Enhancement of C−H Oxidizing Ability in Co-O2 Complexes through an Isolated Heterobimetallic Oxo Intermediate

Proton-Induced Switching of Paramagnetism: Reversible Conversion between a Low and High Spin CoIII Center within a Heterobimetallic Core

The development of molecular species with switchable magnetic properties has been a long-standing challenge in chemistry. One approach involves binding an analyte, such as protons, to a compound to trigger a change in magnetism. Transition metal complexes have been targeted for this type of magnetic modulation because they can undergo changes in their spin states. However, heterobimetallic complexes have had limited utility because of a lack of ligands that create differentiated structures around each metal center that are often necessary to regulate the electronic and magnetic properties. To circumvent this problem, we have used a tripodal ligand with phosphinic amido groups to prepare a complex with a discrete [CoIII(μ-OH)FeIII] core and an overall system spin of ST = 5/2. Deprotonation readily produces a species with a unique [CoIII(μ-O)FeIII] core and an ST = 1/2 system spin. X-ray diffraction studies, electron paramagnetic resonance spectroscopy, and Mössbauer spectroscopy pinpoint the hexacoordinate CoIII center as the cause of this spin change: the typical SCo = 0 spin state of the CoIII center in the [CoIII(μ-OH)FeIII] complex switches to a rare SCo = 2 spin state in the [CoIII(μ-O)FeIII] analogue; this change turns on antiferromagnetic coupling between the two metal centers. Computational studies link an increase in π bonding within the Co-oxido unit to the change in the CoIII spin state. The conversion is reversible and provides a blueprint for using oxido/hydroxido ligands within a heterobimetallic core to regulate the spin state of a metal site and thus modulate the paramagnetism of a system.

Stabilization of the Compressed Planar Benzene Dianion in Inverse-Sandwich Rare Earth Metal Complexes

For the first time, the capture of the planar antiaromatic parent benzene dianion in between two trivalent rare earth (RE) metal cations (REIII), each stabilized by two guanidinate ligands, is reported. The synthesized inverse-sandwich complexes [{(Me3Si)2NC(NiPr)2}2RE]2(μ-η6 : η6-C6H6), (RE=Y (1), Dy (2), and Er (3)) were crystallized from aprotic solvents and feature a remarkably planar parent benzene dianion, previously not encountered for any metal ion prone to low or absent covalency. The -2 charge localization at the benzene ligand was deduced from the results obtained by single-crystal X-ray diffraction analyses, spectroscopy, magnetometry, and Density Functional Theory (DFT) calculations. In the 1H NMR spectrum of the diamagnetic Y complex 1, the equivalent proton resonance of the bridging benzene dianion ligand is drastically shifted to higher field in comparison to free benzene. This and the calculated highly positive Nucleus-Independent Chemical Shift (NICS) values are attributed to the antiaromatic character of the benzene dianion ligand. The crucial role of the ancillary guanidinate ligand scaffold in stabilizing the planar benzene dianion conformation was also elucidated by DFT calculations. Remarkably, the planarity of the benzene dianion originates from the stabilization of the π-type orbitals of the d-manifold and compression through its strong electrostatic interaction with the two REIII sites.

Synthesis of a potassium capped terminal cobalt-oxido complex

An unusual example of a potassium capped terminal cobalt-oxido complex has been isolated and crystallographically characterized. The synthesis of [tBu,TolDHP]CoOK proceeds from a previously reported parent compound, [tBu,TolDHP]CoOH, via deprotonation with KOtBu. Structural and electronic characterization suggest a weakly coupled dimer in a distinct seesaw geometry with a Co(III) oxidation state and a non-innocent radical ligand.

