Synthesis of Supported Ultrafine Non-noble Subnanometer-Scale Metal Particles Derived from Metal-Organic Frameworks as Highly Efficient Heterogeneous Catalysts

Synthesis and Characterization of MOF-Derived Structures: Recent Advances and Future Perspectives

Due to their facile tunability, metal-organic frameworks (MOFs) are employed as precursors and templates to construct advanced functional materials with unique and desired chemical, physical, mechanical, and morphological properties. By tuning MOF precursor composition and manipulating conversion processes, various MOF-derived materials commonly known as MOF derivatives can be constructed. The possibility of controlled and predictable properties makes MOF derivatives a preferred choice for numerous advanced technological applications. The innovative synthetic designs besides the plethora of interdisciplinary characterization approaches applicable to MOF derivatives provide the opportunity to perform a myriad of experiments to explore the performance and offer key insight to develop the next generation of advanced materials. Though there are many published works of literature describing various synthesis and characterization techniques of MOF derivatives, it is still not clear how the synthesis mechanism works and what are the best techniques to characterize these materials to probe their properties accurately. In this review, the recent development in synthesis techniques and mechanisms for a variety of MOF derivates such as MOF-derived metal oxides, porous carbon, composites/hybrids, and sulfides is summarized. Furthermore, the details of characterization techniques and fundamental working principles are summarized to probe the structural, mechanical, physiochemical, electrochemical, and electronic properties of MOF and MOF derivatives. The future trends and some remaining challenges in the synthesis and characterization of MOF derivatives are also discussed.

A general and robust Ni-based nanocatalyst for selective hydrogenation reactions at low temperature and pressure

Catalytic hydrogenations are important and widely applied processes for the reduction of organic compounds both in academic laboratories and in industry. To perform these reactions in sustainable and practical manner, the development and applicability of non-noble metal-based heterogeneous catalysts is crucial. Here, we report highly active and air-stable nickel nanoparticles supported on mesoporous silica (MCM-41) as a general and selective hydrogenation catalyst. This catalytic system allows for the hydrogenation of carbonyl compounds, nitroarenes, N-heterocycles, and unsaturated carbon─carbon bonds in good to excellent selectivity under very mild conditions (room temperature to 80°C, 2 to 10 bar H2). Furthermore, the optimal nickel/meso-silicon dioxide catalyst is reusable (4 cycles) without loss of its catalytic activity.

Double solvent synthesis of ultrafine Pt nanoparticles supported on halloysite nanotubes for chemoselective cinnamaldehyde hydrogenation

The development of highly active, low cost and durable catalysts for selective hydrogenation of aldehydes is imperative and challenging. In this contribution, we rationally constructed ultrafine Pt nanoparticles (Pt NPs) supported on the internal and external surfaces of halloysite nanotubes (HNTs) by a facile double solvent strategy. The influence of Pt loading, HNTs surface properties, reaction temperature, reaction time, H₂ pressure and solvents on the performance of cinnamaldehyde (CMA) hydrogenation was analyzed. The optimal catalysts with the Pt loading of 3.8 wt% and the average Pt particle size of 2.98 nm exhibited outstanding catalytic activity for the hydrogenation of CMA to cinnamyl alcohol (CMO) with 94.1% conversion of CMA and 95.1% selectivity to CMO. More impressively, the catalyst showed excellent stability during six cycles of use. The ultra-small size and high dispersion of Pt NPs, the negative charge on the outer surface of HNTs, the -OH on the inner surface of HNTs, and the polarity of anhydrous ethanol solvent account for the outstanding catalytic performance. This work offers a promising way to develop high-efficiency catalysts with high CMO selectivity and stability by combining clay mineral halloysite and ultrafine nanoparticles.

