Encapsulation of Nanoparticles with Statistical Copolymers with Different Surface Charges and Analysis of Their Interactions with Proteins and Cells

Encapsulation with polymers is a well-known strategy to stabilize and functionalize nanomaterials and tune their physicochemical properties. Amphiphilic copolymers are promising in this context, but their structural diversity and complexity also make understanding and predicting their behavior challenging. This is particularly the case in complex media which are relevant for intended applications in medicine and nanobiotechnology. Here, we studied the encapsulation of gold nanoparticles and quantum dots with amphiphilic copolymers differing in their charge and molecular structure. Protein adsorption to the nanoconjugates was studied with fluorescence correlation spectroscopy, and their surface activity was studied with dynamic interfacial tensiometry. Encapsulation of the nanoparticles without affecting their characteristic properties was possible with all tested polymers and provided good stabilization. However, the interaction with proteins and cells significantly depended on structural details. We identified statistical copolymers providing strongly reduced protein adsorption and low unspecific cellular uptake. Interestingly, different zwitterionic amphiphilic copolymers showed substantial differences in their resulting bio-repulsive properties. Among the polymers tested herein, statistical copolymers with sulfobetaine and phosphatidylcholine sidechains performed better than copolymers with carboxylic acid- and dimethylamino-terminated sidechains.

Quantification and biological evaluation of ZnxFe3-xO4 nanoparticle stiffness in a drug delivery system of MCF-7 cancer cells

The delivery of nanoparticles (NPs) to tumors remains challenging despite significant advancements in drug delivery technologies. Addressing this issue requires the establishment of quantitative and reliable criteria to evaluate the cellular absorption of NPs. The mechanical characteristics of NPs and their interaction with cells play a crucial role in cellular drug delivery by influencing cellular internalization. In particular, NPs' stiffness has emerged as a key factor affecting cellular uptake and viability. In this study, we synthesized ZnxFe3-xO4 NPs with varying Zn doping concentrations and conducted an extensive measurement process to investigate the impact of NP stiffness on cellular uptake and the viability of cancerous cells. Initially, the stiffness of the NPs was measured using two methods: single-molecule force spectrometry of atomic force microscopy (SMFS-AFM) and cation distribution as chemical structure analysis. The influence of NP stiffness on intracellular behavior was examined by assessing cellular uptake and viability at different time points during the incubation period. The results obtained from both stiffness measurement methods exhibited consistent trends. NPs with higher stiffness exhibited enhanced cellular uptake but exhibited reduced cellular viability compared to the lower-stiffness NPs. Our findings provide valuable insights into the influence of Zn doping concentration on the mechanical properties of ZnxFe3-xO4 NPs and their consequential impacts on cellular internalization. This study contributes to an improved comprehension of the mechanisms underlying cellular uptake and facilitates advancements in the field of drug transport, thereby enhancing the efficiency of NP-based drug delivery.

A sub-10-nm, folic acid-conjugated gold nanoparticle as self-therapeutic treatment of tubulointerstitial fibrosis

Nanomedicines for treating chronic kidney disease (CKD) are on the horizon, yet their delivery to renal tubules where tubulointerstitial fibrosis occurs remains inefficient. We report a folic acid-conjugated gold nanoparticle that can transport into renal tubules and treat tubulointerstitial fibrosis in mice with unilateral ureteral obstruction. The 3-nm gold core allows for the dissection of bio-nano interactions in the fibrotic kidney, ensures the overall nanoparticle (~7 nm) to be small enough for glomerular filtration, and naturally inhibits the p38α mitogen-activated protein kinase in the absence of chemical or biological drugs. The folic acids support binding to selected tubule cells with overexpression of folate receptors and promote retention in the fibrotic kidney. Upon intravenous injection, this nanoparticle can selectively accumulate in the fibrotic kidney over the nonfibrotic contralateral kidney at ~3.6% of the injected dose. Delivery to the fibrotic kidney depends on nanoparticle size and disease stage. Notably, a single injection of this self-therapeutic nanoparticle reduces tissue degeneration, inhibits genes related to the extracellular matrix, and treats fibrosis more effectively than standard Captopril therapy. Our data underscore the importance of constructing CKD nanomedicines based on renal pathophysiology.

Iron Oxide Nanocubes as a New Certified Reference Material for Nanoparticle Size Measurements

The rational design and increasing industrial use of nanomaterials require a reliable characterization of their physicochemical key properties like size, size distribution, shape, and surface chemistry. This calls for nanoscale reference materials (nanoRMs) for the validation and standardization of commonly used characterization methods closely matching real-world nonspherical nano-objects. This encouraged us to develop a nonspherical nanoRM of very small size consisting of 8 nm iron oxide nanocubes (BAM-N012) to complement spherical gold, silica, and polymer nanoRMs. In the following, the development and production of this nanoRM are highlighted including the characterization by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) as complementary methods for size and shape parameters, homogeneity and stability studies, and calculation of a complete uncertainty budget of the size features. The determination of the nanocubes' edge length by TEM and SAXS allows a method comparison. In addition, SAXS measurements can also provide the mean particle number density and the mass concentration. The certified size parameters, area equivalent circular diameter and square edge length, determined by TEM with a relative expanded uncertainty below 9%, are metrologically traceable to a natural constant for length, the very precisely known (111) lattice spacing of silicon. Cubic BAM-N012 qualifies as a certified nanoRM for estimating the precision and trueness, validation, and quality assurance of particle size and shape measurements with electron microscopy and SAXS as well as other sizing methods suitable for nanomaterials. The production of this new iron oxide nanocube RM presents an important achievement for the nanomaterial community, nanomaterial manufacturers, and regulators.

A General One-Step Synthesis of Alkanethiyl-Stabilized Gold Nanoparticles with Control over Core Size and Monolayer Functionality

In spite of widespread interest in the unique size-dependent properties and consequent applications of gold nanoparticles (AuNPs), synthetic protocols that reliably allow for independent tuning of surface chemistry and core size, the two critical determinants of AuNP properties, remain limited. Often, core size is inherently affected by the ligand structure in an unpredictable fashion. Functionalized ligands are commonly introduced using postsynthesis exchange procedures, which can be inefficient and operationally delicate. Here, we report a one-step protocol for preparing monolayer-stabilized AuNPs that is compatible with a wide range of ligand functional groups and also allows for the systematic control of core size. In a single-phase reaction using the mild reducing agent tert-butylamine borane, AuNPs that are compatible with solvents spanning a wide range of polarities from toluene to water can be produced without damaging reactive chemical functionalities within the small-molecule surface-stabilizing ligands. We demonstrate that the rate of reduction, which is easily controlled by adjusting the period over which the reducing agent is added, is a simple parameter that can be used irrespective of the ligand structure to adjust the core size of AuNPs without broadening the size distribution. Core sizes in the range of 2-10 nm can thus be generated. The upper size limit appears to be determined by the nature of each specific ligand/solvent pairing. This protocol produces high quality, functionally sophisticated nanoparticles in a single step. By combining the ability to vary size-related nanoparticle properties with the option to incorporate reactive functional groups at the nanoparticle-solvent interface, it is possible to generate chemically reactive colloidal building blocks from which more complex nanoparticle-based devices and materials may subsequently be constructed.

