Double single-crystal-to-single-crystal transformation and small-molecule activation in rhodium NHC complexes

Temperature induced single-crystal to single-crystal transformation of uranium azide complexes

The monomeric and dimeric uranium azide complexes {[(CH3)2NCH2CH2NPiPr2]2U(N3)2} (2) and {[(CH3)2NCH2CH2NPiPr2]2U(N3)2}2 (3) were synthesized by treating complex 1 with NaN3 at 60 and -20 °C, respectively. A temperature-induced single-crystal to single-crystal transformation of 3 to 2 was observed. The reduction of either 2 or 3 with KC8 yields a uranium nitride complex {[(CH3)2NCH2CH2NPiPr2]4U2(μ-N)2} (4).

Synthesis of a rhodium(III) dinitrogen complex using a calix[4]arene-based diphosphine ligand

The synthesis and characterisation of the rhodium(III) dinitrogen complex [Rh(2,2'-biphenyl)(CxP₂)(N₂)]⁺ are described, where CxP₂ is a trans-spanning calix[4]arene-based diphosphine and the dinitrogen ligand is projected into the cavity of the macrocycle.

Preparation of Mixed Bis-N-Heterocyclic Carbene Rhodium(I) Complexes

A series of mixed bis-NHC rhodium(I) complexes of type RhCl(η2-olefin)(NHC)(NHC’) have been synthesized by a stepwise reaction of [Rh(μ-Cl)(η2-olefin)2]2 with two different NHCs (NHC = N-heterocyclic carbene), in which the steric hindrance of both NHC ligands and the η2-olefin is critical. Similarly, new mixed coumarin-functionalized bis-NHC rhodium complexes have been prepared by a reaction of mono NHC complexes of type RhCl(NHC-coumarin)(η2,η2-cod) with the corresponding azolium salt in the presence of an external base. Both synthetic procedures proceed selectively and allow the preparation of mixed bis-NHC rhodium complexes in good yields.

MicroED characterization of a robust cationic σ-alkane complex stabilized by the [B(3,5-(SF5)2C6H3)4]- anion, via on-grid solid/gas single-crystal to single-crystal reactivity

Microcrystalline (∼1 μm) [Rh(Cy₂PCH₂CH₂PCy₂)(norbornadiene)][S-BAr^F₄], [S-BAr^F₄] = [B(3,5-(SF₅)₂C₆H₃)₄]⁻, reacts with H₂ in a single-crystal to single-crystal transformation to form the σ-alkane complex [Rh(Cy₂PCH₂CH₂PCy₂)(norbornane)][S-BAr^F₄], for which the structure was determined by microcrystal Electron Diffraction (microED), to 0.95 Å resolution, via an on-grid hydrogenation, and a complementary single-crystal X-ray diffraction study on larger, but challenging to isolate, crystals. Comparison with the [BAr^F₄]⁻ analogue [Ar^F = 3,5-(CF₃)₂(C₆H₃)] shows that the [S-BAr^F₄]⁻ anion makes the σ-alkane complex robust towards decomposition both thermally and when suspended in pentane. Subsequent reactivity with dissolved ethene in a pentane slurry, forms [Rh(Cy₂PCH₂CH₂PCy₂)(ethene)₂][S-BAr^F₄], and the catalytic dimerisation/isomerisation of ethene to 2-butenes. The increased stability of [S-BAr^F₄]⁻ salts is identified as being due to increased non-covalent interactions in the lattice, resulting in a solid-state molecular organometallic material with desirable stability characteristics.

The thermally and chemically robust σ-alkane complex [Rh(Cy₂PCH₂CH₂PCy₂)(norborane)][B(3,5-(SF₅)₂C₆H₃)₄] is characterized by micro-electron diffraction using on-grid single-crystal to single-crystal reactivity.

Orientational isomerisation of guest molecules in equilibrium in a tubular host crystal formed via halogen and hydrogen bonding

Fine-tuning of the ratio of two different states is important in controlling the structures and functions of crystalline materials. Here we report that clathrated guest molecules inside a tubular host...

