Redox-Active Ligands in Catalysis

Corrolato(oxo)antimony(V) Dimer with Hydrogen-Bond Donor Groups in Secondary Coordination Sphere as a Catalyst for Hydrogen Evolution Reaction

The focus is on developing alternative molecular catalysts using main-group elements and implementing strategic improvements for sustainable hydrogen production. For this purpose, a FB corrole with a (2-(2-((4-methylphenyl)sulfonamido)ethoxy)phenyl) group inserted into the meso position (C-10) of the corrole, along with its high-valent (corrolato)(oxo)antimony(V) dimer, was synthesized. In the crystal structure analysis of the FB corrole and the (corrolato)(oxo)antimony(V) dimer complex, it was noted that the sulfonamido group in the ligand periphery sits atop the corrole ring. The electrochemical hydrogen evolution reaction (HER) of the (corrolato)(oxo)antimony(V) dimer was studied and compared with a previously reported (corrolato)(oxo)antimony(V) complex, which lacks hydrogen-bond donor groups in the secondary coordination sphere. The newly designed molecules, featuring hydrogen-bond donor groups in the secondary coordination sphere, demonstrated clear superiority in the electrochemical HER. Controlled potential electrolysis was employed to evaluate the charge accumulation associated with hydrogen generation in a homogeneous three-electrode system in the presence of 50 mM TFA. The produced hydrogen exhibits a Faradaic efficiency of approximately 80.96%, a turnover frequency (TOF) of 0.44 h-1, and a production rate of 52.83 μL h-1, highlighting the effective catalytic activity of the (corrolato)(oxo)antimony(V) dimer in hydrogen evolution.

Influence of 1,2,4-Tri-tert-butylcyclopentadienyl Ligand on the Reactivity of the Thorium Bipyridyl Metallocene [η5-1,2,4-(Me3C)3C5H2]2Th(bipy)]

The thorium bipyridyl metallocene (Cp3tBu)2Th(bipy) (1; Cp3tBu = η5-1,2,4-(Me3C)3C5H2) shows a rich reactivity toward a series of small molecules. For example, complex 1 may act as a synthon for the (Cp3tBu)2Th(II) fragment as illustrated by its reactivity toward to CuI, hydrazine derivative (PhNH)2, Ph2E2 (E = S, Se), elemental sulfur (S8) and selenium (Se), organic azides, CS2, and isothiocyanates. Moreover, in the presence of polar multiple bonds, such as those in ketones Ph2CO and (CH2)5CO, aldehydes p-MePhCHO and p-ClPhCHO, seleno-ketone (p-MeOPh)2CSe, nitriles PhCN, Ph2CHCN, C6H11CN, and p-(NC)2Ph, and benzoyl cyanide PhCOCN, C-C coupling occurs to furnish (Cp3tBu)2Th[(bipy)(Ph2CO)] (10), (Cp3tBu)2Th[(bipy)((CH2)5CO)] (11), (Cp3tBu)2Th[(bipy)(p-MePhCHO)] (12), (Cp3tBu)2Th[(bipy)(p-ClPhCHO)] (13), (Cp3tBu)2Th[(bipy){(p-MeOPh)2CSe}] (14), (Cp3tBu)2Th[(bipy)(PhCN)] (16), (Cp3tBu)2Th[(bipy)(Ph2CHCN)] (17), (Cp3tBu)2Th[(bipy)(C6H11CN)] (18), [(Cp3tBu)2Th]2{μ-(bipy)[p-Ph(CN)2](bipy)} (20), and (Cp3tBu)2Th{(bipy)[PhC(CN)O]} (21), respectively. Nevertheless, ketazine (PhCH═N)2 or benzyl nitrile PhCH2CN forms the dimeric complexes [(Cp3tBu)Th]2[μ-NC(Ph)(bipy)]2 (15) and (Cp3tBu)2Th[(bipy){C(═CHPh)NH}] (19), respectively. In contrast, C-N bond cleavage and C-C coupling processes occur upon addition of isonitriles Me3CNC and C6H11NC to 1 to yield the thorium isocyanido amido complexes (Cp3tBu)2Th[4-(Me3C)bipy](NC) (22) and (Cp3tBu)2Th[4-(C6H11)bipy](NC) (23), respectively. Furthermore, a single-electron transfer (SET) process ensues when 1 equiv of CuI is added to 1 to yield the Th(VI) bipyridyl iodide complex (Cp3tBu)2Th(I)(bipy) (3).

Redox-enabled cooperative catalysis by activating secondary alcohols using low-valent Zn complexes

Inspired by nature's redox management in bioinorganic systems, we developed various Zn-complexes to catalyze a radical-mediated borrowing hydrogen process for producing β-disubstituted ketones. A diverse range of secondary alcohols, including fatty alcohols, terpenoids and steroid analogs, were successfully utilized for the chemoselective functionalization of ketones. Several organometallic and control studies suggest that coordinatively unsaturated radical species operate as active catalysts to promote alcohol activation and initiate the HAT process.

Hydrogen atom abstraction as a synthetic route to a square planar CoII complex with a redox-active tetradentate PNNP ligand

Redox-active ligands improve the reactivity of transition metal complexes by facilitating redox processes independent of the transition metal center. A tetradentate square planar (PNCH2CH2NP)CoII (1) complex was synthesized and the ethylene backbone was dehydrogenated through hydrogen atom abstraction to afford (PNCHCHNP)CoII (2), which now contains a redox-active ligand. The ligand backbone of 2 can be readily hydrogenated with H2 to regenerate 1. Reduction of 1 and 2 with KC8 in the presence of 18-crown-6 results in cobalt-based reductions to afford [(PNCH2CH2NP)CoI][K(18-crown-6)] (3) and [(PNCHCHNP)CoI][K(18-crown-6)] (4), respectively. Cyclic voltammetry revealed two reversible oxidation processes for 2, presumed to be ligand-based. Following treatment of 2 with one equivalent of FcPF6, the one-electron oxidation product {[(PNCHCHNP)CoII(THF)][PF6]}·THF (5) was obtained. Treating 5 with an additional equivalent of FcPF6 affords the two-electron oxidation product [(PNCHCHNP)CoII][PF6]2 (6). Addition of PMe3 to 5 produced [(PNCHCHNP)CoII(PMe3)][PF6] (7). A host of characterization methods including nuclear magnetic resonance (NMR) spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, cyclic voltammetry, magnetic susceptibility measurements using SQUID magnetometry, single-crystal X-ray diffraction, and density functional theory calculations were used to assign 5 and 6 as ligand-based oxidation products of 2.