Isolation and Crystallographic Characterization of an Octavalent Co2O2 Diamond Core

High-valent cobalt oxides play a pivotal role in alternative energy technology as catalysts for water splitting and as cathodes in lithium-ion batteries. Despite this importance, the properties governing the stability of high-valent cobalt oxides and specifically possible oxygen evolution pathways are not clear. One root of this limited understanding is the scarcity of high-valent Co(IV)-containing model complexes; there are no reports of stable, well-defined complexes with multiple Co(IV) centers. Here, an oxidatively robust fluorinated ligand scaffold enables the isolation and crystallographic characterization of a Co(IV)2-bis-μ-oxo complex. This complex is remarkably stable, in stark contrast with previously reported Co(IV)2 species that are highly reactive, which demonstrates that oxy-Co(IV)2 species are not necessarily unstable with respect to oxygen evolution. This example underscores a new design strategy for highly oxidizing transition-metal fragments and provides detailed data on a previously inaccessible chemical unit of relevance to O-O bond formation and oxygen evolution.

A Co(III)-peroxo-arylboronate complex formed by nucleophilic reaction of a Co(III)-peroxo species

In this work, we report the generation and characterization of two new Co(III)-peroxo complexes 2 and 3. 2 is best described as a mononuclear CoIII-(O2) complex that exhibits an 18O-isotope sensitive OO bond stretching vibration at 845(-49) cm-1, indicating a relatively weak peroxo moiety compared to those of other CoIII-(O2) complexes reported previously. Complex 3 is a CoIII-peroxo-arylboronate species having a rare {CoIIIOOBO} five-membered metallocycle, which is structurally characterized using X-ray crystallography. Investigations of the reaction mechanism using density functional theory calculations show that 2 likely undergoes a nucleophilic attack to an arylboronic acid, which is generated by hydrolysis of the BPh4- anion in wet acetonitrile solution, to first form a CoIII-peroxo-arylboronic acid adduct, followed by the loss of one benzene molecule to generate the five-membered metallocycle. The entire reaction is thermodynamically favorable. Taken together, the conversion of 2 to 3 represents the discovery of a novel nucleophilic reactivity that can be carried out by mononuclear Co(III)-peroxo complexes.

Cooperative activation of carbon-hydrogen bonds by heterobimetallic systems

The direct activation of C-H bonds has been a rich and active field of organometallic chemistry for many years. Recently, incredible progress has been made and important mechanistic insights have accelerated research. In particular, the use of heterobimetallic complexes to heterolytically activate C-H bonds across the two metal centers has seen a recent surge in interest. This perspective article aims to orient the reader in this fast moving field, highlight recent progress, give design considerations for further research and provide an optimistic outlook on the future of catalytic C-H functionalization with heterobimetallic complexes.

Alkaline-Earth Metal Mediated Benzene-to-Biphenyl Coupling

Complex [(DIPeP BDI)Ca]2 (C6 H6 ), with a C6 H6 2- dianion bridging two Ca2+ ions, reacts with benzene to yield [(DIPeP BDI)Ca]2 (biphenyl) with a bridging biphenyl2- dianion (DIPeP BDI=HC[C(Me)N-DIPeP]2 ; DIPeP=2,6-CH(Et)2 -phenyl). The biphenyl complex was also prepared by reacting [(DIPeP BDI)Ca]2 (C6 H6 ) with biphenyl or by reduction of [(DIPeP BDI)CaI]2 with KC8 in presence of biphenyl. Benzene-benzene coupling was also observed when the deep purple product of ball-milling [(DIPP BDI)CaI(THF)]2 with K/KI was extracted with benzene (DIPP=2,6-CH(Me)2 -phenyl) giving crystalline [(DIPP BDI)Ca(THF)]2 (biphenyl) (52 % yield). Reduction of [(DIPeP BDI)SrI]2 with KC8 gave highly labile [(DIPeP BDI)Sr]2 (C6 H6 ) as a black powder (61 % yield) which reacts rapidly and selectively with benzene to [(DIPeP BDI)Sr]2 (biphenyl). DFT calculations show that the most likely route for biphenyl formation is a pathway in which the C6 H6 2- dianion attacks neutral benzene. This is facilitated by metal-benzene coordination.

