A Visible-Light-Harvesting Assembly with a Sulfocalixarene Linker between Dyes and a Pt-TiO2Photocatalyst

Superparamagnetic Composite Nanobeads Anchored with Molecular Glues for Ultrasensitive Label-free Proteomics

Mass spectrometry has emerged as a mainstream technique for label-free proteomics. However, proteomic coverage for trace samples is constrained by adsorption loss during repeated elution at sample pretreatment. Here, we demonstrated superparamagnetic composite nanoparticles functionalized with molecular glues (MGs) to enrich proteins in trace human biofluid. We showed high protein binding (>95 %) and recovery (≈90 %) rates by anchor-nanoparticles. We further proposed a Streamlined Workflow based on Anchor-nanoparticles for Proteomics (SWAP) method that enabled unbiased protein capture, protein digestion and pure peptides elution in one single tube. We demonstrated SWAP to quantify over 2500 protein groups with 100 HEK 293T cells. We adopted SWAP to profile proteomics with trace aqueous humor samples from cataract (n=15) and wet age-related macular degeneration (n=8) patients, and quantified ≈1400 proteins from 5 μL aqueous humor. SWAP simplifies sample preparation steps, minimizes adsorption loss and improves protein coverage for label-free proteomics with previous trace samples.

Decorating Zn0.5Cd0.5S with C,N Co-Doped CoP: An Efficient Dual-Functional Photocatalyst for H2 Evolution and 2,5-Diformylfuran Oxidation

Photocatalytic H₂ evolution and biomass-derived alcohol oxidation is a cooperative way for improving the utilization of photogenerated charge carriers. Herein, a highly efficient photocatalyst was fabricated by decorating Zn_0.5Cd_0.5S with a C,N codoped CoP polyhedron (referred to as CoP, derived from ZIF-67), and then it was used for H₂ evolution and 5-hydroxymethylfurfural (HMF) oxidation. For the optimized sample (20% CoP/Zn_0.5Cd_0.5S), the generated H₂ rate is significantly enhanced from that of the HMF aqueous solution with 2,5-diformylfuran (DFF) as a concomitant product, about 31.7 times higher than the pristine Zn_0.5Cd_0.5S under visible light irradiation. The separation of photoexcited electrons (e^-) and holes (h⁺) in the process was promoted, as both e^- and h⁺ were involved in the desired conversions. From the results of density functional theory (DFT) calculations and in situ XPS spectra, the utilization of e^- was further improved as a spontaneous transfer from Zn_0.5Cd_0.5S to CoP occurred due to the p-n heterojunction formed between Zn_0.5Cd_0.5S (n type) and CoP (p type). This work provides an efficient method to separate the photoinduced charge carriers and a new way for H₂ evolution accompanied by transformation of HMF to DFF.

MOF-Directed Construction of Cu-Carbon and Cu@N-Doped Carbon as Superior Supports of Metal Nanoparticles toward Efficient Hydrogen Generation

The modulation of electronic behavior of metal-based catalysts is vital to optimize their catalytic performance. Herein, metal-organic frameworks (MOFs) are pyrolyzed to afford a series of different-structured Cu-carbon composites and Cu@N-doped carbon composites. Then a series of CO-resistant catalysts, namely, Co or Ni nanoparticles supported by the Cu-based composites, are synthesized for the hydrogen generation from aqueous NH3BH3. Their catalytic activities are boosted under light irradiation and regulated by the compositions and the fine structures of doped N species with pyridine, pyrrole, and graphitic configurations in the composite supports. Particularly, the optimized Co-based catalyst with the highest graphitic N content exhibits a high activity, achieving a total turnover frequency (TOF) value of 210 min-1, which is higher than all the reported unprecious catalysts. Further investigations verify that the light-driven synergistic electron effect of plasmonic Cu-based composites and Co nanoparticles accounts for the high-performance hydrogen generation.

