Anisotropic Gold Nanoparticles: Synthesis, Properties, Applications, and Toxicity

Highly Branched Au Superparticles as Efficient Photothermal Transducers for Optical Neuromodulation

Precise neuromodulation is critical for interrogating cellular communication and treating neurological diseases. Nanoscale transducers have emerged as effective interfaces to exert photothermal effects and modulate neural activities with a high spatiotemporal resolution. Ideal materials for this application should possess strong light absorption, high photothermal conversion efficiency, and great biocompatibility for clinical translation. Here, we show that the structurally designed 3D Au superparticles with a highly branched morphology can be promising candidates for nongenetic and remote neuromodulation. The structure-induced blackbody-like absorption endows Au superparticles with photothermal conversion efficiency over 90%, much higher than that of conventional Au nanorods. With the biocompatible polydopamine ligands, Au superparticles can be readily interfaced with primary mouse hippocampal neurons and other cells and can photostimulate or inhibit their activities in both cell networks or with a single-cell resolution. These findings highlight the importance of structural designs as powerful tools to promote the performance of plasmonic materials in neuromodulation and related research of neuroscience and neuroengineering.

Watermelon Derived Urease Immobilized Gold Nanoparticles-Graphene Oxide Transducer for Direct Detection of Urea in Milk Samples

Urea contamination in milk poses significant health risks, including kidney failure, urinary tract obstruction, fluid loss, shock, and gastrointestinal bleeding. This highlights the need for sensitive, rapid, and reliable methods to detect traces amount of urea in milk. In this study, we designed an electrochemical transducer for urea detection by utilizing purified watermelon urease (Urs), gold nanoparticles (AuNPs), and graphene oxide (GO). The nanomaterials and biosensor probe were characterized using UV-vis spectroscopy, XPS, TEM, XRD, FTIR, AFM, CV, EIS, and DPV. The engineered probe (GCE/AuNPs/GO/Urs) demonstrated a broad linear detection range of 5 to 90 mg/dL and a low limit of detection (LOD) of 0.037 (±0.012) mg/dL (RSD < 3.7%). The biosensor was tested for potential interferents that may be present in adulterated milk and an exceptionally low coefficient of selectivity (ksel <0.1) was obtained. Evaluation of milk samples from a local dairy farm showed good recovery rates from 93.13% to. 98.79% (RSD < 4.28%, n = 3), indicating reliable detection capabilities. Stability tests confirmed the sensor's reproducibility and consistent performance. Additionally, a comparison study of the system was carried out using the purified watermelon urease and the commercially available urease. Herein, the results obtained using the sensor probe was finally validated with the gold standard method.

Blue Shift of Localized Surface Plasmon Resonance of Gold Ultrathin Nanorod by Forming a Single Atomic Silver Shell via Antigalvanic Process

Gold ultrathin nanorods (Au UNRs) are anisotropic nanostructures constructed by attaching gold nanoclusters in one dimension. Au UNRs exhibit localized surface plasmon resonance (LSPR) only in the longitudinal direction because their diameter is smaller than the Fermi wavelength of an electron (<2 nm). In this study, we found that the LSPR wavelength of oleylamine-stabilized Au UNRs is blue-shifted simply by mixing with Ag(I). High-resolution elemental mapping and X-ray photoelectron spectroscopy of the resulting UNRs indicate that a Ag monatomic layer is formed on the Au UNR surface by the antigalvanic reduction of Ag(I). This process allowed us to synthesize a series of Au@Ag core-shell UNRs with LSPR wavelengths in the range of 1.2-2.0 μm.

Continuous flow synthesis and simulation-supported investigation of tunable plasmonic gold patchy nanoparticles

Plasmonic nanoparticles have intriguing optical properties which make them suitable candidates for sensing or theranostic applications. Anisotropic patchy particles, where metal is locally deposited on the surface of a core particle, exhibit plasmon resonances that can be specifically adjusted for these applications. However, many existing synthesis routes are complex, yield too little material, or provide particles with limited optical tunability. In this work, we present a simple and scalable continuous flow synthesis of gold-on-polystyrene patchy particles with widely adjustable optical properties. By increasing the chloride concentration in the electroless deposition of gold, we slow down the redox reduction kinetics and obtain a dense patch morphology as well as a reduced nucleation rate. The latter is counteracted by introducing a low-level seeding approach where a small number of gold nanocrystals heterocoagulate with the core particles prior to patch growth. Seeding and patch growth are performed in a continuous flow set-up with two T-shaped milli-mixers. The resulting patchy particle samples exhibit a tunable dipolar plasmon peak between 600 nm and 1100 nm. We also investigate the structure-property relationship for our gold patchy particles using finite element method simulations. After identifying a suitable patch shape model, we elucidate the influence of individual geometric parameters on the optical properties and show that the relationship holds true for a large range of patch coverages. Finally, we apply the relationship to explain the time-dependent change in the optical properties of as-synthesized patches by correlating it with the patch shape transformation revealed by electron microscopy.

Amelioration of gold nanoparticles mediated through Ocimum oil extracts induces reactive oxygen species and mitochondrial instability against MCF-7 breast carcinoma

Phytomedicines are potential immunity-boosting components with effective anticystic properties, minimal side effects, and biomedical applications, making them valuable for combating various diseases. India is renowned globally for Ayurveda, an ancient treatment methodology known for its holistic approach in identifying the root cause of diseases. Tulsi (Ocimum sanctum) is a common household medicine in India. While essential oils from plants like Tulsi have long been recognized for their medicinal properties, there is a gap in understanding their potential in synthesizing gold nanoparticles (AuNPs) and their efficacy against breast carcinoma, particularly in the context of immunosuppressive conditions. We investigated the potential application of essential oils isolated from O. sanctum in the synthesis of AuNPs and their efficacy against MCF-7 breast carcinoma. Gas chromatography-mass spectroscopy identified compounds with potential anticancer effects against breast cancer cells. Synthesised AuNPs displayed high hemocompatibility and antimicrobial activity against nosocomial Pseudomonas aeruginosa, Escherichia coli, Vibrio cholerae, and Bacillus subtilis strains. Os-AuNPs induced chromosomal instability and mitotic arrest in the G2/M cell cycle phase. Subsequent fluorescence and cell cytometry studies demonstrated the systemic release of ROS, depolarisation of mitochondrial membrane potential, and production of apoptotic bodies. DNA damage and comet assays confirmed the anticancer potential of synthesised AuNPs. This study illuminates the potential of O. sanctum-derived AuNPs in breast carcinoma treatment, paving the way for future AuNP-based therapies in biomedicine.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm-1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Wide-Dynamic-Range Control of Quantum-Electrodynamic Electron Transfer Reactions in the Weak Coupling Regime

Catalyzing reactions effectively by vacuum fluctuations of electromagnetic fields is a significant challenge within the realm of chemistry. As opposed to most studies based on vibrational strong coupling, we introduce an innovative catalytic mechanism driven by weakly coupled polaritonic fields. Through the amalgamation of macroscopic quantum electrodynamics (QED) principles with Marcus electron transfer (ET) theory, we predict that ET reaction rates can be precisely modulated across a wide dynamic range by controlling the size and structure of nanocavities. Compared to QED-driven radiative ET rates in free space, plasmonic cavities induce substantial rate enhancements spanning the range from 103- to 10-fold. By contrast, Fabry-Perot cavities engender rate suppression spanning the range from 10-2- to 10-1-fold. This work overcomes the necessity of using strong light-matter interactions in QED chemistry, opening up a new era of manipulating QED-based chemical reactions in a wide dynamic range.

