Reaction of size-selected iron-oxide cluster cations with methane: a model study of rapid methane loss in Mars' atmosphere

We report gas-phase reactions of free iron-oxide clusters, FenOm+, and their Ar adducts with methane in the context of chemical processes in Mars' atmosphere. Methane activation was observed to produce FenOmCH2+/FenOmCD2+ and FenOmC+, where the reactivity exhibited size and composition dependence. For example, the rate coefficients of methane activation for Fe3O+ and Fe4O+ were estimated to be 1 × 10-13 and 3 × 10-13 cm3 s-1, respectively. Based on these reaction rate coefficients, the presence of iron-oxide clusters/particles with a density as low as 107 cm-3 in Mars' atmosphere would explain the rapid loss of methane observed recently by the Curiosity rover.

Probing adsorption of methane onto vanadium cluster cations via vibrational spectroscopy

Photofragment spectroscopy is used to measure the vibrational spectra of V2+(CH4)n (n = 1-4), V3+(CH4)n (n = 1-3), and Vx+(CH4) (x = 4-8) in the C-H stretching region (2550-3100 cm-1). Spectra are measured by monitoring loss of CH4. The experimental spectra are compared to simulations at the B3LYP+D3/6-311++G(3df,3pd) level of theory to identify the geometry of the ions. Multi-reference configuration interaction with Davidson correction (MRCI+Q) calculations are also carried out on V2+ and V3+. The methane binding orientation in V2+(CH4)n (n = 1-4) evolves from η3 to η2 as more methane molecules are added. The IR spectra of metal-methane clusters can give information on the structure of metal clusters that may otherwise be hard to obtain from isolated clusters. For example, the V3+(CH4)n (n = 1-3) experimental spectra show an additional peak as the second and third methane molecules are added to V3+, which indicates that the metal atoms are not equivalent. The Vx+(CH4) show a larger red shift in the symmetric C-H stretch for larger clusters with x = 5-8 than for the small clusters with x = 2, 3, indicating increased covalency in the interaction of larger vanadium clusters with methane.

Probing the binding and activation of small molecules by gas-phase transition metal clusters via IR spectroscopy

Isolated transition metal clusters have been established as useful models for extended metal surfaces or deposited metal particles, to improve the understanding of their surface chemistry and of catalytic reactions. For this objective, an important milestone has been the development of experimental methods for the size-specific structural characterization of clusters and cluster complexes in the gas phase. This review focusses on the characterization of molecular ligands, their binding and activation by small transition metal clusters, using cluster-size specific infrared action spectroscopy. A comprehensive overview and a critical discussion of the experimental data available to date is provided, reaching from the initial results obtained using line-tuneable CO₂ lasers to present-day studies applying infrared free electron lasers as well as other intense and broadly tuneable IR laser sources.

Size Effects in Gas-phase C-H Activation

The gas-phase clusters reaction permits addressing fundamental aspects of the challenges related to C-H activation. The size effect plays a key role in the activation processes as it may substantially affect both the reactivity and selectivity. In this paper, we reviewed the size effect related to the hydrocarbon oxidation by early transition metal oxides and main group metal oxides, methane activation mediated by late transition metals. Based on mass-spectrometry experiments in conjunction with quantum chemical calculations, mechanistic discussions were reviewed to present how and why the size greatly regulates the reactivity and product distribution.

IR Spectroscopic Characterization of Methane Adsorption on Copper Clusters Cun+ (n = 2-4)

The interaction of CH₄ with cationic copper clusters has been studied with infrared-multiple photon dissociation (IRMPD) spectroscopy. Cu_n⁺ (n = 2-4) formed by laser ablation were reacted with CH₄. The formed complexes were irradiated with the IR light of the free-electron laser for intracavity experiments (FELICE), and the fragments were mass-analyzed with a reflectron time-of-flight mass spectrometer. The structures of the Cu_n⁺-CH₄ complexes are assigned on the basis of comparison between the resulting IRMPD spectra to spectra of different isomers calculated with density functional theory (DFT). For all sizes n, the structure found is one with molecularly adsorbed CH₄. Only slight deformations of the CH₄ molecule have been identified upon adsorption on the clusters, which results in redshifts of the spectroscopic bands. This deformation can be explained by charge transfer from the cluster to the adsorbed methane molecule.

