Social Self-Sorting of Colloidal Families in Co-Assembling Microgel Systems

Polyelectrolyte chain conformation matters in macroscopic supramolecular self-assembly

We demonstrate molecular-conformation-dependent macroscopic supramolecular self-assembly (MSA) driven by electrostatic interactions. Evidence from single molecular force spectroscopy reveals that polyelectrolytes modified on MSA component surfaces make MSA possible with a loop conformation, while those with a flat conformation lead to no assembly, which is attributed to distinct molecular mobility. We believe that this finding is also applicable in fundamental phenomena such as surface adsorption and adhesion regarding polymers.

Transient co-assemblies of micron-scale colloids regulated by ATP-fueled reaction networks

Self-assembly of colloidal particles offers an attractive bottom-up approach to functional materials. Current design strategies for colloidal assemblies are mostly based on thermodynamically controlled principles and lack autonomous behavior. The next advance in the properties of colloidal assemblies will come from coupling these structures to out-of-equilibrium chemical reaction networks furnishing them with autonomous and dynamic behavior. This, however, constitutes a major challenge of carefully modulating the interparticle potentials on a temporal circuit program and avoiding kinetic trapping and irreversible aggregation. Herein, we report the coupling of a fuel-driven DNA-based enzymatic reaction network (ERN) to micron-sized colloidal particles to achieve their transient co-assembly. The ERN operating on the molecular level transiently releases an Output strand which links two DNA functionalized microgel particles together into co-assemblies with a programmable assembly lifetime. The system generates minimal waste and recovers all components of the ERN after the consumption of the ATP fuel. The system can be reactivated by addition of new fuel as shown for up to three cycles. The design can be applied to organize other building blocks into hierarchical structures and materials with advanced biomimetic properties.

Orthogonal Light-Dependent Membrane Adhesion Induces Social Self-Sorting and Member-Specific DNA Communication in Synthetic Cell Communities

Developing orthogonal chemical communication pathways in diverse synthetic cell communities is a considerable challenge due to the increased crosstalk and interference associated with large numbers of different types of sender-receiver pairs. Herein, the authors control which sender-receiver pairs communicate in a three-membered community of synthetic cells through red and blue light illumination. Semipermeable protein-polymer-based synthetic cells (proteinosomes) with complementary membrane-attached protein adhesion communicate through single-stranded DNA oligomers and synergistically process biochemical information within a community consisting of one sender and two different receiver populations. Different pairs of red and blue light-responsive protein-protein interactions act as membrane adhesion mediators between the sender and receivers such that they self-assemble and socially self-sort into different multicellular structures under red and blue light. Consequently, distinct sender-receiver pairs come into the signaling range depending on the light illumination and are able to communicate specifically without activation of the other receiver population. Overall, this work shows how photoswitchable membrane adhesion gives rise to different self-sorting protocell patterns that mediate member-specific DNA-based communication in ternary populations of synthetic cells and provides a step towards the design of orthogonal chemical communication networks in diverse communities of synthetic cells.

pH-feedback systems to program autonomous self-assembly and material lifecycles

pH-responsive systems have gained importance for the development of smart materials and for biomedical applications because they can switch between different states by simple acid/base triggers. However, such equilibrium systems lack the autonomous behaviour that is so ubiquitous in living systems that self-regulate out of equilibrium. As a contribution to the emerging field of autonomous chemical systems, we have developed pH-feedback systems (pH-FS) based on the coupling of acid- and base-producing steps in chemical reaction networks. The resulting autonomous nonlinear pH curves can be coupled with a variety of pH-sensitive building blocks to program the lifecycles of the associated transient state at the level of self-assemblies and material systems. In this article, we discuss the different generations of such pH-feedback systems, the principles of their coupling to self-assemblies with lifecycles and highlight emerging concepts for the design of autonomous functional materials. The specificity, robustness, and flexible operation of such pH-FS can also be used to realize chemo-structural and chemo-mechanical feedbacks that extend the behaviour of such materials systems toward complex and functional life-like systems.