Nanosized metal-organic frameworks as unique platforms for bioapplications

Metal-organic frameworks (MOFs) are extremely versatile materials, which serve to create platforms with exceptional porosity and specific reactivities. The production of MOFs at the nanoscale (NMOFs) offers the possibility of creating innovative materials for bioapplications as long as they maintain the properties of their larger counterparts. Due to their inherent chemical versatility, synthetic methods to produce them at the nanoscale can be combined with inorganic nanoparticles (NPs) to create nanocomposites (NCs) with one-of-a-kind features. These systems can be remotely controlled and can catalyze abiotic reactions in living cells, which have the potential to stimulate further research on these nanocomposites as tools for advanced therapies.

Nanocomposite Bioprinting for Tissue Engineering Applications

Bioprinting aims to provide new avenues for regenerating damaged human tissues through the controlled printing of live cells and biocompatible materials that can function therapeutically. Polymeric hydrogels are commonly investigated ink materials for 3D and 4D bioprinting applications, as they can contain intrinsic properties relative to those of the native tissue extracellular matrix and can be printed to produce scaffolds of hierarchical organization. The incorporation of nanoscale material additives, such as nanoparticles, to the bulk of inks, has allowed for significant tunability of the mechanical, biological, structural, and physicochemical material properties during and after printing. The modulatory and biological effects of nanoparticles as bioink additives can derive from their shape, size, surface chemistry, concentration, and/or material source, making many configurations of nanoparticle additives of high interest to be thoroughly investigated for the improved design of bioactive tissue engineering constructs. This paper aims to review the incorporation of nanoparticles, as well as other nanoscale additive materials, to printable bioinks for tissue engineering applications, specifically bone, cartilage, dental, and cardiovascular tissues. An overview of the various bioinks and their classifications will be discussed with emphasis on cellular and mechanical material interactions, as well the various bioink formulation methodologies for 3D and 4D bioprinting techniques. The current advances and limitations within the field will be highlighted.

Bioinspired Polyethylene Glycol Coatings for Reduced Nanoparticle-Protein Interactions

Nanoparticles (NPs) and other engineered nanomaterials have great potential as nanodrugs or nanomedical devices for biomedical applications. However, the adsorption of proteins in blood circulation or similar physiological fluids can significantly alter the surface properties and therapeutic response induced by most nanomaterials. For example, interaction with proteins can change the bloodstream circulation time and availability of therapeutic NPs or hinder the accumulation in their desired target organs. Proteins can also trigger or prevent agglomeration. By combining experimental and computational approaches, we have developed NPs carrying polyethylene glycol (PEG) polymeric coatings that mimic the surface charge distribution of proteins typically found in blood, which are known to show low aggregation under normal blood conditions. Here, we show that NPs with coatings based on apoferritin or human serum albumin display better antifouling properties and weaker protein interaction compared to similar NPs carrying conventional PEG polymeric coatings.

Tailored polyethylene glycol grafting on porous nanoparticles for enhanced targeting and intracellular siRNA delivery

Surface functionalization of nanoparticles with polyethylene glycol (PEG) has been widely demonstrated as an anti-opsonization strategy to reduce protein corona formation which is one of the major concerns affecting target receptor recognition. However, excessive surface passivation with PEG can lead to the strong inhibition of cellular uptake and less efficient binding to target receptors, resulting in reduced potential of targeted delivery. To improve specific cell targeting while reducing the nonspecific protein adsorption, a secondary packaging of the nanoparticles with shorter PEG chains, making the targeting ligands densely stretched out for enhanced molecular recognition is demonstrated. Particularly, we report the tailored surface functionalization of the porous nanoparticles that require the stealth shielding onto the open-pore region. This study shows that, in addition to the surface chemistry, the conformation of the PEG layers controls the cellular interaction of nanoparticles. Since the distance between neighboring PEG chains determines the structural conformation of the grafted PEG molecules, tailored PEG combinations can efficiently resist the adsorption of serum proteins onto the pores by transitioning the conformation of the PEG chains, thus significantly enhance the targeting efficiency (>5-fold). The stretched brush PEG conformation with secondary packaging of shorter PEG chains could be a promising anti-opsonization and active targeting strategy for efficient intracellular delivery of nanoparticles.

Pathways Related to NLRP3 Inflammasome Activation Induced by Gold Nanorods

The widespread and increasing use of engineered nanomaterials (ENM) increases the risk of human exposure, generating concern that ENM may provoke adverse health effects. In this respect, their physicochemical characteristics are critical. The immune system may respond to ENM through inflammatory reactions. The NLRP3 inflammasome responds to a wide range of ENM, and its activation is associated with various inflammatory diseases. Recently, anisotropic ENM have become of increasing interest, but knowledge of their effects on the immune system is still limited. The objective of the study was to compare the effects of gold ENM of different shapes on NLRP3 inflammasome activation and related signalling pathways. Differentiated THP-1 cells (wildtype, ASC- or NLRP3-deficient), were exposed to PEGylated gold nanorods, nanostars, and nanospheres, and, thus, also different surface chemistries, to assess NLRP3 inflammasome activation. Next, the exposed cells were subjected to gene expression analysis. Nanorods, but not nanostars or nanospheres, showed NLRP3 inflammasome activation. ASC- or NLRP3-deficient cells did not show this effect. Gene Set Enrichment Analysis revealed that gold nanorod-induced NLRP3 inflammasome activation was accompanied by downregulated sterol/cholesterol biosynthesis, oxidative phosphorylation, and purinergic receptor signalling. At the level of individual genes, downregulation of Paraoxonase-2, a protein that controls oxidative stress, was most notable. In conclusion, the shape and surface chemistry of gold nanoparticles determine NLRP3 inflammasome activation. Future studies should include particle uptake and intracellular localization.

Surface charge-dependent mitochondrial response to similar intracellular nanoparticle contents at sublethal dosages

Background

Considering the inevitability for humans to be frequently exposed to nanoparticles (NPs), understanding the biosafety of NPs is important for rational usage. As an important part of the innate immune system, macrophages are widely distributed in vital tissues and are also a dominant cell type that engulfs particles. Mitochondria are one of the most sensitive organelles when macrophages are exposed to NPs. However, previous studies have mainly reported the mitochondrial response upon high-dose NP treatment. Herein, with gold nanoparticles (AuNPs) as a model, we investigated the mitochondrial alterations induced by NPs at a sublethal concentration.

