Quaternized Graphene for High-Performance Moisture Swing Direct Air Capture of CO2

Nowadays, moisture-swing adsorption technology still relies on quaternary ammonium resins with limited CO2 capacity under ambient air conditions. In this work, a groundbreaking moisture-driven sorbent is developed starting from commercial graphene flakes and using glycidyltrimethylammonium chloride for incorporation of CO2-sensitive quaternary ammonium functional groups. Boasting an outstanding CO2 capture performance under ultra-diluted conditions (namely, 3.24 mmol g-1 at CO2 400 ppm and 20% RH), the functionalized sorbent (fGO) features clear competitive advantages over current technologies for direct air capture. Notably, fGO demonstrated unprecedented moisture-swing capacity, ease of regenerability, versatility, selectivity, and longevity. These distinctive features position the fGO as an advanced and promising solution, showcasing its potential to outperform existing methods for moisture-swing direct air capture of CO2.

One-pot synthesis of N-doped petroleum coke-based microporous carbon for high-performance CO2 adsorption and supercapacitors

Waste resource utilization of petroleum coke is crucial for achieving global carbon emission reduction. Herein, a series of N-doped microporous carbons were fabricated from petroleum coke using a one-pot synthesis method. The as-prepared samples had a large specific surface area (up to 2512 m2/g), a moderate-high N content (up to 4.82 at.%), and high population (55%) of ultra-micropores (<0.7 nm). Regulating the N content and ultra-microporosity led to efficient CO2 adsorption and separation. At ambient pressure, the optimal N-doped petroleum coke-based microporous carbon exhibited the highest CO2 uptake of 4.25 mmol/g at 25°C and 6.57 mmol/g at 0°C. These values are comparable or even better than those of numerous previously reported adsorbents prepared by multistep synthesis, primarily due to the existence of ultra-micropores. The sample exhibited excellent CO2/N2 selectivity at 25°C owing to the abundant basic pyridinic and pyrrolic N species; and showed superior CO2 adsorption-desorption cycling performance, which was maintained at 97% after 10 cycles at 25°C. Moreover, petroleum coke-based microporous carbon, with a considerably high specific surface area and hierarchical pore structure, exhibited excellent electrochemical performance over the N-doped sample, maintaining a favorable specific capacitance of 233.25 F/g at 0.5 A/g in 6 mol/L KOH aqueous electrolyte. This study provides insight into the influence of N-doping on the porous properties of petroleum coke-based carbon. Furthermore, the as-prepared carbons were found to be promising adsorbents for CO2 adsorption, CO2/N2 separation and electrochemical application.

Photoresponsive Covalent Organic Frameworks: Visible-Light Controlled Conversion of Porous Structures and Its Impacts

Covalent organic frameworks are a novel class of crystalline porous polymers that enable molecular design of extended polygonal skeletons to attain well-defined porous structures. However, construction of a framework that allows remote control of pores remains a challenge. Here we report a strategy that merges covalent, noncovalent, and photo chemistries to design photoresponsive frameworks with reversibly and remotely controllable pores. We developed a topology-guided multicomponent polycondensation system that integrates protruded tetrafluoroazobenzene units as photoresponsive sites on pore walls at predesigned densities, so that a series of crystalline porous frameworks with the same backbone can be constructed to develop a broad spectrum of pores ranging from mesopores to micropores. Distinct from conventional azobenzene-based systems, the tetrafluoroazobenzene frameworks are highly sensitive to visible lights to undergo high-rate isomerization. The photoisomerization exerts profound effects on pore size, shape, number, and environment, as well as molecular uptake and release, rendering the system able to convert and switch pores reversibly and remotely with visible lights. Our results open a way to a novel class of smart porous materials with pore structures and functions that are convertible and manageable with visible lights.

Bridging the Homogeneous and Heterogeneous Catalysis by Supramolecular Metal-Organic Cages with Varied Packing Modes

Integrating the advantages of homogeneous and heterogeneous catalysis has proved to be an optimal strategy for developing catalytic systems with high efficiency, selectivity, and recoverability. Supramolecular metal-organic cages (MOCs), assembled by the coordination of metal ions with organic linkers into discrete molecules, have performed solvent processability due to their tunable packing modes, endowing them with the potential to act as homogeneous or heterogeneous catalysts in different solvent systems. Here, the design and synthesis of a series of stable {Cu3} cluster-based tetrahedral MOCs with varied packing structures are reported. These MOCs, as homogeneous catalysts, not only show high catalytic activity and selectivity regardless of substrate size during the CO2 cycloaddition reaction, but also can be easily recovered from the reaction media through separating products and co-catalysts by one-step work-up. This is because that these MOCs have varied solubilities in different solvents due to the tunable packing of MOCs in the solid state. Moreover, the entire catalytic reaction system is very clean, and the purity of cyclic carbonates is as high as 97% without further purification. This work provides a unique strategy for developing novel supramolecular catalysts that can be used for homogeneous catalysis and recycled in a heterogeneous manner.

