Enzyme Reaction in the Pores of CaCO3 Particles upon Ultrasound Disruption of Attached Substrate-Filled Liposomes

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Microchamber arrays made of biodegradable polymers for enzymatic release of small hydrophilic cargos

The encapsulation of small hydrophilic molecules and response to specific biological triggers in a controlled manner have become two of the significant challenges in biomedical research, in particular in the field of localized drug delivery and biosensing. This work reports the fabrication of free-standing microchamber array films made of biodegradable polymers for the encapsulation and enzymatically triggered release of small hydrophilic molecules. Polycaprolactone (PCL) microchamber arrays were demonstrated to fully biodegrade within 5 hours of exposure to lipase from Pseudomonas cepacia (lipase PS) at a concentration of 0.5 mg ml-1, with lower concentrations producing correspondingly longer degradation times. The gradual process of deterioration was real-time monitored utilising laser Fraunhofer diffraction patterns. Additionally, a small hydrophilic molecule, 5(6)-carboxyfluorescein (CF), was loaded into the PCL microchamber arrays in a dry state; however, the substantial permeability of the PCL film led to leakage of the dye molecules. Consequently, polylactic acid (PLA) was blended with PCL to reduce its permeability, enabling blended PCL-PLA (1 : 2 ratio correspondingly) microchamber arrays to trap the small hydrophilic molecule CF. PCL-PLA (1 : 2) microchamber arrays hold potential for controlled release under the catalysis of lipase within 26 hours. Additionally, it is calculated that approximately 11 pg of CF dye crystals was loaded into individual microchambers of 10 μm size, indicating that the microchamber array films could yield a highly efficient encapsulation.

Classification of analytics, sensorics, and bioanalytics with polyelectrolyte multilayer capsules

Polyelectrolyte multilayer (PEM) capsules, constructed by LbL (layer-by-layer)-adsorbing polymers on sacrificial templates, have become important carriers due to multifunctionality of materials adsorbed on their surface or encapsulated into their interior. They have been also been used broadly used as analytical tools. Chronologically and traditionally, chemical analytics has been developed first, which has long been synonymous with all analytics. But it is not the only development. To the best of our knowledge, a summary of all advances including their classification is not available to date. Here, we classify analytics, sensorics, and biosensorics functionalities implemented with polyelectrolyte multilayer capsules and coated particles according to the respective stimuli and application areas. In this classification, three distinct categories are identified: (I) chemical analytics (pH; K⁺, Na⁺, and Pb²⁺ ion; oxygen; and hydrogen peroxide sensors and chemical sensing with surface-enhanced Raman scattering (SERS)); (II) physical sensorics (temperature, mechanical properties and forces, and osmotic pressure); and (III) biosensorics and bioanalytics (fluorescence, glucose, urea, and protease biosensing and theranostics). In addition to this classification, we discuss also principles of detection using the above-mentioned stimuli. These application areas are expected to grow further, but the classification provided here should help (a) to realize the wealth of already available analytical and bioanalytical tools developed with capsules using inputs of chemical, physical, and biological stimuli and (b) to position future developments in their respective fields according to employed stimuli and application areas. Graphical abstract.

Synthesis of Temperature/pH Dual-Stimuli-Response Multicompartmental Microcapsules via Pickering Emulsion for Preprogrammable Payload Release

Stimuli-responsive microcapsules, which can release the encapsulated payload under various environmental stimuli, have attracted great interests of the food, pharmaceutical, cosmetics, and agricultural fields in recent years. However, most reported responsive microcapsules normally have a single storage area and thus load/release only one type of payload under one stimulus. In this work, we fabricated a novel kind of multicompartmental intelligent microcapsule with two storage areas and independently controlled (preprogrammable) releasing behavior under different stimuli via rapid photopolymerization of Pickering emulsions. In our strategy, a temperature-sensitive polymeric (N-isopropyl acrylamide, pNIPAM) particle was prepared and loaded with Nile Red (NR), which was then employed as a Pickering emulsifier to stabilize oil-in-water droplets. The oil was composed of pH-responsive monomers and oil-soluble fluorescent green (OG). Upon exposure to photoirradiation, pH-responsive monomers were polymerized along the interior of the droplets and converted into microcapsules. With NR in the temperature-sensitive pNIPAM@NR particles and OG in the interior of the microcapsules, the as-prepared microcapsules possess dual-carrier capability with two payloads encapsulated dependently in two different compartments. In addition, the microcapsules could respond to two different external stimuli (temperature and pH) and realize the selective and independent release of encapsulated molecules (NR and OG) from the shell and core without any mutual interference. More importantly, the release of NR and OG can be programmed by preprogramming the order of the stimulus responses, which can be altered. Our work develops a simple and effective strategy to fabricate responsive multicompartment microcapsules with preprogrammable release of different molecules.

