An Aluminum Hydride That Functions like a Transition-Metal Catalyst

Alkylaluminum Complexes Featuring Bridged Bis-Formylfluorenimide Ligands for Hydroboration of Aldehyde, Ketone, and Imines

Three bis-formylfluorenimide ligands with different bridging groups were designed and synthesized, leading to the successful preparation of six novel alkylaluminum complexes through their reaction with alkylaluminum reagents (AlMe3 or AlEt3). Complexes 1 and 2 were obtained by the reaction of 1,2-propylene-bridged diamine (L1) with AlMe3 or AlEt3. By reacting 1,2-cyclohexylene-bridged diamine (L2) with AlMe3 or AlEt3 to obtain complexes 3 and 4. The above ligands formed a bidentate four-coordinate structure with alkylaluminum, which involved the elimination of one alkyl group as the ligand reacted with alkylaluminum. The complexes 5 and 6 were synthesized through the reaction of 1,2-phenylene-bridged diamine (L3) with AlEt3 in toluene or tetrahydrofuran. Notably, L3 exhibited unique reactivity compared with the other ligands, which formed a tridentate four-coordinated structure when reacting with alkylaluminum. The formation of the tridentate complex resulted from the introduction of a benzimidazole derivative or tetrahydrofuran (THF) molecule along with the elimination of two alkyl groups during its coordination with alkylaluminum. All complexes were characterized via 1H NMR, 13C NMR, and elemental analysis, with structural determination confirmed through X-ray. Furthermore, the catalytic activity in the hydroboration reaction of aldehyde, ketone, and imines was investigated with these complexes as catalysts. Among them, complex 1 demonstrated excellent catalytic performance (up to 99% yield) and broad substrate compatibility (more than 30 substrates) at low catalyst loading (1 mol %) under mild reaction conditions.

Air-Stable Iron(III) Salen Complexes for Selective Hydroboration of Ketones and Unactivated Imines without Base Activation

Herein, we designed and synthesized a series of air-stable, cost-effective, and readily synthesizable iron(III) salen complexes (Fe-1 and Fe-2) for facilitating the selective hydroboration of ketones and unactivated imines with pinacolborane in the absence of any additive. These catalyst systems exhibited good yields, chemoselectivity, high atom economy, and a broad substrate scope under mild reaction conditions with a minimal catalyst loading of 0.2 mol %. The catalytic efficiency of Fe-1 has been demonstrated through the hydroboration of diverse aromatic, aliphatic, and heterocyclic ketones and imines with a turnover number of up to 1000, highlighting its broad substrate scope. Ketones are chemoselectively hydroborated over other functional groups such as imines, alkenes, esters, nitriles, acids, and alcohols. Besides, the synthetic utility of this strategy has also been showcased by the construction of a natural chiral monoterpenoid carveol. This protocol can be readily scaled up for gram-scale synthesis of alcohols, which underscores the potential industrial applicability of our catalyst system in the synthesis of secondary alcohols on a larger scale.

Divergent Reactivity of a Cyclic Bis-Hydridostannylene: A Masked Sn(I) Diradicaloid

Herein, reactivity studies of a cyclic bis-hydridostannylene [(ADC)SnH]2 (1-H2) (ADC=PhC{(NDipp)C}2; Dipp=2,6-iPr2C6H3) with various unsaturated organic substrates are reported. Reactions of terminal alkynes (RC≡CH) with 1-H2 afford mixed acetylide-vinyl-functionalized bis-stannylenes via dehydrogenation and hydrostannylation. Treatment of 1-H2 with PhC≡CCH3 gives a unique distannabarrelene via dehydrogenative C(sp3)-H stannylation and hydrostannylation of the C≡CCH3 moiety. 1-H2 undergoes dehydrogenative [2+2]-cycloaddition reactions with diphenylacetylene, azobenzene, acetone, benzophenone, and benzaldehyde to form the 1,4-distannabarrelene derivatives. The elimination of H2 in these reactions suggests the masked-diradical property of 1-H2. In fact, these [2+2]-cycloaddition products are also accessible on treatments of the Sn(I) diradicaloid [(ADC)Sn]2 (1) with appropriate reagents. All compounds have been characterized by multinuclear NMR spectroscopy and single crystal X-ray diffraction. Moreover, the catalytic activity of 1-H2 has been shown for the hydroboration of unsaturated substrates.

