Biopolymer-Based Multilayer Capsules and Beads Made via Templating: Advantages, Hurdles and Perspectives

One of the undeniable trends in modern bioengineering and nanotechnology is the use of various biomolecules, primarily of a polymeric nature, for the design and formulation of novel functional materials for controlled and targeted drug delivery, bioimaging and theranostics, tissue engineering, and other bioapplications. Biocompatibility, biodegradability, the possibility of replicating natural cellular microenvironments, and the minimal toxicity typical of biogenic polymers are features that have secured a growing interest in them as the building blocks for biomaterials of the fourth generation. Many recent studies showed the promise of the hard-templating approach for the fabrication of nano- and microparticles utilizing biopolymers. This review covers these studies, bringing together up-to-date knowledge on biopolymer-based multilayer capsules and beads, critically assessing the progress made in this field of research, and outlining the current challenges and perspectives of these architectures. According to the classification of the templates, the review sequentially considers biopolymer structures templated on non-porous particles, porous particles, and crystal drugs. Opportunities for the functionalization of biopolymer-based capsules to tailor them toward specific bioapplications is highlighted in a separate section.

Porous antibody-containing protein microparticles as novel carriers for ELISA

A new strategy for ELISA-based detection in small volumes based on porous antibody-containing protein microparticles was developed and employed for the determination of human immunoglobulin G demonstrating both increase in sensitivity and decrease in antibody consumption by ten times compared to a conventional planar ELISA.

Photo-induced synthesis of molybdenum oxide quantum dots for surface-enhanced Raman scattering and photothermal therapy

By means of a simple and photo-induced method, four colors of molybdenum oxide quantum dots (MoO_x QDs) have been synthesized, using Mo(CO)₆ as the structural guiding agent and molybdenum source. The as-prepared MoO_x QDs display diverse optical properties due to the different configurations of oxygen vacancies in various nanostructures. Among them, crystalline molybdenum dioxide (MoO₂) with a deep blue color shows the most intense localized surface plasmon resonance effect in the near-infrared (NIR) region. The strong NIR absorption endows MoO₂ QDs with a high photothermal conversion efficiency of 66.3%, enabling broad prospects as a photo-responsive nanoagent for photothermal therapy of cancer. Moreover, MoO₂ QDs can also serve as a novel semiconductor substrate for ultrasensitive surface-enhanced Raman scattering (SERS) analysis of aromatic molecules, amino acids and antibiotics, with SERS performance comparable to that of noble metal-based substrates. The therapeutic applications of MoO₂ QDs open up a new avenue for tumor nanomedicine.

Hybrids of Polymer Multilayers, Lipids, and Nanoparticles: Mimicking the Cellular Microenvironment

Here we address research directions and trends developed following novel concepts in 2D/3D self-assembled polymer structures established in the department led by Helmuth Möhwald. These functional structures made of hybrids of polymer multilayers, lipids, and nanoparticles stimulated research in the design of the cellular microenvironment. The composition of the extracellular matrix (ECM) and dynamics of biofactor presentation in the ECM can be recapitulated by the hybrids. Proteins serve as models for protein-based biofactors such as growth factors, cytokines, hormones, and so forth. A fundamental understanding of complex intermolecular interactions and approaches developed for the externally IR-light-triggered release offers a powerful tool for controlling the biofactor presentation. Pure protein beads made via a mild templating on vaterite CaCO₃ crystals can mimic cellular organelles in terms of the compartmentalization of active proteins. We believe that an integration of the approaches developed and described here offers a strong tool for engineering and mimicking both extra- and intracellular microenvironments.

Porous Alginate Scaffolds Assembled Using Vaterite CaCO3 Crystals

Formulation of multifunctional biopolymer-based scaffolds is one of the major focuses in modern tissue engineering and regenerative medicine. Besides proper mechanical/chemical properties, an ideal scaffold should: (i) possess a well-tuned porous internal structure for cell seeding/growth and (ii) host bioactive molecules to be protected against biodegradation and presented to cells when required. Alginate hydrogels were extensively developed to serve as scaffolds, and recent advances in the hydrogel formulation demonstrate their applicability as "ideal" soft scaffolds. This review focuses on advanced porous alginate scaffolds (PAS) fabricated using hard templating on vaterite CaCO3 crystals. These novel tailor-made soft structures can be prepared at physiologically relevant conditions offering a high level of control over their internal structure and high performance for loading/release of bioactive macromolecules. The novel approach to assemble PAS is compared with traditional methods used for fabrication of porous alginate hydrogels. Finally, future perspectives and applications of PAS for advanced cell culture, tissue engineering, and drug testing are discussed.

