Synthetic Covalent and Non-Covalent 2D Materials

Increasing Dimensionality in Self-Assembly: Toward Two-Dimensional Supramolecular Polymers

Different approaches to achieve 2D supramolecular polymers, as an alternative to the covalent bottom-up approaches reported for the preparation of 2D materials, are reviewed. The significance of the operation of weak non-covalent forces to induce a lateral growth of a number of self-assembling units is collected. The examples of both thermodynamically and kinetically controlled formation of 2D supramolecular polymers showed in this review demonstrate the utility of this strategy to achieve new 2D materials with biased morphologies (nanosheets, scrolls, porous surfaces) and showing elegant applications like chiral recognition, enantioselective uptake or asymmetric organic transformations. Furthermore, elaborated techniques like seeded or living supramolecular polymerizations have been demonstrated to give rise to complex 2D nanostructures.

Quantum enhanced efficiency and spectral performance of paper-based flexible photodetectors functionalized with two dimensional materials

Flexible photodetectors (PDs) have exotic significance in recent years due to their enchanting potential in future optoelectronics. Moreover, paper-based fabricated PDs with outstanding flexibility unlock new avenues for future wearable electronics. Such PD has captured scientific interest for its efficient photoresponse properties due to the extraordinary assets like significant absorptive efficiency, surface morphology, material composition, affordability, bendability, and biodegradability. Quantum-confined materials harness the unique quantum-enhanced properties and hold immense promise for advancing both fundamental scientific understanding and practical implication. Two-dimensional (2D) materials as quantum materials have been one of the most extensively researched materials owing to their significant light absorption efficiency, increased carrier mobility, and tunable band gaps. In addition, 2D heterostructures can trap charge carriers at their interfaces, leading increase in photocurrent and photoconductivity. This review represents comprehensive discussion on recent developments in such PDs functionalized by 2D materials, highlighting charge transfer mechanism at their interface. This review thoroughly explains the mechanism behind the enhanced performance of quantum materials across a spectrum of figure of merits including external quantum efficiency, detectivity, spectral responsivity, optical gain, response time, and noise equivalent power. The present review studies the intricate mechanisms that reinforce these improvements, shedding light on the intricacies of quantum materials and their significant capabilities. Moreover, a detailed analysis of the technical applicability of paper-based PDs has been discussed with challenges and future trends, providing comprehensive insights into their practical usage in the field of future wearable and portable electronic technologies.

Computational tools to study non-covalent interactions and confinement effects in chemical systems

Confinement is a very common phenomenon in chemistry, for example, when molecules are located inside cavities. In these conditions, the electronic structure of atoms and molecules is modified. These changes could be mapped through the interaction with other molecules since non-covalent interactions between molecules are also influenced by confinement. In this work we address both topics, non-covalent interactions, and confined systems, using quantum chemistry tools with new software, emphasizing the importance of analyzing both fields simultaneously.

Precise Control of Two-Dimensional Hexagonal Platelets via Scalable, One-Pot Assembly Pathways Using Block Copolymers with Crystalline Side Chains

Crystallization-driven self-assembly (CDSA) of block copolymers (BCPs) in selective solvents provides a promising route for direct access to two-dimensional (2D) platelet micelles with excellent uniformity, although significant limitations also exist for this robust approach, such as tedious, multistep procedures, and low yield of assembled materials. Herein, we report a facile strategy for massively preparing 2D, highly symmetric hexagonal platelets with precise control over their dimensions based on BCPs with crystalline side chains. Mechanistic studies unveiled that the formation of hexagonal platelets was subjected to a hierarchical self-assembly process, involving an initial stage of formation of kinetically trapped spheres upon cooling driven by solvophobic interactions, and a second stage of fusion of such spheres to the 2D nuclei to initiate the lateral growth of hexagonal platelets via sequential particle attachments driven by thermodynamically ordered reorganization of the BCP upon aging. Moreover, the size of the developed 2D hexagonal platelets could be finely regulated by altering the copolymer concentration over a broad concentration range, enabling scale-up to a total solids concentration of at least 6% w/w. Our work reveals a new mechanism to create uniform 2D core-shell nanoparticles dictated by crystallization and particle fusion, while it also provides an alternative facile strategy for the design of soft materials with precise control of their dimensions, as well as for the scalability of the derived nanostructures.

Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer

Bottom-up fabrication protocols for uniform 3D hierarchical structures in solution are rare. We report two different approaches to fabricate uniform 3D spherulites and their precursors using mixtures of poly(ferrocenyldimethylsilane) (PFS) block copolymer (BCP) and PFS homopolymer (HP). Both protocols are designed to promote defects in 2D assemblies that serve as intermediate structures. In a multistep seeded growth protocol, we add the BCP/HP mixture to (1D) rod-like PFS micelles in a selective solvent as first-generation seeds. This leads to 2D platelet structures. If this step is conducted at a high supersaturation, secondary crystals form on the basal surface of these platelets. Co-crystallization and rapid crystallization of BCP/HP promote the formation of defects that act as nucleation sites for secondary crystals, resulting in multilayer platelets. This is the key step. The multilayer platelets serve as second-generation seeds upon subsequent addition of BCP/HP blends and, with increasing supersaturation, lead to the sequential formation of uniform (3D) hedrites, sheaves, and spherulites. Similar structures can also be obtained by a simple one-pot direct self-assembly (heating-cooling-aging) protocol of PFS BCP/HP blends. In this case, for a carefully chosen but narrow temperature range, PFS HPs nucleate formation of uniform structures, and the annealing temperature regulates the supersaturation level. In both protocols, the competitive crystallization kinetics of HP/BCP affects the morphology. Both protocols exhibit broad generality. We believe the morphological transformation from 2D to 3D structures, regulated by defect formation, co-crystallization, and supersaturation levels, could apply to various semicrystalline polymers. Moreover, the 3D structures are sufficiently robust to serve as recoverable carriers for nanoparticle catalysts, exhibiting valuable catalytic activity and opening new possibilities for applications requiring exquisite 3D structures.

Enhancing the Scalability of Crystallization-Driven Self-Assembly Using Flow Reactors

Anisotropic materials have garnered significant attention due to their potential applications in cargo delivery, surface modification, and composite reinforcement. Crystallization-driven self-assembly (CDSA) is a practical way to access anisotropic structures, such as 2D platelets. Living CDSA, where platelets are formed by using seed particles, allows the platelet size to be well controlled. Nonetheless, the current method of platelet preparation is restricted to low concentrations and small scales, resulting in inefficient production, which hampers its potential for commercial applications. To address this limitation, continuous flow reactors were employed to improve the production efficiency. Flow platforms ensure consistent product quality by maintaining the same parameters throughout the process, circumventing batch-to-batch variations and discrepancies observed during scale-up. In this study, we present the first demonstration of living CDSA performed within flow reactors. A continuous flow system was established, and the epitaxial growth of platelets was initially conducted to study the influence of flow parameters such as temperature, residence time, and flow rate on the morphology of platelets. Comparison of different epitaxial growth manners of seeds and platelets was made when using seeds to perform living CDSA. Size-controllable platelets from seeds can be obtained from a series flow system by easily tuning flow rates. Additionally, uniform platelets were continuously collected, exhibiting improved size and dispersity compared to those obtained in batch reactions.

Tuning the Functionality of Self-Assembled 2D Platelets in the Third Dimension

The decoration of 2D nanostructures using heteroepitaxial growth is of great importance to achieve functional assemblies employed in biomedical, electrical, and mechanical applications. Although the functionalization of polymers before self-assembly has been investigated, the exploration of direct surface modification in the third dimension from 2D nanostructures has, to date, been unexplored. Here, we used living crystallization-driven self-assembly to fabricate poly(ε-caprolactone)-based 2D platelets with controlled size. Importantly, surface modification of the platelets in the third dimension was achieved by using functional monomers and light-induced polymerization. This method allows us to selectively regulate the height and fluorescence properties of the nanostructures. Using this approach, we gained unprecedented spatial control over the surface functionality in the specific region of complex 2D platelets.

Role of Competitive Crystallization Kinetics in the Formation of 2D Platelets with Distinct Coronal Surface Patterns via Seeded Growth

Low dispersity 2D platelet micelles with controllable surface patterns were prepared by seeded-growth/living crystallization-driven self-assembly (CDSA) of block copolymer/homopolymer (BCP/HP) blends of poly(ferrocenyldimethylsilane)-b-poly(2-vinyl pyridine) (PFS-b-P2VP) and PFS. The precise morphology was found to be dependent on the proportion of the P2VP corona block, which can be efficiently controlled by changing the molar concentration ratio of PFS-b-P2VP/PFS, (c_B/c_H)_t, as well as their relative rates of crystallization, (G_B/G_H)_t. In the case where their molar concentration ratio was comparable to their crystallization rate ratio, platelets with a uniform distribution of P2VP coronal chains were formed. In other cases, as the concentration ratio increased (or decreased) during the living CDSA process, hierarchical structures were formed, including chain-like assemblies consisting of end-to-end linked rectangular platelets and fusiform (tapered) micelles. (G_B/G_H)_t was adjusted by tuning the degree of polymerization of the crystallizable PFS core-forming block and the BCP block ratio and by varying the terminus of the HP or changing the solvent used. Furthermore, the open edge of the platelets remained active for further growth, which permitted control of the morphology and dimensions of the platelets. Interestingly, in cases where the molar concentration ratio was lower than the crystallization rate ratio, growth rings were observed after two or more living CDSA steps. This study on the formation of platelet micelles by living CDSA of BCP/HP blends under kinetic control offers a considerable scope for the design of 2D polymer nanomaterials with controlled shape and surface patterns.

