Insight into Ion Transfer through the Sub-Nanometer Channels in Zeolitic Imidazolate Frameworks

A covalent organic framework nanosheet-nanochannel composite with signal amplification strategy for electrochemical enantioselective recognition

Recognition and separation of chiral isomers are of great importance in both industrial and biological applications. However, owing to identical molecular formulas and chemical properties of enantiomers, signal transduction and amplification are still two major challenges in chiral sensing. In this study, we developed an enantioselective device by integrating chiral covalent organic framework nanosheets (CONs) with nanochannels for sensitive identification and quantification of enantiomers. Using 3,4-dihydroxyphenylalanine (DOPA) as the model analyte, the as-prepared chiral nanofluidic device exhibits a remarkable chiral recognition ability to l-DOPA than d-DOPA. More importantly, due to the chelation of DOPA with Fe3+ ions, it can efficiently block the ion transport through channel and shield the channel surface charge, which will amplify the difference in the electrochemical response of l-DOPA and d-DOPA. Therefore, a sensitive chiral recognition can be achieved using the present nanofluidic device coupled using electrochemical amplification strategy. Notably, using this method, an ultra-low concentration of l-DOPA (as low as 0.21 pM) can be facilely and successfully detected with a linear range of 1 pM-10 μM. This study provides a reliable and sensitive approach for achieving highly selective detection of chiral molecules.

An Insulin-Modified pH-Responsive Nanopipette Based on Ion Current Rectification

The properties of nanopipettes largely rely on the materials introduced onto their inner walls, which allow for a vast extension of their sensing capabilities. The challenge of simultaneously enhancing the sensitivity and selectivity of nanopipettes for pH sensing remains, hindering their practical applications. Herein, we report insulin-modified nanopipettes with excellent pH response performances, which were prepared by introducing insulin onto their inner walls via a two-step reaction involving silanization and amidation. The pH response intensity based on ion current rectification was significantly enhanced by approximately 4.29 times when utilizing insulin-modified nanopipettes compared with bare ones, demonstrating a linear response within the pH range of 2.50 to 7.80. In addition, insulin-modified nanopipettes featured good reversibility and selectivity. The modification processes were monitored using the I-V curves, and the relevant mechanisms were discussed. The effects of solution pH and insulin concentration on the modification results were investigated to achieve optimal insulin introduction. This study showed that the pH response behavior of nanopipettes can be greatly improved by introducing versatile molecules onto the inner walls, thereby contributing to the development and utilization of pH-responsive nanopipettes.

Catalytic ability characterization of in situ synthesized Pt NP coated SBA-15 within a sub-micropipette

An individual catalytic entity of an n-Pt/SBA-15 composite was synthesized in situ within a sub-micropipette nanoreactor, and its size-dependent catalytic ability was evaluated using the resistance pulse signals of O2 nanobubbles, originating from H2O2 decomposition catalyzed by decorated Pt NPs in the composite.

Perfect confinement of crown ethers in MOF membrane for complete dehydration and fast transport of monovalent ions

Fast transport of monovalent ions is imperative in selective monovalent ion separation based on membranes. Here, we report the in situ growth of crown ether@UiO-66 membranes at a mild condition, where dibenzo-18-crown-6 (DB18C6) or dibenzo-15-crown-5 is perfectly confined in the UiO-66 cavity. Crown ether@UiO-66 membranes exhibit enhanced monovalent ion transport rates and mono-/divalent ion selectivity, due to the combination of size sieving and interaction screening effects toward the complete monovalent ion dehydration. Specifically, the DB18C6@UiO-66 membrane shows a permeation rate (e.g., K+) of 1.2 mol per square meter per hour and a mono-/divalent ion selectivity (e.g., K+/Mg2+) of 57. Theoretical calculations and simulations illustrate that, presumably, ions are completely dehydrated while transporting through the DB18C6@UiO-66 cavity with a lower energy barrier than that of the UiO-66 cavity. This work provides a strategy to develop efficient ion separation membranes via integrating size sieving and interaction screening and to illuminate the effect of ion dehydration on fast ion transport.

Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization

Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.

Ion-Selective Micropipette Sensor for In Vivo Monitoring of Sodium Ion with Crown Ether-Encapsulated Metal-Organic Framework Subnanopores

In vivo sensing of the dynamics of ions with high selectivity is essential for gaining molecular insights into numerous physiological and pathological processes. In this work, we report an ion-selective micropipette sensor (ISMS) through the integration of functional crown ether-encapsulated metal-organic frameworks (MOFs) synthesized in situ within the micropipette tip. The ISMS features distinctive sodium ion (Na+) conduction and high selectivity toward Na+ sensing. The selectivity is attributed to the synergistic effects of subnanoconfined space and the specific coordination of 18-crown-6 toward potassium ions (K+), which largely increase the steric hindrance and transport resistance for K+ to pass through the ISMS. Furthermore, the ISMS exhibits high stability and sensitivity, facilitating real-time monitoring of Na+ dynamics in the living rat brain during spreading of the depression events process. In light of the diversity of crown ethers and MOFs, we believe this study paves the way for a nanofluidic platform for in vivo sensing and neuromorphic electrochemical sensing.

Ion transport based structural description for in situ synthesized SBA-15 nanochannels in a sub-micropipette

Construction of nanoporous arrays can greatly facilitate their development in the fields of sensing, energy conversion, and nanofluidic devices. It is important to characterize the structure and understand the ion transport behaviour of a nanoporous array, especially those prepared by in situ synthesis, which are difficult to be characterized by conventional methods. Herein, an inorganic and non-crystalline mesoporous silica SBA-15 is selected as a template, where a combination (GP-SBA-15) of a sub-micropipette and SBA-15 is constructed by in situ synthesis, and the multichannel array structure of GP-SBA-15 is illustrated by its ion transport properties from current-voltage responses. Experiments of linear scan voltammetry and chronoamperometry show a rapid accumulation and slow redistribution of ions in the surface-charged nanochannels, and the high/low currents originate from the accumulation/depletion of ions in the channels. The finite element simulation is introduced to calculate the effects of surface charge and pore size on ion rectification and ion concentration distribution. In addition, the short straight channels and long bending channels present in GP-SBA-15 are demonstrated by the voltage-independent resistance pulse signals in the translocation of BSA. This study shows that electrochemical means effectively provide insight into ion transport, achieve structural description and reveal the sensing potential of GP-SBA-15.

Homochiral Zeolitic Imidazolate Framework with Defined Chiral Microenvironment for Electrochemical Enantioselective Recognition

The recognition and separation of chiral molecules with similar structure are of great industrial and biological importance. Development of highly efficient chiral recognition systems is crucial for the precise application of these chiral molecules. Herein, a homochiral zeolitic imidazolate frameworks (c-ZIF) functionalized nanochannel device that exhibits an ideal platform for electrochemical enantioselective recognition is reported. Its distinct chiral binding cavity enables more sensitive discrimination of tryptophan (Trp) enantiomer pairs than other smaller chiral amino acids owing to its size matching to the target molecule. It is found that introducing neighboring aldehyde groups into the chiral cavity will result in an inferior chiral Trp recognition due to the decreased adsorption-energy difference of D- and L-Trp on the chiral sites. This study may provide an alternative strategy for designing efficient chiral recognition devices by utilizing the homochiral reticular materials and tailoring their chiral environments.