Ni(II) and Pd(II) complexes of a new redox-active pentadentate azo-appended 2-aminophenol ligand: Pd(II)-assisted intraligand cyclization forms a phenoxazinyl ring

Square planar complexes of Ni(II) and Pd(II) of a new redox-active pentadentate azo-appended 2-aminophenol ligand (H4L = N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)-2,2'-diamino-ortho-azobenzene) in three accessible redox levels [amidophenolate(2-), semiquinonate(1-) π radical, and quinone(0)] were synthesized. The coordinated HL(3-) ligand provides four donor sites [two N(iminophenolates), an N'(azo), and an O(phenolate)], while the phenolic OH group remains free in the three complexes. Cyclic voltammetry on complex [Ni(L)] 1 and its corresponding Pd(II) analogue [Pd(L)] 2 in CH2Cl2 displayed three redox responses (two oxidative at E1/2 = 0.06 V and Epa (anodic peak potential) = 0.80 V and one reductive at -0.77 V for 1 and at E1/2 = 0.08 V and Epa = 0.85 V and at -0.74 V for 2vs. Fc+/Fc). The chemical oxidation of 1 with AgSbF6 afforded [Ni(L)]SbF6·2CH2Cl2 (3·2CH2Cl2). Complex [Pd(L*)] 4, which is coordinated by a phenoxazinyl derivative of L(4-), was obtained via intraligand cyclization in the parent complex 2 under basic oxidizing conditions. The molecular structures of 1, 2, 3·2CH2Cl2 and 4 were elucidated through X-ray crystallography at 100 K. Characterization using 1H NMR, X-band EPR, and UV-VIS-NIR spectroscopy established that the complexes have [NiII{(LISQ)˙2-}] 1, [PdII{(LISQ)˙2-}] 2, [NiII{(LIBQ)-}]SbF6/1+SbF6-(3), and [PdII{(L*AP)˙2-}] 4 electronic states. Complexes 1, 2, and 4 possess paramagnetic St (total spin) = 1/2 ground-state, whereas 3 is diamagnetic (St = 0). Density functional theory (DFT) electronic structural calculations at the B3LYP level rationalized the observed experimental results. Time-dependent (TD)-DFT calculations allowed us to identify the nature of the observed absorption spectra.

Proton-assisted seven-electron acceptor properties of di-iso-propylphenyl-bis-iminoacenaphthene

Herein, we report the record-breaking seven-electron reduction of di-iso-propylphenyl-bis-iminoacenaphthene (dpp-bian) involving protons under chemical and electrochemical reduction conditions. Using the dpp-bian-H2 compound as a starting reagent, its mono- and trisodium salts were obtained. A voltammetric study showed that the trinuclear sodium salt can accept an additional seventh electron upon electrochemical reduction.

Fine Tuning between Radical versus Nonradical States of Azoheteroarenes on Selective Osmium Platforms

The article highlights the cooperative impact of azoheteroarenes [abbt: 2,2'-azobis(benzothiazole), L1-L3; bmpd: (E)-1,2-bis(1-methyl-1H-pyrazole-3-yl) diazene, L4] and coligands [bpy: 2,2'-bipyridine; pap: 2-phenylazopyridine] in tuning radical (N-N•-) versus nonradical (N═N0) states of L on selective OsII-platforms in structurally/spectroscopically characterized monomeric [1]ClO4-[6]ClO4 and [1](ClO4)2-[2](ClO4)2/[7](ClO4)2-[8](ClO4)2, respectively. The preferred syn-configuration of L in the complexes prevented obtaining ligand bridged dimeric species. It revealed that {Os(bpy)2} facilitated the stabilization of both nonradical ([1](ClO4)2-[2](ClO4)2) and radical ([1]ClO4-[2]ClO4) states of L1/L2, while it delivered exclusively the radical form for L3 in [3]ClO4. In contrast, {Os(pap)2} generated radical states of L1-L3 in [4]ClO4-[6]ClO4, respectively, without any alteration of the redox state of OsII and azo (N═N0) function of the pap coligand. The neutral state of L4 was, however, ascertained in [7](ClO4)2 or [8](ClO4)2 irrespective of the nature of the metal fragment {Os(bpy)2} or {Os(pap)2}, respectively. Switching between radical and nonradical forms of L in the complexes as a function L and coligand could be addressed based on their relative FMO (frontier molecular orbital) energies. Multiple close redox steps of the complexes extended a competitive electron transfer scenario between the redox active components including metal/L/bpy/pap, leading to delicate electronic forms in each case.

Introducing Novel Redox-Active Bis(phenolate) N-Heterocyclic Carbene Proligands: Investigation of Their Coordination to Fe(II)/Fe(III) and Their Catalytic Activity in Transfer Hydrogenation of Carbonyl Compounds

A simple and efficient procedure for synthesizing novel pincer-type tridentate N-heterocyclic carbene bisphenolate ligands is reported. The synthesis of pincer proligands with N,N'-disubstituted imidazoline core, 5 and 6, was carried out via triethylorthoformate-promoted cyclization of either N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)cyclohexanediamine, 3, or N,N'-bis(2-hydroxyphenyl)cyclohexanediamine, 4, in the presence of concentrated hydrochloric acid. Cyclic voltammograms of the ligands revealed ligand-centered redox activity, indicating the noninnocent nature of the ligands. The voltammograms of the ligands exhibit two successive one-electron oxidations and two consecutive one-electron reductions. In contrast to previous reports, the redox-active ligands in this study exhibit one-electron oxidation and reduction processes. All products were thoroughly characterized by using 1H and 13C NMR spectroscopy. The base-promoted deprotonation of the proligands and subsequent reaction with iron(II) and iron(III) chlorides yielded compounds 7 and 8. These compounds are binuclear and tetranuclear iron(III) complexes that do not contain carbene functional groups. Complexes 7 and 8 were characterized by using elemental analysis and single-crystal X-ray crystallography. At low catalyst loadings, both 7 and 8 exhibited high catalytic activity in the transfer hydrogenation of selected aldehydes and ketones.