Divergent CO2 Activation by Tuning the Lewis Acid in Iron-Based Bimetallic Systems

Bimetallic motifs mediate the selective activation and functionalization of CO2 in metalloenzymes and some recent synthetic systems. In this work, we build on the nascent concept of bimetallic frustrated Lewis pairs (FLPs) to investigate the activation and reduction of CO2 . Using the Fe0 fragment [(depe)2 Fe] (depe=1,2-bis(diethylphosphino)ethane) as base, we modify the nature of the partner Lewis acid to accomplish a divergent and highly chemoselective reactivity towards CO2 . [Au(PMe2 Ar)]+ irreversibly dissociates CO2 , Zn(C6 F5 )2 and B(C6 F5 )3 yield different CO2 adducts stabilized by push-pull interactions, while Al(C6 F5 )3 leads to a rare heterobimetallic C-O bond cleavage, and thus to contrasting reduced products after exposure to dihydrogen. Computational investigations provide a rationale for the divergent reactivity, while Energy Decomposition Analysis-Natural Orbital for Chemical Valence (EDA-NOCV) method substantiates the heterobimetallic bonding situation.

Mechanistic Studies for Pd(II)(O2) Reduction Generating Pd(0) and H2O: Formation of Pd(OH)2 as a Key Intermediate

Molecular oxygen (O₂) remains to be an ideal yet underutilized feedstock for the oxidative transformation of organic substrates and renewable energy systems such as fuel cells. Palladium (Pd) has shown particular promise in enabling these applications. The present study describes a Pd-mediated O₂ reduction to water via C-H activation of 9,10-dihydroanthracene (DHA) by a Pd(II) η²-peroxo complex 1O₂. The reaction yields stoichiometric anthracene and Pd(0) product 1 and is notable in two respects. First, plots of concentrations of the reaction participants over time have distinctly sigmoidal shapes, indicating that conversion accelerates over time and implying autocatalysis. Second, the reaction proceeds via a genuine monometallic Pd(II) dihydroxide 1(OH)₂ directly observed to grow and decay as an intermediate. Confirming its role as an intermediate, the dihydroxide 1(OH)₂ was found to mediate C-H oxidation of DHA on par in activity with the peroxo compound 1O₂. Mechanistic studies with density functional theory (DFT) calculations suggested that both 1O₂ and 1(OH)₂ react with DHA by hydrogen atom transfer (HAT) and that autocatalysis in the 1O₂ reaction results from oxidative addition of the initial Pd(II) complex 1O₂ to the Pd(0) product 1. This reaction forms a transient bis(μ-oxo) Pd(II) dimer 1O₂1 that is more active in the HAT oxidation of DHA than the initial 1O₂.

Facile Transformations of a Binuclear Cp*Co(II) Diamidonaphthalene Complex to Mixed-Valent Co(II)Co(III), Co(III)(μ-H)Co(III), and Co(III)(μ-OH)Co(III) Derivatives

A diamido-bridged dicobalt complex supported by a diamidonaphthalene ligand, Cp*₂Co₂(μ-1,8-C₁₀H₈(NH)₂) (1), was synthesized, and the reactivity relevant to redox transformations of the Co₂N₂ core was investigated. It was found that the Co(II)-Co(II) bond allows for protonation by [HPPh₃][BF₄] resulting in a bridging hydride, [1H]⁺, with pK_a ∼ 7.6 in CH₂Cl₂. The diamidonaphthalene ligand can stabilize the binuclear system in the Co(II)Co(III) mixed-valent state (1⁺), which is capable of binding CO to afford [1-CO]⁺. Surprisingly, the mixed-valent complex also activates H₂O to furnish a Co(III)Co(III) hydroxy complex [1-OH]⁺ accompanied by release of H₂. The hydroxy ligand in [1-OH]⁺ is exchangeable, as demonstrated by ¹⁸O-labeling experiments on [1-OH]⁺ with H₂¹⁸O that led to the heavier isotopolog [1-¹⁸OH]⁺.