Green construction of magnetic azo porous organic polymer for highly efficient enrichment and detection of phenolic endocrine disruptors

Porous organic polymers (POPs) are prominent sorbents for effective extraction of endocrine disrupting chemicals (EDCs). However, green and sustainable construction of functional POPs is still challenging. Herein, we developed a magnetic azo POP (Mazo-POP) for the first time using hydroxy-rich natural kaempferol and low-toxic basic fuchsin as monomers through a diazo coupling reaction. The Mazo-POP exhibited excellent extraction capabilities for EDCs with a phenolic structure. Consequently, it was used as a magnetic sorbent for extracting phenolic EDCs from water and fish samples, followed by ultrahigh-performance liquid chromatography-tandem mass spectrometric detection. The Mazo-POP based analytical method afforded a good linearity of 0.06-100 ng mL-1 and 0.3-500 ng g-1 for water and fish samples respectively, with detection limits (S/N = 3) of 0.02-0.5 ng mL-1 and 0.1-1.5 ng g-1, respectively. The method recovery was from 85.2% to 109% and relative standard deviation was less 5.3%. Moreover, the effective adsorption was mainly contributed by hydrogen bond, π-π interaction, pore filling and hydrophobic interaction. This work not only provides an efficient method for sensitive determination of phenolic EDCs, but also highlights the significance of green preparation of environmentally friendly sorbents for enriching/adsorbing pollutants.

Recyclable N-Heterocyclic Carbene Porous Coordination Polymers with Two Distinct Metal Sites for Transformation of CO2 to Cyclic Carbonates

Single-component catalysts with integrated multiple reactive centers could work in concert to achieve enhanced activity tailored for specific catalytic reactions, but they remain underdeveloped. Herein, we report the construction of heterogeneous bimetallic porous coordination polymers (PCPs) containing both porphyrin and N-heterocyclic carbene (NHC) metal sites via the coordinative assembly of the NHC functionalities. Three heterobimetallic PCPs (TIPP-Zn-Pd, TIPP-Cu-Pd and TIPP-Ni-Pd) have been prepared to verify this facile synthetic strategy for the first time. In order to establish a cooperative action toward the catalytic CO2 cycloaddition with epoxides, an additional tetraalkylammonium bromide functionality has also been incorporated into these polymeric structures through the N-substituent of the NHC moieties. The resulting heterogeneous bimetallic catalyst TIPP-Zn-Pd exhibits the best catalytic performance in CO2 cycloaddition with styrene oxide (SO) under solvent-free conditions at atmospheric pressure and is applicable to a wide range of epoxides. More importantly, TIPP-Zn-Pd works smoothly and is recyclable in the absence of a cocatalyst under 1.0 MPa of CO2 at 60 °C. This indicates that TIPP-Zn-Pd is quite competitive with the reported heterogeneous catalysts, which typically require a high reaction temperature above 100 °C under cocatalyst-free conditions. Thus, this work provides a new approach to design heterogeneous bimetallic PCP catalysts for high-performance CO2 fixation under mild reaction conditions.

Azo-Linked Porous Polycalix[n]arenes for the Efficient Removal of Organic Micropollutants from Water

Developing novel porous adsorbents for efficient wastewater treatment is significant to the environment protection. Herein, three porous polycalix[n]arenes (n = 4, 6, and 8) which had varying cavity sizes of the macrocycle (Azo-CX4P, Azo-CX6P, and Azo-CX8P) were prepared under mild conditions and tested for their potential application in water purification. Azo-CX8P with a larger cavity size of the macrocycle outperformed Azo-CX4P and Azo-CX6P in screening studies involving a range of organic micropollutants. It was proved that Azo-CX8P was especially efficient in the removal of cationic dyes because of its high negative surface charge. In terms of the adsorption of Rhodamine B with Azo-CX8P, the pseudo-second-order rate constant reaches 5.025 g·mg-1·min-1 with the maximum adsorption capacity being 1345 mg·g-1. These values are significantly higher compared with those recorded for most adsorbents. In addition, the easily prepared Azo-CX8P can be reused at least six times without a loss of the adsorption efficiency, demonstrating its potential use in water purification.