Designing one-compartment H2O2 fuel cell using electroactive phenalenyl-based [Fe2(hnmh-PLY)3] complex as the cathode material

The sustainable chemical energy of H2O2 as a fuel and an oxidant in an advantageous single-compartment fuel cell design can be converted into electric energy, which requires molecular engineering to design suitable cathodes for lowering the high overpotential associated with H2O2 reduction. The present work covers the synthesis and structural characterization of a novel cathode material, [FeIII2(hnmh-PLY)3] complex, 1, designed from a PLY-derived Schiff base ligand (E)-9-(2-((2-hydroxynaphthalen-1-yl)methylene)hydrazineyl)-1H-phenalen-1-one, hnmh-PLYH2. Complex 1, when coated on the surface of a glassy carbon electrode (GC-1) significantly catalyzed the reduction of H2O2 in an acidic medium. Therefore, a complex 1 modified glassy carbon electrode was employed in a one-compartment H2O2 fuel cell operated in 0.1 M HCl with Ni foam as the corresponding anode to produce a high open circuit potential (OCP) of 0.65 V and a peak power density (PPD) of 2.84 mW cm-2. CV studies of complex 1 revealed the crucial participation of two Fe(III) centers for initiating H2O2 reduction, and the role of coordinated redox-active PLY units is also highlighted. In the solid state, the π-conjugated network of coordinating (hnmh-PLY) ligands in complex 1 has manifested interesting face-to-face π-π stacking interactions, which have helped the reduction of the complex and facilitated the overall catalytic performance.

Chemical and Redox Noninnocence of Pentane-2,4-dione Bis(S-methylisothiosemicarbazone) in Cobalt Complexes and Their Application in Wacker-Type Oxidation

Cobalt complexes with multiproton- and multielectron-responsive ligands are of interest for challenging catalytic transformations. The chemical and redox noninnocence of pentane-2,4-dione bis(S-methylisothiosemicarbazone) (PBIT) in a series of cobalt complexes has been studied by a range of methods, including spectroscopy [UV-vis, NMR, electron paramagnetic resonance (EPR), X-ray absorption spectroscopy (XAS)], cyclic voltammetry, X-ray diffraction, and density functional theory (DFT) calculations. Two complexes [CoIII(H2LSMe)I]I and [CoIII(LSMe)I2] were found to act as precatalysts in a Wacker-type oxidation of olefins using phenylsilane, the role of which was elucidated through isotopic labeling. Insights into the mechanism of the catalytic transformation as well as the substrate scope of this selective reaction are described, and the essential role of phenylsilane and the noninnocence of PBIT are disclosed. Among the several relevant species characterized was an unprecedented Co(III) complex with a dianionic diradical PBIT ligand ([CoIII(LSMe••)I]).

Metal Complexes of Redox Non-Innocent Ligand N,N'-Bis(3,5-di-tertbutyl-2-hydroxy-phenyl)-1,2-phenylenediamine

Redox non-innocent ligands react with metal precursors to form complexes where the oxidation states of the ligand and thus the metal atom cannot be easily defined. A well-known example of such ligands is bis(o-aminophenol) N,N'-bis(3,5-di-tertbutyl-2-hydroxy-phenyl)-1,2-phenylenediamine, previously developed by the Wieghardt group, which has a potentially tetradentate coordination mode and four distinct protonation states, whereas its electrochemical behavior allows for five distinct oxidation states. This rich redox chemistry, as well as the ability to coordinate to various transition metals, has been utilized in the syntheses of metal complexes with M2L, ML and ML2 stoichiometries, sometimes supported with other ligands. Different oxidation states of the ligand can adopt different coordination modes. For example, in the fully oxidized form, two N donors are sp2-hybridized, which makes the ligand planar, whereas in the fully reduced form, the sp3-hybridized N donors allow the formation of more flexible chelate structures. In general, the metal can be reduced during complexation, but redox processes of the isolated complexes typically occur on the ligand. Combination of this non-innocent ligand with redox-active transition metals may lead to complexes with interesting magnetic, electrochemical, photonic and catalytic properties.

PhenTAA: A Redox-Active N4-Macrocyclic Ligand Featuring Donor and Acceptor Moieties

Here, we present the development and characterization of the novel PhenTAA macrocycle as well as a series of [Ni(R2PhenTAA)]n complexes featuring two sites for ligand-centered redox-activity. These differ in the substituent R (R = H, Me, or Ph) and overall charge of the complex n (n = -2, -1, 0, +1, or +2). Electrochemical and spectroscopic techniques (CV, UV/vis-SEC, X-band EPR) reveal that all redox events of the [Ni(R2PhenTAA)] complexes are ligand-based, with accessible ligand charges of -2, -1, 0, +1, and +2. The o-phenylenediamide (OPD) group functions as the electron donor, while the imine moieties act as electron acceptors. The flanking o-aminobenzaldimine groups delocalize spin density in both the oxidized and reduced ligand states. The reduced complexes have different stabilities depending on the substituent R. For R = H, dimerization occurs upon reduction, whereas for R = Me/Ph, the reduced imine groups are stabilized. This also gives electrochemical access to a [Ni(R2PhenTAA)]2- species. DFT and TD-DFT calculations corroborate these findings and further illustrate the unique donor-acceptor properties of the respective OPD and imine moieties. The novel [Ni(R2PhenTAA)] complexes exhibit up to five different ligand-based oxidation states and are electrochemically stable in a range from -2.4 to +1.8 V for the Me/Ph complexes (vs Fc/Fc+).

