Photocatalysis with Quantum Dots and Visible Light: Selective and Efficient Oxidation of Alcohols to Carbonyl Compounds through a Radical Relay Process in Water

CdS Quantum Dot Gels as a Direct Hydrogen Atom Transfer Photocatalyst for C-H Activation

Here, we report CdS quantum dot (QD) gels, a three-dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d-HAT) photocatalyst for C-H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α-amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C-H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C-H bonds are activated by the photoexcited CdS QD gel via a d-HAT mechanism. This d-HAT mechanism is supported by the linear correlation between the logarithm of the C-H bond activation rate constant and the C-H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C-H activation.

Photorefinery of Biomass and Plastics to Renewable Chemicals using Heterogeneous Catalysts

The photocatalytic conversion of biomass and plastic waste provides opportunities for sustainable fuel and chemical production. Heterogeneous photocatalysts, typically composed of semiconductors with distinctive redox properties in their conduction band (CB) and valence band (VB), facilitate both the oxidative and reductive valorization of organic feedstocks. This article provides a comprehensive overview of recent advancements in the photorefinery of biomass and plastics from the perspective of the redox properties of photocatalysts. We explore the roles of the VB and CB in enhancing the value-added conversion of biomass and plastics via various pathways. Our aim is to bridge the gap between photocatalytic mechanisms and renewable carbon feedstock valorization, inspiring further development in photocatalytic refinery of biomass and plastics.

Recent Advances and Insights in Designing ZnxCd1-xS-Based Photocatalysts for Hydrogen Production and Synergistic Selective Oxidation to Value-Added Chemical Production

Combining the hydrogen (H2) extraction process and organic oxidation synthesis in photooxidation-reduction reactions mediated by semiconductors is a desirable strategy because rich chemicals are evolved as byproducts along with hydrogen in trifling conditions upon irradiation, which is the only effort. The bifunctional photocatalytic strategy facilitates the feasible formation of a C═O/C─C bond from a large number of compounds containing a X-H (X = C, O) bond; therefore, the production of H2 can be easily realized without support from third agents like chemical substances, thus providing an eco-friendly and appealing organic synthesis strategy. Among the widely studied semiconductor nanomaterials, ZnxCd1-xS has been continuously studied and explored by researchers over the years, and it has attracted much consideration owing to its unique advantages such as adjustable band edge position, rich elemental composition, excellent photoelectric properties, and ability to respond to visible light. Therefore, nanostructures based on ZnxCd1-xS have been widely studied as a feasible way to efficiently prepare hydrogen energy and selectively oxidize it into high-value fine chemicals. In this Review, first, the crystal and energy band structures of ZnxCd1-xS, the model of twin nanocrystals, the photogenerated charge separation mechanism of the ZB-WZ-ZB homojunction with crisscross bands, and the Volmer-Weber growth mechanism of ZnxCd1-xS are described. Second, the morphology, structure, modification, synthesis, and vacancy engineering of ZnxCd1-xS are surveyed, summarized, and discussed. Then, the research progress in ZnxCd1-xS-based photocatalysis in photocatalytic hydrogen extraction (PHE) technology, the mechanism of PHE, organic substance (benzyl alcohol, methanol, etc.) dehydrogenation, the factors affecting the efficiency of photocatalytic discerning oxidation of organic derivatives, and selective C-H activation and C-C coupling for synergistic efficient dehydrogenation of photocatalysts are described. Conclusively, the challenges in the applicability of ZnxCd1-xS-based photocatalysts are addressed for further research development along this line.

Constrution of Quinazoline-Linked Covalent Organic Frameworks via a Multicomponent Reaction for Photocatalysis

Quinazoline (Qz)-linked covalent organic frameworks (COFs) have been constructed via a three-component reaction of ortho-acylanilines, benzaldehydes and NH4OAc. The structure of Qz-COFs has been confirmed by solid-state nuclear magnetic resonance spectroscopy, Fourier transform infrared and powder X-ray diffraction patterns. The Qz-COFs possess high chemical stability, showing good endurance to strong acid, strong base, oxidant, reductant and other conditions. Particularly, Qz-COF-3 can catalyze the aerobic photooxidation of toluene and other compounds containing C(sp3)-H bonds.