Interfacial interaction of graphitic carbon nitride/nanodiamond nanocomposites toward synergistic enhancement of photocatalytic degradation of organic contaminants

Graphitic carbon nitride (g-C₃N₄) has been widely used in various photocatalyst applications. However, compared with conventional metal-based photocatalysts, it exhibits low photocatalytic activity because of the low mobility of its charge carriers. In this study, g-C₃N₄/nanodiamond (ND) nanocomposites were fabricated via a facile single-step heating strategy. Under visible-light irradiation, the optimal g-C₃N₄/ND nanocomposites with 1.0 wt% ND content exhibited an RhB degradation rate more than two times greater than that of the g-C₃N₄. In addition, reutilization experiments showed that the g-C₃N₄/ND nanocomposites exhibit good stability and reusability. This remarkable enhancement of the photocatalytic activity was attributed to the interfacial effect between g-C₃N₄ and ND, which reduces energy-wasteful electron-hole recombination and promotes charge-separation efficiency. Such an approach could accelerate the development of composites for photocatalyst applications and provide more rational guidance and fundamental understanding toward realizing the theoretical limits of interfaces.

Ligand-to-metal charge transfer of a pyridine surface complex on TiO2 for selective dehydrogenative cross-coupling with benzene

Dehydrogenative cross-coupling (DCC) between pyridine and benzene proceeded selectively using a TiO2 photocatalyst under visible light irradiation at optimized concentrations of the substrates. Visible light induces ligand-to-metal charge transfer (LMCT) between pyridine and a TiO2 surface to give a pyridine radical cation, which produces a pyridyl radical by its deprotonation or oxidation of another pyridine molecule. The pyridyl radical attacks a benzene ring to form an sp2C-sp2C bond and a hydrogen atom is subsequently removed to complete DCC. Selective excitation of the pyridine LMCT complex in the presence of an excess amount of benzene would be the key for higher selectivity.

Sulfonated calix[4]arene functionalized SiO2@TiO2 for recognition of lysine methylation

Lysine methylations are common protein post-translational modifications (PTMs), that play significant roles in regulating gene activities. Studies of their functions and connections with diseases have important values. However, due to the small variations from their native structures and very low component proportions, it is very difficult to extract methylated peptides from biological mixtures. In this research, a new material that utilizes sulfonated calix[4]arene (SC4A) as the recognition unit and silica coated with TiO₂ as carrier, denoted as SiO₂@TiO₂@SC4A, was synthesized. The equilibrium binding experiments demonstrated that SiO₂@TiO₂@SC4A can identify lysine and arginine methylation and peptides with these methylated residues. The maximum isotherm binding capacities are 70.0, 55.9, 31.4 and 24.8 μmol g^-1 for Lys(Me₃), Lys(Me)₂, Lys(Me) and Lys, respectively. It demonstrated that the higher the degree of methylation, the stronger the interactions. In addition, the analyses of high performance liquid chromatography (HPLC) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF) demonstrated that peptides with methylated lysine or arginine can be selectively extracted from spiked histone trypsin digestion. The recoveries for the spiked GGAK(Me)R, GGAKR(Me)₂ and GGAK(Me)₃R are 83%, 78%, and 84% respectively. The experiments from the nuclear extracts of HeLa cells also illustrated that SiO₂@TiO₂@SC4A holds a potential in the enrichment and identification of lysine methylations.

Remarkable variation of visible light photocatalytic activities of M/Sn0.9Sb0.1O2/TiO2 (M=Au, Ag, Pt) heterostructures depending on the loaded metals

Sn_0.9Sb_0.1O₂/TiO₂ (ATO/TiO₂) heterostructure is a potential visible light photocatalysts that function via an inter-semiconductor hole-transport mechanism. Herein we selectively deposited Au, Ag, or Pt onto the ATO surface of ATO/TiO₂ to investigate charge-trapping behaviors of the noble metals and their effects on photocatalytic performance. We observed that Pt deposition greatly enhanced the photocatalytic activity whereas effects of Au or Ag depositions were not significant. The result of spectroscopic analysis also indicates that Pt is the most effective in scavenging the electrons from the ATO CB. Particularly, Pt/ATO/TiO₂ (ATO:TiO₂ = 15:85 in weight) produced CO₂ of 42 ppmv in 2 h, which is 16 times and 4.8 times that of bare ATO/TiO₂ and nitrogen-doped TiO₂, respectively. Pt deposition on the ATO seems to suppress two independent charge recombination pathways, that is, recombination of electron-hole pairs in ATO and electron transport from the ATO CB to TiO₂ VB.