Synthesis of Polymer Assembled Mesoporous CaCO3 Nanoparticles for Molecular Targeting and pH-Responsive Controlled Drug Release

CaCO3 nanoparticles are very suitable as intelligent carriers because of their ideal biocompatibility and biodegradability, especially their sensitivity to pH. In this paper, we use mesoporous CaCO3 nanoparticles as intelligent carrier, sodium alginate, and chitosan as alternating assembly materials, folic acid as target molecules, and exploit layer-by-layer assembly technology to achieve sensitive molecular targeting and pH response drug release. Mesoporous CaCO3 hybrid nanoparticles have high drug loading on doxorubicin. The effects of different pH values on drug release in vitro were studied by regulating simulated body fluids with different pH values. The cytotoxicity, targeting effect, and drug release of human cervical cancer cell line (HeLa) were studied by cell vitality and imaging experiments. All the evidence suggests that the smart mesoporous CaCO3 nanoparticles may be a potential clinical application platform for cancer therapy.

Organic-inorganic nanoflowers: from design strategy to biomedical applications

Organic-inorganic hybrid nanoflowers (NF) with sizes or features on a nanoscale are a class of flower-shaped nanomaterials self-assembled from metal ions and organic components. Here, to be more specific, the organic components mainly refer to biomolecules ranging from proteins, peptides, and amino acids to DNA/RNA. Beyond their pleasing aesthetics, their unique properties and integrated functions have attracted widespread interest and made them promising candidates in the application of biomedical areas. Great efforts have been made to design and synthesize versatile functional hybrid nanoflowers. In this review, we begin with the clarification of versatile recently reported hybrid nanoflowers according to the types of metal ions and biomolecules employed. To highlight the design of organic-inorganic hybrid nanoflowers, their synthetic methods and mechanisms, structural and biological characteristics are discussed. After that, the state-of-the-art applications of hybrid nanoflowers in biomedical fields including biosensing, biocatalysis, and cancer therapy are demonstrated. In the end, we discuss the prospects of organic-inorganic hybrid nanoflowers and highlight the challenges and opportunities for future research.

Proton-consumed nanoarchitectures toward sustainable and efficient photophosphorylation

At present, photophosphorylation in natural or artificial systems is accomplished by the production of protons or their pumping across the biomembranes. Herein, different from this strategy above, we demonstrate a designed system which can effectively enhance photophosphorylation by photo-induced proton-scavenging through molecular assembly. Upon the introduction of photobase generators, a (photo-) chemical reaction occurs to produce hydroxyl ions. Accompanying the further extramembranous acid-base neutralization reaction, an outbound flow of protons is generated to drive the reconstituted adenosine triphosphate (ATP) synthase to produce ATP. That is, contrary to biochemistry, the proton gradient to drive photophosphorylation derives from the scavenging of protons present in the external medium by hydroxyl ions, produced by the partially photo-induced splitting of photobase generator. Such assembled system holds great potential in ATP-consuming bioapplications.

Progress of Multicompartmental Particles for Medical Applications

Particulate materials are becoming increasingly used in the literature for medical applications, but translation to the clinical setting has remained challenging as many particle systems face challenges from in vivo barriers. Multicompartmental particles that can incorporate several materials in an individual particle may allow for more intricate control and addressing of issues that otherwise standard particles are unable to. Here, some of the advances made in the use of multicompartmental particles for medical applications are briefly described.

Phototriggered N2-Generating Submicron Particles for Selective Killing of Cancer Cells

Killing of cancer cells by applying mechanical disruption has been an appealing emerging strategy for cancer treatment in recent years. In this study, photoresponsive submicron particles based on diazo-resin that are able to release N₂ under UV irradiation were prepared through a polyamine-salt aggregation method. After surface modification with hyaluronic acid, the particles could be internalized selectively by cancer cells and were mainly located in lysosomes after 6 h incubation. The viability of cancer cells decreased obviously after they were co-cultured with photoresponsive particles and UV irradiation due to the integrity damage of lysosomes by phototriggered N₂ generation and the subsequent increased number of reactive oxygen species.