Results

At a similar internal exposure dose, different AuNPs showed distinct degrees of effects on mitochondrial alterations, including reduced tubular mitochondria, damaged mitochondria, increased reactive oxygen species, and decreased adenosine triphosphate. Cluster analysis, two-way ANOVA, and multiple linear regression suggested that the surface properties of AuNPs were the dominant determinants of the mitochondrial response. Based on the correlation analysis, the mitochondrial response was increased with the change in zeta potential from negative to positive. The alterations in mitochondrial respiratory chain proteins indicated that complex V was an indicator of the mitochondrial response to low-dose NPs.

Conclusion

Our current study suggests potential hazards of modified AuNPs on mitochondria even under sublethal dose, indicates the possibility of surface modification in biocompatibility improvement, and provides a new way to better evaluation of nanomaterials biosafety.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00429-8.

Analyzing the surface of functional nanomaterials-how to quantify the total and derivatizable number of functional groups and ligands

Functional nanomaterials (NM) of different size, shape, chemical composition, and surface chemistry are of increasing relevance for many key technologies of the twenty-first century. This includes polymer and silica or silica-coated nanoparticles (NP) with covalently bound surface groups, semiconductor quantum dots (QD), metal and metal oxide NP, and lanthanide-based NP with coordinatively or electrostatically bound ligands, as well as surface-coated nanostructures like micellar encapsulated NP. The surface chemistry can significantly affect the physicochemical properties of NM, their charge, their processability and performance, as well as their impact on human health and the environment. Thus, analytical methods for the characterization of NM surface chemistry regarding chemical identification, quantification, and accessibility of functional groups (FG) and surface ligands bearing such FG are of increasing importance for quality control of NM synthesis up to nanosafety. Here, we provide an overview of analytical methods for FG analysis and quantification with special emphasis on bioanalytically relevant FG broadly utilized for the covalent attachment of biomolecules like proteins, peptides, and oligonucleotides and address method- and material-related challenges and limitations. Analytical techniques reviewed include electrochemical titration methods, optical assays, nuclear magnetic resonance and vibrational spectroscopy, as well as X-ray based and thermal analysis methods, covering the last 5-10 years. Criteria for method classification and evaluation include the need for a signal-generating label, provision of either the total or derivatizable number of FG, need for expensive instrumentation, and suitability for process and production control during NM synthesis and functionalization.

Computational model of silica nanoparticle penetration into tumor spheroids: Effects of methoxy and carboxy PEG surface functionalization and hyperthermia

Drug delivery to tumors suffers from poor solubility, specificity, diffusion through the tumor micro-environment and nonoptimal interactions with components of the extracellular matrix and cell surface receptors. Nanoparticles and drug-polymer complexes address many of these problems. However, large size exasperates the problem of slow diffusion through the tumor. Three-dimensional tumor spheroids are good models to evaluate approaches to mitigate these difficulties and aid in design strategies to improve the delivery of drugs to treat cancer effectively. Diffusion of drug carriers is highly dependent on cell uptake rate parameters (association/dissociation) and temperature. Hyperthermia increases molecular transport and is known to act synergistically with chemotherapy to improve treatment. This study presents a new inverse estimation approach based on Bayesian probability for estimating nanoparticle cell uptake rates from experiments. The parameters were combined with a finite element computational model of nanoparticle transport under hyperthermia conditions to explore its effect on tumor porosity, diffusion and particle binding (association and dissociation) at cell surfaces. Carboxy-PEG-silane (cPEGSi) nanoparticles showed higher cell uptake compared to methoxy-PEG-silane (mPEGSi) nanoparticles. Simulations were consistent with experimental results from Skov-3 ovarian cancer spheroids. Amorphous silica (cPEGSi) nanoparticles (58 nm) concentrated at the periphery of the tumor spheroids at 37°C but mild hyperthermia (43°C) increased nanoparticle penetration. Thus, hyperthermia may enhance cancer treatment by improving blood delivery to tumors, enhancing extravasation and penetration into tumors, trigger release of drug from the carrier at the tumor site and possibly lead to synergistic anti-cancer activity with the drug.

Aerogelation of Polymer-Coated Photoluminescent, Plasmonic, and Magnetic Nanoparticles for Biosensing Applications

Macroscopic materials with nanoscopic properties have recently been synthesized by self-assembling defined nanoparticles to form self-supported networks, so-called aerogels. Motivated by the promising properties of this class of materials, the search for versatile routes toward the controlled assembly of presynthesized nanoparticles into such ultralight macroscopic materials has become a great interest. Overcoating procedures of colloidal nanoparticles with polymers offer versatile means to produce aerogels from nanoparticles, regardless of their size, shape, or properties while retaining their original characteristics. Herein, we report on the surface modification and assembly of various building blocks: photoluminescent nanorods, magnetic nanospheres, and plasmonic nanocubes with particle sizes between 5 and 40 nm. The polymer employed for the coating was poly(isobutylene-alt-maleic anhydride) modified with 1-dodecylamine side chains. The amphiphilic character of the polymer facilitates the stability of the nanocrystals in aqueous media. Hydrogels are prepared via triggering the colloidally stable solutions, with aqueous cations acting as linkers between the functional groups of the polymer shell. Upon supercritical drying, the hydrogels are successfully converted into macroscopic aerogels with highly porous, open structure. Due to the noninvasive preparation method, the nanoscopic properties of the building blocks are retained in the monolithic aerogels, leading to the powerful transfer of these properties to the macroscale. The open pore system, the universality of the polymer-coating strategy, and the large accessibility of the network make these gel structures promising biosensing platforms. Functionalizing the polymer shell with biomolecules opens up the possibility to utilize the nanoscopic properties of the building blocks in fluorescent probing, magnetoresistive sensing, and plasmonic-driven thermal sensing.

Cytotoxicity Induction by the Oxidative Reactivity of Nanoparticles Revealed by a Combinatorial GNP Library with Diverse Redox Properties

It is crucial to establish relationship between nanoparticle structures (or properties) and nanotoxicity. Previous investigations have shown that a nanoparticle's size, shape, surface and core materials all impact its toxicity. However, the relationship between the redox property of nanoparticles and their toxicity has not been established when all other nanoparticle properties are identical. Here, by synthesizing an 80-membered combinatorial gold nanoparticle (GNP) library with diverse redox properties, we systematically explored this causal relationship. The compelling results revealed that the oxidative reactivity of GNPs, rather than their other physicochemical properties, directly caused cytotoxicity via induction of cellular oxidative stress. Our results show that the redox diversity of nanoparticles is regulated by GNPs modified with redox reactive ligands.