Synthesis of azo-linked covalent organic polymers for pipette tip solid-phase extraction of sedative residues from animal tissues samples

Azo-linked covalent organic polymers (ACOPs) were synthesized by a simple azo reaction, with 2,2'-bis(trifluoromethyl)benzidine and 1,3,5-trihydroxybenzene as the monomers. The preparation process was mild, green, and environmental-friendly, avoiding the use of high temperature, metal catalysis, and harmful organic reagent. The obtained ACOPs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, powder X-ray diffraction, and Brunauer-Emmett-Teller. With the prepared ACOPs as adsorbent, a method of pipette tip solid-phase extraction-liquid chromatography-tandem mass spectrometry detection (PTSPE-LC-MS/MS) was proposed for the analysis of target sedatives in animal tissues. Furthermore, the parameters for the extraction of five sedatives, including the amount of adsorbent, pH value, ion strength, elution solvent and volume, were investigated. Under the optimized conditions, the linear dynamic range was found from 0.1 to 10.0 μg kg-1, and the limits of detection were ranged from 0.02 to 0.1 μg kg-1. The method was assessed by the analysis of target sedatives in animal tissues, and the recoveries for the spiked pork muscle and pork liver samples were 84-102% and 83-101%, respectively. The results show that the developed method of PTSPE-LC-MS/MS with ACOPs as adsorbent is efficient for the analysis of trace sedatives in animal tissues.

Hydroxy-Rich Covalent Organic Framework for the Efficient Catalysis of the Cycloaddition of CO2

The cycloaddition of CO2 with epoxides to cyclic carbonates is one of the most promising and green pathways for CO2 utilization, and the development of highly efficient catalysts remains a challenge. In this work, a novel hydroxy-rich covalent organic framework (TFPB-DHBD-COF) was synthesized, and it served as an efficient heterogeneous catalyst for the reaction of CO2 with 1,2-epoxybutane under mild conditions, providing the desired products in 90% conversion. The abundant hydroxy groups in the pore channels of TFPB-DHBD-COF could not only activate epoxides and CO2 via hydrogen bonding but also obviously enhance its stability through intramolecular five-membered ring hydrogen bonding. Thus, this COF also exhibited outstanding stability and tolerance for diverse substrates. Undoubtedly, this work has enriched the application of tailored COFs in the activation and utilization of CO2.

Sustainable synthesis of hydroxyl-functional porous organic framework as novel adsorbent for effective removal of organic micropollutants from water

Organic micropollutants (OMPs) in water resources are a growing threat to aquatic ecosystems and human health. Efficient removal of polar OMPs is very challenging because of their high hydrophility. Synthesizing novel adsorbent capable of high-efficiently removing hydrophilic and hydrophobic micropollutants is highly desirable for water remediation. Here, using natural proanthocyanidin as building units, a novel hydroxyl-functional porous organic framework (denoted as PC-POF) with amphiphilic feature was synthesized through facile azo coupling reaction. Five sulfonamide antibiotics were selected as model OMPs for adsorption study. Adsorption experiments demonstrated a more rapid and efficient sulfonamides capture ability of the PC-POF than that of the most reported adsorbents due to strong hydrogen bonding, π stacking and electrostatic interactions. The PC-POF can be easily recovered and reused at least 5 times without obvious decline in adsorption performance. Moreover, experiments conducted at environmentally relevant concentrations (μg L^-1) further confirmed a notable adsorption performance of the PC-POF even when the sulfonamides solution was rapidly passed through the PC-POF packed column. The PC-POF also showed good adsorption performance for other micropollutants like neonicotinoid insecticides, nitroimidazole antibiotics and triazine herbicides, indicating a promising prospect. This work provides a new strategy to construct amphiphilic adsorbent by using renewable resources for pollutants removal.

Functional Porous Ionic Polymers as Efficient Heterogeneous Catalysts for the Chemical Fixation of CO2 under Mild Conditions

The development of efficient and metal-free heterogeneous catalysts for the chemical fixation of CO₂ into value-added products is still a challenge. Herein, we reported two kinds of polar group (−COOH, −OH)-functionalized porous ionic polymers (PIPs) that were constructed from the corresponding phosphonium salt monomers (v-PBC and v-PBH) using a solvothermal radical polymerization method. The resulting PIPs (POP-PBC and POP-PBH) can be used as efficient bifunctional heterogeneous catalysts in the cycloaddition reaction of CO₂ with epoxides under relatively low temperature, ambient pressure, and metal-free conditions without any additives. It was found that the catalytic activities of the POP-PBC and POP-PBH were comparable with the homogeneous catalysts of Me-PBC and PBH and were higher than that of the POP-PPh₃-COOH that was synthesized through a post-modification method, indicating the importance of the high concentration catalytic active sites in the heterogeneous catalysts. Reaction under low CO₂ concentration conditions showed that the activity of the POP-PBC (with a conversion of 53.8% and a selectivity of 99.0%) was higher than that of the POP-PBH (with a conversion of 32.3% and a selectivity of 99.0%), verifying the promoting effect of the polar group (−COOH group) in the porous framework. The POP-PBC can also be recycled at least five times without a significant loss of catalytic activity, indicating the high stability and robustness of the PIPs-based heterogeneous catalysts.