Chemoselective Luche-type reduction of α,β-unsaturated ketones by aluminium hydride catalysis

A novel, simple, eco-friendly, non-toxic aluminium catalyst was synthesised for the chemoselective reduction of α,β-unsaturated ketones. A wide range of ketones were achieved with excellent yields, mild conditions, and low catalyst loading. Furthermore, this unprecedented method allowed for the stereoselective reduction of natural ketones.

Highly Soluble Cyclic Organoalanes Based on Anionic Dicarbenes

Cyclic organoalane compounds [(ADCAr )AlH2 ]2 (ADCAr = ArC{(DippN)C}2 ; Dipp = 2,6-iPr2 C6 H3 ; Ar = Ph or 4-PhC6 H4 (Bp)) based on anionic dicarbene (ADC) frameworks have been reported as crystalline solids. Treatments of Li(ADCAr ) with LiAlH4 at room temperature afford [(ADCAr )AlH2 ]2 with the concomitant release of LiH. Compounds [(ADCAr )AlH2 ]2 are stable crystalline solids and are freely soluble in common organic solvents. They are annulated tricyclic compounds with an almost planar central C4 Al2 -core embedded between two peripheral 1,3-imidazole (C3 N2 ) rings. At room temperature, [(ADCPh )AlH2 ]2 readily reacts with CO2 to form two- and four-fold hydroalumination products [(ADCPh )AlH(OCHO)]2 and [(ADCPh )Al(OCHO)2 ]2 , respectively. Further hydroalumination reactivity of [(ADCPh )AlH2 ]2 has been shown with isocyanate (RNCO) and isothiocyanate (RNCS) species (R=alkyl or aryl group). All compounds have been characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction.

Half-Sandwich Ruthenium Complexes with Hydrazone Ligands: Preparation, Structure, and Catalytic Activity in Cyanosilylether Synthesis under an Air Atmosphere

A new class of N,O-coordinate half-sandwich ruthenium complexes supported by hydrazone ligands with a general formula of [Ru(η⁶-p-cymene)Cl(L)] have been obtained in moderate to excellent yields conveniently. These air- and moisture-stable ruthenium complexes exhibited excellent catalytic activity in cyanosilylether synthesis under mild reaction conditions. Under the catalysis of ruthenium, various cyanosilylethers with different substituents were obtained through a one-pot reaction of trimethylsilyl cyanide with carbonyl substrates, with good to excellent yields. Excellent catalytic efficiency, a wide substrate range, and mild reaction conditions made this type of ruthenium catalyst have potential for industrial application. All of the half-sandwich ruthenium complexes have been well described by infrared, nuclear magnetic resonance, and EA analysis. Molecular structures of ruthenium complexes 1 and 4 were confirmed by single-crystal X-ray analysis.

Accurate binding of porous aluminum molecular ring catalysts with the substrate

Metal molecular rings are a class of compounds with aesthetically pleasing symmetry and fundamentally useful properties. The reported work generally focuses on the ring center cavity, and there is little known about those on the ring waist. Herein, we report the discovery of porous aluminum molecular rings and their performance and contribution to the cyanosilylation reaction. We develop a facile ligand induced aggregation and solvent regulation strategy towards AlOC-58NC and AlOC-59NT with high purity, high yield (75% and 70%, respectively) and gram-level scale-up. These molecular rings exhibit a "two-tier" pore feature involving the general central cavity and newly observed equatorial semi-open cavities. AlOC-59NT with two types of one-dimensional channels showed good catalytic activity. The interaction of the aluminum molecular ring catalyst with the substrate has been crystallographically characterized and theoretically confirmed, showing a ring adaptability process that involves the capture and binding of the substrate. This work provides new ideas for the assembly of porous metal molecular rings and to understand the overall reaction pathway involving aldehydes and is expected to inspire the design of low-cost catalysts through structural modifications.

Group 13 exchange and transborylation in catalysis

Catalysis is dominated by the use of rare and potentially toxic transition metals. The main group offers a potentially sustainable alternative for catalysis, due to the generally higher abundance and lower toxicity of these elements. Group 13 elements have a rich catalogue of stoichiometric addition reactions to unsaturated bonds but cannot undergo the redox chemistry which underpins transition-metal catalysis. Group 13 exchange reactions transfer one or more groups from one group 13 element to another, through σ-bond metathesis; where boron is both of the group 13 elements, this is termed transborylation. These redox-neutral processes are increasingly being used to render traditionally stoichiometric group 13-mediated processes catalytic and develop new catalytic processes, examples of which are the focus of this review.