Ratiometric Antifouling Electrochemical Biosensors Based on Multifunctional Peptides and MXene Loaded with Au Nanoparticles and Methylene Blue

A universal strategy for the construction of ratiometric antifouling electrochemical biosensors was developed based on multifunctional peptides and 2D nanomaterial MXene loaded with gold nanoparticles (AuNPs) and methylene blue (MB). The nanocomposite of MXene loaded with AuNPs and MB (MXene-Au-MB) exhibited excellent conductivity, where the AuNPs were able to capture biomolecules containing sulfhydryl terminus, and the MB molecules were used to generate electrochemical signal. The MXene-Au-MB was fixed on the electrode surface by Nafion, and the anchored peptide captured the electrochemical signal probe carboxyl-modified ferrocene (Fc) to construct an electrochemical biosensor. The multifunctional peptide containing the anchoring, antifouling, and recognizing sequences endowed the sensing surface not only the assaying function but also the capability to resist nonspecific adsorption from complex samples. In the biosensing system, with the increase in the target concentration, the electrochemical signal of MB remained constant, whereas the electrochemical signal of Fc gradually decreased, and the ratiometric detection strategy greatly improved the accuracy of the biosensor. In the presence of a model target prostate-specific antigen (PSA), the recognizing sequence was recognized and cleaved, and the ratiometric signal of Fc and MB indicated the concentration of PSA accurately and sensitively, with a detection range from 5 pg/mL to 10 ng/mL and a limit of detection of 0.83 pg/mL. Electrochemical biosensors based on the MXene-Au-MB and multifunctional peptides possessed high selectivity, accuracy, and sensitivity even in real complex biological samples because of the excellent antifouling ability of the peptide. More importantly, the assaying of other targets can be easily realized with a similar biosensing strategy by changing the recognition sequence of the multifunctional peptide, and the detection of thrombin (TB) has also been achieved in this work.

Optimizing the Polymer Cloak for Upconverting Nanoparticles: An Evaluation of Bioactivity and Optical Performance

The ability of upconversion nanoparticles (UCNPs) to convert low-energy near-infrared (NIR) light into high-energy visible-ultraviolet light has resulted in their development as novel contrast agents for biomedical imaging. However, UCNPs often succumb to poor colloidal stability in aqueous media, which can be conquered by decorating the nanoparticle surface with polymers. The polymer cloak, therefore, plays an instrumental role in ensuring good stability in biological media. This study aims to understand the relationship between the length and grafting density of the polymer shell on the physicochemical and biological properties of these core-shell UCNPs. Poly(ethylene glycol) methyl ether methacrylate block ethylene glycol methacrylate phosphate (PPEGMEMA_n-b-PEGMP₃) with different numbers of PEGMEMA repeating units (26, 38, and 80) was prepared and attached to the UCNPs via the phosphate ligand of the poly(ethylene glycol methacrylate phosphate) (PEGMP) block at different polymer densities. The in vitro and in vivo protein corona, cellular uptake in two-dimensional (2D) monolayer and three-dimensional (3D) multicellular tumor spheroid (MCTS) models, and in vivo biodistribution in mice were evaluated. Furthermore, the photoluminescence of single-polymer-coated UCNPs was compared in solid state and cancer cells using laser scanning confocal microscopy (LSCM). Our results showed that the bioactivity and luminescence properties are chain length and grafting density dependent. The UCNPs coated with the longest PPEGMEMA chain, grafted at low brush density, were able to reduce the formation of the protein corona in vitro and in vivo, while these UCNPs also showed the brightest upconversion luminescence in the solid state. Moreover, these particular polymer-coated UCNPs showed enhanced cellular uptake, extended in vivo blood circulation time, and more accumulation in the liver, brain, and heart.

Leveraging the modularity of biomaterial carriers to tune immune responses

Biomaterial carriers offer modular features to control the delivery and presentation of vaccines and immunotherapies. This tunability is a distinct capability of biomaterials. Understanding how tunable material features impact immune responses is important to improve vaccine and immunotherapy design, as well as clinical translation. Here we discuss the modularity of biomaterial properties as a means of controlling encounters with immune signals across scales - tissue, cell, molecular, and time - and ultimately, to direct stimulation or regulation of immune function. We highlight these advances using illustrations from recent literature across infectious disease, cancer, and autoimmunity. As the immune engineering field matures, informed design criteria could support more rational biomaterial carriers for vaccination and immunotherapy.

Assessment of Polyethylene Glycol-Coated Gold Nanoparticle Toxicity and Inflammation In Vivo Using NF-κB Reporter Mice

Polyethylene glycol (PEG) coating of gold nanoparticles (AuNPs) improves AuNP distribution via blood circulation. The use of PEG-coated AuNPs was shown to result in acute injuries to the liver, kidney, and spleen, but long-term toxicity has not been well studied. In this study, we investigated reporter induction for up to 90 days in NF-κB transgenic reporter mice following intravenous injection of PEG-coated AuNPs. The results of different doses (1 and 4 μg AuNPs per gram of body weight), particle sizes (13 nm and 30 nm), and PEG surfaces (methoxyl- or carboxymethyl-PEG 5 kDa) were compared. The data showed up to 7-fold NF-κB reporter induction in mouse liver from 3 h to 7 d post PEG-AuNP injection compared to saline-injected control mice, and gradual reduction to a level similar to control by 90 days. Agglomerates of PEG-AuNPs were detected in liver Kupffer cells, but neither gross pathological abnormality in liver sections nor increased activity of liver enzymes were found at 90 days. Injection of PEG-AuNPs led to an increase in collagen in liver sections and elevated total serum cholesterol, although still within the normal range, suggesting that inflammation resulted in mild fibrosis and affected hepatic function. Administrating PEG-AuNPs inevitably results in nanoparticles entrapped in the liver; thus, further investigation is required to fully assess the long-term impacts by PEG-AuNPs on liver health.

Systematic and Quantitative Structure-Property Relationships of Polymeric Medical Nanomaterials: From Systematic Synthesis and Characterization to Computer Modeling and Nano-Bio Interaction and Toxicity

Nanomaterials allow designing targeted therapies, facilitate molecular diagnostics, and are therefore enabling platforms for personalized medicine. A systematic science and a predictive understanding of molecular/supramolecular structure relationships and nanoparticle structure/biological property relationships are needed for rational design and clinical progress but are hampered by the anecdotal nature, nonsystematic and nonrepresentative nanomaterial assortment, and oligo-disciplinary approach of many publications. Here, we find that a systematic and comprehensive multidisciplinary approach to production and exploration of molecular-structure/nanostructure relationship and nano-bio structure/function relationship of medical nanomaterials can be achieved by combining systematic chemical synthesis, thorough physicochemical analysis, computer modeling, and biological experiments, as shown in a nanomaterial family of amphiphilic, micelle-forming oxazoline/siloxane block copolymers suited for the clinical application. This comprehensive interdisciplinary approach leads to improved understanding of nanomaterial structures, allows good insights into binding modes for the nanomaterial protein corona, induces the design of minimal cell-binding materials, and yields rational strategies to avoid toxicity. Thus, this work contributes to a systematic and scientific basis for rational design of medical nanomaterials.