Construction of hydrophilic hypercrosslinked polymer based on natural kaempferol for highly effective extraction of 5-nitroimidazoles in environmental water, honey and fish samples

A series of novel hydroxyl-functional hypercrosslinked polymers (named as HCPs-Kae) were fabricated using natural and environmentally benign kaempferol as monomer via one-step Friedel-Crafts reaction. The prepared HCP-Kae1-24 h exhibited large surface area, good hydrophilicity and excellent adsorption performance to 5-nitroimidazoles (5-NDZs). Thus, by applying HCP-Kae1-24 h as a solid-phase extraction adsorbent, a sensitive method was developed for enrichment of 5-NDZs including metronidazole, ronidazole, secnidazole, dimetridazole and ornidazole prior to high performance liquid chromatography analysis. Under the optimum conditions, good linearities were achieved in the range of 0.10-100.0 ng mL^-1 for water, 1.3-500.0 ng g^-1 for honey, and 1.7-100.0 ng g^-1 for fish meat. The detection limits of the method were 0.03-0.05 ng mL^-1, 0.4-1.0 ng g^-1, 0.5-1.0 ng g^-1 for water, honey and fish meat, respectively. High method recovery was obtained in the range of 84-118% with relative standard deviations lower than 8.9%. The established method was successfully applied to the detection of 5-NDZs in environmental water, honey and fish samples. This work provides a new strategy for constructing hydroxyl-functional HCPs by using natural resource as robust adsorbent for adsorption/extraction applications.

Azo-Linked Porous Organic Polymers for Selective Carbon Dioxide Capture and Metal Ion Removal

The facile and environmentally friendly synthesis of porous organic polymers with designed polar functionalities decorating the interior frameworks as an excellent adsorbent for selective carbon dioxide capture and metal ion removal is a target worth pursuing for environmental applications. In this regard, two azo-linked porous organic polymers denoted man-Azo-P1 and man-Azo-P2 were synthesized in water by the azo-linking of 4,4'-diaminobiphenyl (benzidine) and 4,4'-methylenedianiline, respectively, with 1,3,5-trihydroxybenzene. The resulting polymers showed good BET surface areas of 290 and 78 m² g^-1 for man-Azo-P1 and man-Azo-P2, respectively. Due to the enriched core functionality of the azo (-N=N-) and hydroxyl groups along with the porous frameworks, man-Azo-P1 exhibited a good CO₂ uptake capacity of 32 cm³ g^-1 at 273 K and 1 bar, in addition to the remarkable removal of lead (Pd), chromium (Cr), arsenic (As), nickel (Ni), copper (Cu), and mercury (Hg) ions. This performance of the synthesized man-Azo-P1 and man-Azo-P2 in the dual application of CO₂ capture and heavy metal ion removal highlights the unique properties of azo-linked POPs as excellent and stable sorbent materials for the current challenging environmental applications.

Design and preparation of functional azo linked polymers for the adsorptive removal of bisphenol A from water: Performance and analysis of the mechanism

In order to effectively remove refractory bisphenol A (BPA) from water, a novel nitrogen doped organic porous functional azo linked polymer (ALP-p) was designed and prepared according to the physicochemical characteristics of propane linked to two phenol hydroxyl groups. This ALP-p was synthesized with 98.5% yield, from pararosaniline and phloroglucinol, via the diazo coupling reaction to produce multiple adsorption functional groups of benzene ring, hydroxyl group and azo group. This functional material showed high adsorption capacity of 357.8 mg/g for 50 mg/L BPA, at 20 °C. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir model, respectively. The major adsorption mechanisms were attributed to the high specific surface area (259.8 m²/g) and pore volume (0.56 cm³/g) related surface adsorption and pore diffusion through porous stereoscopic stacking cavity anchorage. The functional group from the three-dimensional skeleton structures of ALP-p for BPA anchoring endowed chemisorption via π-π interaction between benzene rings and hydrogen-bonding (O-H⋯O, C-H⋯N, C-H⋯O and C-H⋯C) with the hydrogen atom of benzene ring, -OH from BPA and -OH, NN from ALP-p, respectively. The coexisting organic pollutants and alkali environment posed a negative effect on adsorption, while salinity had no significant effect on the process. The adsorption capacity and recovery of ALP-p were >93.5% and 81.6% after five cycles of operation.

