Highly branched concave Au/Pd bimetallic nanocrystals with superior electrocatalytic activity and highly efficient SERS enhancement

Highly controlled synthesis of symmetrically branched tripod and pentapod nanocrystals with enhanced photocatalytic performance

Anisotropic nanostructures with tunable optical properties induced by controllable size and symmetry have attracted much attention in many applications. Herein, we report a controlled synthesis of symmetrically branched AuCu alloyed nanocrystals. By varying Au:Cu atom ratio in precursor, Y-shaped tripods with three-fold symmetry and star-shaped pentapods with five-fold symmetry are synthesized, respectively. The growth mechanism of AuCu tripods from icosahedral seeds and AuCu pentapods from decahedral seeds is revealed. Aiming to excellent photocatalytic performance, CdS nanocrystals are controlled grown onto the sharp tips of AuCu tripods and pentapods. In addition, a carrier-selective blocking layer of Ag2S is introduced between AuCu and CdS, for achieving effective charge separation in AuCu-Ag2S-CdS nanohybrids. Through evaluating the photocatalytic performance by hydrogen generation experiments, the AuCu-Ag2S-CdS tripod nanocrystals exhibit an optimized hydrogen evolution rate of 2182 μmol·g-1·h-1. These findings will contribute greatly to the understanding of complex nanoparticle growth mechanism and provide a strategy for the design of anisotropic nanoalloys for widely photocatalytic applications.

Development of a P-tau217 Electrochemiluminescent Immunosensor Reinforced with Au-Cu Nanoparticles for Alzheimer's Disease Precaution

To simply and rapidly detect the highly phosphorylated tau protein at threonine 217 (p-tau217) as a precautionary measure against Alzheimer's disease and distinguish it from other neurodegenerative diseases, a novel immunosensor was prepared using luminol as the electrochemiluminescent (ECL) sensing probe reinforced by Au-Cu nanoparticles (Au-Cu NPs). The Au-Cu alloy NPs were prepared via a co-reduction reaction, exhibiting excellent conductivity and catalytic activity. These properties remarkably enhanced the ECL of luminol, providing a suitable background for the sensing response. After the Au-Cu NPs were decorated on the surface of indium tin oxide glass using 3-amino-propyl trimethoxysilane, the antibody of p-tau217 was immobilized via dominant Au-N bonding to enable the biological specificity of the immunosensor. When p-tau217 specifically interacted with an antibody to form an immune complex on the sensing interface, the ECL signal of the sensor was considerably inhibited by the resulting giant biomolecular complex. This complex prevented luminol diffusion to the electrode surface and electron transfer. The resulting immunosensor showed remarkable sensitivity to p-tau217, with a wide linear detection range from 5 to 600 pg/mL. A detection limit of 0.56 pg/mL was achieved, with recoveries in human serum ranging from 92.3 to 109%. This ECL immunosensor demonstrated high sensitivity and specificity toward p-tau217, along with good reproducibility and stability, providing a new approach for clinical research on Alzheimer's disease.

Noble metal nanodendrites: growth mechanisms, synthesis strategies and applications

Inorganic nanodendrites (NDs) have become a kind of advanced nanomaterials with broad application prospects because of their unique branched architecture. The structural characteristics of nanodendrites include highly branched morphology, abundant tips/edges and high-index crystal planes, and a high atomic utilization rate, which give them great potential for usage in the fields of electrocatalysis, sensing, and therapeutics. Therefore, the rational design and controlled synthesis of inorganic (especially noble metals) nanodendrites have attracted widespread attention nowadays. The development of synthesis strategies and characterization methodology provides unprecedented opportunities for the preparation of abundant nanodendrites with interesting crystallographic structures, morphologies, and application performances. In this review, we systematically summarize the formation mechanisms of noble metal nanodendrites reported in recent years, with a special focus on surfactant-mediated mechanisms. Some typical examples obtained by innovative synthetic methods are then highlighted and recent advances in the application of noble metal nanodendrites are carefully discussed. Finally, we conclude and present the prospects for the future development of nanodendrites. This review helps to deeply understand the synthesis and application of noble metal nanodendrites and may provide some inspiration to develop novel functional nanomaterials (especially electrocatalysts) with enhanced performance.