Reactions of POP-pincer rhodium(I)-aryl complexes with small molecules: coordination flexibility of the ether diphosphine

Reactions of the aryl complexes Rh(aryl){κ3-P,O,P-[xant(PiPr2)2]} (1; aryl = 3,5-Me2C6H3 (a), C6H5 (b), 3,5-Cl2C6H3 (c), 3-FC6H4 (d); xant(PiPr2)2 = 9,9-dimethyl-4,5-bis-(diisopropylphosphino)xanthene) with O2, CO, and MeO2CC≡CCO2Me have been performed. Under 1 atm of O2, the pentane solutions of complexes 1 afford the dinuclear peroxide derivatives [Rh(aryl){κ2-P,P-xant(PiPr2)2}]2(μ-O2)2 (2a–2d) as yellow solids. In solution, these species are unstable. In dichloromethane, at room temperature, they are transformed into the dioxygen adducts Rh(aryl)(η2-O2){κ3-P,O,P-[xant(PiPr2)2]} (3a–3d), as a result of the rupture of the double peroxide bridge and the reduction of the metal center. Complex 3b decomposes in benzene, at 50 °C, to give diphosphine oxide, phenol, and biphenyl. Complexes 1 react with CO to give the square-planar mono carbonyl derivatives Rh(aryl)(CO){κ2-P,P-[xant(PiPr2)2]} (4a–4d), which under carbon monoxide atmosphere evolve to benzoyl species Rh{C(O)aryl}(CO){κ2-P,P-[xant(PiPr2)2]} (5a–5d), resulting from the migratory insertion of CO into the Rh-aryl bond and the coordination of a second CO molecule. The transformation is reversible; under vacuum, complexes 5 regenerate the precursors 4. The addition of the activated alkyne to complexes 1b and 1d initially leads to the π-alkyne intermediates Rh(aryl){η2-C(CO2Me)≡C(CO2Me)}{κ3-P,O,P-[xant(PiPr2)2]} (6b, 6d), which evolve to the alkenyl derivatives Rh{(E)-C(CO2Me)=C(CO2Me)aryl}{κ3-P,O,P-[xant(PiPr2)2]} (7b, 7d). The diphosphine adapts its coordination mode to the stability requirements of the different complexes, coordinating cis-κ2-P,P in complexes 2, fac-κ3-P,O,P in compounds 3, trans-κ2-P,P in the mono carbonyl derivatives 4 and 5, and mer-κ3-P,O,P in products 6 and 7.

Inner-Sphere Oxygen Activation Promoting Outer-Sphere Nucleophilic Attack on Olefins

Alkoxylation and hydroxylation reactions of 1,5-cyclooctadiene (cod) in an iridium complex with alcohols and water promoted by the reduction of oxygen to hydrogen peroxide are described. The exo configuration of the OH/OR groups in the products agrees with nucleophilic attack at the external face of the olefin as the key step. The reactions also require the presence of a coordinating protic acid (such as picolinic acid (Hpic)) and involve the participation of a cationic diolefin iridium(III) complex, [Ir(cod)(pic)₂ ]⁺ , which has been isolated. Independently, this cation is also involved in easy alkoxy group exchange reactions, which are very unusual for organic ethers. DFT studies on the mechanism of olefin alkoxylation mediated by oxygen show a low-energy proton-coupled electron-transfer step connecting a superoxide-iridium(II) complex with hydroperoxide-iridium(III) intermediates, rather than peroxide complexes. Accordingly, a more complex reaction, with up to four different products, occurred upon reacting the diolefin-peroxide iridium(III) complex with Hpic. Moreover, such hydroperoxide intermediates are the origin of the regio- and stereoselectivity of the hydroxylation/alkoxylation reactions. If this protocol is applied to the diolefin-rhodium(I) complex [Rh(pic)(cod)], free alkyl ethers ORC₈ H₁₁ (R=Me, Et) resulted, and the reaction is enantioselective if a chiral amino acid, such as l-proline, is used instead of Hpic.

Solvent-induced SC–SC transformation within the ZnII–triazole system: a promising MnO4− selective luminescent probe

The solvent-induced SC–SC transformation within the Zn^II–triazole system has generated a 3D network containing corrugated ladders of 4a. The luminescence properties indicated that 4a could be considered as a MnO₄⁻ selective luminescent probe.

Unbridged Rh(ii)–Rh(ii) complexes of N-heterocyclic carbenes and reactions with O2 to form dirhodium(μ–η1:η1-O2) complexes

Dimeric rhodium(ii) [Rh(L)(CH₃CN)]₂(PF₆)₄ and rhodium(iii) peroxide [Rh(L)(PPh₃)]₂(μ–η¹:η¹-O₂)(PF₆)₄ and [Rh(L)(PCy₃)]₂(μ–η¹:η¹-O₂)(PF₆)₄ (L = bis(N-pyridylimidazolylidenyl)methane) were reported.

Achievement of ligand-field induced thermochromic luminescence via two-step single-crystal to single-crystal transformations

We report here a new approach to achieve thermochromic luminescence through thermally induced ligand-field transformations. A one-dimensional chain manganese(ii) complex exhibits thermochromic luminescence from blue-green (502 nm) to red (617 nm) emission in a wide range of temperatures (480-80 K), ascribed to the conversion of a tetrahedronal to trigonal bipyramidal ligand-field via two-step single-crystal to single-crystal transformations.

