Triphase Microfluidic-Directed Self-Assembly: Anisotropic Colloidal Photonic Crystal Supraparticles and Multicolor Patterns Made Easy

Multifunctional photonic microobjects with asymmetric response in radial direction and their anticounterfeiting performance

There are few explorations that have integrated multiple properties into photonic microobjects in a facile and controlled manner. In this work, we present a straightforward method to integrate different functions into individual photonic microobject. Droplet-based microfluidics was used to produce uniform droplets of an aqueous dispersion of monodispersed SiO2 nanoparticles (NPs). The droplets evolved into opal-structured photonic microballs upon complete evaporation of water. After infiltration of an aqueous solution of acrylamide (AAm) and acrylic acid (AAc) monomers into the interstices among SiO2 NPs, opal-structured SiO2 NPs/pAAm-co-AAc hydrogel composite photonic microballs were obtained upon UV irradiation. Afterwards, a wet etching process was introduced to etch the microballs in a controlled manner, yielding individual photonic microball composed of an SiO2 NPs/pAAm-co-AAc composite opal core and a neat pAAm-co-AAc shell. The pendant carboxylic acid groups in the skeleton of the hydrogel matrix were further utilized to react with positively charged compounds, such as Ruthenium compound containing fluorescent polymers. The resulting photonic microobjects eventually featured with localized stimulus-responsive properties and multiple colors under different modes. The multifunctional photonic microobjects were discovered to have fivefold of anticounterfeiting properties when used as building blocks for anticounterfeiting structures and may have other potential applications.

Janus structure hydrogels: recent advances in synthetic strategies, biomedical microstructure and (bio)applications

Janus structure hydrogels (JSHs) are novel materials. Their primary fabrication methods and various applications have been widely reported. JSHs are primarily composed of Janus particles (JNPs) and polysaccharide components. They exhibit two distinct physical or chemical properties, generating intriguing characteristics due to their asymmetric structure. Normally, one side (adhesive interface) is predominantly constituted of polysaccharide components, primarily serving excellent adhesion. On the other side (functional surface), they integrate diverse functionalities, concurrently performing a plethora of synergistic functions. In the biomedical field, JSHs are widely applied in anti-adhesion, drug delivery, wound healing, and other areas. It also exhibits functions in seawater desalination and motion sensing. Thus, JSHs hold broad prospects for applications, and they possess significant research value in nanotechnology, environmental science, healthcare, and other fields. Additionally, this article proposes the challenges and future work facing these fields.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface (SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting, and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally, the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Photonic microparticles, however, suffer from intense incoherent scattering and lack of suspension stability. We propose a microfluidic technique to generate hydrogel-shelled photonic microspheres that display enhanced color saturation and suspension stability. We created these microspheres using oil-in-water-in-oil (O/W/O) double-emulsion droplets with well-defined dimensions with a capillary microfluidic device. The inner oil droplet contains silica particles in a photocurable monomer, while the middle water droplet carries the hydrogel precursor. Within the inner oil droplet, silica particles arrange into crystalline arrays due to solvation-layer-induced interparticle repulsion. UV irradiation solidifies the inner photonic core and the outer hydrogel shell. The hydrogel shell reduces white scattering and enhances the suspension stability in water. Notably, the hydrogel precursor in the water droplet aids in maintaining the solvation layer, resulting in enhanced crystallinity and richer colors compared with microspheres from O/W single-emulsion droplets. These hydrogel-encased photonic microspheres show promise as structural colorants in water-based inks and polymer composites.

3D printing of non-iridescent structural color inks for optical anti-counterfeiting

In this work, structural color inks with practical significance in anti-counterfeiting applications have been successfully manufactured by facilely mixing SiO2@PDA@PHEMA hybrid colloidal particles with the mediated molecules of HEMA. The appropriate rheological properties of these photonic inks provide high viscosity and self-supporting performance, ensuring sufficient interaction between particles to form short-range ordered arrays during the mixing and shearing process and thus generating non-iridescent colors. The strong and broad uniform light absorption capabilities of polydopamine (PDA) not only suppress the incoherent multiple scattering of the photonic inks, but also impart surprising optical anti-counterfeiting properties, i.e. black color under ambient illumination and dazzling reflective coloration under strong illumination. With the 3D printing technique, complicated angle-independent patterns with visualization and high fidelity are expected to be fabricated with the as-prepared photonic inks for real-life applications in smart anti-counterfeiting labels, thus encoding encrypted information and selective color rendering accessories.

