A Highly Active Titanium Dioxide Based Visible-Light Photocatalyst with Nonmetal Doping and Plasmonic Metal Decoration

Structurally and surficially activated TiO2 nanomaterials for photochemical reactions

Renewable fuels and environmental remediation are of paramount importance in today's world due to escalating concerns about climate change, pollution, and the finite nature of fossil fuels. Transitioning to sustainable energy sources and addressing environmental pollution has become an urgent necessity. Photocatalysis, particularly harnessing solar energy to drive chemical reactions for environmental remediation and clean fuel production, holds significant promise among emerging technologies. As a benchmark semiconductor in photocatalysis, TiO2 photocatalyst offers an excellent solution for environmental remediation and serves as a key tool in energy conversion and chemical synthesis. Despite its status as the default photocatalyst, TiO2 suffers from drawbacks such as a high recombination rate of charge carriers, low electrical conductivity, and limited absorption in the visible light spectrum. This review provides an in-depth exploration of the fundamental principles of photocatalytic reactions and presents recent advancements in the development of TiO2 photocatalysts. It specifically focuses on strategic approaches aimed at enhancing the performance of TiO2 photocatalysts, including improving visible light absorption for efficient solar energy harvesting, enhancing charge separation and transportation efficiency, and ensuring stability for robust photocatalysis. Additionally, the review delves into the application of photodegradation and photocatalysis, particularly in critical processes such as water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide generation, and alcohol oxidation. It also highlights the novel use of TiO2 in plastic polymerization and degradation, showcasing its potential for converting plastic waste into valuable chemicals and fuels, thereby offering sustainable waste management solutions. By addressing these essential areas, the review offers valuable insights into the potential of TiO2 photocatalysis for addressing pressing environmental and energy challenges. Furthermore, the review encompasses the application of TiO2 photochromic systems, expanding its scope to include other innovative research and applications. Finally, it addresses the underlying challenges and provides perspectives on the future development of TiO2 photocatalysts. Through addressing these issues and implementing innovative strategies, TiO2 photocatalysis can continue to evolve and play a pivotal role in sustainable energy and environmental applications.

UV-to-NIR Harvesting Conjugated Porous Polymer Nanocomposite: Upconversion and Plasmon Expedited Thioether Photooxidation

Photocatalysts capable of harvesting a broad range of the solar spectrum are essential for sustainable chemical transformations and environmental remediation. Herein, we have integrated NIR-absorbing upconversion nanoparticles (UCNP) with UV-Vis absorbing conjugated porous organic polymer (POP) through the in situ multicomponent C-C coupling to fabricate a UC-POP nanocomposite. The light-harvesting ability of UC-POP is further augmented by loading plasmonic gold nanoparticles (AuNP) into UC-POP. A three-times enhancement in the upconversion luminescence is observed upon the incorporation of AuNP in UC-POP, subsequently boosting the photocatalytic activity of UC-POP-Au. The spectroscopic and photoelectrochemical investigations infer the enhanced photocatalytic oxidation of thioethers, including mustard gas simulant by UC-POP-Au compared to POP and UC-POP due to the facile electron-hole pair generation, suppressed exciton recombination, and efficient charge carrier migration. Thus, the unique design strategy of combining plasmonic and upconversion nanoparticles with a conjugated porous organic polymer opens up new vistas towards artificial light harvesting.

Electron Tunneling Fosters Solar-to-Hydrogen Energy Conversion

Transition-metal chalcogenide quantum dots (TMCs QDs) exhibit emerging potential in the field of solar energy conversion due to large absorption coefficients for light harvesting, quantum size effect, and abundant active sites. However, fine-tuning the photoinduced charge carrier over TMCs QDs to manipulate the directional charge-transfer pathway remains challenging, considering their ultrashort charge lifetime and slow charge-transfer kinetics. To this end, herein, MoSx/PDDA/TMCs QDs heterostructures were exquisitely designed by a simple and green electrostatic self-assembly strategy under ambient conditions, wherein tailor-made negatively charged TMCs QDs stabilized by mercaptoacetic acid (MAA) were precisely self-assembled on the positively charged polydiallyl dimethylammonium chloride (PDDA)-modified MoSx nanoflowers (NFs), forming a well-defined three-dimensional heterostructured nanoarchitecture. As an electron trapping agent, an MoSx NFs cocatalyst benefits the unidirectional electron transfer from TMCs QDs to the ideal active centers on the MoSx NFs surface by tunneling the ultrathin insulating polymer interim layer, thereby boosting the charge separation efficiency and endowing self-assembled MoSx/PDDA/TMCs QDs heterostructures with considerably increased photocatalytic hydrogen evolution activity (1.96 mmol·g-1·h-1) and admirable stability under visible light irradiation. Our work will provide new insights into smart regulation of directional charge transfer over TMCs QDs-based photosystems for solar energy conversion.