Macroscopic Supramolecular Assembly of Rigid Building Blocks Facilitated by Layer-By-Layer Assembled Microgel Film

Macroscopic supramolecular assembly (MSA) of building blocks larger than 1 μm provides new methodology for fabrication of functional supramolecular materials and a platform for mechanism investigation of interfacial phenomena. Most reports on MSA are restricted to soft hydrogels, and supramolecular groups can be directly integrated into a hydrogel matrix to generate sufficient attraction for maintaining macroscopic assemblies. For non-hydrogel stiff building blocks, two layer-by-layer modification processes consisting of flexible spacing coating and additional interacting groups are necessary to enable MSA, which is laborious and time-consuming. Approaches for highly efficient MSA based on flexible spacing coating are desired. In this work, MSA of polydimethylsiloxane (PDMS) building blocks is demonstrated by inducing microgel films that serve as both flexible spacing coating and surface functional groups, thus avoiding a two-step LbL modification process. By the varying bilayer number of microgel films, the MSA probability of modified PDMS increases from 54% at 3 bilayers to 100% at 6 bilayers. Control experiments and in situ force measurement strongly support the obtained MSA results and verify the dominant role of the microgel film as a flexible spacing coating and a supramolecularly interactive layer in achieving MSA. Moreover, the underlying mechanism is interpreted as low Young's modulus microgel films rendering surface groups highly mobile to enhance the multivalent interfacial binding. Taken together, this work has demonstrated the feasibility of MSA of rigid building blocks assisted by microgel films as flexible spacing coating and supramolecularly interactive layer simultaneously, which may extend the application fields of microgel materials to interfacial adhesion and advanced manufacturing with MSA methodology.

Self-Regulating Colloidal Co-Assemblies That Accelerate Their Own Destruction via Chemo-Structural Feedback

Biological self‐assemblies self‐ and cross‐regulate each other via chemical reaction networks (CRNs) and feedback. Although artificial transient self‐assemblies have been realized via activation/deactivation CRNs, the transient structures themselves do mostly not engage in the CRN. We introduce a rational design approach for chemo‐structural feedback, and present a transient colloidal co‐assembly system, where the formed co‐assemblies accelerate their destruction autonomously. We achieve this by immobilizing enzymes of a deactivating acid‐producing enzymatic cascade on pH‐switchable microgels that can form co‐assemblies at high pH. Since the enzyme partners are immobilized on individual microgels, the co‐assembled state brings them close enough for enhanced acid generation. The amplified deactivator production (acid) leads to an almost two‐fold reduction in the lifetime of the transiently formed pH‐state. Our study thus introduces versatile mechanisms for chemo‐structural feedback.

Application of "smart" multifunctional nanoprobes in tumor diagnosis and treatment

Cancer is one of the major diseases that pose a threat to human health and life, especially because it is difficult to diagnose and cure, and recurs easily. In recent years, the development of nanotechnology has provided researchers with new tools for cancer treatment. In particular, nanoprobes that facilitate integrated diagnosis and treatment, high-resolution imaging, and accurate tumor targeting provide new avenues for the early detection and treatment of cancer. This review focuses on the preparations and applications of two kinds of "smart" multifunctional nanoprobes: "Off-On" nanoprobes and "Charge-Reversal" nanoprobes. This review also briefly discusses their mechanisms of action, as they could provide new ideas for the further development of this field.

Self-sorting assembly of artificial building blocks

Self-assembly to build high-level structures, which is ubiquitous in living systems, has captured the imagination of scientists, striving to emulate the intricacy, homogeneity and versatility of the naturally occurring systems, and to pursue a similar level of organization in artificial building blocks. In particular, self-sorting assembly in multicomponent systems, based on the spontaneous recognition and consequent spatial aggregation of the same or interactive building units, is able to realize very complicated assembly behaviours, and usually results in multiple well-ordered products or hierarchical structures in a one-step manner. This highly efficient assembly strategy has attracted tremendous research attention in recent years, and numerous examples have been reported in artificial systems, particularly with supramolecular and polymeric building blocks. In the current review, we summarize the progress in recent years, and classify them into five main categories, based on their working mechanisms or principles. With the review of these strategies, we hope to provide not only some deep insights into this field, but also and more importantly, useful thoughts in the design and fabrication of self-sorting systems in the future.