A Simple Non-Invasive Approach toward Efficient Transdermal Drug Delivery Based on Biodegradable Particulate System

Transdermal administration via skin appendages enables both localized and systemic drug delivery, as well as minimizes incidental toxicity. However, the design of an appropriate effective method for clinical use remains challenging. Here, we introduce calcium carbonate-based carriers for the transdermal transportation of bioactive substances. The proposed system presents easily manufacturable biodegradable particles with a large surface area enabling a high payload ability. Topical application of submicron porous CaCO₃ particles in rats followed by the therapeutic ultrasound treatment results in their deep penetration through the skin along with plentiful filling of the hair follicles. Exploiting the loading capacity of the porous particles, we demonstrate efficient transportation of a fluorescent marker along the entire depth of the hair follicle down the bulb region. In vivo monitoring of the carrier degradation reveals the active dissolution/recrystallization of CaCO₃ particles, resulting in their total resorption within 12 days. The proposed particulate system serves as an intrafollicular depot for drug storage and prolonged in situ release over this period. The urinary excretion profile proves the systemic absorption of the fluorescent marker. Hence, the elaborated transdermal delivery system looks promising for medical applications. The drug delivery to different target regions of the hair follicle may contribute to regenerative medicine, immunomodulation, and treatment of various skin disorders. In the meantime, the systemic uptake of the transported drug opens an avenue for prospective delivery routes beyond the scope of dermatology.

Composite materials based on Ag nanoparticles in situ synthesized on the vaterite porous matrices

We have designed sensors based on Ag nanoparticles synthesized in situ on the vaterite beads. In this article we demonstrate an approach to produce size controllable spherical and elliptical vaterite particles and discuss time-dependent in situ Ag nanoparticles synthesis and its potential effect on surface-enhanced Raman scattering. The time dependent silver reduction synthesis in inorganic porous particles allows to regulate the number and size of Ag nanoparticles. It is shown that the irregular surface and high porosity of vaterite particles and large amount (surface filling factor) of the Ag nanoparticles are the critical parameters to increase the SERS signal to 10⁴ times. Such inorganic composites have a huge potential in medical applications; soon they provide an opportunity to study intracellular processes in vivo. The detailed characterization of the microstructure of these composites was studied by scanning and transmission electron microscopy, including 3D visualization and energy dispersive x-ray microanalysis.

Intraparticle FRET for Enhanced Efficiency of Two-Photon Activated Photodynamic Therapy

Photodynamic therapy (PDT) still faces two main problems on cancer therapy. One is how to improve PDT efficiency against hypoxic environment of tumors. The other one is how to overcome the limit of short wavelength light to increase PDT treatment depth. In this work, an intraparticle fluorescence resonance energy transfer (FRET) platform is designed to address these problems together. The nanoparticles are doped with multicomponents, such as catalase, two-photon dyes, and traditional photosensitizers, with a simple "one-pot" and green method. On the one hand, catalase can catalyze intracellular H₂ O₂ into O₂ and promote PDT efficiency. One the other hand, photosensitizers can be excited indirectly by two-photon lasers through an intraparticle FRET mechanism, which results in deeper tissue penetration for PDT. These properties are verified through the material induced cytotoxicity in light or in dark and in vivo blocking blood-vessel experiment.

Preparation of Novel Nano-Sized Hydrogel Microcapsules via Layer-By-Layer Assembly as Delivery Vehicles for Drugs onto Hygiene Paper

Hydrogel microcapsules are improved transplantation delivery vehicles for pharmaceuticals by effectively segregating the active ingredients from the surroundings and delivering them to a certain target site. Layer-by-layer (LbL) assembly is an attractive process to fabricate the nano-sized hydrogel microcapsules. In this study, nano-sized hydrogel microcapsules were prepared through LbL assembly using calcium carbonate nanoparticles (CaCO₃ NPs) as the sacrificial inorganic template, sodium alginate (SA) and polyethyleneimine (PEI) as the shell materials. Ciprofloxacin was used to study the encapsulation and release properties of the hydrogel microcapsules. The hydrogel microcapsules were further adsorbed onto the paper to render antimicrobial properties. The results showed that the mean size of the CaCO₃ template was reduced after dispersing into sodium n-dodecyl sulfate (SDS) solution under sonication. Transmission electron microscope (TEM) and atomic force microscope (AFM) revealed that some hydrogel microcapsules had a diameter under 200 nm, typical creases and collapses were found on the surface. The nano-sized PEI/SA hydrogel microcapsules showed high loading capacity of ciprofloxacin and a sustained release. PEI/SA hydrogel microcapsules rendered good antimicrobial properties onto the paper by the adsorption of hydrogel microcapsules, however, the mechanical properties of the hygiene paper were decreased.