Conversion of E4 (E4 =P4 , As4 , AsP3 ) by Ni(0) and Ni(I) Synthons - A Comparative Study

The reactivity of white phosphorus and yellow arsenic towards two different nickel nacnac complexes is investigated. The nickel complexes [(L1 Ni)2 tol] (1, L1 =[{N(C6 H3 i Pr2 -2,6)C(Me)}2 CH]- ) and [K2 ][(L1 Ni)2 (μ,η1 : 1 -N2 )] (6) were reacted with P4 , As4 and the interpnictogen compound AsP3 , respectively, yielding the homobimetallic complexes [(L1 Ni)2 (μ-η2 ,κ1 :η2 ,κ1 -E4 )] (E=P (2 a), As (2 b), AsP3 (2 c)), [(L1 Ni)2 (μ,η3 : 3 -E3 )] (E=P (3 a), As (3 b)) and [K@18-c-6(thf)2 ][L1 Ni(η1 : 1 -E4 )] (E=P (7 a), As (7 b)), respectively. Heating of 2 a, 2 b or 2 c also leads to the formation of 3 a or 3 b. Furthermore, the reactivity of these compounds towards reduction agents was investigated, leading to [K2 ][(L1 Ni)2 (μ,η2 : 2 -P4 )] (4) and [K@18-c-6(thf)3 ][(L1 Ni)2 (μ,η3 : 3 -E3 )] (E=P (5 a), As (5 b)), respectively. Compound 4 shows an unusual planarization of the initial Ni2 P4 -prism. All products were comprehensively characterized by crystallographic and spectroscopic methods.

Tailoring of electronic and surface structures boosts exciton-triggering photocatalysis for singlet oxygen generation

Arising from reduced dielectric screening, excitonic effects should be taken into account in ultrathin two-dimensional photocatalysts, and a significant challenge is achieving nontrivial excitonic regulation. However, the effect of structural modification on the regulation of the excitonic aspect is at a comparatively early stage. Herein, we report unusual effects of surface substitutional doping with Pt on electronic and surface characteristics of atomically thin layers of Bi₃O₄Br, thereby enhancing the propensity to generate ¹O₂ Electronically, the introduced Pt impurity states with a lower energy level can trap photoinduced singlet excitons, thus reducing the singlet-triplet energy gap by ∼48% and effectively facilitating the intersystem crossing process for efficient triplet excitons yield. Superficially, the chemisorption state of O₂ causes the changes in the magnetic moment (i.e., spin state) of O₂ through electron-mediated triplet energy transfer, resulting a spontaneous spin-flip process and highly specific ¹O₂ generation. These traits exemplify the opportunities that the surface engineering provides a unique strategy for excitonic regulation and will stimulate more research on exciton-triggering photocatalysis for solar energy conversion.

Intramolecular Hydrogen-Bond Interactions Tune Reactivity in Biomimetic Bis(μ-hydroxo)dicobalt Complexes

Active site hydrogen-bond (H-bond) networks represent a key component by which metalloenzymes control the formation and deployment of high-valent transition metal-oxo intermediates. We report a series of dinuclear cobalt complexes that serve as structural models for the nonheme diiron enzyme family and feature a Co₂(μ-OH)₂ diamond core stabilized by intramolecular H-bond interactions. We define the conditions required for the kinetically controlled synthesis of these complexes: [Co₂(μ-OH)₂(μ-OAc)(κ¹-OAc)₂(py^R)₄][PF₆] (1^R), where OAc = acetate and py^R = pyridine with para-substituent R, and we describe a homologous series of 1^R in which the para-R substituent on pyridine is modulated. The solid state X-ray diffraction (XRD) structures of 1^R are similar across the series, but in solution, their ¹H NMR spectra reveal a linear free energy relationship (LFER) where, as R becomes increasingly electron-withdrawing, the intramolecular H-bond interaction between bridging μ-OH and κ¹-acetate ligands results in increasingly "oxo-like" μ-OH bridges. Deprotonation of the bridging μ-OH results in the quantitative conversion to corresponding cubane complexes: [Co₄(μ-O)₄(μ₃-OAc)₄(py^R)₄] (2^R), which represent the thermodynamic sink of self-assembly. These reactions are unusually slow for rate-limiting deprotonation events, but rapid-mixing experiments reveal a 6000-fold rate acceleration on going from R = OMe to R = CN. These results suggest that we can tune reactivity by modulating the μ-OH pK_a in the presence of intramolecular H-bond interactions to maintain stability as the octahedral d⁶ centers become increasingly acidic. Nature may similarly employ dynamic carboxylate-mediated H-bond interactions to control the reactivity of acidic transition metal-oxo intermediates.