N^N vs. N^E (E = S or Se) coordination behavior of imino-phosphanamidinate chalcogenide ligands towards aluminum alkyls: efficient hydroboration catalysis of nitriles, alkynes, and alkenes

The synthesis, characterization, and catalytic application of six aluminum alkyl complexes supported by various imino-phosphanamidinate chalcogenide ligands are described. Six different unsymmetrical imino-phosphanamidinate chalcogenide ligands [NHI^RP(Ph)(E)NH-Dipp] [R = 2,6-diisopropylphenyl (Dipp), E = S (2a-H), Se (2b-H); R = mesityl (Mes), E = S (3a-H), Se (3b-H); R = tert-butyl (^tBu), E = S (4a-H), Se (4b-H)] were prepared by the oxidation of respective imino-phosphanamide ligands (1a, 1b and 1c) with elemental chalcogen atoms (S and Se). The aluminum complexes with imino-phosphanamidinate chalcogenide ligands with the general formulae [κ²_NN-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = Dipp, E = S (5a), Se (5b); R = Mes, E = S (6a), Se (6b)] or [κ²_NE-{NHI^RP(Ph)(E)N-Dipp}AlMe₂] [R = ^tBu, E = S (7a), Se (7b)] were synthesized in good yields from the reaction of the suitable protic ligands (2a,b-H-4a,b-H) and trimethylaluminum in a 1 : 1 molar ratio in toluene at room temperature. All the protic ligands and aluminum complexes were well characterized by multi-nuclear NMR spectroscopy, and the solid-state structures of 2a,b-H-4a,b-H, 5a,b-6a,b and 7b are established by single crystal X-ray diffraction analysis. The aluminum complexes 5a,b-7a,b were tested as catalysts for the hydroboration of nitriles, alkynes, and alkenes under mild conditions. The catalytic hydroboration reactions of nitriles, alkynes, and alkenes were accomplished with complex 5b at a mild temperature under solvent-free conditions to afford a high yield of the corresponding N,N-diborylamines, vinylboranes and alkyl boronate esters, respectively.

Aluminium-Catalyzed Selective Hydroboration of Esters and Epoxides to Alcohols: C-O Bond Activation

In this work, the molecular aluminium dihydride complex bearing an N, N'-chelated conjugated bis-guanidinate (CBG) ligand is used as a catalyst for reducing a wide range of aryl and alkyl esters with good tolerance of alkene (C=C), alkyne (C≡C), halides (Cl, Br, I and F), nitrile (C≡N), and nitro (NO₂ ) functionalities. Further, we investigated the catalytic application of aluminium dihydride in the C-O bond cleavage of alkyl and aryl epoxides into corresponding branched Markovnikov ring-opening products. In addition, the chemoselective intermolecular reduction of esters over other reducible functional groups, such as amides and alkenes, has been established. Intermediates are isolated and characterized by NMR and HRMS studies, which confirm the probable catalytic cycles for the hydroboration of esters and epoxides.

Synthesis and Structural Comparisons of NHC-Alanes

N-heterocyclic carbenes (NHCs) are widely used in organometallic chemistry. Here, we examine the role of NHCs in the stabilisation of aluminium hydrides, AlH3, also known as alanes. This includes an assessment of the various synthetic strategies, comparisons of structural parameters and theoretical insight. Based on percent buried volume (%Vbur) parameters, we report the largest and smallest NHC alanes to date, with noted differences in their observed stability in both the solution and solid state.

Transborylation-Enabled Boron Catalysis

This review highlights transborylation (controlled boron-boron exchange) and its applications as a turnover strategy in boron-catalysed methodologies. Catalytic applications of B–C, B–O, B–N, B–F, B–S, and B–Se transborylations are discussed in the context of transborylation-enabled catalysis, across a wide range of organic transformations including hydroboration, C–C bond formation, C–H borylation, chemoselective reduction, and asymmetric reduction.