Cyclodextrin metal-organic frameworks and derivatives: recent developments and applications

While there is a tremendous amount of scientific research on metal organic frameworks (MOFs) for gas storage/separation, catalysis and energy storage, the development and application of biocompatible MOFs still poses major challenges. In general, they can be synthesised from various biocompatible linkers and metal ions but particularly cyclodextrins (CDs) as cyclic oligosaccharides are an astute choice for the former. Although the field of CD-MOF materials is still in the early stages and their design and fabrication comes with many hurdles, the benefits coming from CDs built in a porous framework are exciting. Versatile host-guest complexation abilities, high encapsulation capacity and hydrophilicity are among the valuable properties inherent to CDs and offer extended and novel applications to MOFs. In this review, we provide an overview of the state-of-the-art synthesis, design, properties and applications of these materials. Initially, a rationale for the preparation of CD-based MOFs is provided, based on the chemical and structural properties of CDs and including their advantages and disadvantages. Further on, the review exhaustively surveys CD-MOF based materials by categorising them into three sub-classes, namely (i) CD-MOFs, (ii) CD-MOF hybrids, obtained via combination with external materials, and (iii) CD-MOF-derived materials prepared under pyrolytic conditions. Subsequently, CD-based MOFs in practical applications, such as drug delivery and cancer therapy, sensors, gas storage, (enantiomer) separations, electrical devices, food industry, and agriculture, are discussed. We conclude by summarizing the state of the art in the field and highlighting some promising future developments of CD-MOFs.

Catalytic Hydrodeoxygenation of Guaiacol to Cyclohexanol over Bimetallic NiMo-MOF-Derived Catalysts

Lignin is an attractive renewable source of aromatics with a low effective hydrogen to carbon ratio (H/Ceff). The catalytic hydrodeoxygenation (HDO) of lignin-derived model compounds is a key strategy for lignin upgrading. In this work, the HDO of guaiacol, a typical lignin-derived compound, was carried out over metal–organic framework (MOF)-derived Ni-based catalysts. A monometallic Ni-MOF catalyst and different ratios of bimetallic NiMo-MOF catalysts were synthesized by a hydrothermal process, followed by a carbonization process. Among these catalysts, Ni3Mo1@C exhibited an excellent catalytic performance, affording a guaiacol conversion of 98.8% and a cyclohexanol selectivity of 66.8% at 240 °C and 2 MPa H2 for 4 h. The addition of Mo decreased the particle size of the spherical structure and improved the dispersion of metal particles. The synergistic effect between Ni and Mo was confirmed by various means, including ICP, XRD, SEM, TEM, and NH3-TPD analyses. In addition, the effect of the reaction temperature, time, and H2 pressure during the HDO process is discussed in detail.

Modulating the Chemical Microenvironment of Pt Nanoparticles within Ultrathin Nanosheets of Isoreticular MOFs for Enhanced Catalytic Activity

The catalytic activity of metal nanoparticles (MNPs) embedded in metal-organic frameworks (MOFs) is affected by the electronic interactions between MNPs and MOFs. In this report, we fabricate a series of ultrathin nanosheets of isoreticular MOFs (NMOFs) with different metal nodes as supports and successfully encapsulate Pt NPs within these NMOFs, affording Pt@NMOF-Co, Pt@NMOF-Ni₁Co₁, Pt@NMOF-Ni₃Co₁, and Pt@NMOF-Ni nanocomposites. The microchemical environment on the surface of Pt NPs can be modulated by varying the metal nodes of NMOFs. The catalytic activity of the nanocomposites toward liquid-phase hydrogenation of 1-hexene shows obvious difference, in which Pt@NMOF-Ni possesses the highest activity followed by Pt@NMOF-Ni₃Co₁, Pt@NMOF-Ni₁Co₁, and Pt@NMOF-Co in a decreasing order of activity. Obviously, increasing gradually the amount of Ni²⁺ nodes in the carriers can improve the catalytic activity. The difference of catalytic activity of the nanocomposites might originate from the distinct electron interactions between Pt NPs and NMOFs, as ascertained by X-ray photoelectron spectroscopy spectrum and density functional theory calculations. This work provides a rare example that the catalytic activity of MNPs could be controlled by accurately regulating the microchemical environment using ultrathin NMOFs as supports.

Interfacing with Fe-N-C Sites Boosts the Formic Acid Dehydrogenation of Palladium Nanoparticles

Hierarchical micro-/mesoporous carbons with abundant Fe-N-C sites were prepared through one-step carbonization of a metal-organic framework (MOF) with sodium iron ethylenediaminetetraacetic acid [NaFe(III)EDTA], which can facilitate the nucleation and growth of ultrafine (∼1.4 nm) and highly dispersed palladium nanoparticles (Pd NPs). Interfacing Pd NPs with Fe-N-C sites has been demonstrated for the first time to boost the heterogeneous catalysis of hydrogen production from formic acid, affording an ultrahigh turnover frequency (TOF) value of 7361 h^-1 at 323 K. The robust synergistic interactions between Pd NPs and Fe-N-C sites together with the small size effects of Pd NPs are responsible for the enhanced catalytic activity.

