Temperature-responsive microgel films as reversible carbon dioxide absorbents in wet environment

Rational Designing Microenvironment of Gas-Diffusion Electrodes via Microgel-Augmented CO2 Availability for High-Rate and Selective CO2 Electroreduction to Ethylene

Efficient electrochemical CO2 reduction reaction (CO2RR) requires advanced gas-diffusion electrodes (GDEs) with tunned microenvironment to overcome low CO2 availability in the vicinity of catalyst layer. Herein, for the first time, pyridine-containing microgels-augmented CO2 availability is presented in Cu2O-based GDE for high-rate CO2 reduction to ethylene, owing to the presence of CO2-phil microgels with amine moieties. Microgels as three-dimensional polymer networks act as CO2 micro-reservoirs to engineer the GDE microenvironment and boost local CO2 availability. The superior ethylene production performance of the GDE modified by 4-vinyl pyridine microgels, as compared with the GDE with diethylaminoethyl methacrylate microgels, indicates the bifunctional effect of pyridine-based microgels to enhance CO2 availability, and electrocatalytic CO2 reduction. While the Faradaic efficiency (FE) of ethylene without microgels was capped at 43% at 300 mA cm-2, GDE with the pyridine microgels showed 56% FE of ethylene at 700 mA cm-2. A similar trend was observed in zero-gap design, and GDEs showed 58% FE of ethylene at -4.0 cell voltage (>350 mA cm-2 current density), resulting in over 2-fold improvement in ethylene production. This study showcases the use of CO2-phil microgels for a higher rate of CO2RR-to-C2+, opening an avenue for several other microgels for more selective and efficient CO2 electrolysis.

Polymerized stimuli-responsive microgel hybrids of silver nanoparticles as efficient reusable catalyst for reduction reaction

We have showcased the potential of polymerized hydrogels (PGMs) with uniform-sized stimuli-responsive microgel particles as promising alternatives to prevent aggregation in solution based nanoparticle systems. In the current work, we implemented the PGM concept by embedding anionic stimuli-responsive microgels (PNIPAM-co-AAc)-silver (Ag) hybrids within a hydrogel matrix. These PGM@AgNP hybrid materials are used as catalysts for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of sodium borohydride. UV-VIS spectroscopy is used for studying catalytic activity. In the solution based system, the complete reduction of 4-NP to 4-AP took 30 minutes with pure Ag nanoparticles, 24 minutes with PNIPAM-Ag hybrid (Neutral) microgels and 15 minutes with PNIPAM-co-AAc-Ag (Anionic) hybrid microgels. In contrast PGM containing PNIPAM-co-AAc-Ag hybrids achieved full reduction in just 15 minutes, along with a 3-minute induction period. For pure Ag nanoparticles, the first-order rate constant is found to be 0.25 min-1, for PNIPAM-Ag hybrid (Neutral), it is 0.21 min-1 and for PNIPAM-co-AAc-Ag (Anionic), it is 0.5 min-1 where as for PGM containing anionic microgel hybrids it is found to be 0.8 min-1. Furthermore, the reusability of the PGM-Ag (anionic) materials for catalytic activity remains unaltered even after several washings. In summary, our study highlights the effectiveness of PGM@AgNP materials as efficient catalysts for the reduction of 4-nitrophenol to 4-aminophenol, indicating their versatile potential in various catalytic applications.

Design Rationale for CO2 Separation Membranes with Micropatterned Surface Structures

Here, we report the design rationale of CO2 separation membranes with micropatterned surface structures. Thin film composite (TFC) membranes with micropatterned surface structures were fabricated by spray coating amine-containing hydrogel particles on the top of micropatterned porous support membranes, which were synthesized by a polymerization-induced phase separation process in a micromold (PIPsμM). The pore size of the support membranes was optimized by tuning the proportion of good and poor solvents for the polymerization process so that the microgels would be assembled as a defect-free separation layer. The relationship between the size of the micropatterned structures on the surface of the support membrane and the thickness of the separation layer was optimized to maximize the surface area of the separation layer. The rationally designed micropatterned TFC membrane showed a CO2 permeability (835.8 GPU) proportional to the increase in surface area relative to the flat membrane with a high CO2/N2 selectivity of 58.7. The rational design for micropatterned TFC membranes will enable the development of inexpensive and high-performance functional membranes not only for CO2 separation but also for other applications such as water treatment and membrane reactors.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Microgels based on 0D-3D carbon materials: Synthetic techniques, properties, applications, and challenges

