Synergistic Effect on the Photoactivation of the Methane CH Bond over Ga3+-Modified ETS-10

Highly efficient, selective, and stable photocatalytic methane coupling to ethane enabled by lattice oxygen looping

Light-driven oxidative coupling of methane (OCM) for multi-carbon (C2+) product evolution is a promising approach toward the sustainable production of value-added chemicals, yet remains challenging due to its low intrinsic activity. Here, we demonstrate the integration of bismuth oxide (BiOx) and gold (Au) on titanium dioxide (TiO2) substrate to achieve a high conversion rate, product selectivity, and catalytic durability toward photocatalytic OCM through rational catalytic site engineering. Mechanistic investigations reveal that the lattice oxygen in BiOx is effectively activated as the localized oxidant to promote methane dissociation, while Au governs the methyl transfer to avoid undesirable overoxidation and promote carbon─carbon coupling. The optimal Au/BiOx-TiO2 hybrid delivers a conversion rate of 20.8 millimoles per gram per hour with C2+ product selectivity high to 97% in the flow reactor. More specifically, the veritable participation of lattice oxygen during OCM is chemically looped by introduced dioxygen via the Mars-van Krevelen mechanism, endowing superior catalyst stability.

Best Practices for Experiments and Reports in Photocatalytic Methane Conversion

Efficiently converting methane into valuable chemicals via photocatalysis under mild condition represents a sustainable route to energy storage and value-added manufacture. Despite continued interest in this area, the achievements have been overshadowed by the absence of standardized protocols for conducting photocatalytic methane oxidation experiments as well as evaluating the corresponding performance. In this review, we present a structured solution aimed at addressing these challenges. Firstly, we introduce the norms underlying reactor design and outline various configurations in the gas-solid and gas-solid-liquid reaction systems. This discussion helps choosing the suitable reactors for methane conversion experiments. Subsequently, we offer a comprehensive step-by-step protocol applicable to diverse methane-conversion reactions. Emphasizing meticulous verification and accurate quantification of the products, this protocol highlights the significance of mitigating contamination sources and selecting appropriate detection methods. Lastly, we propose the standardized performance metrics crucial for evaluating photocatalytic methane conversion. By defining these metrics, the community could obtain the consensus of assessing the performance across different studies. Moving forward, the future of photocatalytic methane conversion necessitates further refinement of stringent experimental standards and evaluation criteria. Moreover, development of scalable reactor is essential to facilitate the transition from laboratory proof-of-concept to potentially industrial production.

Low-Temperature Oxidation of Methane on Rutile TiO2(110): Identifying the Role of Surface Oxygen Species

Understanding the microkinetic mechanism underlying photocatalytic oxidative methane (CH4) conversion is of significant importance for the successful design of efficient catalysts. Herein, CH4 photooxidation has been systematically investigated on oxidized rutile(R)-TiO2(110) at 60 K. Under 355 nm irradiation, the C-H bond activation of CH4 is accomplished by the hole-trapped dangling OTi- center rather than the hole-trapped Ob- center via the Eley-Rideal reaction pathway, producing movable CH3• radicals. Subsequently, movable CH3• radicals encounter an O/OH species to form CH3O/CH3OH species, which could further dissociate into CH2O under irradiation. However, the majority of the CH3• radical intermediate is ejected into a vacuum, which may induce radical-mediated reactions under ambient conditions. The result not only advances our knowledge about inert C-H bond activation but also provides a deep insight into the mechanism of photocatalytic CH4 conversion, which will be helpful for the successful design of efficient catalysts.

Photocatalytic non-oxidative conversion of methane

The direct conversion of methane to hydrogen and high-value hydrocarbons under mild conditions is an ideal, carbon-neutral method for utilizing natural gas resources. Compared with traditional high-temperature thermal catalytic methods, using clean light energy to activate inert C-H bonds in methane can not only significantly reduce the reaction temperature and avoid catalyst deactivation, but also surpass the limitations of thermodynamic equilibrium and provide new reaction pathways. This paper provides a comprehensive review of developments in the field of photocatalytic non-oxidative conversion of methane (PNOCM), while also highlighting our contributions, particularly focusing on catalyst design, product selectivity, and the underlying photophysical and chemical mechanisms. The challenges and potential solutions are also evaluated. The goal of this feature article is to establish a foundational understanding and stimulate further research in this emerging area.

