Particle shape anisotropy in pickering interfacial catalysis for Knoevenagel condensation

Dispersions of two immiscible liquids stabilized by solid particles are termed as Pickering emulsions. Stability of such emulsions is affected by various parameters such as amount of solid particle, method of emulsification, size, and shape of particles, etc. In this study, MgO samples prepared by different methods and characterized by XRD, FESEM, HRTEM, DLS, and CO2-TPD techniques were utilized for stabilizing o/w Pickering emulsions. The effect of particle shape on Pickering Interfacial Catalysis (PIC) for Knoevenagel condensation was investigated. It was found that in the case of rod and plate shaped particles, emulsion stability and catalytic activity were higher as compared to those obtained with other MgO samples prepared. The applicability of the MgO-PIC system is also successfully demonstrated for gram scale synthesis (85 % yield in 30 min). The MgO-PIC system was found to be reusable for at least five cycles without substantial loss in activity.

Charge Regulation at the Nanoscale as Evidenced from Light-Responsive Nanoemulsions

Emulsions are indispensable in everyday life, and the demand for emulsions' diversity and control of properties is therefore substantial. As emulsions possess a high internal surface area, an understanding of the oil/water (o/w) interfaces at the molecular level is fundamental but often impaired by experimental limitations to probe emulsion interfaces in situ. Here, we have used light-responsive surfactants (butyl-AAP) that can photoisomerize between E and Z isomers by visible and UV light irradiation to tune the emulsion interfaces. This causes massive changes in the interface tension at the extended o/w interfaces in macroemulsions and a drastic shift in the surfactants' critical micelle concentration, which we show can be used to control both the stability and phase separation. Strikingly different from macroemulsions are nanoemulsions (RH ∼90 nm) as these are not susceptible to E/Z photoisomerization of the surfactants in terms of changes in their droplet size or ζ-potential. However, in situ second-harmonic scattering and pulsed-field gradient nuclear magnetic resonance (NMR) experiments show dramatic and reversible changes in the surface excess of surfactants at the nanoscopic interfaces. The apparent differences in ζ-potentials and surface excess provide evidence for a fixed charge to particle size ratio and the need for counterion condensation to renormalize the particle charge to a critical charge, which is markedly different compared to the behavior of very large particles in macroemulsions. Thus, our findings may have broader implications as the electrostatic stabilization of nanoparticles requires much lower surfactant concentrations, allowing for a more sustainable use of surfactants.

Nanoparticle-Empowered Core-Shell Microcapsules: From Architecture Design to Fabrication and Functions

Compartmentalization is a powerful concept to integrate multiscale components with diverse functionalities into miniature architectures. Inspired by evolution-optimized cell compartments, synthetic core-shell capsules enable storage of actives and on-demand delivery of programmed functions, driving scientific progress across various fields including adaptive materials, sustainable electronics, soft robotics, and precision medicine. To simultaneously maximize structural stability and environmental sensitivity, which are the two most critical characteristics dictating performance, diverse nanoparticles are incorporated into microcapsules with a dense shell and a liquid core. Recent studies have revealed that these nano-additives not only enhance the intrinsic properties of capsules including mechanical robustness, optical behaviors, and thermal conductivity, but also empower dynamic features such as triggered release, deformable structures, and fueled mobility. In this review, the physicochemical principles that govern nanoparticle assembly during microencapsulation are examined in detail and the architecture-controlled functionalities are outlined. Through the analysis of how each primary method implants nanoparticles into microcapsules, their distinct spatial organizations within the core-shell structures are highlighted. Following a detailed discussion of the specialized functions enabled by specific nanoparticles, the vision of the required fundamental insights and experimental studies for this class of microcarriers to fulfill its potential are sketched.

Surface morphology regulation of colloidal Nanoparticles: A convenient Kinetically-Controlled seeded growth strategy

HYPOTHESIS

Except for chemical composition, surface morphology may endue colloidal nanoparticles with special interfacial behaviors, which is highly desired in certain scenarios, for example, ultra-stable Pickering emulsion for pharmaceutical applications where only limited chemicals are allowed. Herein, silica colloidal nanoparticle was chosen as a demo to illustrate a kinetically-controlled seeded growth strategy for the surface morphology regulation of colloidal nanoparticles.

