Efficient Visible-Light-Driven Z-Scheme Overall Water Splitting Using a MgTa2O6−xNy /TaON Heterostructure Photocatalyst for H2Evolution

ZnO@In2O3 Core-Shell Heterojunctions Constructed With ZIF-8 and MIL-68 (In) for Improving Photogenerated Carrier Transfer Process

The realization of fast carrier transport can effectively enhance photocatalytic performance. A core-shell structure of ZnO and In2O3 is successfully constructed by using MIL-68 (In) and ZIF-8 as a substrate, forming a heterojunction. This MOF-derived core-shell heterojunction inherits the advantages of ZIF-8, with pores facilitating carriers transfer to the surface for reactions and a large specific surface area providing more active sites. This Z-scheme heterojunction of ZnO and In2O3 can effectively separate and improve the utilization of photogenerated carriers. The well-designed interface of the core-shell structure achieves the rapid transfer of photogenerated carriers. The photocatalytic degradation capability of ZnO@ In2O3 is enhanced by the synergistic effect of Z-scheme heterojunction and core-shell structure. This work provides insight into the investigation of constructing core-shell heterojunctions.

Recent Advances in Redox-Based Z-Scheme Overall Water Splitting under Visible Light Irradiation

Photocatalytic overall water splitting (OWS) using suspended particulate photocatalysts to produce green hydrogen has inspired continuous interest due to its low cost for easy large-scale application. The two-step photoexcitation system (Z-scheme) mimicking natural photosynthesis was proposed to efficiently use visible light for realization of efficient conversion of solar irradiation. In this Perspective, we will introduce recent advances in redox-based Z-scheme OWS systems, including iodine-based, iron-based, metal complex-based, and other special ion redox couples. The advantages and challenges of each couple and the factors affecting the Z-scheme OWS efficiency are discussed in detail. Finally, the challenges and feasible solutions for the achievement of highly efficient Z-scheme OWS are then outlined. This Perspective provides guidance on how to construct a Z-scheme OWS system and enhance photocatalytic performance.

Efficient and stable visible-light-driven Z-scheme overall water splitting using an oxysulfide H2 evolution photocatalyst

So-called Z-scheme systems permit overall water splitting using narrow-bandgap photocatalysts. To boost the performance of such systems, it is necessary to enhance the intrinsic activities of the hydrogen evolution photocatalyst and oxygen evolution photocatalyst, promote electron transfer from the oxygen evolution photocatalyst to the hydrogen evolution photocatalyst, and suppress back reactions. The present work develop a high-performance oxysulfide photocatalyst, Sm2Ti2O5S2, as an hydrogen evolution photocatalyst for use in a Z-scheme overall water splitting system in combination with BiVO4 as the oxygen evolution photocatalyst and reduced graphene oxide as the solid-state electron mediator. After surface modifications of the photocatalysts to promote charge separation and redox reactions, this system is able to split water into hydrogen and oxygen for more than 100 hours with a solar-to-hydrogen energy conversion efficiency of 0.22%. In contrast to many existing photocatalytic systems, the water splitting activity of the present system is only minimally reduced by increasing the background pressure to 90 kPa. These results suggest characteristics suitable for applications under practical operating conditions.

Transition-metal (oxy)nitride photocatalysts for water splitting

Solar-driven water splitting based on particulate semiconductor materials is studied as a technology for green hydrogen production. Transition-metal (oxy)nitride photocatalysts are promising materials for overall water splitting (OWS) via a one- or two-step excitation process because their band structure is suitable for water splitting under visible light. Yet, these materials suffer from low solar-to-hydrogen energy conversion efficiency (STH), mainly because of their high defect density, low charge separation and migration efficiency, sluggish surface redox reactions, and/or side reactions. Their poor thermal stability in air and under the harsh nitridation conditions required to synthesize these materials makes further material improvements difficult. Here, we review key challenges in the two different OWS systems and highlight some strategies recently identified as promising for improving photocatalytic activity. Finally, we discuss opportunities and challenges facing the future development of transition-metal (oxy)nitride-based OWS systems.

Photocatalytic Z-scheme Overall Water Splitting: Insight into Different Optimization Strategies for Powder Suspension and Particulate Sheet Systems

Achieving solar light-driven photocatalytic overall water splitting is the ideal and ultimate goal for solving energy and environment issues. Photocatalytic Z-scheme overall water splitting has undergone considerable development in recent years; specific approaches include a powder suspension Z-scheme system with a redox shuttle and a particulate sheet Z-scheme system. Of these, a particulate sheet has achieved a benchmark solar-to-hydrogen efficiency exceeding 1.1 %. Nevertheless, owing to intrinsic differences in the components, structure, operating environment, and charge transfer mechanism, there are several differences between the optimization strategies for a powder suspension and particulate sheet Z-scheme. Unlike a powder suspension Z-scheme with a redox shuttle, the particulate sheet Z-scheme system is more like a miniaturized and parallel p/n photoelectrochemical cell. In this review, we summarize the optimization strategies for a powder suspension Z-scheme with a redox shuttle and particulate sheet Z-scheme. In particular, attention has been focused on choosing appropriate redox shuttle and electron mediator, facilitating the redox shuttle cycle, avoiding redox mediator-induced side reactions, and constructing a particulate sheet. Challenges and prospects in the development of efficient Z-scheme overall water splitting are also briefly discussed.