Plasmonic Nanocrystal Assembly-Semiconductor Hybrids for Boosting Visible to Near-Infrared Photocatalysis

Plasmonic metal-semiconductor hybrid photocatalysts have received much attention because of their wide light harvesting range and efficient charge carrier generation capability originating from plasmon energy transfer. Here, we introduce a plasmonic metal-semiconductor hybrid nanostructure consisting of a Au core-satellite assembly and crystalline TiO2. The formation of Au@TiO2-Au core-satellite assemblies using TiO2 as a spacer and the subsequent growth of outer TiO2 shells on the core-satellite assemblies, followed by calcination, successfully generated Au core-satellite assembly@TiO2 nanostructures. Exquisite control over the growth of the TiO2 interlayer enabled the regulation of the gap distance between the core and satellite Au nanocrystals within the same hybrid morphology. Due to the structural controllability of the present approach, the gap-distance-dependent plasmonic and photocatalytic properties of the hybrid nanostructures could be explored. The nanostructures possessing the most closely arranged Au nanocrystals showed high photocatalytic activity under visible to near-infrared light irradiation, which can be attributed to strong plasmon coupling between the core and satellite Au nanocrystals that can expedite the formation of intense plasmon energy and its transfer to TiO2.

Eco-friendly fabrication of multifunctional magnetic plasmonic photocatalyst for adsorption, SERS monitoring and photodegradation of residual fluoroquinolone antibiotics in water

In this work, a kind of multifunctional magnetic plasmonic photocatalyst was prepared by a green and efficient process. Magnetic mesoporous anatase titanium dioxide (Fe₃O₄@mTiO₂) was synthesized by microwave-assisted hydrothermal, and Ag NPs were simultaneously in-situ grown on Fe₃O₄@mTiO₂ (Fe₃O₄@mTiO₂@Ag), graphene oxide (GO) was then wrapped on Fe₃O₄@mTiO₂@Ag (Fe₃O₄@mTiO₂@Ag@GO) to increase its adsorption capacity for fluoroquinolone antibiotics (FQs). Owing to the localized surface plasmon resonance (LSPR) effect of Ag, as well as the photocatalytic capacity of TiO₂, a multifunctional platform based on Fe₃O₄@mTiO₂@Ag@GO was constructed for adsorption, surface-enhanced Raman spectroscopy (SERS) monitoring and photodegradation of FQs in water. The quantitative SERS detection of norfloxacin (NOR), ciprofloxacin (CIP), and enrofloxacin (ENR) was demonstrated with LOD of 0.1 μg mL^-1, and the qualitative analysis was confirmed by density functional theory (DFT) calculation. The photocatalytic degradation rate of NOR over Fe₃O₄@mTiO₂@Ag@GO was about 4.6 and 1.4 times faster than that of Fe₃O₄@mTiO₂ and Fe₃O₄@mTiO₂@Ag, indicating the synergetic effects of Ag NPs and GO, the used Fe₃O₄@mTiO₂@Ag@GO can be easily recovered and recycled for at least 5 times. Thus, the eco-friendly magnetic plasmonic photocatalyst provided a potential solution for the removal and monitoring of residual FQs in environmental water.

Malachite Green Dye Decoloration over Au/TiO2-Nanotubes Photocatalyst under Simulate Visible-Light Irradiation

Au nanoparticles were supported on TiO₂ nanotubes by a novel vapor phase impregnation approach (VPI) using gold dimethyl-acetylacetonate as a precursor. This study aimed to evaluate the capacity of these materials in the photodecoloration of malachite green dye, with the vision to correlate the chemical, structural, morphological, and optical properties with its photocatalytic performance. The photocatalysts were characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectronic spectroscopy (XPS), electronic microscopy (HAADF-STEM and HRTEM), and UV-vis spectroscopy. The techniques mentioned above made it possible to detect the presence of small gold nanoparticles (around 3.1 nm), with a high apparent dispersion even at high metal loading for all analyzed systems. According to the XPS results, the Au nanoparticles remain reduced (Au°), and they have a high electronic interaction with TiO₂, which eventually originates an electronic exchange between them and consequently a decrease in the band gap energy. In addition, the surface plasmonic resonance observed through UV-vis spectroscopy of the Au nanoparticles are factors that can be related to the high decoloration observed in these photocatalysts, specifically in the 15 wt% Au material, which achieves maximum photodecoloration of malachite green dye at 93%.