A multi-stimuli-responsive nanochannel inspired by biological disulfide bond

Disulfide bonds exist widely in channel protein and play an essential role in matter exchange and signal transduction (e.g., rhodopsin, canonical transient receptor potential 5 (TRPC5)). The research on disulfide bond in nanochannel is significant for the cognition of their biological functions. However, the fragility of biological channel limits the in-situ study and practical application. Herein, an innovative biologically-inspired artificial nanochannel based on disulfide bond (NCDS) with excellent durability, adjustable surface property is proposed. The constructed NCDS has a multi-response to UV-light, thiol (e.g., cysteine (Cys)) or pH stimulation, and can obtain reversibility after regulation by hydrogen peroxide (H₂O₂) or H⁺. The biomimetic NCDS shows great potential in biosensor and intelligent response design. This study also shines new light to channel protein based on disulfide bond that despite the nanochannel has specificity, it will be modulated by the change of nature environment, such as UV-light and chemical microenvironment (e.g., redox state and pH), which might be the reason of some disease.

Single Molecule Protein Segments Sequencing by a Plasmonic Nanopore

Obtaining sequential and conformational information on proteins is vital to understand their functions. Although the nanopore-based electrical detection can sense single molecule (SM) protein and distinguish among different amino acids, this approach still faces difficulties in slowing down protein translocation and improving ionic current signal-to-noise ratio. Here, we observe the unfolding and multistep sequential translocation of SM cytochrome c (cyt c) through a surface enhanced Raman scattering (SERS) active conical gold nanopore. High bias voltage unfolds SM protein causing more exposure of amino acid residues to the nanopore, which slows down the protein translocation. Specific SERS traces of different SM cyt c segments are then recorded sequentially when they pass through the hotspot inside the gold nanopore. This study shows that the combination of SM SERS with a nanopore can provide a direct insight into protein segments and expedite the development of nanopore toward SM protein sequencing.

Construction and Evaluation of Zeolitic Imidazolate Framework-Encapsulated Hemoglobin Microparticles as Oxygen Carriers

Artificial oxygen carriers, such as favorably hemoglobin-based oxygen carriers, have received considerable attention due to some drawbacks of human donor blood. Among all oxygen carriers, the metal organic framework (MOF) exhibits excellent oxygen-carrying capacity due to its good encapsulation efficiency and competitive biocompatibility. Recently, zeolitic imidazolate frameworks (ZIFs) with unique structure have attracted much attention due to their outstanding solvothermal stability. Notably, ZIF-8, the prototypical ZIF, has been utilized to load hemoglobin (Hb) as a potential blood substitute. In this work, another ZIF material, which possesses a high oxygen binding/release capability, suitable safety profile, high stability, and efficiency as a potential oxygen carrier, was used to encapsulate Hb in an environment-friendly condition.

A DNA-Schiff base functional nanopore sensing platform for the highly sensitive detection of Al3+ and Zn2+ ions

The combination of DNA nanotechnology and nanopore sensing technology has greatly promoted research on target molecule or ion detection. The large solid-state nanopores/nanochannels show better mechanical stability and reproducibility, but metal ion detection in the large nanopores with diameters of hundreds of nanometers or several micrometers is rarely reported. Hence, it is meaningful and urgent to develop a large nanopore-based sensing platform for the detection of metal ions. Herein, we employed a salicylic aldehyde-modified DNA network in conjunction with a glass nanopipette (GN) with a diameter of hundreds of nanometers as a sensing platform for the detection of target metal ions. Upon the addition of different receptors with the amino group, the salicylic aldehyde could in situ specifically recognize and bind with Zn²⁺ and Al³, forming Schiff base-metal ion complexes at the four vertices of one face per nanocube unit. The steric hindrance effect of multiple Schiff bases and metal ion complexes leads to the blockage of internal structure and decrease of ion current in the GN. Owing to this signal amplification strategy, the detection limit of the target metal ion reaches a level of fM in the GN with a diameter of about 300 nm. In the future, this functional nanopore sensing platform is expected to realize highly sensitive detection for more biological metal ions by choosing appropriate receptors.