Enhanced Photophosphorylation of a Chloroplast-Entrapping Long-Lived Photoacid

Enhancing solar energy conversion efficiency is very important for developing renewable energy, protecting the environment, and producing agricultural products. Efficient enhancement of photophosphorylation is demonstrated by coupling artificial photoacid generators (PAGs) with chloroplasts. The encapsulation of small molecular long-lived PAGs in the thylakoid lumen is improved greatly by ultrasonication. Under visible-light irradiation, a fast intramolecular photoreaction of the PAG occurs and produces many protons, remarkably enhancing the proton gradient in situ. Consequently, compared to pure chloroplasts, the assembled natural-artificial hybrid demonstrates approximately 3.9 times greater adenosine triphosphate (ATP) production. This work will provide new opportunities for constructing enhanced solar energy conversion systems.

Polymeric and Lipid Membranes-From Spheres to Flat Membranes and vice versa

Membranes are important components in a number of systems, where separation and control of the flow of molecules is desirable. Controllable membranes represent an even more coveted and desirable entity and their development is considered to be the next step of development. Typically, membranes are considered on flat surfaces, but spherical capsules possess a perfect "infinite" or fully suspended membranes. Similarities and transitions between spherical and flat membranes are discussed, while applications of membranes are also emphasized.

Silver Alginate Hydrogel Micro- and Nanocontainers for Theranostics: Synthesis, Encapsulation, Remote Release, and Detection

We have designed multifunctional silver alginate hydrogel microcontainers referred to as loaded microcapsules with different sizes by assembling them via a template assisted approach using natural, highly porous calcium carbonate cores. Sodium alginate was immobilized into the pores of calcium carbonate particles of different sizes followed by cross-linking via addition of silver ions, which had a dual purpose: on one hand, the were used as a cross-linking agent, albeit in the monovalent form, while on the other hand they have led to formation of silver nanoparticles. Monovalent silver ions, an unusual cross-linking agent, improve the sensitivity to ultrasound, lead to homogeneous distribution of silver nanoparticles. Silver nanoparticles appeared on the shell of the alginate microcapsules in the twin-structure as determined by transmission electron microscopy. Remote release of a payload from alginate containers by ultrasound was found to strongly depend on the particle size. The possibility to use such particles as a platform for label-free molecule detection based on the surface enhanced Raman scattering was demonstrated. Cytotoxicity and cell uptake studies conducted in this work have revealed that microcontainers exhibit nonessential level of toxicity with an efficient uptake of cells. The above-described functionalities constitute building blocks of a theranostic system, where detection and remote release can be achieved with the same carrier.

An enhanced chemiluminescence bioplatform by confining glucose oxidase in hollow calcium carbonate particles

A chemiluminescence (CL) amplification platform based on HCC/Lucigenin&GOx (HLG) film was developed. Hollow structural calcium carbonate (HCC) particles were used as alternative materials for carrying both enzyme and CL reagent. The model enzyme (GOx), immobilized in confined space of HCC particles, exhibited an improved biocatalysis. The Michaelis constant (Km) and the enzymatic rate constant (kcat) were determined to be 0.209 μM and 2.21 s(-1), respectively, which are much better than those of either free GOx in aqueous solution or the GOx immobilized on common nanomaterials. Based on the HLG platform, CL signal was effectively amplified and visualized after adding trace glucose, which could be attributed to the HCC particles' high biocompatibility, large specific surface area, attractive interfacial properties and efficient interaction with analyses. The visual CL bioplatform showed an excellent performance with high selectivity, wide linear range and low detection limit for sensing trace glucose. Because it eliminates the need of complicated assembly procedure and enables visualization by the naked eye, the sensitive and selective CL bioplatform would provide wide potential applications in disease diagnosis and food safety.

Hollow silver alginate microspheres for drug delivery and surface enhanced Raman scattering detection

Multifunctional silver alginate hydrogel microspheres are assembled via a template assisted approach using calcium carbonate cores.