Two-Dimensional Janus Film with Au Nanoparticles Assembled on Trinuclear Gold(I) Pyrazolate Coordination Nanosheets for Photocatalytic H2 Evolution

A two-dimensional (2D) Janus film with self-assembled gold nanoparticles (AuNPs) is a class of fascinating materials that may offer unprecedented opportunities to realize diverse applications due to their two distinct faces with anisotropic properties. In this work, we report a novel, straightforward strategy for the preparation of a bilayer coordination nanosheet (CONASH)/AuNP Janus film, where the CONASH features infinite trinuclear gold(I) pyrazolate cyclic complexes with electron-accepting viologen as bridges. The bilayer film has visible light absorption and redox properties and showcased promising photocatalytic H₂ evolution activity by virtue of the formed unique heterojunction structure between AuNPs and CONASH. The current study opens a novel pathway for controlled fabrication of the 2D Janus film with assembled AuNPs for photocatalytic applications.

Two-Dimensional Hybrid Nanosheet-Based Supercapacitors: From Building Block Architecture, Fiber Assembly, and Fabric Construction to Wearable Applications

Fiber-based supercapacitors (F-SCs) have inspired widespread interest in the fields of wearable technology, energy, and carbon neutralization due to their highly deformable flexibility, fast charging/discharging capability, long-term stability, and energy conservation ability. In this review, we summarize the latest developments for fabricating fibrous electrodes of F-SCs where advanced micro two-dimensional (2D) building blocks (e.g., MXene and graphene) are chemically assembled and constructed into ordered mesofibers and multifunctional macrofabrics. Diverse fundamental principles of 2D hybrid nanosheets with respect to surface controls, pseudocapacitive modifications, and microstructural manipulations, promoting rapid electron transfer and charge conduction, are introduced. Additionally, various spinning methods for assembling and fabricating sophisticated fibers with advanced nano/microstructures, including hierarchical skeletons, anisotropic backbones, surface/entire porous frameworks, and vertical-aligned networks, for boosting ionic kinetic transport/storage are presented. Likewise, the structure-activity relationships between the porous structure and electrochemical performance are clarified. Moreover, multifunctional fabrics in terms of high flexibilities/strengths, superior electrical conductivities, and stabilized operations, which realize large energy density, deformable capability, and robust stability under harsh conditions, are emphasized. In particular, the potential power-supply applications, including flexible electronic devices, self-powered functions, and energy-sensor systems, are highlighted. Finally, a short conclusion and outlook, along with the current challenges and future opportunities of next-generation F-SCs, are proposed.

Water-Phase Lateral Interconnecting Quantum Dots as Free-Floating 2D Film Assembled by Hydrogen-Bonding Interactions to Acquire Excellent Electrocatalytic Activity

Supramolecular self-assembly of nanoparticles in two orthogonal directions would potentially allow one to fabricate nanomaterials with fascinating properties. In this study of a hydrothermal polycondensation of melamine/cyanuric acid, graphitic carbon nitride-based quantum dots (CNQD, ∼2 nm) are in situ arranged along two orthogonal directions through lateral hydrogen bonding, and free-floating two-dimensional hydrogen-bonded films of CNQD (2D CNQD) are built. On the basis of the universality of this hydrothermal in situ supramolecular self-assembly technique, 2D films linked by other quantum dots such as sulfur-doped graphitic carbon nitride and CdTe are also constructed. With the benefits of stimuli responsiveness and the reversibility of hydrogen bonds, controllable assembly/disassembly of the 2D CNQD film is feasibly achieved by external stimuli such as inletting CO₂/N₂, which endows the assembled 2D CNQD films optimal electrochemical superiorities of both 2D film and zero-dimensional (0D) quantum dots. Accordingly, the 2D CNQD film delivers a high bifunctional activity in both a nitrogen reduction reaction (NRR) and an oxygen evolution reaction (OER). Especially in NRR, it exhibits the high yield rate of NH₃ reaching 75.07 μg h^-1 mg^-1 at -0.85 V versus reversible hydrogen electrode at ambient condition. Strikingly, the power density of the rechargeable Zn-N₂ battery using 2D CNQD film as cathode reaches 31.94 mW cm^-2, outperforming the majority of Zn-N₂ batteries. Density functional theory calculations proved the promoted adsorption of N₂ and stabilized NRR intermediates on 2D CNQD cooperated by multiply hydrogen-bonding interactions are the main reasons for the excellent NRR electrocatalytic performances. This work hints that hydrothermal in situ supramolecular self-assembly is a feasible and direct way to integrate 0D quantum dots into 2D directional arrays, and the hydrogen bond that interlinks enables this free-floating 2D structure to maintain the electrochemical superiority of both 0D and 2D structures.