Microgels are three-dimensional (3D) colloidal hydrogel particles with outstanding features such as biocompatibility, good mechanical properties, tunable sizes from submicrometer to tens of nanometers, and large surface areas. Because of these unique qualities, microgels have been widely used in various applications. Carbon-based materials (CMs) with various dimensions (0-3D) have recently been investigated as promising candidates for the design and fabrication of microgels because of their large surface area, excellent conductivity, unique chemical stability, and low cost. Here, we provide a critical review of the specific characteristics of CMs that are being incorporated into microgels, as well as the state-of-the art applications of CM-microgels in pollutant adsorption and photodegradation, H₂ evoluation, CO₂ capture, soil conditioners, water retention, drug delivery, cell encapsulation, and tissue engineering. Advanced preparation techniques for CM-microgel systems are also summarized and discussed. Finally, challenges related to the low colloidal stability of CM-microgels and development strategies are examined. This review shows that CM-microgels have the potential to be widely used in various practical applications.

Link between Morphology, Structure, and Interactions of Composite Microgels

We combine small-angle scattering experiments and simulations to investigate the internal structure and interactions of composite poly(N-isopropylacrylamide)-poly(ethylene glycol) (PNIPAM-PEG) microgels. At low temperatures the experimentally determined form factors and the simulated density profiles indicate a loose internal particle structure with an extended corona that can be modeled as a starlike object. With increasing temperature across the volumetric phase transition, the form factor develops an inflection that, using simulations, is interpreted as arising from a conformation in which PEG chains are incorporated in the interior of the PNIPAM network. This gives rise to a peculiar density profile characterized by two dense, separated regions, at odds with configurations in which the PEG chains reside on the surface of the PNIPAM core. The conformation of the PEG chains also have profound effects on the interparticle interactions: Although chains on the surface reduce the solvophobic attraction typically experienced by PNIPAM particles at high temperatures, PEG chains inside the PNIPAM network shift the onset of attractive interaction at even lower temperatures. Our results show that by tuning the morphology of the composite microgels, we can qualitatively change both their structure and their mutual interactions, opening the way to explore new collective behaviors of these objects.

Assembly of Defect-Free Microgel Nanomembranes for CO2 Separation

The development of robust and thin CO₂ separation membranes that allow fast and selective permeation of CO₂ will be crucial for rebalancing the global carbon cycle. Hydrogels are attractive membrane materials because of their tunable chemical properties and exceptionally high diffusion coefficients for solutes. However, their fragility prevents the fabrication of thin defect-free membranes suitable for gas separation. Here, we report the assembly of defect-free hydrogel nanomembranes for CO₂ separation. Such membranes can be prepared by coating an aqueous suspension of colloidal hydrogel microparticles (microgels) onto a flat, rough, or micropatterned porous support as long as the pores are hydrophilic and the pore size is smaller than the diameter of the microgels. The deformability of the microgel particles enables the autonomous assembly of defect-free 30-50 nm-thick membrane layers from deformed ∼15 nm-thick discoidal particles. Microscopic analysis established that the penetration of water into the pores driven by capillary force assists the assembly of a defect-free dense hydrogel layer on the pores. Although the dried films did not show significant CO₂ permeance even in the presence of amine groups, the permeance dramatically increased when the membranes are adequately hydrated to form a hydrogel. This result indicated the importance of free water in the membranes to achieve fast diffusion of bicarbonate ions. The hydrogel nanomembranes consisting of amine-containing microgel particles show selective CO₂ permeation (850 GPU, α_CO2/N2 = 25) against post-combustion gases. Acid-containing microgel membranes doped with amines show highly selective CO₂ permeation against post-combustion gases (1010 GPU, α_CO2/N2 = 216) and direct air capture (1270 GPU, α_CO2/N2 = 2380). The membrane formation mechanism reported in this paper will provide insights into the self-assembly of soft matters. Furthermore, the versatile strategy of fabricating hydrogel nanomembranes by the autonomous assembly of deformable microgels will enable the large-scale manufacturing of high-performance separation membranes, allowing low-cost carbon capture from post-combustion gases and atmospheric air.