Photocatalytic Oxidative Coupling of Methane over Au1 Ag Single-Atom Alloy Modified ZnO with Oxygen and Water Vapor: Synergy of Gold and Silver

C-H dissociation and C-C coupling are two key steps in converting CH4 into multi-carbon compounds. Here we report a synergy of Au and Ag to greatly promote C2 H6 formation over Au1 Ag single-atom alloy nanoparticles (Au1 Ag NPs)-modified ZnO catalyst via photocatalytic oxidative coupling of methane (POCM) with O2 and H2 O. Atomically dispersed Au in Au1 Ag NPs effectively promotes the dissociation of O2 and H2 O into *OOH, promoting C-H activation of CH4 on the photogenerated O- to form *CH3 . Electron-deficient Au single atoms, as hopping ladders, also facilitate the migration of electron donor *CH3 from ZnO to Au1 Ag NPs. Finally, *CH3 coupling can readily occur on Ag atoms of Au1 Ag NPs. An excellent C2 H6 yield of 14.0 mmol g-1  h-1 with a selectivity of 79 % and an apparent quantum yield of 14.6 % at 350 nm is obtained via POCM with O2 and H2 O, which is at least two times that of the photocatalytic system. The bimetallic synergistic strategy offers guidance for future catalyst design for POCM with O2 and H2 O.

Photocatalytic Oxidative Coupling of Methane to Ethane Using Water and Oxygen on Ag3PO4-ZnO

Photocatalytic oxidative coupling is an effective way of converting CH4 to high-value-added multi-carbon chemicals under mild conditions, where the breaking of the C-H bond is the main rate-limiting step. In this paper, the Ag3PO4-ZnO heterostructure photocatalyst was synthesized for photocatalytic oxidative coupling of methane (OCM) to C2H6. In addition, an excellent C2H6 yield (16.62 mmol g-1 h-1) and a remarkable apparent quantum yield (15.8% at 350 nm) at 49:1 CH4/Air and 20% RH are obtained, which is more than three times that of the state-of-the-art photocatalytic systems. Ag3PO4 improves the adsorption and dissociation ability of O2 and H2O, benefiting the formation of surface hydroxyl species. As a result, the C-H bond activation energy of CH4 on ZnO was obviously reduced. Meanwhile, the improved separation of photogenerated carriers on the Ag3PO4-ZnO heterostructure also accelerates the OCM process. Moreover, Ag nanoparticles (NPs) derived from Ag3PO4 reduction by photoelectrons promote the coupling of *CH3, which can inhibit the overoxidation of CH4 and increase C2H6 selectivity. This research provides a guide for the design of catalyst and reaction systems in the photocatalytic OCM process.

Cu and Si co-doping on TiO2 nanosheets to modulate reactive oxygen species for efficient photocatalytic methane conversion

In this study, we successfully construct Cu and Si co-doped ultrathin TiO₂ nanosheets. As confirmed by comprehensive characterizations, Cu and Si co-doping can rationally tailor the electronic structure of TiO₂ to maneuver reactive oxygen species for effective photocatalytic methane conversion. In addition, this co-doping greatly enhances the utilization efficiency of photogenerated charges. Furthermore, it is revealed that Cu and Si co-doping can significantly boost the adsorption and activation of methane on TiO₂ nanosheets. As a result, the optimized catalyst achieves a C₂H₆ production rate of 33.8 μmol g^-1 h^-1 with a selectivity of 88.4%. This work provides insights into nanocatalyst design toward efficient photocatalytic methane conversion into value-added compounds.

