Controlling nanostructures of mesoporous silica fibers by supramolecular assembly of genetically modifiable bacteriophages

Highly Aligned Ternary Nanofiber Matrices Loaded with MXene Expedite Regeneration of Volumetric Muscle Loss

Current therapeutic approaches for volumetric muscle loss (VML) face challenges due to limited graft availability and insufficient bioactivities. To overcome these limitations, tissue-engineered scaffolds have emerged as a promising alternative. In this study, we developed aligned ternary nanofibrous matrices comprised of poly(lactide-co-ε-caprolactone) integrated with collagen and Ti3C2Tx MXene nanoparticles (NPs) (PCM matrices), and explored their myogenic potential for skeletal muscle tissue regeneration. The PCM matrices demonstrated favorable physicochemical properties, including structural uniformity, alignment, microporosity, and hydrophilicity. In vitro assays revealed that the PCM matrices promoted cellular behaviors and myogenic differentiation of C2C12 myoblasts. Moreover, in vivo experiments demonstrated enhanced muscle remodeling and recovery in mice treated with PCM matrices following VML injury. Mechanistic insights from next-generation sequencing revealed that MXene NPs facilitated protein and ion availability within PCM matrices, leading to elevated intracellular Ca2+ levels in myoblasts through the activation of inducible nitric oxide synthase (iNOS) and serum/glucocorticoid regulated kinase 1 (SGK1), ultimately promoting myogenic differentiation via the mTOR-AKT pathway. Additionally, upregulated iNOS and increased NO- contributed to myoblast proliferation and fiber fusion, thereby facilitating overall myoblast maturation. These findings underscore the potential of MXene NPs loaded within highly aligned matrices as therapeutic agents to promote skeletal muscle tissue recovery.

Metallization of Targeted Protein Assemblies in Cell-Derived Extracellular Matrix by Antibody-Guided Biotemplating

Biological systems are composed of hierarchical structures made of a large number of proteins. These structures are highly sophisticated and challenging to replicate using artificial synthesis methods. To exploit these structures in materials science, biotemplating is used to achieve biocomposites that accurately mimic biological structures and impart functionality of inorganic materials, including electrical conductivity. However, the biological scaffolds used in previous studies are limited to stereotypical and simple morphologies with little synthetic diversity because of a lack of control over their morphologies. This study proposes that the specific protein assemblies within the cell-derived extracellular matrix (ECM), whose morphological features are widely tailorable, can be employed as versatile biotemplates. In a typical procedure, a fibrillar assembly of fibronectin-a constituent protein of the ECM-is metalized through an antibody-guided biotemplating approach. Specifically, the antibody-bearing nanogold is attached to the fibronectin through antibody-antigen interactions, and then metals are grown on the nanogold acting as a seed. The biomimetic structure can be adapted for hydrogen production and sensing after improving its electrical conductivity through thermal sintering or additional metal growth. This study demonstrates that cell-derived ECM can be an attractive option for addressing the diversity limitation of a conventional biotemplate.

Engineering Biomimetic Extracellular Matrix with Silica Nanofibers: From 1D Material to 3D Network

Biomaterials at nanoscale is a fast-expanding research field with which extensive studies have been conducted on understanding the interactions between cells and their surrounding microenvironments as well as intracellular communications. Among many kinds of nanoscale biomaterials, mesoporous fibrous structures are especially attractive as a promising approach to mimic the natural extracellular matrix (ECM) for cell and tissue research. Silica is a well-studied biocompatible, natural inorganic material that can be synthesized as morpho-genetically active scaffolds by various methods. This review compares silica nanofibers (SNFs) to other ECM materials such as hydrogel, polymers, and decellularized natural ECM, summarizes fabrication techniques for SNFs, and discusses different strategies of constructing ECM using SNFs. In addition, the latest progress on SNFs synthesis and biomimetic ECM substrates fabrication is summarized and highlighted. Lastly, we look at the wide use of SNF-based ECM scaffolds in biological applications, including stem cell regulation, tissue engineering, drug release, and environmental applications.