Triply-responsive OEG-based microgels and hydrogels: regulation of swelling ratio, volume phase transition temperatures and mechanical properties

Facile methods to coordinate swelling ratio, volume-phase transition temperatures and mechanical properties for pH-, thermal-, and cationic-responsive microgels and hydrogels.

Pathways and challenges towards a complete characterization of microgels

Due to their controlled size, sensitivity to external stimuli, and ease-of-use, microgel colloids are unique building blocks for soft materials made by crosslinking polymers on the micrometer scale. Despite the plethora of work published, many questions about their internal structure, interactions, and phase behavior are still open. The reasons for this lack of understanding are the challenges arising from the small size of the microgel particles, complex pairwise interactions, and their solvent permeability. Here we describe pathways toward a complete understanding of microgel colloids based on recent experimental advances in nanoscale characterization, such as super-resolution microscopy, scattering methods, and modeling.

Smart microgel-metal hybrid particles of PNIPAM-co-PAA@AgAu: synthesis, characterizations and modulated catalytic activity

Smart pH and thermoresponsive, poly(N-isopropyl acrylamide co acrylic acid) (PNIPAM-co-PAA) microgel particles are used as microreactors to prepare hybrids of gold (Au) and silver (Ag) nanoparticles (PNIPAM-co-PAA@AgAu) using a facile two steps in situ approach. These hybrid particles are characterized using the transmission electron microscope (TEM), UV-VIS spectrometer, and dynamic light scattering (DLS). TEM directly confirms the successful loading of metal nanoparticles onto microgels and the hybrid particles have a narrow size distribution. UV-VIS spectroscopy at different concentration ratios of silver/gold chloride strongly reveals the presence of plasmon peaks of both silver and gold between 10% to 25% of gold chloride concentration. DLS studies demonstrate that these hybrid microgels exhibit both pH and thermoresponsive properties comparatively with a lesser swelling than the pure microgels without loaded nanoparticles. Further, the catalytic activities of PNIPAM-co-PAA@AgAu hybrids are studied through a reduction of 4-nitrophenol (4-NP)-to-4-aminophenol (4-AP) in the presence of sodium borohydride at different pH. Interestingly, these hybrid particles exhibit modulating catalytic activity with variation in pH. The reduction kinetics decreases with increasing pH and the corresponding apparent rate constant exhibits two linear regimes with one at pH below pK_a and another at pH above pK_a of acrylic acid. This pH-modulated catalytic behavior of PNIPAM-co-PAA@AgAu hybrids is discussed based on pH-induced swelling/deswelling transition, the core-shell nature of microgel particles, and its intrinsic interplay with the diffusion of nitrophenols within the microgel network. Finally, our results are compared and discussed in the context of previously studied catalytic activities in different polymer-metal hybrids.

Effect of Charge Groups Immobilized in Hydrogel Microspheres during the Evaporation of Aqueous Sessile Droplets

In contrast to conventional dispersions of solid microspheres, dilute dispersions containing soft hydrogel microspheres (microgels) exhibit unique drying behavior due to their selective adsorption at the air/water interface of sessile droplets. So far, the impact of the size, chemical composition, and softness (degree of cross-linking) of microgels has been investigated. In the present study, we present the impact of charged groups introduced in the microgels on the adsorption and assembly behavior of these microgels at the air/water interface using a series of microgels with different amounts and distribution of charged groups. A series of experiments under different conditions (pH value and ionic strength) afforded information that clarified the adsorption, interpenetration, and deformation behavior of such charged microgels at the air/water interface. The results indicate that the adsorption and the deformation of charged microgels at the air/water interface are suppressed by the presence of charged groups. Moreover, charged microgels adsorbed at the interface are more dynamic and not highly entangled with each other; i.e., even though the more dynamic charged microgels are arranged at the interface, these arranged structures are disrupted upon transferring onto the solid substrates. Our findings of this study can be expected to promote the further development of applications, e.g., foams and emulsions stabilized by microgels, that crucially requires an in-depth understanding of the adsorption behavior of charged microgels at the air/water interface such as coatings.