Photocatalytic H2 Production from Water by Metal-free Dye-sensitized TiO2 Semiconductors: The Role and Development Process of Organic Sensitizers

The utilization of solar energy to produce hydrogen from water is showing increased importance and desirability in the field of artificial photosynthesis to produce clean and sustainable fuels. In a typical three-component dye-sensitized semiconductor system for photocatalysis, the dye sensitizer plays an essential role of energy antenna for harvesting visible light and promoting the reduction reaction to generate hydrogen. In recent decades, a lot of attention has focused on metal-free organic sensitizers, which have the advantages of low cost, high molar extinction coefficient, good modifiability and, most importantly, ability to avoid the use of noble metal ions. This Review enumerates the design strategies, specific properties and photocatalytic performances of metal-free sensitizers in the past 30 years and concludes their evolution process. The advantages of different types of metal-free sensitizers are highlighted and the instructively enlightening experiences are systematic summarized.

The Preparation of Amorphous Aluminum Oxide Modified g-C3N4 to Improve Photocatalytic Performance in Contaminant Degradation Applications

For the first time, aluminum alloy was used as the main source to prepare aluminum oxide-modified carbon nitride with a melamine–cyanuric acid supramolecular complex. The introduction of amorphous aluminum oxide confers macroporosity to the skeletons of g-C3N4-AlOx. Its surface area increased to 75.5 m2g−1, about 1.5 times that of single g-C3N4. After modification, the visible light response range was expanded, especially at 450~500 nm, while the band structure could be adjusted. Compared with g-C3N4, g-C3N4-AlOx has better photocatalytic performance, the adsorption rate for the dye rhodamine B (RhB) is about 2.1 times that of g-C3N4, and the RhB removal rate is 1.2 times that of g-C3N4.

Gas-Phase Photoelectrocatalytic Oxidation of NO via TiO2 Nanorod Array/FTO Photoanodes

Most photoelectrocatalytic (PEC) reactions are performed in the liquid phase for convenient electron transfer in an electrolyte solution. Herein, a novel PEC reactor involving a tandem combination of TiO₂ nanorod array/fluorine-doped tin oxide (TiO₂-NR/FTO) working electrodes and an electrochemical auxiliary cell was constructed to drive the highly efficient PEC oxidation of indoor gas (NO_x). With the aid of a low bias voltage (0.3 V), the as-formed PEC reactor exhibited an 80% removal rate for oxidizing NO (500 ppb) under light irradiation, which is much higher than that of the traditional photocatalytic (PC) process. Upon being irradiated by light, the photogenerated electrons are quickly separated from the holes and transferred to the counter electrode (Pt) owing to the applied bias voltage, leaving photogenerated holes in the TiO₂-NR/FTO electrode for oxidizing NO molecules. Moreover, both dry and humid NO could be effectively removed by the tandem TiO₂-NR/FTO-based gas-phase PEC reactor, indicating that the NO molecules could also be directly oxidized by photogenerated holes in addition to hydroxyl radicals. The presence of trace amounts of water could promote the PEC oxidation of NO owing to the formation of hydroxyl radicals induced by reactions between the water and holes, which could further oxidize NO. This PEC reactor offers an energy-saving, environmentally friendly, and efficient route to treat air polluted with low concentrations of gases (NO_x and SO_x).