Highly Effective Stroke Therapy Enabled by Genetically Engineered Viral Nanofibers

Stroke results in the formation of a cavity in the infarcted brain tissue. Angiogenesis and neurogenesis are poor in the cavity, preventing brain-tissue regeneration for stroke therapy. To regenerate brain tissue in the cavity, filamentous phages, the human-safe nanofiber-like bacteria-specific viruses, are genetically engineered to display many copies of RGD peptide on the sidewalls. The viral nanofibers, electrostatically coated on biocompatible injectable silk protein microparticles, not only promote adhesion, proliferation, and infiltration of neural stem cells (NSCs), but also induce NSCs to differentiate preferentially into neurons in basal medium within 3 d. After the NSC-loaded microparticles are injected into the stroke cavity of rat models, the phage nanofibers on the microparticles stimulate angiogenesis and neurogenesis in the stroke sites within two weeks for brain regeneration, leading to functional recovery of limb motor control of rats within 12 weeks. The viral nanofibers also brought about the desired outcomes for stroke therapy, such as reducing inflammatory response, decreasing thickness of astrocytes scars, and increasing neuroblasts response in the subventricular zone. As virtually any functional peptide can be displayed on the phage by genetic means, the phage nanofibers hold promise as a unique and effective injectable biomaterial for stroke therapy.

A Green, Simple and Facile Way to Synthesize Silver Nanoparticles Using Soluble Starch. pH Studies and Antimicrobial Applications

Along with the progress of nanoscience and nanotechnology came the means to synthesize nanometric scale materials. While changing their physical and chemical properties, they implicitly changed their application area. The aim of this paper was the synthesis of colloidal silver nanoparticles (Ag-NPs by ultrasonic disruption), using soluble starch as a reducing agent and further as a stabilizing agent for produced Ag-NPs. In this context, an important parameter for Ag-NPs preparation is the pH, which can determine the particle size and stability. The physical-chemical behavior of the synthesized Ag-NPs (shape, size, dispersion, electric charge) is strongly influenced by the pH value (experiment being conducted for pH values in the range between 8 and 13). The presence of a peak located at 412 nm into the UV-VIS spectra demonstrates the presence of silver nano-spheres into the produced material. In UV/VIS spectra, we observed a specific peak for yellow silver nano-spheres located at 412 nm. Samples characterization was performed by scanning electron microscopy, SEM, energy-dispersive X-ray spectroscopy, EDX, Fourier-transform infrared spectroscopy, and FT-IR. For all Ag-NP samples, we determined the zeta and observed that the Ag-NP particles obtained at higher pH and have better stability. Due to the intrinsic therapeutic properties and broad antimicrobial spectrum, silver nanoparticles have opened new horizons and new approaches for the control of different types of infections and wound healing abilities. In this context, the present study also aims to confirm the antimicrobial effect of prepared Ag-NPs against several bacterial strains (indicator and clinically isolated strains). In this way, it was confirmed that the antimicrobial activity of synthesized Ag-NPs was good against Staphylococcus aureus (ATCC 25923 and S. aureus MSSA) and Escherichia coli (ATTC 25922 and clinically isolated strain). Based on this observation, we conclude that the prepared Ag-NPs can represent an alternative or auxiliary material used for controlling important nosocomial pathogens. The fungal reference strain Candida albicans was more sensitive at Ag-NPs actions (zone of inhibition = 20 mm) compared with the clinically isolated strain (zone of inhibition = 10 mm), which emphasizes the greater resistance of fungal strains at antimicrobial agent’s action.

Controllable silicon nanostructures featuring stable fluorescence and intrinsic in vitro and in vivo anti-cancer activity

In this manuscript, we demonstrate that the in situ growth of fluorescent silicon (Si) nanomaterials is stimulated when organosilicane molecules interact with different green teas, producing multifunctional Si nanomaterials with controllable zero- (e.g., nanoparticles), two- (e.g., nanosheets), and three- (e.g., nanospheres) dimensional nanostructures. Such green tea-originated Si nanomaterials (GTSN) exhibit strong fluorescence (quantum yield: ∼19-30%) coupled with ultrahigh photostability, as well as intrinsic anti-cancer activity with high specificity (e.g., the GTSN can accurately kill various cancer cells, rather than normal cells). Taking advantage of these unique merits, we further performed systematic in vitro and in vivo experiments to interrogate the mechanism of the green tea- and GTSN-related cancer prevention. Typically, we found that the GTSN entered the cell nuclei and induced cell apoptosis/death of cancer cells. The prepared GTSN were observed in vivo to accumulate in the tumour tissues after 14-d post-injection, leading to an efficient inhibition of tumour growth. Our results open new avenues for designing novel multifunctional and side-effect-free Si nanomaterials with controllable structures.