One-Pot Au@Pd Dendritic Nanoparticles as Electrocatalysts with Ethanol Oxidation Reaction

The one-pot synthesis strategy of Au@Pd dendrites nanoparticles (Au@Pd DNPs) was simply synthesized in a high-temperature aqueous solution condition where cetyltrimethylammonium chloride (CTAC) acted as a reducing and capping agent at a high temperature. The Au@Pd DNPs with highly monodisperse were shown in high yields by the Au:Pd rate. The nanostructure and optical and crystalline properties of the Au@Pd DNPs were characterized by UV–vis spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction. The Au@Pd DNPs showed an efficient electrochemical catalytic performance rate toward the ethanol oxidation reaction (EOR) due to their nanostructures and Au:Pd rate.

Hotspots in action: near-infrared light mediated photoelectrochemical oxygen evolution on high index faceted plasmonic gold nanoarchitectures

Photo-induced electrochemical water splitting is a fascinating approach to overcome the present energy demands as well as environmental issues. To this end, near-infrared (NIR) photocatalysts stand out as promising candidates (where 53% of the solar light is NIR light) to solve the present energy crisis but the lack of NIR-activated photocatalysts has remained a great challenge for decades. Herein, for the first time, we report the synthesis of high-index faceted plasmonic Au nano-branched 12 tip nanostars, which can absorb the whole spectral region of electromagnetic radiation (UV-vis-NIR), for efficient water splitting. Moreover, the plasmonic hot spots on the Au 12 tip nanostars significantly promote the photoelectrochemical oxygen evolution reaction (OER) under NIR light (915 nm) with long-term stability. Remarkably, the Au 12 tip nanostars exhibit 250-fold enhancement of activity under 915 nm laser irradiation and 6.5-fold enhancement of activity under 532 nm laser irradiation, as compared to the Au NPs. Furthermore, the Finite-Difference Time-Domain (FDTD) study confirmed that the significant photoelectrochemical (PEC) enhancement in the NIR light region could be attributed to the hot-electron injection/plasmonic hot spot mechanism upon localized surface plasmonic resonance (LSPR) excitation. Overall, we anticipate that the present work would help to develop new NIR photoelectrocatalysts for meeting future energy demands.

Alloyed Palladium-Lead Nanosheet Assemblies for Electrocatalytic Ethanol Oxidation

Synthesizing alloyed bimetallic electrocatalysts with a three-dimensional (3D) structure assembly have arouse great interests in electrocatalysis. We synthesized a class of alloyed Pd₃Pb/Pd nanosheet assemblies (NSAs) composed of a two-dimensional (2D) sheet structure with adjustable compositions via an oil bath approach at a low temperature. Both the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal the successful formation of the nanosheet structure, where the morphology of Pd₃Pb/Pd NSAs can be regulated by adjusting the atomic mole ratio of Pb and Pb metal precursors. The power X-ray diffraction (XRD) pattern shows that Pd₃Pb/Pd NSA catalysts are homogeneously alloyed. Electrochemical analysis and the density functional theory (DFT) method demonstrate that the electrocatalytic activity of the alloyed Pd₃Pb/Pd NSAs can be improved by the doping of the Pb element. As a result of the addition of element Pb and change of the electron structure, the electrocatalytic activity toward ethanol oxidation of alloyed Pd₃Pb/Pd-15 NSA can reach up to 2886 mA mg^-1, which is approximately 2.8 times that of the pure Pd NSA counterpart (1020 mA mg^-1). The Pd₃Pb/Pd NSAs are favorable in a high catalytic temperature, high KOH concentration, and high ethanol concentration.