Integrated Experimental and Modeling Study of Enzymatic Degradation Using Novel Autofluorescent BSA Microspheres

Autofluorescent bovine serum albumin (BSA) hydrogel microspheres were prepared through the spray-drying of glutaraldehyde cross-linked BSA nanoparticles and then used for a proteinase K based degradation study in an aqueous solution. Experimental results and empirical models are presented to characterize the kinetics of BSA hydrogel microsphere degradation, as well as the accompanying release of synthesized fluorophore. The BSA gel degradation dynamics is primarily controlled by the concentration of proteinase K within the Tris buffer. The coupling of swelling dynamics and the transient distributions of fluorophore are traced by confocal microscopy. Models are developed based on the linear theory of elastic deformation coupled to enzyme and fluorophore transport. This study represents a fundamental investigation of the degradation and release kinetics of protein-based materials, which can potentially be applied for the dynamic and photostable tracking of relevant in vivo systems.

A facile and efficient strategy to encapsulate the model basic protein lysozyme into porous CaCO3

A method to load lysozyme, a model of basic protein, with high efficiency and high capacity has been developed by doping heparin into porous CaCO₃ particles. Choosing suitable polyelectrolyte pairs during the layer-by-layer capsule fabrication process avoided losing the loaded lysozyme, and fully retained the bioactivity.

Hybrid PCL/CaCO3 scaffolds with capabilities of carrying biologically active molecules: Synthesis, loading and in vivo applications

Designing advanced biomaterials for tissue regeneration with drug delivery and release functionalities remains a challenge in regenerative medicine. In this research, we have developed novel composite scaffolds based on polymeric polycaprolactone fibers coated with porous calcium carbonate structures (PCL/CaCO₃) for tissue engineering and have shown their drug delivery and release in rats. In vivo biocompatibility tests of PCL/CaCO₃ scaffolds were complemented with in vivo drug release study, where tannic acid (TA) was used as a model drug. Release of TA from the scaffolds was realized by recrystallization of the porous vaterite phase of calcium carbonate into the crystalline calcite. Cell colonization and tissue vascularization as well as transplantability of developed PCL/CaCO₃+TA scaffolds were observed. Detailed study of scaffold transformations during 21-day implantation period was followed by scanning electron microscopy and X-ray diffraction studies before and after in vivo implantation. The presented results demonstrate that PCL/CaCO₃ scaffolds are attractive candidates for implants in bone regeneration and tissue engineering with a possibility of loading biologically active molecules and controlled release.

Silver Alginate Hydrogel Micro- and Nanocontainers for Theranostics: Synthesis, Encapsulation, Remote Release, and Detection

We have designed multifunctional silver alginate hydrogel microcontainers referred to as loaded microcapsules with different sizes by assembling them via a template assisted approach using natural, highly porous calcium carbonate cores. Sodium alginate was immobilized into the pores of calcium carbonate particles of different sizes followed by cross-linking via addition of silver ions, which had a dual purpose: on one hand, the were used as a cross-linking agent, albeit in the monovalent form, while on the other hand they have led to formation of silver nanoparticles. Monovalent silver ions, an unusual cross-linking agent, improve the sensitivity to ultrasound, lead to homogeneous distribution of silver nanoparticles. Silver nanoparticles appeared on the shell of the alginate microcapsules in the twin-structure as determined by transmission electron microscopy. Remote release of a payload from alginate containers by ultrasound was found to strongly depend on the particle size. The possibility to use such particles as a platform for label-free molecule detection based on the surface enhanced Raman scattering was demonstrated. Cytotoxicity and cell uptake studies conducted in this work have revealed that microcontainers exhibit nonessential level of toxicity with an efficient uptake of cells. The above-described functionalities constitute building blocks of a theranostic system, where detection and remote release can be achieved with the same carrier.