Low-temperature and gram-scale synthesis of chemically stable covalent organic frameworks in an aqueous medium

A facile and green scalable approach for production of chemically stable covalent organic frameworks (COFs) in aqueous medium at room temperature was reported by exploring an ionic liquid ([Bmim][N(CN)2) as the superior catalyst.

Regulating Steric Hindrance in Redox-Active Porous Organic Frameworks Achieves Enhanced Sodium Storage Performance

The development of novel redox-active polymers for sustainable sodium ion batteries (SIBs) has captured growing attention, but battery performance has been significantly limited by poor reversible specific capacities, where the majority of aromatic C6-benzene linkages are redox inactive. Here, a simple, yet efficient approach to improve sodium (Na) storage on these C6-benzene rings within a porous polymeric framework by rationally regulating their steric hindrance is reported. Decreasing intrinsic hindrance affords a significant improvement in redox reaction kinetics within the porous architecture, thereby facilitating the acceptance of Na ions on these functionalized benzene rings and boosting the SIB performance. As a result, the modulate porous framework exhibits an exceptional battery capacity of 376 mAh g^-1 after 1000 cycles at 1.0 A g^-1 , which is ≈1.5 times larger than that of the pristine framework. Furthermore, the performance can reach as high as 510 mAh g^-1 at 0.1 A g^-1 , comparable to that of the best-performing polymeric electrodes. The simple modulation approach not only enables Na storage modulation on functionalized C6-benzene rings, but also simultaneously provides a means to extend the understanding of the structure-property relationship and facilitate new possibilities for organic SIBs.

One-pot construction of nitrogen-rich polymeric ionic porous networks for effective CO2 capture and fixation

Facile preparation of ionic porous networks (IPNs) with large and permanent porosity is highly desirable for CO₂ capture and transformation but remains a challenge. Here we report a one-pot base-mediated construction of nitrogen-rich IPNs through a combination of nucleophilic substitution and quaternisation chemistry from H-imidazole. This strategy, as proven by the model reactions of 1H-imidazole or 1-methyl-1H-imidazole with cyanuric chloride, allows for fine regulation of porosity and physicochemical properties, leading to nitrogen-rich IPNs featuring abundant ionic units and radicals. The as-prepared networks, termed IPN-CSUs, efficiently capture CO₂ (80.1 cc g^-1 at 273 K/1 bar) with an ideal CO₂/N₂ selectivity of 139.7. They can also effectively catalyse the cycloaddition reaction between CO₂ and epoxides with high yields of up to 99% under mild conditions (0.1 MPa, 298 K), suggesting their possible applications in the fields of both selective molecular separation and conversion. Unlike the previously known strategies generally involving single coupling chemistry, our strategy combining two coupling routes in one pot appears to be unique and potentially applicable to other building blocks.

Green Carbon Science: Efficient Carbon Resource Processing, Utilization, and Recycling Towards Carbon Neutrality

Green carbon science is defined as "Study and optimization of the transformation of carbon containing compounds and the relevant processes involved in the entire carbon cycle from carbon resource processing, carbon energy utilization, and carbon recycling to use carbon resources efficiently and minimize the net CO2 emission." [1] Green carbon science is related closely to carbon neutrality, and the relevant fields have developed quickly in the last decade. In this Minireview, we proposed the concept of carbon energy index, and the recent progresses in petroleum refining, production of liquid fuels, chemicals, and materials using coal, methane, CO2, biomass, and waste plastics are highlighted in combination with green carbon science, and an outlook for these important fields is provided in the final section.

Core-shell magnetic porous organic polymer for magnetic solid-phase extraction of fluoroquinolone antibiotics in honey samples followed by high-performance liquid chromatography with fluorescence detection

By monomer-mediated in-situ growth synthesis strategy, with hydroquinone and 1,3,5-tris(4-aminophenyl)benzene as monomers, a core-shell magnetic porous organic polymer was synthesized through a simple azo reaction. Based on this, a magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method was proposed for the analysis of fluoroquinolones in a honey sample. With ofloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, and difloxacin as target analytes, factors affecting the extraction efficiency had been optimized. The LODs were 1.5-5.4 ng/L (corresponding to 0.23-0.81 μg/kg in honey). The linear range was 0.005-20 μg/L for difloxacin, 0.01-20 μg/L for ofloxacin, ciprofloxacin and lomefloxacin, and 0.02-20 μg/L for enrofloxacin. The enrichment factor was 84.4-91.7-fold with a high extraction efficiency of 84.4-91.7%. The method was assessed by the analysis of target fluoroquinolones in honey samples, and the recoveries for the spiked samples were 79.3-95.8%. The results indicated that the established magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method is efficient for the analysis of trace fluoroquinolones in honey.