Tungsten Oxide-Based Z-Scheme for Visible Light-Driven Hydrogen Production from Water Splitting

The stoichiometric water splitting using a solar-driven Z-scheme approach is an emerging field of interest to address the increasing renewable energy demand and environmental concerns. So far, the reported Z-scheme must comprise two populations of photocatalysts. In the present work, only tungsten oxides are used to construct a robust Z-scheme system for complete visible-driven water splitting in both neutral and alkaline solutions, where sodium tungsten oxide bronze (Na_0.56WO_3-x) is used as a H₂ evolution photocatalyst and two-dimensional (2D) tungsten trioxide (WO₃) nanosheets as an O₂ evolution photocatalyst. This system efficiently produces H₂ (14 μmol h^-1) and O₂ (6.9 μmol h^-1) at an ideal molar ratio of 2:1 in an aqueous solution driven by light, resulting in a remarkably high apparent quantum yield of 6.06% at 420 nm under neutral conditions. This exceptional selective H₂ and O₂ production is due to the preferential adsorption of iodide (I^-) on Na_0.56WO_3-x and iodate (IO₃^-) on WO₃, which is evidenced by both experiments and density functional theory calculation. The present liquid Z-scheme in the presence of efficient shuttle molecules promises a separated H₂ and O₂ evolution by applying a dual-bed particle suspension system, thus a safe photochemical process.

In situ synthesis of g-C3N4/TiO2 heterojunction by a concentrated absorption process for efficient photocatalytic degradation of tetracycline hydrochloride

The construction of heterojunctions between semiconductors is a preferred route to improve overall photocatalytic activity. In this work, a facile and feasible method was innovatively developed to one-step prepare g-C3N4/TiO2 heterojunctions via an absorption-calcination process using nitrogen and titanium precursors directly. This method can effectively avoid interfacial defects and establish a tight interfacial connection between g-C3N4 and TiO2. The resultant g-C3N4/TiO2 composites exhibited prominent photodegradation efficiency for tetracycline hydrochloride (TC-HCl) under visible light and simulated-sunlight irradiation. The optimal g-C3N4/TiO2 composite (urea content of 4 g) showed the highest photocatalytic efficiency, which can degrade 90.1% TC-HCl under simulated-sunlight irradiation within 30 min, achieving 3.9 and 2 times increases compared to pure g-C3N4 and TiO2, respectively. Besides, photodegradation pathways based on the role of active species ·O2- and ·OH were identified, indicating that a direct Z-scheme heterojunction was formed over the g-C3N4/TiO2 photocatalyst. The enhanced photocatalytic performance can be attributed to the close-knit interface contact and the formation of Z-scheme heterojunction between g-C3N4 and TiO2, which can accelerate the photo-induced charge carrier separation, broaden the spectra absorption range, and retain a higher redox potential. This one-step synthesis method may provide a new strategy for the construction of Z-scheme heterojunction photocatalysts consisting of g-C3N4 and TiO2 for environmental remediation and solar energy utilization.

A perspective on two pathways of photocatalytic water splitting and their practical application systems

Photocatalytic water splitting has been widely studied as a means of converting solar energy into hydrogen as an ideal energy carrier in the future. Systems for photocatalytic water splitting can be divided into one-step excitation and two-step excitation processes. The former uses a single photocatalyst while the latter uses a pair of photocatalysts to separately generate hydrogen and oxygen. Significant progress has been made in each type of photocatalytic water splitting system in recent years, although improving the solar-to-hydrogen energy conversion efficiency and constructing practical technologies remain important tasks. This perspective summarizes recent advances in the field of photocatalytic overall water splitting, with a focus on the design of photocatalysts, co-catalysts and reaction systems. The associated challenges and potential approaches to practical solar hydrogen production via photocatalytic water splitting are also presented.

Construction of TiO2 /SrTiO3 Heterojunction Derived from Monolayer Ti3 C2 MXene for Efficient Photocatalytic Overall Water Splitting

Construction of heterojunction at the atomic scale to ensure efficient charge separation for improvement of photocatalytic water splitting is challenging. Herein, a facile hydrothermal method has been applied for the in situ fabrication of TiO₂ /SrTiO₃ heterojunction, using the monolayer Ti₃ C₂ MXene as the template and reactant. It is found that the sample with the hydrothermal reaction time of 60 min exhibits the highest H₂ evolution rate with the sacrificial reagent, due to the efficient charge separation of TiO₂ /SrTiO₃ heterojunction as Ti₃ C₂ derivative. In addition, the sample shows the best overall water splitting performance at a hydrothermal reaction time of 120 min, where TiO₂ is nearly converted to SrTiO₃ , due to the fast kinetic process and low structural defects of SrTiO₃ . This work not only provides a simple strategy for the fabrication of heterojunction photocatalysts but also demonstrates the difference in optimization of half-reaction and overall water splitting reaction.