Structural Design of Intelligent Reversible Two-Way Structural Color Films

Structural color always shows a reversible switch between reflection and transmission states when viewed from different angles, attracting increasing attention in display applications. However, this switching between reflection and transmission states of structural color suffers from the inherent lack of autonomous regulation, which is unmanageable in the case of different application scenarios. Here, we design an intelligent two-way structural color film which can reversibly change its color when applied with an extra stimulation such as voltage, heat signal, or light. A special structural feature contains a traditional photonic crystal film of polystyrene (PS) microspheres assembled by smart windows. Remarkably, our structural color film shows a prominent polarization sensitivity, and the angle dependence of the structural color broadens the gamut of display color demonstrated by both finite element theoretical analysis and experimental observation. Prospectively, this hierarchically designed film provides a promising pathway toward next-generation multicolor displays and smart windows.

Versatile Mesoporous Microblocks Prepared by Pattern-Induced Cracking of Colloidal Films

Mesoporous microparticles have the potential to be used in various fields, such as energy generation, sensing, and the environmental field. Recently, the process of making homogeneous microparticles in an economical and environmentally friendly way has gained much attention. Herein, rectangular mesoporous microblocks of various designs are produced by manipulating the fragmentation of colloidal films consisting of micropyramids while controlling the notch angles of pyramidal edges. During calcination of the colloidal films, cracks are generated in the valleys of micropyramids acting as notches, and the angle of notches can be controlled by the prepattern underneath the micropyramids. By changing the location of notches with sharp angles, the shape of microblocks can be controlled with excellent uniformity. After detaching the microblocks from substrates, mesoporous microparticles of various sizes with multiple functions are easily produced. This study demonstrates anti-counterfeiting functions by encoding the rotation angles of rectangular microblocks of various sizes. In addition, the mesoporous microparticles can be utilized for separating desired chemicals mixed with chemicals of different charges. The method of fabricating size-tunable functionalized mesoporous microblocks can be a platform technology to prepare special films and catalysts and for environmental applications.

Photo-and thermo-regulation by photonic crystals for extended longevity of C. elegans

Methods allowing light energy to be modulated in a controllable fashion are potentially important for finding the correlation between light-related environmental factors and aging-related lifespan. Here, we report photo- and thermo-regulation based on photonic crystals (PCs) for extended longevity of C. elegans. We show that PCs can function as a regulator of visible spectrum to tune photonic energy received by C.elegans. We provide direct evidence that lifespan depends on photonic energy, and the use of PCs reflecting blue light (440-537nm) gives 8.3% increasement in lifespan. We demonstrate that the exposure to modulated light alleviates photo-oxidative stress and unfolded-protein response. We realize reflective passive cooling temperature using PCs, and favorable low temperature could be created for worms to extend lifespan. This work offers a new path based on PCs to resist negative effects light and temperature for longevity, provides an available platform for studying the role of light in aging.

Centrifugation-Assisted Growth of Single-Crystalline Grains in Microcapsules

Colloidal crystals have been tailored in a format of microspheres to use them as a building block to construct macroscopic photonic surfaces. However, the polycrystalline grains grown from the spherical surface usually exhibit low reflectivity. Although single-crystalline microspheres have been produced, it is difficult to control the crystal orientation. Here, we design spherical microcapsules with density anisotropy that contain single-crystalline grains along the heavy side. The microcapsules spontaneously align to have a heavy side down under the action of gravity and display a bright and uniform reflection color from the entire surface of the grains. Key to the success is the use of gentle centrifugal force to initiate nucleation and grow single-crystalline grains from the heavy side through depletion attraction. The microcapsules have density anisotropy due to the heterogeneity of the shell thickness, which causes them to self-align under centrifugation. At the same time, particles are accumulated on the heavy side, which produces many tiny grains on the heavy side immediately after the centrifugation. With controlled depletion attraction among particles, only a few grains survive during postincubation through Ostwald ripening, and one or a few giant single-crystalline grains are finally produced along the heavy side of each microcapsule.

Microfluidic Methods in Janus Particle Synthesis

Janus particles have been at the center of attention over the years due to their asymmetric nature that makes them superior in many ways to conventional monophase particles. Several techniques have been reported for the synthesis of Janus particles; however, microfluidic-based techniques are by far the most popular due to their versatility, rapid prototyping, low reagent consumption and superior control over reaction conditions. In this review, we will go through microfluidic-based Janus particle synthesis techniques and highlight how recent advances have led to complex functionalities being imparted to the Janus particles.

Microfluidics-Assisted Fabrication of Dual Stopband Photonic Microcapsules and Their Applications for Anticounterfeiting

The assembly of two different kinds of colloidal particle-based photonic structures into an individual micro-object can achieve multifunctionality. In this study, core–shell photonic microcapsules with dual structural colors and photonic stop bands were prepared through a standard microfluidic technique. Photocurable resin suspension of silica nanoparticles and an aqueous suspension of nanogels were used as shell and core parts of microcapsules, respectively. The structural colors of shells and cores can be tuned by adjusting the concentrations of silica nanoparticles and soft nanogels in their corresponding suspensions. The individual microcapsules possess two distinct stop bands when the two suspensions are combined appropriately. Remarkably, the color information of the core part cannot be directly viewed at a macroscopic level (such as visual inspection) but can be detected at a microscopic scale (such as optical microscopy observation). The color information hidden enables the capability for information encryption and has potentially critical applications in anti-counterfeiting, display, and other fields.