Cellular uptake of poly(allylamine hydrochloride) microcapsules with different deformability and its influence on cell functions

It is important to understand the safety issue and cell interaction pattern of polyelectrolyte microcapsules with different deformability before their use in biomedical applications. In this study, SiO2, poly(sodium-p-styrenesulfonate) (PSS) doped CaCO3 and porous CaCO3 spheres, all about 4μm in diameter, were used as templates to prepare microcapsules with different inner structure and subsequent deformability. As a result, three kinds of covalently assembled poly(allylaminehydrochloride)/glutaraldehyde (PAH/GA) microcapsules with similar size but different deformability under external osmotic pressure were prepared. The impact of different microcapsules on cell viability and functions are studied using smooth muscle cells (SMCs), endothelial cells (ECs) and HepG2 cells. The results demonstrated that viabilities of SMCs, ECs and HepG2 cells were not significantly influenced by either of the three kinds of microcapsules. However, the adhesion ability of SMCs and ECs as well as the mobility of SMCs, ECs and HepG2 cells were significantly impaired after treatment with microcapsules in a deformability dependent manner, especially the microcapsules with lower deformability caused higher impairment on cell functions. The cellular uptake kinetics, uptake pathways, intracellular distribution of microcapsules are further investigated in SMCs to reveal the potential mechanism. The SMCs showed faster uptake rate and exocytosis rate of microcapsules with lower deformability (Cap@CaCO3/PSS and Cap@CaCO3), leading to higher intracellular accumulation of microcapsules with lower deformability and possibly larger retardation of cell functions. The results pointed out that the deformability of microcapsules is an important factor governing the biological performance of microcapsules, which requires careful adjustment for further biomedical applications.

The influence of the size and aspect ratio of anisotropic, porous CaCO3 particles on their uptake by cells

BACKGROUND

Recent reports highlighting the role of particle geometry have suggested that anisotropy can affect the rate and the pathway of particle uptake by cells. Therefore, we investigate the internalization by cells of porous calcium carbonate particles with different shapes and anisotropies.

RESULTS

We report here on a new method of the synthesis of polyelectrolyte coated calcium carbonate particles whose geometry was controlled by varying the mixing speed and time, pH value of the reaction solution, and ratio of the interacting salts used for particle formation. Uptake of spherical, cuboidal, ellipsoidal (with two different sizes) polyelectrolyte coated calcium carbonate particles was studied in cervical carcinoma cells. Quantitative data were obtained from the analysis of confocal laser scanning microscopy images.

CONCLUSIONS

Our results indicate that the number of internalized calcium carbonate particles depends on the aspect ratio of the particle, whereby elongated particles (higher aspect ratio) are internalized with a higher frequency than more spherical particles (lower aspect ratio). The total volume of internalized particles scales with the volume of the individual particles, in case equal amount of particles were added per cell.

Inorganic microcapsules mineralized at the interface of water droplets in ethanol solution and their application as drug carriers

A crystallization – dissolution – interface mineralization (CDIM) method was reported to synthesize pH biocompatible and sensitive calcium carbonate (CaC) and calcium phosphate (CaP) inorganic microcapsules with potential on drug delivery.

Pharmacological aspects of release from microcapsules - from polymeric multilayers to lipid membranes

This review is devoted to pharmacological applications of principles of release from capsules to overcome the membrane barrier. Many of these principles were developed in the context of polymeric multilayer capsule membrane modulation, but they are also pertinent to liposomes, polymersomes, capsosomes, particles, emulsion-based carriers and other carriers. We look at these methods from the physical, chemical or biological driving mechanisms point of view. In addition to applicability for carriers in drug delivery, these release methods are significant for another area directly related to pharmacology - modulation of the permeability of the membranes and thus promoting the action of drugs. Emerging technologies, including ionic current monitoring through a lipid membrane on a nanopore, are also highlighted.

Colloidal micro- and nano-particles as templates for polyelectrolyte multilayer capsules

Colloidal particles play an important role in various areas of material and pharmaceutical sciences, biotechnology, and biomedicine. In this overview we describe micro- and nano-particles used for the preparation of polyelectrolyte multilayer capsules and as drug delivery vehicles. An essential feature of polyelectrolyte multilayer capsule preparations is the ability to adsorb polymeric layers onto colloidal particles or templates followed by dissolution of these templates. The choice of the template is determined by various physico-chemical conditions: solvent needed for dissolution, porosity, aggregation tendency, as well as release of materials from capsules. Historically, the first templates were based on melamine formaldehyde, later evolving towards more elaborate materials such as silica and calcium carbonate. Their advantages and disadvantages are discussed here in comparison to non-particulate templates such as red blood cells. Further steps in this area include development of anisotropic particles, which themselves can serve as delivery carriers. We provide insights into application of particles as drug delivery carriers in comparison to microcapsules templated on them.