EXPERIMENTS

Surface chemical heterogeneity was primarily introduced to the silica seed nanoparticles by a seeded growth process in the presence of mixed silicate moieties with thermodynamical incompatibility. Then a further kinetically-controlled seeded growth step was performed to regulate the surface morphology of silica nanoparticles by promoting the selective condensation of tetraethoxysilane on the hydrophilic microdomains.

FINDINGS

Upon reducing the growing rate, tetraethoxysilane hydrolysates tend to condensate on silica microdomains, resulting in the formation of raspberry-like nanoparticles. The generality of the kinetically-controlled seeded growth strategy was validated by its success on differently-sized silica seeds modified with a range of silane coupling agents. This established strategy is facile and effective for massive production of raspberry-like silica colloidal nanoparticles with precisely-designed surface morphology and size, offering an ideal platform for the investigation on the exclusive contribution of morphology to the interfacial behaviors of nanoparticles.

Recent Progress toward Physical Stimuli-Responsive Emulsions

Emulsion as a fine dispersion of immiscible liquids has involved widespread applications in industry, pharmaceuticals, agriculture and personal care. Stimuli-responsive emulsions capable of on-demand demulsification or changing their properties are required in many cases such as controllable release cargo, oil recovery, emulsifiers recycle and product separation, great progress has been achieved in these areas. Among these various triggers, much effort has been made to develop physical stimuli, due to the noninvasive and environmentally friendly characteristics. Physical stimuli-responsive emulsions provide a plenty of valuable practical applications in the fields of sustainable industry, biomedical reaction, drug delivery. Here, we summarize the recent development in the field of emulsions in response to physical stimuli consisting of temperature, light, magnetic field, electrical field, etc. The preparation methods and mechanisms of physical stimuli-responsive emulsions and their applications of catalysis reaction, drug delivery, and oil recovery are highlighted in this review. The future directions and outstanding problems of the physical stimuli-responsive emulsions are also discussed. This article is protected by copyright. All rights reserved.

Hollow structures as drug carriers: Recognition, response, and release

Hollow structures have demonstrated great potential in drug delivery owing to their privileged structure, such as high surface-to-volume ratio, low density, large cavities, and hierarchical pores. In this review, we provide a comprehensive overview of hollow structured materials applied in targeting recognition, smart response, and drug release, and we have addressed the possible chemical factors and reactions in these three processes. The advantages of hollow nanostructures are summarized as follows: hollow cavity contributes to large loading capacity; a tailored structure helps controllable drug release; variable compounds adapt to flexible application; surface modification facilitates smart responsive release. Especially, because the multiple physical barriers and chemical interactions can be induced by multishells, hollow multishelled structure is considered as a promising material with unique loading and releasing properties. Finally, we conclude this review with some perspectives on the future research and development of the hollow structures as drug carriers.

Dual-stimuli-responsive porous polymer enzyme reactor for tuning enzymolysis efficiency

A strategy for preparing a dual-stimuli-responsive porous polymer membrane enzyme reactor (D-PPMER) is described, consisting of poly (styrene-maleic anhydride-N-isopropylacrylamide-acrylate-3',3'-dimethyl-6-nitro-spiro[2H-1-benzopyran-2,2'-indoline]-1'-esterspiropyran ester) [P(S-M-N-SP)] and D-amino acid oxidase. Tunable control via "on/off" 365 nm UV light irradiation and temperature variation was used to change the membrane surface configuration and adjust the enzymolysis efficiency of the D-PPMER. A chiral capillary electrophoresis technique was developed for evaluation of the enzymatic efficiency of D-PPMER with a Zn(II)-dipeptide complex as the chiral selector and D,L-serine as the substrate. Interestingly, the enzymatic kinetic reaction rate of D-PPMER under UV irradiation at 36 °C (9.2 × 10^-2 mM·min^-1) was 3.2-fold greater than that of the free enzyme (2.9 × 10^-2 mM·min^-1). This was because upon UV irradiation at high temperature, the P(SP) and P(N) moieties altered from a "stretched" to a "curled" state to encapsulate the enzyme in smaller cavities. The confinement effect of the cavities further improved the enzymatic efficiency of the D-PPMER. This protocol highlights the outstanding potential of smart polymers, enables tunable control over the kinetic rates of stimuli-responsive enzyme reactors, and establishes a platform for adjusting enzymolysis efficiency using two different stimuli.

