A Square-Planar Complex of Platinum(0)

Sulfonium Cation in the Service of π-Acid Catalysis

While still rare, cationic ligands offer much promise as tunable electron-withdrawing ligands for π-acid catalysis. Recently, we introduced pincer-type sulfonium cations into the list of available strongly π-acidic ancillary ligands. However, the M-S bond in sulfonium complexes of these ligands was found highly labile, precluding their catalytic applications. Herein we demonstrate that this obstacle can be overcome by increasing the rigidity of the sulfonium pincer scaffold. X-ray analyses confirm that despite bearing a formal positive charge, the sulfur atom of this newly designed sulfonium ligand maintains its coordination to the Pt(II)-center, while DFT calculations indicate that by doing so it strongly enhances the electrophilic character of the metal. Kinetic studies carried out on three model cycloisomerization reactions prove that such a tris-cationic sulfonium-Pt(II) complex is highly reactive, compared to its thioether-based analogue. This proof-of-concept study presents the first example of employing sulfonium-based ligands in homogeneous catalysis.

Hydroelementation and Phosphinidene Transfer: Reactivity of Phosphagermenes and Phosphastannenes Towards Small Molecule Substrates

We describe the facile synthesis of [(Me3 Si)2 CH]2 E=PMes* (E=Ge, Sn) from the reaction of the tetrylenes with the phospha-Wittig reagent, Me3 P-PMes*. Their reactivity towards a range of substrates with protic and hydridic E-H bonds (E=N, O, Si) is described. In addition to hydroelementation reactions of the E=P bonds, we show that these compounds, particularly [(Me3 Si)2 CH]2 Sn=PMes*, also act as base-stabilized phosphinidenes, allowing phosphinidene transfer to other nucleophiles.

Synthesis, Coordination Chemistry, and Mechanistic Studies of P,N-Type Phosphaalkene-Based Rh(I) Complexes

The synthesis of P,N-phosphaalkene ligands, py-CH═PMes* (1, py = 2-pyridyl, Mes* = 2,4,6-tBu-C₆H₂) and the novel quin-CH═PMes* (2, quin = 2-quinolinyl) is described. The reaction with [Rh(μ-Cl)cod]₂ produces Rh(I) bis(phosphaalkene) chlorido complexes 3 and 4 with distorted trigonal bipyramidal coordination environments. Complexes 3 and 4 show a pronounced metal-to-ligand charge transfer (MLCT) from Rh into the ligand P═C π* orbitals. Upon heating, quinoline-based complex 4 undergoes twofold C-H bond activation at the o-tBu groups of the Mes* substituents to yield the cationic bis(phosphaindane) Rh(I) complex 5, which could not be observed for the pyridine-based analogue 3. Using sub- or superstoichiometric amounts of AgOTf the C-H bond activation at an o-tBu group of one or at both Mes* was detected, respectively. Density functional theory (DFT) studies suggest an oxidative proton shift pathway as an alternative to a previously reported high-barrier oxidative addition at Rh(I). The Rh(I) mono- and bis(phosphaindane) triflate complexes 6 and 7, respectively, undergo deprotonation at the benzylic CH₂ group of the phosphaindane unit in the presence of KOtBu to furnish neutral, distorted square-planar Rh(I) complexes 8 and 9, respectively, with one of the P,N ligands being dearomatized. All complexes were fully characterized, including multinuclear NMR, vibrational, and ultraviolet-visible (UV-vis) spectroscopy, as well as single-crystal X-ray and elemental analysis.