Patterning alternate TiO2 and Cu2O strips on a conductive substrate as film photocatalyst for Z-scheme photocatalytic water splitting

Semiconductor heterostructures mediated by electrical conductors are very promising for Z-scheme photocatalytic water splitting. In contrast to conventional particulate heterostructures, alternate TiO₂ and Cu₂O film stripes patterned parallel on a fluorine-doped tin oxide (FTO) conductive substrate was fabricated as a model film photocatalyst to study the characteristics of the photogenerated charge transfer process. The Z-scheme transfer process with an effective transport distance of up to 5 μm occurs only in regions distant from the TiO₂/Cu₂O strip edges through the FTO substrate from the bottom. In contrast, the transfer of charge around their contact regions follows the conventional transfer process through the TiO₂/Cu₂O strip interface. These results indicate that the Z-scheme transfer process occurring in such a large region dominates the charge transfer processes in the TiO₂/FTO/Cu₂O pattern film heterostructure. Importantly, unlike the single component film, which is inactive for photocatalytic overall water splitting, the modified TiO₂/Cu₂O pattern film can induce photocatalytic overall water splitting at a stoichiometric H₂/O₂ ratio close to 2:1. These findings have significant implications in designing efficient heterostructures by employing a Z-scheme charge transfer process.

Fabrication of TaON/CdS Heterostructures for Enhanced Photocatalytic Hydrogen Evolution under Visible Light Irradiation

Developing high-performance photocatalysts for H2 production via fabricating heterojunctions has attracted much attention. Herein, we design a simple strategy to prepare composites that consist of TaON/CdS hybrids via a hydrothermal process. The results show that the pristine CdS nanoparticles loaded with 20 wt% TaON (TC4) could maximize the photocatalytic hydrogen evolution rate to 19.29 mmol g−1 h−1 under visible light irradiation, which was 2.13 times higher than that of the pristine CdS (9.03 mmol g−1 h−1) under the same conditions. The apparent quantum yield (AQY) of the TC4 nanocomposites at 420 nm was calculated to be 18.23%. The outstanding photocatalytic performance of the composites can be ascribed to the formation of heterojunctions. The electrochemical measurements indicate that the decoration facilitates the generation of extra photo-electrons, prolonging the recombination rate of photogenerated charge carriers, offering adequate active sites and improving catalytic stability. This study sheds light on the construction strategy and the deep understanding of the novel CdS-based composites for high-performance photocatalytic H2 production.

Surface-modified, dye-sensitized niobate nanosheets enabling an efficient solar-driven Z-scheme for overall water splitting

While dye-sensitized metal oxides are good candidates as H₂ evolution photocatalysts for solar-driven Z-scheme water splitting, their solar-to-hydrogen (STH) energy conversion efficiencies remain low because of uncontrolled charge recombination reactions. Here, we show that modification of Ru dye-sensitized, Pt-intercalated HCa₂Nb₃O₁₀ nanosheets (Ru/Pt/HCa₂Nb₃O₁₀) with both amorphous Al₂O₃ and poly(styrenesulfonate) (PSS) improves the STH efficiency of Z-scheme overall water splitting by a factor of ~100, when the nanosheets are used in combination with a WO₃-based O₂ evolution photocatalyst and an I₃^-/I^- redox mediator, relative to an analogous system that uses unmodified Ru/Pt/HCa₂Nb₃O₁₀. By using the optimized photocatalyst, PSS/Ru/Al₂O₃/Pt/HCa₂Nb₃O₁₀, a maximum STH of 0.12% and an apparent quantum yield of 4.1% at 420 nm were obtained, by far the highest among dye-sensitized water splitting systems and comparable to conventional semiconductor-based suspended particulate photocatalyst systems.

Solar Energy Catalysis

When it comes to using solar energy to promote catalytic reactions, photocatalysis technology is the first choice. However, sunlight can not only be directly converted into chemical energy through a photocatalytic process, it can also be converted through different energy-transfer pathways. Using sunlight as the energy source, photocatalytic reactions can proceed independently, and can also be coupled with other catalytic technologies to enhance the overall catalytic efficiency. Therefore, sunlight-driven catalytic reactions are diverse, and need to be given a specific definition. We propose a timely perspective for catalytic reactions driven by sunlight and give them a specific definition, namely "solar energy catalysis". The concept of different types of solar energy catalysis, such as photocatalysis, photothermal catalysis, solar cell powered electrocatalysis, and pyroelectric catalysis, are highlighted. Finally, their limitations and future research directions are discussed.