Creation and Reconstruction of Thermochromic Au Nanorods with Surface Concavity

Conventional colloidal syntheses typically produce nanostructures with positive curvatures due to thermodynamic preference. Here, we demonstrate the creation of surface concavity in Au nanorods through seed-mediated growth in confined spaces and report their thermochromic responses to temperature changes. The unique surface concavity is created by templating against Fe₃O₄ nanorods, producing a new concavity-sensitive plasmonic band. Due to the high surface energy, the metastable nanorods can be reconstructed at a moderate temperature, enabling convenient and precise tuning of their plasmonic properties by aging in different solvents. Such structural reconstruction of concave Au nanorods enables the fabrication of thermochromic plasmonic films that can display images with vivid color changes or exhibit encrypted, invisible information upon aging. This templating strategy is universal in creating concave nanostructures, which may open the door to designing new nanostructures with promising applications in sensing, anticounterfeiting, information encryption, and displays.

Synthesis of Au–Cu Alloy Nanoparticles as Peroxidase Mimetics for H2O2 and Glucose Colorimetric Detection

The detection of hydrogen peroxide (H2O2) is essential in many research fields, including medical diagnosis, food safety, and environmental monitoring. In this context, Au-based bimetallic alloy nanomaterials have attracted increasing attention as an alternative to enzymes due to their superior catalytic activity. In this study, we report a coreduction synthesis of gold–copper (Au–Cu) alloy nanoparticles in aqueous phase. By controlling the amount of Au and Cu precursors, the Au/Cu molar ratio of the nanoparticles can be tuned from 1/0.1 to 1/2. The synthesized Au–Cu alloy nanoparticles show good peroxidase-like catalytic activity and high selectivity for the H2O2-mediated oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB, colorless) to TMB oxide (blue). The Au–Cu nanoparticles with an Au/Cu molar ratio of 1/2 exhibit high catalytic activity in the H2O2 colorimetric detection, with a limit of detection of 0.141 μM in the linear range of 1–10 μM and a correlation coefficient R2 = 0.991. Furthermore, the Au–Cu alloy nanoparticles can also efficiently detect glucose in the presence of glucose oxidase (GOx), and the detection limit is as low as 0.26 μM.

Growth of Porous Ag@AuCu Trimetal Nanoplates Assisted by Self-Assembly

The self-assembly process of metal nanoparticles has aroused wide attention due to its low cost and simplicity. However, most of the recently reported self-assembly systems only involve two or fewer metals. Herein, we first report a successful synthesis of self-assembled Ag@AuCu trimetal nanoplates in aqueous solution. The building blocks of multibranched AuCu alloy nanocrystals were first synthesized by a chemical reduction method. The growth of Ag onto the AuCu nanocrystals in the presence of hexadecyltrimethylammonium chloride (CTAC) induces a self-assembly process and formation of Ag@AuCu trimetal nanoplates. These nanoplates with an average side length of over 2 μm show a porous morphology and a very clear boundary with the branches of the as-prepared AuCu alloy nanocrystals extending out. The shape and density of the Ag@AuCu trimetal nanoplates can be controlled by changing the reaction time and the concentration of silver nitrate. The as-assembled Ag@AuCu nanoplates are expected to have the potential for wide-ranging applications in surface-enhanced Raman scattering (SERS) and catalysis owing to their unique structures.

Synthesis, Electrocatalytic and Gas Transport Characteristics of Pentagonally Structured Star-Shaped Nanocrystallites of Pd-Ag

The method of synthesis of bimetallic Pd-Ag pentagonally structured catalyst "nanostar" on the surface of Pd-23%Ag alloy films has been developed. The resulting catalyst was studied as a highly active functional layer for methanol oxidation reaction (MOR) in alkaline media and the intensification of hydrogen transport through the Pd-23%Ag membrane in the processes of hydrogen diffusion purification. A modifying layer with a controlled size, composition and excellent electrocatalytic activity was synthesized by electrochemical deposition at a reduced current density compared to classical methods. The low deposition rate affects the formation of pentagonally structured nanocrystallites, allowing Pd and Ag particles to form well-defined structures due to the properties of the surfactant used. Electrochemical studies have demonstrated that the catalyst synthesized by the "nanostar" method shows better electrocatalytic activity in relation to MOR and demonstrates a higher peak current (up to 17.82 µA cm^-2) in comparison with one for the catalyst synthesized by the "nanoparticle" method (up to 10.66 µA cm^-2) in a cyclic voltammetric study. The nanostar catalyst electrode releases the highest current density (0.25 µA cm^-2) for MOR and demonstrates higher catalytic activity for the oxidation of possible intermediates such as sodium formate in MOR. In the processes of diffusion membrane purification of hydrogen, a multiple increase in the density of the penetrating flux of hydrogen through the membranes modified by the "nanostar" catalyst (up to 10.6 mmol s^-1 m^-2) was demonstrated in comparison with the membranes modified by the "nanoparticles" method (up to 4.49 mmol s^-1 m^-2). Research data may indicate that the properties of the developed pentagonally structured catalyst "nanostar" and its enhanced activity with respect to reactions involving hydrogen increase the desorption activity of the membrane, which ultimately accelerates the overall stepwise transfer of hydrogen across the membrane.