A Photocatalytic Hydrolysis and Degradation of Toxic Dyes by Using Plasmonic Metal–Semiconductor Heterostructures: A Review

Converting solar energy to chemical energy through a photocatalytic reaction is an efficient technique for obtaining a clean and affordable source of energy. The main problem with solar photocatalysts is the recombination of charge carriers and the large band gap of the photocatalysts. The plasmonic noble metal coupled with a semiconductor can give a unique synergetic effect and has emerged as the leading material for the photocatalytic reaction. The LSPR generation by these kinds of materials has proved to be very efficient in the photocatalytic hydrolysis of the hydrogen-rich compound, photocatalytic water splitting, and photocatalytic degradation of organic dyes. A noble metal coupled with a low bandgap semiconductor result in an ideal photocatalyst. Here, both the noble metal and semiconductor can absorb visible light. They tend to produce an electron–hole pair and prevent the recombination of the generated electron–hole pair, which ultimately reacts with the chemicals in the surrounding area, resulting in an enhanced photocatalytic reaction. The enhanced photocatalytic activity credit could be given to the shared effect of the strong SPR and the effective separation of photogenerated electrons and holes supported by noble metal particles. The study of plasmonic metal nanoparticles onto semiconductors has recently accelerated. It has emerged as a favourable technique to master the constraint of traditional photocatalysts and stimulate photocatalytic activity. This review work focuses on three main objectives: providing a brief explanation of plasmonic dynamics, understanding the synthesis procedure and examining the main features of the plasmonic metal nanostructure that dominate its photocatalytic activity, comparing the reported literature of some plasmonic photocatalysts on the hydrolysis of ammonia borane and dye water treatment, providing a detailed description of the four primary operations of the plasmonic energy transfer, and the study of prospects and future of plasmonic nanostructures.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Localized surface plasmon resonance for enhanced electrocatalysis

Electrocatalysis plays a vital role in energy conversion and storage in modern society. Localized surface plasmon resonance (LSPR) is a highly attractive approach to enhance the electrocatalytic activity and selectivity with solar energy. LSPR excitation can induce the transfer of hot electrons and holes, electromagnetic field enhancement, lattice heating, resonant energy transfer and scattering, in turn boosting a variety of electrocatalytic reactions. Although the LSPR-mediated electrocatalysis has been investigated, the underlying mechanism has not been well explained. Moreover, the efficiency is strongly dependent on the structure and composition of plasmonic metals. In this review, the currently proposed mechanisms for plasmon-mediated electrocatalysis are introduced and the preparation methods to design supported plasmonic nanostructures and related electrodes are summarized. In addition, we focus on the characterization strategies used for verifying and differentiating LSPR mechanisms involved at the electrochemical interface. Following that are highlights of representative examples of direct plasmonic metal-driven and indirect plasmon-enhanced electrocatalytic reactions. Finally, this review concludes with a discussion on the remaining challenges and future opportunities for coupling LSPR with electrocatalysis.

A photo-Fenton nanocomposite ultrafiltration membrane for enhanced dye removal with self-cleaning properties

Membrane fouling is an ongoing challenge in the membrane filtration process. Herein, a photocatalytic membrane comprising a reactive layer was fabricated by engineering partially reduced graphene oxide/Ag nanoparticles/MIL-88A (prGO/Ag/M88A, pGAM) photocatalysts on the PVDF substrate membranes. Benefiting from the high conductivity of prGO and the surface plasmon resonance (SPR) effect of Ag nanoparticles (Ag NPs), the photo-sensitivity of the prGO/Ag/M88A is significantly enhanced. Compared to the membrane in the dark condition, the pGAM membrane displayed an enhanced dye removal efficiency (∼99.7%) and significantly improved permeability (∼189 L·m^-2·h^-1 bar^-1) towards dye contaminants based on the synergistic filtration/photo-Fenton processes. Significantly, the membrane retained high perm-selectivity after 10 cyclic runs (183 L·m^-2·h^-1 bar^-1 of permeability and 98.1% of dye removal), and its nano-channel structure did not collapse under high pressure (0.1-0.4 MPa). The membrane also exhibits antifouling properties with a high water flux recovery of more than 90%. In addition, the pGAM membrane exhibited a high MB degradation efficiency (∼90%) when it is directly used as a photocatalyst in the photo-Fenton system. The mechanism of the self-cleaning is also proposed through quenching experiments. The results of this study demonstrate that this self-cleaning membrane has huge promise for membrane anti-fouling and wastewater remediation.