Bi- and tridentate coordination behaviour of a novel bis(phosphinimino)methanide ligand

Herein, we report the synthesis of a novel ferrocenyl-functionalized bis(phosphinimino)methane ligand (CH2 (PPh2 NFc)2 ). Deprotonation of CH2 (PPh2 NFc)2 with KN(SiMe3 )2 gave the dimeric species [K{CH(PPh2 NFc)2 }]2 , which was further reacted with ECl2 (E=Ge, Sn) to yield the tetrylene compounds [{CH(PPh2 NFc)2 }ECl]. The ligand and the resulting tetrylenes were examined for their electrochemical properties with the aid of cyclic voltammetry. Furthermore, the reaction of the tetrylenes [{CH(PPh2 NFc)2 }ECl] with [AuC6 F5 (tht)] resulted in the bimetallic complexes [{(AuC6 F5 )CH(PPh2 NFc)2 }ECl] with an unusual Au coordination on the ligand backbone.

Hexaguanidino-Triptycenes and Triphenylenes: Electronic Coupling in Molecules Containing Three Redox-Active o-Diguanidinobenzene Units Connected either Directly or Interacting Through Homoconjugation

Novel redox-active hexaguanidine molecules with multiple redox states were synthesized by connecting three o-diguanidinobenzene units. In 2,3,6,7,14,15-hexaguanidino-triptycenes, the three redox-active o-diguanidinobenzene units are connected through C-C bonds to the sp3 -hybridized bridgehead C atoms, and in 2,3,6,7,10,11-hexaguanidino-triphenylenes they are directly connected. The connectivity difference leads to different electronic coupling between the three redox-active o-diguanidinobenzene units, with homoconjugation being present in the triptycene, but not in the triphenylene compounds. Motivated by the appearance of an intense low-energy electronic transition, we especially analysed the effect of homoconjugation on the electronic structure and charge delocalization in the dicationic redox state of the triptycene derivatives. Then, several trinuclear high-spin cobalt (and copper) complexes were synthesized with the triphenylene and triptycene ligands, and the magnetic coupling and redox properties analysed. By choice of the coligands (hexafluoroacetylacetonate, trifluoroacetylacetonate and acetylacetonate), oxidation could be switched between metal- and ligand-centered redox events, leading to drastic changes in the magnetic or optical properties, especially as a consequence of homoconjugation in the triptycene derivatives.

Redox-active ligands - a viable route to reactive main group metal compounds

Anionic redox-active ligands such as o-amidophenolates, catecholates, dithiolenes, 1,2-benzendithiolates, 2-amidobenzenethiolates, reduced α-diimines, ferrocenyl and porphyrinates are capable of reversible oxidation and thus have the ability to act as sources of electrons for metal centres. These and other non-innocent ligands have been employed in coordination complexes of base transition metals to influence their redox chemistry and afford compounds with useful catalytic, optical, magnetic and conducting properties. Despite the focus in contemporary main group chemistry on designing reactive compounds with potential catalytic activity, comparatively few studies exploring the chemistry of main group metal complexes incorporating redox-active ligands have been reported. This article highlights relevant chemical reactivity and electrochemical studies that probe the oxidation/reduction of main group metal compounds possessing redox-active ligands and comments on the prospects for this relatively untapped avenue of research.

Multielectron Redox Afforded by a Pincer Ligand Promoting Kumada Cross-Coupling Reactions

The redox-active nature of a pincer has been exploited to conduct C-C cross-coupling reactions under mild conditions. A nickel complex with a NNN pincer was dimeric in the solid state, and the structure displayed a Ni2 N2 diamond core. In the dimeric structure, both ligand backbones house an electron, in the iminosemiquinonate form, to keep the metal's oxidation state at +2. In the presence of an aryl Grignard reagent, only 3 mol % loading the nickel complex generates a Kumada cross-coupled product in good yield from a wide variety of aryl-X (X= I, Br, Cl) substrates. That the ligand-based radical remains responsible for promoting such a coupling reaction following a radical pathway is suggested by TEMPO quenching. Furthermore, a radical-clock experiment along with tracing product distribution unambiguously supported the radical's involvement through the catalytic cycle. A series of thorough mechanistic probation, including computational DFT analysis, disclosed the cooperative action of both redox-active pincer ligand and the metal centre to drive the reaction.

Synthesis and Characterization of Photoswitchable Dithienylethene-Based Chiral Bisoxazoline Compounds with Bidirectional Visible-Light Control

In this paper, we have successfully synthesized dithienylethene-based chiral bisoxazoline ligands with bidirectional photoswitching capabilities under visible light irradiation and proposed a strategy for adjusting the conjugation system length in sensitizer groups. The detailed experimental procedures and the characterization data are presented in the main text and the Supporting Information. Despite their moderate photoswitching rates, these ligands provide a promising approach towards developing fully visible light-responsive chiral catalysts.

Sulphur vs NH Group: Effects on the CO2 Electroreduction Capability of Phenylenediamine-Cp Cobalt Complexes

The cobalt complex (I) with cyclopentadienyl and 2-aminothiophenolate ligands was investigated as a homogeneous catalyst for electrochemical CO₂ reduction. By comparing its behavior with an analogous complex with the phenylenediamine (II), the effect of sulfur atom as a substituent has been evaluated. As a result, a positive shift of the reduction potential and the reversibility of the corresponding redox process have been observed, also suggesting a higher stability of the compound with sulfur. Under anhydrous conditions, complex I showed a higher current enhancement in the presence of CO₂ (9.41) in comparison with II (4.12). Moreover, the presence of only one -NH group in I explained the difference in the observed increases on the catalytic activity toward CO₂ due to the presence of water, with current enhancements of 22.73 and 24.40 for I and II, respectively. DFT calculations confirmed the effect of sulfur on the lowering of the energy of the frontier orbitals of I, highlighted by electrochemical measurements. Furthermore, the condensed Fukui function f ^- values agreed very well with the current enhancement observed in the absence of water.