Coreduction methodology for immiscible alloys of CuRu solid-solution nanoparticles with high thermal stability and versatile exhaust purification ability

This study provides a coreduction methodology for solid solution formation in immiscible systems, with an example of a whole-region immiscible Cu–Ru system. Although the binary Cu–Ru alloy system is very unstable in the bulk state, the atomic-level well-mixed CuRu solid solution nanoparticles were found to have high thermal stability up to at least 773 K in a vacuum. The exhaust purification activity of the CuRu solid solution was comparable to that of face-centred cubic Ru nanoparticles. According to in situ infrared measurements, stronger NO adsorption and higher intrinsic reactivity of the Ru site on the CuRu surface than that of a pure Ru surface were found, affected by atomic-level Cu substitution. Furthermore, CuRu solid solution was a versatile catalyst for purification of all exhaust gases at a stoichiometric oxygen concentration.

This study provides a coreduction methodology for solid solution formation in immiscible systems, with an example of a whole-region immiscible Cu–Ru system.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.

Improved SERS Performance and Catalytic Activity of Dendritic Au/Ag Bimetallic Nanostructures Based on Ag Dendrites

Bimetallic nanomaterials, which exhibit a combination of the properties associated with two different metals, have enabled innovative applications in nanoscience and nanotechnology. Here, we introduce the fabrication of dendritic Au/Ag bimetallic nanostructures for surface-enhanced Raman scattering (SERS) and catalytic applications. The dendritic Au/Ag bimetallic nanostructures were prepared by combining the electrochemical deposition and replacement reaction. The formation of Au nanoparticle shell on the surface of Ag dendrites greatly improves the stability of dendritic nanostructures, followed by a significant SERS enhancement. In addition, these dendritic Au/Ag bimetallic nanostructures are extremely efficient in degrading 4-nitrophenol (4-NP) compared with the initial dendritic Ag nanostructures. These experimental results indicate the great potential of the dendritic Au/Ag bimetallic nanostructures for the development of excellent SERS substrate and highly efficient catalysts.

Essential Oils and Mono/bi/tri-Metallic Nanocomposites as Alternative Sources of Antimicrobial Agents to Combat Multidrug-Resistant Pathogenic Microorganisms: An Overview

Over the past few decades, many pathogenic bacteria have become resistant to existing antibiotics, which has become a threat to infectious disease control worldwide. Hence, there has been an extensive search for new, efficient, and alternative sources of antimicrobial agents to combat multidrug-resistant pathogenic microorganisms. Numerous studies have reported the potential of both essential oils and metal/metal oxide nanocomposites with broad spectra of bioactivities including antioxidant, anticancer, and antimicrobial attributes. However, only monometallic nanoparticles combined with essential oils have been reported on so far with limited data. Bi- and tri-metallic nanoparticles have attracted immense attention because of their diverse sizes, shapes, high surface-to-volume ratios, activities, physical and chemical stability, and greater degree of selectivity. Combination therapy is currently blooming and represents a potential area that requires greater attention and is worthy of future investigations. This review summarizes the synergistic effects of essential oils with other antimicrobial combinations such as mono-, bi-, and tri-metallic nanocomposites. Thus, the various aspects of this comprehensive review may prove useful in the development of new and alternative therapeutics against antibiotic resistant pathogens in the future.