Hierarchical WO3 microflowers with tailored oxygen vacancies for boosting photocatalytic dye degradation

Hierarchical WO3 microflowers with tailored surface oxygen vacancies show a remarkably boosted activity toward visible-light-driven photocatalytic dye degradation.

Recyclable SERS-Based Immunoassay Guided by Photocatalytic Performance of Fe3O4@TiO2@Au Nanocomposites

A novel recyclable surface-enhanced Raman scattering (SERS)-based immunoassay was demonstrated and exhibited extremely high sensitivity toward prostate specific antigen (PSA). The immunoassay, which possessed a sandwich structure, was constructed of multifunctional Fe₃O₄@TiO₂@Au nanocomposites as immune probe and Ag-coated sandpaper as immune substrate. First, by adjusting the density of outside Au seeds on Fe₃O₄@TiO₂ core-shell nanoparticles (NPs), the structure-dependent SERS and photocatalytic performance of the samples was explored by monitoring and degradating 4-mercaptobenzonic acid (4MBA). Afterwards, the SERS enhancement capability of Ag-coated sandpaper with different meshes was investigated, and a limit of detection (LOD), as low as 0.014 mM, was achieved by utilizing the substrate. Subsequently, the recyclable feasibility of PSA detection was approved by zeta potential measurement, absorption spectra, and SEM images and, particularly, more than 80% of SERS intensity still existed after even six cycles of immunoassay. The ultralow LOD of the recyclable immunoassay was finally calculated to be 1.871 pg/mL. Therefore, the recyclable SERS-based immunoassay exhibits good application prospects for diagnosis of cancer in clinical measurements.

TiO2 nanosheet/NiO nanorod hierarchical nanostructures: p-n heterojunctions towards efficient photocatalysis

TiO₂ nanosheet/NiO nanorod heterojunction hybrids have been developed through a hydrothermal route, where NiO nanorods (size: 5 nm in diameter and 20-40 nm in length) are deposited at the {0 0 1} facet of anatase TiO₂ nanosheets. The photocatalysts were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption-desorption analysis, UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS), photoluminescence spectroscopy and time-resolved fluorescence. The TiO₂/NiO photocatalysts exhibited good photocatalytic activities towards the degradation of methyl blue (MB) and phenol, and hydrogen generation efficiency under visible light irradiation. The maximum rate constant can be reached 0.0279 min^-1 and 0.0135 min^-1 respectively, which are about 12 and 10 times higher than that of TiO₂ nanosheets. And the hydrogen generation efficiency is 10 times higher than physical mixing of TiO₂ and NiO. Photocatalytic degradation efficiency remains more than 90% after 6 times cycle dye degradation, and the H₂ production efficiency is almost the same after four cycles, suggesting good stability and reusability. The enhanced photocatalytic activities are associated with the rational design of TiO₂/NiO hierarchical heterojunctions which ensues high photogenerated charge separation efficiency. With the improved photocatalytic performance, the TiO₂/NiO heterojunction hybrids are expected to be potential photocatalysts in environmental and energy related areas.

Anapole Excitations in Oxygen-Vacancy-Rich TiO2-x Nanoresonators: Tuning the Absorption for Photocatalysis in the Visible Spectrum

Research on optically resonant dielectric nanostructures has accelerated the development of photonic applications, driven by their ability to strongly confine light on the nanoscale. However, as dielectric resonators are typically operated below their band gap to minimize optical losses, the usage of dielectric nanoantenna concepts for absorption enhancement has largely remained unexplored. In this work, we realize engineered nanoantennas composed of photocatalytic dielectrics and demonstrate increased light-harvesting capabilities in otherwise weakly absorptive spectral regions. In particular, we employ anapole excitations, which are known for their strong light confinement, in nanodisks of oxygen-vacancy-rich TiO_2-x, a prominent photocatalyst that provides a powerful platform for exploring concepts in absorption enhancement in tunable nanostructures. The arising photocatalytic effect is monitored on the single particle level using the well-established photocatalytic silver reduction reaction on TiO₂. With the freedom of changing the optical properties of TiO₂ through tuning the abundance of V_O states, we discuss the interplay between cavity damping and the anapole-assisted field confinement for absorption enhancement. This concept is general and can be extended to other catalytic materials with higher refractive indices.