Ion spectroscopy in methane activation

This review is devoted to ion spectroscopy studies of complexes relevant for the understanding of methane activation with metal ions and clusters. Methane activation starts with the formation of a complex with a metal ion. The degree of the interaction between an intact methane molecule and the ion can be monitored by the perturbations of C-H stretch vibrations in the methane molecule. Binding mediated by the electrostatic interaction results in a η3 type coordination of methane. In contrast, binding governed by orbital interactions results in a η2 type coordination of methane. We further review the spectroscopic characterization of activation products of metal-methane reactions, such as the metal-carbene and carbyne products resulting from the interaction of selected 5d metals with methane. The focus of recent research in the field has shifted towards the investigation of interactions between methane and metal clusters. We show examples highlighting that metal clusters can be more reactive in methane activation reactions.

Gas-Phase Synthesis of Metal Olefins: Plasma-Assisted Methane Dehydrogenation and C═C Bond Formation

Methane dehydrogenation and C-C coupling under mild conditions are very important but challenging in chemistry. Utilizing a customized time of flight mass spectrometer combined with a magnetron sputtering (MagS) cluster source, here, we have conducted a study on the reactions of methane with small silver and copper clusters simply by introducing methane in argon as the working gas for sputtering. Interestingly, a series of [M(C_nH_2n)]⁺ (M = Cu and Ag; n = 2-12) clusters were observed, indicating high-efficiency methane dehydrogenation in such a plasma-assisted chamber system. Density functional theory calculations find the lowest energy structures of the [M(C_nH_2n)]⁺ series pertaining to olefins indicative of both C-H bond activation of methane and C-C bond coupling. We analyzed the interactions involved in the [Cu(C_nH_2n)]⁺ and [Ag(C_nH_2n)]⁺ (n = 1-6) clusters and demonstrated the reaction coordinates for the "Cu⁺ + CH₄" and "Ag⁺ + CH₄." It is illustrated that the presence of a second methane molecule enables us to reduce the necessary energy of dehydrogenation, which concurs with the experimental observation of an absence of the metal carbine products Cu⁺CH₂ and Ag⁺CH₂, which are short-lived. Also, it is elucidated that the higher-lying excitation states of Cu⁺ and Ag⁺ ions enable more favorable dehydrogenation process and C═C bond formation, shedding light on the plasma assistance of the essence.

Methane Activation by (MoO3 )5 O- Cluster Anions: The Importance of Orbital Orientation

The reactivity of the molybdenum oxide cluster anion (MoO₃ )₅ O^- , bearing an unpaired electron at a bridging oxygen atom (O_b ^.- ), towards methane under thermal collision conditions has been studied by mass spectrometry and density functional theory calculations. This reaction follows the mechanism of hydrogen atom transfer (HAT) and is facilitated by the O_b ^.- radical center. The reactivity of (MoO₃ )₅ O^- can be traced back to the appropriate orientation of the lowest unoccupied molecular orbitals (LUMO) that is essentially the 2p orbital of the O_b ^.- atom. This study not only makes up the blank of thermal methane activation by the O_b ^.- radical on negatively charged clusters but also yields new insights into methane activation by the atomic oxygen radical anions.

Room-Temperature Methane Activation Mediated by Free Tantalum Cluster Cations: Size-by-Size Reactivity

The energetics of small cationic tantalum clusters and their gas-phase adsorption and dehydrogenation reaction pathways with methane are investigated with ion-trap experiments and spin-density-functional-theory calculations. Ta_n⁺ clusters are exposed to methane under multicollision conditions in a cryogenic ring electrode ion-trap. The cluster size affects the reaction efficiency and the number of consecutively dehydrogenated methane molecules. Small clusters (n = 1-4) dehydrogenate CH₄ and concurrently eliminate H₂, while larger clusters (n > 4) demonstrate only molecular adsorption of methane. Unique behavior is found for the Ta⁺ cation, which dehydrogenates consecutively up to four CH₄ molecules and is predicted theoretically to promote formation of a [Ta(CH₂-CH₂-CH₂)(CH₂)]⁺ product, exhibiting C-C coupled groups. Underlying mechanisms, including reaction-enhancing couplings between potential energy surfaces of different spin-multiplicities, are uncovered.