Surface-Enhanced Raman Scattering Using 2D Materials

The use of surface-enhanced Raman scattering (SERS) as a technique for detecting small amounts of (bio)chemical analytes has become increasingly popular in various fields. While gold and silver nanostructures have been extensively studied as SERS substrates, the availability of other types of substrates is currently expanding the applications of this spectroscopic method. Recently, researchers have begun exploring two-dimensional (2D) materials (e. g., graphene-like nanostructures) as substrates for SERS analysis. These materials offer unique optical properties, a well-defined structure, and the ability to modify their surface chemistry. As a contribution to advance this field, this concept article highlights the significance of understanding the chemical mechanism that underlies the experimental Raman spectra of chemisorbed molecules onto 2D materials' surfaces. Therefore, the article discusses recent advancements in fabricating substrates using 2D layered materials and the synergic effects of using their metallic composites for SERS applications. Additionally, it provides a new perspective on using Raman imaging in developing 2D materials as analytical platforms for Raman spectroscopy, an exciting emerging research area with significant potential.

Tackling breast cancer with gold nanoparticles: twinning synthesis and particle engineering with efficacy

The World Health Organization identifies breast cancer as the most prevalent cancer despite predominantly affecting women. Surgery, hormonal therapy, chemotherapy, and radiation therapy are the current treatment modalities. Site-directed nanotherapeutics, engineered with multidimensional functionality are now the frontrunners in breast cancer diagnosis and treatment. Gold nanoparticles with their unique colloidal, optical, quantum, magnetic, mechanical, and electrical properties have become the most valuable weapon in this arsenal. Their advantages include facile modulation of shape and size, a high degree of reproducibility and stability, biocompatibility, and ease of particle engineering to induce multifunctionality. Additionally, the surface plasmon oscillation and high atomic number of gold provide distinct advantages for tailor-made diagnosis, therapy or theranostic applications in breast cancer such as photothermal therapy, radiotherapy, molecular labeling, imaging, and sensing. Although pre-clinical and clinical data are promising for nano-dimensional gold, their clinical translation is hampered by toxicity signs in major organs like the liver, kidneys and spleen. This has instigated global scientific brainstorming to explore feasible particle synthesis and engineering techniques to simultaneously improve the efficacy and versatility and widen the safety window of gold nanoparticles. The present work marks the first study on gold nanoparticle design and maneuvering techniques, elucidating their impact on the pharmacodynamics character and providing a clear-cut scientific roadmap for their fast-track entry into clinical practice.

Molecular Docking Approach for Biological Interaction of Green Synthesized Nanoparticles

In recent years, significant progress has been made in the subject of nanotechnology, with a range of methods developed to synthesize precise-sized and shaped nanoparticles according to particular requirements. Often, the nanoparticles are created by employing dangerous reducing chemicals to reduce metal ions into uncharged nanoparticles. Green synthesis or biological approaches have been used recently to circumvent this issue because biological techniques are simple, inexpensive, safe, clean, and extremely productive. Nowadays, much research is being conducted on how different kinds of nanoparticles connect to proteins and nucleic acids using molecular docking models. Therefore, this review discusses the most recent advancements in molecular docking capacity to predict the interactions between various nanoparticles (NPs), such as ZnO, CuO, Ag, Au, and Fe3O4, and biological macromolecules.

Organic-inorganic hybrid ZIF-8/MXene/cellulose-based textiles with improved antibacterial and electromagnetic interference shielding performance

Despite the tremendous efforts on developing antibacterial wearable textile materials containing Ti3C2Tx MXene, the singular antimicrobial mechanism, poor antibacterial durability, and oxidation susceptibility of MXene limits their applications. In this context, flexible multifunctional cellulosic textiles were prepared via layer-by-layer assembly of MXene and the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8). Specifically, the introduction of highly conductive MXene enhanced the interface interactions between the ZIF-8 layer and cellulose fibers, endowing the green-based materials with outstanding synergistic photothermal/photodynamic therapy (PTT/PDT) activity and adjustable electromagnetic interference (EMI) shielding performance. In-situ polymerization formed a MXene/ZIF-8 bilayer structure, promoting the generation of reactive oxygen species (ROS) while protecting MXene from oxidation. The as-prepared smart textile exhibited excellent bactericidal efficacy of >99.99 % against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 5 min of NIR (300 mW cm-2) irradiation which is below the maximum permissible exposure (MPE) limit. The sustained released Zn2+ from the ZIF-8 layer achieved a bactericidal efficiency of over 99.99 % within 48 h without NIR light. Furthermore, this smart textile also demonstrated remarkable EMI shielding efficiency (47.7 dB). Clearly, this study provides an elaborate strategy for designing and constructing multifunctional cellulose-based materials for a variety of applications.

Microfluidic-assisted formulation of cell membrane-camouflaged anisotropic nanostructures

Anisotropic gold (Au) nanostructures have been widely explored for various nanomedicine applications. While these nanomaterials have shown great promise for disease theranostics, particularly for cancer diagnosis and treatment, the utilization and clinical translation of anisotropic Au nanostructures have been limited by their high phagocytic uptake and clearance and low cancer targeting specificity. Numerous efforts have thus been made toward mitigating these challenges. Many conventional strategies, however, rely on all-synthetic materials, involve complex chemical processes, or have low product throughput and reproducibility. Herein, by integrating cell membrane coating and microfluidic technologies, a high-throughput bioinspired approach for synthesizing biomimetic anisotropic Au nanostructures with minimized phagocytic uptake and improved cancer cell targeting is reported. Through continuous hydrodynamic flow focusing, mixing, and sonication, Au nanostructures are encapsulated within the macrophage and cancer cell membrane vesicles effectively. The fabricated nanostructures are uniform and highly stable in serum. Importantly, the macrophage membrane vesicle-encapsulated Au nanostructures can be preferentially internalized by breast cancer cells, but not by macrophages. Overall, this study has demonstrated the feasibility of employing an integrated microfluidic-sonication technique to formulate uniform and highly stable biomimetic anisotropic nanostructures for enhanced cancer theranostic applications.

Antimicrobial peptide mimetic minimalistic approach leads to very short peptide amphiphiles-gold nanostructures for potent antibacterial activity

Strategically controlling concentrations of lipid-conjugated L-tryptophan (vsPA) guides the self-assembly of nanostructures, transitioning from nanorods to fibres and culminating in spherical shapes. The resulting Peptide-Au hybrids, exhibiting size-controlled 1D, 2D, and 3D nanostructures, show potential in antibacterial applications. Their high biocompatibility, favourable surface area-to-volume ratio, and plasmonic properties contribute to their effectiveness against clinically relevant bacteria. This controlled approach not only yields diverse nanostructures but also holds promise for applications in antibacterial therapeutics.

Supramolecular self-assembled gold nanoparticle clusters for synergistic photothermal-chemo tumor therapy

The combination of photothermal therapy and chemotherapy has emerged as a promising strategy to improve cancer therapeutic efficacy. However, developing a versatile nanoplatform that simultaneously possesses commendable photothermal effect and high drug encapsulation efficiency remains a challenging problem yet to be addressed. Herein, we report a facile supramolecular self-assembly strategy to construct gold nanoparticle clusters (AuNCs) for synergistic photothermal-chemo therapy. By utilizing the functional polysaccharide as a targeted ligand, hyaluronic acid-enriched AuNCs were endowed with targeting CD44 receptor overexpressed on the B16 cancer cells. Importantly, these hyaluronic acid modified AuNCs can shelter therapeutic cargo of doxorubicin (DOX) to aggregate larger nanoparticles via a host-guest interaction with the anchored β-cyclodextrin, as a "nanocluster-bomb" (DOX@AuNCs). The in vitro results revealed that these DOX@AuNCs showed light-triggered drug release behavior and synergistic photothermal-chemo therapy. The improved efficacy of synergistic therapy was further demonstrated by treating a xenografted B16 tumor model in vivo. We envision that our multipronged design of DOX@AuNCs provides a potent theranostic platform for precise cancer therapy and could be further enriched by introducing different imaging probes and therapeutic drugs as appropriate suitable guest molecules.