Epitaxial Orientation Angle Tuned Disk-on-Rod Nanoheterostructures for Boosting Charge Transfer

Controlling the compositions of Se(VI) and Te(VI) ions in a 2D disk on 1D structures of Sb(V) chalcogenides, disk-on-rod heterostructures having three different epitaxial angles with different surface facets are reported. Te injection temperature determined the composition, ensuring heterostructure formation with trigonal Sb₂Se_xTe_3-x disks on orthorhombic Sb₂Se₃ rods having orientation angles 180°, 135°, and 90°. The growth kinetics of disks connected at one/two heads of parent rods is manipulated using an Se precursor as a limiting reagent. Theoretical calculations established the energy minimization of different orientations, their possible formation, and suitability in energy transfer applications. Electrochemical measurements were also in agreement with theoretical calculations. Hence, this is a case study of advanced modular synthesis of disk-on-rod nanostructures, leading a step further in nanocrystal engineering for more desirable complex structures and their charge transfer property.

Enhanced Overall Water Splitting by a Zirconium-Doped TaON-Based Photocatalyst

Solar-powered one-step-excitation overall water splitting (OWS) using semiconducting materials is a simple means of achieving scalable and sustainable hydrogen production. While tantalum oxynitride (TaON) is one of the few photocatalysts capable of promoting OWS via single-step visible-light excitation, the efficiency of this process remains extremely poor. The present work employed 15 nm amorphous Ta₂ O₅ ⋅3.3 H₂ O nanoparticles as a new precursor together with Zr doping and an optimized nitridation duration to synthesize a TaON-based photocatalyst with reduced particle sizes and low defect densities. Upon loading with Ru/Cr₂ O₃ /IrO₂ cocatalysts, this material exhibited stoichiometric water splitting into hydrogen and oxygen, with an order of magnitude improvement in efficiency. Our findings demonstrate the importance of inventing/selecting the appropriate synthetic precursor and of defect control for fabricating active OWS photocatalysts.

Recent advances and perspectives for solar-driven water splitting using particulate photocatalysts

The conversion and storage of solar energy to chemical energy via artificial photosynthesis holds significant potential for optimizing the energy situation and mitigating the global warming effect. Photocatalytic water splitting utilizing particulate semiconductors offers great potential for the production of renewable hydrogen, while this cross-road among biology, chemistry, and physics features a topic with fascinating interdisciplinary challenges. Progress in photocatalytic water splitting has been achieved in recent years, ranging from fundamental scientific research to pioneering scalable practical applications. In this review, we focus mainly on the recent advancements in terms of the development of new light-absorption materials, insights and strategies for photogenerated charge separation, and studies towards surface catalytic reactions and mechanisms. In particular, we emphasize several efficient charge separation strategies such as surface-phase junction, spatial charge separation between facets, and polarity-induced charge separation, and also discuss their unique properties including ferroelectric and photo-Dember effects on spatial charge separation. By integrating time- and space-resolved characterization techniques, critical issues in photocatalytic water splitting including photoinduced charge generation, separation and transfer, and catalytic reactions are analyzed and reviewed. In addition, photocatalysts with state-of-art efficiencies in the laboratory stage and pioneering scalable solar water splitting systems for hydrogen production using particulate photocatalysts are presented. Finally, some perspectives and outlooks on the future development of photocatalytic water splitting using particulate photocatalysts are proposed.

Unraveling of cocatalysts photodeposited selectively on facets of BiVO4 to boost solar water splitting

Bismuth vanadate (BiVO₄) has been widely investigated as a photocatalyst or photoanode for solar water splitting, but its activity is hindered by inefficient cocatalysts and limited understanding of the underlying mechanism. Here we demonstrate significantly enhanced water oxidation on the particulate BiVO₄ photocatalyst via in situ facet-selective photodeposition of dual-cocatalysts that exist separately as metallic Ir nanoparticles and nanocomposite of FeOOH and CoOOH (denoted as FeCoO_x), as revealed by advanced techniques. The mechanism of water oxidation promoted by the dual-cocatalysts is experimentally and theoretically unraveled, and mainly ascribed to the synergistic effect of the spatially separated dual-cocatalysts (Ir, FeCoO_x) on both interface charge separation and surface catalysis. Combined with the H₂-evolving photocatalysts, we finally construct a Z-scheme overall water splitting system using [Fe(CN)₆]^3−/4− as the redox mediator, whose apparent quantum efficiency at 420 nm and solar-to-hydrogen conversion efficiency are optimized to be 12.3% and 0.6%, respectively.

Artificial photosynthesis offers an integrated means to convert light to fuel, but efficiencies are often low. Here, authors report a Z-scheme system utilizing Ir and FeCoO_x co-catalysts to enhance charge separation on BiVO₄ facets that achieves high quantum efficiencies for overall water splitting.