Structural and Spectroscopic Evidence for a Side-on Fe(III)-Superoxo Complex Featuring Discrete O-O Bond Distances

The O-O bond length is often used as a structural indicator to determine the valence states of bound O₂ ligands in biological metal-dioxygen intermediates and related biomimetic complexes. Here, we report very distinct O-O bond lengths found for three crystallographic forms (1.229(4), 1.330(4), 1.387(2) Å at 100 K) of a side-on iron-dioxygen species. Despite their different O-O bond distances, all forms possess the same electronic structure of Fe(III)-O₂ ^•-, as evidenced by their indistinguishable spectroscopic features. Density functional theory and ab initio calculations, which successfully reproduce spectroscopic parameters, predict a flat potential energy surface of an η²-O₂ motif binding to the iron center regarding the O-O distance. Therefore, the discrete O-O bond lengths observed likely arise from differential intermolecular interactions in the second coordination sphere. The work suggests that the O-O distance is not a reliable benchmark to unequivocally identify the valence state of O₂ ligands for metal-dioxygen species in O₂-utilizing metalloproteins and synthetic complexes.

Access to Metal Centers and Fluxional Hydride Coordination Integral for CO2 Insertion into [Fe3(μ-H)3]3+ Clusters

CO₂ insertion into tri(μ-hydrido)triiron(II) clusters ligated by a tris(β-diketiminate) cyclophane is demonstrated to be balanced by sterics for CO₂ approach and hydride accessibility. Time-resolved NMR and UV-vis spectra for this reaction for a complex in which methoxy groups border the pocket of the hydride donor (Fe₃H₃L², 4) result in a decreased activation barrier and increased kinetic isotope effect consistent with the reduced sterics. For the ethyl congener Fe₃H₃L¹ (2), no correlation is found between rate and reaction solvent or added Lewis acids, implying CO₂ coordination to an Fe center in the mechanism. The estimated hydricity (50 kcal/mol) based on observed H/D exchange with BD₃ requires Fe-O bond formation in the product to offset an endergonic CO₂ insertion. μ₃-hydride coordination is noted to lower the activation barrier for the first CO₂ insertion event in DFT calculations.

Reactivity of a T-shaped cobalt(I) pincer-complex

The reactivity of a paramagnetic T-shaped cobalt(i) complex, [(iPrboxmi)Co], stabilised by a monoanionic bis(oxazolinylmethylidene)-isoindolate (boxmi) NNN pincer ligand is described. The exposure to carbon monoxide as an additional neutral ligand resulted in the square-planar species [(iPrboxmi)Co(CO)], accompanied by a change in the electronic spin state from S = 1 to S = 0. In contrast, upon treatment with trimethylphosphine the formation of the distorted tetrahedral complex [(iPrboxmi)Co(PMe3)] was observed (S = 1). Reacting [(iPrboxmi)Co] with iodine (I2), organic peroxides (tBu2O2, (SiMe3)2O2) and diphenyldisulphide (Ph2S2) yielded the tetracoordinated complexes [(iPrboxmi)CoI], [(iPrboxmi)Co(OtBu)], [(iPrboxmi)Co(OSiMe3)] and [(iPrboxmi)Co(SPh)], respectively, demonstrating the capability of the boxmi-supported cobalt(i) complex to homolytically cleave bonds and thus its distinct one-electron reactivity. Furthermore, a square-planar cobalt(ii) alkynyl complex [(iPrboxmi)Co(CCArF)] was identified as the main product in the reaction between [(iPrboxmi)Co] and a terminal alkyne, 4-fluoro-1-ethynylbenzene. Putting such species in the context of the previously investigated hydroboration catalysis, its stoichiometric reaction with pinacolborane revealed its potential conversion into a cobalt(ii) hydride complex, thus confirming its original attribution as off-cycle species.