Hierarchical colloidosomes self-assembled from block copolymer micelles via emulsion interfacial confinement

Hierarchical self-assembly of polymeric building blocks into high-level colloidosomes is desirable to not only design novel nanostructures but also fabricate the complex artificial materials across many length scales with multifunctionality. Although great progress has been made in the designing the hierarchical colloidosomes, the fabrication of polymeric colloidosomes self-assembled from block copolymer (BCP) colloidal nanoparticles still remains challenge. Here, we report the fabrication of the hierarchical polymeric colloidosomes with typical hollow internal structures self-assembled from the polystyrene-block-poly (2-vinyl pyridine) (PS-b-P2VP) BCP spherical micelles through the emulsion interfacial confinement, which is constructed through the water-in-1-butanol emulsion system. Moreover, the hierarchical colloidosomes can disassemble into the original uniform spherical micelles under the acid aqueous solution, indicating that the colloidosomes possess good pH stimuli-responsibility. Finally, the stability of the colloidosomes can be greatly improved by cross-linking the P2VP corona of original spherical micelles, offering the effective templates for construction of the multifunctional materials. This finding provides a simple yet effective method for the fabrication of the hierarchical colloidosomes from the BCP building blocks.

Preparation of dual-chamber microcapsule by Pickering emulsion for self-healing application with ultra-high healing efficiency

This work presented a new concept for designing dual-chamber self-healing microcapsules, which encapsulated both healing and curing species within a single microcapsule via Pickering emulsion photopolymerization. In our strategy, robust SiO₂ spheres encapsulating curing agent were firstly synthesized and used as Pickering emulsifiers to prepare emulsions loaded with self-healing agent and photo-curable monomer. Upon exposure to UV light, the photo-curable monomer underwent photo-crosslinking and converted into microcapsules wall. In the meanwhile, the SiO₂ spheres encapsulating curing agent were trapped in the microcapsule wall. The dual-chamber microcapsule which loaded the healing agent in its core and curing agent within its shell, was thus prepared. The presence of both the encapsulated healing and curing agent within a single capsule was demonstrated by infrared spectrometry and thermogravimetric analysis. Upon fracture, the healing agent and curing agent are released simultaneously from the dual-chamber microcapsule, which facilitates the interaction of the two agents, and enhances the healing efficiency. Up to 85% healing efficiency of the epoxy resin was achieved in 1 h, which was much higher than that of the traditional double microcapsules self-healing system (65%), demonstrating the excellent self-healing performance of the dual-chamber microcapsules. It has been demonstrated that the coating based on dual-chamber microcapsule presented reliable and outstanding self-healing anti-corrosion efficiency. By changing the species of healing agent, curing agent and wall substances (photo-curable monomer), the as-prepared dual-chamber microcapsules can meet different requirements of versatile self-healing system.

Interplay of distributions of multiple guest molecules in block copolymer micelles: A dissipative particle dynamics study

HYPOTHESIS

Delivery of multiple payloads using the same micelle is of significance to achieve multifunctional or synergistic effects. The interacting distribution of different payloads in micelles is expected to influence the loading stability and capacity. It is highly desirable to explore how intermolecular interactions affect the joint distribution of multi-payloads.

EXPERIMENTS

Dissipative Particle Dynamics simulations were performed to probe the loading of three payloads: decane with a linear carbon chain, butylbenzene with an aromatic ring connected to carbon chain, and naphthalene with double aromatic rings, within poly(β-amino ester)-b-poly(ethylene glycol) micelles. Properties of core-shell micelles, e.g., morphological evolution, radial density distribution, mean square displacement, and contact statistics, were analyzed to reveal payloads loading stability and capacity. Explorations were extended to vesicular, multi-compartment, double helix, and layer-by-layer micelles with more complex inner structures.

FINDINGS

Different payloads have their own preferred locations. Decane locates at the hydrophilic/hydrophobic interface, butylbenzene occupies both the hydrophilic/hydrophobic interface and the hydrophobic core, while naphthalene enters the hydrophobic core. More efficient delivery of multi-payloads is achieved since the competition of payloads occupying preferred locations is minimized. The fusion of micelles encapsulating different payloads suggests that specific payloads will move to their preferred positions without interfering other payloads.