Designing a Z-scheme system based on photocatalyst panels towards separated hydrogen and oxygen production from overall water splitting

Based on this tandem system, gases evolved in the ZOWS process can be separated spontaneously.

pH-induced hydrothermal synthesis of Bi2WO6 nanoplates with controlled crystal facets for switching bifunctional photocatalytic water oxidation/reduction activity

Bifunctional photocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) have attracted growing interest to understand the mechanisms governing different evolution reactions, and the bifunctional activity of a single type of crystalline photocatalyst has gained especial attention. We herein report the high photocatalytic OER and HER activities of Bi₂WO₆ nanoplates (BWO NPs) which are synthesized by a simple hydrothermal method, and the switchable OER and HER performances controlled by the pH value of the precursor solvent. In the pH range from 4 to 9, the thickness of BWO NPs along the [001] direction exhibits interesting dependence on the pH value, which decreases as the pH value increases. Correspondingly, the BWO NPs obtained at the pH value of 7 (BWO-7) show the highest photocatalytic OER activity, while the BWO NPs synthesized at the pH value of 9 (BWO-9) exhibit the highest photoactivity towards HER. The electronic band structure analysis indicates that the highest photocatalytic OER activity is related to the band alignment of the valence band maximum of Bi₂WO₆, which determines the efficient separation of photogenerated electrons and holes as well as the fast charge transfer kinetics. The crystal facet evolution resulting from thickness reduction promotes the exposure of {001} facets for HER and decreases the exposure of {100} and {010} facets for OER. This work provides new insights into the combined effects of crystal facets and electronic band structures on photocatalysis.

Visible light active Zr- and N-doped TiO2 coupled g-C3N4 heterojunction nanosheets as a photocatalyst for the degradation of bromoxynil and Rh B along with the H2 evolution process

Herein, we drastically increased the l ight-harvesting abilities of TiO₂ by creating a defect level with doping using zirconium (Zr) and nitrogen (N). Titanium was substantially replaced by Zr from its lattice point, and N was bound on the surface as (NO)_x. The doped system comes with a reduced band edge of 2.8 eV compared to pure TiO₂ (3.2 eV), and the doping was accompanied by a higher rate of recombination of photogenerated electron-hole pairs. A heterostructure was fabricated between the modified titania and g-C₃N₄ to efficiently separate the carriers. An easy and cost-effective sol-gel process followed by a co-calcination technique was used to synthesize the nanostructured composite. The optimum dopant concentration and the extent of doping were investigated via XRD, Raman, XPS, TEM, and PL analyses, followed by a photocatalytic study. The impact of the band positions was investigated via UV-DRS and EIS. The dynamic nature of the band alignment at the depletion region of the heterojunction increased the carrier mobility from the bulk to active sites. The photogenerated electrons and holes retained their characteristic redox abilities to generate both OH˙ and O₂ ^-˙ through a z-scheme mechanism. The photocatalytic activity resulted in superior photocatalytic H₂ evolution along with the defragmentation of bromoxynil, a persistent herbicide. The active catalyst exhibited 97% degradation efficiency towards pollutants along with 0.86% apparent quantum efficiency during the H₂ evolution reaction.

Does Symmetry Control Photocatalytic Activity of Titania-Based Photocatalysts?

Decahedral anatase particles (DAPs) have been prepared by the gas-phase method, characterized, and analyzed for property-governed photocatalytic activity. It has been found that depending on the reaction systems, different properties control the photocatalytic activity, that is, the particle aspect ratio, the density of electron traps and the morphology seem to be responsible for the efficiency of water oxidation, methanol dehydrogenation and oxidative decomposition of acetic acid, respectively. For the discussion on the dependence of the photocatalytic activity on the morphology and/or the symmetry other titania-based photocatalysts have also been analyzed, that is, octahedral anatase particles (OAP), commercial titania P25, inverse opal titania with and without incorporated gold NPs in void spaces and plasmonic photocatalysts (titania with deposits of gold). It has been concluded that though the morphology governs photocatalytic activity, the symmetry (despite its importance in many cases) rather does not control the photocatalytic performance.

Synthesis of a Visible-Light-Responsive Perovskite SmTiO2 N Bifunctional Photocatalyst via an Evaporation-Assisted Layered-Precursor Strategy

Development of visible-light-responsive oxynitride photocatalysts has been highly inspired for promising solar-to-chemical conversion, but the number of Ti-based oxynitrides is scarce because of the relatively low thermal stability of Ti⁴⁺ ions under ammonia flow. Here, the feasible synthesis of a novel perovskite SmTiO₂ N from the layered NaSmTiO₄ precursor is demonstrated to exhibit wide visible-light response with a bandgap of ≈2.1 eV and to show effective water reduction and oxidation functionalities under visible-light irradiation. The successful preparation mainly results from the synergistic effect of the layered structure of NaSmTiO₄ and the evaporation spillover of Na⁺ ions, both of which are favorable for ammonia diffusion to accelerate the substitution of nitrogen to oxygen atoms and to shorten the nitridation time. The thermodynamic and kinetic feasibility of SmTiO₂ N for water splitting are investigated in detail, and its optimal apparent quantum efficiency (AQE) of water oxidation reaches 16.7% at 420 ± 10 nm, higher by far than that of most previous visible-light-responsive photocatalysts. Interestingly, a series of oxynitrides RTiO₂ N (R = La, Pr, Nd) are similarly synthesized by the alkali-metal evaporation-assisted layered-precursor strategy, demonstrating its generality to prepare visible-light-responsive (oxy)nitride photocatalysts containing reducible metals for solar energy conversion.

