Introduction of an ionic liquid into the micropores of a metal-organic framework and its anomalous phase behavior

Strategies to improve the ionic conductivity of quasi-solid-state electrolytes based on metal-organic frameworks

The low ionic conductivity of quasi-solid-state electrolytes (QSSEs) at ambient temperature is a barrier to the development of solid-state batteries (SSBs). Conversely, metal-organic frameworks (MOFs) with porous structure and metal sites show great potential for the fabrication of QSSEs. Numerous studies have proven that the structure and functional groups of MOFs could significantly impact the ionic conductivity of QSSEs based on MOFs (MOFs-QSSEs). This review introduces the transport mechanism of lithium ions in various MOFs-QSSEs, and then analyses how to construct an effective and consistent lithium ions pathway from the perspective of MOFs modification. It is shown that the ion conductivity could be enhanced by modifying the morphology and functional groups, as well as applying amorphous MOFs. Lastly, some issues and future perspectives for MOFs-QSSEs are examined. The primary objective of this review is to enhance the comprehension of the mechanisms and performance optimization methods of MOFs-QSSEs. Consequently, this would guide the design and synthesis of QSSEs with high ionic conductivity, and ultimately enhance the performance of commercial SSBs.

Recent progress and perspectives on metal-organic frameworks as solid-state electrolytes for lithium batteries

Solid-state electrolytes (SSEs) are the key materials in the new generation of all-solid-state lithium ion/metal batteries. Metal-organic frameworks (MOFs) are ideal materials for developing solid electrolytes because of their structural diversity and porous properties. However, there are several significant issues and obstacles involved, such as lower ion conductivity, a smaller ion transport number, a narrower electrochemical stability window and poor interface contact. In this review, a comprehensive analysis and summary of the unique ion-conducting behavior of MOF-based electrolytes in rechargeable batteries are presented, and the different design principles of MOF-based SSEs are classified and emphasized. Accordingly, four design principles for achieving these MOF-based SSEs are presented and the influence of SSEs combined with MOFs on the electrochemical performance of the batteries is described. Finally, the challenges in the application of MOF materials in lithium ion/metal batteries are explored, and directions for future research on MOF-based electrolytes are proposed. This review will deepen the understanding of MOF-based electrolytes and promote the development of high-performance solid-state lithium ion/metal batteries. This review not only provides theoretical guidance for research on new MOF-based SSE systems, but also contributes to further development of MOFs applied to rechargeable batteries.

Mechanisms of the Accelerated Li+ Conduction in MOF-Based Solid-State Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Solid polymer electrolytes (SPEs) for lithium metal batteries have garnered considerable interests owing to their low cost, flexibility, lightweight, and favorable interfacial compatibility with battery electrodes. Their soft mechanical nature compared to solid inorganic electrolytes give them a large advantage to be used in low pressure solid-state lithium metal batteries, which can avoid the cost and weight of the pressure cages. However, the application of SPEs is hindered by their relatively low ionic conductivity. In addressing this limitation, enormous efforts are devoted to the experimental investigation and theoretical calculations/simulation of new polymer classes. Recently, metal-organic frameworks (MOFs) have been shown to be effective in enhancing ion transport in SPEs. However, the mechanisms in enhancing Li+ conductivity have rarely been systematically and comprehensively analyzed. Therefore, this review provides an in-depth summary of the mechanisms of MOF-enhanced Li+ transport in MOF-based solid polymer electrolytes (MSPEs) in terms of polymer, MOF, MOF/polymer interface, and solid electrolyte interface aspects, respectively. Moreover, the understanding of Li+ conduction mechanisms through employing advanced characterization tools, theoretical calculations, and simulations are also reviewed in this review. Finally, the main challenges in developing MSPEs are deeply analyzed and the corresponding future research directions are also proposed.

Liquid-Liquid Phase Separation of Aqueous Ionic Liquids in Covalent Organic Frameworks for Thermal Switchable Proton Conductivity

Covalent organic frameworks (COFs) have regular channels that can accommodate guest molecules to provide highly conductive solid electrolytes. However, designing smart, conductive COFs remains a great challenge. Herein, we report the first example of PEG-functionalized ionic liquids (ILs) anchored on the COF walls by strong hydrogen bonding to fabricate thermally responsive COFs (ILm@COF). We found that similar to the traditional IL/water mixture, the ILs undergo lower critical solution temperature (LCST)-type phase behavior within COF nanopores under high moisture levels. However, the phase separation temperature of aqueous IL decreases in COF channels due to the strong interaction between the IL and COF. Thus, the proton conductivity of ILm@COF can be reversibly switched by phase miscibility and separation in COF nanopores, and there is no obvious decrease even after 20 switching cycles. Our work provides important clues for understanding liquid-liquid phase separation in a confined nanospace and opens a new pathway to switchable proton conductivity.