Adapting and Remolding: Orchestrating Tumor Microenvironment Normalization with Photodynamic Therapy by Size Transformable Nanoframeworks

Abnormal tumor microenvironment (TME) facilitates tumor proliferation and metastasis and establishes physiological barriers for effective transport of therapeutics inside the tumor, posing great challenges for cancer treatment. We designed a core-satellite size transformable nanoframework (denoted as T-PFRT) that can synchronously adapt to and remold TME for augmenting photodynamic therapy to inhibit tumor growth and prevent tumor metastasis. Upon matrix metalloproteinase 2 (MMP2)-responsive dissociation of the nanoframework in TME, the core structure loaded with TGFβ signaling pathway inhibitor and oxygen-carrying hemoglobin aims to stroma remodeling and hypoxia relief, allowing photosensitizer-encapsulated satellite particles to penetrate to deep-seated tumor for oxygen-fueled photodynamic therapy. T-PFRT could overcome the stroma and hypoxia barriers for delivering therapeutics and gain excellent therapeutic outcomes in the treatment of primary and metastatic tumors.

Robust Damage-Reporting Strategy Enabled by Dual-Compartment Microcapsules

Dye-filled microcapsules are an attractive way to identify microscopic damage of materials by the naked eye. However, there are many disadvantages in traditional microcapsule-based self-reporting materials, such as a poor self-reporting effect. A new concept for the design of self-reporting microcapsules is presented here. Our work develops a novel kind of dual-compartmental microcapsule via Pickering emulsion photopolymerization, which can encapsulate two interacting species ("pro-dye" and "developer") separately in a single microcapsule. In our strategy, SiO₂ microspheres encapsulating polyetheramine (PEA, developer) were first prepared and employed as a Pickering emulsifier to stabilize oil-in-water emulsions, in which the oil phase consisted of 2',7'-dichlorofluorescein (DCF, pro-dye) and a monomer. After the monomer polymerization, a dual-compartment microcapsule, which encapsulated the pro-dye in the core and the developer in the shell, was obtained. Upon the rupture of the microcapsule, the pro-dye and the developer were released simultaneously and reacted to yield a pronounced chromogenic response. Compared with traditional double-microcapsule systems, this dual-compartment microcapsule system demonstrated a more efficient and pronounced self-reporting effect. This is the first time that a double-encapsulation scheme involving the compartmentalized release of two interacting species within a single microcapsule has been demonstrated for self-reporting, which overcomes the tough problems of the uneven distribution of the traditional double-microcapsule systems.

Dual Stimuli-Responsive Pickering Emulsions from Novel Magnetic Hydroxyapatite Nanoparticles and Their Characterization Using a Microfluidic Platform

Stimuli-responsive emulsifiers have emerged as a class of smart agents that can permit regulated stabilization and destabilization of emulsions, which is essential for food, cosmetic, pharmaceutical, and petroleum industries. Here, we report the synthesis of novel "smart" hydroxyapatite (HaP) magnetic nanoparticles and their corresponding stimuli-responsive Pickering emulsions and explore their movement under confined spaces using a microfluidic platform. Pickering emulsions prepared with our magnetic stearic acid-functionalized Fe₂O₃@HaP nanoparticles exhibited pronounced pH-responsive behavior. We observed that the diameter of emulsion droplets decreases with an increase in pH. Swift demulsification was achieved by lowering the pH, whereas the reformation of emulsions was achieved by increasing the pH; this emulsification-demulsification cycling was successful for at least ten cycles. We used a microfluidic platform to test the stability of the emulsions under flowing conditions and their response to a magnetic field. We observed that the emulsion stability was diminished and droplet coalescence was enhanced by the application of the magnetic field. The smart nanoparticles we developed and their HaP-based emulsions present promising materials for pharmaceutical and petroleum industries, where responsive emulsions with controlled stabilities are required.