Cat-Tail-Like Mesostructured Silica Fibers Decorated with Gold Nanowires: Synthesis, Characterization, and Application as Stretchable Sensors

Gold-nanowires (AuNWs)-coated mesostructured silica fibers that have the appearance of a cat's tail have been successfully designed and synthesized. The silica fibers had a Brunauer-Emmett-Teller (BET) surface area of 347 m²  g^-1 and Barret-Joyner-Halenda (BJH) pore size of 3.8 nm. Negatively charged gold seeds could be anchored onto the surface of mesoporous silica fibers through electrostatic attraction. Further treatment with growth solution (including HAuCl₄ , 4-mercaptobenzoic acid, and ascorbic acid) enabled successful growth of vertically aligned AuNWs with controllable lengths on the silica fiber surfaces. These coaxial mesostructured silica microfibers conjugated with AuNWs exhibit excellent stability and real-time response with high durability (≥2500 cycles) as a sensitive flexible microelectronic material. The fabricated device is able to detect the human pulse (measured at the wrist), as well as small-amplitude finger motion.

Silica formation with nanofiber morphology via helical display of the silaffin R5 peptide on a filamentous bacteriophage

Biological systems often generate unique and useful structures, which can have industrial relevance either as direct components or as an inspiration for biomimetic materials. For fabrication of nanoscale silica structures, we explored the use of the silaffin R5 peptide from Cylindrotheca fusiformis expressed on the surface of the fd bacteriophage. By utilizing the biomineralizing peptide component displayed on the bacteriophage surface, we found that low concentrations (0.09 mg/mL of the R5 bacteriophage, below the concentration range used in other studies) could be used to create silica nanofibers. An additional benefit of this approach is the ability of our R5-displaying phage to form silica materials without the need for supplementary components, such as aminopropyl triethoxysilane, that are typically used in such processes. Because this method for silica formation can occur under mild conditions when implementing our R5 displaying phage system, we may provide a relatively simple, economical, and environmentally friendly process for creating silica nanomaterials.

Drug delivery vectors based on filamentous bacteriophages and phage-mimetic nanoparticles

With the development of nanomedicine, a mass of nanocarriers have been exploited and utilized for targeted drug delivery, including liposomes, polymers, nanoparticles, viruses, and stem cells. Due to huge surface bearing capacity and flexible genetic engineering property, filamentous bacteriophage and phage-mimetic nanoparticles are attracting more and more attentions. As a rod-like bio-nanofiber without tropism to mammalian cells, filamentous phage can be easily loaded with drugs and directly delivered to the lesion location. In particular, chemical drugs can be conjugated on phage surface by chemical modification, and gene drugs can also be inserted into the genome of phage by recombinant DNA technology. Meanwhile, specific peptides/proteins displayed on the phage surface are able to conjugate with nanoparticles which will endow them specific-targeting and huge drug-loading capacity. Additionally, phage peptides/proteins can directly self-assemble into phage-mimetic nanoparticles which may be applied for self-navigating drug delivery nanovehicles. In this review, we summarize the production of phage particles, the identification of targeting peptides, and the recent applications of filamentous bacteriophages as well as their protein/peptide for targeting drug delivery in vitro and in vivo. The improvement of our understanding of filamentous bacteriophage and phage-mimetic nanoparticles will supply new tools for biotechnological approaches.

Hierarchical chirality transfer in the formation of chiral silica fibres with DNA–porphyrin co-templates

Screw-like hierarchical chiral fibres were constructed by the co-assembly of two biomolecules, from a multilevel chirality transfer and amplification process.

Identification of Novel Short BaTiO3-Binding/Nucleating Peptides for Phage-Templated in Situ Synthesis of BaTiO3 Polycrystalline Nanowires at Room Temperature

Ferroelectric materials, such as tetragonal barium titanate (BaTiO3), have been widely used in a variety of areas including bioimaging, biosensing, and high power switching devices. However, conventional methods for the synthesis of tetragonal phase BaTiO3 usually require toxic organic reagents and high temperature treatments, and are thus not environment-friendly and energy-efficient. Here, we took advantage of the phage display technique to develop a novel strategy for the synthesis of BaTiO3 nanowires. We identified a short BaTiO3-binding/nucleating peptide, CRGATPMSC (named RS), from a phage-displayed random peptide library by biopanning technique and then genetically fused the peptide to the major coat protein (pVIII) of filamentous M13 phages to form the pVIII-RS phages. We found that the resultant phages could not only bind with the presynthesized BaTiO3 crystals but also induce the nucleation of uniform tetragonal BaTiO3 nanocrystals at room temperature and without the use of toxic reagents to form one-dimensional polycrystalline BaTiO3 nanowires. This approach enables the green synthesis of BaTiO3 polycrystalline nanowires with potential applications in bioimaging and biosensing fields.