Novel nanoparticle AuNCs conjugated with Desmoglein-3 antibody for FL/CT dual-mode targeted imaging and precise treatment of lung squamous cell carcinoma

Due to lack of effective, early and non-invasive diagnostic as well as treatment tools, the surgical treatment opportunities for lung squamous cell carcinoma (SCC) are limited, resulting in high mortality rates. Therefore, the combination of targeted recognition and precise treatment of lung SCC is of great significance. In this study, a multifunctional nanoparticle is designed and synthesized, which specifically identifies lung SCC cells for target imaging and therapy. Desmoglein-3 (Dsg-3), a transmembrane glycoprotein found in desmosomes, is highly expressed in lung SCC cells. Gold nanoclusters (AuNCs) conjugated with Dsg-3 antibodies to form Au-Dsg-3 through coupling reaction. The results showed that the fluorescence imaging (FI) intensity and computed tomography (CT) signal of Au-Dsg-3 significantly increased within 6 h in vitro and in vivo, achieving dual-modal imaging to detect lung SCC effectively. Besides, Au-Dsg-3 even integrates targeted photothermal therapy (PTT) characteristics in a single nanoparticle. When exposed to near-infrared radiation (NIR), the temperature of the tumor site increased rapidly and reached a high temperature of 53.3 °C after 600 s, causing tumor ablation and growth inhibition. In summary, Au-Dsg-3 provides a key platform for targeted biological imaging and collaborative PTT, which demonstrates good performance on lung SCC.

Nanoscale engineering of gold nanostars for enhanced photoacoustic imaging

Photoacoustic (PA) imaging is a diagnostic modality that combines the high contrast resolution of optical imaging with the high tissue penetration of ultrasound. While certain endogenous chromophores can be visualized via PA imaging, many diagnostic assessments require the administration of external probes. Anisotropic gold nanoparticles are particularly valued as contrast agents, since they produce strong PA signals and do not photobleach. However, the synthesis of anisotropic nanoparticles typically requires cytotoxic reagents, which can hinder their biological application. In this work, we developed new PA probes based on nanostar cores and polymeric shells. These AuNS were obtained through one-pot synthesis with biocompatible Good's buffers, and were subsequently functionalized with polyethylene glycol, chitosan or melanin, three coatings widely used in (pre)clinical research. Notably, the structural features of the nanostar cores strongly affected the PA signal. For instance, despite displaying similar sizes (i.e. 45 nm), AuNS obtained with MOPS buffer generated between 2 and 3-fold greater signal intensities in the region between 700 and 800 nm than nanostars obtained with HEPES and EPPS buffers, and up to 25-fold stronger signals than spherical gold nanoparticles. A point source analytical model demonstrated that AuNS synthesized with MOPS displayed greater absorption coefficients than the other particles, corroborating the stronger PA responses. Furthermore, the AuNS shell not only improved the biocompatibility of the nanoconstructs but also affected their performance, with melanin coating enhancing the signal more than 4-fold, due to its own PA capacity, as demonstrated by both in vitro and ex vivo imaging. Taken together, these results highlight the strengths of gold nanoconstructs as PA probes and offer insights into the design rules for the nanoengineering of new nanodiagnostic agents.

Recent Advances in the Development of Antibiotics-Coated Gold Nanoparticles to Combat Antimicrobial Resistance

Antimicrobial resistance (AMR) has become an alarming threat to the successful treatment of rapidly growing bacterial infections due to the abuse and misuse of antibiotics. Traditional antibiotics bear many limitations, including restricted bioavailability, inadequate penetration and the emergence of antimicrobial-resistant microorganisms. Recent advances in nanotechnology for the introduction of nanoparticles with fascinating physicochemical characteristics have been predicted as an innovative means of defence against antimicrobial-resistant diseases. The use of nanoparticles provides several benefits, including improved tissue targeting, better solubility, improved stability, enhanced epithelial permeability and causes minimal side effects. However, except for gold nanoparticles (AuNPs), the biological safety of the majority of metal nanoparticles remains a serious problem. AuNPs appear to be promising for drug delivery and medicinal applications because of their minimal toxicity, biocompatibility, functional flexibility, chemical stability and versatile biological activities, such as their antiviral, antifungal, anti-inflammatory and antimicrobial properties. Hence, we are focusing on the gold nanoparticles possessing antimicrobial activity in this article. This review will cover recent strategies in the preparation of gold nanoparticles, with special emphasis placed on antibiotics-coated AuNPs with enhanced antimicrobial properties and how they fight against disease-causing bacteria and eradicate biofilms, along with their activities and physicochemical properties.

Rational approach to design gold nanoparticles for photothermal therapy: the effect of gold salt on physicochemical, optical and biological properties

Among the unique characteristics associated to gold nanoparticles (AuNPs) in biomedicine, their ability to convert light energy into heat opens ventures for improved cancer therapeutic options, such as photothermal therapy (PTT). PTT relies on the local hyperthermia of tumor cells upon irradiation with light beams, and the association of AuNPs with radiation within the near infrared (NIR) range constitutes an advantageous strategy to potentially improve PTT efficacy. Herein, it was explored the effect of the gold salt on the AuNPs' physicochemical and optical properties. Mostly spherical-like negatively charged AuNPs with variable sizes and absorbance spectra were obtained. In addition, photothermal features were assessed using in vitro phantom models. The best formulation showed the ability to increase their temperature in aqueous solution up to 19 °C when irradiated with a NIR laser for 20 min. Moreover, scanning transmission electron microscopy confirmed the rearrangement of the gold atoms in a face-centered cubic structure, which further allowed to calculate the photothermal conversion efficiency upon combination of theoretical and experimental data. AuNPs also showed local retention after being locally administered in in vivo models. These last results obtained by computerized tomography allow to consider these AuNPs as promising elements for a PTT system. Moreover, AuNPs showed high potential for PTT by resulting in in vitro cancer cells' viability reductions superior to 70 % once combine with 5 min of NIR irradiation.

3D plasmonic hexaplex paper sensor for label-free human saliva sensing and machine learning-assisted early-stage lung cancer screening

A label-free detection method for noninvasive biofluids enables rapid on-site disease screening and early-stage cancer diagnosis by analyzing metabolic alterations. Herein, we develop three-dimensional plasmonic hexaplex nanostructures coated on a paper substrate (3D-PHP). This flexible and highly absorptive 3D-PHP sensor is integrated with commercial saliva collection tube to create an efficient on-site sensing platform for lung cancer screening via surface-enhanced Raman scattering (SERS) measurement of human saliva. The multispike hexaplex-shaped gold nanostructure enhances contact with saliva viscosity, enabling effective sampling and SERS enhancement. Through testing patient salivary samples, the 3D-PHP sensor demonstrates successful lung cancer detection and diagnosis. A logistic regression-based machine learning model successfully classifies benign and malignant patients, exhibiting high clinical sensitivity and specificity. Additionally, important Raman peak positions related to different lung cancer stages are investigated, suggesting insights for early-stage cancer diagnosis. Integrating 3D-PHP senor with the conventional saliva collection tube platform is expected to offer promising practicality for rapid on-site disease screening and diagnosis, and significant advancements in cancer detection and patient care.