Morphologically Tunable Supramolecular Rectangular Microsheet and Microsaw Constructed by Hierarchical Self-assembly Based on Hydrogen Bonds

Amino acid derivative TDAV as new building blocks for two-dimensional (2D) supramolecular assembly has been designed. Various square and rectangular microsheets are achieved and the aspect ratios are precisely regulated by controlling the polarity of cosolvent or water content. By the introduction of chirality, the novel microsaw is also achieved. It provides a new approach to prepare various kinds of unique supramolecular 2D materials with controllable shapes and sizes for future biological applications. This article is protected by copyright. All rights reserved.

Organoplatinum(II) Cruciform: A Versatile Building Block to Fabricate 2D Microcrystals with Full-Color and White Phosphorescence and Anisotropic Photon Transport

Conventional square-planar platinum complexes typically form one-dimensional assemblies as a result of unidirectional metallophilic and/or π⋅⋅⋅π intermolecular interactions. Organoplatinum(II) complexes with a cruciform shape are presented herein to construct two-dimensional (2D) microcrystals with full-color and white phosphorescence. These 2D crystals show unique monocomponent π⋅⋅⋅π stacking, from either the cyclometalating or noncyclometalating ligand, and the bicomponent alternate π⋅⋅⋅π stacking from both ligands along different facet directions. Anisotropic tri-directional waveguiding is further implemented on a single hexagonal microcrystal. These results demonstrate the great capability of the organoplatinum(II) cruciform as a general platform to fabricate 2D phosphorescent micro-/nanocrystals for advanced photonic applications.

Emerging Two-Dimensional Covalent and Coordination Polymers for Stable Lithium Metal Batteries: From Liquid to Solid

Lithium metal anodes (LMAs) have attracted much attention in recent years because of their high theoretical capacity (3860 mAh g^-1) and low electrochemical potential (-3.040 V vs standard hydrogen electrode). Lithium metal can be coupled with various cathodes to construct high-energy-density lithium metal batteries (LMBs) which hold great promise for next-generation batteries. However, the unstable solid electrolyte interphases (SEIs) and the uncontrollable lithium dendrite growth severely hinder the commercial development of LMAs. The emerging 2D polymers (2DPs), which possess high mechanical flexibility, high specific surface area, abundant surface chemistry, and rich chemical modification characteristics, have shown great advantages in addressing the inherent issues of LMAs. Herein, the current progress of 2DPs for stable and dendrite-free LMAs in liquid- and solid-based batteries is comprehensively reviewed. Some perspectives for the application of 2DPs in LMBs are also discussed. It is believed that the emerging 2DPs will provide insights into developing high-energy-density LMBs and beyond.

Effect of adsorption and substitutional B doping at different concentrations on the electronic and magnetic properties of a BeO monolayer: a first-principles study

The 2D form of the BeO sheet has been successfully prepared (Hui Zhang et al., ACS Nano, 2021, 15, 2497). Motivated by these exciting experimental results on the 2D layered BeO structure, we studied the effect of the adsorption of B atoms on BeO (B@BeO) and substitutional B atoms (B-BeO) at the Be site at different B concentrations. We investigated the structural stability and the mechanical, electronic, magnetic, and optical properties of the mentioned structures using first-principles calculations. We found out that hexagonal BeO monolayers with adsorbed and dopant B atoms have different mechanical stabilities at different concentrations. B@BeO and B-BeO monolayers are brittle structures, and B@BeO structures are more rigid than B-BeO monolayers (at the same B concentration). The adsorption and the formation energy per B atom decrease as the B concentration increases. In comparison, the work function increases when increasing the B concentration. The work function of B@BeO is higher than the corresponding value of B-BeO (at the same B concentration). The magnetic moment linearly increases as the B concentration increases. BeO is a semiconductor with an indirect bandgap of 5.3 eV. The B@BeO and B-BeO structures are semiconductors, except for 3B-BeO (14.2% doped concentration), which is a metal. The bandgap is 1.25 eV for most of the adsorbed atom concentrations. For B-BeO, the bandgap decreases to zero at a concentration of 14.2%. The bandgap of the B-BeO monolayer at different B concentrations is smaller than the corresponding values of the B@BeO monolayer, which indicates that B substitutional doping has a greater effect on the electronic structure of the BeO monolayer than B adsorption doping. We investigated the optical properties, including the dielectric function and absorption coefficient. The results indicate good optical absorption in the range of infrared and ultraviolet energies for the B adsorbed and doped BeO monolayer.