Phage as a Genetically Modifiable Supramacromolecule in Chemistry, Materials and Medicine

Filamentous bacteriophage (phage) is a genetically modifiable supramacromolecule. It can be pictured as a semiflexible nanofiber (∼900 nm long and ∼8 nm wide) made of a DNA core and a protein shell with the former genetically encoding the latter. Although phage bioengineering and phage display techniques were developed before the 1990s, these techniques have not been widely used for chemistry, materials, and biomedical research from the perspective of supramolecular chemistry until recently. Powered by our expertise in displaying a foreign peptide on its surface through engineering phage DNA, we have employed phage to identify target-specific peptides, construct novel organic-inorganic nanohybrids, develop biomaterials for disease treatment, and generate bioanalytical methods for disease diagnosis. Compared with conventional biomimetic chemistry, phage-based supramolecular chemistry represents a new frontier in chemistry, materials science, and medicine. In this Account, we introduce our recent successful efforts in phage-based supramolecular chemistry, by integrating the unique nanofiber-like phage structure and powerful peptide display techniques into the fields of chemistry, materials science, and medicine: (1) successfully synthesized and assembled silica, hydroxyapatite, and gold nanoparticles using phage templates to form novel functional materials; (2) chemically introduced azo units onto the phage to form photoresponsive functional azo-phage nanofibers via a diazotization reaction between aromatic amino groups and the tyrosine residues genetically displayed on phage surfaces; (3) assembled phage into 2D films for studying the effects of both biochemical (the peptide sequences displayed on the phages) and biophysical (the topographies of the phage films) cues on the proliferation and differentiation of mesenchymal stem cells (MSCs) and induced pluripotent stem cells (iPSCs) and identified peptides and topographies that can induce their osteogenic differentiation; (4) discovered that phage could induce angiogenesis and osteogenesis for MSC-based vascularized bone regeneration; (5) identified novel breast cancer cell-targeting and MSC-targeting peptides and used them to significantly improve the efficiency of targeted cancer therapy and MSC-based gene delivery, respectively; (6) employed engineered phage as a probe to achieve ultrasensitive detection of biomarkers from serum of human patients for disease diagnosis; and (7) constructed centimeter-scale 3D multilayered phage assemblies with the potential application as scaffolds for bone regeneration and functional device fabrication. Our findings demonstrated that phage is indeed a very powerful supramacromolecule suitable for not only developing novel nanostructures and biomaterials but also advancing important fields in biomedicine, including molecular targeting, cancer diagnosis and treatment, drug and gene delivery, stem cell fate direction, and tissue regeneration. Our successes in exploiting phage in chemistry, materials, and medicine suggest that phage itself is nontoxic at the cell level and can be safely used for detecting biomarkers in vitro. Moreover, although we have demonstrated successful in vivo tissue regeneration induced by phage, we believe future studies are needed to evaluate the in vivo biodistribution and potential risks of the phage-based biomaterials.

Chemically Modifying Viruses for Diverse Applications

Long fascinating to biologists, viruses offer nanometer-scale benchtops for building molecular-scale devices and materials. Viruses tolerate a wide range of chemical modifications including reaction conditions, pH values, and temperatures. Recent examples of nongenetic manipulation of viral surfaces have extended viruses into applications ranging from biomedical imaging, drug delivery, tissue regeneration, and biosensors to materials for catalysis and energy generation. Chemical reactions on the phage surface include both covalent and noncovalent modifications, including some applied in conjunction with genetic modifications. Here, we survey viruses chemically augmented with capabilities limited only by imagination.