Confinement-enhanced Li+ ion dynamics in an ionic liquid-based electrolyte in porous material

While Ionic Liquids (IL) are promising liquid electrolyte components for Li-ion batteries due to their high electrochemical stability and low volatility and flammability, unfavorable Lithium-anion clusters lead to poor Li+ transport properties such as low transference numbers. A confinement of ILs in nanoporous materials could overcome these problems, based on altered structural and dynamic properties of the confined ILs. We investigate the coordination and the Li+ dynamics in an IL/Li-salt mixture of 1-butyl-1-methylpyrrolidinium bis(trifluormethyl-sulfonyl)imide (Pyr14TFSA) and LiTFSA and reveal in how far the confinement has positive or negative effects on ion clustering in the electrolyte. To this end, the electrolyte is confined in mesoporous silica SBA-15 (pore diameter 8 nm or 4 nm) or the metal-organic framework (MOF) ZIF-8 (pore diameter 1.16 nm). Raman spectra elucidate the Li-anion coordination and the interaction of the ions with the walls. Temperature-dependent 7Li spin relaxation rates, analyzed within the model of Bloembergen, Purcell and Pound (BPP), allow statements on the local Li+ environment, the local Li+ dynamics and its activation. In the SBA-15 materials the Li+ coordination is unchanged with persisting Li-TFSA clusters. Furthermore, the local dynamics of Li+ is reduced upon confinement, as expected due to geometrical restrictions. At the same time, however, both structural and dynamic parameters do not show a pronounced dependence on the pore size. Surprisingly, upon confinement in ZIF-8 Li+ displays faster local dynamics and a more asymmetric environment in comparison to the bulk electrolyte. The enhanced dynamics is accompanied by a reduced coordination to TFSA-, suggesting the breakup of Li-TFSA clusters. Differences between the porous materials are attributed to the nature of the wall surface, as Raman spectra suggest that in SBA-15 the TFSA- ion is preferentially interacting with the pore walls, whereas in ZIF-8 the Pyr14+ ion is immobilized by the pore walls. These results demonstrate a strong influence of internal interfaces on IL structure and dynamics and bear potential for further tailoring ion dynamics.

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Exploring ionic liquid-laden metal-organic framework composite materials as hybrid electrolytes in metal (ion) batteries

This review focuses on the combination of metal-organic frameworks (MOFs) and ionic liquids (ILs) to obtain composite materials to be used as solid electrolytes in metal-ion battery applications. Benefiting from the controllable chemical composition, tunable pore structure and surface functionality, MOFs offer great opportunities for synthesizing high-performance electrolytes. Moreover, the encapsulation of ILs into porous materials can provide environmentally benign solid-state electrolytes for electrochemical devices. Due to the versatility of MOF-based materials, in this review we also explore their use as anodes and cathodes in Li- and Na-ion batteries. Finally, solid IL@MOF electrolytes and their implementation into Li and Na batteries have been analyzed, as well as the design and advanced manufacturing of solid IL@MOF electrolytes embedded on polymeric matrices.

Solitary Medium of a Multifunctional Ionic Liquid for Crystallizing Hierarchically Porous Metal-Organic Frameworks

Hierarchically porous metal-organic frameworks (HP-MOFs), dominating both the micro- and mesoporous regimes, show high potentials in various applications especially those involving bulky biomolecules. The templating method has been proven to be effective in the fabrication of HP-MOFs; however, complicated synthetic systems containing solvents, templates, and additives are frequently employed. Here we report the first example of designing a poly(ethylene glycol)-based alkylammonium and bromide multifunctional ionic liquid (IL) as a solitary medium to construct HP-MOFs, avoiding the involvement of any additional media. Besides the ready solubilization of MOF precursors in the multifunctional IL due to a poly(ethylene glycol) chain as the solubilizer, the ionic moiety facilitates electrostatic interaction to create a templating effect. Hence, UiO-66 with hierarchical porosity has been successfully fabricated, and such a methodology can also be applied to the construction of other HP-MOFs. The resultant HP-UiO-66 is efficient in the encapsulation of bulky biomolecule cytochrome c, and the adsorption capacity is obviously superior to that of the microporous counterpart.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Ionic Liquid@Metal-Organic Framework as a Solid Electrolyte in a Lithium-Ion Battery: Current Performance and Perspective at Molecular Level