KSCN-induced Interfacial Dipole in Black TiO2 for Enhanced Photocatalytic CO2 Reduction

Tuning the electronic band structure of black titania to improve photocatalytic performance through conventional band engineering methods has been challenging because of the defect-induced charge carrier and trapping sites. In this study, KSCN-modified hydrogenated nickel nanocluster-modified black TiO₂ (SCN-H-Ni-TiO₂) exhibits enhanced photocatalytic CO₂ reduction due to the interfacial dipole effect. Upon combining the experimental and theoretical simulation approach, the presence of an electrostatic interfacial dipole associated with chemisorption of SCN has dramatic effects on the photocatalyst band structure in SCN-H-Ni-TiO₂. An interfacial dipole possesses a more negative zeta potential shift of the isoelectric point from 5.20 to 3.20, which will accelerate the charge carrier separation and electron transfer process. Thiocyanate ion passivation on black TiO₂ demonstrated an increased work function around 0.60 eV, which was induced by the interracial dipole effect. Overall, the SCN-H-Ni-TiO₂ photocatalyst showed an enhanced CO₂ reduction to solar fuel yield by 2.80 times higher than H-Ni-TiO₂ and retained around 88% product formation yield after 40 h.

Single-site and nano-confined photocatalysts designed in porous materials for environmental uses and solar fuels

Silica-based micro-, meso-, macro-porous materials offer attractive routes for designing single-site photocatalysts, supporting semiconducting nanoparticles, anchoring light-responsive metal complexes, and encapsulating metal nanoparticles to drive photochemical reactions by taking advantage of their large surface area, controllable pore channels, remarkable transparency to UV/vis and tailorable physicochemical surface characteristics. This review mainly focuses on the fascinating photocatalytic properties of silica-supported Ti catalysts from single-site catalysts to nanoparticles, their surface-chemistry engineering, such as the hydrophobic modification and synthesis of thin films, and the fabrication of nanocatalysts including morphology controlled plasmonic nanostructures with localized surface plasmon resonance. The hybridization of visible-light responsive metal complexes with porous materials for the construction of functional inorganic-organic supramolecular photocatalysts is also included. In addition, the latest progress in the application of MOFs as excellent hosts for designing photocatalytic systems is described.

Point of Anchor: Impacts on Interfacial Charge Transfer of Metal Oxide Nanoparticles

Photoinduced charge transfer across the metal oxide-organic ligand interface plays a key role in the diverse applications of metal oxide nanomaterials/nanostructures, such as photovoltaics, photocatalysis, and optoelectronics. Thus far, most studies are focused on molecular engineering of the organic chromophores, where the charge-transfer properties have been found to dictate the photo absorption efficiency and eventual device performance. Yet, as the chromophores are mostly bound onto the metal oxide surfaces by hydroxyl or carboxyl anchors, the impacts of the bonding interactions at the metal oxide-ligand interface on interfacial charge transfer have remained largely unexplored. Herein, acetylene derivatives are demonstrated as effective surface capping ligands for metal oxide nanoparticles, as exemplified with TiO₂, RuO₂, and ZnO. Experimental studies and first-principles calculations suggest the formation of M-O-C≡C- core-ligand linkages that lead to effective interfacial charge delocalization, in contrast to hopping/tunneling by the conventional M-O-CO- interfacial bonds in the carboxyl-capped counterparts. This leads to the generation of an interfacial state within the oxide bandgap and much enhanced sensitization of the nanoparticle photoluminescence emissions as well as photocatalytic activity, as manifested in the comparative studies with TiO₂ nanoparticles functionalized with ethynylpyrene and pyrenecarboxylic acid. These results highlight the significance of the unique interfacial bonding chemistry by acetylene anchoring group in facilitating efficient charge transfer through the oxide-ligand interfacial linkage and hence the fundamental implication in their practical applications.