Controlling Photoluminescence and Photocatalysis Activities in Lead-Free Cs2 Ptx Sn1-x Cl6 Perovskites via Ion Substitution

Lead-free halide perovskites have triggered interest in the field of optoelectronics and photocatalysis because of their low toxicity, and tunable optical and charge-carrier properties. From an application point of view, it is desirable to develop stable multifunctional lead-free halide perovskites. We have developed a series of Cs₂ Pt_x Sn_1-x Cl₆ perovskites (0≤x≤1) with high stability, which show switchable photoluminescence and photocatalytic functions by varying the amount of Pt⁴⁺ substitution. A Cs₂ Pt_x Sn_1-x Cl₆ solid solution with a dominant proportion of Pt⁴⁺ shows broadband photoluminescence with a lifetime on the microsecond timescale. A Cs₂ Pt_x Sn_1-x Cl₆ solid solution with a small amount of Pt⁴⁺ substitution exhibits photocatalytic hydrogen evolution activity. An optical spectroscopy study reveals that the switch between photoluminescence and photocatalysis functions is controlled by sub-band gap states. Our finding provides a new way to develop lead-free multifunctional halide perovskites with high stability.

Wavelength-Gated Adaptation of Hydrogel Properties via Photo-Dynamic Multivalency in Associative Star Polymers

Responsive materials, such as switchable hydrogels, have been largely engineered for maximum changes between two states. In contrast, adaptive systems target distinct functional plateaus between these maxima. Here, we demonstrate how the photostationary state (PSS) of an E/Z-arylazopyrazole photoswitch can be tuned by the incident wavelength across a wide color spectrum, and how this behavior can be exploited to engineer the photo-dynamic mechanical properties of hydrogels based on multivalent photoswitchable interactions. We show that these hydrogels adapt to the wavelength-dependent PSS and the number of arylazopyrazole units by programmable relationships. Hence, our material design enables the facile adjustment of the mechanical properties without laborious synthetic efforts. The concept goes beyond the classical switching from state A to B, and demonstrates pathways for a truly wavelength-gated adaptation of hydrogel properties potentially useful to engineer cell fate or in soft robotics.

pH Tuning of Water-Soluble Arylazopyrazole Photoswitches

Arylazopyrazoles are an emerging class of photoswitches with redshifted switching wavelength, high photostationary states, long thermal half-lives and facile synthetic access. Understanding pathways for a simple modulation of the thermal half-lives, while keeping other parameters of interest constant, is an important aspect for out-of-equilibrium systems design and applications. Here, it is demonstrated that the thermal half-life of a water-soluble PEG-tethered arylazo-bis(o-methylated)pyrazole (AAP) can be tuned by more than five orders of magnitude using simple pH adjustment, which is beyond the tunability of azobenzenes. The mechanism of thermal relaxation is investigated by thorough spectroscopic analyses and density functional theory (DFT) calculations. Finally, the concepts of a tunable half-life are transferred from the molecular scale to the material scale. Based on the photochromic characteristics of E- and Z-AAP, transient information storage is showcased in form of light-written patterns inside films cast from different pH, which in turn leads to different times of storage. With respect to prospective precisely tunable materials and time-programmed out-of-equilibrium systems, an externally tunable half-life is likely advantageous over changing the entire system by the replacement of the photoswitch.

Orthogonal Blue and Red Light Controlled Cell-Cell Adhesions Enable Sorting-out in Multicellular Structures

The self-assembly of different cell types into multicellular structures and their organization into spatiotemporally controlled patterns are both challenging and extremely powerful to understand how cells function within tissues and for bottom-up tissue engineering. Here, we not only independently control the self-assembly of two cell types into multicellular architectures with blue and red light, but also achieve their self-sorting into distinct assemblies. This required developing two cell types that form selective and homophilic cell–cell interactions either under blue or red light using photoswitchable proteins as artificial adhesion molecules. The interactions were individually triggerable with different colors of light, reversible in the dark, and provide noninvasive and temporal control over the cell–cell adhesions. In mixtures of the two cells, each cell type self-assembled independently upon orthogonal photoactivation, and cells sorted out into separate assemblies based on specific self-recognition. These self-sorted multicellular architectures provide us with a powerful tool for producing tissue-like structures from multiple cell types and investigate principles that govern them.