A new cobalt(II) complex nanosheet as an electroactive medium for plasmonic switching on Au nanoparticles

2D metal-organic complex nanosheets with the merits of high stability and structure tunability are an emerging topic in recent years. To extend the promising ultrathin architectures, a new Co(II) complex nanosheet (Co-nanosheet) is designed and prepared via a readily operated interface-assisted coordination reaction between the ligand 4,4'',4'''-(2,4,6-trimethylbenzene-1,3,5-triyl)tris(2,2':6',2''-terpyridyl) (L) and Co²⁺ ions. The as-formed Co(II) complex nanosheet exhibits both a uniform layered structure and good thermostability as proposed, which were verified by various chemical and physical analytical methods. Moreover, it is first utilized as an electroresponsive medium to tune the surface plasmon resonance behavior of Au nanoparticles, expanding the applicable fields of this type of 2D materials.

Terpyridine-Induced Folding of Anisotropic Polyphosphoester Platelets

The folding of macromolecules is of great importance in nature. Also in synthetic polymer chemistry, single-chain nanoparticles, i.e. folding synthetic macromolecules, are a current research topic to mimic protein folding and to generate well-defined structures. Here, we present the "folding" of anisotropic polymer platelets to further mimic natural folding processes on the (sub)micrometer scale. We report on the synthesis of terpyridine-functionalized long-chain polyphosphoesters by acyclic diene metathesis polymerization that can crystallize in dilute solution into anisotropic polymer crystal platelets. As the terpyridine units are expelled to the platelet surface, terpyridine-metal interactions could be induced by adding nickel(II) bis(acetylacetonate) (Ni(acac)₂) to the platelet dispersion in ethyl acetate. These polymer crystals were "folded" to homogeneous nanoparticles with a wrinkled structure, which were visualized by transmission electron microscopy (TEM). The size and size distribution of the obtained assemblies could be altered by varying the concentration of Ni(acac)₂. In contrast, no wrinkled structures but rather intrachain cross-linking was observed, when Ni(acac)₂ was added to the homogeneous polymer solution before crystallization. We believe that this concept of "folding" anisotropic polymer platelets will further enhance the control of morphologies on (sub)micrometer particles and might be useful for catalysis or separation.

Self-assembly of cellulose for creating green materials with tailor-made nanostructures

Inspired by living systems, biomolecules have been employed in vitro as building blocks for creating advanced nanostructured materials. In regard to nucleic acids, peptides, and lipids, their self-assembly pathways and resulting assembled structures are mostly encoded in their molecular structures. On the other hand, outside of its chain length, cellulose, a polysaccharide, lacks structural diversity; therefore, it is challenging to direct this homopolymer to controllably assemble into ordered nanostructures. Nevertheless, the properties of cellulose assemblies are outstanding in terms of their robustness and inertness, and these assemblies are attractive for constructing versatile materials. In this review article, we summarize recent research progress on the self-assembly of cellulose and the applications of assembled cellulose materials, especially for biomedical use. Given that cellulose is the most abundant biopolymer on Earth, gaining control over cellulose assembly represents a promising route for producing green materials with tailor-made nanostructures.

Supramolecular 2D monolayered nanosheets constructed by using synergy of non-covalent interactions

Here, a straightforward and rational approach to construct supramolecular assemblies with ordered nanostructures in a two-dimensional arrangement is reported. Taking advantage of the synergistic effect of multiple non-covalent interactions (hydrogen bonding and π-π interactions), the designed molecular monomer has a specific orientation in the self-assembly process, thus realizing two-dimensional control. Supramolecular two-dimensional nanosheets with single-layer thickness and controllable dimensions have been obtained, which can be clearly confirmed using TEM, SEM, AFM and XRD and by comparing with the self-assembled structures of the control system. The strategy of collaborative self-assembly proposed here using multiple non-covalent interactions is expected to be extended to the construction of various kinds of unique supramolecular 2D materials.