Multi-Encapsulation Combination of O/W/O Emulsions with Polyurea Microcapsules for Controlled Release and Safe Application of Dimethyl Disulfide

Dimethyl disulfide (DMDS), a promising alternative fumigant, has been highly desirable for excellent management of soil pests and diseases. However, high volatility and moderate toxicity of this sulfide limit its application. To address these issues, a novel controlled release formulation of DMDS was proposed employing multiple emulsions and polyurea microcapsules (DMDS@MEs-MCs). The successful combination of the two technologies was revealed by confocal laser scanning microscopy, scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared. According to the multiple encapsulation structure, the encapsulation efficiency decreased by only 3.13% after thermal storage, compared with a 15.21% decrease of microcapsules made with only a monolayer film. DMDS@MEs-MCs could effectively control the release of active ingredient, which increased applicator and environmental safety during application. Moreover, it could be facilely used by spraying and drip irrigation instead of a special fumigation device. The innovative formulation exhibited better control efficacy on soil pathogens (Fusarium spp. and Phytophthora spp.) and root-knot nematodes (Meloidogyne spp.) than DMDS technical concentration (DMDS TC). In addition, it did not inhibit seed germination after 10 days when the plastic film was removed from the fumigated soil. This method appears to be of broad interest for the development of safe and handy fumigant application.

Preparation of pH-Responsive Dual-Compartmental Microcapsules via Pickering Emulsion and Their Application in Multifunctional Textiles

Currently, smart and functional textiles have attracted increasing attention for the research on their application in various fields. In this paper, perfluorooctyltriethoxysilane (FAS13)-loaded silica nanocapsules taken as the Pickering emulsifier was applied to stabilize O/W emulsion for obtaining pH-responsive dual-compartmental microcapsules which show a strawberry-like structure with jasmine essence as the core and pH-responsive polymers and silica nanocapsules as the shell. These microcapsules could endow it with multifunctions by functionalizing the fabric, while the preparation and functionalization process is effortless and environmental friendly. Not only does the treated fabric demonstrate the self-healing superhydrophobicity and ultraviolet (UV) resistance because of the hydrophobic FAS13 getting loaded into silica nanocapsules and the surface modification of UV absorbent, it is also capable of the pH control jasmine essence-releasing performance, which allows over 40% of the fragrance to be preserved for three months through the controlled release of jasmine essence from the microcapsules.

The thermal/pH-sensitive drug delivery system encapsulated by PAA based on hollow hybrid nanospheres with two silicon source

The synthesis of drug delivery systems based on hollow mesoporous silica nanoparticles (MSNs) is still a major challenge. In this work, the hollow hybrid MSNs were successfully prepared by cetyltrimethylammonium bromide-directed sol-gel process and one-step hydrothermal treatment process. The hollow hybrid MSNs had hybrid ethane-bridged frameworks with the uniform particle size (250 nm) and mesoporous pore diameter (3.7 nm). The polyacrylic acid (PAA) encapsulated drug delivery system based on hollow hybrid MSNs was prepared by using silanization, surface modification, doxorubicin hydrochloride (DOX) loading, and PAA coating. Drug encapsulation and release behavior at different temperatures and pH were studied by using DOX as a model guest molecule. The results displayed that the modified hollow ethane-bridged MSNs possessed good biocompatibility and excellent thermal/pH-dual-sensitive drug release property. This novel thermal/pH-sensitive drug delivery system based on hollow ethane-bridged MSNs has the advantages of feasible synthesis, no cytotoxicity, and good drug loading capacity, which may have potential applications in the anticancer therapy.

Visualization of materials using the confocal laser scanning microscopy technique

The development of materials science always benefits from advanced characterizations. Currently, imaging techniques are of great technological importance in both fundamental and applied research on materials. In comparison to conventional visualization methods, confocal laser scanning microscopy (CLSM) is non-invasive, with macroscale and high-contrast scanning, a simple and fast sample preparation procedure as well as easy operation. In addition, CLSM allows rapid acquisition of longitudinal and cross-sectional images at any position in a material. Therefore, the CLSM-based visualization technique could provide direct and model-independent insight into material characterizations. This review summarizes the recent applications of CLSM in materials science. The current CLSM approaches for the visualization of surface structures, internal structures, spatial structures and reaction processes are discussed in detail. Finally, we provide our thoughts and predictions on the future development of CLSM in materials science. The purpose of this review is to guide researchers to build a suitable CLSM approach for material characterizations, and to open viable opportunities and inspirations for the development of new strategies aiming at the preparation of advanced materials. We hope that this review will be useful for a wide range of research communities of materials science, chemistry, and engineering.