Genetically Engineered Virus Nanofibers as an Efficient Vaccine for Preventing Fungal Infection

Candida albicans (CA) is a kind of fungus that can cause high morbidity and mortality in immunocompromised patients. However, preventing CA infection in these patients is still a daunting challenge. Herein, inspired from the fact that immunization with secreted aspartyl proteinases 2 (Sap2) can prevent the infection, it is proposed to use filamentous phage, a human-safe virus nanofiber specifically infecting bacteria (≈900 nm long and 7 nm wide), to display an epitope peptide of Sap2 (EPS, with a sequence of Val-Lys-Tyr-Thr-Ser) on its side wall and thus serve as a vaccine for preventing CA infection. The engineered virus nanofibers and recombinant Sap2 (rSap2) are then separately used to immunize mice. The humoral and cellular immune responses in the immunized mice are evaluated. Surprisingly, the virus nanofibers significantly induce mice to produce strong immune response as rSap2 and generate antibodies that can bind Sap2 and CA to inhibit the CA infection. Consequently, immunization with the virus nanofibers in mice dramatically increases the survival rate of CA-infected mice. All these results, along with the fact that the virus nanofibers can be mass-produced by infecting bacteria cost-effectively, suggest that virus nanofibers displaying EPS can be a vaccine candidate against fungal infection.

Bottom-Up Synthesis and Sensor Applications of Biomimetic Nanostructures

The combination of nanotechnology, biology, and bioengineering greatly improved the developments of nanomaterials with unique functions and properties. Biomolecules as the nanoscale building blocks play very important roles for the final formation of functional nanostructures. Many kinds of novel nanostructures have been created by using the bioinspired self-assembly and subsequent binding with various nanoparticles. In this review, we summarized the studies on the fabrications and sensor applications of biomimetic nanostructures. The strategies for creating different bottom-up nanostructures by using biomolecules like DNA, protein, peptide, and virus, as well as microorganisms like bacteria and plant leaf are introduced. In addition, the potential applications of the synthesized biomimetic nanostructures for colorimetry, fluorescence, surface plasmon resonance, surface-enhanced Raman scattering, electrical resistance, electrochemistry, and quartz crystal microbalance sensors are presented. This review will promote the understanding of relationships between biomolecules/microorganisms and functional nanomaterials in one way, and in another way it will guide the design and synthesis of biomimetic nanomaterials with unique properties in the future.

Fabrication and characterization of PbSe nanostructures on van der Waals surfaces of GaSe layered semiconductor crystals

The growth morphology, composition and structure of PbSe nanostructures grown on the atomically smooth, clean, nanoporous and oxidized van der Waals (0001) surfaces of GaSe layered crystals were studied by means of atomic force microscopy, x-ray diffractometry,photoelectron spectroscopy and Raman spectroscopy. Semiconductor heterostructures were grown by the hot-wall technique in vacuum. Nanoporous GaSe substrates were fabricated by the thermal annealing of layered crystals in a molecular hydrogen atmosphere. The irradiation of the GaSe(0001) surface by UV radiation was used to fabricate thin Ga(2)O(3) layers with thickness < 2 nm. It was found that the narrow gap semiconductor PbSe shows a tendency to form clusters with a square or rectangular symmetry on the cleanlow-energy (0001) GaSe surface, and (001)-oriented growth of PbSe thin films takes place on this surface. Using this growth technique it is possible to grow PbSe nanostructures with different morphologies:continuous epitaxial layers with thickness < 10 nm on the uncontaminated p-GaSe(0001)surfaces, homogeneous arrays of quantum dots with a high lateral density (more than 1011 cm(−2))on the oxidized van der Waals (0001) surfaces and faceted square pillar-like nanostructures with a low lateral density (∼10(8) cm(−2)) on the nanoporous GaSe substrates. We exploit the ‘vapor–liquid–solid’ growth with low-melting metal (Ga) catalyst of PbSe crystalline branched nanostructures via a surface-defect-assisted mechanism.