Thickness control of 2D nanosheets assembled from precise side-chain giant molecules

The performance of 2D nanomaterials hinges on both the chemical compositions and the morphological structures across different length scales. Among all the three dimensions, thickness is the only one that falls into the nanometer scale and, to some extent, determines the intrinsic properties of 2D nanomaterials. In this study, we report the preparation and precise thickness control of 2D nanosheets assembled from a library of monodispersed amphiphilic giant molecules composed of functional polyhedral oligomeric silsesquioxanes (POSSs) as the side groups. Solution self-assembly of such giant molecules resulted in 2D nanosheets with similar structural configurations, where a bilayer of hydrophobic isobutyl POSS (BPOSS) is sandwiched by two monolayers of hydrophilic POSS bearing carboxylic acid groups (APOSS). The thickness of the obtained nanosheets could be tuned through adjusting the chemical compositions of the pendant POSS cages. Intriguingly, we found that the thickness of the 2D nanosheets was not necessarily proportional to the contour length of the giant molecule nor the total number of POSS cages tethered to the main chain. Indeed, the number ratio of BPOSS to APOSS, rather than the exact number, played a deterministic role in the thickness control. To explain the unusual thickness dependence, we built up a structure model with an in-plane orientation of the giant molecules in the nanosheets, from which a formula was further deduced to semi-quantitatively describe the inverse relationship between the overall thickness and the number ratio of BPOSS to APOSS.

Self-Assembly of Bolaamphiphiles into 2D Nanosheets via Synergistic and Meticulous Tailoring of Multiple Noncovalent Interactions

A bolaamphiphile possessing a hydrophobic skeleton and two hydrophilic groups at both ends represents an important class of building blocks toward a rich variety of self-assembled materials for use in ion transport, optoelectronic devices, and drug and gene delivery. Herein, we report a one-step synthesis of an array of rationally designed anionic bolaamphiphiles and unravel the correlation between molecular structure of anionic bolaamphiphiles and their disparate self-assemblies via synergistic and meticulous tailoring of a set of interactions. Intriguingly, by delicately regulating the interactions among these supramolecular interactions, two-dimensional (2D) nanosheets are crafted via self-assembly of anionic bolaamphiphiles. Particularly, single-layered 2D nanosheets are formed through the synergy of aromatic π-π stacking, hydrophobic, hydrogen-bonding, and electrostatic repulsion interactions. In contrast, the selective converting of anionic headgroups of bolaamphiphiles into nonpolar alkyl chain screens the electrostatic repulsion between neighboring bolaamphiphiles while keeping the other segments of bolaamphiphiles intact, thereby allowing them to self-assemble into multilayered 2D nanosheets. Interestingly, the intrinsically charged 2D nanosheets could anchor oppositely charged metal nanoparticles via electrostatic attraction. Conceptually, anionic bolaamphiphile-derived 2D nanosheets may function as a substrate to position a diversity of nanocrystals and conjugated polymers for a broad range of applications in catalysis, optical devices, and photothermal therapy.

Emerging applications for living crystallization-driven self-assembly

The use of crystallization as a tool to control the self-assembly of polymeric and molecular amphiphiles in solution is attracting growing attention for the creation of non-spherical nanoparticles and more complex, hierarchical assemblies. In particular, the seeded growth method termed living crystallization-driven self-assembly (CDSA) has been established as an ambient temperature and potentially scalable platform for the preparation of low dispersity samples of core-shell fiber-like or platelet micellar nanoparticles. Significantly, this method permits predictable control of size, and access to branched and segmented structures where functionality is spatially-defined. Living CDSA operates under kinetic control and shows many analogies with living chain-growth polymerizations of molecular organic monomers that afford well-defined covalent polymers of controlled length except that it covers a much longer length scale (ca. 20 nm to 10 μm). The method has been applied to a rapidly expanding range of crystallizable polymeric amphiphiles, which includes block copolymers and charge-capped homopolymers, to form assemblies with crystalline cores and solvated coronas. Living CDSA seeded growth methods have also been transposed to a wide variety of π-stacking and hydrogen-bonding molecular species that form supramolecular polymers in processes termed "living supramolecular polymerizations". In this article we outline the main features of the living CDSA method and then survey the promising emerging applications for the resulting nanoparticles in fields such as nanomedicine, colloid stabilization, catalysis, optoelectronics, information storage, and surface functionalization.