Non-covalent assembly of poly(allylamine hydrochloride)/triethylamine microcapsules with ionic strength-responsiveness and auto-fluorescence

Ionic strength-responsive microcapsules with auto-fluorescence were fabricated by incubation of poly(allylamine hydrochloride) (PAH)-doped CaCO₃ particles in triethylamine (Et₃N), followed by core removal using HCl. Based on the combination of hydrophobic interaction and hydrogen bonding, PAH and Et₃N formed a complex with a molar ratio of 3:1 (repeating unit of PAH: Et₃N). The as-prepared capsules showed extraordinary stability against 1M HCl, 1M NaOH and 6M urea solutions, and could swell or shrink reversibly in response to the ionic strength. Furthermore, the capsules possessed auto-fluorescence, allowing easily tracking of capsules during applications. Such interaction may be expanded to formation of stimuli-responsive multilayer films and other colloidal particles.

The solid-phase extraction of α-chymotrypsin based on a novel porous polymeric dianionic ionic liquid-coated magnetic material

A novel magnetic solid-phase extraction (MSPE) method based on carboxymethylcellulose sodium modified Fe₃O₄ nanocomposite coated with porous polymeric dianionic ionic liquid (Fe₃O₄@CMC@PPDIL) was proposed and applied to extracting α-chymotrypsin.

Loading Capacity versus Enzyme Activity in Anisotropic and Spherical Calcium Carbonate Microparticles

A new method of fabrication of calcium carbonate microparticles of ellipsoidal, rhomboidal, and spherical geometries is reported by adjusting the relative concentration ratios of the initial salt solutions and/or the ethylene glycol content in the reaction medium. Morphology, porosity, crystallinity, and loading capacity of synthesized CaCO3 templates were characterized in detail. Particles harboring dextran or the enzyme guanylate kinase were obtained through encapsulation of these macromolecules using the layer-by-layer assembly technique to deposit positively and negatively charged polymers on these differently shaped CaCO3 templates and were characterized by confocal laser scanning fluorescence microscopy, fluorometric techniques, and enzyme activity measurements. The enzymatic activity, an important application of such porous particles and containers, has been analyzed in comparison with the loading capacity and geometry. Our results reveal that the particles' shape influences morphology of particles and that, as a result, affects the activity of the encapsulated enzymes, in addition to the earlier reported influence on cellular uptake. These particles are promising candidates for efficient drug delivery due to their relatively high loading capacity, biocompatibility, and easy fabrication and handling.

Controlling the Vaterite CaCO3 Crystal Pores. Design of Tailor-Made Polymer Based Microcapsules by Hard Templating

The spherical vaterite CaCO3 microcrystals are nowadays widely used as sacrificial templates for fabrication of various microcarriers made of biopolymers (e.g., proteins, nucleic acids, enzymes) due to porous structure and mild template elimination conditions. Here, we demonstrated for the first time that polymer microcarriers with tuned internal nanoarchitecture can be designed by employing the CaCO3 crystals of controlled porosity. The layer-by-layer deposition has been utilized to assemble shell-like (hollow) and matrix-like (filled) polymer capsules due to restricted and free polymer diffusion through the crystal pores, respectively. The crystal pore size in the range of few tens of nanometers can be adjusted without any additives by variation of the crystal preparation temperature in the range 7-45 °C. The temperature-mediated growth mechanism is explained by the Ostwald ripening of nanocrystallites forming the crystal secondary structure. Various techniques including SEM, AFM, CLSM, Raman microscopy, nitrogen adsorption-desorption, and XRD have been employed for crystal and microcapsule analysis. A three-dimensional model is introduced to describe the crystal internal structure and predict the pore cutoff and available surface for the pore diffusing molecules. Inherent biocompatibility of CaCO3 and a possibility to scale the porosity in the size range of typical biomacromolecules make the CaCO3 crystals extremely attractive tools for template assisted designing tailor-made biopolymer-based architectures in 2D to 3D targeted at drug delivery and other bioapplications.

Hollow silver alginate microspheres for drug delivery and surface enhanced Raman scattering detection

Multifunctional silver alginate hydrogel microspheres are assembled via a template assisted approach using calcium carbonate cores.

Synthesis of nanostructured calcium carbonate/methotrexate@silica and its application in cancer therapy

Both ACC-MTX@SiO₂ and vaterite-MTX@SiO₂ nanospheres were synthesized at different pH values. The results indicated that ACC-MTX@SiO₂ nanospheres presented better controlled release and results in efficient death of cancer cells.

Cyclodextrin grafted calcium carbonate vaterite particles: efficient system for tailored release of hydrophobic anticancer or hormone drugs

The porous cyclodextrin-CaCO₃ microparticles are acting as the intelligent hydrophobic drug carriers, where the loaded drug is stable at blood pH but released at acidic pH (cancer cells) due to recrystallization of CaCO₃ particles.