Enantiopure versus Racemic Mixture in Reversible, Two-Step, Single-Crystal-to-Single-Crystal Transformations of Copper(II) Complexes

The reaction of chiral sodium complexes, ¹_∞ [Na(S-valmetH)]⋅H₂ O (1-S) and ¹_∞ [Na(R-valmetH)]⋅H₂ O (1-R), with copper(II) acetate affords chiral one-dimensional coordination polymers with the formulas ¹_∞ [Cu(S-valmet)(H₂ O)]⋅H₂ O (2-S) and ¹_∞ [Cu(R-valmet)(H₂ O)]⋅H₂ O (2-R) (R/S-valmetH₂ are Schiff base proligands resulting from the condensation reactions between o-vanillin and R/S-methionine). The copper ions are connected by the carboxylato groups belonging to the amino-acid moieties, resulting in infinite chains showing syn-anti out-of-plane bridging mode. The circular dichroism spectra of 1-S, 1-R, 2-S, and 2-R confirm their enantiomeric nature. Compounds 2-S and 2-R undergo a two-step single-crystal-to-single-crystal transformation, with the elimination of the lattice and coordinated water molecules: ¹_∞ [Cu(S-valmet)(H₂ O)]⋅H₂ O (2-S)→¹_∞ [Cu(S-valmet)]⋅H₂ O (3-S⋅H₂ O)→¹_∞ [Cu(S-valmet)] (3-S) and ¹_∞ [Cu(R-valmet)(H₂ O)]⋅H₂ O (2-R)→¹_∞ [Cu(R-valmet)]⋅H₂ O (3-R⋅H₂ O)→¹_∞ [Cu(R-valmet)] (3-R), respectively. During these transformations, every pair of face-to-face chains present in 2-S (or 2-R) has been "zipped up" into a chiral double chain through the removal of the aqua ligands and their replacement by the carboxylato oxygen atoms from the neighboring chain. Consequently, each carboxylato group now bridges three copper ions. The conversion of the single chains, 2-S and 2-R, into the double chains, 3-S and 3-R, is accompanied by a change of the strength of the exchange interactions between the copper ions: weak antiferromagnetic couplings are observed in compound 2-S (J/k_B =-1.23(5) K, H=-2J ΣS_i S_i+1 ) and relatively strong in compound 3-S (J/k_B =-76.0(8) K). When the racemic mixture of the ligands, R,S-valmetH₂ , is employed, in the same experimental conditions, a racemic mixture of mononuclear compounds, [Cu(R,S-valmet)(H₂ O)₂ ]⋅H₂ O (4-RS), is obtained. Compound 4-RS also undergoes a SCSC transformation with the elimination of the lattice and one of the coordinated water molecules, resulting in a racemic mixture of chiral chains, ¹_∞ [Cu(R-valmet)(H₂ O)]⋅¹_∞ [Cu(S-valmet)(H₂ O)] (5-RS). In this compound, the coupling of the copper(II) ions within the chains is weak and ferromagnetic (J/k_B =+0.10(2) K). These results prove that the chirality of the valmetH₂ ligands (optically pure or racemic mixture) plays a key role in the self-assembly process of the copper(II) complexes.

Single crystal-to-single crystal transformations induced by ammonia–water equilibrium changes

Reversible single crystal-to-single crystal transformations were observed for the Ni(ii) complex with 5-methyl-5-phenylhydantoin.

Chemical reaction within a compact non-porous crystal containing molecular clusters without the loss of crystallinity

A yellow crystal with {FeII4O₄} cubes is modified to a black crystal with {FeIII4O₄} cubes via a SC–SC transformation.

The very rare occurrence of a gas–solid chemical reaction has been found to take place on a molecule within a compact non-porous crystal without destroying its long-range structural order and retaining similar crystal structures when yellow crystals of FeII4(mbm)₄Cl₄(MeOH)₄ were exposed to air to give black [FeIII4(mbm)₄Cl₄(OH)₄]·2H₂O. The latter cannot be synthesised directly. The original cluster underwent an exchange of methanol to hydroxide, an oxidation of Fe(ii) to Fe(iii), a change in stereochemistry and hydration while the packing and space-group remained unaltered.