Selective Conversion of CO2 into Cyclic Carbonate on Atom Level Catalysts

The conversion of carbon dioxide (CO₂) into organic carbonates under ambient temperatures and pressures with high conversion and selectivity still faces a great challenge. The zerovalent atomic catalysts (ACs), featuring accurate structure and valence states, provide a new and accurate model system for catalysis. Herein we developed a general preadsorption-reduction strategy to synthesize zerovalent cobalt AC on graphdiyne (Co⁰/GDY). The Co⁰/GDY ACs were used for efficient and selective CO₂ fixation. We were surprised to find that Co⁰/GDY ACs reached nearly 100% conversion at 80 °C and 1 atm in CO₂ fixation and with a significantly high turnover frequency (TOF) of 3024.8 h^-1, which is almost several orders larger than that of benchmarked catalysts. Such high conversion and selectivity represent the advantages of emerging catalysts.

Grotthuss Proton-Conductive Covalent Organic Frameworks for Efficient Proton Pseudocapacitors

Herein, we describe the synthesis of two highly crystalline, robust, hydrophilic covalent organic frameworks (COFs) that display intrinsic proton conduction by the Grotthuss mechanism. The enriched redox-active azo groups in the COFs can undergo a proton-coupled electron transfer reaction for energy storage, making the COFs ideal candidates for pseudocapacitance electrode materials. After in situ hybridization with carbon nanotubes, the composite exhibited a high three-electrode specific capacitance of 440 F g^-1 at the current density of 0.5 A g^-1 , among the highest for COF-based supercapacitors, and can retain 90 % capacitance even after 10 000 charge-discharge cycles. This is the first example using Grotthuss proton-conductive organic materials to create pseudocapacitors that exhibited both high power density and energy density. The assembled asymmetric two-electrode supercapacitor showed a maximum energy density of 71 Wh kg^-1 with a maximum power density of 42 kW kg^-1 , surpassing that of all reported COF-based systems.

Ionic-Liquid-Catalyzed Approaches under Metal-Free Conditions

ConspectusMetal-free catalysis is a promising protocol to access chemicals without metal contamination. Ionic liquids (ILs) that are entirely composed of organic cations and inorganic/organic anions have emerged as promising alternatives to molecular solvents and metal catalysts due to their unique properties such as structural tunability, the coexistence of multiple interactions among ions (e.g., electrostatic interaction, hydrogen bonding, van de Waals forces, acid/base interactions, hydrophilic/hydrophobic interactions, etc.), unique affinity for a wide range of chemicals, good chemical and thermal stability, and quite low volatility. ILs have shown potential applications in various chemical processes.In this Account, we systematically described our most recent work on IL-catalyzed approaches under metal-free conditions. The first section presents the IL-catalyzed strategies toward the transformation of CO2 to value-added chemicals, focusing on the CO2-reactive IL-catalyzed CO2 transformation to various heterocycles and the IL-catalyzed reductive transformation of CO2 to chemicals. In these approaches, we designed task-specific ILs that are able to chemically capture and activate CO2 via forming anion-based carbonate/carbamate or cation-based carboxylate/carbamate intermediates, thus further accomplishing its transformation to a series of heterocycles including quinazoline-2,4(1H,3H)-diones, cyclic carbonates, 2-oxazolidinones, oxazolones, and benzimidazolones under metal-free conditions. For the IL-catalyzed approaches to reducing CO2 with hydrosilanes to chemicals, we employed ILs capable of activating the Si-H bond in hydrosilanes and the N-H bond in amine substrates via H-bonding, thus achieving the reductive transformation of CO2 to formamides, benzimidazoles, and benzothiazoles via cooperative catalysis. The second section describes our finding on the IL-catalyzed hydration of the C≡C bond in propargylic alcohols. Azolate anion-based ILs that can chemically capture CO2 via the formation of carbamates could serve as robust nucleophiles to attack the C≡C bond in propargylic alcohols and then efficiently catalyze the hydration of propargylic alcohols to produce α-hydroxy ketones with the assistance of atmospheric CO2 gas under metal-free conditions. The third section unveils the cooperative catalysis strategy of hydrogen bond donors and acceptors of ILs for chemical reactions. In the hydrogen-bonding catalysis protocols, cations of the ILs act as H-bond donors and anions, as acceptors, forming H-bonds with the reactant molecules, respectively, in opposite ways, which can cooperatively catalyze the ring-closing C-O/C-O bond metathesis reactions of aliphatic diethers to O-heterocycles, the dehydrative etherification of alcohols to ethers, and direct oxidative esterification of alcohols to esters. We believe that these IL-catalyzed metal-free processes and strategies display promising practical applications, and their commercialization would bring great benefits to the production of the as-afforded value-added chemicals.