1 Introduction

2 B–C Transborylation

3 B–O Transborylation

4 B–N Transborylation

5 B–F Transborylation

6 B–S Transborylation

7 Conclusion

Donor free stibenium cation as an efficient cyanosilylation catalyst

The synthesis of novel stibenium cations and their catalytic application in cyanosilylation of carbonyl compounds have been described. Treatment of chlorostibine L₁SbCl [L₁ = 1,2-C₆H₄{N(CH₂^tBu)}₂] (2) with 1 equiv. of AgOTf and AgSbF₆ resulted in the formation of donor free L₁SbOTf (3) and [L₁Sb]⁺[SbF₆]^- (4), respectively. Among these three compounds, 4 exhibits excellent catalytic activity towards the cyanosilylation of aldehydes and ketones.

Diplumbane-catalysed solvent- and additive-free hydroboration of ketones and aldehydes

A new diplumbane, namely [Pb(CH2SiMe3)3]2, was synthesized and structurally characterized. This group 14 element compound was found to catalyse the hydroboration of ketones and aldehydes under mild conditions without the use of additives and solvents, leading to the synthesis of a range of alcohols in high yields after hydrolysis.

Organoaluminum hydrides catalyzed hydroboration of carbonates, esters, carboxylic acids, and carbon dioxide

The reductive functionalization of the CO unit of carbonates, carboxylic acids, esters, and CO₂, respectively has received great attention since its introduction. This method is often used industrially for the synthesis of high value-added energy products in chemistry. This opens up a new way forward to reduce greenhouse gases and the consumption of traditional energy sources. Herein, we report an earth-abundant, cheap, and readily available aluminum dihydride, which can catalyze the reduction of a range of carbonates, esters, carboxylic acids, and CO₂, respectively in the presence of pinacolborane as a reducing agent. Moreover, we demonstrate that the reaction can proceed to obtain good yield products under mild conditions, with low catalyst loading and solvent-free reactions. The mechanism of the catalytic reduction of carbonates has been investigated.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

Aluminium complexes: next-generation catalysts for selective hydroboration

Organoboranes obtained from hydroboration reactions are one of the important classes of compounds that could be used to provide valuable synthons for follow-up transformations such as various functional group incorporation or C-C bond forming reactions. For decades, various transition metals were utilised as catalysts in such transformations. Recently Earth-abundant and less toxic main group metals have revived their importance in hydroboration chemistry, among which the suitable candidates are aluminium complexes as catalysts. In this regard, the development of aluminium complexes to achieve more robust catalytic systems with greater efficiency is appreciable.

A Sacrificial Iminato Ligand in the Catalytic Cyanosilylation of Ketones Promoted by Organoactinide Complexes

Four new complexes containing the bis(pentamethylcyclopentadienyl)thorium(IV) moiety, Cp*₂Th(L1)(Me) (Th2), Cp*₂Th(L2)(Me) (Th3), Cp*₂Th(L1)Cl (Th5), and Cp*₂Th(L2)Cl (Th6), were synthesized in quantitative yields via the protonolysis reaction of the metallocene precursor complexes Cp*₂Th(Me)₂ (Th1) and Cp*₂Th(Me)Cl (Th4) and the respective six- and seven-membered N-heterocyclic neutral imine ligands L1H and L2H. The molecular structures of all the complexes were established by single-crystal X-ray structure analyses. The synthesized complexes along with the precursor complexes were employed as catalysts for the cyanosilylation reaction of ketones with trimethylsilyl cyanide (Me₃SiCN). The removal of the iminato ligand is necessary to trigger the reaction, allowing the formation of the active catalyst.

Synthesis and characterization of rare-earth metallate amido complexes bearing 2-amidate-functionalized indolyl ligand and their application in the hydroboration of esters with pinacolborane

The reactions of 2-amidate-functionalized indolyl proligand 2-(2,6-iPr2C6H3NHC=O)C8H5NH (H2L) with [(Me3Si)2N]3RE(μ-Cl)Li(THF)3 were studied leading to the synthesis and characterization of a series of novel discrete trinuclear rare-earth metal metallate amido complexes...

Stannylene cyanide and its use as a cyanosilylation catalyst

The usefulness of stannylene cyanide (ATISnCN (5); ATI = aminotroponiminate) as a catalyst for the cyanosilylation of aldehydes is demonstrated.