Searching for a suitable electrolyte in a lithium-ion battery is a challenging task. The electrolyte must not only be chemically and mechanically stable, but also be able to transport lithium ions efficiently. Ionic liquid incorporated into a metal-organic framework (IL@MOF) has currently emerged as an interesting class of hybrid material that could offer excellent electrochemical properties. However, the understanding of the mechanism and factors that govern its fast ionic conduction is crucial as well. In this review, the characteristics and potential use of IL@MOF as an electrolyte in a lithium-ion battery are highlighted. The importance of computational methods is emphasized as a comprehensive tool to investigate the atomistic behavior of IL@MOF and its interaction in electrochemical environments.

Stable Quasi-Solid-State Aluminum Batteries

Nonaqueous rechargeable aluminum batteries (RABs) of low cost and high safety are promising for next-generation energy storage. With the presence of ionic liquid (IL) electrolytes, their high moisture sensitivity and poor stability would lead to critical issues in liquid RABs, including undesirable gas production, irreversible activity loss, and an unstable electrode interface, undermining the operation stability. To address such issues, herein, a stable quasi-solid-state electrolyte is developed via encapsulating a small amount of an IL into a metal-organic framework, which not only protects the IL from moisture, but creates sufficient ionic transport network between the active materials and the electrolyte. Owing to the generated stable states at both positive-electrode-electrolyte and negative-electrode-electrolyte interfaces, the as-assembled quasi-solid-state Al-graphite batteries deliver specific capacity of ≈75 mA h g^-1 (with positive electrode material loading ≈9 mg cm^-2 , much higher than that in the conventional liquid systems). The batteries present a long-term cycling stability beyond 2000 cycles, with great stability even upon exposure to air within 2 h and under flame combustion tests. Such technology opens a new platform of designing highly safe rechargeable Al batteries for stable energy storage.

Impact of Ionic Liquid Structure and Loading on Gas Sorption and Permeation for ZIF-8-Based Composites and Mixed Matrix Membranes

Carbon dioxide (CO2) capture has become of great importance for industrial processes due to the adverse environmental effects of gas emissions. Mixed matrix membranes (MMMs) have been studied as an alternative to traditional technologies, especially due to their potential to overcome the practical limitations of conventional polymeric and inorganic membranes. In this work, the effect of using different ionic liquids (ILs) with the stable metal-organic framework (MOF) ZIF-8 was evaluated. Several IL@ZIF-8 composites and IL@ZIF-8 MMMs were prepared to improve the selective CO2 sorption and permeation over other gases such as methane (CH4) and nitrogen (N2). Different ILs and two distinct loadings were prepared to study not only the effect of IL concentration, but also the impact of the IL structure and affinity towards a specific gas mixture separation. Single gas sorption studies showed an improvement in CO2/CH4 and CO2/N2 selectivities, compared with the ones for the pristine ZIF-8, increasing with IL loading. In addition, the prepared IL@ZIF-8 MMMs showed improved CO2 selective behavior and mechanical strength with respect to ZIF-8 MMMs, with a strong dependence on the intrinsic IL CO2 selectivity. Therefore, the selection of high affinity ILs can lead to the improvement of CO2 selective separation for IL@ZIF-8 MMMs.