Phage-mediated counting by the naked eye of miRNA molecules at attomolar concentrations in a Petri dish

The ability to count biomolecules such as cancer-biomarker miRNAs with the naked eye is seemingly impossible in molecular diagnostics. Here, we show an ultrasensitive naked-eye-counting strategy for quantifying miRNAs by employing T7 phage-a bacteria-specific virus nanoparticle-as a surrogate. The phage is genetically engineered to become fluorescent and capable of binding a miRNA-capturing gold nanoparticle (GNP) in a one-to-one manner. Target miRNAs crosslink the resultant phage-GNP couple and miRNA-capturing magnetic microparticles, forming a sandwich complex containing equimolar phage and miRNA. The phage is then released from the complex and developed into one macroscopic fluorescent plaque in a Petri dish by plating it in a host bacterial medium. Counting the plaques by the naked eye enables the quantification of miRNAs with detection limits of ∼3 and ∼5 aM for single-target and two-target miRNAs, respectively. This approach offers ultrasensitive and convenient quantification of disease biomarkers by the naked eye.

Using the M13 Phage as a Biotemplate to Create Mesoporous Structures Decorated with Gold and Platinum Nanoparticles

By taking advantage of the physical and chemical properties of the M13 bacteriophage, we have used this virus to synthesize mesoporous silica structures. Major coat protein p8 was chemically modified by attaching thiol groups. As we show, the resulting thiolated phage can be used as a biotemplate able to direct the formation of mesoporous silica materials. Simultaneously, this thiol functionality acts as an anchor for binding metal ions, such as Au(3+) and Pt(4+), forming reactive M13-metal ionic complexes which evolve into metal nanoparticles (NPs) trapped in the mesoporous network. Interestingly, Au(3+) ions are reduced to Au(0) NPs by the protein residues without requiring an external reducing agent. Likewise, silica mesostructures decorated with Au and Pt NPs are prepared in a one-pot synthesis and characterized using different techniques. The obtained results allow us to propose a mechanism of formation. In addition, gold-containing mesoporous structures are tested for the reduction of 4-nitrophenol (4-NP) and methylene blue (MB) in the presence of NaBH4. Although all of the gold-containing catalysts exhibit catalytic activity, those obtained with thiolated phages present a better performance than that obtained with M13 alone. This behavior is ascribed to the position of the Au NPs, which are partially embedded in the wall of the final mesostructures.

Bio-inspired synthesis of metal nanomaterials and applications

This critical review focuses on recent advances in the bio-inspired synthesis of metal nanomaterials (MNMs) using microorganisms, viruses, plants, proteins and DNA molecules as well as their applications in various fields. Prospects in the design of bio-inspired MNMs for novel applications are also discussed.

Silica biomineralization via the self-assembly of helical biomolecules

The biomimetic synthesis of relevant silica materials using biological macromolecules as templates via silica biomineralization processes attract rapidly rising attention toward natural and artificial materials. Biomimetic synthesis studies are useful for improving the understanding of the formation mechanism of the hierarchical structures found in living organisms (such as diatoms and sponges) and for promoting significant developments in the biotechnology, nanotechnology and materials chemistry fields. Chirality is a ubiquitous phenomenon in nature and is an inherent feature of biomolecular components in organisms. Helical biomolecules, one of the most important types of chiral macromolecules, can self-assemble into multiple liquid-crystal structures and be used as biotemplates for silica biomineralization, which renders them particularly useful for fabricating complex silica materials under ambient conditions. Over the past two decades, many new silica materials with hierarchical structures and complex morphologies have been created using helical biomolecules. In this review, the developments in this field are described and the recent progress in silica biomineralization templating using several classes of helical biomolecules, including DNA, polypeptides, cellulose and rod-like viruses is summarized. Particular focus is placed on the formation mechanism of biomolecule-silica materials (BSMs) with hierarchical structures. Finally, current research challenges and future developments are discussed in the conclusion.

Preparation of single-handed helical carbonaceous nanotubes using 3-aminophenol-formaldehyde resin

Single-handed helical carbonaceous nanotubes with optical activity were prepared using 3-aminophenol-formaldehyde resin.

Self-Assembly in Biosilicification and Biotemplated Silica Materials

During evolution, living organisms have learned to design biomolecules exhibiting self-assembly properties to build-up materials with complex organizations. This is particularly evidenced by the delicate siliceous structures of diatoms and sponges. These structures have been considered as inspiration sources for the preparation of nanoscale and nanostructured silica-based materials templated by the self-assembled natural or biomimetic molecules. These templates range from short peptides to large viruses, leading to biohybrid objects with a wide variety of dimensions, shapes and organization. A more recent strategy based on the integration of biological self-assembly as the driving force of silica nanoparticles organization offers new perspectives to elaborate highly-tunable, biofunctional nanocomposites.