Pincer-Supported Gallium Complexes for the Catalytic Hydroboration of Aldehydes, Ketones and Carbon Dioxide

Gallium hydrides stabilised by primary and secondary amines are scarce due to their propensity to eliminate dihydrogen. Consequently, their reactivity has received limited attention. The synthesis of two novel gallium hydride complexes HGa(THF)[ON(H)O] and H2 Ga[μ2 -ON(H)O]Ga[ON(H)O] ([ON(H)O]2- =N,N-bis(3,5-di-tert-butyl-2-phenoxy)amine) is described and their reactivity towards aldehydes and ketones is explored. These reactions afford alkoxide-bridged dimers through 1,2-hydrogallation reactions. The gallium hydrides can be regenerated through Ga-O/B-H metathesis from the reaction of such dimers with pinacol borane (HBpin) or 9-borabicyclo[3.3.1]nonane (9-BBN). These observations allowed us to target the catalytic reduction of carbonyl substrates (aldehydes, ketones and carbon dioxide) with low catalyst loadings at room temperature.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Hydroboration of carbonyls and imines by an iminophosphonamido tin(II) precatalyst

A novel three-coordinated tin(II) chloride [Ph₂P(N^tBu)₂]SnCl (1) supported by an N,N'-di-tert-butyliminophosphonamide having two phenyl groups on the phosphorus atom was synthesized by the reaction of the starting lithium iminophosphonamide [Ph₂P(N^tBu)₂]Li with SnCl₂·(dioxane) in toluene. The molecular structure of 1 was established by X-ray diffraction analysis. Tin(II) chloride 1 can act as an efficient precatalyst for the hydroboration of a wide variety of aldehydes, ketones, and imines at -10 °C. DFT calculations propose that hydroboration involves hydride transfer from the corresponding tin(II) hydride intermediate [Ph₂P(N^tBu)₂]SnH (10) to the carbonyl substrates via four-membered transition states (TS-12), affording three-coordinated tin(II) alkoxide intermediates [Ph₂P(N^tBu)₂]SnOR (13), followed by the stepwise reaction of 13 with HBpin (pin = pinacolate) to release the boronate esters and regenerate the tin(II) hydride 10. The stoichiometric reaction of the in site-generated 10 with benzophenone 2a at -10 °C led to the formation of 13. Moreover, 13 also stoichiometrically reacted with HBpin at -10 °C, forming the corresponding boronate ester 3a and 10 based on the ¹H NMR spectrum of the reaction mixture.

Constructing a triangular metallacycle with salen-Al and its application to a catalytic cyanosilylation reaction

A triangular metallosalen-based metallacycle was constructed in quantitative yield by the self-assembly of a 180° bis(pyridyl)salen-Al complex and a 60° diplatinum(II) acceptor in a 1 : 1 stoichiometric ratio. This metallacycle was then successfully used to cyanosilylate a wide range of benzaldehydes with trimethylsilyl cyanide.

Progressing the Frustrated Lewis Pair Abilities of N-Heterocyclic Carbene/GaR3 Combinations for Catalytic Hydroboration of Aldehydes and Ketones

Exploiting the steric incompatibility of the tris(alkyl)gallium GaR₃ (R = CH₂SiMe₃) and the bulky N-heterocyclic carbene (NHC) 1,3-bis(tert-butyl)imidazol-2-ylidene (ItBu), here we report the B-H bond activation of pinacolborane (HBPin), which has led to the isolation and structural authentication of a novel ion pair, [{ItBu-BPin}⁺{GaR₃(μ-H)GaR₃}^-] (2). Contrastingly, neither ItBu or GaR₃ was able to react with HBPin under the conditions of this study. Combining an NHC-stabilized borenium cation, [{ItBu-BPin}⁺], with an anionic dinuclear gallate, [{GaR₃(μ-H)GaR₃}^-], 2 proved to be unstable in solution at room temperature, evolving to the abnormal NHC-Ga complex [BPinC{{N(tBu)]₂CHCGa(R)₃}] (3). Interestingly, the structural isomer of 2, with the borenium cation residing at the C4 position of the carbene, [{aItBu-BPin}⁺{GaR₃(μ-H)GaR₃}^-] (4), was obtained when the abnormal NHC complex [aItBu·GaR₃] (1) was heated to 70 °C with HBPin, demonstrating that, under these forced conditions, it is possible to induce thermal frustration of the Lewis base/Lewis acid components of 1, enabling the activation of HBPin. Building on these stoichiometric studies, the frustrated Lewis pair (FLP) reactivity observed for the GaR₃/ItBu combination with HBPin could then be upgraded to catalytic regimes, allowing the efficient hydroboration of a range of aldehydes and ketones under mild reaction conditions. Mechanistic insights into the possible reaction pathway involved in this process have been gained by combining kinetic investigations with a comparative study of the catalytic capabilities of several gallium and borenium species related to 2. Disclosing a new cooperative partnership, reactions are proposed to occur via the formation of a highly reactive monomeric hydride gallate, [{ItBu-BPin}⁺{GaR₃(H)}^-] (I). Each anionic and cationic component of I plays a key role for success of the hydroboration, with the nucleophilic monomeric gallate anion favoring the transfer of its hydride to the C═O bond of the organic substate, which in turn is activated by coordination to the borenium cation.