N-Heterocyclic carbenes and their precursors in functionalised porous materials

Though N-heterocyclic carbenes (NHCs) have emerged as diverse and powerful discrete functional molecules in pharmaceutics, nanotechnology, and catalysis over decades, the heterogenization of NHCs and their precursors for broader applications in porous materials, like metal-organic frameworks (MOFs), porous coordination polymers (PCPs), covalent-organic frameworks (COFs), porous organic polymers (POPs), and porous organometallic cages (POMCs) was not extensively studied until the last ten years. By de novo or post-synthetic modification (PSM) methods, myriads of NHCs and their precursors containing building blocks were designed and integrated into MOFs, PCPs, COFs, POPs and POMCs to form various structures and porosities. Functionalisation with NHCs and their precursors significantly expands the scope of the potential applications of porous materials by tuning the pore surface chemical/physical properties, providing active sites for binding guest molecules and substrates and realizing recyclability. In this review, we summarise and discuss the recent progress on the synthetic methods, structural features, and promising applications of NHCs and their precursors in functionalised porous materials. At the end, a brief perspective on the encouraging future prospects and challenges in this contemporary field is presented. This review will serve as a guide for researchers to design and synthesize more novel porous materials functionalised with NHCs and their precursors.

MOFs in the time domain

Many of the proposed applications of metal-organic framework (MOF) materials may fail to materialize if the community does not fully address the difficult fundamental work needed to map out the 'time gap' in the literature - that is, the lack of investigation into the time-dependent behaviours of MOFs as opposed to equilibrium or steady-state properties. Although there are a range of excellent investigations into MOF dynamics and time-dependent phenomena, these works represent only a tiny fraction of the vast number of MOF studies. This Review provides an overview of current research into the temporal evolution of MOF structures and properties by analysing the time-resolved experimental techniques that can be used to monitor such behaviours. We focus on innovative techniques, while also discussing older methods often used in other chemical systems. Four areas are examined: MOF formation, guest motion, electron motion and framework motion. In each area, we highlight the disparity between the relatively small amount of (published) research on key time-dependent phenomena and the enormous scope for acquiring the wider and deeper understanding that is essential for the future of the field.

Robust ionic liquid@MOF composite as a versatile superprotonic conductor

A highly performing proton conducting composite was prepared through the impregnation of EMIMCl ionic liquid in the mesoporous MIL-101(Cr)-SO₃H MOF. The resulting EMIMCl@MIL-101(Cr)-SO₃H composite displays high thermal and chemical stability, alongside retention of a high amount of EMIMCl even at temperatures as high as 500 K, as well as under moisture conditions. Remarkably, this composite exhibits outstanding proton conductivity not only at the anhydrous state (σ_{473 K} = 1.5 × 10^-3 S cm^-S) but also under humidity (σ_{(343 K/60%-80%RH)} ≥ 0.10 S cm^-1) conditions. This makes EMIMCl@MIL-101(Cr)-SO₃H a unique candidate to act as a solid state proton conductor for PEMFC applications under versatile conditions.

HKUST-1@IL-Li Solid-state Electrolyte with 3D Ionic Channels and Enhanced Fast Li+ Transport for Lithium Metal Batteries at High Temperature

The challenge of safety problems in lithium batteries caused by conventional electrolytes at high temperatures is addressed in this study. A novel solid electrolyte (HKUST-1@IL-Li) was fabricated by immobilizing ionic liquid ([EMIM][TFSI]) in the nanopores of a HKUST-1 metal–organic framework. 3D angstrom-level ionic channels of the metal–organic framework (MOF) host were used to restrict electrolyte anions and acted as “highways” for fast Li⁺ transport. In addition, lower interfacial resistance between HKUST-1@IL-Li and electrodes was achieved by a wetted contact through open tunnels at the atomic scale. Excellent high thermal stability up to 300 °C and electrochemical properties are observed, including ionic conductivities and Li⁺ transference numbers of 0.68 × 10⁻⁴ S·cm⁻¹ and 0.46, respectively, at 25 °C, and 6.85 × 10⁻⁴ S·cm⁻¹ and 0.68, respectively, at 100 °C. A stable Li metal plating/stripping process was observed at 100 °C, suggesting an effectively suppressed growth of Li dendrites. The as-fabricated LiFePO₄/HKUST-1@IL-Li/Li solid-state battery exhibits remarkable performance at high temperature with an initial discharge capacity of 144 mAh·g⁻¹ at 0.5 C and a high capacity retention of 92% after 100 cycles. Thus, the solid electrolyte in this study demonstrates promising applicability in lithium metal batteries with high performance under extreme thermal environmental conditions.

Design of thiol–lithium ion interaction in metal–organic framework for high-performance quasi-solid lithium metal batteries

A metal–organic framework (Zr–MA) was designed to serve as high-performance solid electrolyte in quasi-solid lithium metal batteries. Both the high-density thiol groups and narrow channels in framework contributed to the improved ion transport.