ATP-powered molecular recognition to engineer transient multivalency and self-sorting 4D hierarchical systems

Biological systems organize multiple hierarchical structures in parallel, and create dynamic assemblies and functions by energy dissipation. In contrast, emerging artificial non-equilibrium self-assembling systems have remained relatively simplistic concerning hierarchical design, and non-equilibrium multi-component systems are uncharted territory. Here we report a modular DNA toolbox allowing to program transient non-equilibrium multicomponent systems across hierarchical length scales by introducing chemically fueled molecular recognition orchestrated by reaction networks of concurrent ATP-powered ligation and cleavage of freely programmable DNA building blocks. Going across hierarchical levels, we demonstrate transient side-chain functionalized nucleic acid polymers, and further introduce the concept of transient cooperative multivalency as a key to bridge length scales to pioneer fuel-driven encapsulation, self-assembly of colloids, and non-equilibrium transient narcissistic colloidal self-sorting on a systems level. The fully programmable and functionalizable DNA components pave the way to design chemically fueled 4D (3 space, 1 time) molecular multicomponent systems and autonomous materials.

Three-Dimensional Visualization for Early-Stage Evolution of Polymer Aging

Monitoring the evolution of polymer aging, especially early-stage aging, over both time and dimensionality can provide in-depth insight into aging-induced material invalidation and even disastrous accidents. However, it remains a great challenge because currently available methods for polymer aging only provide statistic results at a macroscopic scale. Herein, we report the first three-dimensional early-stage visualization (ESV) technique of polymer aging by using the fluorophore-bonded boronic acid to specifically target aging-induced hydroxyl groups through the B-O click reaction. This method can identify the initial aging of polypropylene (PP) as early as 20.0 min. In contrast, no signals can be detected by conventional infrared spectroscopy even after 21 days of thermal treatment. More importantly, the three-dimensional evolution for early-stage polymer aging was demonstrated: faster aggression in the horizontal plane (4.1 × 10-4 s-1) than in the vertical direction (2.6 × 10-9 m s-1) for PP films. The approach could undoubtedly provide valuable information in elucidating mechanistic details of polymer aging in three-dimensional scale and assessing the utility of advanced antiaging materials.

The Importance of Cell-Cell Interaction Dynamics in Bottom-Up Tissue Engineering: Concepts of Colloidal Self-Assembly in the Fabrication of Multicellular Architectures

Building tissue from cells as the basic building block based on principles of self-assembly is a challenging and promising approach. Understanding how far principles of self-assembly and self-sorting known for colloidal particles apply to cells remains unanswered. In this study, we demonstrate that not just controlling the cell-cell interactions but also their dynamics is a crucial factor that determines the formed multicellular structure, using photoswitchable interactions between cells that are activated with blue light and reverse in the dark. Tuning dynamics of the cell-cell interactions by pulsed light activation results in multicellular architectures with different sizes and shapes. When the interactions between cells are dynamic, compact and round multicellular clusters under thermodynamic control form, while otherwise branched and loose aggregates under kinetic control assemble. These structures parallel what is known for colloidal assemblies under reaction- and diffusion-limited cluster aggregation, respectively. Similarly, dynamic interactions between cells are essential for cells to self-sort into distinct groups. Using four different cell types, which expressed two orthogonal cell-cell interaction pairs, the cells sorted into two separate assemblies. Bringing concepts of colloidal self-assembly to bottom-up tissue engineering provides a new theoretical framework and will help in the design of more predictable tissue-like structures.