Partner effect in accelerating pincer-co catalyzed nitrile hydroboration reactions

The pincer-Co catalyzed nitrile hydroboration of nitrile has been presented as an elegant strategy to afford amine synthesis; however, ligand engineering is required. We show here a strategy to tune the catalytic behavior of the organometallic catalyst, as an alternative approach to ligand engineering, by means of computational investigations to understand the effect of partners such as (18-crown-6)K⁺, W(CO)₃ and W(PMe₃)₃ on the reactivity of the pincer-Co catalyzed nitrile hydroboration reaction through π-coordination to the ligand aromatic ring. The extra additives bind the central phenyl ring of the ligand by either dispersion or chemical bonding. The electron-richness of the cobalt center is tuned by the partner, and follows the order (18-crown-6)K⁺ > W(PMe₃)₃ > no partner > W(CO)₃. While the influence of the covalent W-containing partners parallels the electron-richness of the W, the non-covalent partner, (18-crown-6)K⁺, surprisingly increases the donor ability of the pincer ligand through the polarization effect. All the elementary steps involved in the nitrile hydroboration reaction are influenced by the partner, and the overall barrier is lowered by a surprisingly large amount of 4.9 kcal mol^-1 in the presence of (18-crown-6)K⁺, suggesting a notable partner effect to be explored by experimentalists so that the reactivity of a catalyst can be tuned without ligand modification.

Mean Value Ensemble Hubbard-U Correction for Spin-Crossover Molecules

High-throughput searches for spin-crossover molecules require Hubbard-U corrections to common density functional exchange-correlation (XC) approximations. However, the U_eff values obtained from linear response or based on previous studies overcorrect the spin-crossover energies. We demonstrate that employing a linearly mixed ensemble average spin state as the reference configuration for the linear response calculation of U_eff resolves this issue. Validation on a commonly used set of spin-crossover complexes shows that these ensemble U_eff values consistently are smaller than those calculated directly on a pure spin state, irrespective of whether that be low- or high-spin. Adiabatic crossover energies using this methodology for a generalized gradient approximation XC functional are closer to the expected target energy range than with conventional U_eff values. Based on the observation that the U_eff correction is similar for different complexes that share transition metals with the same oxidation state, we devise a set of recommended averaged U_eff values for high-throughput calculations.

Metal-Support Interactions in Molecular Single-Site Cluster Catalysts

This study provides atomistic insights into the interface between a single-site catalyst and a transition metal chalcogenide support and reveals that peak catalytic activity occurs when edge/support redox cooperativity is maximized. A molecular platform MCo₆Se₈(PEt₃)₄(L)₂ (1-M, M = Cr, Mn, Fe, Co, Cu, and Zn) was designed in which the active site (M)/support (Co₆Se₈) interactions are interrogated by systematically probing the electronic and structural changes that occur as the identity of the metal varies. All 3d transition metal 1-M clusters display remarkable catalytic activity for coupling tosyl azide and tert-butyl isocyanide, with Mn and Co derivatives showing the fastest turnover in the series. Structural, electronic, and magnetic characterization of the clusters was performed using single crystal X-ray diffraction, ¹H and ³¹P nuclear magnetic resonance spectroscopy, electronic absorption spectroscopy, cyclic voltammetry, and computational methods. Distinct metal/support redox regimes can be accessed in 1-M based on the energy of the edge metal's frontier orbitals with respect to those of the cluster support. As the degree of electronic interaction between the edge and the support increases, a cooperative regime is reached wherein the support can deliver electrons to the catalytic site, increasing the reactivity of key metal-nitrenoid intermediates.

Nickel-Catalyzed Reductive Alkylation of Heteroaryl Imines

The preparation of heterobenzylic amines by a Ni-catalyzed reductive cross-coupling between heteroaryl imines and C(sp3 ) electrophiles is reported. This umpolung-type alkylation proceeds under mild conditions, avoids the pre-generation of organometallic reagents, and exhibits good functional group tolerance. Mechanistic studies are consistent with the imine substrate acting as a redox-active ligand upon coordination to a low-valent Ni center. The resulting bis(2-imino)heterocycle⋅Ni complexes can engage in alkylation reactions with a variety of C(sp3 ) electrophiles, giving heterobenzylic amine products in good yields.

Stepwise reduction of a base-stabilised ferrocenyl aluminium(iii) dihalide for the synthesis of structurally-diverse dialane species

We report the reduction of bulky ferrocenyl-based NHC-stabilised aluminium(iii) diiodide [Fc*(NHC)AlI2] (Fc* = 2,5-bis(3,5-di-tert-butylphenyl)-1-ferrocenyl) in different hydrocarbon solvents (hexane, benzene, toluene, and p-xylene), which results in different outcomes. Reduction in hexane with an equivalent amount of KC8 generates the diiododialane [(Fc*(NHC)AlI)2], whereas complete reduction in hexane leads to an unusual C-H activation at an N-Me group of one NHC unit. In contrast, reaction in aromatic solvents result in hitherto unknown Birch-type reductions of the corresponding solvent molecules by transient aluminium radicals of the type [LAlR2]˙, which is ultimately bound to two aluminium centers.

Azo-oximate metal-carbonyl to metallocarboxylic acid via the intermediate Ir(III) radical congener: quest for co-ligand driven stability of open- and closed-shell complexes

The redox non-innocent behavior of the diaryl-azo-oxime ligand L^NOH1 has been accentuated via the synthesis of metastable anion radical complexes of type trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 (CO is trans to azo group of the ligand) by the oxidative coordination reaction of 1 with Vaska's complex. The stereochemical role of co-ligands vis-à-vis the interplay of π-bonding has been found to be decisive in controlling the aptitude of the coordinated redox non-innocent ligand to accept or reject an electron. This has been clarified via the isolation of quite a few complexes as well as the failure to synthesize some others. The oxidized analogues of type trans-[Ir(L^NO-)Cl(CO)(PPh₃)₂]⁺2+ (CO and azo group of the ligand are trans) as well as its cis isomer cis-[Ir(L^NO-)Cl(CO)(PPh₃)₂]⁺3+ (CO and azo group of the ligand are cis) have been structurally characterized but the radical anion congener of the latter could not be synthesized. Furthermore, the closed shell complexes [Ir(L^NO-)Cl₂(PPh₃)₂] 4 and [Ir(L^NO-)₂Cl(PPh₃)] 5 have been well characterized by diffraction as well as spectral techniques but their corresponding azo anion radical complexes could not be isolated and this is attributed to the trans influence of ancillary ligands. The anion radical complexes trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 may be rapidly transformed to the metallocarboxylic acids trans-[Ir(L^NO-)Cl(CO₂H)(PPh₃)₂] 6via a proton-coupled electron transfer (PCET) process, thereby demonstrating the role of odd electron over the coordinated ligand framework to trigger metal-mediated carbonyl to carboxylic acid functionalization. Complexes 6 are further stabilized via intramolecular -CO₂H⋯ON- (carboxylic acid⋯oximato) H-bonding. The optoelectronic properties as well as the origin of transitions in the complexes were analyzed by TD-DFT and theoretical analysis, which further disclose that the odd electron in trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 is primarily azo-oxime centric with very low contribution from the iridium center.