Simultaneously Accelerating Carrier Transfer and Enhancing O2/CH4 Activation via Tailoring the Oxygen-Vacancy-Rich Surface Layer for Cocatalyst-Free Selective Photocatalytic CH4 Conversion

Solar energy-driven direct CH₄ conversion to liquid oxygenates provides a promising avenue toward green and sustainable CH₄ industry, yet still confronts issues of low selectivity toward single oxygenate and use of noble-metal cocatalysts. Herein, for the first time, we report a defect-engineering strategy that rationally regulates the defective layer over TiO₂ for selective aerobic photocatalytic CH₄ conversion to HCHO without using noble-metal cocatalysts. (Photo)electrochemical and in situ EPR/Raman spectroscopic measurements reveal that an optimized oxygen-vacancy-rich surface disorder layer with a thickness of 1.37 nm can simultaneously promote the separation and migration of photogenerated charge carriers and enhance the activation of O₂ and CH₄, respectively, to •OH and •CH₃ radicals, thereby synergistically boosting HCHO production in aerobic photocatalytic CH₄ conversion. As a result, a HCHO production rate up to 3.16 mmol g^-1 h^-1 with 81.2% selectivity is achieved, outperforming those of the reported state-of-the-art photocatalytic systems. This work sheds light on the mechanism of O₂-participated photocatalytic CH₄ conversion on defective metal oxides and expands the application of defect engineering in designing low-cost and efficient photocatalysts.

MoO3-modified SAPO-34 for photocatalytic nonoxidative coupling of methane

The synergistic effect of the acidity of SAPO-34 and metal-centered sites of MoO3 enhanced the activation of the C–H bond. Regulating the formation of catalytic sites and the acidity of catalysts are critical to improving the activity and stability.

Photocatalysis triggered CVD synthesis of graphene at low temperature

Photocatalysis is employed to dissociate CH4 which facilitates low temperature CVD growth of graphene.

Cooperative Coupling of Oxidative Organic Synthesis and Hydrogen Production over Semiconductor-Based Photocatalysts

Merging hydrogen (H₂) evolution with oxidative organic synthesis in a semiconductor-mediated photoredox reaction is extremely attractive because the clean H₂ fuel and high-value chemicals can be coproduced under mild conditions using light as the sole energy input. Following this dual-functional photocatalytic strategy, a dreamlike reaction pathway for constructing C-C/C-X (X = C, N, O, S) bonds from abundant and readily available X-H bond-containing compounds with concomitant release of H₂ can be readily fulfilled without the need of external chemical reagents, thus offering a green and fascinating organic synthetic strategy. In this review, we begin by presenting a concise overview on the general background of traditional photocatalytic H₂ production and then focus on the fundamental principles of cooperative photoredox coupling of selective organic synthesis and H₂ production by simultaneous utilization of photoexcited electrons and holes over semiconductor-based catalysts to meet the economic and sustainability goal. Thereafter, we put dedicated emphasis on recent key progress of cooperative photoredox coupling of H₂ production and various selective organic transformations, including selective alcohol oxidation, selective methane conversion, amines oxidative coupling, oxidative cross-coupling, cyclic alkanes dehydrogenation, reforming of lignocellulosic biomass, and so on. Finally, the remaining challenges and future perspectives in this flourishing area have been critically discussed. It is anticipated that this review will provide enlightening guidance on the rational design of such dual-functional photoredox reaction system, thereby stimulating the development of economical and environmentally benign solar fuel generation and organic synthesis of value-added fine chemicals.

Photocatalytic Conversion of Methane: Recent Advancements and Prospects

Abundant and affordable methane is not only a high-quality fossil fuel, it is also a raw material for the synthesis of value-added chemicals. Solar-energy-driven conversion of methane offers a promising approach to directly transform methane to valuable energy sources under mild conditions, but remains a great challenge at present. In this Review, recent advances in the photocatalytic conversion of methane are systematically summarized. Insights into the construction of effective semiconductor-based photocatalysts from the perspective of light-absorption units and active centers are highlighted and discussed in detail. The performance of various photocatalysts in the conversion of methane is presented, with the photooxidation classified according to the oxidant systems. Lastly, challenges and future perspectives in the photocatalytic oxidation of methane are described.

Methane Conversion Under Mild Conditions Using Semiconductors and Metal-Semiconductors as Heterogeneous Photocatalysts: State of the Art and Challenges

The processes currently used in the chemical industry for methane conversion into fuels and chemicals operate under extreme conditions like high temperatures and pressures. In this sense, the search for methane conversion under mild conditions remains a great challenge. This review aims to summarize the use semiconductors and metal-semiconductors as heterogeneous photocatalysts for methane conversion under mild conditions into valuable products. First, a brief presentation of photochemical conversion of methane is provided and then the focus of this review on the use of heterogeneous photocatalysts for methane conversion are described. Finally, the main challenges and opportunities are discussed.