Ambient Hydrogenation and Deuteration of Alkenes Using a Nanostructured Ni-Core-Shell Catalyst

A general protocol for the selective hydrogenation and deuteration of a variety of alkenes is presented. Key to success for these reactions is the use of a specific nickel-graphitic shell-based core-shell-structured catalyst, which is conveniently prepared by impregnation and subsequent calcination of nickel nitrate on carbon at 450 °C under argon. Applying this nanostructured catalyst, both terminal and internal alkenes, which are of industrial and commercial importance, were selectively hydrogenated and deuterated at ambient conditions (room temperature, using 1 bar hydrogen or 1 bar deuterium), giving access to the corresponding alkanes and deuterium-labeled alkanes in good to excellent yields. The synthetic utility and practicability of this Ni-based hydrogenation protocol is demonstrated by gram-scale reactions as well as efficient catalyst recycling experiments.

Bioinspired Synthesis of Ce1-x O2:x%Cu2+ Nanobelts for CO Oxidation and Organic Dye Degradation

Ce_1-x O₂:x%Cu²⁺ nanobelts were bioinspired, designed, and fabricated using commercial filter papers as scaffolds by adding Cu(NO₃)₂ in the original sol solution of CeO₂ nanobelts, which display excellent catalyst properties for CO oxidation and photocatalytic activity for organic dyes. Compared with pure CeO₂, CuO belts were synthesized using the same method and the corresponding Ce_0.5O₂:50%Cu²⁺ bulk materials were synthesized without filter paper as scaffolds; the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts, especially Ce_0.5O₂:50%Cu²⁺ nanobelts, can decrease the reaction temperature of CO to CO₂ at 100 °C with the conversion rate of 100%, much lower than the formerly reported kinds of Ce_1-x O₂:x%Cu²⁺ catalysts. Meanwhile, the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts also display better photocatalytic activity for organic dyes. All of these results provide useful information for the potential applications of the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts in catalyst fields.

Metal-Organic Framework Based on α-Cyclodextrin Gives High Ethylene Gas Adsorption Capacity and Storage Stability

Two metal-organic framework (MOF) materials, that is, α-cyclodextrin (α-CD)-MOF-Na and α-CD-MOF-K, were successfully synthesized and exhibited excellent adsorption capacity and storage stability for ethylene gas. The ethylene encapsulation capacity of α-CD-MOF-Na and α-CD-MOF-K reached 47.4 and 52.9% (w/w), respectively, which was significantly higher than those of other materials reported such as α-CD and V-type starch. The release characteristics of ethylene inclusion complexes (ICs) were determined under different temperatures and relative humidity conditions. The ethylene gas could be stably encapsulated in α-CD-MOF-ethylene ICs at 25 °C for up to 30 days. The crystal structure of α-CD-MOFs was determined to explain their high capacity and stability for ethylene storage. Molecular simulation was used to model the location of ethylene molecules in α-CD-MOFs. Alpha-CD-MOF-Na and α-CD-MOF-K showed "8"-shaped and spindle-shaped cavity, respectively, which effectively adsorbed and stored the ethylene gas. Accelerated ripening experiments showed that 5 mg of α-CD-MOF ICs could ripen bananas within 4 days, with an effect similar to that of free ethylene gas. We suggest that α-CD-MOF materials are an excellent material for ethylene storage with potential application in industrial and agricultural areas.

Facile benzene reduction promoted by a synergistically coupled Cu-Co-Ce ternary mixed oxide

Hydrogenation of aromatic rings promoted by earth-abundant metal composites under mild conditions is an attractive and challenging subject in the long term.