Pb2+ Ion Sensors Employing Gold Etching Process: Comparative Investigation on Au Nanorods and Au Nanotriangles

The leaching phenomenon of gold (Au) nanomaterials by Pb2+ ions in the presence of 2-mercaptoethanol (2-ME) and thiosulfate (S2O32- ion) has been systematically applied to a Pb2+ ion sensor. To further investigate the role of Pb2+ ions in sensors containing Au nanomaterials, we revisited the leaching conditions for Au nanorods and compared them with the results for Au nanotriangles. By monitoring the etching rate, it was revealed that Pb2+ ions were important for the acceleration of the etching rate mainly driven by 2-ME and S2O32- pairs, and nanomolar detection of Pb2+ ions were shown to be promoted through this catalytic effect. Using the etchant, the overall size of the Au nanorods decreased but showed an unusual red-shift in UV-Vis spectrum indicating increase of aspect ratio. Indeed, the length of Au nanorods decreased by 9.4% with the width decreasing by 17.4% over a 30-min reaction time. On the other hand, the Au nanotriangles with both flat sides surrounded mostly by dense Au{111} planes showed ordinary blue-shift in UV-Vis spectrum as the length of one side was reduced by 21.3%. By observing the changes in the two types of Au nanomaterials, we inferred that there was facet-dependent alloy formation with lead, and this difference resulted in Au nanotriangles showing good sensitivity, but lower detection limits compared to the Au nanorods.

Role of Surface Curvature in Gold Nanostar Properties and Applications

Gold nanostars (AuNSs) are nanoparticles with intricate three-dimensional structures and shape-dependent optoelectronic properties. For example, AuNSs uniquely display three distinct surface curvatures, i.e. neutral, positive, and negative, which provide different environments to adsorbed ligands. Hence, these curvatures are used to introduce different surface chemistries in nanoparticles. This review summarizes and discusses the role of surface curvature in AuNS properties and its impact on biomedical and chemical applications, including surface-enhanced Raman spectroscopy, contrast agent performance, and catalysis. We examine the main synthetic approaches to generate AuNSs, control their morphology, and discuss their benefits and drawbacks. We also describe the optical characteristics of AuNSs and discuss how these depend on nanoparticle morphology. Finally, we analyze how AuNS surface curvature endows them with properties distinctly different from those of other nanoparticles, such as strong electromagnetic fields at the tips and increased hydrophilic environments at the indentations, together making AuNSs uniquely useful for biosensing, imaging, and local chemical manipulation.

Sensitization Strategies of Lateral Flow Immunochromatography for Gold Modified Nanomaterials in Biosensor Development

Gold nanomaterials have become very attractive nanomaterials for biomedical research due to their unique physical and chemical properties, including size dependent optical, magnetic and catalytic properties, surface plasmon resonance (SPR), biological affinity and structural suitability. The performance of biosensing and biodiagnosis can be significantly improved in sensitivity, specificity, speed, contrast, resolution and so on by utilizing multiple optical properties of different gold nanostructures. Lateral flow immunochromatographic assay (LFIA) based on gold nanoparticles (GNPs) has the advantages of simple, fast operation, stable technology, and low cost, making it one of the most widely used in vitro diagnostics (IVDs). However, the traditional colloidal gold (CG)-based LFIA can only achieve qualitative or semi-quantitative detection, and its low detection sensitivity cannot meet the current detection needs. Due to the strong dependence of the optical properties of gold nanomaterials on their shape and surface properties, gold-based nanomaterial modification has brought new possibilities to the IVDs: people have attempted to change the morphology and size of gold nanomaterials themselves or hybrid with other elements for application in LFIA. In this paper, many well-designed plasmonic gold nanostructures for further improving the sensitivity and signal output stability of LFIA have been summarized. In addition, some opportunities and challenges that gold-based LFIA may encounter at present or in the future are also mentioned in this paper. In summary, this paper will demonstrate some feasible strategies for the manufacture of potential gold-based nanobiosensors of post of care testing (POCT) for faster detection and more accurate disease diagnosis.

Rapid and sensitive detection of SARS-CoV-2 virus in human saliva samples using glycan based nanozyme: a clinical study

A highly sensitive colorimetric method (glycan-based nano(e)zyme) was developed for sensitive and rapid detection of the SARS-CoV-2 virus based on N-acetyl neuraminic acid (sialic acid)-functionalized gold nanoparticles (SA-Au NZs). A number of techniques were used to characterize the prepared nanomaterials including XRD, FT-IR, UV-vis, DLS, and TEM. DLS analysis indicates an average hydrodynamic size of 34 nm, whereas TEM analysis indicates an average particle size of 15.78 nm. This observation confirms that water interacts with nanoparticle surfaces, resulting in a large hydrodynamic diameter. The peroxidase-like activity of SA-Au NZs was examined with SARS-CoV-2 and influenza viruses (influenza A (H1N1), influenza A (H3N2), and influenza B). UV-visible spectroscopy was used to monitor and record the results, as well as naked eye detection (photographs). SA-Au NZs exhibit a change in color from light red to purple when SARS-CoV-2 is present, and they exhibit a redshift in their spectrum. N-acetyl neuraminic acid interacts with SARS-CoV-2 spike glycoprotein, confirming its ability to bind glycans. As a result, SA-Au NZs can detect COVID-19 with sensitivity and specificity of over 95% and 98%, respectively. This method was approved by testing saliva samples from 533 suspected individuals at Ghaem Hospital of Mashhad, Mashhad, Iran. Sensitivity and specificity were calculated by comparing the results with the definitive results. The positive results were accompanied by a color change from bright red to purple within five minutes. Statistical analysis was performed based on variables such as age, gender, smoking, diabetes, hypertension, and lung involvement. In clinical trials, it was demonstrated that this method can be used to diagnose SARS-CoV-2 in a variety of places, such as medical centers, hospitals, airports, universities, and schools.

Controlled formation of gold nanoparticles with tunable plasmonic properties in tellurite glass

Silicate glasses with metallic nanoparticles (NPs) have been of intense interest in art, science and technology as the plasmonic properties of these NPs equip glass with light modulation capability. The so-called striking technique has enabled precise control of the in situ formation of metallic NPs in silicate glasses for applications from coloured glasses to photonic devices. Since tellurite glasses exhibit the unique combination of comparably easy fabrication, low phonon energy, wide transmission window and high solubility of luminescent rare earth ions, there has been a significant amount of work over the past two decades to adapt the striking technique to form gold or silver NPs in tellurite glasses. Despite this effort, the striking technique has remained insufficient for tellurite glasses to form metal NPs suitable for photonic applications. Here, we first uncover the challenges of the traditional striking technique to create gold NPs in tellurite glass. Then, we demonstrate precise control of the size and concentration of gold NPs in tellurite glass by developing new approaches to both steps of the striking technique: a controlled gold crucible corrosion technique to incorporate gold ions in tellurite glass and a glass powder reheating technique to subsequently transform the gold ions to gold NPs. Using the Mie theory, the size, size distribution and concentration of the gold NPs formed in tellurite glass are determined from the plasmonic properties of the NPs. This fundamental research provides guidance for designing and manipulating the plasmonic properties in tellurite glass for photonics research and applications.

Multiple Isothermal Amplification Coupled with CRISPR-Cas14a for the Naked-eye and Colorimetric Detection of Aflatoxin B1

Aflatoxin B1 (AFB1) is highly toxic and challenging to remove, posing significant risks to both human health and economic development. Therefore, there is an urgent need to develop rapid, simple, and sensitive detection technologies. In this study, we introduce a naked-eye and colorimetric method based on multiple isothermal amplifications coupled with CRISPR-Cas14a and investigate its biosensing properties. This technique utilizes composite nanoprobes (MAPs) comprising magnetic nanoparticles and gold nanoparticles. AFB1 is efficiently identified through an aptamer competition process facilitated by magnetic nanoparticles , which triggers multiple isothermal amplification. This converts trace amounts of the toxin into a large quantity of DNA signal. Upon specific activation of the CRISPR-Cas14a complex, the MAPs are cleaved, resulting in significant changes in both color and colorimetric signal. The method demonstrates acceptable sensitivity, with a detection limit of 31.90 pg mL-1 and a wide detection range from 0.05 to 10 ng mL-1. Furthermore, the assay exhibits satisfactory specificity and high accuracy when it is applied to practical samples. Our approach offers a universal sensing platform with potential applications in food safety, environmental monitoring, and clinical diagnostics.