Towards scalable, low dispersity, and dimensionally tunable 2D platelets using living crystallization-driven self-assembly

Scalable low dispersity platelets were accessed through the self-assembly of crystallizable charge-terminated PFS homopolymers. The use of surfactant counteranions, as well as increasing the self-assembly temperature, improved structure fidelity.

Interface engineering and integration of two-dimensional polymeric and inorganic materials for advanced hybrid structures

Recent progress and future directions in the creation of hybrid structures based on 2D polymers and inorganic 2D materials are discussed.

C-C Coupling Reactions for the Synthesis of Two-Dimensional Conjugated Polymers

Extension of conjugated polymers from 1D to 2D can not only significantly enhance the dissociation of charge and excitons, but also induce other advantages, such as high in-plane mechanical strength, large specific surface area and porosity, and more active centers. 2D conjugated polymers can be divided into C-C bonded 2D polymers based on C-C coupling reactions, and heteroatomic bonded 2D polymers based on reversible heteroatom coupling reactions. C-C bonded 2D polymers are generally more stable than heteroatomic bonded 2D polymers as the latter bonds are easily hydrolyzed. This Review mainly summarizes C-C coupling reactions that are suitable for synthesizing 2D conjugated polymers, and the properties of these 2D conjugated polymers are also introduced.

Surface Patterning of Uniform 2D Platelet Block Comicelles via Coronal Chain Collapse

The formation of colloids with anisotropically patterned surfaces is of growing interest for the creation of hierarchical structures and the templating of nanoparticles. We have recently shown that well-defined two-dimensional platelets with low areal dispersities can be formed by the seeded growth of a blend of homopolymers and block copolymers. Herein we form rectangular platelets containing two block copolymers with different coronal chemistries. On addition of a solvent that is only able to solvate the corona of one block, we were able to form colloidally stable micelles with patterned surfaces via coronal collapse. Scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy and atomic force microscopy were employed to provide information on the structure and size of the patches decorating the micelle surfaces.

Controlled synthesis of organic two-dimensional nanostructures via reaction-driven, cooperative supramolecular polymerization

The bottom-up approach of supramolecular polymerization is an effective synthetic method for functional organic nanostructures. However, the uncontrolled growth and polydisperse structural outcome often lead to low functional efficiency. Thus, precise control over the structural characteristics of supramolecular polymers is the current scientific hurdle. Research so far has tended to focus on systems with inherent kinetic control by the presence of metastable state monomers either through conformational molecular design or by exploring pathway complexity. The need of the hour is to create generic strategies for dormant states of monomers that can be extended to different molecules and various structural organizations and dimensions. Here we venture to demonstrate chemical reaction-driven cooperative supramolecular polymerization as an alternative strategy for the controlled synthesis of organic two-dimensional nanostructures. In our approach, the dynamic imine bond is exploited to convert a non-assembling dormant monomer to an activated amphiphilic structure in a kinetically controlled manner. The chemical reaction governed retarded nucleation-elongation growth provides control over dispersity and size.

Control over the Aspect Ratio of Supramolecular Nanosheets by Molecular Design

Recent developments in kinetically controlled supramolecular polymerization permit control of the size (i.e., length and area) of self-assembled nanostructures. However, control of molecular self-assembly at a level comparable with organic synthetic chemistry and the achievement of structural complexity at a hierarchy larger than the molecular level remain challenging. This study focuses on controlling the aspect ratio of supramolecular nanosheets. A systematic understanding of the relationship between the monomer structure and the self-assembly energy landscape has derived a new monomer capable of forming supramolecular nanosheets. With this monomer in hand, the aspect ratio of a supramolecular nanosheet is demonstrated that it can be controlled by modulating intermolecular interactions in two dimensions.

Electrically Conductive Metal-Organic Frameworks

Metal–organic frameworks (MOFs) are intrinsically porous extended solids formed by coordination bonding between organic ligands and metal ions or clusters. High electrical conductivity is rare in MOFs, yet it allows for diverse applications in electrocatalysis, charge storage, and chemiresistive sensing, among others. In this Review, we discuss the efforts undertaken so far to achieve efficient charge transport in MOFs. We focus on four common strategies that have been harnessed toward high conductivities. In the “through-bond” approach, continuous chains of coordination bonds between the metal centers and ligands’ functional groups create charge transport pathways. In the “extended conjugation” approach, the metals and entire ligands form large delocalized systems. The “through-space” approach harnesses the π–π stacking interactions between organic moieties. The “guest-promoted” approach utilizes the inherent porosity of MOFs and host–guest interactions. Studies utilizing less defined transport pathways are also evaluated. For each approach, we give a systematic overview of the structures and transport properties of relevant materials. We consider the benefits and limitations of strategies developed thus far and provide an overview of outstanding challenges in conductive MOFs.