Hydrogenation of aromatic rings promoted by earth-abundant metal composites under mild conditions is an attractive and challenging subject in the long term. In this work, a simple active site creation and stabilization strategy was employed to obtain a Cu⁺-containing ternary mixed oxide catalyst. Simply by pre-treatment of the ternary metal oxide precursor under a H₂ atmosphere, a Cu⁺-derived heterogeneous catalyst was obtained and denoted as Cu₁Co₅Ce₅O_x. The catalyst showed (1) high Cu⁺ species content, (2) a uniform distribution of Cu⁺ doped into the lattices of CoO_x and CeO₂, (3) formation of CoO_x/CuO_x and CeO₂/CuO_x interfaces, and (4) a mesoporous structure. These unique properties of Cu₁Co₅Ce₅O_x endow it with pretty high hydrogenation activity for aromatic rings under mild conditions (100 °C with 5 bar H₂), which is much higher than that of the corresponding binary counterparts and even exceeds the performance of commercial noble metal catalysts (e.g. Pd/C). The synergetic effect plays a crucial role in the catalytic procedure with CeO₂ functioning as a hydrogen dissociation and transfer medium, Cu⁺ hydrogenating the benzene ring and CoO_x stabilizing the unstable Cu⁺ species. This will unlock a new opportunity to design highly efficient earth-abundant metal-derived heterogeneous catalysts via interface interactions.

Nanocasting SiO2 into metal-organic frameworks imparts dual protection to high-loading Fe single-atom electrocatalysts

Single-atom catalysts (SACs) have sparked broad interest recently while the low metal loading poses a big challenge for further applications. Herein, a dual protection strategy has been developed to give high-content SACs by nanocasting SiO₂ into porphyrinic metal-organic frameworks (MOFs). The pyrolysis of SiO₂@MOF composite affords single-atom Fe implanted N-doped porous carbon (Fe_SA-N-C) with high Fe loading (3.46 wt%). The spatial isolation of Fe atoms centered in porphyrin linkers of MOF sets the first protective barrier to inhibit the Fe agglomeration during pyrolysis. The SiO₂ in MOF provides additional protection by creating thermally stable FeN₄/SiO₂ interfaces. Thanks to the high-density Fe_SA sites, Fe_SA-N-C demonstrates excellent oxygen reduction performance in both alkaline and acidic medias. Meanwhile, Fe_SA-N-C also exhibits encouraging performance in proton exchange membrane fuel cell, demonstrating great potential for practical application. More far-reaching, this work grants a general synthetic methodology toward high-content SACs (such as Fe_SA, Co_SA, Ni_SA).

Transitional MOFs: Exposing Metal Sites with Porosity for Enhancing Catalytic Reaction Performance

The exploration of transitional metal-organic frameworks (MOFs) is important because of their unique properties and promising applications. Hence, finding a suitable strategy to design transitional MOFs with different states has become a key issue. Herein, we develop a modulator-induced strategy for fabricating transitional MOFs with carboxylic ligands by building esterification reaction. The exposed metal sites, mesoporous systems, morphologies, crystallinities, and components of transitional MOFs can be finely controlled when different modulators are employed. Notably, the Pt/solid-transitional MOF catalyst with more mesopores enhances conversion in the hydrogenation reaction of n-hexene, and the flower-like-transitional MOF catalyst with more Lewis acid sites exhibits better performance in the cycloaddition reaction. Therefore, the modulator-induced strategy may provide significant inspiration for preparing various transitional MOFs by building suitable chemical reactions.

Metal organic frameworks for biomass conversion

This review narrates the recent developments on the catalytic applications of pristine metal–organic frameworks (MOFs), functionalized MOFs, guests embedded over MOFs and MOFs derived carbon composites for biomass conversion into platform chemicals.

Designed synthesis of WC-based nanocomposites as low-cost, efficient and stable electrocatalysts for the hydrogen evolution reaction

In this study, effectively conductive rGO (reduced graphene oxide) was used as the supporter both to promote charge transfer and to refine particle size of WC, to realize efficient and stable HER performance.