Controlled synthesis of monodisperse gold nanorods with a small diameter of around 10 nm and largest plasmon wavelength of 1200 nm

Gold nanorods have been widely used in various fields due to their tunable anisotropic localized surface plasmon resonance (SPR) property. The facile preparation of gold nanorods with a tunable SPR wavelength extending to a near-infrared window, and at the same time, a relatively small particle size for facilitating applications especially in the biomedical field is of great value yet highly challenging. In this work, a new reducing agent, 1,6-dihydroxynaphthalene, is proposed for the synthesis of gold nanorods. The results indicate that gold nanorods with good monodispersity, high shape yield, maximum SPR wavelength of 1200 nm, and especially small diameter of around 10 nm can be acquired simultaneously. In terms of spectral and size controls, by respectively varying the experimental parameters including the amount of silver ions, reducing agents, and gold seeds not only can a good linear correlation be acquired corresponding to a SPR wavelength ranging from around 600 nm to 1200 nm, but a regular change in the particle diameter from 10.5 nm to 7.5 nm could also be observed. The structural and morphological evolutions of the particle for each changed parameter were carefully studied, and insights were gained into the growth mechanism based on the detailed analysis of particle evolution at a specific stage of the growth process.

Nanoscale goldbeating: Solid-state transformation of 0D and 1D gold nanoparticles to anisotropic 2D morphologies

Goldbeating is the ancient craft of thinning bulk gold (Au) into gossamer leaves. Pioneered by ancient Egyptian craftsmen, modern mechanized iterations of this technique can fabricate sheets as thin as ∼100 nm. We take inspiration from this millennia-old craft and adapt it to the nanoscale regime, using colloidally synthesized 0D/1D Au nanoparticles (AuNPs) as highly ductile and malleable nanoscopic Au ingots and subjecting them to solid-state, uniaxial compression. The applied stress induces anisotropic morphological transformation of AuNPs into 2D leaf form and elucidates insights into metal nanocrystal deformation at the extreme length scales. The induced 2D morphology is found to be dependent on the precursor 0D/1D NP morphology, size (0D nanosphere diameter and 1D nanorod diameter and length), and their on-substrate arrangement (e.g., interparticle separation and packing order) prior to compression. Overall, this versatile and generalizable solid-state compression technique enables new pathways to synthesize and investigate the anisotropic morphological transformation of arbitrary NPs and their resultant emergent phenomena.

Spatiotemporally controlled drug delivery via photothermally driven conformational change of self-integrated plasmonic hybrid nanogels

BACKGROUND

Spatiotemporal regulation is one of the major considerations for developing a controlled and targeted drug delivery system to treat diseases efficiently. Light-responsive plasmonic nanostructures take advantage due to their tunable optical and photothermal properties by changing size, shape, and spatial arrangement.

RESULTS

In this study, self-integrated plasmonic hybrid nanogels (PHNs) are developed for spatiotemporally controllable drug delivery through light-driven conformational change and photothermally-boosted endosomal escape. PHNs are easily synthesized through the simultaneous integration of gold nanoparticles (GNPs), thermo-responsive poly (N-isopropyl acrylamide), and linker molecules during polymerization. Wave-optic simulations reveal that the size of the PHNs and the density of the integrated GNPs are crucial factors in modulating photothermal conversion. Several linkers with varying molecular weights are inserted for the optimal PHNs, and the alginate-linked PHN (A-PHN) achieves more than twofold enhanced heat conversion compared with others. Since light-mediated conformational changes occur transiently, drug delivery is achieved in a spatiotemporally controlled manner. Furthermore, light-induced heat generation from cellular internalized A-PHNs enables pinpoint cytosolic delivery through the endosomal rupture. Finally, the deeper penetration for the enhanced delivery efficiency by A-PHNs is validated using multicellular spheroid.

CONCLUSION

This study offers a strategy for synthesizing light-responsive nanocarriers and an in-depth understanding of light-modulated site-specific drug delivery.

α-Amino Acids as Reducing and Capping Agents in Gold Nanoparticles Synthesis Using the Turkevich Method

Amino acid-capped gold nanoparticles (AuNPs) are a promising tool for various applications, including therapeutics and diagnostics. Most often, amino acids are used to cap AuNPs synthesized with other reducing agents. However, only a few studies have been dedicated to using α-amino acids as reducing and capping agents in AuNPs synthesis. Hence, there are still several gaps in understanding their role in reducing gold salts. Here, we used 20 proteinogenic α-amino acids and one non-proteinogenic α-amino acid in analogy to sodium citrate as reducing and capping agents in synthesizing AuNPs using the Turkevich method. Only four of the twenty-one investigated amino acids have not yielded gold nanoparticles. The shape, size distribution, stability, and optical properties of synthesized nanoparticles were characterized by scanning electron microscopy, differential centrifugal sedimentation, the phase analysis light scattering technique, and UV-vis spectroscopy. The physicochemical characteristics of synthesized AuNPs varied with the amino acid used for the reduction. We proposed that in the initial stage of gold salts reduction most of the used α-amino acids behave similarly to citrate in the Turkevich method. However, their different physicochemical properties resulting from differences in their chemical structures significantly influence the outcomes of reactions.

Novel one-pot strategy for fabrication of a pH-Responsive bone-targeted drug self-frame delivery system for treatment of osteoporosis

Osteoporosis (OP) is a systemic metabolic orthopedic disorder prevalent in elderly people, that is characterized by a decrease in bone mass. Although many therapeutics have been adopted for OP treatment, many of them are still not well satisfied clinical requirements and therefore development of novel therapeutics is of great significance. In this work, a novel bone-targeting drug self-frame delivery system (DSFDS) with high drug loading efficiency and pH responsive drug release was fabricated by condensation of curcumin (Cur), amino group terminated polyethylene glycol (NH2-PEG), and alendronate (ALN) using hexachlorocyclotriphosphonitrile (HCCP) as the linker. The final product named as HCCP-Cur-PEG-ALN (HCPA NPs) displayed excellent water dispersity with small size (181.9 ​± ​25.9 ​nm). Furthermore, the drug loading capacity of Cur can reach 25.8%, and Cur can be released from HCPA NPs under acidic environment. Owing to the introduction of ALN, HCPA NPs exhibited strong binding to HAp in vitro and excellent bone-targeting effect in vivo. Results from cellular and biochemical analyses revealed that HCPA NPs could effectively inhibit the formation and differentiation function of osteoclasts. More importantly, we also demonstrated that HCPA NPs could effectively reduce bone loss in OVX mice with low toxicity to major organs. The above results clearly demonstrated that HCPA NPs are promising for OP treatment. Given the simplicity and well designability of fabrication strategy, explicit therapy efficacy and low toxicity of HCPA NPs, we believe that this work should be of great interest for fabrication of various DSFDS to deal with many diseases.

Intrinsic Optical Properties and Emerging Applications of Gold Nanostructures

The collective oscillation of free electrons at the nanoscale surface of gold nanostructures is closely modulated by tuning the size, shape/morphology, phase, composition, hybridization, assembly, and nanopatterning, along with the surroundings of the plasmonic surface located at a dielectric interface with air, liquid, and solid. This review first introduces the physical origin of the intrinsic optical properties of gold nanostructures and further summarizes stimuli-responsive changes in optical properties, metal-field-enhanced optical signals, luminescence spectral shaping, chiroptical response, and photogenerated hot carriers. The current success in the landscape of nanoscience and nanotechnology mainly originates from the abundant optical properties of gold nanostructures in the thermodynamically stable face-centered cubic (fcc) phase. It has been further extended by crystal phase engineering to prepare thermodynamically unfavorable phases (e.g., kinetically stable) and heterophases to modulate their intriguing phase-dependent optical properties. A broad range of promising applications, including but not limited to full-color displays, solar energy harvesting, photochemical reactions, optical sensing, and microscopic/biomedical imaging, have fostered parallel research on the multitude of physical effects occurring in gold nanostructures.