Complex Suspended Janus Droplets Constructed through Solvent Evaporation-Induced Phase Separation at the Air-Liquid Interface

Phase separation technology has attracted extensive scientific interest because of its intriguing structure changes during the phase separation process. Phase separation inside emulsion droplets in continuous surroundings has been well studied in recent years. Many investigations have also been conducted to study the droplet phase separation phenomena in noncontinuous surroundings. However, studies on the phase separation phenomena and the spreading behavior of suspended droplets at the air-liquid interface were rarely reported. In this study, PEGDA-glycerol suspended Janus droplets with a patchy structure were produced by utilizing solvent evaporation-induced droplet phase separation at the air-liquid interface. By altering the glycerol/PEGDA volume ratio, the initial proportion of ethanol, and the concentration of surfactants, suspended droplets with different morphologies can be achieved, which include filbert-shaped droplets (FSDs), half lotus seedpod single-phase Janus droplets (HLSDs), lotus seedpod single-phase Janus droplets (LSDs), lotus seedpod-shaped droplets (LSSDs), multiple-bulge droplets (MBDs), and half gourd-shaped droplets (HGSDs). A patchy structure was generated at the air-droplet interface, which was attributed to the Marangoni stresses induced by nonuniform evaporation. Furthermore, a modified spreading coefficient theory was constructed and verified to illustrate the phase separation at the air-droplet interface, which was the first research to predict the phase separation phenomena at the air-liquid interface via spreading coefficients theory. Moreover, we studied the factors that led to the droplets being able to float by designing the combined parameters, including three interfacial tensions and the equilibrium contact angles. Therefore, a simple and versatile strategy for creating suspended Janus droplets has been developed for the first time, which holds significant potential in a variety of applications for material synthesis, such as the electrospinning solution behavior when sprayed from the nozzle into the air.

Designing photonic microparticles with droplet microfluidics

Photonic materials with a periodic change of refractive index show unique optical properties through wavelength-selective diffraction and modulation of the optical density of state, which is promising for various optical applications. In particular, photonic structures have been produced in the format of microparticles using emulsion templates to achieve advanced properties and applications beyond those of a conventional film format. Photonic microparticles can be used as a building block to construct macroscopic photonic materials, and the individual microparticles can serve as miniaturized photonic devices. Droplet microfluidics enables the production of emulsion drops with a controlled size, composition, and configuration that serve as the optimal confining geometry for designing photonic microparticles. This feature article reviews the recent progress and current state of the art in the field of photonic microparticles, covering all aspects of microfluidic production methods, microparticle geometries, optical properties, and applications. Two distinct bottom-up approaches based on colloidal assembly and liquid crystals are, respectively, discussed and compared.

Janus Photonic Microspheres with Bridged Lamellar Structures via Droplet-Confined Block Copolymer Co-Assembly

Artificial self-assembly systems typically exhibit limited capability in creating nature-inspired complex materials with advanced functionalities. Here, an effective co-assembly strategy is demonstrated for the facile creation of complex photonic structures with intriguing light reflections. Two different lipophilic and amphiphilic bottlebrush block copolymers (BCPs) are placed within shrinking droplets to enable a cooperative working mechanism of microphase segregation and organized spontaneous emulsification, respectively. Layer assemblies of the lipophilic BCP and uniform water nanodroplets stabilized by the bottlebrush surfactant are both generated, and co-assembled into a bridged lamellar structure with the alternating arrangement of layers and closely packed nanodroplet arrays. Janus microspheres with diverse dual optical characteristics are successfully fabricated, and reflected wavelengths of light are highly tunable simply by changing the formulation or molecular weight of BCP.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Janus Nanoparticles: From Fabrication to (Bio)Applications

Janus nanoparticles (JNPs) refer to the integration of two or more chemically discrepant composites into one structure system. Studies into JNPs have been of significant interest due to their interesting characteristics stemming from their asymmetric structures, which can integrate different functional properties and perform more synergetic functions simultaneously. Herein, we present recent progress of Janus particles, comprehensively detailing fabrication strategies and applications. First, the classification of JNPs is divided into three blocks, consisting of polymeric composites, inorganic composites, and hybrid polymeric/inorganic JNPs composites. Then, the fabrication strategies are alternately summarized, examining self-assembly strategy, phase separation strategy, seed-mediated polymerization, microfluidic preparation strategy, nucleation growth methods, and masking methods. Finally, various intriguing applications of JNPs are presented, including solid surfactants agents, micro/nanomotors, and biomedical applications such as biosensing, controlled drug delivery, bioimaging, cancer therapy, and combined theranostics. Furthermore, challenges and future works in this field are provided.