Sulfonic acid functionalized metal-organic framework (S-IRMOF-3): a novel catalyst for sustainable approach towards the synthesis of acrylonitriles

A sulfonic acid functionalized metal-organic framework (S-IRMOF-3) has been synthesized by dropwise addition of chlorosulfonic acid (0.5 mL) in IRMOF-3 (1 g) containing 20 mL of CHCl3 at 0 °C under simple stirring. The catalyst was applied in Knoevenagel condensation of various aromatic and hetero-aromatic aldehydes forming acrylonitrile derivatives. The catalyst was characterized thoroughly by using FT-IR, XRD, 13C MAS NMR, SEM, EDX, elemental mapping, TEM, BET, NH3-TPD and TGA/DTA techniques. The presence of characteristic bands at 1694 cm-1, 1254-769 cm-1 and 1033 cm-1 in the FT-IR spectrum, 2θ ≃ 6.7° and 9.8° in the XRD pattern and δ = 31.79, 39.55, 129.61, 131.46 (4C, CH), 133.54, 140.07 (2C), 167.71, 171.47 ppm (2C, 2C[double bond, length as m-dash]O) in the solid state 13C MAS NMR spectrum confirmed the successful formation of catalyst. This new eco-friendly approach resulted in a significant improvement in the synthetic efficiency (90-96% yield), high product purity, and minimizing the production of chemical wastes without using highly toxic reagents for the synthesis of acrylonitriles with selectivity for (Z)-isomer. Steric interactions seem to have an influence on the control of the Z-configurational isomers. By performing DFT calculations, it was found that the (Z)-isomer 3a is stabilized by 1.64 kcal mol-1 more than the (E)-isomer. The catalyst could be reused for five consecutive cycles without substantial loss in catalytic activity.

Facet-dependent photocatalytic hydrogen production of metal-organic framework NH2-MIL-125(Ti)

Facet-dependent catalytic activity of hard materials such as metals and metal oxides is well recognized in previous works. However, it has rarely been established for metal-organic frameworks (MOFs), possibly because the soft crystals of MOFs are conceptually different from the hard solids. In this work, the surface structure of the MOF NH2-MIL-125(Ti) has been investigated by density functional theory (DFT) calculations for the first time. These calculations predict that the {110} facet has a surface energy of 1.18 J m-2, which is superior to those of the {001}, {100} and {111} facets. This difference can be attributed to the larger percentage of exposed metal clusters, which can act as active sites in catalysis. Thus, we have devised and successfully obtained a series of nanoscaled NH2-MIL-125(Ti) MOFs with controlled facets both experimentally and theoretically. The sample containing the {110} facet exhibits the highest photocatalytic hydrogen production activity and apparent quantum yield, which are approximately three times those of the sample with a dominant {111} facet.

Preassembly Strategy To Fabricate Porous Hollow Carbonitride Spheres Inlaid with Single Cu-N3 Sites for Selective Oxidation of Benzene to Phenol

Developing single-atom catalysts with porous micro-/nanostructures for high active-site accessibility is of great significance but still remains a challenge. Herein, we for the first time report a novel template-free preassembly strategy to fabricate porous hollow graphitic carbonitride spheres with single Cu atoms mounted via thermal polymerization of supramolecular preassemblies composed of a melamine-Cu complex and cyanuric acid. Atomically dispersed Cu-N₃ moieties were unambiguously confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure spectroscopy. More importantly, this material exhibits outstanding catalytic performance for selective oxidation of benzene to phenol at room temperature, especially showing phenol selectivity (90.6 vs 64.2%) and stability much higher than those of the supported Cu nanoparticles alone, originating from the isolated unique Cu-N₃ sites in the porous hollow structure. An 86% conversion of benzene, with an unexpectedly high phenol selectivity of 96.7% at 60 °C for 12 h, has been achieved, suggesting a great potential for practical applications. This work paves a new way to fabricate a variety of single-atom catalysts with diverse graphitic carbonitride architectures.

Metal-Organic-Framework-Derived Co3 S4 Hollow Nanoboxes for the Selective Reduction of Nitroarenes

MOF-derived Co₃ S₄ /CN hollow nanoboxes (CN=nitrogen-doped carbon) was used to catalyze the chemoselective reduction of nitroarenes to anilines under mild reaction conditions with H₂ as the reducing agent. The catalyst provides high conversion efficiencies and selectivities for a variety of nitroarene substrates that contain electron-donating or electron-withdrawing substituents under mild reaction conditions (in methanol at 60 °C). Further, the nanobox inhibits both dehalogenation and vinyl hydrogenation reactions, which are common limitations of state-of-the-art Pd-based catalysts. Because the reactions result in pure aniline products, the need for separation by column chromatography is eliminated. The resulting anilines are easily separated from the methanolic reaction solution in just three simple steps (centrifugation, decantation, and drying). If employed in industrial processes, catalysts of this kind would significantly reduce the amount of waste organic solvent generated and thus satisfy the need for sustainable chemical processes.