Role of gold nanoparticles in advanced biomedical applications

Gold nanoparticles (GNPs) have generated keen interest among researchers in recent years due to their excellent physicochemical properties. In general, GNPs are biocompatible, amenable to desired functionalization, non-corroding, and exhibit size and shape dependent optical and electronic properties. These excellent properties of GNPs exhibit their tremendous potential for use in diverse biomedical applications. Herein, we have evaluated the recent advancements of GNPs to highlight their exceptional potential in the biomedical field. Special focus has been given to emerging biomedical applications including bio-imaging, site specific drug/gene delivery, nano-sensing, diagnostics, photon induced therapeutics, and theranostics. We have also elaborated on the basics, presented a historical preview, and discussed the synthesis strategies, functionalization methods, stabilization techniques, and key properties of GNPs. Lastly, we have concluded this article with key findings and unaddressed challenges. Overall, this review is a complete package to understand the importance and achievements of GNPs in the biomedical field.

Toward Diffusion Measurements of Colloidal Nanoparticles in Biological Environments by Nuclear Magnetic Resonance

Protein corona formation on the surface of nanoparticles (NPs) is observed in situ by measuring diffusion coefficients of the NPs under the presence of proteins with a ¹⁹ F nuclear magnetic resonance (NMR) based methodology. Formation of a protein corona reduces the diffusion coefficient of the NPs, based on an increase in their effective hydrodynamic radii. With this methodology it is demonstrated that the apparent dissociation constant of protein-NP complexes may vary over at least nine orders of magnitude for different types of proteins, in line with the Vroman effect. Using this methodology, the interaction between one type of protein and one type of nanoparticle can be studied quantitatively. Due to the NMR-based detection, this methodology has no interference by absorption/scattering effects, by which optical detection schemes are affected. By using the potential of the NMR chemical shift, the detection of multiple ¹⁹ F signals simultaneously opens the possibility to study the diffusion of several NPs at the same time. The ¹⁹ F labeling of the NPs has negligible effect on their acute toxicity and moderate effect on NPs uptake by cells.

Stiffness of HIV-1 Mimicking Polymer Nanoparticles Modulates Ganglioside-Mediated Cellular Uptake and Trafficking

The monosialodihexosylganglioside, GM3, and its binding to CD169 (Siglec-1) have been indicated as key factors in the glycoprotein-independent sequestration of the human immunodeficiency virus-1 (HIV-1) in virus-containing compartments (VCCs) in myeloid cells. Here, lipid-wrapped polymer nanoparticles (NPs) are applied as a virus-mimicking model to characterize the effect of core stiffness on NP uptake and intracellular fate triggered by GM3-CD169 binding in macrophages. GM3-functionalized lipid-wrapped NPs are assembled with poly(lactic-co-glycolic) acid (PLGA) as well as with low and high molecular weight polylactic acid (PLAlMW and PLAhMW) cores. The NPs have an average diameter of 146 ± 17 nm and comparable surface properties defined by the self-assembled lipid layer. Due to differences in the glass transition temperature, the Young's modulus (E) differs substantially under physiological conditions between PLGA (E PLGA = 60 ± 32 MPa), PLAlMW (E PLA lMW = 86 ± 25 MPa), and PLAhMW (E PLA hMW = 1.41 ± 0.67 GPa) NPs. Only the stiff GM3-presenting PLAhMW NPs but not the softer PLGA or PLAlMW NPs avoid a lysosomal pathway and localize in tetraspanin (CD9)-positive compartments that resemble VCCs. These observations suggest that GM3-CD169-induced sequestration of NPs in nonlysosomal compartments is not entirely determined by ligand-receptor interactions but also depends on core stiffness.

Controlled reversible assembly of gold nanoparticles as a new colorimetric and sensitive detection of glucose-6-phosphate dehydrogenase deficiency

Recently, several studies have examined possible applications of nanoparticles for the development of electronic and optical sensors. The plasmon absorbance of gold nanoparticles has been used extensively to study biomolecular processes, including nicotinamide adenine dinucleotide/nicotinamide adenine dinucleotide phosphate-dependent enzymatic reactions. In this report, we describe the development of gold nanoparticles as a new colorimetric and sensitive detection method of glucose-6-phosphate dehydrogenase deficiency by means of controlled reversible assembly of gold nanoparticles. 3-nm polyvinylpyrrolidone/N,N'-dimethylaminopyridine-stabilized gold nanoparticles were synthesized, characterized and applied for an in vitro activity assay of 11 recombinant human glucose-6-phosphate dehydrogenase variants. Differences in the activity of the glucose-6-phosphate dehydrogenase variants from different deficiency classes were readily detected using the synthesized gold nanoparticles. The developed method can be easily distinguished with color change by naked eye for the detection of glucose-6-phosphate dehydrogenase deficiency. Moreover, we are the first to propose the segregation mechanism of polyvinylpyrrolidone/N,N'-dimethylaminopyridine-stabilized gold nanoparticles by reduced nicotinamide adenine dinucleotide phosphate. The method enables visual detection of glucose-6-phosphate dehydrogenase deficiency, which could be further developed for diagnostic testing of glucose-6-phosphate dehydrogenase deficiency.

Nanostructured polymer assemblies stabilize photoactivatable anticancer ruthenium complexes under physiological conditions

Photoactivatable ruthenium (Ru) complexes are promising compounds for anticancer phototherapy. They must be stable under physiological conditions before they are transported to cancer cells. In this paper, we systematically studied the stabilities of two Ru-containing block copolymers (Ru complexes as side group or in main chain, respectively) and their corresponding Ru complexes in different media, including saline, bovine serum albumin (BSA) solution, Dulbecco's Modified Eagle's Medium (DMEM, pH 6.5) and DMEM (pH 5.5) with 1.0 mM glutathione (GSH). Their stabilities were studied by monitoring the metal-to-ligand charge transfer (MLCT) bands of the Ru moieties via UV-Vis absorption spectroscopy. The MLCT bands of Ru complexes changed to varying degrees within a day in the above-mentioned media, indicating that they were instable. In contrast, the MLCT bands of Ru-containing polymer assemblies did not change significantly under the same conditions. These results showed that the self-assembled nanostructures protected the Ru moieties and improved their stability. In addition, these nanostructured polymer assemblies could be activated by red light. Therefore, the studied Ru-containing polymer assemblies are more suitable for in vivo applications than their low-molecular weight analogues.