A Facile Approach to Prepare Black TiO₂ with Oxygen Vacancy for Enhancing Photocatalytic Activity

Black TiO₂ has triggered worldwide research interest due to its excellent photocatalytic properties. However, the understanding of its structure–property relationships and a more effective, facile and versatile method to produce it remain great challenges. We have developed a facile approach to synthesize black TiO₂ nanoparticles with significantly improved light absorption in the visible and infrared regions. The experimental results show that oxygen vacancies are the major factors responsible for black coloration. More importantly, our black TiO₂ nanoparticles have no Ti³⁺ ions. These oxygen vacancies could introduce localized states in the bandgap and act as trap centers, significantly decreasing the electron–hole recombination. The photocatalytic decomposition of both rhodamine B and methylene blue demonstrated that, under ultraviolet light irradiation, better photocatalytic performance is achieved with our black TiO₂ nanoparticles than with commercial TiO₂ nanoparticles.

Coordination chemistry in the design of heterogeneous photocatalysts

Heterogeneous catalysts have been widely used for photocatalysis, which is a highly important process for energy conversion, owing to their merits such as easy separation of catalysts from the reaction products and applicability to continuous chemical industry and recyclability. Yet, homogenous photocatalysis receives tremendous attention as it can offer a higher activity and selectivity with atomically dispersed catalytic sites and tunable light absorption. For this reason, there is a major trend to combine the advantages of both homogeneous and heterogeneous photocatalysts, in which coordination chemistry plays a role as the bridge. In this article, we aim to provide the first systematic review to give a clear picture of the recent progress from taking advantage of coordination chemistry. We specifically summarize the role of coordination chemistry as a versatile tool to engineer catalytically active sites, tune light harvesting and maneuver charge kinetics in heterogeneous photocatalysis. We then elaborate on the common fundamentals behind various materials systems, together with key spectroscopic characterization techniques and remaining challenges in this field. The typical applications of coordination chemistry in heterogeneous photocatalysis, including proton reduction, water oxidation, carbon dioxide reduction and organic reactions, are highlighted.

Multifunctional surface designed by nanocomposite coating of polytetrafluoroethylene and TiO2 photocatalyst: self-cleaning and superhydrophobicity

Multifunctional surface, having both a superhydrophobic property and a photocatalytic self-cleaning property, was designed through a nanocomposite coating of polytetrafluoroethylene (PTFE) and TiO2 photocatalyst onto a flat quartz glass with a precise structural controlling by applying a radio frequency magnetron sputtering deposition technique. Systematic water contact angle measurements were carried out in relation to the controlling of the surface structure such as size, height and others. Surface wettability gradually changes from Wenzel state to Cassie-Baxter state by controlling of the surface structure, resulting in a well water repellent behavior. Under irradiation of UV light, nanocomposite coating with a desired surface structure and composition realized an adequate photocatalytic self-cleaning property for keeping a clean surface and inducing unique surface wettability changes.

Dye-sensitized photocatalyst for effective water splitting catalyst

Renewable hydrogen production is a sustainable method for the development of next-generation energy technologies. Utilising solar energy and photocatalysts to split water is an ideal method to produce hydrogen. In this review, the fundamental principles and recent progress of hydrogen production by artificial photosynthesis are reviewed, focusing on hydrogen production from photocatalytic water splitting using organic-inorganic composite-based photocatalysts.

The role of metal oxide interactions: revisiting Pt growth on the TiO2 surface in the process of impregnation method

First-principles calculations and experiments with PtO_x on TiO₂ surfaces were performed together to understand the interactions of metal oxides during the calcination process and their influence on the growth pattern of Pt on the TiO₂ surface. Our calculations indicate that PtO_x with a high concentration of oxygen binds more strongly to rutile than to anatase, indicating the formation of stronger interactions between Pt oxide and the rutile surface compared with anatase during the calcination stage under an oxidative atmosphere. X-ray photoelectron spectra quantification analysis illustrates that higher amounts of Pt oxide are obtained when impregnation is performed with a rutile support after calcination in comparison with that of anatase. After reduction, the stronger interaction between PtO_x and rutile leads to a larger amount of partially charged and highly dispersed Pt nanoclusters on the surface, while the weaker interaction between PtO_x and anatase illustrates the dispersion and sintering of higher amounts of metal nanoparticles on the anatase surface. Furthermore, the photocatalytic oxygen evolution test highlights the importance of understanding the interaction between the metal oxide and anatase/rutile for targeted synthesis of the supported catalyst.