15N Solid-State NMR as Bright Eyes to See the Isomerization of the Azo Bond: Revision of Tris(β-hydroxyl-azo)-benzene to Tris(β-keto-hydrazo)-cyclohexane in Porous Organic Polymers

Porous organic polymers (POPs) have aroused great and wide attention from the materials community, while the identification of their precise structures is still very challenging. The well-defined structures are of great importance in understanding the relationship between the structure and function of the polymer materials, though they are sometimes ignored and do not receive enough attention. In this letter, an efficient ¹⁵N labeling technique and ¹⁵N solid-state NMR (¹⁵N-SSNMR) were combined to obtain strong evidence for the presence of the azo bond and keto-hydrazone structure in the solid state. Thus, the structure of tris(β-hydroxyl-azo)-benzene in previously proposed hydroxylazobenzene polymers was revised to tris(β-keto-hydrazo)-cyclohexane in TKH-POPs for the first time. In contrast, similar tautomerization did not occur in the azo coupling polymerization of 1,3,5-triaminobenzene and diazonium salts, i.e., tris(β-amino-azo)-benzene remained in Azo-POPs. This work will open up a window to develop innovative porous organic polymers more efficiently with the aid of ¹⁵N-SSNMR.

Metalated Porous Phenanthroline-Based Polymers as Efficient Heterogeneous Catalysts for Regioselective C-H Activation of Heteroarenes

Direct C-H bond activation of heterocycles as a step-economical and environmentally friendly approach to build the heterobiaryls motifs is highly attractive, but it still has a challenge to design and prepare a cheap and regioselective heterogeneous catalyst. To tackle this challenge, we have introduced Ni species into a porous phenanthroline-based organic polymer donated as POP-Phen@Ni. This heterogeneous catalyst shows excellent catalytic performances in regioselective C-H activation of heterocycles, even better than those of the corresponding homogenous catalyst. H/D exchange experiments show that the lithium bis(trimethylsilyl)amide (LiHMDS), a base added in the reaction, play a very important role during the reaction processes. We believe that this heterogeneous catalyst would open a new door for design of heterogeneous catalysts to efficiently catalyze the regioselective C-H activation of heterocycles.

Molecular engineering in a family of pillared-layered metal-organic frameworks for tuning gas adsorption behavior

In this work, inspired by a water-assisted three-dimensional supramolecular structure 1, we use a mixed-ligand strategy to form a 3D pillared-layered matrix by the introduction of linear ligands to compete against the water molecules. The resulting analogue microporous MOFs of 2-H, 2-F and 2-N, decorated with different functional groups, similarly show the CO2 uptake. Thanks to the negligible N2 adsorption capacity, enhanced selective adsorption towards CO2 is achieved in compound 2-N. That is, we present here an alternative plan for the high CO2 selective adsorption performance. In addition, the structure stability and moderate affinity for CO2 of these microporous MOFs endow them with excellent reusability.

The design and synthesis of heterogeneous catalysts for environmental applications

With the rapid advancements in synthetic strategies, the field of heterogeneous catalysis has expanded enormously over the last few decades, and today it is one of the foremost areas in energy and environmental research. Various templating and non-templating routes for designing porous nanomaterial-based catalysts starting from precursor building blocks are highlighted here. CO₂ and biomass are two major abundant resources that can be utilized as feedstocks for various heterogeneous catalytic processes. These are described in brief, together with environmental clean-up applications and future perspectives for addressing environmental issues.

High-efficiency Pd nanoparticles loaded porous organic polymers membrane catalytic reactors

An innovative tactic to prepare porous organic polymer membranes was developed via interfacial azo-coupling polymerization. The membranes possess plentiful anchoring sites for loading Pd nanoparticles, and served as a membrane reactor, which exhibits high-performance catalytic reduction with a flux of 27.3 t m^-2 day^-1 and good long-term stability due to almost zero Pd leaching.