n-Butyllithium as a highly efficient precatalyst for cyanosilylation of aldehydes and ketones

A highly efficient cyanosilylation protocol mediated by the easily available n-BuLi with a wide range of aldehydes and ketones was developed. This protocol features excellent yields with very low n-BuLi loadings (0.01-0.05 mol%) at room temperature, solvent-free process, good chemo-/regio-selectivity and functional group tolerance and scalability. A possible reaction pathway based upon stoichiometric reactivity was put forward.

Aluminum Amidinates: Insights into Alkyne Hydroboration

The mechanism of the aluminum-mediated hydroboration of terminal alkynes was investigated using a series of novel aluminum amidinate hydride and alkyl complexes bearing symmetric and asymmetric ligands. The new aluminum complexes were fully characterized and found to facilitate the formation of the (E)-vinylboronate hydroboration product, with rates and orders of reaction linked to complex size and stability. Kinetic analysis and stoichiometric reactions were used to elucidate the mechanism, which we propose to proceed via the initial formation of an Al-borane adduct. Additionally, the most unstable complex was found to promote decomposition of the pinacolborane substrate to borane (BH3), which can then proceed to catalyze the reaction. This mechanism is in contrast to previously reported aluminum hydride-catalyzed hydroboration reactions, which are proposed to proceed via the initial formation of an aluminum acetylide, or by hydroalumination to form a vinylboronate ester as the first step in the catalytic cycle.

Germyliumylidene: A Versatile Low Valent Group 14 Catalyst

Bis‐NHC stabilized germyliumylidenes [RGe(NHC)₂]⁺ are typically Lewis basic (LB) in nature, owing to their lone pair and coordination of two NHCs to the vacant p‐orbitals of the germanium center. However, they can also show Lewis acidity (LA) via Ge−C^NHC σ* orbital. Utilizing this unique electronic feature, we report the first example of bis‐NHC‐stabilized germyliumylidene [^MesTerGe(NHC)₂]Cl (1), (^MesTer=2,6‐(2,4,6‐Me₃C₆H₂)₂C₆H₃; NHC= IMe₄=1,3,4,5‐tetramethylimidazol‐2‐ylidene) catalyzed reduction of CO₂ with amines and arylsilane, which proceeds via its Lewis basic nature. In contrast, the Lewis acid nature of 1 is utilized in the catalyzed hydroboration and cyanosilylation of carbonyls, thus highlighting the versatile ambiphilic nature of bis‐NHC stabilized germyliumylidenes.

Bis(4-benzhydryl-benzoxazol-2-yl)methane - from a Bulky NacNac Alternative to a Trianion in Alkali Metal Complexes

A novel sterically demanding bis(4-benzhydryl-benzoxazol-2-yl)methane ligand 6 (4-BzhH2 BoxCH2 ) was gained in a straightforward six-step synthesis. Starting from this ligand monomeric [M(4-BzhH2 BoxCH)] (M=Na (7), K (81 )) and dimeric [{M(4-BzhH2 BoxCH)}2 ] (M=K (82 ), Rb (9), Cs (10)) alkali metal complexes were synthesised by deprotonation. Abstraction of the potassium ion of 8 by reaction with 18-crown-6 resulted in the solvent separated ion pair [{(THF)2 K@(18-crown-6)}{bis(4-benzhydryl-benzoxazol-2-yl)methanide}] (11), including the energetically favoured monoanionic (E,E)-(4-BzhH2 BoxCH) ligand. Further reaction of 4-BzhH2 BoxCH2 with three equivalents KH and two equivalents 18-crown-6 yielded polymeric [{(THF)2 K@(18-crown-6)}{K@(18-crown-6)K(4-Bzh BoxCH)}]n (n→∞) (12) containing a trianionic ligand. The neutral ligand and herein reported alkali complexes were characterised by single X-ray analyses identifying the latter as a promising precursor for low-valent main group complexes.