Synthesis of gold-silica core-shell nanoparticles by pulsed laser ablation in liquid and their physico-chemical properties towards photothermal cancer therapy

Due to the increasing scientific and biomedical interest in various nanoparticles (NPs) with excellent properties and the onset of their commercial use, a convenient and adjustable physical method for improved efficiency needs to be used for enabling their tech-scale production. Recently, great progress has been made in the large-scale production of NPs with a simple structure by pulsed laser ablation in liquid (PLAL). In this work, we synthesized gold-silica core-shell NPs by improved PLAL and provided a guide on how to investigate their physico-chemical properties and association with biological effects towards cancer photothermal therapy (PTT). By means of this method, reproducible and scalable liquid phase NPs with less toxicity and good stability can be realized for tech-scale production based on its further adjustment and modification. Moreover, a more complete investigation of the associations between the physico-chemical properties of functional NPs with complex structure and their biological effects may enable more targeted NPs towards specific requirements of biomedical applications.

Effect of elasticity on the phagocytosis of micro/nanoparticles

A broad range of investigation methods and frameworks are used to better study the elasticity of various micro/nanoparticles (MNPs) with different properties and to explore the effect of such properties on their interactions with biological species.

Nitrone-Modified Gold Nanoparticles: Synthesis, Characterization, and Their Potential as 18F-Labeled Positron Emission Tomography Probes via I-SPANC

A novel bioorthogonal gold nanoparticle (AuNP) template displaying interfacial nitrone functional groups for bioorthogonal interfacial strain-promoted alkyne-nitrone cycloaddition reactions has been synthesized. These nitrone-AuNPs were characterized in detail using 1H nuclear magnetic resonance spectroscopy, transmission electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy, and a nanoparticle raw formula was calculated. The ability to control the conjugation of molecules of interest at the molecular level onto the nitrone-AuNP template allowed us to create a novel methodology for the synthesis of AuNP-based radiolabeled probes.

Highly selective microglial uptake of ceria-zirconia nanoparticles for enhanced analgesic treatment of neuropathic pain

Neuropathic pain is a chronic and pathological pain caused by injury or dysfunction in the nervous system. Pro-inflammatory microglial activation with aberrant reactive oxygen species (ROS) generation in the spinal cord plays a critical role in the development of neuropathic pain. However, the efficacy of current therapeutic methods for neuropathic pain is limited because only neurons or neural circuits involved in pain transmission are targeted. Here, an effective strategy to treat pain hypersensitivity using microglia-targeting ceria-zirconia nanoparticles (CZ NPs) is reported. The CZ NPs are coated with microglia-specific antibodies to promote their delivery to microglia, and thus to improve their therapeutic efficacy. The targeted delivery facilitates the elimination of both pro-inflammatory cytokines and ROS in microglia, enabling the rapid and effective inhibition of microglial activation. As a result, greatly ameliorated mechanical allodynia is achieved in a spinal nerve transection (SNT)-induced neuropathic pain mouse model, proving the potent analgesic effect of the microglia-targeting CZ NPs. Given the generality of the approach used in this study, the microglia-targeting CZ NPs are expected to be useful for the treatment of not only neuropathic pain but also other neurological diseases associated with the vicious activation of microglia.

An automatable platform for genotoxicity testing of nanomaterials based on the fluorometric γ-H2AX assay reveals no genotoxicity of properly surface-shielded cadmium-based quantum dots

The large number of nanomaterial-based applications emerging in the materials and life sciences and the foreseeable increasing use of these materials require methods that evaluate and characterize the toxic potential of these nanomaterials to keep safety risks to people and environment as low as possible. As nanomaterial toxicity is influenced by a variety of parameters like size, shape, chemical composition, and surface chemistry, high throughput screening (HTS) platforms are recommended for assessing cytotoxicity. Such platforms are not yet available for genotoxicity testing. Here, we present first results obtained for application-relevant nanomaterials using an automatable genotoxicity platform that relies on the quantification of the phosphorylated histone H2AX (γ-H2AX) for detecting DNA double strand breaks (DSBs) and the automated microscope system AKLIDES® for measuring integral fluorescence intensities at different excitation wavelengths. This platform is used to test the genotoxic potential of 30 nm-sized citrate-stabilized gold nanoparticles (Au-NPs) as well as micellar encapsulated iron oxide nanoparticles (FeOx-NPs) and different cadmium (Cd)-based semiconductor quantum dots (QDs), thereby also searching for positive and negative controls as reference materials. In addition, the influence of the QD shell composition on the genotoxic potential of these Cd-based QDs was studied, using CdSe cores as well as CdSe/CdS core/shell and CdSe/CdS/ZnS core/shell/shell QDs. Our results clearly revealed the genotoxicity of the Au-NPs and its absence in the FeOx-NPs. The genotoxicity of the Cd-QDs correlates with the shielding of their Cd-containing core, with the core/shell/shell architecture preventing genotoxicity risks. The fact that none of these nanomaterials showed cytotoxicity at the chosen particle concentrations in a conventional cell viability assay underlines the importance of genotoxicity studies to assess the hazardous potential of nanomaterials.

Structural and Physicochemical Properties and Biocompatibility of Linear and Looped Polymer-Capped Gold Nanoparticles

Various polymer brushes with linear and looped conformations have gained considerable attention in the application of biomaterials and nanotechnology. In this work, the linear and looped polymer brush shells based on PEG-SH and SH-PEG-SH chains binding to gold nanoparticles (AuNPs) are synthesized. The structure and topology of the PEGylated AuNPs are systematically investigated. The basic physicochemical parameters of these PEGylated AuNPs such as hydrodynamic size, grafting density, hydrophilicity, colloidal stability, and biocompatibility are determined intensively. The looped polymer topology can remarkably alter physicochemical properties of polymer brushes compared with the linear counterparts. When the molecular weight of PEG is low (1 and 5 kDa), the looped polymer shells have smaller hydrodynamic size and lower grafting density than their linear analogues; when the molecular weight of PEG is high (10 kDa), the looped shells are much thicker and denser than the linear ones. Interestingly, the looped PEGs on AuNPs are more stable in a high-salt environment and have better hydrophilicity, which endow excellent biocompatibility, including protein resistance and cell viability. These results provide a simple approach to design polymer brushes with different topologies on AuNPs, improve the biocompatibility of hybrid AuNPs, and acquire the potential application in the biomedical field.

Surface-Enhanced Raman Scattering-Fluorescence Dual-Mode Nanosensors for Quantitative Detection of Cytochrome c in Living Cells

During apoptosis process, the release of cytochrome c (Cyt c) is considered to be a key factor in the intrinsic pathway and is often defined as no regression point. Quantitative detection of intracellular Cyt c remains a challenge. Herein, we have developed surface-enhanced Raman scattering (SERS)-fluorescence dual-mode nanosensors for the quantitative assay of Cyt c in living cells. Dual signal detection was achieved by constructing gold nanotriangles (AuNTs) nanosensors capable of specifically recognizing Cyt c. The nanosensors were prepared by modifying the aptamer of Cyt c on AuNTs and connecting the complementary strands modified with Cy5. The AuNTs provided both enhanced SERS signals and fluorescence quenching effects. Once cells were induced by external stimulus (such as toxins) to release Cyt c, Cyt c would specifically bind to its aptamer, and the complementary strands modified with Cy5 would detach which would result in weakened SERS signal and recovery of fluorescence signal. The experimental results showed that the nanosensors not only had excellent selectivity and sensitivity but also realized real-time monitoring of Cyt c translocation event from mitochondria to cytoplasm. The SERS and fluorescence intensity showed good linear relationship with Cyt c concentration ranging from 0.044 to 9.95 μM and achieved a minimum limit of detection (LOD) of 0.02 μM in living cells. The accuracy of intracellular Cyt c quantitative results was more than 90% compared with the ELISA results.