Concurrent Ammonia Synthesis and Alcohol Oxidation Boosted by Glutathione-Capped Quantum Dots under Visible Light

Mother nature accomplishes efficient ammonia synthesis via cascade N2 oxidation by lightning strikes followed with enzyme-catalyzed nitrogen oxyanion (NOx -, x = 2,3) reduction. The protein environment of enzymatic centers for NOx --to-NH4 + process greatly inspires the design of glutathione-capped (GSH) quantum dots (QDs) for ammonia synthesis under visible light (440 nm) in tandem with plasma-enabled N2 oxidation. Mechanistic studies reveal that GSH induces positive shift of surface charge to strengthen the interaction between NOx - and QDs. Upon visible light irradiation of QDs, the balanced and rapid hole and electron transfer furnish GS·radicals for 2e-/2H+ alcohol oxidation and H·for 8e-/10H+ NO3 --to-NH4 + reduction simultaneously. For the first time, mmol-scale ammonia synthesis is realized with apparent quantum yields of 5.45% ± 0.64%, and gram-scale synthesis of value-added acetophenone and NH4Cl proceeds with 1:4 stoichiometry and stability, demonstrating promising multielectron and multiproton ammonia synthesis efficiency and sustainability with nature-inspired artificial photocatalysts.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Mid-IR Light-Activatable Full Spectrum LaB6 Plasmonic Photocatalyst

Photocatalysts as long-lasting, benign reagents for disinfection of bacteria in hospitals and public areas/facilities/transportation vehicles are strongly needed. A common limitation for all existing semiconductor photocatalysts is the requirement of activation by external UV-vis-near-infrared (NIR) light with wavelengths shorter than ≈1265 nm. None of the existing photocatalysts can function during nighttime in the absence of external light. Herein, an unprecedented LaB6 plasmonic photocatalyst is reported, which can absorb UV-vis-NIR light and mid-IR (3900 nm) light to split water and generate hydrogen and hydroxyl radicals for the decomposition of organic pollutants, as well as kill multidrug-resistant Escherichia coli bacteria. Mid-IR light (≈2-50 µm) is readily available from the natural environments via thermal radiation of warm/hot objects on the earth including human bodies, animals, furnances, hot/warm electrical devices, and buildings.

Cobaloxime-Integrated Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution Coupled with Alcohol Oxidation

We report an azide-functionalized cobaloxime proton-reduction catalyst covalently tethered into the Wurster-type covalent organic frameworks (COFs). The cobaloxime-modified COF photocatalysts exhibit enhanced photocatalytic activity for hydrogen evolution reaction (HER) in alcohol-containing solution with no presence of a typical sacrificial agent. The best performing cobaloxime-modified COF hybrid catalyzes hydrogen production with an average HER rate up to 38 μmol h-1 in ethanol/phosphate buffer solution under 4 h illumination. Ultrafast transient optical spectroscopy characterizations and charge carrier analysis reveal that the alcohol contents functioning as hole scavengers could be oxidized by the photogenerated holes of COFs to form aldehydes and protons. The consumption of the photogenerated holes thus suppresses exciton recombination of COFs and improves the ratio of free electrons that were effectively utilized to drive catalytic reaction for HER. This work demonstrates a great potential of COF-catalyzed HER using alcohol solvents as hole scavengers and provides an example toward realizing the accessibility to the scope of reaction conditions and a greener route for energy conversion.

Versatile synthesis of nano-icosapods via cation exchange for effective photocatalytic conversion of biomass-relevant alcohols

Branched metal chalcogenide nanostructures with well-defined composition and configuration are appealing photocatalysts for solar-driven organic transformations. However, precise design and controlled synthesis of such nanostructures still remain a great challenge. Herein, we report the construction of a variety of highly symmetrical metal sulfides and heterostructured icosapods based on them, in which twenty branches were radially grown in spatially ordered arrangement, with a high degree of structure homogeneity. Impressively, the as-obtained CdS-PdxS icosapods manifest a significantly improved photocatalytic activity for the selective oxidation of biomass-relevant alcohols into corresponding aldehydes coupled with H2 evolution under visible-light irradiation (>420 nm), and the apparent quantum yield of the benzyl alcohol reforming can be achieved as high as 31.4% at 420 nm. The photoreforming process over the CdS-PdxS icosapods is found to be directly triggered by the photogenerated electrons and holes without participation of radicals. The enhanced photocatalytic performance is attributed to the fast charge separation and abundant active sites originating from the well-defined configuration and spatial organization of the components in the branched heterostructures.