Synthesis, characterization, and reactivity of group 13 hydride complexes based on amido-amine ligands

The preparation of group 13 hydride complexes supported by N,N',N'-substituted 1,2-ethanediamines is reported. Dihydridoalanes LAlH2, for which the aggregation behaviour in solution and in the solid state is modulated by the steric bulk of the aryl substituent, readily react with elemental sulphur affording dinuclear aluminium sulphide complexes. Chloridohydrido trielanes LEHCl (E = B, Al, Ga) have been synthesized as well starting from the hydrochloride salts of the protio-ligands and the chlorido substituent within LAlHCl is readily replaced using Li[N(SiMe3)2]. Depending on the steric bulk of the ligand, the chloridohydrido gallane gives rise to a dinuclear gallium(ii) complex upon heating. All twelve complexes reported in here have been fully characterized and the solid-state structure of eleven complexes has been examined by means of single-crystal X-ray diffraction analysis.

Aluminum-Hydride-Catalyzed Hydroboration of Carbon Dioxide

This study describes the first use of a bis(phosphoranyl)methanido aluminum hydride, [ClC(PPh₂NMes)₂AlH₂] (2, Mes = Me₃C₆H₂), for the catalytic hydroboration of CO₂. Complex 2 was synthesized by the reaction of a lithium carbenoid [Li(Cl)C(PPh₂NMes)₂] with 2 equiv of AlH₃·NEtMe₂ in toluene at -78 °C. 2 (10 mol %) was able to catalyze the reduction of CO₂ with HBpin in C₆D₆ at 110 °C for 2 days to afford a mixture of methoxyborane [MeOBpin] (3a; yield: 78%, TOF: 0.16 h^-1) and bis(boryl)oxide [pinBOBpin] (3b). When more potent [BH₃·SMe₂] was used instead of HBpin, the catalytic reaction was extremely pure, resulting in the formation of trimethyl borate [B(OMe)₃] (3e) [catalytic loading: 1 mol % (10 mol %); reaction time: 60 min (5 min); yield: 97.6% (>99%); TOF: 292.8 h^-1 (356.4 h^-1)] and B₂O₃ (3f). Mechanistic studies show that the Al-H bond in complex 2 activated CO₂ to form [ClC(PPh₂NMes)₂Al(H){OC(O)H}] (4), which was subsequently reacted with BH₃·SMe₂ to form 3e and 3f, along with the regeneration of complex 2. Complex 2 also shows good catalytic activity toward the hydroboration of carbonyl, nitrile, and alkyne derivatives.

Highly Active Cooperative Lewis Acid-Ammonium Salt Catalyst for the Enantioselective Hydroboration of Ketones

Enantiopure secondary alcohols are fundamental high-value synthetic building blocks. One of the most attractive ways to get access to this compound class is the catalytic hydroboration. We describe a new concept for this reaction type that allowed for exceptional catalytic turnover numbers (up to 15 400), which were increased by around 1.5-3 orders of magnitude compared to the most active catalysts previously reported. In our concept an aprotic ammonium halide moiety cooperates with an oxophilic Lewis acid within the same catalyst molecule. Control experiments reveal that both catalytic centers are essential for the observed activity. Kinetic, spectroscopic and computational studies show that the hydride transfer is rate limiting and proceeds via a concerted mechanism, in which hydride at Boron is continuously displaced by iodide, reminiscent to an SN 2 reaction. The catalyst, which is accessible in high yields in few steps, was found to be stable during catalysis, readily recyclable and could be reused 10 times still efficiently working.

Boron: the first p-block element to fix inert N2 all the way to NH3

Boron, the fifth lightest element, in its sub-valent state in the form of borylene is able to activate inert dinitrogen all the way to the ammonium ion. The entire conversion has been established through a successive reduction-cum-protonation sequence, through the isolation of all intermediate species involving addition of two electrons and two protons. The activation of dinitrogen by the ambiphilic borylene is a parallel tactic to that of the well-known Haber-Bosch process. This chemistry can be potentially extrapolated to the activation of similar small molecules by low valent compounds of boron and other p-block elements.