevant histopathological lesions. Importantly, similar to previously reported graphene inhalation data, this short-term nose-only inhalation study found only minimal or unnoticeable graphene oxide toxicity in the lungs and other organs.

Label-free sensitive luminescence biosensor for immunoglobulin G based on Ag6Au6 ethisterone cluster-estrogen receptor α aggregation and graphene

A specific and label-free "on-off-on" luminescence biosensor based on a novel heterometallic cluster [Ag₆Au₆(ethisterone)₁₂]-estrogen receptor α (Ag₆Au₆Eth-ERα) aggregation utilizing graphene oxide (GO) as a quencher to lead a small background signal was firstly constructed to detect immunoglobulin G (IgG) with a simple process and high selectivity. The efficient photoluminescent (PL) Ag₆Au₆Eth-ERα aggregation is strongly quenched by GO. In the presence of IgG, the PL of this system will be restored, and perceivable by human eyes under UV lamp excitation (365 nm). The quenching mechanism of GO on Ag₆Au₆Eth-ERα and enhancement mechanism of IgG on Ag₆Au₆Eth-ERα-GO were investigated in detail. Under the optimum conditions, the biosensor for high sensitive IgG detection expressed a wider linear range of 0.0078-10 ng/mL and a lower detection limit of 0.65 pg/mL with good stability and repeatability, which provided a new approach for label-free IgG detection.

Precise and label-free tumour cell recognition based on a black phosphorus nanoquenching platform

Duplexed recognition of label-free breast cancer cells: a duplexed assay platform based on a BP nanoquencher allows simultaneous detection of two tumor markers within one run.

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.

Graphene-based label-free electrochemical aptasensor for rapid and sensitive detection of foodborne pathogen

Reduced graphene oxide (rGO) has emerged as a promising nanomaterial for reliable detection of pathogenic bacteria due to its exceptional properties such as ultrahigh electron transfer ability, large surface to volume ratio, biocompatibility, and its unique interactions with DNA bases of the aptamer. In this study, rGO-azophloxine (AP) nanocomposite aptasensor was developed for a sensitive, rapid, and robust detection of foodborne pathogens. Besides providing an excellent conductive and soluble rGO nanocomposite, the AP dye also acts as an electroactive indicator for redox reactions. The interaction of the label-free single-stranded deoxyribonucleic acid (ssDNA) aptamer with the test organism, Salmonella enterica serovar Typhimurium (S. Typhimurium), was monitored by differential pulse voltammetry analysis, and this aptasensor showed high sensitivity and selectivity for whole-cell bacteria detection. Under optimum conditions, this aptasensor exhibited a linear range of detection from 10⁸ to 10¹ cfu mL^-1 with good linearity (R ² = 0.98) and a detection limit of 10¹ cfu mL^-1. Furthermore, the developed aptasensor was evaluated with non-Salmonella bacteria and artificially spiked chicken food sample with S. Typhimurium. The results demonstrated that the rGO-AP aptasensor possesses high potential to be adapted for the effective and rapid detection of a specific foodborne pathogen by an electrochemical approach. Graphical abstract Fabrication of graphene-based nanocomposite aptasensor for detection of foodborne pathogen.

Synergistically Enhanced Optical Limiting Property of Graphene Oxide Hybrid Materials Functionalized with Pt Complexes

Recently, graphene-based materials have become well-known nonlinear optical materials for the potential application of laser protection. Two new graphene oxide-platinum  complex (GO-Pt) hybrid materials (GO-Pt-1, GO-Pt-2) have been fabricated through covalent modification and electrostatic adsorption of different Pt complexes with GO. The structural and photophysical properties of the resultant hybrid materials were studied. The nonlinear optical properties and optical power limiting (OPL) performance of Pt complexes, GO, and GO-Pt hybrid materials were investigated by using Z-scan measurements at 532 nm. At the same transmittance, the results illustrate that functionalization of GO makes GO-Pt hybrid materials possess better nonlinear optical properties and OPL performance than individual Pt complexes and GO due to a combination of nonlinear scattering, nonlinear absorption, and photoinduced electron and energy transfer between GO and Pt complex moieties. Furthermore, the nonlinear optics and OPL performance of GO-Pt-2 are better than those of GO-Pt-1, due to not only the excellent optical limiting of Pt-2 and more molecules per area of GO but also the way of combination of Pt-2 and GO.

Covalent Functionalization of Graphene by Nucleophilic Addition Reaction: Synthesis and Optical-Limiting Properties

Covalent functionalization of reduced graphene oxide (rGO) was performed by using conjugated polymers with different monomers through nucleophilic addition of nitrogen anions to rGO. Three conjugated polymers containing tetraphenylethylene, carbazole, and phenyl groups were used, and as a result of π-π interactions and the "polymer-wrapping" effect, the dispersion stability of rGO was improved. Even if the reaction site in the polymers was the same, there were great differences in the reactivities of the polymers, the dispersion stabilities of the resultant composites, and also the optical limiting (OL) performances of the resultant composites. The differences may be attributed to the π-conjugated structure and steric hindrance of the moiety in the polymer skeleton, which has scarcely been reported. Besides, the resultant rGO-P1 and rGO-P3 materials both showed excellent OL responses, even at 4 μJ. This behavior should enable their potential application in photonic and optoelectronic devices to protect human eyes or optical sensors from damage by intense laser irradiation.