One-pot fabrication of 2D/2D HCa2Nb3O10/g-C3N4 type II heterojunctions towards enhanced photocatalytic H2 evolution under visible-light irradiation

Effective 2D-composite photocatalysts, HCa₂Nb₃O₁₀/g-C₃N₄, with enhanced photocatalytic activity are conveniently synthesized by a facile one-pot method.

Recent advancements in g-C3N4-based photocatalysts for photocatalytic CO2 reduction: a mini review

g-C₃N₄-based photocatalysts for photocatalytic CO₂ reduction.

A simple and effective synthesis of magnetic γ-Fe2O3@SiO2@TiO2-Ag microspheres as a recyclable photocatalyst: dye degradation and antibacterial potential

PURPOSE AND METHODS

In this study, an effective technique for synthesizing γ-Fe₂O₃@SiO₂@TiO₂-Ag magnetically separable photocatalyst was introduced by combining co-precipitation, sol-gel, and photo-deposition methods. A series of analyses including FTIR, SEM, EDS, XRD, and VSM were applied to characterize the prepared materials and the investigations on photocatalytic activity of the prepared composites were accomplished.

RESULTS

Compared to bare γ-Fe₂O₃@SiO₂@TiO₂, the Ag-doped composite was more active in terms of photocatalytic characteristics. By applying γ-Fe₂O₃@SiO₂@TiO₂-Ag, the decomposition rate of the Basic blue 41 reached to about 94% after 3 h of UV irradiation; this rate was 63% for pure γ-Fe₂O₃@SiO₂@TiO₂. The results indicated that the dye degradation kinetics followed first-order kinetic model. During the five cycles of separation, it was observed that the Ag-doped composite was greatly effective and stable in terms of recycling. Moreover, the results indicated that antibacterial activity of γ-Fe₂O₃@SiO₂@TiO₂-Ag was remarkably stronger than that of pure Fe₂O₃@SiO₂@TiO₂ particles.

CONCLUSION

It was concluded that by modifying magnetic TiO₂ by silver nanoparticles, charge separation was eased by catching photo-generated electrons, resulted in an enhanced photo- and biological activity. Graphical abstract.

Fluorine-assisted structural engineering of colloidal anatase TiO2 hierarchical nanocrystals for enhanced photocatalytic hydrogen production

Anatase TiO2 materials are well-known for their photocatalytic properties and their structure-performance relationship has been intensively studied over the past few decades. In this study, we report a versatile strategy to control the geometric and electronic structure of hierarchical anatase TiO2 nanocrystals via a colloidal synthesis technique in order to optimize their photocatalytic performances. The synthesis is modified from a classical nonaqueous sol-gel approach in which titanium alkoxides and long carbon chain carboxylic acids are used as titanium sources and hydrolysis/capping agents, respectively. By introducing fluoride ions into the reaction as competitive capping agents and controlling other parameters, the geometric structure of TiO2 nanocrystals can be regulated from nanorods and nanobipyramids to their hierarchical assembly structures with controlled dimension and crystallinity. Meanwhile, it is confirmed that the fluoride capping agents also affect the surface structure of TiO2 by fluorine doping, which exerts an additional impact on the electronic structure of TiO2 nanocrystals apart from morphology variation. Further investigation of photocatalytic hydrogen production performances of TiO2 nanocrystals with different structures indicates that the catalytic efficiency is highly dependent on structural factors including hierarchical shape, surface area and doping status. Obvious improvement of photocatalytic performance is observed in the optimized hierarchical TiO2 nanocrystals (2033.6 μmol g-1 h-1) compared to that in commonly prepared TiO2 nanobipyramids (1135.5 μmol g-1 h-1) and other hierarchical TiO2 nanocrystals (1331.9 μmol g-1 h-1 or lower), which demonstrates the effectiveness of material optimization by the strategy developed in this study.