Phage nanofibers induce vascularized osteogenesis in 3D printed bone scaffolds

A virus-activated matrix is developed to overcome the challenge of forming vascularized bone tissue. It is generated by filling a 3D printed bioceramic scaffold with phage nanofibers displaying high-density RGD peptide. After it is seeded with mesenchymal stem cells (MSCs) and implanted into a bone defect, the phage nanofibers induce osteogenesis and angiogenesis by activating endothelialization and osteogenic differentiation of MSCs.

Stem cells loaded with nanoparticles as a drug carrier for in vivo breast cancer therapy

A novel anti-cancer drug carrier, mesenchymal stem cells (MSCs) encapsulating drug-loaded hollow silica nanoparticles, is used to carry a photosensitizer drug and deliver it to breast tumors, due to the natural high tumor affinity of the MSCs, and inhibit tumor growth by photo dynamic therapy. This new strategy for delivering a photo sensitizer to tumors by using tumor-affinitive MSCs addresses the challenge of the accumulation of photosensitizer drugs in tumors in photodynamic therapy.

Capture and detection of T7 bacteriophages on a nanostructured interface

A highly ordered array of T7 bacteriophages was created by the electrophoretic capture of phages onto a nanostructured array with wells that accommodated the phages. Electrophoresis of bacteriophages was achieved by applying a positive potential on an indium tin oxide electrode at the bottom of the nanowells. Nanoscale arrays of phages with different surface densities were obtained by changing the electric field applied to the bottom of the nanowells. The applied voltage was shown to be the critical factor in generating a well-ordered phage array. The number of wells occupied by a phage, and hence the concentration of phages in a sample solution, could be quantified by using a DNA intercalating dye that rapidly stains the T7 phage. The fluorescence signal was enhanced by the intrinsic photonic effect made available by the geometry of the platform. It was shown that the quantification of phages on the array was 6 orders of magnitude better than could be obtained with a fluorescent plate reader. The device opens up the possibility that phages can be detected directly without enrichment or culturing, and by detecting phages that specifically infect bacteria of interest, rapid pathogen detection becomes possible.

Electrochemically assisted generation of highly ordered azide-functionalized mesoporous silica for oriented hybrid films

One key challenge in inorganic mesoporous films is the development of oriented mesostructures with vertical channels, and even more challenging is their functionalization while maintaining accessible the selected surface groups. Combining the electrochemically assisted deposition of ordered and oriented azide-functionalized mesoporous silica with alkyne-azide click chemistry enables such nanostructured and vertically aligned hybrid films to be obtained with significant amounts of active organic functional groups, as illustrated for ferrocene and pyridine functions. A good level of mesostructural order was obtained, namely up to 40% of organosilane in the starting sol. The method could be applied to a wide variety of functional groups, thus offering numerous new opportunities for applications in various fields.

Tuning nano-architectures and improving bioactivity of conducting polypyrrole coating on bone implants by incorporating bone-borne small molecules

Citric acid, a molecule present in fresh bone, was introduced into template-free electrochemical polymerization to form biocompatible coating made of polypyrrole (PPy) nano-cones on bone implants. It served not only as a dopant to tune the nano-architectures but also as a promoter to enhance bioactivity of the PPy-coated implants.

Phage as a template to grow bone mineral nanocrystals

Phage display is a biotechnique that fuses functional peptides on the outer surface of filamentous phage by inserting DNA encoding the peptides into the genes of its coat proteins. The resultant peptide-displayed phage particles have been widely used as biotemplates for the synthesis of functional hybrid nanomaterials. Here, we describe the bioengineering of M13 filamentous phage to surface-display bone mineral (hydroxyapatite (HAP))-nucleating peptides derived from dentin matrix protein-1 and using the engineered phage as a biotemplate to grow HAP nanocrystals.

Controlled alignment of filamentous supramolecular assemblies of biomolecules into centimeter-scale highly ordered patterns by using nature-inspired magnetic guidance

We took the advantage of the capability of magnetic nanoparticles (MNPs) being aligned along a magnetic field and reproducibly generated large scale bio-nanofiber assemblies with the orientation of the constituent bio-nanofibers defined by the applied magnetic field. When decorated by MNPs, bio-nanofibers could be guided by the external magnetic field to become oriented either horizontally or vertically, forming single- and multi-orientation layered assemblies.