Rhodium chemistry: A gas phase cluster study

Due to the extraordinary catalytic activity in redox reactions, the noble metal, rhodium, has substantial industrial and laboratory applications in the production of value-added chemicals, synthesis of biomedicine, removal of automotive exhaust gas, and so on. The main drawback of rhodium catalysts is its high-cost, so it is of great importance to maximize the atomic efficiency of the precious metal by recognizing the structure-activity relationship of catalytically active sites and clarifying the root cause of the exceptional performance. This Perspective concerns the significant progress on the fundamental understanding of rhodium chemistry at a strictly molecular level by the joint experimental and computational study of the reactivity of isolated Rh-based gas phase clusters that can serve as ideal models for the active sites of condensed-phase catalysts. The substrates cover the important organic and inorganic molecules including CH₄, CO, NO, N₂, and H₂. The electronic origin for the reactivity evolution of bare Rh_x ^q clusters as a function of size is revealed. The doping effect and support effect as well as the synergistic effect among heteroatoms on the reactivity and product selectivity of Rh-containing species are discussed. The ingenious employment of diverse experimental techniques to assist the Rh₁- and Rh₂-doped clusters in catalyzing the challenging endothermic reactions is also emphasized. It turns out that the chemical behavior of Rh identified from the gas phase cluster study parallels the performance of condensed-phase rhodium catalysts. The mechanistic aspects derived from Rh-based cluster systems may provide new clues for the design of better performing rhodium catalysts including the single Rh atom catalysts.

Carbide Dihydrides: Carbonaceous Species Identified in Ta4 + -Mediated Methane Dehydrogenation

The products of methane dehydrogenation by gas‐phase Ta₄⁺ clusters are structurally characterized using infrared multiple photon dissociation (IRMPD) spectroscopy in conjunction with quantum chemical calculations. The obtained spectra of [4Ta,C,2H]⁺ reveal a dominance of vibrational bands of a H₂Ta₄C⁺ carbide dihydride structure over those indicative for a HTa₄CH⁺ carbyne hydride one, as is unambiguously verified by studies employing various methane isotopologues. Because methane dehydrogenation by metal cations M⁺ typically leads to the formation of either MCH₂⁺ carbene or HMCH⁺ carbyne hydride structures, the observation of a H₂MC⁺ carbide dihydride structure implies that it is imperative to consider this often‐neglected class of carbonaceous intermediates in the reaction of metals with hydrocarbons.

Photoassisted Selective Steam and Dry Reforming of Methane to Syngas Catalyzed by Rhodium-Vanadium Bimetallic Oxide Cluster Anions at Room Temperature

Photoassisted steam reforming and dry (CO₂ ) reforming of methane (SRM and DRM) at room temperature with high syngas selectivity have been achieved in the gas-phase catalysis for the first time. The catalysts used are bimetallic rhodium-vanadium oxide cluster anions of Rh₂ VO_1-3 ^- . Both the oxidation of methane and reduction of H₂ O/CO₂ can take place efficiently in the dark while the pivotal step to govern syngas selectivity is photo-excitation of the reaction intermediates Rh₂ VO_2,3 CH₂ ^- to specific electronically excited states that can selectively produce CO and H₂ . Electronic excitation over Rh₂ VO_2,3 CH₂ ^- to control the syngas selectivity is further confirmed from the comparison with the thermal excitation of Rh₂ VO_2,3 CH₂ ^- , which leads to diversity of products. The atomic-level mechanism obtained from the well-controlled cluster reactions provides insight into the process of selective syngas production from the photocatalytic SRM and DRM reactions over supported metal oxide catalysts.

Single-Atom Pt+ Derived from the Laser Dissociation of a Platinum Cluster: Insights into Nonoxidative Alkane Conversion

In this study, we construct a 193 nm ultraviolet laser dissociation high-resolution mass spectrometry (HRMS) platform to produce Pt⁺ cations with high efficiency, which is in situ applied for monitoring the "Pt⁺ + alkanes" reactions (where alkanes include methane, ethane, and propane). The conversion intermediates and products could be accurately determined by an orbitrap detector with high resolution (up to 150 000). Importantly, methane conversion by Pt⁺ cations yields [Pt + ethane]⁺ and [Pt + ethylene]⁺ as the sole products formed via the cross-coupling reaction of the Pt-CH₂ intermediate with gaseous methane. However, the Pt⁺ cations promote only the nonoxidative dehydrogenation of ethane and propane to give the corresponding [Pt + alkenes]⁺ and [Pt + alkynes]⁺. The details of the reaction mechanism are corroborated by density functional theory (DFT) calculations. These results highlight the power of HRMS with the laser dissociation of metal clusters in the generation and reaction characterization of metal ions.

Single-Atom Catalysts for Electrochemical Hydrogen Evolution Reaction: Recent Advances and Future Perspectives

Hydrogen, a renewable and outstanding energy carrier with zero carbon dioxide emission, is regarded as the best alternative to fossil fuels. The most preferred route to large-scale production of hydrogen is by water electrolysis from the intermittent sources (e.g., wind, solar, hydro, and tidal energy). However, the efficiency of water electrolysis is very much dependent on the activity of electrocatalysts. Thus, designing high-effective, stable, and cheap materials for hydrogen evolution reaction (HER) could have a substantial impact on renewable energy technologies. Recently, single-atom catalysts (SACs) have emerged as a new frontier in catalysis science, because SACs have maximum atom-utilization efficiency and excellent catalytic reaction activity. Various synthesis methods and analytical techniques have been adopted to prepare and characterize these SACs. In this review, we discuss recent progress on SACs synthesis, characterization methods, and their catalytic applications. Particularly, we highlight their unique electrochemical characteristics toward HER. Finally, the current key challenges in SACs for HER are pointed out and some potential directions are proposed as well.