Structural characterization of framework-gas interactions in the metal-organic framework Co2(dobdc) by in situ single-crystal X-ray diffraction

The crystallographic characterization of framework-guest interactions in metal-organic frameworks allows the location of guest binding sites and provides meaningful information on the nature of these interactions, enabling the correlation of structure with adsorption behavior. Here, techniques developed for in situ single-crystal X-ray diffraction experiments on porous crystals have enabled the direct observation of CO, CH4, N2, O2, Ar, and P4 adsorption in Co2(dobdc) (dobdc4- = 2,5-dioxido-1,4-benzenedicarboxylate), a metal-organic framework bearing coordinatively unsaturated cobalt(ii) sites. All these molecules exhibit such weak interactions with the high-spin cobalt(ii) sites in the framework that no analogous molecular structures exist, demonstrating the utility of metal-organic frameworks as crystalline matrices for the isolation and structural determination of unstable species. Notably, the Co-CH4 and Co-Ar interactions observed in Co2(dobdc) represent, to the best of our knowledge, the first single-crystal structure determination of a metal-CH4 interaction and the first crystallographically characterized metal-Ar interaction. Analysis of low-pressure gas adsorption isotherms confirms that these gases exhibit mainly physisorptive interactions with the cobalt(ii) sites in Co2(dobdc), with differential enthalpies of adsorption as weak as -17(1) kJ mol-1 (for Ar). Moreover, the structures of Co2(dobdc)·3.8N2, Co2(dobdc)·5.9O2, and Co2(dobdc)·2.0Ar reveal the location of secondary (N2, O2, and Ar) and tertiary (O2) binding sites in Co2(dobdc), while high-pressure CO2, CO, CH4, N2, and Ar adsorption isotherms show that these binding sites become more relevant at elevated pressures.

Selective C-H Activation at a Molecular Rhodium Sigma-Alkane Complex by Solid/Gas Single-Crystal to Single-Crystal H/D Exchange

The controlled catalytic functionalization of alkanes via the activation of C-H bonds is a significant challenge. Although C-H activation by transition metal catalysts is often suggested to operate via intermediate σ-alkane complexes, such transient species are difficult to observe due to their instability in solution. This instability may be controlled by use of solid/gas synthetic techniques that enable the isolation of single-crystals of well-defined σ-alkane complexes. Here we show that, using this unique platform, selective alkane C-H activation occurs, as probed by H/D exchange using D₂, and that five different isotopomers/isotopologues of the σ-alkane complex result, as characterized by single-crystal neutron diffraction studies for three examples. Low-energy fluxional processes associated with the σ-alkane ligand are identified using variable-temperature X-ray diffraction, solid-state NMR spectroscopy, and periodic DFT calculations. These observations connect σ-alkane complexes with their C-H activated products, and demonstrate that alkane-ligand mobility, and selective C-H activation, are possible when these processes occur in the constrained environment of the solid-state.

N-Heterocyclic carbenes as supporting ligands in transition metal complexes of N2

Recent developments have substantially expanded the scope of N-heterocyclic carbenes (NHCs) as ancillary ligands in coordination chemistry and homogeneous catalysis. This review provides a short overview of the emerging field of NHC-supported transition metal complexes of N2 and the possibilities to catalytically activate N2 in these complexes.

Coordination polymer flexibility leads to polymorphism and enables a crystalline solid-vapour reaction: a multi-technique mechanistic study

Despite an absence of conventional porosity, the 1D coordination polymer [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 ] (1; TMP=tetramethylpyrazine) can absorb small alcohols from the vapour phase, which insert into AgO bonds to yield coordination polymers [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)3 (ROH)2 ] (1-ROH; R=Me, Et, iPr). The reactions are reversible single-crystal-to-single-crystal transformations. Vapour-solid equilibria have been examined by gas-phase IR spectroscopy (K=5.68(9)×10(-5) (MeOH), 9.5(3)×10(-6) (EtOH), 6.14(5)×10(-5) (iPrOH) at 295 K, 1 bar). Thermal analyses (TGA, DSC) have enabled quantitative comparison of two-step reactions 1-ROH→1→2, in which 2 is the 2D coordination polymer [Ag4 (O2 C(CF2 )2 CF3 )4 (TMP)2 ] formed by loss of TMP ligands exclusively from singly-bridging sites. Four polymorphic forms of 1 (1-A(LT) , 1-A(HT) , 1-B(LT) and 1-B(HT) ; HT=high temperature, LT=low temperature) have been identified crystallographically. In situ powder X-ray diffraction (PXRD) studies of the 1-ROH→1→2 transformations indicate the role of the HT polymorphs in these reactions. The structural relationship between polymorphs, involving changes in conformation of perfluoroalkyl chains and a change in orientation of entire polymers (A versus B forms), suggests a mechanism for the observed reactions and a pathway for guest transport within the fluorous layers. Consistent with this pathway, optical microscopy and AFM studies on single crystals of 1-MeOH/1-A(HT) show that cracks parallel to the layers of interdigitated perfluoroalkyl chains develop during the MeOH release/uptake process.