Particle Size Determines the Shape of Supraparticles in Self-Lubricating Ternary Droplets

Supraparticles are large clusters of much smaller colloidal particles. Controlling the shape and anisotropy of supraparticles can enhance their functionality, enabling applications in fields such as optics, magnetics, and medicine. The evaporation of self-lubricating colloidal ouzo droplets is an easy and efficient strategy to create supraparticles, overcoming the problem of the "coffee-stain effect" during drop evaporation. Yet, the parameters that control the shape of the supraparticles formed in such evaporating droplets are not fully understood. Here, we show that the size of the colloidal particles determines the shape of the supraparticle. We compared the shape of the supraparticles made of seven different sizes of spherical silica particles, namely from 20 to 1000 nm, and of the mixtures of small and large colloidal particles at different mixing ratios. Specifically, our in situ measurements revealed that the supraparticle formation proceeds via the formation of a flexible shell of colloidal particles at the rapidly moving interfaces of the evaporating droplet. The time t_c0 when the shell ceases to shrink and loses its flexibility is closely related to the size of particles. A lower t_c0, as observed for smaller colloidal particles, leads to a flat pancake-like supraparticle, in contrast to a more curved American football-like supraparticle from larger colloidal particles. Furthermore, using a mixture of large and small colloidal particles, we obtained supraparticles that display a spatial variation in particle distribution, with small colloids forming the outer surface of the supraparticle. Our findings provide a guideline for controlling the supraparticle shape and the spatial distribution of the colloidal particles in supraparticles by simply self-lubricating ternary drops filled with colloidal particles.

Designable structural coloration by colloidal particle assembly: from nature to artificial manufacturing

Structural color attracts considerable scientific interests and industrial explorations in various fields for the eco-friendly, fade-resistant, and dynamic advantages. After the long-period evolution, nature has achieved the optimized color structures at various length scales, which has inspired people to learn and replicate them to improve the artificial structure color. In this review, we focus on the design of artificial structural colors based on colloidal particle assembly and summarize the functional bioinspired structure colors. We demonstrate the design principles of biomimetic structural colors via the precise structure engineering and typical bottom-up methods. Some main applications are outlined in the following chapter. Finally, we propose the existing challenges and promising prospects. This review is expected to introduce the recent design strategies about the artificial structure colors and provide the insights for its future development.

Photonic Janus Balls with Controlled Magnetic Moment and Density Asymmetry

Colloidal crystals show structural colors through wavelength-selective diffraction at photonic stopbands. Here, we design photonic Janus balls with a controlled magnetic moment for programmable structural color switching. The Janus balls are produced from microfluidically produced paired drops of two distinct photocurable resins. The lighter resin contains magnetic nanoparticles and carbon black, whereas heavier one contains silica particles at a high volume fraction. The paired drops spontaneously align vertically due to the density asymmetry. The magnetic moment is assigned in the vertically aligned drops by aligning magnetic nanoparticles with an external field and capturing them through photopolymerization. Silica particles in the heavier compartment spontaneously form crystalline arrays due to interparticle repulsion, developing structural colors. The resulting photonic Janus balls vertically align without an external field, like a roly-poly toy, so that carbon-black-laden compartments face upward. With an external magnetic field, the Janus balls align their magnetic moment to the field and display structural colors. Importantly, the direction of the magnetic moment is set by the direction of the external field during photopolymerization, which enables the simultaneous manipulation of orientations of distinct photonic Janus balls in a programmed manner. These photonic Janus balls are potentially useful as active color inks for anti-counterfeiting tags.

Dielectrophoretic Manipulation of Janus Particle in Conductive Media for Biomedical Applications

Janus particles are applied to many fields including biomedical applications. To expand the usability of Janus particles, a technique to manipulate the particle movement is required. A dielectrophoresis (DEP) method can be a promising candidate; however, independent manipulation or separation of Janus particle by DEP is still challenging. Additionally, DEP of Janus particles in conductive media is important especially for biomedical applications where ion-rich media are typically used. Here, the experimental results of DEP-induced transport and separation of the Janus particle in conductive media are presented. To predict the DEP behavior, the Clausius-Mossotti (CM) factors of both Janus and homogeneous particles are calculated, depending on the alternating current (AC) frequency and medium conductivity. The Janus particles show the positive-DEP behavior at the entire AC frequency region tested due to the metal-coated half surface. On the other hand, the homogeneous particles show the negative-DEP behavior at the high AC frequency or in conductive media. Additionally, in the conductive media, an electrohydrodynamic flow hinders the DEP-driven particle transport below MHz AC frequencies. Finally, the separation of the Janus particles from the homogeneous ones is experimentally demonstrated and the separation efficiency is discussed based on the evaluation parameters established in this study.