Surface Modifications of (ZnSe)0.5(CuGa2.5Se4.25)0.5 to Promote Photocatalytic Z-Scheme Overall Water Splitting

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p-n junction to particulate metal selenides to enhance photocatalytic Z-scheme overall water splitting (OWS). The constructed p-n junction of CdS-(ZnSe)_0.5(CuGa_2.5Se_4.25)_0.5 significantly boosted charge separation. A thin TiO₂ coating layer also was introduced to inhibit photocorrosion of CdS and suppress the backward reaction of water formation from hydrogen and oxygen. By employing Pt-loaded TiO₂/CdS-(ZnSe)_0.5(CuGa_2.5Se_4.25)_0.5 as a hydrogen evolution photocatalyst (HEP), we assembled a Z-scheme OWS system, together with BiVO₄:Mo and Au as an oxygen evolution photocatalyst and electron mediator, respectively. An apparent quantum yield of 1.5% at 420 nm was achieved, which is by far the highest among reported particulate photocatalytic Z-scheme OWS systems with metal sulfides/selenides as HEPs. The present work demonstrates that a well-tailored p-n junction structure is effective for promoting charge separation in photocatalysis and opens new pathways for the development of efficient artificial photosynthesis systems involving narrow bandgap photocatalysts.

Nanostructure Engineering and Modulation of (Oxy)Nitrides for Application in Visible-Light-Driven Water Splitting

(Oxy)nitride-based nanophotocatalysts have been extensively investigated for solar-to-chemical conversion, and not only allow wide spectral utilization to achieve high theoretical energy conversion efficiency but also exhibit suitable conduction and valence band positions for robust reduction and oxidation of water. During the past decades, a few reviews on the research progress in designing and synthesizing new visible-light-responsive semiconductors for various applications in solar-to-chemical conversion have been published. However, those on the effects of their bulk and composite (surface/interface) nanostructures on basic processes as well as solar water splitting performances to produce hydrogen are still limited. In this review, a brief introduction on the relationship between the nanostructure photocatalytic properties is included. Three main processes of solar water splitting are involved, allowing the elucidation of the correlation with the nanostructural properties of the photocatalyst such as surface/interface, size, morphology, and bulk structure. Subsequently, the development of methodologies and strategies for modulating the bulk and composite structures to improve the efficiencies of the basic processes, particularly charge separation, is summarized in detail. Finally, the prospects of (oxy)nitride-based photocatalysts such as controlled synthesis, modulation of 1D/2D morphology, exposed facet regulation, heterostructure formation, theoretical simulation, and time- and space-resolved spectroscopy are discussed.

Prospects and challenges in designing photocatalytic particle suspension reactors for solar fuel processing

Photocatalytic approaches for the production of solar hydrogen or hydrocarbons are interesting as they provide a sustainable alternative to fossil fuels. Research has been focused on water splitting and on the synthesis of photocatalyst materials and compounds, and their characterization. The material-related challenges include the synthesis and design of photocatalysts that can absorb visible light at a high quantum efficiency, cocatalysts that are selective and can accelerate the reduction and/or oxidation reactions, and protection layers that facilitate migration of the minority carriers to the surface-active sites while reducing charge recombination and photo-corrosion. Less attention has been paid to the conceptual design of reactors, and how design and coupled transport can affect the material choice and requirements. This perspective discusses the various possible conceptual designs for particle suspension reactors and the related implications on the material requirements to achieve high energy conversion efficiencies. We establish a link between the thermodynamic limits, materials requirements, and conceptual reactor designs, quantify changes in material requirements when more realistic operation and losses are considered, and compare the theory-derived guidelines with the ongoing materials research activity.

This perspective discusses the various possible conceptual designs for particle suspension reactors and the related implications on the material and reactor requirements to achieve high STH conversion efficiencies.

An Overview of the Photocatalytic Water Splitting over Suspended Particles

The conversion of solar to chemical energy is one of the central processes considered in the emerging renewable energy economy. Hydrogen production from water splitting over particulate semiconductor catalysts has often been proposed as a simple and a cost-effective method for large-scale production. In this review, we summarize the basic concepts of the overall water splitting (in the absence of sacrificial agents) using particulate photocatalysts, with a focus on their synthetic methods and the role of the so-called “co-catalysts”. Then, a focus is then given on improving light absorption in which the Z-scheme concept and the overall system efficiency are discussed. A section on reactor design and cost of the overall technology is given, where the possibility of the different technologies to be deployed at a commercial scale and the considerable challenges ahead are discussed. To date, the highest reported efficiency of any of these systems is at least one order of magnitude lower than that deserving consideration for practical applications.