Probing the biological obstacles of nanomedicine with gold nanoparticles

Despite massive growth in nanomedicine research to date, the field still lacks fundamental understanding of how certain physical and chemical features of a nanoparticle affect its ability to overcome biological obstacles in vivo and reach its intended target. To gain fundamental understanding of how physical and chemical parameters affect the biological outcomes of administered nanoparticles, model systems that can systematically manipulate a single parameter with minimal influence on others are needed. Gold nanoparticles are particularly good model systems in this case as one can synthetically control the physical dimensions and surface chemistry of the particles independently and with great precision. Additionally, the chemical and physical properties of gold allow particles to be detected and quantified in tissues and cells with high sensitivity. Through systematic biological studies using gold nanoparticles, insights toward rationally designed nanomedicine for in vivo imaging and therapy can be obtained. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Controlled Nano-Bio Interface of Functional Nanoprobes for in Vivo Monitoring Enzyme Activity in Tumors

Engineering inorganic nanoparticles with a biocompatible shell to improve their physicochemical properties is a vital step in taking advantage of their superior magnetic, optical, and photothermal properties as multifunctional molecular imaging probes for disease diagnosis and treatment. The grafting/peeling-off strategy we developed for nanoparticle surface coating can fully control the targeting capability of functional nanoprobes by changing their colloidal behaviors such as diffusion and sedimentation rates at the desired sites. We demonstrated that a cleavable coating layer initially immobilized on the surface of magnetic resonance imaging probes not only makes the nanoparticles water-soluble but also can be selectively removed by specific enzymes, thereby resulting in a significant decrease of their water solubility in an enzyme-rich environment. Upon removal of surface coating, the changes in hydrodynamic size and surface charges of nanoprobes as a result of interacting with biomolecules and proteins lead to dramatic changes in their in vivo colloidal behaviors ( i. e., slow diffusion rates, tendency to aggregate and precipitate), which were quantitatively evaluated by examining changes in their hydrodynamic sizes, magnetic properties, and count rates during the size measurement. Because the retention time of nanoprobes within the tumor tissues depends on the uptake and excretion rate of the nanoprobes through the tumors, selective activation of nanoprobes by a specific enzyme resulted in much higher tumor accumulation and longer retention time within the tumors than that of the inactive nanoprobes, which passively passed through the tumors. The imaging contrast effect of tumors using activatable nanoprobes was significantly improved over using inactive probes. Therefore, the grafting/peeling-off strategy, as a general design approach for surface modification of nanoprobes, offers a promising and highly efficient way to render the nanoparticles suitable for targeted imaging of tumors.

Photo-reduction of Ag nanoparticles by using cellulose-based micelles as soft templates: Catalytic and antimicrobial activities

Amphiphilic cellulose derivatives were synthesized from allyl cellulose (AC) and cystein (Cys)/n-dodecyl mercaptan (NDM) via the thiol-ene click reactions. The derivatives were self-assembled into micelles in distilled water, and the micelles sizes increased with an increase of the DS_NDM. The amphiphilic cellulose micelles were served as the soft templates for the controllable synthesis of Ag nanoparticles (NPs) through the photo-reduction. Ag NPs were embedded and stabilized by the amphiphilic cellulose micelles, and their sizes increased from 3.1 to 14.4 nm with an increase of the original template sizes. The catalytic properties of the Ag-loaded micelles were evaluated by the reduction of p-nitropheonl to p-aminophenol. The results demonstrated that the Ag-loaded micelles exhibited excellent catalytic activity. The reduction followed the first-order rate law, and the reaction constant decreased with increasing size of Ag NPs. Moreover, the Ag-loaded micelles displayed good antimicrobial activities to both S. aureus and E. coli. Therefore, the Ag-loaded cellulose-based micelles have potential applications in various fields.

Graphene Quantum Dots-Mediated Theranostic Penetrative Delivery of Drug and Photolytics in Deep Tumors by Targeted Biomimetic Nanosponges

Dual-targeted delivery of drugs and energy by nanohybrids can potentially alleviate side effects and improve the unique features required for precision medicine. To realize this aim, however, the hybrids which are often rapidly removed from circulation and the piled up tumors periphery near the blood vessels must address the difficulties in low blood half-lives and tumor penetration. In this study, a sponge-inspired carbon composites-supported red blood cell (RBC) membrane that doubles as a stealth agent and photolytic carrier that transports tumor-penetrative agents (graphene quantum dots and docetaxel (GQD-D)) and heat with irradiation was developed. The RBC-membrane enveloped nanosponge (RBC@NS) integrated to a targeted protein that accumulates in tumor spheroids via high lateral bilayer fluidity exhibits an 8-fold increase in accumulation compared to the NS. Penetrative delivery of GQDs to tumor sites is actuated by near-infrared irradiation through a one-atom-thick structure, facilitating penetration and drug delivery deep into the tumor tissue. The synergy of chemotherapy and photolytic effects was delivered by the theranostic GQDs deep into tumors, which effectively damaged and inhibited the tumor in 21 days when treated with a single irradiation. This targeted RBC@GQD-D/NS with the capabilities of enhanced tumor targeting, NIR-induced drug penetration into tumors, and thermal ablation for photolytic therapy promotes tumor suppression and exhibits potential for other biomedical applications.

The impact of nanoparticle-driven lysosomal alkalinization on cellular functionality

BACKGROUND

The biomedical use of nanosized materials is rapidly gaining interest, which drives the quest to elucidate the behavior of nanoparticles (NPs) in a biological environment. Apart from causing direct cell death, NPs can affect cellular wellbeing through a wide range of more subtle processes that are often overlooked. Here, we aimed to study the effect of two biomedically interesting NP types on cellular wellbeing.

RESULTS

In the present work, gold and SiO₂ NPs of similar size and surface charge are used and their interactions with cultured cells is studied. Initial screening shows that at subcytotoxic conditions gold NPs induces cytoskeletal aberrations while SiO₂ NPs do not. However, these transformations are only transient. In-depth investigation reveals that Au NPs reduce lysosomal activity by alkalinization of the lysosomal lumen. This leads to an accumulation of autophagosomes, resulting in a reduced cellular degradative capacity and less efficient clearance of damaged mitochondria. The autophagosome accumulation induces Rac and Cdc42 activity, and at a later stage activates RhoA. These transient cellular changes also affect cell functionality, where Au NP-labelled cells display significantly impeded cell migration and invasion.