Pd-Modified ZnO-Au Enabling Alkoxy Intermediates Formation and Dehydrogenation for Photocatalytic Conversion of Methane to Ethylene

Photocatalysis provides an intriguing approach for the conversion of methane to multicarbon (C₂₊) compounds under mild conditions; however, with methyl radicals as the sole reaction intermediate, the current C₂₊ products are dominated by ethane, with a negligible selectivity toward ethylene, which, as a key chemical feedstock, possesses higher added value than ethane. Herein, we report a direct photocatalytic methane-to-ethylene conversion pathway involving the formation and dehydrogenation of alkoxy (i.e., methoxy and ethoxy) intermediates over a Pd-modified ZnO-Au hybrid catalyst. On the basis of various in situ characterizations, it is revealed that the Pd-induced dehydrogenation capability of the catalyst holds the key to turning on the pathway. During the reaction, methane molecules are first dissociated into methoxy on the surface of ZnO under the assistance of Pd. Then these methoxy intermediates are further dehydrogenated and coupled with methyl radical into ethoxy, which can be subsequently converted into ethylene through dehydrogenation. As a result, the optimized ZnO-AuPd hybrid with atomically dispersed Pd sites in the Au lattice achieves a methane conversion of 536.0 μmol g^-1 with a C₂₊ compound selectivity of 96.0% (39.7% C₂H₄ and 54.9% C₂H₆ in total produced C₂₊ compounds) after 8 h of light irradiation. This work provides fresh insight into the methane conversion pathway under mild conditions and highlights the significance of dehydrogenation for enhanced photocatalytic activity and unsaturated hydrocarbon product selectivity.

Modifications of heterogeneous photocatalysts for hydrocarbon C–H bond activation and selective conversion

This feature article summarizes the recent progress in the modification of heterogeneous photocatalysts for photocatalytic hydrocarbons’ C–H bond activation.

Pressure-induced dehydrogenative coupling of methane to ethane by platinum-loaded gallium oxide photocatalyst

Pt/Ga₂O₃ induced photocatalytic dehydrogenative coupling of CH₄ to yield C₂H₆ under high CH₄ pressure.

Nitrogen Photofixation over III-Nitride Nanowires Assisted by Ruthenium Clusters of Low Atomicity

In many heterogeneous catalysts, the interaction of supported metal species with a matrix can alter the electronic and morphological properties of the metal and manipulate its catalytic properties. III-nitride semiconductors have a unique ability to stabilize ultra-small ruthenium (Ru) clusters (ca. 0.8 nm) at a high loading density up to 5 wt %. n-Type III-nitride nanowires decorated with Ru sub-nanoclusters offer controlled surface charge properties and exhibit superior UV- and visible-light photocatalytic activity for ammonia synthesis at ambient temperature. A metal/semiconductor interfacial Schottky junction with a 0.94 eV barrier height can greatly facilitate photogenerated electron transfer from III-nitrides to Ru, rendering Ru an electron sink that promotes N≡N bond cleavage, and thereby achieving low-temperature ammonia synthesis.

Bifunctional property of Pt nanoparticles deposited on TiO2 for the photocatalytic sp3C–sp3C cross-coupling reactions between THF and alkanes

Photocatalytic direct cross-coupling between THF and alkanes was accelerated by Pt nanoparticles on TiO₂, as a receiver for photoexcited electron and a metal catalyst.

Recent Advances in the Synthesis, Characterization and Application of Zn+-containing Heterogeneous Catalysts

Monovalent Zn+ (3d104s1) systems possess a special electronic structure that can be exploited in heterogeneous catalysis and photocatalysis, though it remains challenge to synthesize Zn+-containing materials. By careful design, Zn+-related species can be synthesized in zeolite and layered double hydroxide systems, which in turn exhibit excellent catalytic potential in methane, CO and CO2 activation. Furthermore, by utilizing advanced characterization tools, including electron spin resonance, X-ray absorption fine structure and density functional theory calculations, the formation mechanism of the Zn+ species and their structure-performance relationships can be understood. Such advanced characterization tools guide the rational design of high-performance Zn+-containing catalysts for efficient energy conversion.