Three-dimensional ordered macroporous magnetic photonic crystal microspheres for enrichment and detection of mycotoxins (I): Droplet-based microfluidic self-assembly synthesis

Ordered porous materials are attracting enormous attention due to their uniform pore structures, particularly the magnetic photonic crystal microspheres (PCMs) which not only possess unique photonic crystal structure but also can achieve separation easily based on magnet. Here, a two-phase microfluidic self-assembly synthetic system was established simply and employed for the preparation of three dimensional PCMs (3DPCMs) by using the emulsion droplet approach. One phase (dispersed phase) was an aqueous emulsion containing Fe₃O₄, silica (SiO₂) and polystyrene (PS) nanoparticles; another phase (continuous phase) was pure silicone oil. The droplets were formed by introducing the dispersed phase into the continuous phase through a tee valve. By heating the droplets, the water would evaporate and the nanoparticles would finally assemble into solid microspheres, which could be changed into macroporous 3DPCMs after removal of the PS nanoparticles by calcination. The contents and particle sizes of Fe₃O₄, SiO₂ and PS nanoparticles in the dispersed phase were investigated in detail and optimized to prepare macroporous magnetic 3DPCMs with high quality. The morphologies, surface crystal structure, magnetic property, particle size distribution, specific surface area and pore size of the macroporous magnetic 3DPCMs were characterized. The expected 3DPCM displayed regular and uniform photonic crystal structure, narrow particle size distribution and strong magnetic property. The macroporous magnetic 3DPCMs grafted with vomitoxin (DON)-antibodies could be applied for selective enrichment of DON in real samples.

Asymmetric Modification of Carbon Nanotube Arrays with Thermoresponsive Hydrogel for Controlled Delivery

In this work, bipolar electrochemistry is used to perform wireless indirect electrodeposition of two different polymer coatings on both sides of carbon nanotube arrays. Using a thermoresponsive hydrogel on one side and an inert insoluble polymer on the other side, it is possible to generate, in a single step, a nanoporous reservoir with Janus character closed on one side by a thermoresponsive membrane. The thermoresponsive polymer, poly(N-isopropylacrylamide) (pNIPAM), is generated by the local reduction of persulfate ions, which initiates radical polymerization of NIPAM. Electrophoretic paint (EP) is chosen as an inert polymer. It is deposited by precipitation because of a local decrease in pH during water oxidation. Both polymers can be deposited simultaneously on opposite sides of the bipolar electrode during the application of the electric field, yielding a double-modified Janus object. Moreover, the length and thickness of the polymer layers can be controlled by varying the electric field and the deposition time. This concept is applied to vertically aligned carbon nanotube arrays (VACNTs), trapped inside an anodic aluminum oxide membrane, which can further be used as a smart reservoir for chemical storage and release. A fluorescent dye is loaded in the VACNTs and its release is studied as a function of temperature. Low temperature, when the hydrogel layer is in the swollen state, allows diffusion of the molecule. Dye release occurs on the hydrogel-modified side of the VACNTs. At high temperatures, when the hydrogel layer is in the collapsed state, dye release is blocked because of the impermeability of the pNIPAM layer. This concept paves the way toward the design of advanced devices in the fields of drug storage and directed delivery.

Microfluidics-Assisted Assembly of Injectable Photonic Hydrogels toward Reflective Cooling

Development of fast curing and easy modeling of colloidal photonic crystals is highly desirable for various applications. Here, a novel type of injectable photonic hydrogel (IPH) is proposed to achieve self-healable structural color by integrating microfluidics-derived photonic supraballs with supramolecular hydrogels. The supramolecular hydrogel is engineered via incorporating β-cyclodextrin/poly(2-hydroxypropyl acrylate-co-N-vinylimidazole) (CD/poly(HPA-co-VI)) with methacrylated gelatin (GelMA), and serves as a scaffold for colloidal crystal arrays. The photonic supraballs derived from the microfluidics techniques, exhibit excellent compatibility with the hydrogel scaffolds, leading to enhanced assembly efficiency. By virtue of hydrogen bonds and host-guest interactions, a series of self-healable photonic hydrogels (linear, planar, and spiral assemblies) can be facilely assembled. It is demonstrated that the spherical symmetry of the photonic supraballs endows them with identical optical responses independent of viewing angles. In addition, by taking the advantage of angle independent spectrum characteristics, the IPH presents beneficial effects in reflective cooling, which can achieve up to 17.4 °C in passive solar reflective cooling. The strategy represents an easy-to-perform platform for the construction of IPH, providing novel insights into macroscopic self-assembly toward thermal management applications.

Colloidal Crystals from Microfluidics

Colloidal crystals are of great interest to researchers because of their excellent optical properties and broad applications in barcodes, sensors, displays, drug delivery, and other fields. Therefore, the preparation of high quality colloidal crystals in large quantities with high speed is worth investigating. After decades of development, microfluidics have been developed that provide new choices for many fields, especially for the generation of functional materials in microscale. Through the design of microfluidic chips, colloidal crystals can be prepared controllably with the advantages of fast speed and low cost. In this Review, research progress on colloidal crystals from microfluidics is discussed. After summarizing the classifications, the generation of colloidal crystals from microfluidics is discussed, including basic colloidal particles preparation, and their assembly inside or outside of microfluidic devices. Then, applications of the achieved colloidal crystals from microfluidics are illustrated. Finally, the future development and prospects of microfluidic-based colloidal crystals are summarized.