Bacteria-Assisted Synthesis of Nanosheet-Assembled TiO2 Hierarchical Architectures for Constructing TiO2-Based Composites for Photocatalytic and Electrocatalytic Applications

Synthesis and application of three-dimensional TiO₂ hierarchical architectures are one of the major priorities in the research and development of TiO₂ catalysts. Using bacteria as a template and a reactor, a bioinspired strategy was developed in the present study to synthesize nanosheet-assembled TiO₂ hierarchical architectures (N-TiO₂-HA) and relative composites for photocatalytic and electrocatalytic applications. In the first part of this work, three kinds of bacteria were used for the synthesis of N-TiO₂-HA with satisfactory monodispersity, and the growth mechanism was investigated. In the second part, porous TiO₂ hollow spheres (P-TiO₂-HS), which were obtained by calcining N-TiO₂-HA at 750 °C in air, were incorporated with MIL-101(Fe) to improve the visible-light photocatalytic efficiency. The results of the photo-Fenton-assisted degradation of rhodamine B and ciprofloxacin indicate that the synthesized composites have excellent visible-light photocatalytic activity. In the third part, the nanosheet-assembled TiO₂-carbon hollow spheres (N-TiO₂-C-HS), which were obtained by calcining N-TiO₂-HA at 750 °C in argon atmosphere, were electrodeposited with Pt for electrocatalytic oxidation of methanol. The electrochemical measurements show that Pt-deposited N-TiO₂-C-HS have better electrocatalytic activity, stability, and tolerance to CO poisoning than commercial Pt/C catalysts.

Dual application of Shewanella oneidensis MR-1 in green biosynthesis of Pd nanoparticles supported on TiO2 nanotubes and assisted photocatalytic degradation of methylene blue

Biosynthesised nanocomposites have attracted growing interests attributed to their 'green' synthesis nature in recent years. Shewanella oneidensis MR-1, a dissimilatory metal-reducing bacterium, was used to reduce palladium (II) nitrate to palladium (0) nanoparticles (Pd NPs) under anaerobic conditions, resulting in the in situ formation of Pd NPs immobilised on TiO₂ nanotubes (TNTs) (Pd/TNTs nanocomposites). The Pd/TNTs nanocomposites were characterised by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray, and electron spin resonance, respectively. The results indicated that Pd NPs are successfully grown on the TNTs without aggregation. Photocatalytic degradation of methylene blue (MB) by Pd/TNTs nanocomposites under simulated sunlight was also investigated. Pd/TNTs nanocomposites had photocatalytic efficiency superior to that of single TiO₂ nanomaterials. The photocatalytic activity of Pd/TNTs nanocomposites can be enhanced by S. oneidensis MR-1. The results showed that after only 10 min, the degradation ratio of MB reached 98.7% by Pd/TNTs nanocomposites when simultaneously assisted with S. oneidensis MR-1.

Facile prepared ball-like TiO2 at GO composites for oxytetracycline removal under solar and visible lights

With the widespread use of oxytetracycline (OTC), residual OTCs have been detected in natural surface waters, as well as in water and wastewater treatment systems. Semiconductor photocatalysis has been proven to be a green and high-performing method for the removal of organic contaminants. However, most photocatalysts are only effective when irradiated by UV light. This study explores the efficiency of a new semiconductor photocatalysis method for OTC removal under solar and visible light. To expand the spectral range from the UV to the visible region, a facile prepared ball-like TiO₂ at graphene oxide (TiO₂@GO) composite, a TiO₂-associated catalyst, was synthesized. Chemical characterization indicated that the TiO₂@GO has the features of both TiO₂ and GO, with the regular TiO₂ fiber balls cladded by GO nanosheets. The photocatalytic activity of TiO₂@GO composites under solar and visible light was evaluated in terms of OTC degradation. Values of 100% and 90% OTC removal efficiencies were achieved with TiO₂@GO at 6 mg/L under solar and visible light irradiation, respectively. The band structure of TiO₂@GO expanded the spectral range to full light wavelengths, facilitating formation of a light-induced electron hole (h⁺), which was identified in this study as the major cause of OTC degradation. The pH and TSS levels (>100 mg/L) were found to have high and low impacts, respectively, on the removal efficiency of OTC, while natural organic matter (NOM) was found to have an insignificant impact. Furthermore, the degradation of OTC with catalysis by TiO₂@GO was verified using two real water samples, and averages of 90% and 75% OTC removal efficiencies were achieved under solar and visible light respectively. The results indicate that the synthesized TiO₂@GO composites can provide an effective way of removing toxic organic compounds, including OTC, from the water system.