Photochemical Hydrogen Atom Transfer Catalysis for Dehydrogenation of Alcohols To Form Carbonyls

Controllable oxidation of alcohols to carbonyls is one of the fundamental transformations in organic chemistry. Herein, we report an unprecedented visible-light-mediated metal-free oxidation of alcohols to carbonyls with hydrogen evolution. By synergistic combination of organophotocatalyst 4CzIPN and a thiol hydrogen atom transfer catalyst, a broad range of alcohols, including primary and secondary benzylic alcohols as well as aliphatic alcohols, were readily oxidized to carbonyls in moderate to excellent yields. A site-selective oxidation has also been achieved by this protocol. Mechanistic investigation indicates that the oxidation proceeds through an oxidative radical-polar crossover process to obtain an α-oxy carbon cation.

Effect of a redox-mediating ligand shell on photocatalysis by CdS quantum dots

Semiconductor quantum dots (QDs) are efficient organic photoredox catalysts due to their high extinction coefficients and easily tunable band edge potentials. Despite the majority of the surface being covered by ligands, our understanding of the effect of the ligand shell on organic photocatalysis is limited to steric effects. We hypothesize that we can increase the activity of QD photocatalysts by designing a ligand shell with targeted electronic properties, namely, redox-mediating ligands. Herein, we functionalize our QDs with hole-mediating ferrocene (Fc) derivative ligands and perform a reaction where the slow step is hole transfer from QD to substrate. Surprisingly, we find that a hole-shuttling Fc inhibits catalysis, but confers much greater stability to the catalyst by preventing a build-up of destructive holes. We also find that dynamically bound Fc ligands can promote catalysis by surface exchange and creation of a more permeable ligand shell. Finally, we find that trapping the electron on a ligand dramatically increases the rate of reaction. These results have major implications for understanding the rate-limiting processes for charge transfer from QDs and the role of the ligand shell in modulating it.

Selective oxidation of benzylic alcohols via synergistic bisphosphonium and cobalt catalysis

A synergistic photocatalytic system using a bisphosphonium catalyst and a cobalt catalyst has been developed, enabling the selective oxidation of benzylic alcohols under oxidant-free and environmentally benign conditions. High efficiencies have been obtained for a variety of alcohol substrates, and exclusive selectivity for aldehyde products has been achieved across the board. Furthermore, this photocatalytic system proved to be efficient when performed under continuous-flow conditions, even using a simple and easily assembled continuous-flow setup.

Organo-photocatalytic C-H bond oxidation: an operationally simple and scalable method to prepare ketones with ambient air

Oxidative C-H functionalization with O₂ is a sustainable strategy to convert feedstock-like chemicals into valuable products. Nevertheless, eco-friendly O₂-utilizing chemical processes, which are scalable yet operationally simple, are challenging to develop. Here, we report our efforts, via organo-photocatalysis, in devising such protocols for catalytic C-H bond oxidation of alcohols and alkylbenzenes to ketones using ambient air as the oxidant. The protocols employed tetrabutylammonium anthraquinone-2-sulfonate as the organic photocatalyst which is readily available from a scalable ion exchange of inexpensive salts and is easy to separate from neutral organic products. Cobalt(ii) acetylacetonate was found to be greatly instrumental to oxidation of alcohols and therefore was included as an additive in evaluating the alcohol scope. The protocols employed a nontoxic solvent, could accommodate a variety of functional groups, and were readily scaled to 500 mmol scale in a simple batch setting using round-bottom flasks and ambient air. A preliminary mechanistic study of C-H bond oxidation of alcohols supported the validity of one possible mechanistic pathway, nested in a more complex network of potential pathways, in which the anthraquinone form - the oxidized form - of the photocatalyst activates alcohols and the anthrahydroquinone form - the relevant reduced form of the photocatalyst - activates O₂. A detailed mechanism, which reflected such a pathway and was consistent with previously accepted mechanisms, was proposed to account for formation of ketones from aerobic C-H bond oxidation of both alcohols and alkylbenzenes.