Advances in CO2 utilization employing anisotropic nanomaterials as catalysts: a review

Anisotropic nanomaterials are materials with structures and properties that vary depending on the direction in which they are measured. Unlike isotropic materials, which exhibit uniform physical properties in all directions, anisotropic materials have different mechanical, electrical, thermal, and optical properties in different directions. Examples of anisotropic nanomaterials include nanocubes, nanowires, nanorods, nanoprisms, nanostars, and so on. These materials have unique properties that make them useful in a variety of applications, such as electronics, energy storage, catalysis, and biomedical engineering. One of the key advantages of anisotropic nanomaterials is their high aspect ratio, which refers to the ratio of their length to their width, which can enhance their mechanical and electrical properties, making them suitable for use in nanocomposites and other nanoscale applications. However, the anisotropic nature of these materials also presents challenges in their synthesis and processing. For example, it can be difficult to align the nanostructures in a specific direction to impart modulation of a specific property. Despite these challenges, research into anisotropic nanomaterials continues to grow, and scientists are working to develop new synthesis methods and processing techniques to unlock their full potential. Utilization of carbon dioxide (CO₂) as a renewable and sustainable source of carbon has been a topic of increasing interest due to its impact on reducing the level of greenhouse gas emissions. Anisotropic nanomaterials have been used to improve the efficiency of CO₂ conversion into useful chemicals and fuels using a variety of processes such as photocatalysis, electrocatalysis, and thermocatalysis. More study is required to improve the usage of anisotropic nanomaterials for CO₂ consumption and to scale up these technologies for industrial use. The unique properties of anisotropic nanomaterials, such as their high surface area, tunable morphology, and high activity, make them promising catalysts for CO₂ utilization. This review article discusses briefly about various approaches towards the synthesis of anisotropic nanomaterials and their applications in CO₂ utilization. The article also highlights the challenges and opportunities in this field and the future direction of research.

An anisotropic nanobox based core-shell-satellite nanoassembly of multiple SERS enhancement with heterogeneous interface for stroke marker determination

Herein, A novel gold-silver alloy nanobox (AuAgNB)@SiO₂-gold nanosphere (AuNP) nanoassembly based on core-shell-satellite structure is fabricated and applied to the surface-enhanced Raman scattering (SERS) detection of S100 calcium-binding protein B protein (S100B). It contains an anisotropic hollow porous AuAgNB core with rough surface, an ultrathin silica interlayer labeled with reporter molecules, and AuNP satellites. The nanoassemblies were systematically optimized by tuning the reporter molecules concentration, silica layer thickness, AuAgNB size, and the size and number of AuNP satellite size. Remarkably, AuNP satellites are adjacent to AuAgNB@SiO₂, developing AuAg-SiO₂-Au heterogeneous interface. With the strong plasmon coupling between AuAgNB and AuNP satellites, chemical enhancement from heterogeneous interface, and the tip "hot spots" of AuAgNB, the SERS activity of the nanoassemblies was multiply enhanced. Additionally, the stability of nanostructure and Raman signal was significantly improved by the silica interlayer and AuNP satellites. Eventually, the nanoassemblies were applied for S100B detection. It demonstrated satisfactory sensitivity and reproducibility with a wide detection range of 10 fg/mL-10 ng/mL and a limit of detection (LOD) of 1.7 fg/mL. This work based on the AuAgNB@SiO₂-AuNP nanoassemblies with multiple SERS enhancements and favorable stability demonstrates the promising application in stroke diagnosis.

From sandwich complexes to dendrimers: journey toward applications to sensing, molecular electronics, materials science, and biomedicine

This review links various areas of inorganic chemistry around the themes developed by our research group during the last four decades. It is firstly based on the electronic structure of iron sandwich complexes, showing how the metal electron count dictates their reactivities, with various applications (via C-H activation, C-C bond formation) as reducing and oxidizing agents, redox and electrocatalysts and precursors of dendrimers and catalyst templates through bursting reactions. Various electron-transfer processes and consequences are explored, including the influence of the redox state on the acidity of robust ligands and the possibility to iterate in situ C-H activation and C-C bond formation to build arene-cored dendrimers. Examples of how these dendrimers are functionalized are illustrated using the cross olefin metathesis reactions, with application to the synthesis of soft nanomaterials and biomaterials. Mixed and average valence complexes give rise to remarkable subsequent organometallic reactions, including the salt influence on these reactions. The stereo-electronic aspect of these mixed valencies is pointed out in star-shaped multi-ferrocenes with a frustration effect and other multi-organoiron systems, with the perspective of understanding electron-transfer processes among dendrimer redox sites involving electrostatic effects and application to redox sensing and polymer metallocene batteries. Dendritic redox sensing is summarized for biologically relevant anions such as ATP^2- with supramolecular exoreceptor interactions at the dendrimer periphery in parallel with the seminal work on metallocene-derived endoreceptors by Beer's group. This aspect includes the design of the first metallodendrimers that have applications in both redox sensing and micellar catalysis with nanoparticles. These properties provide the opportunity to summarize the biomedical (mostly anticancer) applications of ferrocenes, dendrimers and dendritic ferrocenes in biomedicine (in particular the contribution from our group, but not only). Finally, the use of dendrimers as templates for catalysis is illustrated with numerous reactions including C-C bond formation, click reactions and H₂ production reactions.

Contact lenses that transform gold into nanoparticles for prophylaxis of light-related events and photothermal therapy

This work describes for first time how anisotropic gold nanoparticles (AuNPs) can be spontaneously formed inside preformed contact lenses (CLs) avoiding the use of additional reductant agents (reagent-free) through a precise tunning of the monomeric composition, the saline concentration, and the application of steam heat sterilization. Protocols to generate AuNPs in solution using inorganic or small organic reductants are widely available. Differently, gold precursors interactions with polymer networks have been overlooked and, thus, the interest of chemically cross-linked hydrogels as organic reductants is still to be elucidated. In the ocular field, incorporation of AuNPs to CLs may expand their applications in prophylaxis, therapy and diagnosis. To carry out the work, a variety of hydrogels and commercially available CLs were incubated with gold salt solution without any other chemical reagent. AuNPs formation was monitored by changes in localized surface plasmon resonance (LSPR) bands and quantifying the gold sorbed. Only silicone hydrogels induced AuNPs formation at room temperature in few days; methacrylic acid red-shifted the LSPR band (550-600 nm), while monomers bearing F hindered the reduction. Storage of hydrogels in the gold precursor solution allowed a gradual formation of anisotropic AuNPs, which could be stopped at any time by washing the hydrogel with water. The developed CLs behave as efficient filters against highly penetrant light and also exhibit photoresponsiveness as demonstrated as rapid (10 seconds), focused mild hyperthermia when irradiated with green, red and NIR lasers.

Remarkably and stable catalytic activity in reduction of 4-nitrophenol by sodium sesquicarbonate-supporting Fe2O3@Pt

Reasonable design of bimetallic nanomaterials with support is beneficial to improve catalytic performance. This work reports a new kind of sodium sesquicarbonate-supporting Fe₂O₃@Pt via etching Fe₃O₄@Pt@SiO₂, which exhibits highly efficient and stable catalytic reduction performance towards 4-NP. Sodium sesquicarbonate-supporting Fe₂O₃@Pt has an interconnected one-dimensional network structure that provides sufficient channels for mass transfer. At the same time, a large amount of Fe₂O₃@Pt is exposed on its surface, which hinders the aggregation of pt clusters and Fe₂O₃ nanoparticles, and facilitates the direct contact of Fe₂O₃@Pt reaction sites with reactant molecules, thus improving the catalytic rate of 4-NP reduction reaction. Moreover, the introduction of non-metallic Fe can not only reduce the consumption of precious metal Pt, but also improve the catalytic efficiency due to the synergistic effect. This study opens up a new avenue to develop robust catalysts for heterogeneous catalytic reactions.