Synthesis of Spherical TiO2 Particles with Disordered Rutile Surface for Photocatalytic Hydrogen Production

One of the most important issues in photocatalysis research has been the development of TiO2-based photocatalysts that work efficiently under visible light conditions. Here, we report the monodispersed, spherical TiO2 particles with disordered rutile surface for use as visible-light photocatalysts. The spherical TiO2 particles with disordered surface were synthesized by sol-gel synthesis, followed by sequential calcination, and chemical reduction process using Li/Ethylenediamine (Li/EDA) solution. Variation of the calcination temperature allowed the crystalline properties of the calcined TiO2 samples, such as the ratio of anatase and rutile, to be finely controlled. The content ratios of anatase phase to rutile phase leads to different degrees of disorder of the rutile surface, which is closely related to the photocatalysis activity. Chemical reduction using the Li/EDA solution enables selective reduction of the rutile surface of the calcined TiO2, resulting in enhanced light absorption. As a result, we were able to synthesize spherical TiO2 photocatalysts having a disordered rutile surface in a mixed crystalline phase, which is beneficial during photocatalysis in terms of light absorption and charge separation. When used as photocatalysts for hydrogen production under solar light conditions, the chemically-reduced TiO2 particles with both the disordered rutile surface and mixed crystalline phase showed significantly enhanced catalytic activity.

Self-Aligned Anisotropic Plasmonic Nanostructures

Great opportunities emerge not only in the generation of anisotropic plasmonic nanostructures but also in controlling their orientation relative to incident light. Herein, a stepwise seeded growth method is reported for the synthesis of rod-shaped plasmon nanostructures which are vertically self-aligned with respect to the surface of colloidal substrates. Anisotropic growth of metal nanostructure is achieved by depositing metal seeds onto the surface of colloidal substrates and then selectively passivating the seed surface to induce symmetry breaking in the subsequent seed-mediated growth process. The versatility of this method is demonstrated by producing nanoparticle dimers and linear trimers of Au, Au-Ag, Au-Pd, and Au-Cu₂ O. Further, this unique method enables the automatic vertical alignment of the resulting plasmonic nanostructures to the surface of the colloidal substrate, thereby making it possible to design magnetic/plasmonic nanocomposites that allow the dynamic tuning of the plasmon excitation by controlling their orientation using an external magnetic field. The controlled anisotropic growth of colloidal plasmonic nanostructures and their dynamic modulation of plasmon excitation further allow them to be conveniently fixed in a thin polymer film with a well-controlled orientation to display polarization-dependent patterns that may find important applications in information encryption.

Compact Integration of TiO₂ Nanoparticles into the Cross-Points of 3D Vertically Stacked Ag Nanowires for Plasmon-Enhanced Photocatalysis

The compact integration of semiconductor TiO₂ nanoparticles (NPs) into the 3D crossed region of stacked plasmonic Ag nanowires (NWs) enhanced the photocatalytic activities through synergistic effects between the strong localized surface plasmon resonance (LSPR) excitation at the 3D cross-points of the Ag NWs and the efficient hot electron transfer at the interface between the Ag NWs and the TiO₂ NPs. This paper explored new hybrid nanostructures based on the selective assembly of TiO₂ NPs onto 3D cross-points of vertically stacked Ag NWs. The assembled TiO₂ NPs directly contacted the 3D Ag NWs; therefore, charge separation occurred efficiently at the interface between the Ag NWs and the TiO₂ NPs. The composite nanomaterials exhibited high extinction across the ultraviolet-visible range, rendering the nanomaterials high-performance photocatalysts across the full (ultraviolet-visible) and the visible spectral regions. Theoretical simulations clearly revealed that the local plasmonic field was highly enhanced at the 3D crossed regions of the vertically stacked Ag NWs. A Raman spectroscopic analysis of probe dye molecules under photodegradation conditions clearly revealed that the nanogap in the 3D crossed region was crucial for facilitating plasmon-enhanced photocatalysis and plasmon-enhanced spectroscopy.

A Ternary Pt/Au/TiO2 -Decorated Plasmonic Wood Carbon for High-Efficiency Interfacial Solar Steam Generation and Photodegradation of Tetracycline

A ternary Pt/Au/TiO₂ nanoparticle (NP) decorated plasmonic wood carbon has been successfully fabricated by a simple two-step calcination method. The as-prepared Pt/Au/TiO₂ NP-decorated wood carbon showed an interfacial solar steam generation efficiency up to 90.4 %. Furthermore, the floating system exhibits an excellent photodegradation of tetracycline (TC; 40 mg L^-1 ). Up to 94 % degradation was achieved after 80 min of continuous light irradiation (λ>420 nm) with the assistance of solar steam process. The photocatalysis is promoted by the introduction of Pt/Au nanocomponents, which suppress the recombination of electron-hole pairs generated on TiO₂ and facilitate electron transfer. High-performance liquid chromatography mass spectrometry was employed to identify the reaction products of the photocatalytic system and a mechanistic insight was also provided. The as-prepared three-dimensional plasmonic wood carbon has a high photocatalytic performance. Such wood carbon-based system is recyclable and scalable for practical and versatile solar-driven clean water generation.