Giant Microgels with CO2-Induced On-Off, Selective, and Recyclable Adsorption for Anionic Dyes

Adsorbents that are capable of controllable pollutants adsorption and release without secondary pollution are attractive in water treatment. Here, we propose eco-friendly CO₂ as a trigger to switch the charge states and collapse-expansion transition of giant microgels consisting of hydrophilic acrylamide and hydrophobic 2-(diethylamino)ethyl methacrylate and demonstrated the on-off, selective, and recyclable adsorption of anionic dyes on microgels under CO₂ stimulation. Apart from easy-handling separation from the water by a simple filtration process, the maximum adsorption capacity is as high as 821 mg g^-1, and the adsorption isotherms and kinetics obeyed Langmuir isotherm and the pseudo-second-order kinetics models, respectively. The anionic dye can also be separated from the mixture solution using CO₂-treated microgels. Moreover, a wastewater treatment prototype with microgel-packed column was fabricated. Under continuous flow condition, the dye was removed and recovered by alternative bubbling CO₂ and flushing with aqueous alkali (pH 12). Thus, this type of microgels with CO₂-induced protonation-deprotonation transition can serve as a cost-effective, environmentally friendly, and efficient adsorbent for water purification applications.

Reversible p Ka Modulation of Carboxylic Acids in Temperature-Responsive Nanoparticles through Imprinted Electrostatic Interactions

The acid dissociation constants (p K_a values) of Brønsted acids at the active sites of proteins are reversibly modulated by intramolecular electrostatic interactions with neighboring ions in a reaction cycle. The resulting p K_a shift is crucial for the proteins to capture, transfer, and release target ions. On the other hand, reversible p K_a modulation through electrostatic interactions in synthetic polymer materials has seldom been realized because the interactions are strongly shielded by solvation water molecules in aqueous media. Here, we prepared hydrogel nanoparticles (NPs) bearing carboxylic acid groups whose p K_a values can be reversibly modulated by electrostatic interactions with counterions in the particles. We found that the deprotonated states of the acids were stabilized by electrostatic interactions with countercations only when the acids and cations were both imprinted in hydrophobic microdomains in the NPs during polymerization. Cationic monomers, like primary amine- and guanidium group-containing monomers, which interacted strongly with growing NPs showed greater p K_a modulation than monomers that did not interact with the NPs, such as quaternary ammonium group-containing monomers. Modulation was enhanced when the guanidium moieties were protected with hydrophobic groups during polymerization, so that the guanidium ions were imprinted in the hydrophobic microdomains; the lowest p K_a of ∼4.0 was achieved as a result. The p K_a modulation of the acids could be reversibly removed by inducing a temperature-dependent volume phase transition of the gel NPs. These design principles are applicable to other stimuli-responsive materials and integral to the development of synthetic materials that can be used to capture, transport, and separate target ions.

Synthesis and characterization of CO2-sensitive temperature-responsive catalytic poly(ionic liquid) microgels

A class of poly(ionic liquid) microgels exhibiting CO₂-switchable temperature-responsive volume phase transition behavior have been synthesized and used for CO₂ fixation.

Wide-range pKa tuning of proton imprinted nanoparticles for reversible protonation of target molecules via thermal stimuli

pK_a tuning of Brønsted acids in synthetic nano-materials is of great importance for the design of ion exchange and bio-/molecular-separation media and polymer catalysis.

CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications

CO2 is an ideal trigger for switchable or stimuli-responsive materials because it is benign, inexpensive, green, abundant, and does not accumulate in the system. Many different CO2-responsive materials including polymers, latexes, solvents, solutes, gels, surfactants, and catalysts have been prepared. This review focuses on the preparation, self-assembly, and functional applications of CO2-responsive polymers. Detailed discussion is provided on the synthesis of CO2-responsive polymers, in particular using reversible deactivation radical polymerization (RDRP), formerly known as controlled/living radical polymerization (CLRP), a powerful technique for the preparation of well-defined (co)polymers with precise control over molecular weight distribution, chain-end functional groups, and polymer architectural design. Self-assembly in aqueous dispersed media is highlighted as well as emerging potential applications.