Engineering State-of-the-Art Plasmonic Nanomaterials for SERS-Based Clinical Liquid Biopsy Applications

Precision oncology, defined as the use of the molecular understanding of cancer to implement personalized patient treatment, is currently at the heart of revolutionizing oncology practice. Due to the need for repeated molecular tumor analyses in facilitating precision oncology, liquid biopsies, which involve the detection of noninvasive cancer biomarkers in circulation, may be a critical key. Yet, existing liquid biopsy analysis technologies are still undergoing an evolution to address the challenges of analyzing trace quantities of circulating tumor biomarkers reliably and cost effectively. Consequently, the recent emergence of cutting-edge plasmonic nanomaterials represents a paradigm shift in harnessing the unique merits of surface-enhanced Raman scattering (SERS) biosensing platforms for clinical liquid biopsy applications. Herein, an expansive review on the design/synthesis of a new generation of diverse plasmonic nanomaterials, and an updated evaluation of their demonstrated SERS-based uses in liquid biopsies, such as circulating tumor cells, tumor-derived extracellular vesicles, as well as circulating cancer proteins, and tumor nucleic acids is presented. Existing challenges impeding the clinical translation of plasmonic nanomaterials for SERS-based liquid biopsy applications are also identified, and outlooks and insights into advancing this rapidly growing field for practical patient use are provided.

Enhancement of Single Molecule Raman Scattering using Sprouted Potato Shaped Bimetallic Nanoparticles

Herein, for the first time, we report the single molecule surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS) spectra with high signal to noise ratio (S/N) using plasmon-active substrates fabricated by sprouted potato shaped Au-Ag bimetallic nanoparticles, prepared using a new one-step synthesis method. This particular shape of the nanoparticles has been obtained by fixing the amount of Au and carefully adjusting the amount of Ag. These nanoparticles have been characterized using scanning electron microscopy, extinction spectroscopy, and glancing angle X-ray diffraction. The single molecule sensitivity of SERS substrates has been tested with two different molecular Raman probes. The origin of the electromagnetic enhancement of single molecule Raman scattering in the presence of sprouted shape nanoparticles has been explained using quasi-static theory as well as finite element method (FEM) simulations. Moreover, the role of (i) methods for binding Raman probe molecules to the substrate, (ii) concentration of molecules, and (iii) Au-Ag ratio on the spectra of molecules has been studied in detail.

Synthesis of Metallic Nanocrystals: From Noble Metals to Base Metals

Metallic nanocrystals exhibit superior properties to their bulk counterparts because of the reduced sizes, diverse morphologies, and controllable exposed crystal facets. Therefore, the fabrication of metal nanocrystals and the adjustment of their properties for different applications have attracted wide attention. One of the typical examples is the fabrication of nanocrystals encased with high-index facets, and research on their magnified catalytic activities and selections. Great accomplishment has been achieved within the field of noble metals such as Pd, Pt, Ag, and Au. However, it remains challenging in the fabrication of base metal nanocrystals such as Ni, Cu, and Co with various structures, shapes, and sizes. In this paper, the synthesis of metal nanocrystals is reviewed. An introduction is briefly given to the metal nanocrystals and the importance of synthesis, and then commonly used synthesis methods for metallic nanocrystals are summarized, followed by specific examples of metal nanocrystals including noble metals, alloys, and base metals. The synthesis of base metal nanocrystals is far from satisfactory compared to the tremendous success achieved in noble metals. Afterwards, we present a discussion on specific synthesis methods suitable for base metals, including seed-mediated growth, ligand control, oriented attachment, chemical etching, and Oswald ripening, based on the comprehensive consideration of thermodynamics, kinetics, and physical restrictions. At the end, conclusions are drawn through the prospect of the future development direction.