Mechanochromic and thermochromic shape memory photonic crystal films based on core/shell nanoparticles for smart monitoring

Shape memory photonic crystals (SMPCs) combining the main characteristics of shape memory materials and photonic crystals have drawn increasing research interest. In sharp contrast to traditional responsive photonic crystals, the temporary shape of SMPCs can be "frozen" and photonic configurations can be modulated by temperature. However, the large-scale fabrication of SMPCs still remains a big challenge, making the practical application difficult. Herein novel scalable SMPC films with both mechanochromic and thermochromic properties are reported. Unlike traditional template-based methods resulting in only a small size, SMPC films are fabricated by a facile hot-pressing method and post-photocuring technology to give large-area freestanding polymer films. The films are mechanically robust and flexible, featuring an excellent structural color which can be changed upon stretching, similar to the color change process of chameleons in response to the environment. The blue-shift of the reflection peak up to 120 nm can be observed when the film is stretched. The films can be reversibly stretched and recovered in 25 cycles without obvious changes in reflection spectra. The temporary shape accompanied by tremendous color changes in the corresponding SMPC films after mechanical stress induced hot programming could be simply fixed by cooling the structure below the glass transition temperature of the polymer matrix. Incorporated programmed optical properties could afterwards be erased by temperature, and initial optical properties could be fully restored. Based on the fully reversible programmable shape as well as optical properties, the investigated SMPC films are expected to be promising candidates for various potential applications, such as smart monitoring, sensors, anti-counterfeiting, and displays.

Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays

While structural color materials have nonfading properties and contribute significantly to the sustainable development of pigments or dyes, they are plagued by low color saturation and limited color tunability. Here, we describe a new type of spherical colloidal photonic crystals (CPCs) prepared by a droplet-based microfluidic strategy, featuring enhanced color saturation and tunable structural colors. Methyl viologen (MV) functionalized SiO₂ colloids were synthesized and used for the preparation of CPCs in microdroplets. Because of the absorption of incoherently scattered light by MV, the ratio of peak-to-background amplitude in the reflectance spectra of CPCs is increased, leading to brilliant structural color with enhanced saturation. The lattice plane exposure of spherical CPCs depends on the refractive index contrast between the filling medium and SiO₂ building blocks, and this offers an alternative way to tune the structural color in a spherical CPC. Accordingly, a dynamic optical display was constructed, providing valuable insights to the future development of structural color-based sensors, surface coatings, or displays.

Patterned SiO2/Polyurethane Acrylate Inverse Opal Photonic Crystals with High Color Saturation and Tough Mechanical Strength

Patterned structural color photonic crystals (PCs) based on periodic photonic nanostructures have attracted great interest in developing high-performance sensors and other smart optical materials as well as tunable structurally colored fashion textiles. However, previously reported patterned PCs with both high color saturation and tough mechanical strength were difficult to achieve, which restricts their practical applications. Herein, arbitrarily patterned silica/polyurethane acrylate (SiO₂/PUA) inverse opal photonic crystals (IOPCs) with high color saturation and tough mechanical strength were innovatively designed and fabricated by writing with photopolymerizable PUA "ink" on a self-assembled hollow SiO₂ PC template. The high color saturation of the prepared SiO₂/PUA IOPCs originated from the high refractive index contrast between the encapsulated air-filled core and the SiO₂/PUA composite skeleton. The cross-linked flexible PUA matrix tightly warped the self-assembled hollow SiO₂ nanospheres together, endowing the obtained SiO₂/PUA IOPCs a structural color pattern with tough mechanical strength. The structural colors of SiO₂/PUA IOPCs could be finely tuned by regulating their basic parameters, and a redshift in the resultant structural color was observed due to an increase in the lattice constant when increasing the core size and/or shell thickness of the hollow SiO₂ nanospheres.

Temperature and composition induced morphology transition of Cerberus emulsion droplets

HYPOTHESIS

Various advanced geometries are endowed by the unique structure of "three rooms" of immiscible oils composing the Cerberus droplets. Adjustable interfacial properties and tunable volume ratio in the four-liquid system render it possible to realize the controlled morphology transition by the variation of temperature and emulsion composition.

EXPERIMENTS

Cerberus emulsions are prepared in batch scale by traditional one-step vortex mixing, employing the oil combinations of methacryloxypropyl dimethyl silicone (DMS)/2-(perfluorooctyl) ethyl methacrylate (PFOEMA)/vegetable oil (VO). Emulsifier of pluoronic F127, a temperature sensitive surfactant is applied. Stereoscopic topological phase diagram as functions of temperature and composition are plotted. Numerical calculations on the droplet morphology including interface curvature, contact angle, and volume fraction of each domain are performed.