Highly selective directed arylation reactions via back-to-back dehydrogenative C-H borylation/arylation reactions

Dimeric rhodium N-heterocyclic carbene complexes are demonstrated to be effective catalyst precursors for directed C-H borylation reactions at room temperature. The reactions are highly selective for mono-borylation and can be combined with a one-pot Suzuki-Miyaura coupling to give C-H arylation products with exclusive selectivity for mono-arylation without the requirement for steric blocking groups.

Organometallic synthesis, reactivity and catalysis in the solid state using well-defined single-site species

Acting as a bridge between the heterogeneous and homogeneous realms, the use of discrete, well-defined, solid-state organometallic complexes for synthesis and catalysis is a remarkably undeveloped field. Here, we present a review of this topic, focusing on describing the key transformations that can be observed at a transition-metal centre, as well as the use of well-defined organometallic complexes in the solid state as catalysts. There is a particular focus upon gas-solid reactivity/catalysis and single-crystal-to-single-crystal transformations.

Solid-state synthesis and characterization of σ-alkane complexes, [Rh(L2)(η(2),η(2)-C7H12)][BAr(F)4] (L2 = bidentate chelating phosphine)

The use of solid/gas and single-crystal to single-crystal synthetic routes is reported for the synthesis and characterization of a number of σ-alkane complexes: [Rh(R2P(CH2)nPR2)(η(2),η(2)-C7H12)][BAr(F)4]; R = Cy, n = 2; R = (i)Pr, n = 2,3; Ar = 3,5-C6H3(CF3)2. These norbornane adducts are formed by simple hydrogenation of the corresponding norbornadiene precursor in the solid state. For R = Cy (n = 2), the resulting complex is remarkably stable (months at 298 K), allowing for full characterization using single-crystal X-ray diffraction. The solid-state structure shows no disorder, and the structural metrics can be accurately determined, while the (1)H chemical shifts of the Rh···H-C motif can be determined using solid-state NMR spectroscopy. DFT calculations show that the bonding between the metal fragment and the alkane can be best characterized as a three-center, two-electron interaction, of which σCH → Rh donation is the major component. The other alkane complexes exhibit solid-state (31)P NMR data consistent with their formation, but they are now much less persistent at 298 K and ultimately give the corresponding zwitterions in which [BAr(F)4](-) coordinates and NBA is lost. The solid-state structures, as determined by X-ray crystallography, for all these [BAr(F)4](-) adducts are reported. DFT calculations suggest that the molecular zwitterions within these structures are all significantly more stable than their corresponding σ-alkane cations, suggesting that the solid-state motif has a strong influence on their observed relative stabilities.

Pyridine versus acetonitrile coordination in rhodium–N-heterocyclic carbene square-planar complexes

Experimental and theoretical studies on the factors that control the coordination chemistry of N-donor ligands in square-planar complexes of the type RhCl(NHC)L¹L² (NHC = N-heterocyclic carbene) are presented.

A series of two-dimensional microporous triazole-functionalized metal–organic frameworks with the new multi-dentate ligand 1-(4-aminobenzyl)-1,2,4-triazole: single-crystal-to-single-crystal transformation, structural diversity and luminescent sensing

A new flexible multi-dentate 1-(4-aminobenzyl)-1,2,4-triazole (abtz) ligand has been synthesized, and a series of two-dimensional triazole-functionalized metal–organic frameworks has been isolated.

Springloaded porphyrin NHC hybrid rhodium(III) complexes: carbene dissociation and oxidation catalysis

Porphyrin rhodium(III) complexes accommodate one or two NHC ligands in the apical position, which leads to severe porphyrin distortion and dearomatization. The strain in the bis(carbene) complex induces facile carbene dissociation and the formation of a catalytically active site for alcohol oxidation.

An organometallic complex revealing an unexpected, reversible, temperature induced SC–SC transformation

A reversible, temperature driven phase transformation that takes place at ca. 180 K, in a single-crystal to single-crystal manner, has been observed for a monometallic transition metal coordination complex based on a fac-Re(CO)₃ core, with a chelated 2,2′-bipyridine unit and a halogenated N-(4-iodophenyl)nicotinamide axial co-ligand.

Oxygen chemisorption/desorption in a reversible single-crystal-to-single-crystal transformation

A compound that can reversibly chemisorb O₂ in the solid phase undergoes several consecutive single-crystal-to-single-crystal transformations involving the cleavage of four bonds and the creation of four new bonds, in one single molecule.