Bifunctional black phosphorus: coupling with hematite for Z-scheme photocatalytic overall water splitting

Z-scheme 2D–2D BP/α-Fe₂O₃ heterostructure enables preferable photocatalytic properties for efficient overall water splitting under visible light.

Sr2NiWO6 Double Perovskite Oxide as a Novel Visible-Light-Responsive Water Oxidation Photocatalyst

Screening of stable visible-light-responsive water oxidation semiconductor photocatalysts is highly desired for the development of photocatalytic water splitting systems. Herein, a visible-light-absorbing Sr₂NiWO₆ double perovskite oxide photocatalyst was successfully prepared via a conventional solid-state reaction method. The intrinsic Sr₂NiWO₆ shows photocatalytic oxygen evaluation reaction (OER) activity of 60 μmol h^-1 g^-1, even without loading any cocatalysts. The DFT calculation indicates that the Ni species on the surface is the active site for the OER. The photocatalytic OER activity was further improved by loading Pt and RuO₂ dual redox cocatalysts on the surface of Sr₂NiWO₆ to achieve a photocatalytic OER activity of 420 μmol h^-1 g^-1, which corresponds to a remarkable apparent quantum efficiency (AQE) of 8.6% (λ ≈ 420 nm). The result indicates that Sr₂NiWO₆ is one of the best double perovskite oxide-based photocatalysts for the photocatalytic OER, and the activity is even comparable to the benchmark BiVO₄-based photocatalyst. The improvement of the photocatalytic OER activity is due to the provision of more active redox sites as well as the synergetic effect of the dual redox cocatalysts in facilitating charge separation and transfer. This work demonstrates that double perovskite oxides may serve as a novel class of efficient and stable oxide-based semiconductor photocatalysts for water splitting.

Boosted photocatalytic activity induced NAMPT-Regulating therapy based on elemental bismuth-humic acids heterojunction for inhibiting tumor proliferation/migration/inflammation

Due to the highly complex biological formation procedure, tumor is still difficult to be treated efficiently and always associated with proliferation, migration and inflammation during treatment. Herein, a novel strategy of boosted photocatalytic activity induced NAMPT-regulating therapy is used for tumors inhibition based on FK866 loaded bismuth-humic acids heterojunction (Bi-HA/FK866). With the reduction function of HA, Bi (Ⅲ) can be reduced to elemental Bi, which can be excited by NIR laser to form electron-hole pair due to the narrow bandgap. Moreover, the coated HA and Bi could form a heterojunction structure, which could decrease the electron-hole recombination, and further boost the photocatalytic activity, leading to highly efficient ROS generation and GSH depletion. The resulted ROS could induce DNA damage of the tumor cells, thus enhancing the sensitivity to the inhibitor of NAMPT (FK866) to downregulate NAD/ERK/NF-κB signal pathways, and eventually simultaneously prevent cancer progression. Moreover, the decreased NAD could downregulate NADPH and further suppress the innate antioxidant defense system by inhibiting reduction of GSSG. The boosted photocatalytic activity induced NAMPT-regulating therapy offers a promising way to address the important issue of penetration depth limitation induced cancer relapse and migration, providing more possibilities toward successful clinical application.

Photocatalytic and Photoelectrochemical Systems: Similarities and Differences

Photocatalytic and photoelectrochemical processes are two key systems in harvesting sunlight for energy and environmental applications. As both systems are employing photoactive semiconductors as the major active component, strategies have been formulated to improve the properties of the semiconductors for better performances. However, requirements to yield excellent performances are different in these two distinctive systems. Although there are universal strategies applicable to improve the performance of photoactive semiconductors, similarities and differences exist when the semiconductors are to be used differently. Here, considerations on selected typical factors governing the performances in photocatalytic and photoelectrochemical systems, even though the same type of semiconductor is used, are provided. Understanding of the underlying mechanisms in relation to their photoactivities is of fundamental importance for rational design of high-performing photoactive materials, which may serve as a general guideline for the fabrication of good photocatalysts or photoelectrodes toward sustainable solar fuel generation.