CaCO₃ templated micro-beads and -capsules for bioapplications

Porous CaCO₃ vaterite microparticles have been introduced a decade ago as sacrificial cores and becoming nowadays as one of the most popular templates to encapsulate bioactive molecules. This is due to the following beneficial features: i) mild decomposition conditions, ii) highly developed surface area, and iii) controlled size as well as easy and chip preparation. Such properties allow one to template and design particles with well tuned material properties in terms of composition, structure, functionality -- the parameters crucially important for bioapplications. This review presents a recent progress in utilizing the CaCO₃ cores for the assembly of micrometer-sized beads and capsules with encapsulated both small drugs and large biomacromolecules. Bioapplications of all the particles for drug delivery, biotechnology, and biosensing as well as future perspectives for templating are addressed.

25th anniversary article: Artificial carbonate nanocrystals and layered structural nanocomposites inspired by nacre: synthesis, fabrication and applications

Rigid biological systems are increasingly becoming a source of inspiration for the fabrication of next generation advanced functional materials due to their diverse hierarchical structures and remarkable engineering properties. Among these rigid biomaterials, nacre, as the main constituent of the armor system of seashells, exhibiting a well-defined 'brick-and-mortar' architecture, excellent mechanical properties, and interesting iridescence, has become one of the most attractive models for novel artificial materials design. In this review, recent advances in nacre-inspired artificial carbonate nanocrystals and layered structural nanocomposites are presented. To clearly illustrate the inspiration of nacre, the basic principles relating to plate-like aragonite single-crystal growth and the contribution of hierarchical structure to outstanding properties in nacre are discussed. The inspiration of nacre for the synthesis of carbonate nanocrystals and the fabrication of layered structural nanocomposites is also discussed. Furthermore, the broad applications of these nacre inspired materials are emphasized. Finally, a brief summary of present nacre-inspired materials and challenges for the next generation of nacre-inspired materials is given.

Towards intelligent bioreactor systems: triggering the release and mixing of compounds based on DNA-functionalized hybrid hydrogel

We have designed and synthesized an intelligent DNA-functionalized hydrogel bioreactor system that can be controlled by external stimuli.

Towards theranostic multicompartment microcapsules: in-situ diagnostics and laser-induced treatment

Paving the way towards the application of polyelectrolyte multilayer capsules in theranostics, we describe diagnostic multi-functionality and drug delivery using multicompartment polymeric capsules which represent the next generation of drug delivery carriers. Their versatility is particularly important for potential applications in the area of theranostics wherein the carriers are endowed with the functionality for both diagnostics and therapy. Responsiveness towards external stimuli is attractive for providing controlled and on-demand release of encapsulated materials. An overview of external stimuli is presented with an emphasis on light as a physical stimulus which has been widely used for activation of microcapsules and release of their contents. In this article we also describe existing and new approaches to build multicompartment microcapsules as well as means available to achieve controlled and triggered release from their subcompartments, with a focus on applications in theranostics. Outlook for future directions in the area are highlighted.

NIR-activated content release from plasmon resonant liposomes for probing single-cell responses

Technological limitations have prevented the interrogation and manipulation of cellular activity in response to bioactive molecules within model and living systems that is required for the development of diagnostic and treatment modalities for diseases, such as cancer. In this work, we demonstrate that gold-coated liposomes are capable of encapsulation and on-demand release of signaling molecules with a spatial and temporal resolution leading to activation of individual cells. As a model system, we used cells modified to overexpress a certain G-protein coupled receptor, the CCK2 receptor, and achieved its activation in a single cell via the localized release of its agonist. This content release was triggered by illumination of the liposomes at wavelengths corresponding to the plasmon resonance of the gold coating. The use of plasmon resonant liposomes may enable on-demand release of a broad range of molecules using biologically safe near-infrared light and without molecule chemical modification. In combination with the spectral tunability of plasmon resonant coating, this technology may allow for multiplexed interrogation of complex and diverse signaling pathways in model or living tissues with unprecedented spatial and temporal control.

Red blood cells and polyelectrolyte multilayer capsules: natural carriers versus polymer-based drug delivery vehicles

INTRODUCTION

Red blood cells (RBCs) and lipid-based carriers on the one hand and polymeric capsules on the other hand represent two of the most widely used carriers in drug delivery. Each class of these carriers has its own set of properties, specificity and advantages. Thorough comparative studies of such systems are reported here for the first time.