Composite Magnetite and Protein Containing CaCO3 Crystals. External Manipulation and Vaterite → Calcite Recrystallization-Mediated Release Performance

Biocompatibility and high loading capacity of mesoporous CaCO3 vaterite crystals give an option to utilize the polycrystals for a wide range of (bio)applications. Formation and transformations of calcium carbonate polymorphs have been studied for decades, aimed at both basic and applied research interests. Here, composite multilayer-coated calcium carbonate polycrystals containing Fe3O4 magnetite nanoparticles and model protein lysozyme are fabricated. The structure of the composite polycrystals and vaterite → calcite recrystallization kinetics are studied. The recrystallization results in release of both loaded protein and Fe3O4 nanoparticles (magnetic manipulation is thus lost). Fe3O4 nanoparticles enhance the recrystallization that can be induced by reduction of the local pH with citric acid and reduction of the polycrystal crystallinity. Oppositely, the layer-by-layer assembled poly(allylamine hydrochloride)/poly(sodium styrenesulfonate) polyelectrolyte coating significantly inhibits the vaterite → calcite recrystallization (from hours to days) most likely due to suppression of the ion exchange giving an option to easily tune the release kinetics for a wide time scale, for example, for prolonged release. Moreover, the recrystallization of the coated crystals results in formulation of multilayer capsules keeping the feature of external manipulation. This study can help to design multifunctional microstructures with tailor-made characteristics for loading and controlled release as well as for external manipulation.

Novel Nanostructured Solid Materials for Modulating Oral Drug Delivery from Solid-State Lipid-Based Drug Delivery Systems

Lipid-based drug delivery systems (LBDDS) have gained significant attention in recent times, owing to their ability to overcome the challenges limiting the oral delivery of poorly water-soluble drugs. Despite the successful commercialization of several LBDDS products over the years, a large discrepancy exists between the number of poorly water-soluble drugs displaying suboptimal in vivo performances and the application of LBDDS to mitigate their various delivery challenges. Conventional LBDDS, including lipid solutions and suspensions, emulsions, and self-emulsifying formulations, suffer from various drawbacks limiting their widespread use and commercialization. Accordingly, solid-state LBDDS, fabricated by adsorbing LBDDS onto a chemically inert solid carrier material, have attracted substantial interest as a viable means of stabilizing LBDDS whilst eliminating some of the various limitations. This review describes the impact of solid carrier choice on LBDDS performance and highlights the importance of appropriate solid carrier material selection when designing hybrid solid-state LBDDS. Specifically, emphasis is placed on discussing the ability of the specific solid carrier to modulate drug release, control lipase action and lipid digestion, and enhance biopharmaceutical performance above the original liquid-state LBDDS. To encourage the interested reader to consider their solid carrier choice on a higher level, various novel materials with the potential for future use as solid carriers for LBDDS are described. This review is highly significant in guiding future research directions in the solid-state LBDDS field and fostering the translation of these delivery systems to the pharmaceutical marketplace.

Diatom-inspired skeletonisation of insulin - Mechanistic insights into crystallisation and extracellular bioactivity

In this paper, we encage insulin within calcium carbonate by means of a biomineralisation process. We find that both dogbone and crossbone morphologies develop during the crystallisation process. The crystals break down into small nanocrystals after prolonged immersion in phosphate buffer solution, which adhere extracellularly to mammalian cells without causing any observable damage or early cell-death. The mechanisms behind calcium carbonate encaging of single insulin monomers are detailed. This communication elucidates a novel, diatom-inspired approach to the mineral skeletonisation of insulin.

Facile preparation of porous magnetic polydopamine microspheres through an inverse replication strategy for efficient enzyme immobilization

Porous microspheres composed of biocompatible dopamine and magnetic Fe₃O₄ nanoparticles were fabricated by inverse replication of CaCO₃ templates.

Synthesis of organic–inorganic hybrid microcapsules through in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability

A facile and efficient route is developed to prepare (PDA–PEI)/titania hybrid microcapsules by in situ generation of an inorganic layer on an adhesive layer with mineralization-inducing capability under mild conditions.

Evidence of structural variability among synthetic and biogenic vaterite

Recently, the results of experimental and theoretical investigations have revealed that, in vaterite, two or even more crystalline structures coexist. In this communication we report evidence of diverse vaterite structures in biogenic samples of different origin. In addition, it is shown that the synthetic vaterite precipitated in the presence of poly-l-aspartate has structures similar to those of biogenic samples.