Surface versus solution chemistry: manipulating nanoparticle shape and composition through metal-thiolate interactions

Nanostructures with well-defined crystallite sizes, shapes, and compositions are finding use in areas such as energy, security, and even medicine. Seeded growth is a promising strategy to achieve shape-controlled nanostructures, where specific structural features are often directed by the underlying symmetry of the seeds. Here, thiophenol derivatives capable of different metal-thiolate interactions were introduced into the synthesis of Au/Pd nanostructures by seed-mediated co-reduction. Our systematic analysis reveals that the symmetry and composition of the bimetallic nanoparticles (NPs) can be tuned as a function of additive binding strength and concentration, with symmetry reduction observed in some cases. Furthermore, additives with both thiol and amine functionalities facilitate random branching on the octahedral seed. Significantly, this synthetic versatility arises because the thiophenol derivatives modify both the surface capping of the growing nanostructures and the local ligand environment of the metal precursors, highlighting how the dual roles of synthesis components can be exploited to achieve high quality bimetallic nanostructures.

Seed-Mediated Growth of Ag@Au Nanodisks with Improved Chemical Stability and Surface-Enhanced Raman Scattering

Bimetallic Ag@Au nanoparticles (NPs) have received significant research interest because of their unique optical properties and molecular sensing ability through surface-enhanced Raman scattering (SERS). However, the synthesis of Ag@Au core-shell plasmonic nanostructures with precisely controlled size and shape remained a great challenge. Here, we report a simple approach for the synthesis of bimetallic Ag@Au nanodisks of about 13.5 nm thickness and different diameters through a seed-mediated growth process. The synthesis involves the conformal deposition of Au atoms at the corner sites of Ag nanoplate (AgNPL) seeds coupled with site-selective oxidative etching of AgNPL edges to generate Ag@Au nanodisks. The resultant Ag@Au nanodisks manifest significantly improved chemical stability and tunable localized surface plasmon resonance from the visible to the near-infrared spectral range. Moreover, in comparison to AgNPLs, the Ag@Au nanodisks showed greatly enhanced SERS performance with an enhancement factor up to 0.47 × 10⁵, which is nearly 3-fold higher than that of the original AgNPLs (0.18 × 10⁵). Furthermore, the Ag@Au nanodisks show a high sensitivity for detecting probe molecules such as crystal violet of concentration as low as 10^-9 M and excellent reproducibility, with the SERS intensity fluctuation less than 12.5%. The synthesis route adapted for the controlled fabrication of Ag@Au nanodisks can be a potential platform for maneuvering other bimetallic plasmonic nanostructures useful for plasmonics and sensing applications.

Electrochemical synthesis of AuPt nanoflowers in deep eutectic solvent at low temperature and their application in organic electro-oxidation

Deep eutectic solvents (DESs), called a new generation of green solvents, have broad applied in synthesis of nanomaterials due to their remarkable physicochemical properties. In this work, we used a unique strategy (adding moderate water (10%) to DES) to effectively prepare nanomaterials. Flower-like AuPt alloy nanoparticles were successfully synthesized using one-step electrochemical reduction method at a low potential of −0.30 V (vs. Pt) and a low temperature of 30 °C. In this process, the DES acted as solvent and shape-directing agent. More importantly, we used the electrode modified with the as-prepared nanomaterials as the anode to the electrochemical oxidation synthesis. The glassy carbon electrode modified with the AuPt nanoflowers was directly employed to the electro-oxidation of xanthene (XT) to xanthone (XO) under a constant low potential of 0.80 V (vs. Ag/AgCl) and room temperature, with a high yield of XO. Moreover, the synthesis process was milder and more environment-friendly than conventional organic syntheses. This new strategy would have a promising application in electroorganic synthesis fields.

Nanoplasmonic sensors for detecting circulating cancer biomarkers

The detection of cancer biomarkers represents an important aspect of cancer diagnosis and prognosis. Recently, the concept of liquid biopsy has been introduced whereby diagnosis and prognosis are performed by means of analyzing biological fluids obtained from patients to detect and quantify circulating cancer biomarkers. Unlike conventional biopsy whereby primary tumor cells are analyzed, liquid biopsy enables the detection of a wide variety of circulating cancer biomarkers, including microRNA (miRNA), circulating tumor DNA (ctDNA), proteins, exosomes and circulating tumor cells (CTCs). Among the various techniques that have been developed to detect circulating cancer biomarkers, nanoplasmonic sensors represent a promising measurement approach due to high sensitivity and specificity as well as ease of instrumentation and operation. In this review, we discuss the relevance and applicability of three different categories of nanoplasmonic sensing techniques, namely surface plasmon resonance (SPR), localized surface plasmon resonance (LSPR) and surface-enhanced Raman scattering (SERS), for the detection of different classes of circulating cancer biomarkers.