Metal-Organic Frameworks as Platforms for Catalytic Applications

Metal-organic frameworks (MOFs), also called porous coordination polymers, represent a class of crystalline porous materials built from organic linkers and metal ions/clusters. The unique features of MOFs, including structural diversity and tailorability as well as high surface area, etc., enable them to be a highly versatile platform for potential applications in many fields. Herein, an overview of recent developments achieved in MOF catalysis, including heterogeneous catalysis, photocatalysis, and eletrocatalysis over MOFs and MOF-based materials, is provided. The active sites involved in the catalysts are particularly emphasized. The challenges, future trends, and prospects associated with MOFs and their related materials for catalysis are also discussed.

Facile synthesis of hollow hierarchical Ni@C nanocomposites with well-dispersed high-loading Ni nanoparticles embedded in carbon for reduction of 4-nitrophenol

Hollow hierarchical Ni@C nanocomposites with highly dispersed Ni nanoparticles (NPs) embedded in well-graphitized carbon matrix have been synthesized by solid-state pyrolysis of simple, well-defined organic-inorganic layered nickel hydroxide. The integration of highly dispersed Ni NPs, high Ni NPs content (up to ∼88.01 wt%), well-graphitized carbon as well as strong Ni/carbon interaction in the Ni@C make them display excellent catalytic activity and stable magnetic recyclability toward the reduction of 4-nitrophenol by NaBH4.

Effective Formaldehyde Capture by Green Cyclodextrin-Based Metal-Organic Framework

A kind of metal-organic framework made from γ-cyclodextrin (γ-CD) and potassium ions were explored as excellent formaldehyde (HCHO) absorbents. The adsorption capacity and speed of γ-CD-MOF-K are both about 9 times higher than those of activated carbon, which are attributed to the porous structure and synergistic effect of hydrogen bonding and host-guest interactions.

Catalysis of photooxidation reactions through transformation between Cu2+ and Cu+ in TiO2–Cu–MOF composites

Novel porous TiO₂@Cu₃(BTC)₂ composites, which were synthesized using ionic liquids (ILs) as solvents, exhibited excellent activity for photooxidation of styrene to 4-aryl tetralones and promoting the Glaser coupling reaction with O₂ under light irradiation.

A route to support Pt sub-nanoparticles on TiO2 and catalytic hydrogenation of quinoline to 1,2,3,4-tetrahydroquinoline at room temperature

We report a method to support Pt sub-nanoparticles on TiO₂.

In situ synthesis of sub-nanometer metal particles on hierarchically porous metal-organic frameworks via interfacial control for highly efficient catalysis

Sub-nanometer metal particle/hierarchically mesoporous metal–organic framework composites can be synthesized in situ in bio-based surfactant emulsion.

In this work, we developed a strategy to in situ synthesize sub-nanometer metal particle/hierarchically mesoporous metal–organic framework (MOF) composites in emulsion. In this route, water droplets in the emulsion acted as both a solvent of the metal precursors and a template for the hierarchical mesopores of MOFs, and the surfactant was an emulsifier and a reductant for generating metal particles. Au/Zn-MOFs (MOFs formed by Zn²⁺ and methylimidazole), Ru/Zn-MOFs, Pd/Zn-MOFs, and Au/Cu-MOFs (MOFs formed by Cu²⁺ and methylimidazole) were prepared using this method, in which ultrafine metal particles (e.g. 0.8 nm) were immobilized uniformly on hierarchically mesoporous MOFs. Au/Zn-MOFs and Au/Cu-MOFs showed outstanding catalytic performances for the selective aerobic oxidation of cyclohexene to 2-cyclohexen-1-one in the absence of an initiator, and Ru/Zn-MOFs were very active and selective for the hydrogenation of diphenyl sulfoxide to diphenyl sulfide. In addition, the catalysts were also very stable in the reactions.