Direct Excitation of Aldehyde to Activate the C(sp2 )-H Bond by Cobaloxime Catalysis toward Fluorenones Synthesis with Hydrogen Evolution

A new way to form fluorenones via the direct excitation of substrates instead of photocatalyst to activate the C(sp² )-H bond under redox-neutral condition is reported. Our design relies on the photoexcited aromatic aldehyde intermediates that can be intercepted by cobaloxime catalyst through single electron transfer for following β-H elimination. The generation of acyl radical and successful interception by a metal catalyst cobaloxime avoid the use of a photocatalyst and stoichiometric external oxidants, affording a series of highly substituted fluorenones, including six-membered ketones, such as xanthone and thioxanthone derivatives in good to excellent yields, and with hydrogen as the only byproduct. This catalytic system features a readily available metal catalyst, mild reaction conditions and broad substrate scope, in which sunlight reaction and scale-up experiments by continuous-flow approach make the new methodology sustainable and amenable for potentially operational procedures.

Direct 1,2-Dicarbonylation of Alkenes towards 1,4-Diketones via Photocatalysis

1,4-Dicarbonyl compounds are intriguing motifs and versatile precursors in numerous pharmaceutical molecules and bioactive natural compounds. Direct incorporation of two carbonyl groups into a double bond at both ends is straightforward, but also challenging. Represented herein is the first example of 1,2-dicarbonylation of alkenes by photocatalysis. Key to success is that N(n-Bu)₄ ⁺ not only associates with the alkyl anion to avoid protonation, but also activates the α-keto acid to undergo electrophilic addition. The α-keto acid is employed both for acyl generation and electrophilic addition. By tuning the reductive and electrophilic ability of the acyl precursor, unsymmetric 1,4-dicarbonylation is achieved for the first time. This metal-free, redox-neutral and regioselective 1,2-dicarbonylation of alkenes is executed by a photocatalyst for versatile substrates under extremely mild conditions and shows great potential in biomolecular and drug molecular derivatization.

Visible-Light-Driven Oxidative Cleavage of Alkenes Using Water-Soluble CdSe Quantum Dots

The oxidative cleavage of C=C bonds is an important chemical reaction, which is a popular reaction in the photocatalytic field. However, high catalyst-loading and low turnover number (TON) are general shortcomings in reported visible-light-driven reactions. Herein, the direct oxidative cleavage of C=C bonds through water-soluble CdSe quantum dots (QDs) is described under visible-light irradiation at room temperature with high TON (up to 3.7×10⁴ ). Under the same conditions, water-soluble CdSe QDs could also oxidize sulfides to sulfoxides with 51-84 % yields and TONs up to 3.4×10⁴ . The key features of this photocatalytic protocol include high TONs, wide substrates scope, low catalyst loadings, simple and mild reaction conditions, and molecular O₂ as the oxidant.

Photocatalytic H2 Evolution Coupled with Furfuralcohol Oxidation over Pt-Modified ZnCdS Solid Solution

Coupling photocatalytic H₂ production with organic synthesis attracts immense interest in the energy and chemical engineering field for the low-cost, clean, and sustainable generation of green energy and value-added products. Nevertheless, the performance of current photocatalysts is greatly limited by grievous charge recombination and tardy H₂ evolution. To tackle these issues, a Pt nanocluster-modified ZnCdS solid solution is fabricated for photocatalytic H₂ production and selective furfuralcohol oxidation. The internal electric field inside the ZnCdS and Schottky junction between ZnCdS and Pt nanoclusters drastically ameliorate charge separation. Meanwhile, the Pt nanoclusters remarkably expedite the H₂ evolution kinetics on ZnCdS. As a result, the H₂ production rate over Pt-loaded ZnCdS reaches 1045 µmol g^-1 h^-1 , which is about 26- and 70-fold that of CdS and ZnS, respectively. Under light irradiation for 3 h, the conversion of furfuralcohol to furfural reaches 71% with 89% furfural selectivity. The photocatalytic mechanism is investigated by in situ characterizations and theoretical calculations.

Visible-Light-Driven Dehydrogenative Coupling of Primary Alcohols with Phenols Forming Aryl Carboxylates

A preparative method for obtaining aryl esters from aliphatic primary alcohols and phenols was developed. The reaction proceeds under the irradiation of visible light at ambient temperature, dispensing with any oxidant or hydrogen acceptor. Primary alcohols having a variety of functional groups are successfully esterified with phenols. The produced esters can be utilized as the precursor of various carbonyl compounds.