Non-Noble Metal Nanoparticles Supported by Postmodified Porous Organic Semiconductors: Highly Efficient Catalysts for Visible-Light-Driven On-Demand H2 Evolution from Ammonia Borane

From the viewpoint of controlling the visible-light-driven activities of catalysts containing metal nanoparticles (NPs) by tuning the microstructures of semiconducting supports, we employed a postsynthetic thermal modification approach to prepare carbon nitride (C₃N₄) species featuring different microstructures and then we synthesized Co and Ni NPs supported by these C₃N₄ species, which were used to catalyze the room-temperature H₂ evolution from ammonia borane (NH₃BH₃). The systematic investigation showed that the catalysts had different activities under light irradiation. Compared with the pristine C₃N₄-based catalyst, all the modified C₃N₄-based catalysts had enhanced activities. The highest active Co catalyst with a total turnover frequency of 93.8 min^-1 was successfully obtained, which exceeded the values of all the reported heterogeneous noble metal-free catalysts. The structure characterizations indicated that the postmodified porous C₃N₄ species had the different band structures, photoluminescence lifetime, and photocurrent density under visible light irradiation, leading to the different separation efficiency of photogenerated charge carriers. These characteristics helped us regulate the electronic characteristics of Co and Ni NPs in the supported catalysts and then led to the significantly different and enhanced activity in the visible-light-driven H₂ evolution.

Photocatalytic activities and photoinduced fusion of gold-modified titania nanoparticle

Gold nanoparticles measuring 3–30 nm deposited on semiconductors result in an effective photocatalyst against several pollutants. Its photocatalytic activities are significant under both UV and solar irradiation. In a photocatalytic system, the oxidation of pollutants takes place on the gold surface as the electron donor, while the electron is consumed by the reduction of oxygen as the electron acceptor on the semiconductor’s surface. This promotes not only increased photocatalytic activities but also the green transformation of pollutant compounds to harmless compounds. The photosensitivity of semiconductors can be modified by tuning the size, shape, and contact of gold nanoparticles. This review highlights the function of gold nanoparticles in overcoming the limitation of transition metal oxide materials in photocatalytic applications.

Controlling Photocatalytic Activity and Size Selectivity of TiO2 Encapsulated in Hollow Silica Spheres by Tuning Silica Shell Structures Using Sacrificial Biomolecules

Yolk-shell nanostructured photocatalyst which consists of inner core photocatalytic particles and outer silica shell exhibits high photocatalytic efficiency and molecular size selectivity due to the molecular sieving property of the outer shell. Creation of extended porosity in the shell endows it with improved adsorption properties and size selectivity toward targeted reactants. In this study, yolk-shell nanostructured photocatalyst consisting of TiO₂ NPs core and porous silica shell with controllable pore size was fabricated through a facile single-step dual-templating approach utilizing oil-in-water (O/W) microemulsions and amphiphilic protein molecules. Addition of optimum amount of protein (ovalbumin) as a sacrificial template together with O/W microemulsion during the synthesis led to the expansion of average pore size from 2.0 to 3.6 nm, while retaining TiO₂-encapsulated yolk-shell nanostructures. Photocatalytic degradation tests using gaseous 2-propanol and huge proteins as model substrates clearly revealed that the obtained material (TiO₂@HSS_pro) showed superior photocatalytic performances with both improved photocatalytic efficiency and molecular size selectivity due to the increased surface area and expanded pore diameter.