Differences in water and vapor transport through angstrom-scale pores in atomically thin membranes

The transport of water through nanoscale capillaries/pores plays a prominent role in biology, ionic/molecular separations, water treatment and protective applications. However, the mechanisms of water and vapor transport through nanoscale confinements remain to be fully understood. Angstrom-scale pores (~2.8-6.6 Å) introduced into the atomically thin graphene lattice represent ideal model systems to probe water transport at the molecular-length scale with short pores (aspect ratio ~1-1.9) i.e., pore diameters approach the pore length (~3.4 Å) at the theoretical limit of material thickness. Here, we report on orders of magnitude differences (~80×) between transport of water vapor (~44.2-52.4 g m^-2 day^-1 Pa^-1) and liquid water (0.6-2 g m^-2 day^-1 Pa^-1) through nanopores (~2.8-6.6 Å in diameter) in monolayer graphene and rationalize this difference via a flow resistance model in which liquid water permeation occurs near the continuum regime whereas water vapor transport occurs in the free molecular flow regime. We demonstrate centimeter-scale atomically thin graphene membranes with up to an order of magnitude higher water vapor transport rate (~5.4-6.1 × 10⁴g m^-2 day^-1) than most commercially available ultra-breathable protective materials while effectively blocking even sub-nanometer (>0.66 nm) model ions/molecules.

Study on Ammonia Content and Distribution in the Microenvironment Based on Covalent Organic Framework Nanochannels

A crack-free micrometer-sized compact structure of 1,3,5-tris(4-aminophenyl)benzene-terephthaldehyde-covalent organic frameworks (TAPB-PDA-COFs) was constructed in situ at the tip of a theta micropipette (TMP). The COF-covered theta micropipette (CTP) then created a stable liquid-gas interface inside COF nanochannels, which was utilized to electrochemically analyze the content and distribution of ammonia gas in the microenvironments. The TMP-based electrochemical ammonia sensor (TEAS) shows a high sensing response, with current increasing linearly from 0 to 50,000 ppm ammonia, owing to the absorption of ammonia gas in the solvent meniscus that connects both barrels of the TEAS. The TEAS also exhibits a short response and recovery time of 5 ± 2 s and 6 ± 2 s, respectively. This response of the ammonia sensor is remarkably stable and repeatable, with a relative standard deviation of 6% for 500 ppm ammonia gas dispensing with humidity control. Due to its fast, reproducible, and stable response to ammonia gas, the TEAS was also utilized as a scanning electrochemical microscopy (SECM) probe for imaging the distribution of ammonia gas in a microspace. This study unlocks new possibilities for using a TMP in designing microscale probes for gas sensing and imaging.

Light-Controlled Ionic/Molecular Transport through Solid-State Nanopores and Nanochannels

Biological nanochannels perfectly operate in organisms and exquisitely control mass transmembrane transport for complex life process. Inspired by biological nanochannels, plenty of intelligent artificial solid-state nanopores and nanochannels are constructed based on various materials and methods with the development of nanotechnology. Specially, the light-controlled nanopores/nanochannels have attracted much attention due to the unique advantages in terms of that ion and molecular transport can be regulated remotely, spatially and temporally. According to the structure and function of biological ion channels, light-controlled solid-state nanopores/nanochannels can be divided into light-regulated ion channels with ion gating and ion rectification functions, and light-driven ion pumps with active ion transport property. In this review, we present a systematic overview of light-controlled ion channels and ion pumps according to the photo-responsive components in the system. Then, the related applications of solid-state nanopores/nanochannels for molecular sensing, water purification and energy conversion are discussed. Finally, a brief conclusion and short outlook are offered for future development of the nanopore/nanochannel field.