Highly Reactive CoIII,IV2(μ-O)2 Diamond Core Complex That Cleaves C-H Bonds

The selective activation of strong sp³ C-H bonds at mild conditions is a key step in many biological and synthetic transformations and an unsolved challenge for synthetic chemists. In nature, soluble methane monooxygenase (sMMO) is one representative example of nonheme dinuclear iron-dependent enzymes that activate strong sp³ C-H bonds by a high-valent diiron(IV) intermediate Q. To date, synthetic model complexes of sMMO-Q have shown limited abilities to oxidize strong C-H bonds. In this work, we generated a high-valent Co^III,IV₂(μ-O)₂ complex 3 supported by a tetradentate tris(2-pyridylmethyl)amine (TPA) ligand via one-electron oxidation of its Co^III₂(μ-O)₂ precursor 2. Characterization of 2 and 3 using X-ray absorption spectroscopy and DFT calculations showed that both species possess a diamond core structure with a short Co···Co distance of 2.78 Å. Furthermore, 3 is an EPR active species showing an S = 1/2 signal with clearly observable hyperfine splittings originated from the coupling of the ⁵⁹Co nuclear spin with the electronic spin. Importantly, 3 is a highly reactive oxidant for sp³ C-H bonds, and an oxygenation reagent. 3 has the highest rate constant (1.5 M^-1 s^-1 at -60 °C) for oxidizing 9,10-dihydroanthracene (DHA) compared to diamond core complexes of other first-row transition metals including Mn, Fe and Cu reported previously. Specifically, 3 is about 4-5 orders of magnitude more reactive than the diiron analogs Fe^III,IV₂(μ-O)₂ and Fe^IV₂(μ-O)₂ supported by TPA and related ligands. These findings shed light on future development of more reactive approaches for C-H bond activation by bioinspired dicobalt complexes.

Dioxygen Activation with Molybdenum Complexes Bearing Amide-Functionalized Iminophenolate Ligands

Two novel iminophenolate ligands with amidopropyl side chains (HL2 and HL3) on the imine functionality have been synthesized in order to prepare dioxidomolybdenum(VI) complexes of the general structure [MoO₂L₂] featuring pendant internal hydrogen bond donors. For reasons of comparison, a previously published complex featuring n-butyl side chains (L1) was included in the investigation. Three complexes (1–3) obtained using these ligands (HL1–HL3) were able to activate dioxygen in an in situ approach: The intermediate molybdenum(IV) species [MoO(PMe₃)L₂] is first generated by treatment with an excess of PMe₃. Subsequent reaction with dioxygen leads to oxido peroxido complexes of the structure [MoO(O₂)L₂]. For the complex employing the ligand with the n-butyl side chain, the isolation of the oxidomolybdenum(IV) phosphino complex [MoO(PMe₃)(L1)₂] (4) was successful, whereas the respective Mo(IV) species employing the ligands with the amidopropyl side chains were found to be not stable enough to be isolated. The three oxido peroxido complexes of the structure [MoO(O₂)L₂] (9–11) were systematically compared to assess the influence of internal hydrogen bonds on the geometry as well as the catalytic activity in aerobic oxidation. All complexes were characterized by spectroscopic means. Furthermore, molecular structures were determined by single-crystal X-ray diffraction analyses of HL3, 1–3, 9–11 together with three polynuclear products {[MoO(L2)₂]₂(µ-O)} (7), {[MoO(L2)]₄(µ-O)₆} (8) and [C₉H₁₃N₂O]₄[Mo₈O₂₆]·6OPMe₃ (12) which were obtained during the synthesis of reduced complexes of the type [MoO(PMe₃)L₂] (4–6).

Computational Approach to Molecular Catalysis by 3d Transition Metals: Challenges and Opportunities