Z-Scheme Photocatalytic Systems for Solar Water Splitting

As the world decides on the next giant step for the renewable energy revolution, scientists have begun to reinforce their headlong dives into the exploitation of solar energy. Hitherto, numerous attempts are made to imitate the natural photosynthesis of plants by converting solar energy into chemical fuels which resembles the "Z-scheme" process. A recreation of this system is witnessed in artificial Z-scheme photocatalytic water splitting to generate hydrogen (H2). This work outlines the recent significant implication of the Z-scheme system in photocatalytic water splitting, particularly in the role of electron mediator and the key factors that improve the photocatalytic performance. The Review begins with the fundamental rationales in Z-scheme water splitting, followed by a survey on the development roadmap of three different generations of Z-scheme system: 1) PS-A/D-PS (first generation), 2) PS-C-PS (second generation), and 3) PS-PS (third generation). Focus is also placed on the scaling up of the "leaf-to-tree" challenge of Z-scheme water splitting system, which is also known as Z-scheme photocatalyst sheet. A detailed investigation of the Z-scheme system for achieving H2 evolution from past to present accompanied with in-depth discussion on the key challenges in the area of Z-scheme photocatalytic water splitting are provided.

A Hydrogen Farm Strategy for Scalable Solar Hydrogen Production with Particulate Photocatalysts

Scalable solar hydrogen production by water splitting using particulate photocatalysts is promising for renewable energy utilization. However, photocatalytic overall water splitting is challenging owing to slow water oxidation kinetics, severe reverse reaction, and H₂ /O₂ gas separation. Herein, mimicking nature photosynthesis, a practically feasible approach named Hydrogen Farm Project (HFP) is presented, which is composed of solar energy capturing and hydrogen production subsystems integrated by a shuttle ion loop, Fe³⁺ /Fe²⁺ . Well-defined BiVO₄ crystals with precisely tuned {110}/{010} facets are ideal photocatalysts to realize the HFP, giving up to 71 % quantum efficiency for photocatalytic water oxidation and full forward reaction with nearly no reverse reaction. An overall solar-to-chemical efficiency over 1.9 % and a solar-to-hydrogen efficiency exceeding 1.8 % could be achieved. Furthermore, a scalable HFP panel for solar energy storage was demonstrated under sunlight outdoors.

Embedding Ultrasmall Au Clusters into the Pores of a Covalent Organic Framework for Enhanced Photostability and Photocatalytic Performance

Gold clusters loaded on various supports have been widely used in the fields of energy and biology. However, the poor photostability of Au clusters on support interfaces under prolonged illumination usually results in loss of catalytic performance. Covalent organic frameworks (COFs) with periodic and ultrasmall pore structures are ideal supports for dispersing and stabilizing Au clusters, although it is difficult to encapsulate Au clusters in the ultrasmall pores. In this study, a two-dimensional (2D) COF modified with thiol chains in its pores was prepared. With -SH groups as nucleation sites, Au nanoclusters (NCs) could grow in situ within the COF. The ultrasmall pores of the COF and the strong S-Au binding energy combine to improve the dispersibility of Au NCs under prolonged light illumination. Interestingly, Au-S-COF bridging as observed in this artificial Z-scheme photocatalytic system is deemed to be an ideal means to increase charge-separation efficiency.

Experimental and DFT Studies of Au Deposition Over WO3/g-C3N4 Z-Scheme Heterojunction

A typical Z-scheme system is composed of two photocatalysts which generate two sets of charge carriers and split water into H₂ and O₂ at different locations. Scientists are struggling to enhance the efficiencies of these systems by maximizing their light absorption, engineering more stable redox couples, and discovering new O₂ and H₂ evolutions co-catalysts. In this work, Au decorated WO₃/g-C₃N₄ Z-scheme nanocomposites are fabricated via wet-chemical and photo-deposition methods. The nanocomposites are utilized in photocatalysis for H₂ production and 2,4-dichlorophenol (2,4-DCP) degradation. It is investigated that the optimized 4Au/6% WO₃/CN nanocomposite is highly efficient for production of 69.9 and 307.3 µmol h^-1 g^-1 H₂ gas, respectively, under visible-light (λ > 420 nm) and UV-visible illumination. Further, the fabricated 4Au/6% WO₃/CN nanocomposite is significant (i.e., 100% degradation in 2 h) for 2,4-DCP degradation under visible light and highly stable in photocatalysis. A significant 4.17% quantum efficiency is recorded for H₂ production at wavelength 420 nm. This enhanced performance is attributed to the improved charge separation and the surface plasmon resonance effect of Au nanoparticles. Solid-state density functional theory simulations are performed to countercheck and validate our experimental data. Positive surface formation energy, high charge transfer, and strong non-bonding interaction via electrostatic forces confirm the stability of 4Au/6% WO₃/CN interface.

Water Oxidation Catalysts for Artificial Photosynthesis

Water oxidation is the primary reaction of both natural and artificial photosynthesis. Developing active and robust water oxidation catalysts (WOCs) is the key to constructing efficient artificial photosynthesis systems, but it is still facing enormous challenges in both fundamental and applied aspects. Here, the recent developments in molecular catalysts and heterogeneous nanoparticle catalysts are reviewed with special emphasis on biomimetic catalysts and the integration of WOCs into artificial photosystems. The highly efficient artificial photosynthesis depends largely on active WOCs integrated into light harvesting materials via rational interface engineering based on in-depth understanding of charge dynamics and the reaction mechanism.