Gold Nanomaterials-Implemented CRISPR-Cas Systems for Biosensing

Due to their superiority in the simple design and precise targeting, clustered regularly interspaced short palindromic repeats (CRISPR)-Cas systems have attracted significant interest for biosensing. On the one hand, CRISPR-Cas systems have the capacity to precisely recognize and cleave specific DNA and RNA sequences. On the other hand, CRISPR-Cas systems such as orthologs of Cas9, Cas12, and Cas13 exhibit cis-cleavage or trans-cleavage activities after recognizing the target sequence. Owing to the cleavage activities, CRISPR-Cas systems can be designed for biosensing by degrading tagged nucleic acids to produce detectable signals. To meet the requirements of point-of-care detection and versatile signal readouts, gold nanomaterials with excellent properties such as high extinction coefficients, easy surface functionalization, and biocompatibility are implemented in CRISPR-Cas-based biosensors. In combination with gold nanomaterials such as gold nanoparticles, gold nanorods, and gold nanostars, great efforts are devoted to fabricating CRISPR-Cas-based biosensors for the detection of diverse targets. This review focuses on the current advances in gold nanomaterials-implemented CRISPR-Cas-based biosensors, particularly the working mechanism and the performance of these biosensors. CRISPR-Cas systems, including CRISPR-Cas9, CRISPR-Cas12a, and CRISPR-Cas13a are discussed and highlighted. Meanwhile, prospects and challenges are also discussed in the design of biosensing strategies based on gold nanomaterials and CRISPR-Cas systems.

Kinetically and thermodynamically controlled one-pot growth of gold nanoshells with NIR-II absorption for multimodal imaging-guided photothermal therapy

Since the successful clinical trial of AuroShell for photothermal therapy, there is currently intense interest in developing gold-based core-shell structures with near-infrared (NIR) absorption ranging from NIR-I (650-900 nm) to NIR-II (900-1700 nm). Here, we propose a seed-mediated successive growth approach to produce gold nanoshells on the surface of the nanoscale metal-organic framework (NMOF) of UiO-66-NH₂ (UiO = the University of Oslo) in one pot. The key to this strategy is to modulate the proportion of the formaldehyde (reductant) and its regulator / oxidative product of formic acid to harness the particle nucleation and growth rate within the same system. The gold nanoshells propagate through a well-oriented and controllable diffusion growth pattern (points → facets → octahedron), which has not been identified. Most strikingly, the gold nanoshells prepared hereby exhibit an exceedingly broad and strong absorption in NIR-II with a peak beyond 1300 nm and outstanding photothermal conversion efficiency of 74.0%. Owing to such superior performance, these gold nanoshells show promising outcomes in photoacoustic (PA), computed tomography (CT), and photothermal imaging-guided photothermal therapy (PTT) for breast cancer, as demonstrated both in vitro and in vivo.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

Fabrication of Adjustable Au/Carbon Hybrid Nanozymes with Photothermally Enhanced Peroxidase Activity and Ultra-sensitivity for Glutathione Detection

Au nanozymes are extensively researched for their photothermal effect and catalytic performance, but overcoming the inherent defects of poor dispersibility and thermal stability through complementary materials will expand their prospects for biological applications. Herein, several novel CAu nanozymes were fabricated by in situ reduction of chloroauric acid on hollow carbon nanospheres (HCNs). Through regulating the number of reductions, sesame ball-shaped CAu (sCAu) with highly dispersed Au nanoparticles and diversity-shaped CAu (dCAu) were obtained. The number and morphology of loaded Au nanoparticles, absorption spectra, and hydrophilicity of CAu nanozymes were systematically characterized to demonstrate the flexibility of this novel method. The high-efficiency peroxidase-like sCAu0.3 nanozyme with hyperthermia-activated property was then screened for later bio-application. It is worth mentioning that its photothermal-promoted peroxidase-like activity could be achieved under near-infrared laser irradiation. Moreover, sCAu0.3 could specifically achieve glutathione detection in human blood samples. This method will provide a protocol for the regulation of CAu nanozymes to adapt to bio-detection applications.

A review on nanoparticles: characteristics, synthesis, applications, and challenges

The significance of nanoparticles (NPs) in technological advancements is due to their adaptable characteristics and enhanced performance over their parent material. They are frequently synthesized by reducing metal ions into uncharged nanoparticles using hazardous reducing agents. However, there have been several initiatives in recent years to create green technology that uses natural resources instead of dangerous chemicals to produce nanoparticles. In green synthesis, biological methods are used for the synthesis of NPs because biological methods are eco-friendly, clean, safe, cost-effective, uncomplicated, and highly productive. Numerous biological organisms, such as bacteria, actinomycetes, fungi, algae, yeast, and plants, are used for the green synthesis of NPs. Additionally, this paper will discuss nanoparticles, including their types, traits, synthesis methods, applications, and prospects.

Papaya latex mediated synthesis of prism shaped proteolytic gold nanozymes

Beyond natural enzymes, the artificially synthesized nanozymes have attracted a significant interest as it can overcome the limitations of the former. Here, we report synthesis of shape controlled nanozymes showing proteolytic activity using Carica papaya L. (papaya) latex. The nanozymes synthesized under optimized reaction conditions exhibited sharp SPR peak around 550 nm with high abundance (45.85%) of prism shaped particles. FTIR analysis and coagulation test indicated the presence of papaya latex enzymes as capping agents over the gold nanoprisms. The milk clot assay and the inhibition test with egg white confirmed the proteolytic activity of the nanozymes and the presence of cysteine protease on it, respectively. The nanozymes were found to be biocompatible and did not elicit any toxic response in both in-vitro and in-vivo study. Based on our findings, we envisage that these biocompatible, shape-specific nanozymes can have potential theragnostic applications.

Plasmonic visible-near infrared photothermal activation of olefin metathesis enabling photoresponsive materials

Light-induced catalysis and thermoplasmonics are promising fields creating many opportunities for innovative research. Recent advances in light-induced olefin metathesis have led to new applications in polymer and material science, but further improvements to reaction scope and efficiency are desired. Herein, we present the activation of latent ruthenium-based olefin metathesis catalysts via the photothermal response of plasmonic gold nanobipyramids. Simple synthetic control over gold nanobipyramid size results in tunable localized surface plasmon resonance bands enabling catalyst initiation with low-energy visible and infrared light. This approach was applied to the ROMP of dicyclopentadiene, affording plasmonic polymer composites with exceptional photoresponsive and mechanical properties. Moreover, this method of catalyst activation was proven to be remarkably more efficient than activation through conventional heating in all the metathesis processes tested. This study paves the way for providing a wide range of photoinduced olefin metathesis processes in particular and photoinduced latent organic reactions in general by direct photothermal activation of thermally latent catalysts.

Light-Induced Clusterization of Gold Nanoparticles: A New Photo-Triggered Antibacterial against E. coli Proliferation

Metallic nanoparticles show plasmon resonance phenomena when irradiated with electromagnetic radiation of a suitable wavelength, whose value depends on their composition, size, and shape. The damping of the surface electron oscillation causes a release of heat, which causes a large increase in local temperature. Furthermore, this increase is enhanced when nanoparticle aggregation phenomena occur. Local temperature increase is extensively exploited in photothermal therapy, where light is used to induce cellular damage. To activate the plasmon in the visible range, we synthesized 50 nm diameter spherical gold nanoparticles (AuNP) coated with polyethylene glycol and administered them to an E. coli culture. The experiments were carried out, at different gold nanoparticle concentrations, in the dark and under irradiation. In both cases, the nanoparticles penetrated the bacterial wall, but a different toxic effect was observed; while in the dark we observed an inhibition of bacterial growth of 46%, at the same concentration, under irradiation, we observed a bactericidal effect (99% growth inhibition). Photothermal measurements and SEM observations allowed us to conclude that the extraordinary effect is due to the formation, at low concentrations, of a light-induced cluster of gold nanoparticles, which does not form in the absence of bacteria, leading us to the conclusion that the bacterium wall catalyzes the formation of these clusters which are ultimately responsible for the significant increase in the measured temperature and cause of the bactericidal effect. This photothermal effect is achieved by low-power irradiation and only in the presence of the pathogen: in its absence, the lack of gold nanoparticles clustering does not lead to any phototoxic effect. Therefore, it may represent a proof of concept of an innovative nanoscale pathogen responsive system against bacterial infections.