Light-Regulated Nanofluidic Ionic Diodes with Heterogeneous Channels Stemming from Asymmetric Growth of Metal-Organic Frameworks

Nanofluidic ionic diodes have attracted much attention, because of the unique property of asymmetric ion transport and promising applications in molecular sensing and biosensing. However, it remains a challenge to fabricate diode-like nanofluidic system with molecular-size pores. Herein, we report a new and facile approach to construct nanofluidic ionic diode by in situ asymmetric growth of metal-organic frameworks (MOFs) in nanochannels. We implement microwave-assisted strategy to obtain asymmetric distribution of MOFs in porous anodic aluminum oxide with barrier layer on one side. After etching the barrier layer and modifying with positively charged molecules, the nanofluidic device possesses asymmetric geometry and surface charge, performing the ionic current rectification (ICR) behavior in different electrolyte concentrations. Moreover, the ICR ratio is readily regulated with visible light illumination mainly due to the enhancement of surface charge of MOFs, which is further confirmed by finite element simulation. This study provides a reliable way to build the nanofluidic platform for investigating the asymmetric ion transport through the molecular-size pores, which is envisaged to be important for molecular sensing based on ICR with molecular-size pores.

Highly Sensitive Glass Nanopipette Sensor Using Composite Probes of DNA-Functionalized Metal-Organic Frameworks

Pore structure-based analytical techniques have great potential applications for the detection of biological molecules. However, the sophistication of traditional pore sensors is restricted in their applicability of analytical chemistry due to a lack of effective carrier probes. Here, we used porous coordination network-224 (PCN-224) composite probes in conjunction with a glass nanopipette (GN) as a sensing platform. The sensor exhibits a good fluorescence signal and a change in GN's ionic current at the same time. Due to the volume exclusion mechanism coming from PCN-224, the detection limit of target DNA reaches 10 fM in a GN with a diameter of up to ca. 260 nm, outperforming a simple probe. The structure of the composite probe is optimized by the probe's pairing efficiency. Furthermore, the sensor can also discriminate between 1-, 3-, and 5-mismatch DNA sequences and capture the target DNA from a complex mixture. Based on the GN platform, a series of techniques for detecting biomolecules are expected to emerge because of its simplicity, robustness, and universality by incorporating advanced nanoprobes.

Single Molecule DNA Analysis Based on Atomic-Controllable Nanopores in Covalent Organic Frameworks

We explored the application of two-dimensional covalent organic frameworks (2D COFs) in single molecule DNA analysis. Two ultrathin COF nanosheets were exfoliated with pore sizes of 1.1 nm (COF-1.1) and 1.3 nm (COF-1.3) and covered closely on a quartz nanopipette with an orifice of 20 ± 5 nm. COF nanopores exhibited high size selectivity for fluorescent dyes and DNA molecules. The transport of long (calf thymus DNA) and short (DNA-80) DNA molecules through the COF nanopores was studied. Because of the strong interaction between DNA bases and the organic backbones of COFs, the DNA-80 was transported through the COF-1.1 nanopore at a speed of 270 μs/base, which is the slowest speed ever observed compared with 2D inorganic nanomaterials. This study shows that the COF nanosheet can work individually as a nanopore monomer with controllable pore size like its biological counterparts.

Electrochemiluminescence Aptasensor for Charged Targets through the Direct Regulation of Charge Density in Microchannels

The change of surface charge density can cause many changes in physical or chemical properties and has been applied to design many sensitive sensors. Ochratoxin A (OTA) is a negatively charged target in neutral or alkaline solutions. In this work, a microchannel-based electrochemiluminescence (ECL) aptasensor for OTA detection based on this character had been designed. The charged target directly combined with functionalization layers of the microchannels, which caused surface charge density variation and therefore resulted in the change of ECL intensity of the (1,10-phenanthroline)ruthenium(II)/tripropylamine system. The decrease of ECL intensity is linearly dependent on OTA concentration ranging from 0.5 to 4 ng mL^-1 with a detection limit down to 0.17 ng mL^-1. This strategy has the advantages of simple interface chemistry design and universality, which offers a guiding significance for the charged target assay.