Virus-based photo-responsive nanowires formed by linking site-directed mutagenesis and chemical reaction

Owing to the genetic flexibility and error-free bulk production, bio-nanostructures such as filamentous phage showed great potential in materials synthesis, however, their photo-responsive behaviour is neither explored nor unveiled. Here we show M13 phage genetically engineered with tyrosine residues precisely fused to the major coat protein is converted into a photo-responsive organic nanowire by a site-specific chemical reaction with an aromatic amine to form an azo dye structure on the surface. The resulting azo-M13-phage nanowire exhibits reversible photo-responsive properties due to the photo-switchable cis-trans isomerisation of the azo unit formed on the phage. This result shows that site-specific display of a peptide on bio-nanostructures through site-directed genetic mutagenesis can be translated into site-directed chemical reaction for developing advanced materials. The photo-responsive properties of the azo-M13-phage nanowires may open the door for the development of light controllable smart devices for use in non-linear optics, holography data storage, molecular antenna, and actuators.

Dispersions of monodisperse hybrid rod-like particles by mineralization of filamentous viruses

In this work, we report on the synthesis through a direct chemical approach of hybrid organic/inorganic rod-like particles with a very high aspect ratio (length/diameter) by the use of a biotemplate, the fd virus. A synthetic route is proposed based on an initial step of steric stabilization of the colloidal template by hydrophilic polymer grafting. Thanks to this polymer functionalization, the filamentous viruses are well-dispersed in solution during their mineralization by different inorganic salts, leading to suspensions of individual hybrid rod-like particles such as virus/SiO2 and virus/TiO2. This aqueous solution based approach is shown to be highly reproducible, scalable for large production synthesis, and versatile to different inorganic materials.

Silica-based branched hollow microfibers as a biomimetic extracellular matrix for promoting tumor cell growth in vitro and in vivo

A novel scaffold composed of loosely branched hollow silica microfibers that has been proven to be highly biocompatible is proposed for the 3D culture of cancer cells. The MCF-7 cancer cells can grow and proliferate freely inside the scaffold in the form of multicellular spheroids. MCF-7 cancer cells cultured on the current 3D silica scaffold retained significantly more oncological characters than those cultured on the conventional 2D substrate and can serve as in vitro tumor model for studying cancer treatment.

Virus activated artificial ECM induces the osteoblastic differentiation of mesenchymal stem cells without osteogenic supplements

Biochemical and topographical features of an artificial extracellular matrix (aECM) can direct stem cell fate. However, it is difficult to vary only the biochemical cues without changing nanotopography to study their unique role. We took advantage of two unique features of M13 phage, a non-toxic nanofiber-like virus, to generate a virus-activated aECM with constant ordered ridge/groove nanotopography but displaying different fibronectin-derived peptides (RGD, its synergy site PHSRN, and a combination of RGD and PHSRN). One feature is the self-assembly of phage into a ridge/groove structure, another is the ease of genetically surface-displaying a peptide. We found that the unique ridge/groove nanotopography and the display of RGD and PHSRN could induce the osteoblastic differentiation of mesenchymal stem cells (MSCs) without any osteogenic supplements. The aECM formed through self-assembly and genetic engineering of phage can be used to understand the role of peptide cues in directing stem cell behavior while keeping nanotopography constant.

Bacteriophage bionanowire as a carrier for both cancer-targeting peptides and photosensitizers and its use in selective cancer cell killing by photodynamic therapy

A photosensitizer, pyropheophorbid-a (PPa), is conjugated to SKBR-3 breast cancer cell-specific biological nanowire phage, to form a novel PPa-phage complex, which is further successfully used in selectively killing SKBR-3 breast cancer cells by the mechanism of photodynamic therapy (PDT).

One-pot synthesis of surface roughness controlled hollow silica spheres with enhanced drug loading and release profile under ambient conditions in aqueous solutions

A green one-pot approach is used to synthesize surface morphology controlled hollow silica spheres in aqueous solution under ambient conditions. Using cationic polystyrene particles as a template and aminopropyltriethoxysilane (APTES) as a structural directing agent, the surface roughness and wall thickness could be easily controlled by varying the concentration of tetraethoxysilane (TEOS). Smooth surface of hollow silica spheres with different wall thickness was obtained using anionic polystyrene particles. The resulted hollow silica spheres with rough surface had better performance in carrying and releasing a model drug.