Synthesis of Temperature/pH Dual-Stimuli-Response Multicompartmental Microcapsules via Pickering Emulsion for Preprogrammable Payload Release

Stimuli-responsive microcapsules, which can release the encapsulated payload under various environmental stimuli, have attracted great interests of the food, pharmaceutical, cosmetics, and agricultural fields in recent years. However, most reported responsive microcapsules normally have a single storage area and thus load/release only one type of payload under one stimulus. In this work, we fabricated a novel kind of multicompartmental intelligent microcapsule with two storage areas and independently controlled (preprogrammable) releasing behavior under different stimuli via rapid photopolymerization of Pickering emulsions. In our strategy, a temperature-sensitive polymeric (N-isopropyl acrylamide, pNIPAM) particle was prepared and loaded with Nile Red (NR), which was then employed as a Pickering emulsifier to stabilize oil-in-water droplets. The oil was composed of pH-responsive monomers and oil-soluble fluorescent green (OG). Upon exposure to photoirradiation, pH-responsive monomers were polymerized along the interior of the droplets and converted into microcapsules. With NR in the temperature-sensitive pNIPAM@NR particles and OG in the interior of the microcapsules, the as-prepared microcapsules possess dual-carrier capability with two payloads encapsulated dependently in two different compartments. In addition, the microcapsules could respond to two different external stimuli (temperature and pH) and realize the selective and independent release of encapsulated molecules (NR and OG) from the shell and core without any mutual interference. More importantly, the release of NR and OG can be programmed by preprogramming the order of the stimulus responses, which can be altered. Our work develops a simple and effective strategy to fabricate responsive multicompartment microcapsules with preprogrammable release of different molecules.

Tailor-made legumain/pH dual-responsive doxorubicin prodrug-embedded nanoparticles for efficient anticancer drug delivery and in situ monitoring of drug release

Legumain enzyme is a well-conserved lysosomal cysteine protease and is over-expressed in many tumor cells and tumor stromal cells and exhibits higher protease activity under acidic conditions, such as in lysosomes and endosomes. Legumain enzyme-triggered drug delivery systems have demonstrated potential therapeutic values in cancer targeted therapy. To realize a more efficient delivery of anticancer therapeutic agents, we herein report a legumain/pH dual-responsive drug delivery system for enhancing site-specific controlled release of antitumor drugs. The carrier (named "DS-NA") is a hybrid vector constituting PEG-b-PBLA polymers, pH-responsive OAPI polymers, and legumain-sensitive peptide-doxorubicin prodrug decorated fluorescent carbon dots (CDs-C9-AANL-DOX). In tumor cells, DS-NA could disassemble rapidly in acidic environments, and then release doxorubicin through legumain digestion. Except as a drug vector, the drug release process from DS-NA could also be dynamically monitored by CLSM as the DOX was released from the surface of CDs through the AANL peptide linker digested by legumain, then transferred into the cell nucleus and exerted cytotoxicity, while the CDs themselves remained in the cytoplasm. As a control, the CDs-C9-DOX, which did not contain the AANL peptide linker, also still resided in the cytoplasm. Furthermore, in vivo studies show that DS-NA had a stronger inhibitory effect on tumor tissue with attenuated side effects to normal tissues than control nanoparticles or free drugs, which may be due to comprehensive effects including pH/legumain dual-triggered drug release, long blood circulation periods, and EPR effects. Together, a combination strategy of acid sensitivity and legumain enzyme sensitivity used for site-specific controlled release of drugs provides a novel method for enhanced and precise antitumor chemotherapy.

Acid-cleavable polymers for simultaneous fast and slow release of functional molecules

Hydrophobic copolymers are designed to respond to acid stimuli for both simultaneous rapid and sustained release of multiple cargos.

Antibacterial and anticancer activities of asymmetric lollipop-like mesoporous silica nanoparticles loaded with curcumin and gentamicin sulfate

Asymmetric mesoporous silica nanoparticles with anisotropic geometry and dual-compartments are highly desired for loading and release of dual-drugs in separated storage spaces. In this study, an asymmetric lollipop-like mesoporous silica nanoparticle Fe₃O₄@SiO₂&EPMO (EPMO = ethane bridged periodic mesoporous organosilica) was successfully developed via an anisotropic epitaxial growth strategy. The asymmetric nanoparticles show a uniform lollipop shape with a head of spherical Fe₃O₄@SiO₂ core-shell that is 200 nm in diameter and a tail of EPMO nanorods with a length of ∼90 nm, and a specific surface area of ∼650.3 m² g^-1. Most importantly, the asymmetric nanoparticles possess the unique dual independent (hydrophilic/hydrophobic) spaces with good loading capacities and are significantly more efficient for cancer cell killing than pure drug based on in vitro studies. Additionally, the dual-drug-loaded nanoparticles exhibited excellent antibacterial activity.