AREAS COVERED

In this review, RBCs are described in comparison with synthetic polymeric drug delivery vehicles using polyelectrolyte multilayer capsules as an example. Lipid-based composition of the shell in the former case is particularly attractive due to their inherent biocompatibility and flexibility of the carriers. On the other hand, synthetic approaches to fabrication of polyelectrolyte multilayer capsules permit manipulation of the permeability of their shell as well as tuning their composition, mechanical properties, release methods and targeting.

EXPERT OPINION

In conclusion, properties of RBCs and polyelectrolyte multilayer capsules are reported here highlighting similarities and differences in their preparation and applications. In addition, their advantages and disadvantages are discussed.

Controlled enzyme-catalyzed degradation of polymeric capsules templated on CaCO₃: influence of the number of LbL layers, conditions of degradation, and disassembly of multicompartments

Enzyme-catalyzed degradation of CaCO₃-templated capsules is presented. We investigate a) biodegradable, b) mixed biodegradable/synthetic, and c) multicompartment polyelectrolyte multilayer capsules with different numbers of polymer layers. Using confocal laser scanning microscopy we observed the kinetics of the non-specific protease Pronase-induced degradation of capsules is slowed down on the order of hours by either increasing the number of layers in the wall of biodegradable capsules, or by inserting synthetic polyelectrolyte multilayers into the shell comprised of biodegradable polymers. The degradation rate increases with the concentration of Pronase. Controlled detachment of subcompartments of multicompartment capsules, with potential for intracellular delivery or in-vivo applications, is also shown.

Inhibition of human neutrophil elastase by α1-antitrypsin functionalized colloidal microcarriers

Layer-by-layer (LbL)-coated microcarriers offer a good opportunity as transport systems for active agents into specific cells and tissues. The assembling of oppositely charged polyelectrolytes enables a modular construction of the carriers and therefore an optimized integration and application of drug molecules. Here, we report the multilayer incorporation and transport of α(1)-antitrypsin (AT) by colloidal microcarriers. AT is an anti-inflammatory agent and shows inhibitory effects toward its pro-inflammatory antagonist, human neutrophil elastase (HNE). The highly proteolytic enzyme HNE is released by polymorphonuclear leukocytes (PMNs) during inflammatory processes and can cause host tissue destruction and pain. The high potential of this study is based on a simultaneous intra- and extracellular application of AT-functionalized LbL carriers. Carrier application in PMNs results in significant HNE inhibition within 21 h. Microcarriers phagocytosed by PMNs were time dependently decomposed inside phagolysosomes, which enables the step-by-step release of AT. Here, AT inactivates HNE before being released, which avoids a further HNE concentration increase in the extracellular space and, subsequently, reduces the risk of further tissue destruction. Additionally, AT surface-functionalized microcarriers allow the inhibition of already released HNE in the extracellular space. Finally, this study demonstrates the successful application of LbL carriers for a concurrent extra- and intracellular HNE inhibition aiming the rebalancing of protease and antiprotease concentrations and the subsequent termination of chronic inflammations.

Designing multilayered particulate systems for tunable drug release profiles

Triple-layered microparticles comprising poly(D,L-lactide-co-glycolide, 50:50) (PLGA), poly(L-lactide) (PLLA) and poly(ethylene-co-vinyl acetate, 40 wt.% vinyl acetate) (EVA) were fabricated using a one-step solvent evaporation technique, with ibuprofen drug localized in the EVA core. The aim of this study was to investigate the drug release profiles of these triple-layered microparticles in comparison to double-layered (PLLA/EVA and PLGA/EVA) (shell/core) and single-layered EVA microparticles. Double- and triple-layered microparticles were shown to eliminate burst release otherwise observed for single-layered microparticles. For triple-layered microparticles, the migration of acidic PGA oligomers from the PLGA shell accelerated the degradation of the PLLA mid-layer and subsequently enhanced drug release in comparison to double-layered PLLA/EVA microparticles. Further studies showed that drug release rates can be altered by changing the layer thicknesses of the triple-layered microparticles, and through specific tailoring of layer thicknesses, a zero-order release can be achieved. This study therefore provides important mechanistic insights into how the distinctive structural attributes of triple-layered microparticles can be tuned to control the drug release profiles.