Plasmon-enhanced photocatalysis using gold nanoparticles encapsulated in nanoscale molybdenum oxide shell

Using solar energy to enhance the transformation rate of organic molecules is a promising strategy to advance chemical synthesis and environmental remediation. Plasmonic nanoparticles responsive to sunlight show great promise in the catalysis of chemical reactions. In this work, we used a straightforward wet-chemistry method to synthesize plasmonic octahedral gold nanoparticles (NPs) coated with thin molybdenum oxide (MoO_3-x), Au@MoO_3-xNPs, which exhibited strong surface plasmon resonance in a broad wavelength range. The synthesized Au@MoO_3-xNPs were characterized by UV-vis, SEM, TEM, EDS, XPS, and the electrochemical technique of cyclic voltammetry (CV). The catalytic performance of Au@MoO_3-xNPs under visible light irradiation was investigated using the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) as a model reaction. The presence of a thin capping layer of MoO_3-xon our Au NPs contributed to the broadening of their range of absorption of visible light, resulting in a stronger intra-particle plasmonic resonance and the modulation of surface energy and electronic state. Accordingly, the kinetics of plasmon photocatalytic transformation of 4-NP to 4-AP was significantly accelerated (by a factor of 8.1) under visible light, compared to uncapped Au NPs in the dark. Our as-synthesized Au@MoO_3-xNPs is an example that the range of plasmonic wavelengths of NPs can be effectively broadened by coating them with another plasmon-active (semiconducting) material, which substantially improves their plasmonic photocatalytic performance. Meanwhile, the synthesized Au@MoO_3-xNPs can be used to accelerate the transformation of organic molecules under visible light irradiation.

Antibiotic-Loaded Gold Nanoparticles: A Nano-Arsenal against ESBL Producer-Resistant Pathogens

The advent of new antibiotics has helped clinicians to control severe bacterial infections. Despite this, inappropriate and redundant use of antibiotics, inadequate diagnosis, and smart resistant mechanisms developed by pathogens sometimes lead to the failure of treatment strategies. The genotypic analysis of clinical samples revealed that the rapid spread of extended-spectrum β-lactamases (ESBLs) genes is one of the most common approaches acquired by bacterial pathogens to become resistant. The scenario compelled the researchers to prioritize the design and development of novel and effective therapeutic options. Nanotechnology has emerged as a plausible groundbreaking tool against resistant infectious pathogens. Numerous reports suggested that inorganic nanomaterials, specifically gold nanoparticles (AuNPs), have converted unresponsive antibiotics into potent ones against multi-drug resistant pathogenic strains. Interestingly, after almost two decades of exhaustive preclinical evaluations, AuNPs are gradually progressively moving ahead toward clinical evaluations. However, the mechanistic aspects of the antibacterial action of AuNPs remain an unsolved puzzle for the scientific fraternity. Thus, the review covers state-of-the-art investigations pertaining to the efficacy of AuNPs as a tool to overcome ESBLs acquired resistance, their applicability and toxicity perspectives, and the revelation of the most appropriate proposed mechanism of action. Conclusively, the trend suggested that antibiotic-loaded AuNPs could be developed into a promising interventional strategy to limit and overcome the concerns of antibiotic-resistance.

Nanomaterials for Molecular Detection and Analysis of Extracellular Vesicles

Extracellular vesicles (EVs) have emerged as a novel resource of biomarkers for cancer and certain other diseases. Probing EVs in body fluids has become of major interest in the past decade in the development of a new-generation liquid biopsy for cancer diagnosis and monitoring. However, sensitive and specific molecular detection and analysis are challenging, due to the small size of EVs, low amount of antigens on individual EVs, and the complex biofluid matrix. Nanomaterials have been widely used in the technological development of protein and nucleic acid-based EV detection and analysis, owing to the unique structure and functional properties of materials at the nanometer scale. In this review, we summarize various nanomaterial-based analytical technologies for molecular EV detection and analysis. We discuss these technologies based on the major types of nanomaterials, including plasmonic, fluorescent, magnetic, organic, carbon-based, and certain other nanostructures. For each type of nanomaterial, functional properties are briefly described, followed by the applications of the nanomaterials for EV biomarker detection, profiling, and analysis in terms of detection mechanisms.

Core-shell Au@ZIF-67-based pollutant monitoring of thiram and carbendazim pesticides

A sensitive and stable substrate plays a vital role in the Raman spectroscopic techniques as an analytical method for detecting pesticides effectively from the environment. Enhancing signals from nanoparticles are weak and inconsistent in repeatability since analytes tend to degrade quickly under laser exposure. Herein, a novel substrate of Au@ZIF-67 is prepared on octahedral AuNPs by trapping pesticide molecules with small three-dimensional volumes by the flexibility of ZIF-67 for rapid detection with high sensitivity and stability. The two types of thiram and carbendazim pesticides, which are environmental pollutants that affect biodiversity, were successfully absorbed in Au@ZIF-67 nanostructures by adsorption-desorption equilibrium for analytical purposes in Raman spectroscopy. Spectra calculations of the thiram and carbendazim molecules on 8 atoms of Au using DFT were compared with the experimental data. The SERS enhancement factors for thiram and carbendazim were estimated to be 1.91 × 10⁸ and 3.12 × 10⁸, respectively, with the LOD values of trace amounts of ∼10^-10 mol L^-1. The novel substrate of Au@ZIF-67 is a propitious platform for detecting thiram and carbendazim in trace amounts, providing a helpful strategy for detecting residues with high performance in the environment at the laboratory and practical scales.

Role of Tunable Gold Nanostructures in Cancer Nanotheranostics: Implications on Synthesis, Toxicity, Clinical Applications and Their Associated Opportunities and Challenges

The existing diagnosis and treatment modalities have major limitations related to their precision and capability to understand several stages of disease development. A superior therapeutic system consists of a multifunctional approach in early diagnosis of the disease with a simultaneous progressive cure, using a precise medical approach towards complex treatment. These challenges can be addressed via nanotheranostics and explore suitable approaches to improve health care. Nanotechnology in combination with theranostics as an unconventional platform paved the way for developing novel strategies and modalities leading to diagnosis and therapy for complex disease conditions, ranging from acute to chronic levels. Among the metal nanoparticles, gold nanoparticles are being widely used for theranostics due to their inherent non-toxic nature and plasmonic properties. The unique optical and chemical properties of plasmonic metal nanoparticles along with theranostics have led to a promising era of plausible early detection of disease conditions, and they enable real-time monitoring with enhanced non-invasive or minimally invasive imaging of several ailments. This review aims to highlight the improvement and advancement brought to nanotheranostics by gold nanoparticles in the past decade. The clinical use of the metal nanoparticles in nanotheranostics is explained, along with the future perspectives on addressing the key applications related to diagnostics and therapeutics, respectively. The scope of gold nanoparticles and their realistic potential to design a sophisticated theranostic system is discussed in detail, along with their implications in clinical advancements which are the needs of the hour. The review concluded with the challenges, opportunities, and implications on translational potential of using gold nanoparticles in nanotheranostics.