Direct Conversion of Methane with Carbon Dioxide Mediated by RhVO3 - Cluster Anions

Direct conversion of methane with carbon dioxide to value-added chemicals is attractive but extremely challenging because of the thermodynamic stability and kinetic inertness of both molecules. Herein, the first dinuclear cluster species, RhVO₃ ^- , has been designed to mediate the co-conversion of CH₄ and CO₂ to oxygenated products, CH₃ OH and CH₂ O, in the temperature range of 393-600 K. The resulting cluster ions RhVO₃ CO^- after CH₃ OH formation can further desorb the [CO] unit to regenerate the RhVO₃ ^- cluster, leading to the successful establishment of a catalytic cycle for methanol production from CH₄ and CO₂ (CH₄ +CO₂ →CH₃ OH+CO). The exceptional activity of Rh-V dinuclear oxide cluster (RhVO₃ ^- ) identified herein provides a new mechanism for co-conversion of two very stable molecules CH₄ and CO₂ .

The Comparison between Single Atom Catalysis and Surface Organometallic Catalysis

Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO₂ activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.

Selective Activation of the C-H Bond in Methane by Single Platinum Atomic Anions

Mass spectrometric analysis of the anionic products of interaction between platinum atomic anions, Pt^- , and methane, CH₄ and CD₄ , in a collision cell shows the preferred generation of [PtCH₄ ]^- and [PtCD₄ ]^- complexes and a low tendency toward dehydrogenation. [PtCH₄ ]^- is shown to be H-Pt-CH₃ ^- by a synergy between anion photoelectron spectroscopy and quantum chemical calculations, implying the rupture of a single C-H bond. The calculated reaction pathway accounts for the observed selective activation of methane by Pt^- . This study presents the first example of methane activation by a single atomic anion.

Identification of Active Sites and Structural Characterization of Reactive Ionic Intermediates by Cryogenic Ion Trap Vibrational Spectroscopy

Cryogenic ion trap vibrational spectroscopy paired with quantum chemistry currently represents the most generally applicable approach for the structural investigation of gaseous cluster ions that are not amenable to direct absorption spectroscopy. Here, we give an overview of the most popular variants of infrared action spectroscopy and describe the advantages of using cryogenic ion traps in combination with messenger tagging and vibrational predissociation spectroscopy. We then highlight a few recent studies that apply this technique to identify highly reactive ionic intermediates and to characterize their reactive sites. We conclude by commenting on future challenges and potential developments in the field.

Coupling of Methane and Carbon Dioxide Mediated by Diatomic Copper Boride Cations

The use of CH₄ and CO₂ to produce value-added chemicals via direct C-C coupling is a challenging chemistry problem because of the inertness of these two molecules. Herein, mass spectrometric experiments and high-level quantum-chemical calculations have identified the first diatomic species (CuB⁺ ) that can couple CH₄ with CO₂ under thermal collision conditions to produce ketene (H₂ C=C=O), an important intermediate in synthetic chemistry. The order to feed the reactants (CH₄ and CO₂ ) is important and CH₄ should be firstly fed to produce the C₂ product. Molecular-level mechanisms including control of product selectivity have been revealed for coupling of CH₄ with CO₂ under mild conditions.

Ménage-à-trois: single-atom catalysis, mass spectrometry, and computational chemistry

Genuine, single-atom catalysis can be realized in the gas phase and probed by mass spectrometry combined with computational chemistry.

Activation of C-H Bonds in Pt(+) + x CH4 Reactions, where x = 1-4: Identification of the Platinum Dimethyl Cation

Activation of C-H bonds in the sequential reactions of Pt(+) + x(CH4/CD4), where x = 1-4, have been investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theoretical calculations. Pt(+) cations are formed by laser ablation and exposed to controlled amounts of CH4/CD4 leading to [Pt,xC,(4x-2)H/D](+) dehydrogenation products. Irradiation of these products in the 400-2100 cm(-1) range leads to CH4/CD4 loss from the x = 3 and 4 products, whereas PtCH2(+)/PtCD2(+) products do not decompose at all, and x = 2 products dissociate only when formed from a higher order product. The structures of these complexes were explored theoretically at several levels of theory with three different basis sets. Comparison of the experimental and theoretical results indicate that the species formed have a Pt(CH3)2(+)(CH4)x-2/Pt(CD3)2(+)(CD4)x-2 binding motif for x = 2-4. Thus, reaction of Pt(+) with methane occurs by C-H bond activation to form PtCH2(+), which reacts with an additional methane molecule by C-H bond activation to form the platinum dimethyl cation. This proposed reaction mechanism is consistent with theoretical explorations of the potential energy surface for reactions of Pt(+) with one and two methane molecules.