Simple Synthesis of Au-Pd Alloy Nanowire Networks as Macroscopic, Flexible Electrocatalysts with Excellent Performance

The present work introduces a new way to prepare Au-Pd alloy nanowire networks (NWNs) via deposition of Pd atoms onto Au nanowires in reaction media at room temperature without the aid of additional reducing agents. Thanks to their excellent colloidal stability in water as well as in ethanol, the resulting NWNs can be utilized to produce composite thin films with Nafion (perfluorinated sulfonic acid) with dimensions above dozens of square centimeters by means of solution casting on the glass substrate. Most importantly, these films can be easily transferred onto different solid substrates by lift-off technology. Moreover, the resulting Au-Pd alloy NWNs can also be easily and thoroughly loaded into macroscopic carbon fiber cloth (CFC). Both the Au-Pd alloy NWN/Nafion composite film and the Au-Pd alloy NWN-loaded CFC can be used as flexible electrodes for electrocatalysis of ethanol oxidation, with electrocatalytic performance at different distorted states superior by 2 orders of magnitude to those reported in the literature (e.g., commercial Pd/C catalysts and Pd-based nanostructured catalysts). This work opens new possibilities for the large-scale manufacturing of electrodes for fuel cells.

Concave structure of Cu2O truncated microcubes: PVP assisted {100} facet etching and improved facet-dependent photocatalytic properties

Concave structure of Cu₂O truncated microcubes with {100} facets etched with the assistance of air and PVP.

Gemini surfactant with pyrrolidinium head groups and a hydroxyl-substituted spacer: surface properties and assisted one-pot synthesis of dendritic Au nanocrystals

Dendritic Au NCs were facilely prepared by a one-pot method at room temperature with the assistance of gemini surfactant.

l-Arginine-assisted one-pot synthesis of hierarchical Ag1Pt2 nanocorallines for surface-enhanced Raman spectroscopy

The hierarchical multi-branched Ag₁Pt₂ nanocorallines (NCs) were prepared in a large scale by a rapid aqueous method, using l-arginine as the eco-friendly shape-directing agent. The product was mainly characterized by microscopy measurements, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The architectures exhibited superior surface-enhanced Raman scattering (SERS) with 4-nitrothiophenol (4-NTP), the enhancement factor (EF) of 1.3×10⁵, a wide linear range of 10-100μM and a low detection limit of 0.01μM. Meanwhile, the SERS-active substrate was explored for the assay of 4-mercaptobenzoic acid (4-MBA) with significantly enhanced SERS performance. It means Ag₁Pt₂ NCs as a good Raman-active platform for sensing in food and environment analysis, owing to their rough surfaces and unique multi-branched structures.

Morphological effects on the selectivity of intramolecular versus intermolecular catalytic reaction on Au nanoparticles

It is hard for metal nanoparticle catalysts to control the selectivity of a catalytic reaction in a simple process. In this work, we obtain active Au nanoparticle catalysts with high selectivity for the hydrogenation reaction of aromatic nitro compounds, by simply employing spine-like Au nanoparticles. The density functional theory (DFT) calculations further elucidate that the morphological effect on thermal selectivity control is an internal key parameter to modulate the nitro hydrogenation process on the surface of Au spines. These results show that controlled morphological effects may play an important role in catalysis reactions of noble metal NPs with high selectivity.