The Horizon of the Emulsion Particulate Strategy: Engineering Hollow Particles for Biomedical Applications

With their hierarchical structures and the substantial surface areas, hollow particles have gained immense research interest in biomedical applications. For scalable fabrications, emulsion-based approaches have emerged as facile and versatile strategies. Here, the recent achievements in this field are unfolded via an "emulsion particulate strategy," which addresses the inherent relationship between the process control and the bioactive structures. As such, the interior architectures are manipulated by harnessing the intermediate state during the emulsion revolution (intrinsic strategy), whereas the external structures are dictated by tailoring the building blocks and solidification procedures of the Pickering emulsion (extrinsic strategy). Through integration of the intrinsic and extrinsic emulsion particulate strategy, multifunctional hollow particles demonstrate marked momentum for label-free multiplex detections, stimuli-responsive therapies, and stem cell therapies.

Eu2+/Eu3+-Based Smart Duplicate Responsive Stimuli and Time-gated Nanohybrid for Optical Recording and Encryption

With the rapid development of information science, it is urgent that memory devices possessing high security, density, and desirable storage ability should be developed. In this work, a smart duplicate response of stimuli has been developed and a time-gate nanohybrid based on variable valence Eu²⁺/Eu³⁺ coencapsulated has been fabricated and acts as active material in the multilevel and multidimensional memory devices. The luminescence lifetime of Eu³⁺ in this nanohybrid gave a stimuli response due to which the energy level of the coordinated ligand could be modulated. Furthermore, by a simple sintering procedure, Eu³⁺ was partially in situ reduced to Eu²⁺ with a short lifetime in the system. And the in situ reduction ensured both Eu³⁺ and Eu²⁺ ions' uniform distribution in the nanohybrid and simultaneous response upon light excitation of variable valence Eu ions. Interestingly, Eu³⁺ revealed a prolonged lifetime because of the presence of an energy-transfer effect of Eu²⁺ → Eu³⁺. Such a nanohybrid had abundant luminescent properties, including the short lifetime of Eu²⁺, the energy transfer from the Eu²⁺ to Eu³⁺ ions, and the stimuli response of the Eu³⁺ lifetimes when exposed to acidic or basic vapor, thus giving birth to interesting recording and encryption performance in spatial-temporal dimensions. We believe that this research will point out a new direction for the future development of multilevel and multidimensional optical recording and encryption materials.

Recent Advances in Targeted Tumor Chemotherapy Based on Smart Nanomedicines

Efficacy and safety of chemotherapeutic drugs constitute two major criteria in tumor chemotherapy. Nanomedicines with tumor-targeted properties hold great promise for improving the efficacy and safety. To design targeted nanomedicines, the pathological characteristics of tumors are extensively and deeply excavated. Here, the rationale, principles, and advantages of exploiting these pathological characteristics to develop targeted nanoplatforms for tumor chemotherapy are discussed. Homotypic targeting with the ability of self-recognition to source tumors is reviewed individually. In the meanwhile, the limitations and perspective of these targeted nanomedicines are also discussed.

Trojan-Horse-Like Stimuli-Responsive Microcapsules

Multicompartment microcapsules, with each compartment protected by a distinct stimuli-responsive shell for versatile controlled release, are highly desired for developing new-generation microcarriers. Although many multicompartmental microcapsules have been created, most cannot combine different release styles to achieve flexible programmed sequential release. Here, one-step template synthesis of controllable Trojan-horse-like stimuli-responsive microcapsules is reported with capsule-in-capsule structures from microfluidic quadruple emulsions for diverse programmed sequential release. The nested inner and outer capsule compartments can separately encapsulate different contents, while their two stimuli-responsive hydrogel shells can individually control the content release from each capsule compartment for versatile sequential release. This is demonstrated by using three types of Trojan-horse-like stimuli-responsive microcapsules, with different combinations of release styles for flexible programmed sequential release. The proposed microcapsules provide novel advanced candidates for developing new-generation microcarriers for diverse, efficient applications.