Fabrication of Photocatalytic Paper Using TiO2 Nanoparticles Confined in Hollow Silica Capsules

TiO₂ nanoparticles (NPs) encapsulated in hollow silica spheres (TiO₂@HSSs) show a shielding-effect that can insulate photocatalytically active TiO₂ NPs from the surrounding environment and thus prohibit the self-degradation of organic support materials under ultraviolet (UV)-light irradiation. In this study, photocatalytically active papers were fabricated by combining TiO₂@HSS and cellulose fibers, and their photocatalytic activities and durability under UV-light irradiation were examined. The yolk-shell nanostructured TiO₂@HSS, which has an ample void space between inner TiO₂ NPs and an outer silica shell, was synthesized using a facile single-step method utilizing an oil-in-water microemulsion as an organic template. The thus-prepared TiO₂@HSS particles were deposited onto a cellulose paper either by the chemical adhesion process via ionic bonding or by the physical adhesion process using a dual polymer system. The obtained paper containing TiO₂@HSS particles with high air permeability exhibited a higher photocatalytic activity in the photocatalytic decomposition of volatile organic compounds than unsupported powdery TiO₂@HSS particles because of the uniform dispersion on the paper with a reticular fiber network. In addition, the paper was hardly damaged under UV-light irradiation, whereas the paper containing naked TiO₂ NPs showed a marked deterioration with a considerably decreased strength, owing to the ability of the silica shell to prevent direct contact between TiO₂ and organic fibers. This study can offer a promising method to fabricate photocatalytically active papers with a photoresistance property available for real air cleaning.

Broad-Spectrum Tunable Photoluminescent Nanomaterials Constructed from a Modular Light-Harvesting Platform Based on Macrocyclic Amphiphiles

Broad-spectrum tunable photoluminescent nanomaterials are developed based on macrocyclic amphiphiles serving as a novel modular light-harvesting platform with discrete addressability of luminophores in a noncovalent way. By simply varying the donor/acceptor ratio, a broad spectrum of energy transfer outputs is achieved, pointing toward a proof-of-principle application as fluorescent inks for security printing.

Self-induced synthesis of phase-junction TiO2 with a tailored rutile to anatase ratio below phase transition temperature

The surface phase junction of nanocrystalline TiO₂ plays an essential role in governing its photocatalytic activity. Thus, facile and simple methods for preparing phase-junction TiO₂ photocatalysts are highly desired. In this work, we show that phase-junction TiO₂ is directly synthesized from Ti foil by using a simple calcination method with hydrothermal solution as the precursor below the phase transition temperature. Moreover, the ratio of rutile to anatase in the TiO₂ samples could be readily tuned by changing the ratio of weight of Ti foil to HCl, which is used as the hydrothermal precursor, as confirmed by the X-ray diffraction analysis. In the photocatalytic reaction by the TiO₂ nanocomposite, a synergistic effect between the two phases within a certain range of the ratio is clearly observed. The results suggest that an appropriate ratio of anatase to rutile in the TiO₂ nanocomposite can create more efficient solid-solid interfaces upon calcination, thereby facilitating interparticle charge transfer in the photocatalysis.

Nanospherical like reduced graphene oxide decorated TiO2 nanoparticles: an advanced catalyst for the hydrogen evolution reaction

Modification of titanium dioxide (TiO2) for H2 generation is a grand challenge due to its high chemical inertness, large bandgap, narrow light-response range and rapid recombination of electrons and holes. Herein, we report a simple process to prepare nanospherical like reduced graphene oxide (NS-rGO) decorated TiO2 nanoparticles (NS-rGO/TiO2) as photocatalysts. This modified TiO2 sample exhibits remarkably significant improvement on visible light absorption, narrow band gap and efficient charge collection and separation. The photocatalytic H2 production rate of NS-rGO/TiO2 is high as 13996 μmol g(-1) h(-1), which exceeds that obtained on TiO2 alone and TiO2 with parallel graphene sheets by 3.45 and 3.05 times, respectively. This improvement is due to the presence of NS-rGO as an electron collector and transporter. The geometry of NS-rGO should be effective in the design of a graphene/TiO2 composite for photocatalytic applications.

Near-infrared light triggered superior photocatalytic activity from MoS2–NaYF4:Yb3+/Er3+ nanocomposites

A near infrared (NIR) responsive photocatalyst, composed of a narrow band gap semiconductor (i.e. MoS₂) and an optical material possessing upconverting ability (i.e. NaYF₄:Yb³⁺/Er³⁺) has been successfully prepared via a simple hydrothermal method.