Structural Snapshots in Reversible Phosphinidene Transfer: Synthetic, Structural, and Reaction Chemistry of a Sn═P Double Bond

The reaction of amido-substituted stannylenes with phospha-Wittig reagents (Me₃PPR) results in release of hexamethyldisilazane and tethering of the resulting -CH₂PMe₂PR fragment to the tin center to give P-donor stabilized stannylenes featuring four-membered Sn,C,P,P heterocycles. Through systematic increases in steric loading, the structures of these systems in the solid state can be tuned, leading to successive P-P bond lengthening and Sn-P contraction and, in the most encumbered case, to complete P-to-Sn transfer of the phosphinidene fragment. The resulting stannaphosphene features a polar Sn═P double bond as determined by structural and computational studies. The reversibility of phosphinidene transfer can be established by solution phase measurements and reactivity studies.

Heterotridentate organodiphosphines in Pt(η3–P1X1P2)(Y) derivatives-structural aspects

This review covers over 30 examples of monomeric Pt(II) complexes of the types: Pt(η3–P1O1P2)(Y) (Y = PL, CL, OL), Pt(η3–P1N1P2)(Y) (Y = H, NL, CL, Cl, PL) and Pt(η3–P1P2N1)(Y) (Y = Cl). The heterotridentate donor ligands create 11 types of a couple chelate rings with common central atom O1 (η3–P1O1P2), N1 (η3–P1N1P2) and P2 (η3–P1P2N1). The most frequent is P1C2N1C2P2. Some cooperative effects between chelate rings and Y donor ligands were found and discussed. A degree of distortions of square-planar geometry about Pt(II) were also calculated.

Reactivity of phospha-Wittig reagents towards NHCs and NHOs

Phospha-Wittig reagents, RPPMe3 (R = Mes* 2,4,6-tBu3-C6H2; MesTer 2,6-(2,4,6-Me3C6H2)-C6H3; DipTer 2,6-(2,6-iPr2C6H3)-C6H3), can be considered as phosphine-stabilized phosphinidenes. In this study we show that PMe3 can be displaced by NHCs or NHOs. Interestingly, phosphinidene-like reactivity results in a subsequent C(sp2)-H activation of the exocyclic CH2 group in NHOs. This concept was further extended to allyl-apended NHOs, which resulted in phosphine-substituted allyl species.

Cu(i) complex bearing a PNP-pincer-type phosphaalkene ligand with a bulky fused-ring Eind group: properties and applications to FLP-type bond activation and catalytic CO2 reduction

Herein, we report the synthesis of [Cu(Eind2-BPEP)][PF6] (2) (Eind2-BPEP = 2,6-bis(2-Eind-2-phosphaethenyl)pyridine, Eind = 1,1,3,3,5,5,7,7-octaethyl-1,2,3,5,6,7-hexahydro-s-indacen-4-yl), a three-coordinated Cu(i) complex bearing a PNP-pincer-type phosphaalkene ligand with bulky fused-ring Eind groups. The Gutmann-Beckett test revealed that complex 2 is highly Lewis acidic and comparable in strength to B(C6F5)3, which is a relatively strong Lewis acid. In addition, 2 is more Lewis acidic than [Cu(Mes*2-BPEP)][PF6] (3), the analogous complex with less-bulky Mes* instead of Eind groups. DFT calculations using model compounds revealed that the higher Lewis acidity of 2 compared to 3 is not due to the electronic effects of the ligand, but due to a reduction in the LUMO energy caused by the steric effect of the bulky Eind groups. When combined with a tertiary amine, the highly Lewis acidic and bulky 2 exhibits the reactivity of a frustrated Lewis pair (FLP) and can activate hydrogen and phenylacetylene. Complexes 2 and 3 were found to catalyze the hydrogenation and hydrosilylation of CO2 in the presence of DBU under relatively mild conditions.

Inter-ligand delocalisations in transition metal complexes containing multiple non-innocent ligands

Inter-ligand delocalisation across the metal centre has been identified in a number of coordination complexes and systematically investigated with the help of PIO analysis.