Supracolloidal Self-Assembly of Divalent Janus 3D DNA Origami via Programmable Multivalent Host/Guest Interactions

We introduce divalent 3D DNA origami cuboids as truly monodisperse colloids and harness their ability for precision functionalization with defined patches and defined numbers of supramolecular binding motifs. We demonstrate that even adamantane/β-cyclodextrin host/guest inclusion complexes of moderate association strength can induce efficient supracolloidal fibrillization at high dilution of the 3D DNA Origami as a result of cooperative multivalency. We show details on the assembly of Janus and non-Janus 3D DNA origami into supracolloidal homo- and heterofibrils with respect to multivalency effects, electrostatic screening, and stoichiometry. We believe that the merger of 3D DNA origami with colloidal self-assembly and supramolecular motifs provides new synergies at the interface of these disciplines to better understand multivalency effects, to promote structural complexity, and add non-DNA assembling and switching mechanisms to DNA nanoscience.

Visualization of materials using the confocal laser scanning microscopy technique

The development of materials science always benefits from advanced characterizations. Currently, imaging techniques are of great technological importance in both fundamental and applied research on materials. In comparison to conventional visualization methods, confocal laser scanning microscopy (CLSM) is non-invasive, with macroscale and high-contrast scanning, a simple and fast sample preparation procedure as well as easy operation. In addition, CLSM allows rapid acquisition of longitudinal and cross-sectional images at any position in a material. Therefore, the CLSM-based visualization technique could provide direct and model-independent insight into material characterizations. This review summarizes the recent applications of CLSM in materials science. The current CLSM approaches for the visualization of surface structures, internal structures, spatial structures and reaction processes are discussed in detail. Finally, we provide our thoughts and predictions on the future development of CLSM in materials science. The purpose of this review is to guide researchers to build a suitable CLSM approach for material characterizations, and to open viable opportunities and inspirations for the development of new strategies aiming at the preparation of advanced materials. We hope that this review will be useful for a wide range of research communities of materials science, chemistry, and engineering.

Mutualistic benefit in the self-sorted co-aggregates of peri-naphthoindigo and a 4-amino-1,8-naphthalimide derivative

Photoluminescence enhancement for all the members of a self-sorted co-aggregate was observed for the first time by successfully amalgamating AIEE and social self-sorting. Intermolecular H-bonding and π-π stacking were utilised to prepare several co-aggregates of peri-naphthoindigo (PNI) and a 4-amino-1,8-naphthalimide derivative dye, NH₂-NMI. In the heteromeric aggregates, photoluminescence intensities were increased by 28% for the imide and more than 400% for PNI. Due to spectral overlap between the emission of the imide and the absorption of PNI, energy transfer took place from the former to the latter. The heteromeric aggregates are dual emissive and the relative intensities of the emissions can easily be tuned by varying the stoichiometry of the dyes.

Reversible end-to-end assembly of selectively functionalized gold nanorods by light-responsive arylazopyrazole-cyclodextrin interaction

We propose a two-step ligand exchange for the selective end-functionalization of gold nanorods (AuNR) by thiolated cyclodextrin (CD) host molecules. As a result of the complete removal of the precursor capping agent cetyltrimethylammonium bromide (CTAB) by a tetraethylene glycol derivative, competitive binding to the host cavity was prevented, and reversible, light-responsive assembly and disassembly of the AuNR could be induced by host-guest interaction of CD on the nanorods and a photoswitchable arylazopyrazole cross-linker in aqueous solution. The end-to-end assembly of AuNR could be effectively controlled by irradiation with UV and visible light, respectively, over four cycles. By the introduction of AAP, previous disassembly limitations based on the photostationary states of azobenzenes could be solved. The combination photoresponsive interaction and selectively end-functionalized nanoparticles shows significant potential in the reversible self-assembly of inorganic-organic hybrid nanomaterials.

Independent Blue and Red Light Triggered Narcissistic Self-Sorting Self-Assembly of Colloidal Particles

The ability of living systems to self-sort different cells into separate assemblies and the ability to independently regulate different structures are one ingredient that gives rise to their spatiotemporal complexity. Here, this self-sorting behavior is replicated in a synthetic system with two types of colloidal particles; where each particle type independently self-assembles either under blue or red light into distinct clusters, known as narcissistic self-sorting. For this purpose, each particle type is functionalized either with the light-switchable protein VVDHigh or Cph1, which homodimerize under blue and red light, respectively. The response to different wavelengths of light and the high specificity of the protein interactions allows for the independent self-assembly of each particle type with blue or red light and narcissistic self-sorting. Moreover, as both of the photoswitchable protein interactions are reversible in the dark; also, the self-sorting is reversible and dynamic. Overall, the independent blue and red light controlled self-sorting in a synthetic system opens new possibilities to assemble adaptable, smart, and advanced materials similar to the complexity observed in tissues.