CaO nanocrystals grown over SiO2 microtubes for efficient CO2 capture: organogel sets the platform

Materials that can capture and store CO₂ are important. Though CaO is a cheap sorbent, it is inefficient for practical purposes due to sintering and poor diffusion of CO₂ through the surface-CaCO₃ layer. We have developed a high performance, sintering-resistant CaO-based sorbent by uniformly nanofabricating the CaO nanocrystals on SiO₂ microtubes made by organogel templated polymerization.

Design rationale of thermally responsive microgel particle films that reversibly absorb large amounts of CO2: fine tuning the pKa of ammonium ions in the particles

Fine-tuning of pK_a value of ammonium ions at both CO₂ capture and release temperature is found to be crucial for the design of the thermally responsive gel particle films that reversibly capture large amounts of CO₂.

Herein we revealed the design rationale of thermally responsive gel particle (GP) films that reversibly capture and release large amounts of CO₂ over a narrow temperature range (30–75 °C). The pK_a value of ammonium ions in the GPs at both the CO₂ capture temperature (30 °C) and release temperature (75 °C) is found to be the primary factor responsible for the stoichiometry of reversible CO₂ capture by the amines in the GP films. The pK_a values can be tuned by the properties of GPs such as volume phase transition temperature (VPTT), size, swelling ratio, and the imprinted microenvironment surrounding the amines. The optimal GP obtained according to the design rationale showed high capture capacity (68 mL CO₂ per g dry GPs, 3.0 mmol CO₂ per g dry GPs), although the regeneration temperature was as low as 75 °C. We anticipate that GP films that reversibly capture other acidic and basic gases in large amounts can also be achieved by the pK_a tuning procedures.

Highly Sensitive CO₂-Responsive Polymeric Microgels That Respond Within Seconds

In this work, polymeric microgels with swift response to CO2 are synthesized by polymerization of tertiary-amine containing methacrylate monomers (N,N-diethylaminoethyl methacrylate, DEAEMA) and polyethylene glycol monomethyl ether acrylate (PEGMA) as stabilizers. The obtained microgels are stable but very sensitive to CO2, which can rapidly swell and further collapse within 5 s upon bubbling of CO2, or within minutes in an atmosphere of gaseous CO2. The protonation of the tertiary amine groups in the presence of CO2 induces sensitive swelling and further irreversible collapse of the microgels due to the internal charge repulsion and relatively low cross-linking density in the core area of microgels. This rapid response to CO2 may find further applications in the fields of sensitive detection or responsive loading and release upon CO2 stimulus.

In situ cross-linking of stimuli-responsive hemicellulose microgels during spray drying

Chemical cross-linking during spray drying offers the potential for green fabrication of microgels with a rapid stimuli response and good blood compatibility and provides a platform for stimuli-responsive hemicellulose microgels (SRHMGs). The cross-linking reaction occurs rapidly in situ at elevated temperature during spray drying, enabling the production of microgels in a large scale within a few minutes. The SRHMGs with an average size range of ∼ 1-4 μm contain O-acetyl-galactoglucomannan as a matrix and poly(acrylic acid), aniline pentamer (AP), and iron as functional additives, which are responsive to external changes in pH, electrochemical stimuli, magnetic field, or dual-stimuli. The surface morphologies, chemical compositions, charge, pH, and mechanical properties of these smart microgels were evaluated using scanning electron microscopy, IR, zeta potential measurements, pH evaluation, and quantitative nanomechanical mapping, respectively. Different oxidation states were observed when AP was introduced, as confirmed by UV spectroscopy and cyclic voltammetry. Systematic blood compatibility evaluations revealed that the SRHMGs have good blood compatibility. This bottom-up strategy to synthesize SRHMGs enables a new route to the production of smart microgels for biomedical applications.

Temperature and CO2 responsive polyethylenimine for highly efficient carbon dioxide release

Temperature and CO₂ responsive behaviour and highly efficient carbon dioxide release was achieved via acylation of commercial available polyethylenimine.