On the Geometrical Stability of Square-Planar Platinum(0) Complexes That Bear a PNP-Pincer-Type Phosphaalkene Ligand (Eind2 -BPEP)

The four-coordinate Pt⁰ complex [Pt(PPh₃ )(Eind₂ -BPEP)] (Eind=1,1,3,3,5,5,7,7-octaethyl-1,2,3,5,6,7-hexahydro-s-indacen-4-yl; BPEP=2,6-bis(1-phenyl-2-phosphaethenyl)pyridine), which bears a PNP-pincer-type phosphaalkene ligand (Eind₂ -BPEP; PNP=N,N-bis(diphenylphosphine)-2,6-diaminopyridine), were found to adopt a square-planar configuration around the Pt center (τ₄ =0.11). This coordination geometry is very uncommon for formal d¹⁰ complexes. In this study, a series of ligands with different electronic properties (i.e., DMAP, 2,6-lutidine, PMe₃ , tBuNC, and CO) were introduced in place of PPh₃ , and their effects on the coordination geometry were examined. X-ray diffraction analysis revealed that all complexes adopted a square-planar configuration (τ₄ =0.20-0.27). In contrast, DFT calculations indicated that the geometrical stability towards distortion around Pt varied with the ligand. The complexes with pyridine-based ligands had rigid planar structures, whereas those with π-accepting ligands, such as CO, were relatively flexible towards distortion. The electronic effects of the ligands were reflected in the spectroscopic properties of the complexes, which showed a large color change in the near-infrared region.

Metal-Ligand Cooperation as Key in Formation of Dearomatized NiII-H Pincer Complexes and in Their Reactivity toward CO and CO2

The unique synthesis and reactivity of [(^RPNP*)NiH] complexes (1a,b), based on metal–ligand cooperation (MLC), are presented (^RPNP* = deprotonated PNP ligand, R = ⁱPr, ^tBu). Unexpectedly, the dearomatized complexes 1a,b were obtained by reduction of the dicationic complexes [(^RPNP)Ni(MeCN)](BF₄)₂ with sodium amalgam or by reaction of the free ligand with Ni⁰(COD)₂. Complex 1b reacts with CO via MLC, to give a rare case of a distorted-octahedral PNP-based pincer complex, the Ni(0) complex 3b. Complexes 1a,b also react with CO₂ via MLC to form a rare example of η¹ binding of CO₂ to nickel, complexes 4a,b. An unusual CO₂ cleavage process by complex 4b, involving C–O and C–P cleavage and C–C bond formation, led to the Ni–CO complex 3b and to the new complex [(PⁱPr₂NC₂O₂)Ni(P(O)ⁱPr₂)] (5b). All complexes have been fully characterized by NMR and X-ray crystallography.

Reactivity studies of an imine-functionalised phosphaalkene; unusual electrostatic and supramolecular stabilisation of a σ2λ3-phosphorus motif via hydrogen bonding

Protonation with strong acids at an imine over addition to a phosphaalkene; resulting adducts display hydrogen bonding.

Cleavage of a P=P Double Bond Mediated by N-Heterocyclic Carbenes

The reaction of the bulky diphosphenes (Rind)P=P(Rind) (1; Rind=1,1,3,3,5,5,7,7-octa-R-substituted s-hydrindacen-4-yl) with two molecules of N-heterocyclic carbene (NHC; 1,3,4,5-tetramethylimidazol-2-ylidene) resulted in the quantitative formation of the NHC-bound phosphinidenes NHC→P(Rind) (2), along with the cleavage of the P=P double bond. The reaction times are dependent on the steric size of the Rind groups (11 days for 2 a (R=Et) and 2 h for 2 b (R=Et, Me) at room temperature). The mechanism for the double bond-breaking is proposed to proceed via the formation of the NHC-coordinated, highly polarized diphospehenes 3 as an intermediate. Approach of a second NHC to 3 induces P-P bond cleavage and P-C bond formation, which proceeds through a transition state with a large negative Gibbs energy change to afford the two molecules of 2, thus being the rate-determining step of the overall reaction with the activation barriers of 80.4 for 2 a and 29.1 kJ mol^-1 for 2 b.