Nanoconfinement effects on structural anomalies in imidazolium ionic liquids

Imidazolium Ionic Liquids (ILs) have been found to exhibit unusual nanostructuring behavior below their glass transition temperatures (Tg), which is ascribed to rearrangements in nonpolar domains formed by segregated alkyl chains. However, the dimensions required for such highly cooperative bulk phenomena are still unknown. In this work, we for the first time, investigate the effect of nanoconfinement on structural anomalies in imidazolium ILs. For this purpose, a series of ILs were embedded into the cavities of metal-organic framework (MOF) ZIF-8 and investigated using spin probes and Electron Paramagnetic Resonance (EPR) spectroscopy. The unusual nanostructuring near Tg, previously known for bulk ILs, was also observed for such nanoconfined ILs, and the amplitude of the anomaly was found to be dependent on the structure of the IL, thus showing the effects of molecular packing inside the MOF cavity. The first observation of structural anomalies in nanoconfined ILs opens perspectives for designing smart materials exhibiting these phenomena, and engaging MOFs as platforms creates the basis for potential applications of such functionalities.

Molecular simulation on the stability and adsorption properties of choline-based ionic liquids/IRMOF-1 hybrid composite for selective H2S/CO2 capture

The compatibility and performance of an Isoreticular Metal-Organic Frameworks (IRMOF-1) impregnated with choline-based ionic liquids (ILs) for selective adsorption of H₂S/CO₂, were studied by molecular dynamics (MD) simulation. Cholinium alanate ([Chl][Ala]) was nominated as the suitable IL for impregnation into IRMOF-1, consistent with the low RMSD values (0.546 nm, 0.670 nm, 0.776 nm) at three IL/IRMOF-1 w/w ratios (W_IL/IRMOF-1 = 0.4, 0.8, and 1.2). The [Chl]⁺ and [Ala]^- ion pair was located preferentially around the carboxylate group within the IRMOF-1 framework, with the latter interacting strongly with the host than the [Chl]⁺. Results of radius of gyration (Rg) and root mean square displacement (RMSD) revealed that a ratio of 0.4 w/w of IL/IRMOF-1 (Rg = 1.405 nm; RMSD = 0.546 nm) gave the best conformation to afford an exceptionally stable IL/IRMOF-1 composite. It was discovered that the IL/IRMOF-1 composite was more effective in capturing H₂S and CO₂ compared to pristine IRMOF-1. The gases adsorbed in higher quantities in the IL/IRMOF-1 composite phase compared to the bulk phase, with a preferential adsorption for H₂S, as shown by the uppermost values of adsorption ( [Formula: see text] = 17.954 mol L^-1 bar^-1) and an adsorption selectivity ( [Formula: see text] = 43.159) at 35 IL loading.

Heterogeneous Catalysis with the Participation of Ionic Liquids

This mini-review briefly describes the recent progress in the design and development of catalysts based on the presence of ionic liquids. In particular, the focus was on heterogeneous systems (supported ionic liquid (IL) phase catalysts (SILPC), solid catalysts with ILs (SCILL), porous liquids), which due to the low amounts of ionic liquids needed for their production, eliminate basic problems observed in the case of the employment of ionic liquids in homogeneous systems, such as high price, high viscosity, and efficient isolation from post-reaction mixtures.

Covalent Organic Frameworks: Emerging Organic Solid Materials for Energy and Electrochemical Applications

Covalent organic frameworks (COFs), materials constructed from organic building blocks joined by robust covalent bonds, have emerged as attractive materials in the context of electrochemical applications because of their high, intrinsic porosities and crystalline frameworks, as well as their ability to be tuned across two- and three-dimensions by the judicious selection of building blocks. Because of the recent and rapid development of this field, we have summarized COFs employed for electrochemical applications, such as batteries and capacitors, water splitting, solar cells, and sensors, with an emphasis on the structural design and resulting performance of the targeted electrochemical system. Overall, we anticipate this review will stimulate the design and synthesis of the next generation of COFs for use in electrochemical applications and beyond.