Encapsulating Palladium Nanoparticles Inside Mesoporous MFI Zeolite Nanocrystals for Shape-Selective Catalysis

Pd nanoparticles were successfully encapsulated inside mesoporous silicalite-1 nanocrystals (Pd@mnc-S1) by a one-pot method. The as-synthesized Pd@mnc-S1 with excellent stability functioned as an active and reusable heterogeneous catalyst. The unique porosity and nanostructure of silicalite-1 crystals endowed the Pd@mnc-S1 material general shape-selectivity for various catalytic reactions, including selective hydrogenation, oxidation, and carbon-carbon coupling reactions.

Photocatalytic oxidation of methane over SrCO3 decorated SrTiO3 nanocatalysts via a synergistic effect

Methane oxidation under ambient conditions was realized by a synergistic effect between SrCO₃ and SrTiO₃, in which SrCO₃ acts as a trapping agent to adsorb methane while SrTiO₃ acts as a photocatalyst to activate and oxidize methane under light illumination.

Disruptive catalysis by zeolites

Emerging concepts and novel possibilities in catalysis by zeolites for a new scenario in chemical and energy vector production.

Photo-induced Metal-Catalyst-Free Aromatic Finkelstein Reaction

The facile iodination of aromatic compounds under mild conditions is a great challenge for both organic and medicinal chemistry. Particularly, the synthesis of functionalized aryl iodides by light has long been considered impossible due to their photo-lability, which actually makes aryl iodides popular starting materials in many photo-substitution reactions. Herein, a photo-induced halogen exchange in aryl or vinyl halides has been discovered for the first time. A broad scope of aryl iodides can be prepared in high yields at room temperature under exceptionally mild conditions without any metal or photo-redox catalysts. The presence of a catalytic amount of elemental iodine could promote the reaction significantly.

Photoinduced conversion of methane into benzene over GaN nanowires

As a class of key building blocks in the chemical industry, aromatic compounds are mainly derived from the catalytic reforming of petroleum-based long chain hydrocarbons. The dehydroaromatization of methane can also be achieved by using zeolitic catalysts under relatively high temperature. Herein we demonstrate that Si-doped GaN nanowires (NWs) with a 97% rationally constructed m-plane can directly convert methane into benzene and molecular hydrogen under ultraviolet (UV) illumination at rt. Mechanistic studies suggest that the exposed m-plane of GaN exhibited particularly high activity toward methane C-H bond activation and the quantum efficiency increased linearly as a function of light intensity. The incorporation of a Si-donor or Mg-acceptor dopants into GaN also has a large influence on the photocatalytic performance.

Mechanistic insight into the formation of acetic acid from the direct conversion of methane and carbon dioxide on zinc-modified H-ZSM-5 zeolite

Methane and carbon dioxide are known greenhouse gases, and the conversion of these two C1-building blocks into useful fuels and chemicals is a subject of great importance. By solid-state NMR spectroscopy, we found that methane and carbon dioxide can be co-converted on a zinc-modified H-ZSM-5 zeolite (denoted as Zn/H-ZSM-5) to form acetic acid at a low temperature range of 523-773 K. Solid-state (13)C and (1)H MAS NMR investigation indicates that the unique nature of the bifunctional Zn/H-ZSM-5 catalyst is responsible for this highly selective transformation. The zinc sites efficiently activate CH4 to form zinc methyl species (-Zn-CH3), the Zn-C bond of which is further subject to the CO2 insertion to produce surface acetate species (-Zn-OOCCH3). Moreover, the Brønsted acid sites play an important role for the final formation of acetic acid by the proton transfer to the surface acetate species. The results disclosed herein may offer the new possibility for the efficient activation and selective transformation of methane at low temperatures through the co-conversion strategy. Also, the mechanistic understanding of this process will help to the rational design of robust catalytic systems for the practical conversion of greenhouse gases into useful chemicals.