Heteroligand Metal Complexes with Extended Redox Properties Based on Redox-Active Chelating Ligands of o-Quinone Type and Ferrocene

A combination of different types of redox-active systems in one molecule makes it possible to create coordination compounds with extended redox abilities, combining molecular and electronic structures determined by the features of intra- and intermolecular interactions between such redox-active centres. This review summarizes and analyses information from the literature, published mainly from 2000 to the present, on the methods of preparation, the molecular and electronic structure of mixed-ligand coordination compounds based on redox-active ligands of the o-benzoquinone type and ferrocenes, ferrocene-containing ligands, the features of their redox properties, and some chemical behaviour.

Ni(II) complexes of a new tetradentate NN'N''O picolinoyl-1,2-phenylenediamide-phenolate redox-active ligand at different redox levels

Three square planar nickel(II) complexes of a new asymmetric tetradentate redox-active ligand H₃L² in its deprotonated form, at three redox levels, open-shell semiquinonate(1-) π radical, quinone(0) and closed-shell dianion of its 2-aminophenolate part, have been synthesized. The coordinated ligand provides N (pyridine) and N' and N'' (carboxamide and 1,2-phenylenediamide, respectively) and O (phenolate) donor sites. Cyclic voltammetry on the parent complex [Ni(L²)] 1 in CH₂Cl₂ established a three-membered electron-transfer series (oxidative response at E_1/2 = 0.57 V and reductive response at -0.32 V vs. SCE) consisting of neutral, monocationic and monoanionic [Ni(L²)]^z (z = 0, 1+ and 1-). Oxidation of 1 with AgSbF₆ affords [Ni(L²)](SbF₆) (2) and reduction of 1 with cobaltocene yields [Co(η⁵-C₅H₅)₂][Ni(L²)] (3). The molecular structures of 1·CH₃CN, 2·0.5CH₂Cl₂ and 3·C₆H₆ have been determined by X-ray crystallography at 100 K. Characterization by ¹H NMR, X-band EPR (g_av = 2.006 (solid); 2.008 (CH₂Cl₂-C₆H₅CH₃ glass); 80 K) and UV-VIS-NIR spectral properties established that 1, 2 and 3 have [Ni^II{(L²)˙^2-}], [Ni^II{(L²)^-}]⁺/1⁺ and [Ni^II{(L²)^3-}]^-/1^- electronic states, respectively. Thus, the redox processes are ligand-centred. While 1 possesses paramagnetic S_t (total spin) = 1/2, 2 and 3 possess diamagnetic ground-state S_t = 0. Interestingly, the variable-temperature (2-300 K) magnetic measurement reveals that 1 with the S_t = 1/2 ground state attains the antiferromagnetic S_t = 0 state at a very low temperature, due to weak noncovalent interactions via π-π stacking. Density functional theory (DFT) electronic structural calculations at the B3LYP level of theory rationalized the experimental results. In the UV-VIS-NIR spectra, broad absorptions are recorded for 1 and 2 in the range of 800-1600 nm; however, such an absorption is absent for 3. Time-dependent (TD)-DFT calculations provide a very good fit with the experimental spectra and allow us to identify the observed electronic transitions.

Diruthenium and triruthenium compounds of the potential redox active non-chelated η1-N,η1-N-benzothiadiazole bridge

In the present study, a series of non-chelated BTD (2,1,3-benzothiadiazole)-bridged diruthenium(II) ([{(CH₃CN)(acac)₂Ru^II}₂(μ-BTD)] 1, [{CH₃CN(acac)₂Ru^II}(μ-BTD){Ru^II(acac)₂(η¹-N-BTD)}] 2, [{(η¹-N-BTD)(acac)₂Ru^II}₂(μ-BTD)] 3), and triruthenium ([{(acac)₂Ru^II}₃(μ-BTD)₂(η¹-N-BTD)₂] 4) complexes with varying ratios of η¹-N and μ-bis-η¹-N,η¹-N modes of BTD were studied. Complexes 1-4 (S = 0) were obtained via the one-pot reaction of electron-rich Ru(acac)₂(CH₃CN)₂ and electron-deficient BTD in refluxing acetone. The relatively low Ru(II)/Ru(III) potential of 1-4 (0.08-0.44 V versus SCE) further facilitated the isolation of the corresponding mixed valent Ru^IIRu^III (S = 1/2) and Ru^IIRu^IIRu^III (S = 1/2)/Ru^IIRu^IIIRu^III (S = 1) forms [1]ClO₄-[3]ClO₄ and [4]ClO₄/[4](ClO₄)₂, respectively. The single-crystal X-ray structures of the representative mixed valent [1]ClO₄ and [3]ClO₄ established (i) Ru⋯Ru distances of 6.227 Å and 6.256 Å (molecule A)/6.184 Å (molecule B), respectively, (ii) a significant variation of the N-S distance of BTD in [3]ClO₄ as a function of its binding mode μ versus η¹ and (iii) similar Ru-N (μ-BTD) distances in each case corresponding to a valence delocalised situation. The mixed valent diruthenium (1+-3+) and triruthenium (4+/42+) complexes exhibited metal-based anisotropic electron paramagnetic resonance (EPR) and moderately intense low-energy intervalence charge-transfer (IVCT) transitions in the near-infrared region of 1730-1890 nm. Analysis of the IVCT band using the Hush treatment revealed a valence delocalised class III mixed valent state with the electronic coupling V_ab of ≈2640-2890 cm^-1, as also corroborated by the K_c values of 10⁵-10⁸, solvent independency of the IVCT band and uniform spin distribution between the metal ions in the singly occupied state(s). Furthermore, the involvement of the BTD (η¹ and μ)-based orbitals in the reduction processes was evident by its free radical EPR feature.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Aerobic Oxidation Reactivity of Well-Defined Cobalt(II) and Cobalt(III) Aminophenol Complexes