Direct, Site-Selective and Redox-Neutral α-C-H Bond Functionalization of Tetrahydrofurans via Quantum Dots Photocatalysis

As one of the most ubiquitous bulk reagents available, the intrinsic chemical inertness of tetrahydrofuran (THF) makes direct and site-selective C(sp³ )-H bond activation difficult, especially under redox neutral condition. Here, we demonstrate that semiconductor quantum dots (QDs) can activate α-C-H bond of THF via forming QDs/THF conjugates. Under visible light irradiation, the resultant alkoxyalkyl radical directly engages in radical cross-coupling with α-amino radical from amino C-H bonds or radical addition with alkene or phenylacetylene, respectively. In contrast to stoichiometric oxidant or hydrogen atom transfer reagents required in previous studies, the scalable benchtop approach can execute α-C-H bond activation of THF only by a QD photocatalyst under redox-neutral condition, thus providing a broad of value added chemicals starting from bulk THFs reagent.

Cooperative Coupling of Oxidative Organic Synthesis and Hydrogen Production over Semiconductor-Based Photocatalysts

Merging hydrogen (H₂) evolution with oxidative organic synthesis in a semiconductor-mediated photoredox reaction is extremely attractive because the clean H₂ fuel and high-value chemicals can be coproduced under mild conditions using light as the sole energy input. Following this dual-functional photocatalytic strategy, a dreamlike reaction pathway for constructing C-C/C-X (X = C, N, O, S) bonds from abundant and readily available X-H bond-containing compounds with concomitant release of H₂ can be readily fulfilled without the need of external chemical reagents, thus offering a green and fascinating organic synthetic strategy. In this review, we begin by presenting a concise overview on the general background of traditional photocatalytic H₂ production and then focus on the fundamental principles of cooperative photoredox coupling of selective organic synthesis and H₂ production by simultaneous utilization of photoexcited electrons and holes over semiconductor-based catalysts to meet the economic and sustainability goal. Thereafter, we put dedicated emphasis on recent key progress of cooperative photoredox coupling of H₂ production and various selective organic transformations, including selective alcohol oxidation, selective methane conversion, amines oxidative coupling, oxidative cross-coupling, cyclic alkanes dehydrogenation, reforming of lignocellulosic biomass, and so on. Finally, the remaining challenges and future perspectives in this flourishing area have been critically discussed. It is anticipated that this review will provide enlightening guidance on the rational design of such dual-functional photoredox reaction system, thereby stimulating the development of economical and environmentally benign solar fuel generation and organic synthesis of value-added fine chemicals.

Quantum Dot Photocatalysts for Organic Transformations

Quantum dots (QDs) with tunable photo-optical properties and colloidal nature are ideal for a wide range of photocatalytic reactions. In particular, QD photocatalysts for organic transformations can provide new and effective synthetic routes to high value-added molecules under mild conditions. In this Perspective, we discuss the advances of employing QDs for visible-light-driven organic transformations categorized into net reductive reactions, net oxidative reactions, and redox neutral reactions. We then provide our outlook for potential future directions in the field: nanostructure engineering to improve charge separation efficiencies, ligand shell engineering to optimize overall catalyst performance, in situ comprehensive studies to delineate underlying reaction mechanisms, and laboratory automation with the assistance of modern computing techniques to revolutionize the reaction optimization process.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

We have developed a cerium-photocatalyzed aerobic oxidation of primary and secondary benzylic alcohols to aldehydes and ketones using inexpensive CeCl₃·7H₂O as photocatalyst and air oxygen as the terminal oxidant.

Enhancing the efficiency of semiconducting quantum dot photocatalyzed atom transfer radical polymerization by ligand shell engineering

Manipulating the ligand shell of semiconducting quantum dots (QDs) has proven to be a promising strategy to enhance their photocatalytic performance for small molecule transformations, such as H₂ evolution and CO₂ reduction. However, ligand-controlled catalysis for macromolecules, which differ from small molecules in penetrability and charge transfer behavior due to their bulky sizes, still remains undiscovered. Here, we systematically investigate the role of surface ligands in the photocatalytic performance of cadmium selenide (CdSe) QDs in light-induced atom transfer radical polymerization (ATRP) by using thiol-based ligands with various polarities and chain lengths. A highly enhanced polymerization efficiency was observed when 3-mercapto propionic acid (MPA), a short-chain and polar ligand, was used to modify the CdSe QDs' surface, achieving high chain-end fidelity, good temporal control, and a dispersity of 1.18, while also tolerating a wide-range of functional monomers ranging from acrylates to methacrylates and fluorinated monomers. Transient absorption spectroscopy and time-resolved photoluminescence studies reveal interesting mechanistic details of electron and hole transfers from the excited QDs to the initiators and 3-MPA capping ligands, respectively, providing key mechanistic insight of these ligand controlled and QD photocatalyzed ATRP processes. The thiolate ligands were found to serve as an efficient hole acceptor for QDs, which facilitates the formation of a charge-separated state, followed by electron transfer from the conduction band edge to initiators and ultimately suppressing charge recombination within the QD.