Methane activation by gold-doped titanium oxide cluster anions with closed-shell electronic structures

The reactivity of closed-shell gas phase cluster anions AuTi₃O₇^- and AuTi₃O₈^- with methane under thermal collision conditions was studied by mass spectrometric experiments and quantum chemical calculations. Methane activation was observed with the formation of AuCH₃ in both cases, while the formation of formaldehyde was also identified in the reaction system of AuTi₃O₈^-. The cooperative effect of the separated Au⁺ and O^2- ions on the clusters induces the cleavage of the first C-H bond of methane. Further activation of the second C-H bond by a peroxide ion O₂^2- leads to the formation of formaldehyde. This study shows that closed-shell species on metal oxides can be reactive enough to facilitate thermal H-CH₃ bond cleavage and the subsequent conversion.

Highly Unsaturated Platinum and Palladium Carbenes PtC3 and PdC3 Isolated and Characterized in the Gas Phase

Carbenes of platinum and palladium, PtC3 and PdC3 , were generated in the gas phase through laser vaporization of a metal target in the presence of a low concentration of a hydrocarbon precursor undergoing supersonic expansion. Rotational spectroscopy and ab initio calculations confirm that both molecules are linear. The geometry of PtC3 was accurately determined by fitting to the experimental moments of inertia of twenty-six isotopologues. The results are consistent with the proposal of an autogenic isolobal relationship between O, Au(+) , and Pt atoms.

Highly Unsaturated Platinum and Palladium Carbenes PtC3 and PdC3 Isolated and Characterized in the Gas Phase

Carbenes of platinum and palladium, PtC3 and PdC3, were generated in the gas phase through laser vaporization of a metal target in the presence of a low concentration of a hydrocarbon precursor undergoing supersonic expansion. Rotational spectroscopy and ab initio calculations confirm that both molecules are linear. The geometry of PtC3 was accurately determined by fitting to the experimental moments of inertia of twenty-six isotopologues. The results are consistent with the proposal of an autogenic isolobal relationship between O, Au+, and Pt atoms.

Reactions of metal cluster anions with inorganic and organic molecules in the gas phase

Progress on the activation and transformation of important inorganic and organic molecules by negatively charged bare metal clusters as well as ligated systems with oxygen, carbon, and nitrogen, among others.

Vibrational spectroscopy and theory of Fe2+(CH4)n (n = 1–3)

Vibrational spectroscopy of size selected clusters reveals the extent to which interactions with Fe₂⁺ weaken proximate C–H bonds in methane ligands.

Improved catalytic activity of rhodium monolayer modified nickel (110) surface for the methane dehydrogenation reaction: a first-principles study

The catalytic activity of pure Ni (110) and single Rh layer deposited Ni (110) surface for the complete dehydrogenation of methane is theoretically investigated by means of gradient-corrected periodic density functional theory. A detailed kinetic study, based on the analysis of the optimal reaction pathway for the transformation of CH4 to C and H through four elementary steps (CH4 → CH3 + H; CH3 → CH2 + H; CH2 → CH + H; CH → C + H) is presented for pure Ni (110) and Rh/Ni (110) surfaces and compared with pure Rh (110) surface. Through systematic examination of adsorbed geometries and transition states, we show that single layer deposition of Rh on Ni (110) surface has a striking influence on lowering the activation energy barrier of the dehydrogenation reaction. Moreover, it is found that a pure Ni (110) surface has a tendency for carbon deposition on the catalytic surface during the methane dissociation reaction which decreases the stability of the catalyst. However, the deposition of carbon is largely suppressed by the addition of a Rh overlayer on the pure Ni (110) surface. The physical origin of stronger chemisorption of carbon on Ni (110) relative to Rh/Ni (110) has been elucidated by getting insight into the electronic structures and d-band model of the catalytic surfaces. Considering the balance in both the catalytic activity as well as the catalyst stability, we propose that the Rh/Ni (110) surface possesses much improved catalytic property compared to pure Ni (110) and pure Rh (110) surfaces.