This paper describes the synthesis and reactivity studies of three cobalt complexes bearing aminophenol-derived ligands without nitrogen substitution: Co^II(^tBu2APH)₂(^tBu2AP)₂ (1), Co^III₂(^tBu2APH)₂(^tBu2AP)₂(μ-^tBu2BAP)₂ (2), and Co^III(^tBu2AP)₃ (3), where ^tBu2APH = 2-amino-4,6-di-tert-butylphenol, ^tBu2AP = 2-amino-4,6-di-tert-butylphenolate, and μ-^tBu2BAP = bridging 2-amido-4,6-di-tert-butylphenolate. Stoichiometric reactivity studies of these well-defined complexes demonstrate the catalytic competency of both cobalt(II) and cobalt(III) complexes in the aerobic oxidative cyclization of ^tBu2APH with tert-butylisonitrile. Reactions with O₂ reveal the aerobic oxidation of the cobalt(II) complex 1 to generate the cobalt(III) species 2 and 3. UV-visible time-course studies and electron paramagnetic resonance spectroscopy indicate that this oxidation proceeds through a ligand-based radical intermediate. These studies represent the first example of well-defined cobalt aminophenol complexes that participate in catalytic aerobic oxidation reactions and highlight a key role for a ligand radical in the oxidation sequence.

Iron(III) Complexes of a Hexadentate Thioether-Appended 2-Aminophenol Ligand: Redox-Driven Spin State Switchover

A green complex [Fe(L³)] (1), supported by the deprotonated form of a hexadentate noninnocent redox-active thioether-appended 2-aminophenolate ligand (H₄L³ = N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)-2,2'-diamino(diphenyldithio)ethane), has been synthesized and structurally characterized at 100(2) K and 298(2) K. In CH₂Cl₂, 1 displays two oxidative and a reductive one-electron redox processes at E_1/2 values of -0.52 and 0.20 V, and -0.85 V versus the Fc⁺/Fc redox couple, respectively. The one-electron oxidized 1⁺ and one-electron reduced 1^- forms, isolated as a blackish-blue solid 1(PF₆)·CH₂Cl₂ (2) and a gray solid [Co(η⁵-C₅H₅)₂]1·DMF (3), have been structurally characterized at 100(2) K. Structural parameters at 100 K of the ligand backbone and metrical oxidation state values unambiguously establish the electronic states as [Fe^III{(L^AP_O,N)^2-}{(L^ISQ_O,N)^•-}{(L_S,S)⁰}] (1) (two tridentate halves are electronically asymmetric-ligand mixed-valency), [Fe^III{(L^ISQ_O,N)^•-}{(L^ISQ_O,N)^•-}{(L_S,S)⁰}]⁺ (1⁺), and [Fe^III{(L^AP_O,N)^2-}{(L^AP_O,N)^2-}{(L_S,S)⁰}]^- (1^-) [dianionic 2-amidophenolate(2-) (L^AP_O,N)^2- and monoanionic 2-iminobenzosemiquinonate(1-) π-radical (S_rad = 1/2) (L^ISQ)^•- redox level]. Mössbauer spectral data of 1 at 295, 200, and 80 K reveal that it has a major low-spin (ls)-Fe(III) and a minor ls-Fe(II) component (redox isomers), and at 7 K, the major component exists exclusively. Thus, in 1, the occurrence of a thermally driven valence-tautomeric (VT) equilibrium (asymmetric) [Fe^III{(L^AP_O,N)^2-}{(L^ISQ_O,N)^•-}{(L_S,S)⁰}] ⇌ (symmetric) [Fe^II{(L^ISQ_O,N)^•-}{(L^ISQ_O,N)^•-}{(L_S,S)⁰}] (80-295 K) is implicated. Mössbauer spectral parameters unequivocally establish that 1⁺ is a ls-Fe(III) complex. In contrast, the monoanion 1^- contains a high-spin (hs)-Fe(III) center (S_Fe = 5/2), as is deduced from its Mössbauer and EPR spectra. Complexes 1-3 possess total spin ground states S_t = 0, 1/2, and 5/2, respectively, based on ¹H NMR and EPR spectra, the variable-temperature (2-300 K) magnetic behavior of 2, and the μ_eff value of 3 at 300 K. Broken-symmetry density functional theory (DFT) calculations at the B3LYP-level of theory reveal that the unpaired electron in 1⁺/2 is due to the (L^ISQ)^•- redox level [ls-Fe(III) (S_Fe = 1/2) is strongly antiferromagnetically coupled to one of the (L^ISQ)^•- radicals (S_rad = 1/2)], and 1^-/3 is a hs-Fe(III) complex, supported by (L³)^4- with two-halves in the (L^AP)^2- redox level. Complex 1 can have either a symmetric or asymmetric electronic state. As per DFT calculation, the former state is stabilized by -3.9 kcal/mol over the latter (DFT usually stabilizes electronically symmetric structure). Time-dependent (TD)-DFT calculations shed light on the origin of observed UV-vis-NIR spectral absorptions for 1-3 and corroborate the results of spectroelectrochemical experiments (300-1100 nm) on 1 (CH₂Cl₂; 298 K). Variable-temperature (218-298 K; CH₂Cl₂) absorption spectral (400-1000 nm) studies on 1 justify the presence of VT equilibrium in the solution-state.