One-step Preparation of Monodisperse Multifunctional Macroporous Particles through a Spontaneous Physical Process

Macroporous particles that combine the property features of spherical structures and porous materials are expected to find use over micro- and macroscopic length scales from miniaturized systems such as cell imaging, drug and gene delivery to industrial applications. However, the capacity for de novo design of such materials is still limited. Here, a spontaneous process to fabricate monodisperse multifunctional macroporous particles (MMMPs) by high internal phase emulsion templating is reported. An interesting physical phenomenon involving self-emulsification and synergistic effects between nanoparticles and amphiphilic diblock copolymers is observed in this process. These MMMPs, featured with tailor-made pore structures, pH responsiveness, and magnetic response, could be used as stimuli-responsive carriers for multiple functional molecules with a high loading and releasing efficiency. This new understanding regarding the underlying phenomena that control self-emulsification behavior and synergistic action in emulsion systems provides a unique outlook and a novel approach to the design of potentially multifunctional porous materials for controllable release and delivery processes.

Simultaneous Microscopic Structure Characteristics of Shape-Memory Effects of Thermo-Responsive Poly(vinylidene fluoride-co-hexafluoropropylene) Inverse Opals

This paper presents a simultaneous microscopic structure characteristic of shape-memory (SM) poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) inverse opals together with a bulk PVDF-HFP by scanning electron microscopy (SEM). The materials show a thermo-sensitive micro-SM property, accompanied with a reversible and modulated optical property. The introduction of the inverse opal structure into the shape-memory polymer material renders a recognition ability of the microstructure change aroused from complex environmental signals by an optical signal, which can be simultaneously detected by SEM. Furthermore, this feature was applied as a reversible write/erase of fingerprint pattern through the press-stimulus and solvent-induced effect, together with the changes of morphology/optical signal. This micro-SM property can be attributed to the shrink/swell effect of the polymer chain from external stimuli combined with the microscopic structure of inverse opals. It will trigger a promising way toward designing reversible micro-deformed actuators.

Nanocolloidosomes with Selective Drug Release for Active Tumor-Targeted Imaging-Guided Photothermal/Chemo Combination Therapy

Selective drug release is highly desirable for photothermal/chemo combination therapy when two or even more theranostic agents are encapsulated together within the same nanocarrier. A conventional nanocarrier can hardly achieve this goal. Herein, doxorubicin and indocyanine green (DOX/ICG)-loaded nanocolloidosomes (NCs), with selective drug release, were fabricated as a novel multifunctional theranostic nanoplatform for photothermal/chemo combination therapy. Templating from galactose-functionalized hydroxyethyl starch-polycaprolactone (Gal-HES-PCL) nanoparticles-stabilized Pickering emulsions, the resultant DOX/ICG@Gal-HES-PCL NCs had a diameter of around 140 nm and showed an outstanding tumor-targeting ability, preferable tumor penetration capability, and promotion of photothermal effect. Moreover, these NCs can be used for NIR fluorescence imaging and thus render real-time imaging of solid tumors with high contrast. Collectively, such NCs achieved the best in vivo antitumor efficacy combined with laser irradiation compared with DOX/ICG@HES-PCL NCs and DOX/ICG mixture. These NCs are valuable for active tumor-targeted imaging-guided combination therapy against liver cancer and potentially other diseases.

Polydopamine Based Colloidal Materials: Synthesis and Applications

Polydopamine is a synthetic analogue of natural melanin (eumelanin) produced from oxidative polymerization of dopamine. Owing to its strong adhesion ability, versatile chemical reactivity, biocompatibility and biodegradation, polydopamine is commonly applied as a versatile linker to synthesize colloidal materials with diverse structures, unique physicochemical properties and tunable functions, which allow for a broad scope of applications including biomedicine, sensing, catalysis, environment and energy. In this personal account, we discuss first about the different synthetic approaches of polydopamine, as well as its polymerization mechanism, and then with a comprehensive overview of recent progress in the synthesis and applications of polydopamine-based colloidal materials. Finally, we summarize this personal account with future perspectives.