Creation of a two-dimensional polymer and graphene heterostructure

van der Waals (vdW) heterostructures generated by stacking of graphene with other two-dimensional (2D) crystalline sheets have produced a new class of "designer" materials which shows great promise for nanoscience and nanotechnology. However, the 2D sheets are obtained either from nature or synthesized by high-energy procedures, which preclude the design of their structures as well as properties from molecular design on demand. Here, we introduced a rationally designed 2D polymer (one-monomer unit thick, freestanding network composed of periodically linked monomers) as a component for heterostructure construction, and created a 2D polymer-graphene heterostructure. The heterostructure has a high chemical stability, and could be thermally stable up to 400 °C. In the heterostructure, the 2D polymer doped graphene without changing its intrinsic structure, leading to the enhancement of its electric conductivity by a factor of ∼2.5. This piece of work opens the door to tune the properties of graphene heterostructures with rational design for specific applications.

Construction of MnO2 Artificial Leaf with Atomic Thickness as Highly Stable Battery Anodes

The leaf-like structure is a classic and robust structure and its unique vein support can reduce structural instability. However, biomimetic leaf structures on the atomic scale are rarely reported due to the difficulty in achieving a stable vein-like support in a mesophyll-like substrate. A breathable 2D MnO₂ artificial leaf is first reported with atomic thickness by using a simple and mild one-step wet chemical method. This homogeneous ultrathin leaf-like structure comprises of vein-like crystalline skeleton as support and amorphous microporous mesophyll-like nanosheet as substrate. When used as an anode material for lithium ion batteries, it first solves the irreversible capacity loss and poor cycling issue of pure MnO₂ , which delivers high capacity of 1210 mAh g^-1 at 0.1 A g^-1 and extremely stable cycle life over 2500 cycles at 1.0 A g^-1 . It exhibits the most outstanding cycle life of pure MnO₂ and even comparable to the most MnO₂ -based composite electrode materials. This biomimetic design provides important guidelines for precise control of 2D artificial systems and gives a new idea for solving poor electrochemical stability of pure metal oxide electrode materials.

Synthesis, thermoresponsivity and multi-tunable hierarchical self-assembly of multi-responsive (AB)mC miktobrush-coil terpolymers

Stimuli-responsive miktobrush-coil terpolymers can exhibit unique physical properties and hierarchical self-assembly behaviors dependent on composition, concentration and external stimuli.

Recent advances in two-dimensional materials and their nanocomposites in sustainable energy conversion applications

Two-dimensional (2D) materials have a wide platform in research and expanding nano- and atomic-level applications. This study is motivated by the well-established 2D catalysts, which demonstrate high efficiency, selectivity and sustainability exceeding that of classical noble metal catalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and/or hydrogen evolution reaction (HER). Nowadays, the hydrogen evolution reaction (HER) in water electrolysis is crucial for the cost-efficient production of a pure hydrogen fuel. We will also discuss another important point related to electrochemical carbon dioxide and nitrogen reduction (ECR and N2RR) in detail. In this review, we mainly focused on the recent progress in the fuel cell technology based on 2D materials, including graphene, transition metal dichalcogenides, black phosphorus, MXenes, metal-organic frameworks, and metal oxide nanosheets. First, the basic attributes of the 2D materials were described, and their fuel cell mechanisms were also summarized. Finally, some effective methods for enhancing the performance of the fuel cells based on 2D materials were also discussed, and the opportunities and challenges of 2D material-based fuel cells at the commercial level were also provided. This review can provide new avenues for 2D materials with properties suitable for fuel cell technology development and related fields.

Free-Standing CoO-POM Janus-like Ultrathin Nanosheets

A single-step solution-based strategy is used to obtain 2D Janus-like free-standing ultrathin nanosheets build from two structurally unrelated species, that is, polyoxomolybdate (POM) and CoO. A controlled 2D-to-1D morphological transition was achieved by judiciously adjusting the solvent choice. These POM-CoO heterostructures can behave as an ideal catalyst for the epoxidation of styrene. Benefiting from their amphiphilic nature, these 2D POM-CoO nanosheets have also been used as surfactant to emulsify immiscible solvents. It is anticipated that structurally diverse polyoxometalates will offer promise as design elements for variety of structurally and compositionally tunable van der Waals integrated heteromaterials having a broad range applications.