Computational chemistry provides a versatile toolbox for studying mechanistic details of catalytic reactions and holds promise to deliver practical strategies to enable the rational in silico catalyst design. The versatile reactivity and nontrivial electronic structure effects, common for systems based on 3d transition metals, introduce additional complexity that may represent a particular challenge to the standard computational strategies. In this review, we discuss the challenges and capabilities of modern electronic structure methods for studying the reaction mechanisms promoted by 3d transition metal molecular catalysts. Particular focus will be placed on the ways of addressing the multiconfigurational problem in electronic structure calculations and the role of expert bias in the practical utilization of the available methods. The development of density functionals designed to address transition metals is also discussed. Special emphasis is placed on the methods that account for solvation effects and the multicomponent nature of practical catalytic systems. This is followed by an overview of recent computational studies addressing the mechanistic complexity of catalytic processes by molecular catalysts based on 3d metals. Cases that involve noninnocent ligands, multicomponent reaction systems, metal-ligand and metal-metal cooperativity, as well as modeling complex catalytic systems such as metal-organic frameworks are presented. Conventionally, computational studies on catalytic mechanisms are heavily dependent on the chemical intuition and expert input of the researcher. Recent developments in advanced automated methods for reaction path analysis hold promise for eliminating such human-bias from computational catalysis studies. A brief overview of these approaches is presented in the final section of the review. The paper is closed with general concluding remarks.

Reduction of CO2 by a masked two-coordinate cobalt(i) complex and characterization of a proposed oxodicobalt(ii) intermediate

Fixation and chemical reduction of CO2 are important for utilization of this abundant resource, and understanding the detailed mechanism of C-O cleavage is needed for rational development of CO2 reduction methods. Here, we describe a detailed analysis of the mechanism of the reaction of a masked two-coordinate cobalt(i) complex, L tBuCo (where L tBu = 2,2,6,6-tetramethyl-3,5-bis[(2,6-diisopropylphenyl)imino]hept-4-yl), with CO2, which yields two products of C-O cleavage, the cobalt(i) monocarbonyl complex L tBuCo(CO) and the dicobalt(ii) carbonate complex (L tBuCo)2(μ-CO3). Kinetic studies and computations show that the κN,η6-arene isomer of L tBuCo rearranges to the κ2 N,N' binding mode prior to binding of CO2, which contrasts with the mechanism of binding of other substrates to L tBuCo. Density functional theory (DFT) studies show that the only low-energy pathways for cleavage of CO2 proceed through bimetallic mechanisms, and DFT and highly correlated domain-based local pair natural orbital coupled cluster (DLPNO-CCSD(T)) calculations reveal the cooperative effects of the two metal centers during facile C-O bond rupture. A plausible intermediate in the reaction of CO2 with L tBuCo is the oxodicobalt(ii) complex L tBuCoOCoL tBu, which has been independently synthesized through the reaction of L tBuCo with N2O. The rapid reaction of L tBuCoOCoL tBu with CO2 to form the carbonate product indicates that the oxo species is kinetically competent to be an intermediate during CO2 cleavage by L tBuCo. L tBuCoOCoL tBu is a novel example of a thoroughly characterized molecular cobalt-oxo complex where the cobalt ions are clearly in the +2 oxidation state. Its nucleophilic reactivity is a consequence of high charge localization on the μ-oxo ligand between two antiferromagnetically coupled high-spin cobalt(ii) centers, as characterized by DFT and multireference complete active space self-consistent field (CASSCF) calculations.

Functionalized Self-Assembled Monolayers Bearing Diiminate Complexes Immobilized through Covalently Anchored Ligands

The application of synthetic organic chemistry to the surface chemistry of monolayer arrays adds a novel dimension to the power of these systems for surface modification. This paper describes the elaboration of simple functionalized monolayers into dialdimine and dialdiminate ligands tethered to the monolayer surface. These ligands are then used to coordinate metal ions in an effort to form diiminate complexes with control over their environment and orientation. Ligand anchoring is best achieved through either thiol-ene photochemistry or azide-acetylene "click" chemistry. There is an influence of ligand bulk on some surface transformations, and in some cases reactions that have been reported to be effective on simple, homogeneous monolayer surfaces are not applicable to a more complex monolayer environment. The large excess of solution reagents relative to monolayer surface functionality adds another measure of difficulty to the control of interfacial reactions. In instances where the anchoring chain includes functional groups that can directly interact with metal ions, the metalation of ligand-bearing surfaces resulted in a higher metal ion content than would have been expected from binding only to the diimine ligands.

Investigation of dioxygen activation by copper(ii)–iminate/aminate complexes

Cu^II amidate/iminate complexes activate dioxygen by a ligated to Cu^II, –HCN– moiety.