CONCLUSIONS

These data highlight the importance of in-depth understanding of bio-nano interactions to elucidate how one biological parameter (impact on cellular degradation) can induce a cascade of different effects that may have significant implications on the further use of labeled cells.

How Entanglement of Different Physicochemical Properties Complicates the Prediction of in Vitro and in Vivo Interactions of Gold Nanoparticles

The physicochemical properties of a set of 21 different gold nanoparticles (spherical and rod-shaped nanoparticles (NPs) of different diameters with three different surface coatings) were studied. Protein corona formation, in vitro uptake, effect on cell viability and proliferation, and in vivo biodistribution of these NPs were determined. The relation of the results of the different NPs was analyzed by hierarchical cluster analysis, which will tell which NPs have the most similar physicochemical properties and biological effects, without having to specify individual physicochemical parameters. The results show that the physicochemical properties of gold nanoparticles (Au NPs) are mainly accounted for by their hydrodynamic diameter and their zeta-potential. The formation of the protein corona is determined by the pH-dependence of their zeta-potential. While several reports found that in vitro uptake and in vivo biodistribution of NPs are correlated to individual physicochemical parameters, e. g., size, shape, or surface chemistry, such direct dependence in the investigated multidimensional set of NPs was not found in our study. This most likely is due to entanglement of the different parameters, which complicates the prediction of the biological effect of NPs in case multiple physicochemical properties are simultaneously varied. The in vitro uptake and in vivo biodistribution of NPs seem to be not directly driven by the protein corona, but the physicochemical properties determine as well the corona as they influence in vitro/ in vivo behaviors, and thus the effect of the protein corona would be rather indirect.

Mussel-inspired construction of thermo-responsive double-hydrophilic diblock copolymers-decorated reduced graphene oxide as effective catalyst supports for highly dispersed superfine Pd nanoparticles

Well-dispersed ultrafine palladium nanoparticles supported by reduced graphene oxide functionalized with catechol-terminated thermo-responsive block copolymer (PdNPs@BPrGO) were successfully constructed for highly efficient heterogeneous catalytic reduction. We first synthesized a novel temperature-responsive episulfide-containing double-hydrophilic diblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-2,3-epithiopropyl methacrylate)-block-poly(N-isopropylacrylamide) (P(PEGMA-co-ETMA)-b-PNIPAM), through a reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a chain-transfer agent with a catechol unit as the end group. The obtained block copolymers can be facilely anchored to the surface of GO via mussel-inspired chemistry. The PdNPs were loaded on GO decorated with block copolymer brushes (BPrGO) as a support via the in situ reduction of palladium precursors with the episulfide ligands of the block copolymer as a stabilizer. The resulting PdNPs@BPrGO nanohybrid catalyst had good water dispersibility and stability. Furthermore, a low dosage of PdNPs@BPrGO catalyst exhibited excellent catalytic performance in the reduction of methylene blue and nitrophenols. The performance was attributed to the ability of PdNPs@BPrGO to facilitate the diffusion of reactants compared to PdNPs@GO without polymer modification. PdNPs@BPrGO also possessed an interesting temperature-responsive catalytic property due to the reversible "coil-to-globule" phase transition behaviour of PNIPAM blocks onto the surface of catalyst. The PdNPs@BPrGO catalyst was successfully recovered and reused five times without any detectible loss in catalytic activity, demonstrating its great potential in a wide range of industrial catalytic applications.

Factors relating to the biodistribution & clearance of nanoparticles & their effects on in vivo application

Nanoparticles have promising biomedical applications for drug delivery, tumor imaging and tumor treatment. Pharmacokinetics are important for the in vivo application of nanoparticles. Biodistribution and clearance are largely defined as the key points of pharmacokinetics to maximize therapeutic efficacy and to minimize side effects. Different engineered nanoparticles have different biodistribution and clearance processes. The interactions of organs with nanoparticles, which are determined by the characteristics of the organs and the biochemical/physical properties of the nanoparticles, are a major factor influencing biodistribution and clearance. In this review, the clearance functions of organs and the properties related to pharmacokinetics, including nanoparticle size, shape, biodegradation and surface modifications are discussed.

Study of Fluorinated Quantum Dots-Protein Interactions at the Oil/Water Interface by Interfacial Surface Tension Changes

Understanding the interaction of nanoparticles with proteins and how this interaction modifies the nanoparticles’ surface is crucial before their use for biomedical applications. Since fluorinated materials are emerging as potential imaging probes and delivery vehicles, their interaction with proteins of biological interest must be studied in order to be able to predict their performance in real scenarios. It is known that fluorinated planar surfaces may repel the unspecific adsorption of proteins but little is known regarding the same process on fluorinated nanoparticles due to the scarce examples in the literature. In this context, the aim of this work is to propose a simple and fast methodology to study fluorinated nanoparticle-protein interactions based on interfacial surface tension (IFT) measurements. This technique is particularly interesting for fluorinated nanoparticles due to their increased hydrophobicity. Our study is based on the determination of IFT variations due to the interaction of quantum dots of ca. 5 nm inorganic core/shell diameter coated with fluorinated ligands (QD_F) with several proteins at the oil/water interface. Based on the results, we conclude that the presence of QD_F do not disrupt protein spontaneous film formation at the oil/water interface. Even if at very low concentrations of proteins the film formation in the presence of QD_F shows a slower rate, the final interfacial tension reached is similar to that obtained in the absence of QD_F. The differential behaviour of the studied proteins (bovine serum albumin, fibrinogen and apotransferrin) has been discussed on the basis of the adsorption affinity of each protein towards DCM/water interface and their different sizes. Additionally, it has been clearly demonstrated that the proposed methodology can serve as a complementary technique to other reported direct and indirect methods for the evaluation of nanoparticle-protein interactions at low protein concentrations.

Photoluminescence quenching of dye molecules near a resonant silicon nanoparticle

Luminescent molecules attached to resonant colloidal particles are an important tool to study light-matter interaction. A traditional approach to enhance the photoluminescence intensity of the luminescent molecules in such conjugates is to incorporate spacer-coated plasmonic nanoantennas, where the spacer prevents intense non-radiative decay of the luminescent molecules. Here, we explore the capabilities of an alternative platform for photoluminescence enhancement, which is based on low-loss Mie-resonant colloidal silicon particles. We demonstrate that resonant silicon particles of spherical shape are more efficient for photoluminescence enhancement than their plasmonic counterparts in spacer-free configuration. Our theoretical calculations show that significant enhancement originates from larger quantum yields supported by silicon particles and their resonant features. Our results prove the potential of high-index dielectric particles for spacer-free enhancement of photoluminescence, which potentially could be a future platform for bioimaging and nanolasers.