FINDINGS

Four primary regions with specific morphologies, i.e. "VO > DMS < PFOEMA", "VO > DMS > PFOEMA", "VO < DMS > PFOEMA", and finally "VO < DMS < PFOEMA" are obtained. Extended volume ratio range of three lobes, from about 0.03 to 23.3, is achieved and precisely controlled based on the three-phase diagram. What is more, the structural features are found to be thermodynamically determined by the minimization of interfacial energy, though the emulsion is prepared kinetically by vortex mixing. The findings are attractive in the fields of materials synthesis and microreactors.

Hydrophobic Poly(tert-butyl acrylate) Photonic Crystals towards Robust Energy-Saving Performance

Photonic crystals (PCs) have been widely applied in optical, energy, and biological fields owing to their periodic crystal structure. However, the major challenges are easy cracking and poor structural color, seriously hindering their practical applications. Now, hydrophobic poly(tert-butyl acrylate) (P(t-BA)) PCs have been developed with relatively lower glass transition temperature (T_g ), large crack-free area, excellent hydrophobic properties, and brilliant structure color. This method based on hydrophobic groups (tertiary butyl groups) provides a reference for designing new kinds of PCs via the monomers with relatively lower T_g . Moreover, the P(t-BA) PCs film were applied as the photoluminescence (PL) enhanced film to enhance the PL intensity of CdSe@ZnS QDs by 10-fold in a liquid-crystal display (LCD) device. The new-type hydrophobic force assembled PCs may open an innovative avenue toward new-generation energy-saving devices.

2D Freestanding Janus Gold Nanocrystal Superlattices

2D freestanding nanocrystal superlattices represent a new class of advanced metamaterials in that they can integrate mechanical flexibility with novel optical, electrical, plasmonic, and magnetic properties into one multifunctional system. The freestanding 2D superlattices reported to date are typically constructed from symmetrical constituent building blocks, which have identical structural and functional properties on both sides. Here, a general ligand symmetry-breaking strategy is reported to grow 2D Janus gold nanocrystal superlattice sheets with nanocube morphology on one side yet with nanostar on the opposite side. Such asymmetric metallic structures lead to distinct wetting and optical properties as well as surface-enhanced Raman scattering (SERS) effects. In particular, the SERS enhancement of the nanocube side is about 20-fold of that of the nanostar side, likely due to the combined "hot spot + lightening-rod" effects. This is nearly 700-fold of SERS enhancement as compared with the symmetric nanocube superlattices without Janus structures.

Gas-Shearing Fabrication of Multicompartmental Microspheres: A One-Step and Oil-Free Approach

Multicompartmental microparticles (MCMs) have attracted considerable attention in biomedical engineering and materials sciences, as they can carry multiple materials in the separated phases of a single particle. However, the robust fabrication of monodisperse, highly compartmental MCMs at the micro- and nanoscales remains challenging. Here, a simple one-step and oil-free process, based on the gas-flow-assisted formation of microdroplets ("gas-shearing"), is established for the scalable production of monodisperse MCMs. By changing the configuration of the needle system and gas flow in the spray ejector device, the oil-free gas-shearing process easily allows the design of microparticles consisting of two, four, six, and even eight compartments with a precise control over the properties of each compartment. As oils and surfactants are not used, the gas-shearing method is highly cytocompatible. The versatile applications of such MCMs are demonstrated by producing a magnetic microrobot and a biocompatible carrier for the coculturing of cells. This research suggests that the oil-free gas-shearing strategy is a reliable, scalable, and biofriendly process for producing MCMs that may become attractive materials for biomedical applications.

Rapid preparation of auto-healing gels with actuating behaviour

Gels with multiple stimuli-responsive actuating behaviour have shown great potential in many applications. Nevertheless, facile approaches to rapidly preparing gel actuators are still highly needed, and obtaining gels possessing both actuating and auto-healing capabilities remains a challenge. Herein, we report the rapid preparation of gel actuators with a self-healing ability. Dual-component gels, composed of poly(BA-co-VI-co-AM) (G-1) and poly(BA-co-AA-co-AM/β-CD) (G-2) (BA = butyl acrylate, VI = N-vinyl imidazole, AM = acrylamide, AA = acrylic acid, β-CD = β-cyclodextrin), are prepared within 10 minutes (min) via biphase frontal polymerization (FP). Both G-1 and G-2 gels show excellent intrinsic self-healing properties based on hydrogen bonds, with healing efficiencies of 91% and 97%, respectively; self-healing between G-1 and G-2 also occurs due to hydrogen bonding and host-guest interactions. Moreover, dual-component gels, in terms of G-1 and G-2 bilayer gel flowers and strips, heterogeneous healed bilayer gel strips, and microfluidic-directed bilayer gel microsphere ensembles, all show actuating behaviour in acidic, alkaline and organic solutions, with actuation degrees up to 96% in 5 min. The actuation mechanism is also proposed. This work might provide new insights into fast synthesis of self-healing dual-component gels towards application in the actuator field.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