Direct Allylic C(sp3 )-H and Vinylic C(sp2 )-H Thiolation with Hydrogen Evolution by Quantum Dots and Visible Light

Direct allylic C-H thiolation is straightforward for allylic C(sp³ )-S bond formation. However, strong interactions between thiol and transition metal catalysts lead to deactivation of the catalytic cycle or oxidation of sulfur atom under oxidative condition. Thus, direct allylic C(sp³ )-H thiolation has proved difficult. Represented herein is an exceptional for direct, efficient, atom- and step-economic thiolation of allylic C(sp³ )-H and thiol S-H under visible light irradiation. Radical trapping experiments and electron paramagnetic resonance (EPR) spectroscopy identified the allylic radical and thiyl radical generated on the surface of photocatalyst quantum dots (QDs). The C-S bond formation does not require external oxidants and radical initiators, and hydrogen (H₂ ) is produced as byproduct. When vinylic C(sp² )-H was used instead of allylic C(sp³ )-H bond, the radical-radical cross-coupling of C(sp² )-H and S-H was achieved with liberation of H₂ . Such a unique transformation opens up a door toward direct C-H and S-H coupling for valuable organosulfur chemistry.

Advances in Homogeneous Photocatalytic Organic Synthesis with Colloidal Quantum Dots

Colloidal semiconductor quantum dots (QDs) have been proven to be excellent photocatalysts due to their high photostability, large extinction coefficients, and tunable optoelectrical properties, and have attracted extensive attention by synthetic chemists. These excellent properties demonstrate its promise in the field of photocatalysis. In this review, we summarize the recent application of QDs as homogeneous catalysts in various photocatalytic organic reactions. These meaningful works in organic transformations show the unique catalytic activity of quantum dots, which are different from other semiconductors.

Visible Light Induced Reduction and Pinacol Coupling of Aldehydes and Ketones Catalyzed by Core/Shell Quantum Dots

We present an efficient and versatile visible light-driven methodology to transform aryl aldehydes and ketones chemoselectively either to alcohols or to pinacol products with CdSe/CdS core/shell quantum dots as photocatalysts. Thiophenols were used as proton and hydrogen atom donors and as hole traps for the excited quantum dots (QDs) in these reactions. The two products can be switched from one to the other simply by changing the amount of thiophenol in the reaction system. The core/shell QD catalysts are highly efficient with a turn over number (TON) larger than 4 × 10⁴ and 4 × 10⁵ for the reduction to alcohol and pinacol formation, respectively, and are very stable so that they can be recycled for at least 10 times in the reactions without significant loss of catalytic activity. The additional advantages of this method include good functional group tolerance, mild reaction conditions, the allowance of selectively reducing aldehydes in the presence of ketones, and easiness for large scale reactions. Reaction mechanisms were studied by quenching experiments and a radical capture experiment, and the reasons for the switchover of the reaction pathways upon the change of reaction conditions are provided.

Cascade Reactions by Nitric Oxide and Hydrogen Radical for Anti-Hypoxia Photodynamic Therapy Using an Activatable Photosensitizer

Organelle-targeted activatable photosensitizers are attractive to improve the specificity and controllability of photodynamic therapy (PDT), however, they suffer from a big problem in the photoactivity under both normoxia and hypoxia due to the limited diversity of phototoxic species (mainly reactive oxygen species). Herein, by effectively photocaging a π-conjugated donor-acceptor (D-A) structure with an N-nitrosamine substituent, we established a unimolecular glutathione and light coactivatable photosensitizer, which achieved its high performance PDT effect by targeting mitochondria through both type I and type II (dual type) reactions as well as secondary radicals-participating reactions. Of peculiar interest, hydrogen radical (H^•) was detected by electron spin resonance technique. The generation pathway of H^• via reduction of proton and its role in type I reaction were discussed. We demonstrated that the synergistic effect of multiple reactive species originated from tandem cascade reactions comprising reduction of O₂ by H^• to form O₂^•-/HO₂^• and downstream reaction of O₂^•- with ^•NO to yield ONOO^-. With a relatively large two-photon absorption cross section for photoexcitation in the near-infrared region (166 ± 22 GM at 800 nm) and fluorogenic property, the new photosensitizing system is very promising for broad biomedical applications, particularly low-light dose PDT, in both normoxic and hypoxic environments.