Macroscopic supramolecular assembly of rigid hydrogels assisted by a flexible spacing coating

To address the difficult challenge of realizing macroscopic supramolecular assembly (MSA) of high-modulus hydrogels, we propose a strategy of introducing a flexible spacing coating to improve the surface compliance for efficient MSA, which holds promise to develop versatile MSA methods for fabricating hydrogel-based tissue scaffolds, and to provide insight into the MSA mechanism.

Apparent strength versus universality in glasses of soft compressible colloids

Microgel colloids, solvent swollen hydrogel particles of microscopic size, are in osmotic equilibrium with their surroundings. This has a profound effect on the behaviour of dense solutions of these polymeric colloids, most notably their ability to swell and deswell depending on the osmotic pressure of the system as a whole. Here we develop a minimal simulation model to treat this intrinsic volume regulation in order to explore the effects this has on the properties of dense solutions close to a liquid-solid transition. We demonstrate how the softness dependent volume regulation of particles gives rise to an apparent change in the fragility of the colloidal glass transition, which can be scaled out through the use of an adjusted volume fraction that accounts for changes in particle size. Moreover, we show how the same model can be used to explain the selective deswelling of soft microgels in a crystalline matrix of harder particles leading to robust crystals free of defects. Our results not only highlight the non-trivial effects of osmotic regulation in governing the apparent physics of microgel suspensions, but also provides a platform to efficiently account for particle deswelling in simulations.

Reversible Social Self-Sorting of Colloidal Cell-Mimics with Blue Light Switchable Proteins

Toward the bottom-up assembly of synthetic cells from molecular building blocks, it is an ongoing challenge to assemble micrometer sized compartments that host different processes into precise multicompartmental assemblies, also called prototissues. The difficulty lies in controlling interactions between different compartments dynamically both in space and time, as these interactions determine how they organize with respect to each other and how they work together. In this study, we have been able to control the self-assembly and social self-sorting of four different types of colloids, which we use as a model for synthetic cells, into two separate families with visible light. For this purpose we used two photoswitchable protein pairs (iLID/Nano and nHagHigh/pMagHigh) that both reversibly heterodimerize upon blue light exposure and dissociate from each other in the dark. These photoswitchable proteins provide noninvasive, dynamic, and reversible remote control under biocompatible conditions over the self-assembly process with unprecedented spatial and temporal precision. In addition, each protein pair brings together specifically two different types of colloids. The orthogonality of the two protein pairs enables social self-sorting of a four component mixture into two distinct families of colloidal aggregates with controlled arrangements. These results will ultimately pave the way for the bottom-up assembly of multicompartment synthetic prototissues of a higher complexity, enabling us to control precisely and dynamically the organization of different compartments in space and time.

Supramolecular Hydrogel Based on pNIPAm Microgels Connected via Host⁻Guest Interactions

In this work, host⁻guest supramolecular hydrogels were prepared from poly(N-isopropylacrylamide) (pNIPAm) microgels utilizing electrostatic and host/guest self-assembly. First, pNIPAm microgels bearing a poly(acrylic acid) (pAAc) shell were coated with positively charged β-cyclodextrin polymers. Addition of adamantane-substituted dextrans (Dex-Ada) allowed us to establish interparticle connections through β-cyclodextrin-adamantane (βCD-Ada) inclusion complex formation, and thus to prepare hierarchical hydrogels. Under the conditions of hydrogel formation, close contact between the microgels was ensured. To the best of our knowledge, this is the first example of doubly crosslinked microgels prepared by noncovalent crosslinking via host⁻guest interactions. The prepared macrogels were studied with rheology, and fast mechanical response to temperature variation was found. Furthermore, the hydrogels exhibit fully reversible temperature-induced gel⁻sol transition at the physiological temperature range (37⁻41 °C), due to the synergetic effect between shrinking of the microgels and dissociation of βCD-Ada crosslinks at higher temperatures. This opens up attractive prospects of their potential use in biomedical applications.