Rational Design of Ion Transport Paths at the Interface of Metal-Organic Framework Modified Solid Electrolyte

Solid-state lithium batteries have attracted great attention owing to their potential advantages in safety and energy density. Among various solid electrolytes, solid polymer electrolyte is promising due to its good viscoelasticity, lightweight, and low-cost processing. However, key issues of solid polymer electrolyte include poor ionic conductivity and low Li⁺ transference number, which limit its practical application. Herein, a new-type of ultraviolet cross-linked composite solid electrolyte (C-CSE), composed of ZIF-based ionic conductor (named ZIL) and polymer, is designed with enhanced ion transport. The ZIL is composed of ZIF-8 and ionic liquid, which can provide C-CSE with fast ion transport paths. Moreover, the proper pore size of ZIF-8 can restrict the migration of embedded ionic liquid and thus construct a solid-liquid transport interface between polymer chains and ZIF-8, which could achieve fast ion transport. In addition, ultraviolet irradiation can decrease the crystallization of C-CSE and thus increase the amorphous region. Consequently, the C-CSE show excellent electrochemical performance including high ionic conductivity of 0.426 mS cm^-1 at 30 °C, high Li⁺ transference number of 0.67, and good Li|Li compatibility cycle over 1040 h. Experimental and computational results indicate that diffusion energy barrier of Li⁺ through ZIF-8 is smaller than that of polymer chains, which reveals a new Li⁺ transport mechanism between polymer chains and ZIL, from "chain-chain-chain" to "chain-ZIL-chain". This work demonstrates rational design of ion transport paths at the interface of solid electrolyte could facilitate the development of solid-state lithium batteries as a promising novel strategy.

Solvation of quantum dots in 1-alkyl-1-methylpyrrolidinium ionic liquids: toward stably luminescent composites

CdTe nanoparticles capped with a cationic thiolate ligand were stably dispersed in ionic liquids, 1-alkyl-1-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)amides with an alkyl group of n-propyl, butyl and octyl-chain, and in an ionic plastic crystal, 1-ethyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide. Dispersion behavior of CdTe nanoparticles in these ionic media was evaluated, in which the solvation of nanoparticles by the ionic components was particularly interested. The ionic media showed alkyl-chain length-dependent solvation behavior, which was suggested by the thermal analysis of nanocomposites. The longer alkyl-chains led to the greater decrease in the thermal melting enthalpy of ionic media with the introduction of nanoparticles. The ionic liquid with an octyl-chain, which is considered to form a thicker solvation layer, afforded better emission durability of CdTe nanoparticles compared to the ionic liquid with a shorter alkyl chain.

Organic-inorganic hybrids for CO2 sensing, separation and conversion

Motivated by the air pollution that skyrocketed in numerous regions around the world, great effort was placed on discovering new classes of materials that separate, sense or convert CO₂ in order to minimise impact on human health. However, separation, sensing and conversion are not only closely intertwined due to the ultimate goal of improving human well-being, but also because of similarities in material prerequisites -e.g. affinity to CO₂. Partly inspired by the unrivalled performance of complex natural materials, manifold inorganic-organic hybrids were developed. One of the most important characteristics of hybrids is their design flexibility, which results from the combination of individual constituents with specific functionality. In this review, we discuss commonly used organic, inorganic, and inherently hybrid building blocks for applications in separation, sensing and catalytic conversion and highlight benefits like durability, activity, low-cost and large scale fabrication. Moreover, we address obstacles and potential future developments of hybrid materials. This review should inspire young researchers in chemistry, physics and engineering to identify and overcome interdisciplinary research challenges by performing academic research but also - based on the ever-stricter emission regulations like carbon taxes - through exchanges between industry and science.

Density Functional Theory Studies on Zeolitic Imidazolate Framework-8 and Ionic Liquid-Based Composite Materials