Functional Porous Organic Polymers with Conjugated Triaryl Triazine as the Core for Superfast Adsorption Removal of Organic Dyes

Developing efficient adsorbents for the removal of water pollutants is of great significance for environmental protection. In this study, conjugated triaryl triazines (CTT), containing intramolecular hydrogen-bonding patterns, were recognized to be intriguing building blocks for the construction of porous organic polymer (POP) adsorbents. These planar monomers with multiple phenolic hydroxyl groups facilitated the formation of aza-linked polymers with hierarchical porous structures, sheet-like morphology, good surface wettability, and high degree of functionality. Such structural characteristics of the CTT-POP adsorbents provided superfast adsorption of various cationic dyes from water. For the adsorption of methylene blue dye, the pseudo-second-order rate constant of CTT-POP-1 is 12.9 g mg^-1 min^-1, superior to those reported in the existing literature. In addition, CTT-POP-1 can be regenerated at least seven times with no loss in performance, indicating its potential application in water treatment.

Zinc oxide rod/peanut shell-derived porous carbon composites for cooperative CO2 chemical fixation

A ZnO/biowaste-derived porous carbon composite exhibits admirable activity and selectivity in the cycloaddition of epoxides with CO₂ under mild conditions.

Protic ionic liquids tailored by different cationic structures for efficient chemical fixation of diluted and waste CO2 into cyclic carbonates

Environment-friendly approaches to directly convert atmospheric or flue gas CO₂ to high-value chemicals is of great significance yet challenging.

Carbon Dioxide Conversion Upgraded by Host-guest Cooperation between Nitrogen-Rich Covalent Organic Framework and Imidazolium-Based Ionic Polymer

The chemical conversion of CO₂ into value-added chemicals is one promising approach for CO₂ utilization. It is crucial to explore highly efficient catalysts containing task-specific components for CO₂ fixation. Here, a host-guest catalytic system was developed by integrating nitrogen-rich covalent organic framework (TT-COF) and imidazolium-based ionic polymer (ImIP), which serve as hydrogen-bonding donor and nucleophilic agent, respectively, for cooperatively facilitating the activation of the epoxides and subsequent CO₂ cycloaddition. The catalytic activity of the host-guest system was remarkably superior to those of ImIP, TT-COF, and their physical mixture. Furthermore, selective adsorption for CO₂ over N₂ rendered this catalytic system effective for the cycloaddition reaction of the simulated flue gas. The protocols for the unification of two catalytically active components provide new opportunities for the development of composite systems in multiple applications.

Building N-Heterocyclic Carbene into Triazine-Linked Polymer for Multiple CO2 Utilization

The development of new CO₂ detection technologies and CO₂ "capture-conversion" materials is of great significance due to the growing environmental crisis. Here, multifunctional triazine-linked polymers with built-in N-heterocyclic carbene (NHC) sites (designated as NHC-triazine@polymer) are presented for simultaneous CO₂ detection, capture, activation, and catalytic conversion. NHC-triazine@polymer were readily obtained through polymerization of cyanophenyl-substituted NHC. The obtained film-like polymers exhibited interesting CO₂ -triggered fluorescence "turn-on" response and CO₂ -sensitive reversible color change. Both NHC and triazine sites could act as efficient binding sites for CO₂ , and the CO₂ uptake of NHC and triazine reached 1.52 and 1.36 mmol g^-1 , respectively. Notably, after being captured by NHC, CO₂ was activated into a zwitterionic adduct NHC-CO₂ that could be easily transformed into cyclic carbonate in the presence of epoxides. Moreover, NHC-triazine@polymer were stable and active catalysts for the conversion of low-concentration CO₂ in a gas mixture (7 vol %) into cyclic carbonates as well as for hydrosilylation of CO₂ to formamides.

Enhanced carbon dioxide conversion at ambient conditions via a pore enrichment effect

Chemical fixation of carbon dioxide (CO₂) may be a pathway to retard the current trend of rapid global warming. However, the current economic cost of chemical fixation remains high because the chemical fixation of CO₂ usually requires high temperature or high pressure. The rational design of an efficient catalyst that works at ambient conditions might substantially reduce the economic cost of fixation. Here, we report the rational design of covalent organic frameworks (COFs) as efficient CO₂ fixation catalysts under ambient conditions based on the finding of “pore enrichment”, which is concluded by a detailed investigation of the 10994 COFs. The best predicted COF, Zn-Salen-COF-SDU113, is synthesized, and its efficient catalytic performance for CO₂ cycloaddition to terminal epoxide is confirmed with a yield of 98.2% and turnover number (TON) of 3068.9 under ambient conditions, which is comparable to the reported leading catalysts. Moreover, this COF achieves the cycloaddition of CO₂ to 2,3-epoxybutane under ambient conditions among all porous materials. This work provides a strategy for designing porous catalysts in the economic fixation of carbon dioxide.

Currently the cost of CO₂ chemical fixation remains high because of harsh reaction conditions. Here, the authors report a covalent organic framework screened from 10994 candidates as the efficient CO₂ fixation catalyst under ambient conditions based on the finding of a “pore enrichment effect”.