Macroscopic Supramolecular Assembly through Electrostatic Interactions Based on a Flexible Spacing Coating

Macroscopic supramolecular assembly (MSA) is a recent advance in supramolecular chemistry that involves associating large building blocks with a size larger than 10 µm through noncovalent interactions. However, until now the applicable material system is rather limited to hydrogels, and MSA of rigid materials with supramolecular interactions widely used in molecular assembly has rarely been reported due to the difficulty in achieving multivalency between rigid surfaces. Herein, the concept of flexible spacing coating is applied with highly flowable properties, and the electrostatic-interaction-driven MSA of relatively rigid polydimethylsiloxane building blocks is demonstrated. With the flexible spacing coating of a polyelectrolyte multilayer, the oppositely charged rigid building blocks can realize MSA under shaking in water for 5 min. The major contribution of the electrostatic interaction is confirmed by both qualitative controlled MSA experiments in other solvents, disassembly in ionic solution and quantitative results with an in situ force measurement method.

Light induced assembly and self-sorting of silica microparticles

To tailor the properties of colloidal materials, precise control over the self-assembly of their constituents is a prerequisite. Here, we govern the assembly of silica particles by functionalization with supramolecular moieties which interact with each other via directional and reversible hydrogen bonding. Through a generally applicable synthesis protocol, two different types of self-complementary hydrogen bonding moieties, BTA- and UPy-derivatives, are anchored to silica particles. Their self-assembly is initiated by the UV-induced removal of a photolabile protecting group, allowing the formation of hydrogen bonds between tethered molecules. The light-induced assembly of BTA- and UPy-decorated colloids in single-component dispersions and colloidal self-sorting in mixed dispersions is studied. Furthermore, we demonstrate that UPy-colloids can dissasemble upon addition of traces of a competitive binder (NaPy). This work provides further insight into the utility of supramolecular handles to orchestrate the assembly of micron-sized colloids via non-oligonucleotide hydrogen-bonding units.

Host-Guest Complexes of Cyclodextrins and Nanodiamonds as a Strong Non-Covalent Binding Motif for Self-Assembled Nanomaterials

We report the inclusion of carboxy- and amine-substituted molecular nanodiamonds (NDs) adamantane, diamantane, and triamantane by β-cyclodextrin and γ-cyclodextrin (β-CD and γ-CD), which have particularly well-suited hydrophobicity and symmetry for an optimal fit of the host and guest molecules. We studied the host-guest interactions in detail and generally observed 1:1 association of the NDs with the larger γ-CD cavity, but observed 1:2 association for the largest ND in the series (triamantane) with β-CD. We found higher binding affinities for carboxy-substituted NDs than for amine-substituted NDs. Additionally, cyclodextrin vesicles (CDVs) were decorated with d-mannose by using adamantane, diamantane, and triamantane as non-covalent anchors, and the resulting vesicles were compared with the lectin concanavalin A in agglutination experiments. Agglutination was directly correlated to the host-guest association: adamantane showed lower agglutination than di- or triamantane with β-CDV and almost no agglutination with γ-CDV, whereas high agglutination was observed for di- and triamantane with γ-CDV.

Switchable Supracolloidal Coassembly of Microgels Mediated by Host/Guest Interactions

Supramolecular engineering of multibody colloidal systems provides flexible ways of manipulating superstructures and material properties. We investigate a coassembling microgel (MG) system, in which host- and guest-modified MG partners coassemble by molecular recognition, and show in detail how electrostatic repulsion needs to be balanced for the supramolecular recognition to take place. We observe a gradual change from repellent MGs to stable clusters and ordered flocculates upon decreasing electrostatic repulsion. The adaptive nature of the multivalent interactions embedded in the soft MG shell leads to kinetically trapped scenarios and fibril formation from spherical building blocks.

Self-assembly of colloidal molecules that respond to light and a magnetic field

Janus particles with polymer caps self-assemble into dual responsive particle chains that can be manipulated with light and a magnetic field.