Metal-ligand cooperative approaches in homogeneous catalysis using transition metal complex catalysts of redox noninnocent ligands

Catalysis offers a straightforward route to prepare various value-added molecules starting from readily available raw materials. The catalytic reactions mostly involve multi-electron transformations. Hence, compared to the inexpensive and readily available 3d-metals, the 4d and 5d-transition metals get an extra advantage for performing multi-electron catalytic reactions as the heavier transition metals prefer two-electron redox events. However, for sustainable development, these expensive and scarce heavy metal-based catalysts need to be replaced by inexpensive, environmentally benign, and economically affordable 3d-metal catalysts. In this regard, a metal-ligand cooperative approach involving transition metal complexes of redox noninnocent ligands offers an attractive alternative. The synergistic participation of redox-active ligands during electron transfer events allows multi-electron transformations using 3d-metal catalysts and allows interesting chemical transformations using 4d and 5d-metals as well. Herein we summarize an up-to-date literature report on the metal-ligand cooperative approaches using transition metal complexes of redox noninnocent ligands as catalysts for a few selected types of catalytic reactions.

Where is the unpaired electron density? A combined experimental and theoretical finding on the geometric and electronic structures of the Co(iii) and Mn(iv) complexes of the unsymmetrical non-innocent pincer ONS ligand

The geometry and electronic structures of the Co and Mn complexes of the pincer H3LONS ligand composed of both hard and soft donor atoms at the coordinating sites are reported.

Electronic structure analysis of electrochemical CO2 reduction by iron-porphyrins reveals basic requirements to design catalysts bearing non-innocent ligands

Electrocatalytic CO2 reduction is a possible solution to the increasing CO2 concentration in the earth atmosphere, because it enables storage of energy while using the harmful CO2 feedstock as starting...

An Unusual Mixed Valent Cobalt Dimer as a Catalyst for Anti-Markovnikov Hydrophophination of Alkynes

The reaction of [Co(PMe3)4] (1) with a redox-active NNN pincer ligand (L1) led us to isolate a unique binuclear cobalt complex ([(PMe3)2CoII(L13-)CoI(PMe3)3] (2)) anchored by a three electron reduced L1...

Tuning Ruthenium Carbene Complexes for Selective P-H Activation through Metal-Ligand Cooperation

The use of iminophosphoryl-tethered ruthenium carbene complexes to activate secondary phosphine P-H bonds is reported. Complexes of type [(p-cymene)-RuC(SO2 Ph)(PPh2 NR)] (with R = SiMe3 or 4-C6 H4 -NO2 ) were found to exhibit different reactivities depending on the electronics of the applied phosphine and the substituent at the iminophosphoryl moiety. Hence, the electron-rich silyl-substituted complex undergoes cyclometallation or shift of the imine moiety after cooperative activation of the P-H bond across the M=C linkage, depending on the electronics of the applied phosphine. Deuteration experiments and computational studies proved that cyclometallation is initiated by the activation process at the M=C bond and triggered by the high electron density at the metal in the phosphido intermediates. Consistently, replacement of the trimethylsilyl (TMS) group by the electron-withdrawing 4-nitrophenyl substituent allowed the selective cooperative P-H activation to form stable activation products.

Extensive Redox Non-Innocence in Iron Bipyridine-Diimine Complexes: a Combined Spectroscopic and Computational Study

Metal-ligand cooperation is an important aspect in earth-abundant metal catalysis. Utilizing ligands as electron reservoirs to supplement the redox chemistry of the metal has resulted in many new exciting discoveries. Here, we demonstrate that iron bipyridine-diimine (BDI) complexes exhibit an extensive electron-transfer series that spans a total of five oxidation states, ranging from the trication [Fe(BDI)]3+ to the monoanion [Fe(BDI]-1. Structural characterization by X-ray crystallography revealed the multifaceted redox noninnocence of the BDI ligand, while spectroscopic (e.g., 57Fe Mössbauer and EPR spectroscopy) and computational studies were employed to elucidate the electronic structure of the isolated complexes, which are further discussed in this report.

Radical versus Nonradical States of Azobis(benzothiazole) as a Function of Ancillary Ligands on Selective Ruthenium Platforms

The paper deals with the electronic impact of ancillary ligands on the varying redox features of azobis(benzothiazole) (abbt) in the newly introduced mononuclear ruthenium complexes [Ru(pap)₂(abbt)]ⁿ (1ⁿ) and [Ru(bpy)₂(abbt)]ⁿ (2ⁿ), where pap = 2-phenylazopyridine and bpy = 2,2'-bipyridine. In this regard, the complexes [Ru^II(pap)₂(abbt^•-)]ClO₄ ([1]ClO₄), [Ru^II(pap)₂(abbt⁰)](ClO₄)₂ ([1](ClO₄)₂), [Ru^II(bpy)₂(abbt⁰)](ClO₄)₂ ([2](ClO₄)₂), and [Ru^II(bpy)₂(abbt^•-)]ClO₄ ([2]ClO₄) were structurally and spectroscopically characterized. Unambiguous assignments of the aforestated radical and nonradical forms of abbt in 1⁺/2⁺ and 1²⁺/2²⁺, respectively, were made primarily based on their redox-sensitive azo (N═N) bond distances as well as by their characteristic electron paramagnetic resonance (EPR)/NMR signatures. Although the radical form of abbt^•- was isolated as an exclusive product in the case of strongly π-acidic pap-derived 1⁺, the corresponding moderately π-acidic bpy ancillary ligand primarily delivered an oxidized form of abbt⁰ in 2²⁺, along with the radical form in 2⁺ as a minor (<10%) component. The oxidized abbt⁰-derived [1](ClO₄)₂ was, however, obtained via the chemical oxidation of [1]ClO₄. Both 1⁺ and 2²⁺ displayed multiple closed by reversible redox processes (one oxidation O1 and four successive reductions R1-R4) within the potential window of ±2.0 V versus saturated calomel electrode. The involvement of metal-, ligand-, or metal/ligand-based frontier molecular orbitals along the redox chain was assigned based on the combined experimental (structure, EPR, and spectroelectrochemisry) and theoretical [density functional theory (DFT): molecular orbitals, Mulliken spin densities/time-dependent DFT] investigations. It revealed primarily ligand (abbt/pap or bpy)-based redox activities, keeping the metal ion as a simple spectator. Moreover, frontier molecular orbital analysis corroborated the initial isolation of the radical and nonradical species for the pap-derived 1⁺ and bpy-derived 2²⁺ as well as facile reduction of pap and abbt in 1⁺ and 2⁺, respectively.