Serrated Au/Pd Core/Shell Nanowires with Jagged Edges for Boosting Liquid Fuel Electrooxidation

Integration of 1D, core/shell, and jagged features into one entity may provide a promising avenue for further enhancing catalyst performance. However, designing such unique nanostructures is extremely challenging. Herein, 1D serrated Au/Pd core/shell nanowires (CSNWs) with jagged edges were produced simply by a one-pot, dual-capping-agent-assisted method involving co-reduction, galvanic replacement, directional coalescence of preformed nanoparticles, and site-selective epitaxial growth of Pd. Au/PdCSNWs, compared with the commercially available Pd/C, exhibited enhanced electrocatalytic performance towards liquid fuel oxidation because of the synergistic effect of the electronic structure and low-coordinated jagged edges.

Concave gold bipyramids bound with multiple high-index facets: improved Raman and catalytic activities

Concave nanocrystals usually exhibit a large electromagnetic-field enhancement and superior catalytic performance due to their sharp corners, negative curvature and high-index facets. Conventional gold bipyramids (AuBPs) possess intriguing plasmonic properties which are attractive for various applications while the surface curvature of the reported bipyramids has not been fine-tuned to concave or convex structures to date. Additionally, the longitudinal surface plasmon resonance (LSPR) wavelengths of conventional AuBPs are mostly located in the range of 650-1350 nm and the sizes of these nanoparticles are usually not beyond 350 nm, which are not facilitated to some nano-focusing and nanophotonic applications. Herein, we reported a facile and robust approach for fabricating concave AuBPs (CAuBPs) with multiple high-index facets which are distinct from the conventional AuBPs and nanojavelin structures. The length of the as-prepared CAuBPs can even extend up to 800 nm. The CAuBP nanoparticles exhibit a strikingly pronounced broader plasmonic tuning range (even exceeding 1800 nm) and provide much higher electromagnetic-field enhancements in comparison to the conventional AuBPs, which broaden the promising applications of CAuBPs for many single-particle analyses. More importantly, the surface-enhanced Raman scattering (SERS) signals of CAuBPs on the single-particle or aqueous solution both displayed an enhanced intensity compared to conventional AuBPs. The CAuBP nanoparticles also exhibited improved catalytic activity due to the incredible abundance of uncoordinated atoms as active sites.

Laser-induced photochemical synthesis of branched Ag@Au bimetallic nanodendrites as a prominent substrate for surface-enhanced Raman scattering spectroscopy

The project of wielding laser light as a versatile tool for sculpting branched Ag@Au bimetallic nanocrystals with mean size of ~50 nm has been developed in this work. The moderate overgrowth of Ag species with negligible damage effect on the branched Ag@Au nanostructures was achieved by laser-induced photo-oxidation. The final Ag@Au nanodendrites exhibit superior surface enhanced Raman scattering (SERS) activities with an enhancement factor up to ~10¹¹ and a detection limit as low as ~10^-14 M. The pronounced feature should be attributed to the noticeable small-sized branches (<10 nm) and unique pronounced inter-metallic synergies. Our results have a promising potential for developing SERS-based ultrasensitive probes in biomedical application.

Solid-Solution Alloying of Immiscible Ru and Cu with Enhanced CO Oxidation Activity

We report on novel solid-solution alloy nanoparticles (NPs) of Ru and Cu that are completely immiscible even above melting point in bulk phase. Powder X-ray diffraction, scanning transmission electron microscopy, and energy-dispersive X-ray measurements demonstrated that Ru and Cu atoms were homogeneously distributed in the alloy NPs. Ru_0.5Cu_0.5 NPs demonstrated higher CO oxidation activity than fcc-Ru NPs, which are known as one of the best monometallic CO oxidation catalysts.

PdCu alloy nanodendrites with tunable composition as highly active electrocatalysts for methanol oxidation

PdCu alloy nanodendrites were prepared and exhibited enhanced catalytic properties towards methanol oxidation relative to commercial Pd/C.

Multi-shelled ceria hollow spheres with a tunable shell number and thickness and their superior catalytic activity

Multi-shelled ceria hollow spheres with tunable shell number and thickness have been prepared via a coordination polymer precursor method. Besides, this method was extended to the preparation of other rare earth oxides. Au and AuPd loaded ceria hollow spheres composites display superior catalytic activity.