Batch-Scale Preparation of Reverse Janus Emulsions

A strategy is proposed to produce novel (W1 + W2)/O reverse Janus emulsions in batch scale simply by one-step vortex mixing. Aqueous two-phase systems (ATPSs), i.e., two immiscible aqueous phases dominated by sodium carbonate and ethanol, respectively, are employed as inner phases and vegetable oil (VO) as continuous phase. The geometry of the Janus droplets, although formed as a result of a kinetic process, is tunable and controllable easily by adjusting the composition of ATPSs based on three-phase diagram. Reducing the relatively higher water/oil interfacial tensions to a comparable value of water/water interface, which is extremely low in order of 0.1 mN/m, is achieved by employing a fluorocarbon surfactant. Moreover, the weak acid-induced deprotonation of the fatty acid in the VO phase due to the presence of sodium carbonate also contributes to the lower water/oil interfacial tension. The total free-energy values calculated verify the overwhelmingly favored Janus geometry, which indicates that this topology is heavily preformed as local equilibrium state. The approach proposed provides vehicle for the synthesis of aqueous-based materials with various advanced morphologies.

Hierarchical Photonic Pigments via the Confined Self-Assembly of Bottlebrush Block Copolymers

Hierarchical, structurally colored materials offer a wide variety of visual effects that cannot be achieved with standard pigments or dyes. However, their fabrication requires simultaneous control over multiple length-scales. Here we introduce a robust strategy for the fabrication of hierarchical photonic pigments via the confined self-assembly of bottlebrush block copolymers within emulsified microdroplets. The bottlebrush block copolymer self-assembles into highly ordered concentric lamellae, giving rise to a near perfect photonic multilayer in the solid state, with reflectivity up to 100%. The reflected color can be readily tuned across the whole visible spectrum by either altering the molecular weight or by blending the bottlebrush block copolymers. Furthermore, the developed photonic pigments are responsive, with a selective and reversible color change observed upon swelling in different solvents. Our system is particularly suited for the scalable production of photonic pigments, arising from their rapid self-assembly mechanism and size-independent color.

A Two-Step Strategy for Fabrication of Biocompatible 3D Magnetically Responsive Photonic Crystals

Extremely stable and biocompatible 3D magnetically responsive photonic crystals (MRPCs) are successfully prepared in aqueous solution. Classic hydrothermal synthesis was applied for preparation of the Fe₃O₄@C core. Modified Stöber method was then employed for synthesis of the different size of Fe₃O₄@C@SiO₂. Unlike the traditional magnetic nanoparticles, the highly negative charged superparamagnetic nanospheres (SMNs), i.e., the double-shell structure Fe₃O₄@C@SiO₂ are capable of rapidly self-assembling into 3D MRPCs with full visible and various colors that can be periodically and reversibly tuned under different kinds of external magnetic fields (EMFs) within 1 s. The assembling behavior and mechanism of the 3D MRPCs under EMF were monitored and analyzed. The preparation is simple and the size of the SMN is easily controllable by adjusting the amount of catalyst. Compared with the previous works, the synthesized 3D MRPCs are hydrophilic, and exhibit extremely high stability after 6-month storage. To conclude, our study provides an effective two-step strategy for fabrication of biocompatible 3D MRPCs and it reveals great potentials in biological fields.

Transparent thermo-responsive poly(N-isopropylacrylamide)-l-poly(ethylene glycol)acrylamide conetwork hydrogels with rapid deswelling response

Transparent thermo-responsive poly(N-isopropylacrylamide)-l-poly(ethylene glycol)acrylamide conetwork hydrogels with rapid deswelling response are developed with multi-arm star poly(ethylene glycol)acrylamide as a cross-linker.

Versatile Hydrogel Ensembles with Macroscopic Multidimensions

Methods allowing construction of macroscopic programmed materials in a flexible and efficient fashion are highly desirable. However, the existing approaches are far removed from such materials. A new self-healing-driven assembly (SHDA) strategy to fabricate various programmed materials by using uniform gel beads (microsize of 212 µm or millimeter size of 4 mm) as building blocks is described here. In virtue of hydrogen bonds and host-guest interactions between gel beads, a series of linear, planar, and 3D beaded assemblies are fabricated via SHDA in microfluidic channels in a continuous and controlled manner. From the perspective of practical applications, the use of gel assemblies is exploited for tissue engineering with controlled cells coculture, as well as light conversion materials toward white-light-emitting diodes (WLEDs). The SHDA strategy developed in this study gives a new insight into the facile and rapid fabrication of various programmed materials toward biological tissue and optoelectronic device.