Thiol ligand capped quantum dot as an efficient and oxygen tolerance photoinitiator for aqueous phase radical polymerization and 3D printing under visible light

We report here a rapid visible-light-induced radical polymerization in aqueous media photoinitiated by only ppm level thiol ligand capped cadmium selenide quantum dots. The photoinitiation system could be readily employed for photo 3D printing.

Visible light photocatalysis in the late-stage functionalization of pharmaceutically relevant compounds

The late stage functionalization (LSF) of complex biorelevant compounds is a powerful tool to speed up the identification of structure-activity relationships (SARs) and to optimize ADME profiles. To this end, visible-light photocatalysis offers unique opportunities to achieve smooth and clean functionalization of drugs by unlocking site-specific reactivities under generally mild reaction conditions. This review offers a critical assessment of current literature, pointing out the recent developments in the field while emphasizing the expected future progress and potential applications. Along with paragraphs discussing the visible-light photocatalytic synthetic protocols so far available for LSF of drugs and drug candidates, useful and readily accessible synoptic tables of such transformations, divided by functional groups, will be provided, thus enabling a useful, fast, and easy reference to them.

Ag2 S-CdS p-n Nanojunction-Enhanced Photocatalytic Oxidation of Alcohols to Aldehydes

Selective oxidation of alcohols to aldehydes under mild conditions is important for the synthesis of high-value-added organic intermediates but still very challenging. For most of the thermal and photocatalytic systems, noble metal catalysts or harsh reaction conditions are required. Herein, the synthesis and use of Ag₂ S-CdS p-n nanojunctions as an efficient photocatalyst for selective oxidation of a series of aromatic alcohols to their corresponding aldehydes is reported. High quantum efficiencies (59.6% and 36.9% under 380 and 420 nm, respectively) are achieved in air atmosphere at room temperature. Photoluminescence and photo-electrochemical tests show that the excellent performance is mainly due to the p-n junction-enhanced charge separation and transfer for the activation of both O₂ (in air) and substrates. This study demonstrates the potential of p-n junction in photocatalytic synthesis under mild conditions.

Photocatalytic redox-neutral hydroxyalkylation of N-heteroaromatics with aldehydes

Hydroxyalkylation of N-heteroaromatics with aldehydes was achieved using a binary hybrid catalyst system comprising an acridinium photoredox catalyst and a thiophosphoric acid organocatalyst. The reaction proceeded through the following sequence: (1) photoredox-catalyzed single-electron oxidation of a thiophosphoric acid catalyst to generate a thiyl radical, (2) cleavage of the formyl C-H bond of the aldehyde substrates by a thiyl radical acting as a hydrogen atom transfer catalyst to generate acyl radicals, (3) Minisci-type addition of the resulting acyl radicals to N-heteroaromatics, and (4) a spin-center shift, photoredox-catalyzed single-electron reduction, and protonation to produce secondary alcohol products. This metal-free hybrid catalysis proceeded under mild conditions for a wide range of substrates, including isoquinolines, quinolines, and pyridines as N-heteroaromatics, as well as both aromatic and aliphatic aldehydes, and tolerated various functional groups. The reaction was applicable to late-stage derivatization of drugs and their leads.

Heterogeneous photocatalytic anaerobic oxidation of alcohols to ketones by Pt-mediated hole oxidation

We report a platinum nanocluster/graphitic carbon nitride (Pt/g-C₃N₄) composite solid catalyst with a photocatalytic anaerobic oxidation function for highly active and selective transformation of alcohols to ketones. The desirable products were successfully obtained in good to excellent yields from various functionalized alcohols at room temperature, including unactivated alcohols. Mechanistic studies indicated that the reaction could proceed through a Pt-mediated hole oxidation initiating an α-alcohol radical intermediate followed by a two-electron oxidation pathway. The merit of this strategy offers a general approach towards green and sustainable organic synthetic chemistry.