Carbon/TiO2/Fe2O3 hybrid shells as efficient visible light photocatalysts

Mesoporous C/TiO₂/Fe₂O₃ hollow hybrids with TiO₂/Fe₂O₃ p–n heterojunctions and electrically conductive carbon show high photocatalytic performance.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

From UV to Near-Infrared Light-Responsive Metal-Organic Framework Composites: Plasmon and Upconversion Enhanced Photocatalysis

The exploitation of photocatalysts that harvest solar spectrum as broad as possible remains a high-priority target yet grand challenge. In this work, for the first time, metal-organic framework (MOF) composites are rationally fabricated to achieve broadband spectral response from UV to near-infrared (NIR) region. In the core-shell structured upconversion nanoparticles (UCNPs)-Pt@MOF/Au composites, the MOF is responsive to UV and a bit visible light, the plasmonic Au nanoparticles (NPs) accept visible light, whereas the UCNPs absorb NIR light to emit UV and visible light that are harvested by the MOF and Au once again. Moreover, the MOF not only facilitates the generation of "bare and clean" Au NPs on its surface and realizes the spatial separation for the Au and Pt NPs, but also provides necessary access for catalytic substrates/products to Pt active sites. As a result, the optimized composite exhibits excellent photocatalytic hydrogen production activity (280 µmol g^-1 h^-1 ) under simulated solar light, and the involved mechanism of photocatalytic H₂ production under UV, visible, and NIR irradiation is elucidated. Reportedly, this is an extremely rare study on photocatalytic H₂ production by light harvesting in all UV, visible, and NIR regions.

Surfactant-regulated fabrication of gold nanostars in magnetic core/shell hybrid nanoparticles for controlled release of drug

Core-shell nanostructured materials, which are of great interest for fundamental research and industrial applications, have properties that can be enhanced by combining component superstructures. Here, we report the new construction of magnetic core-shell gold nanostars (AuNSs) for controlled release of drug. The AuNSs were successfully embedded intact between an inner silica layer and outside mesoporous silica layer to create magnetic core/shell hybrid nanoparticles by using a base cationic templating surfactant, cetyltrimethylammonium hydroxide (CTAOH). The core-shell nano-composites containing AuNSs exhibit the characteristics including high magnetization, mesoporous nanostructure, photothermal properties and low in vitro toxicity, showing the potential applications for drug delivery and controlled release.

Facile synthesis of novel polypyrrole dispersed AgFeO2nanohybrid with highly efficient photocatalytic activity towards 2,4,6-trichlorophenol degradation

Synthesis of polypyrrole dispersed AgFeO₂nanohybrids for highly efficient visible light driven eco-friendly photocatalysis.

Structure and excellent visible light catalysis of Prussian blue analogues BiFe(CN)6·4H2O

BiFe(CN)₆·4H₂O, which exhibited a layered structure of FeC₆ and BiN₆ coordination polyhedra, was synthesised and exhibited excellent visible light catalytic activity.

Influence of dimensionality and crystallization on visible-light hydrogen production of Au@TiO2 core–shell photocatalysts based on localized surface plasmon resonance

We synthesized four Au@TiO₂ nanostructures, which exhibit dimensionality- and crystallinity-dependent photocatalytic activity towards H₂ generation.

Multichannel Charge Transfer and Mechanistic Insight in Metal Decorated 2D-2D Bi2 WO6 -TiO2 Cascade with Enhanced Photocatalytic Performance

Promising semiconductor-based photocatalysis toward achieving efficient solar-to-chemical energy conversion is an ideal strategy in response to the growing worldwide energy crisis, which however is often practically limited by the insufficient photoinduced charge-carrier separation. Here, a rational cascade engineering of Au nanoparticles (NPs) decorated 2D/2D Bi₂ WO₆ -TiO₂ (B-T) binanosheets to foster the photocatalytic efficiency through the manipulated flow of multichannel-enhanced charge-carrier separation and transfer is reported. Mechanistic characterizations and control experiments, in combination with comparative studies over plasmonic Au/Ag NPs and nonplasmonic Pt NPs decorated 2D/2D B-T composites, together demonstrate the cooperative synergy effect of multiple charge-carrier transfer channels in such binanosheets-based ternary composites, including Z-scheme charge transfer, "electron sink," and surface plasmon resonance effect, which integratively leads to the boosted photocatalytic performance.