The identification of suitable density functional methods for predicting the properties of nanoporous composite materials is highly significant in the field of chemical and material sciences. The stability of the composite materials depends on the nature of bonding and dispersive interaction at the interface. Thus, we have studied the effect of dispersion correction in the incorporation of hydrophobic and hydrophilic ionic liquids (ILs) into zeolitic imidazolate framework-8 (ZIF-8) nanostructures using the density functional theory (DFT)-based approaches. These structures were analyzed employing selected methods (Becke-Lee-Yang-Parr and Perdew-Burke-Ernzerhof) with dispersion correction (D2 or D3) and different basis sets (such as double-zeta valence polarized (DZVP), triple-zeta valence polarized (TZVP), and triple-zeta valence doubly polarized (TZV2P)) for the understanding of microscopic features of IL@ZIF-8 nanopores. It is found that the result obtained from DFT-D2/TZVP is more reliable for the prediction of the experimental crystal structure as well as stability and spectral information of the complexes. Furthermore, the microscopic analysis of geometries reveals that ILs are highly dispersed and stabilized at the nanopores of ZIF-8, particularly the ZIF-8 structure is highly preferable for the hydrophobic group in ILs. It is found that fluorine-containing anions are highly dispersed on the ZIF-8 surface compared to the nonfluorinated anion (i.e., [BMIM]⁺[Cl]^-). This is confirmed from the adsorption energies (E _ads), charge transfer, electron density analyses, and IR spectral analysis. These findings can provide more insights into the stability of composite materials, which are suitable for applications of catalytic conversion at the confined state, gas storage, and separation techniques.

ZIF-8-Based Quasi-Solid-State Electrolyte for Lithium Batteries

The quasi-solid-state electrolytes (QSSEs) with an inorganic skeleton, a solid-liquid composite material combining their respective merits, exhibit high ionic conductivity and mechanical strength. However, most quasi-solid electrolytes prepared by immobilizing ionic liquid (IL) or organic liquid electrolyte in inorganic scaffold generally have poor interface compatibility and low lithium ion migration number, which limits its application. Herein, we design and prepare a ZIF-8-based QSSE (ZIF-8 QSSE) in which the ZIF-8 has a special cage structure and interaction with the guest electrolyte to form a composite electrolyte with good ionic conductivity about 1.05 × 10^-4 S cm^-1 and a higher lithium-ion transference number of about 0.52. With the ZIF-8 QSSE, a protype lithium battery coupled with LiCoO₂ cathode shows good electrochemical performances with an initial discharge capacity of 135 mAh g^-1 at 50 mA g^-1 and a remaining capacity of 119 mAh g^-1 after 100 cycles, only 0.119% capacity degradation per cycle. It is worth noting that the ZIF-8-based QSSEs have good thermal stability up to 350 °C that does not show thermal runaway, which is significantly higher than that of a conventional organic liquid battery system.

Bunching and Immobilization of Ionic Liquids in Nanoporous Metal-Organic Framework

Room-temperature ionic liquids (ILs) are a unique, novel class of designer solvents and materials with exclusive properties, attracting substantial attention in fields like energy storage and supercapacitors as well as in ion-based signal processing and electronics. For most applications, ILs need to be incorporated or embedded in solid materials like porous hosts. We investigate the dynamic structure of ILs embedded in well-defined pores of metal-organic frameworks (MOFs). The experimental data combined with molecular dynamics simulations unveil astonishing dynamic properties of the IL in the MOF nanoconfinement. At low IL loadings, the ions drift in the pores along the electric field, whereas at high IL loadings, collective field-induced interactions of the cations and anions lead to blocking the transport, thus suppressing the ionic mobility and tremendously decreasing the conductivity. The mutual pore blockage causes immobilized ions in the pores, resulting in a highly inhomogeneous IL density and bunched-up ions at the clogged pores. These results provide novel molecular-level insights into the dynamics of ILs in nanoconfinement, significantly enhancing the tunability of IL material properties.

Preconcentration of tropane alkaloids by a metal organic framework (MOF)-immobilized ionic liquid with the same nucleus for their quantitation in Huashanshen tablets

The application of ionic liquids (ILs) for the separation of bioactive compounds from various sample matrices is a burgeoning area.

Facile Approach to Graft Ionic Liquid into MOF for Improving the Efficiency of CO2 Chemical Fixation

This work describes a facile approach to modify metal-organic frameworks (MOFs) with ionic liquids (ILs), rendering them as useful heterogeneous catalysts for CO₂ chemical fixation. An amino-functionalized imidazolium-based ionic liquid is firmly grafted into the porous MOF, MIL-101-SO₃H by the acid-base attraction between positively charged ammonium groups on the IL and negatively charged sulfonate groups from the MOF. Analyses by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ¹H NMR, and N₂ sorption experiments reveal the MOF-supported ionic liquid (denoted as IL@MOF) material remains intact while functioning as a recyclable heterogeneous catalyst that can efficiently convert CO₂ and epichlorohydrin into chloropropene carbonate without the addition of a cocatalyst.