Enzyme-Encapsulated Zeolitic Imidazolate Frameworks Formed Inside the Single Glass Nanopore: Catalytic Performance and Sensing Application

Metal-organic frameworks (MOFs) can improve the stability and activity of enzymes under the MOF encapsulation. However, it remains a challenge to explore the effects of the MOF environment on enzymatic activity in a confined space. In this work, we immobilized the enzyme inside a glass nanopore to study the catalytic activity and stability of the enzyme in the MOF environment. Horseradish peroxidase (HRP) is encapsulated in zeolitic imidazolate framework-90 (ZIF-90) and zeolitic imidazolate framework-8 (ZIF-8), which are used as the catalytic platforms. The HRP can catalyze 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) molecules to generate ABTS⁺ ions, and the change of the transmembrane ion current will be monitored in real time. As the concentration of H₂O₂ increases, the amount of produced ABTS⁺ will increase; thus, the ionic current increases. The effects of the MOF structure on enzyme activity and stability are also investigated. The HRP encapsulated in the MOF and modified inside the nanopore provides a novel and unlabeled design for studying enzymatic catalysis in a confined environment, which should have extensive applications in chemical-/bio-sensing, electrocatalysis, and fundamental electrochemistry.

Metal-organic framework-based micropipette is a metal ion responsive nanochannel after adsorbing H2S

Glass micropipettes are easy to fabricate, have excellent flexibility and stable properties. HKUST-1 and MIL-68(In) are in situ grown in the tip of a micropipette to construct porous nanochannels. After absorbing H2S, the MIL-68(In)-based nanochannel shows effective metal ion responsiveness for Hg2+-detection.

Probing Multidimensional Structural Information of Single Molecules Transporting through a Sub-10 nm Conical Plasmonic Nanopore by SERS

Probing the orientation and oxygenation state of single molecules (SMs) is of great importance for understanding the advanced structure of individual molecules. Here, we manipulate molecules transporting through the hot spot of a sub-10 nm conical gold nanopore and acquire the multidimensional structural information of the SMs by surface enhanced Raman scattering (SERS) detection. The sub-10 nm size and conical shape of the plasmonic nanopore guarantee its high detection sensitivity. SERS spectra show a high correlation with the orientations of small-sized single rhodamine 6G (R6G) during transport. Meanwhile, SERS spectra of a single hemoglobin (Hb) reveal both the vertical/parallel orientations of the porphyrin ring and oxygenated/deoxygenated states of Hb. The present study provides a new strategy for bridging the primary sequence and the advanced structure of SMs.

Regional and functional division of functional elements of solid-state nanochannels for enhanced sensitivity and specificity of biosensing in complex matrices

Solid-state nanochannels (SSNs) provide a promising approach for biosensing due to the confinement of molecules inside, their great mechanical strength and diversified surface chemical properties; however, until now, their sensitivity and specificity have not satisfied the practical requirements of sensing applications, especially in complex matrices, i.e., media of diverse constitutions. Here, we report a protocol to achieve explicit regional and functional division of functional elements at the outer surface (FE_OS) and inner wall (FE_IW) of SSNs, which offers a nanochannel-based sensing platform with enhanced specificity and sensitivity. The protocol starts with the fabrication and characterization of the distribution of FE_OS and FE_IW. Then, the evaluation of the contributions of FE_OS and FE_IW to ionic gating is described; the FE_IW mainly regulate ionic gating, and the FE_OS can produce a synergistic effect. Finally, hydrophobic or highly charged FE_OS are applied to ward off interference molecules, non-target molecules that may affect the ionic signal of nanochannels, which decreases false signals and helps to achieve the highly specific ionic output in complex matrices. Compared with other methods currently available, this method will contribute to the fundamental understanding of substance transport in SSNs and provide high specificity and sensitivity in SSN-based analyses. The procedure takes 3-6 d to complete.

Ceramic-Polymer Composite Membranes for Water and Wastewater Treatment: Bridging the Big Gap between Ceramics and Polymers

Clean water supply is an essential element for the entire sustainable human society, and the economic and technology development. Membrane filtration for water and wastewater treatments is the premier choice due to its high energy efficiency and effectiveness, where the separation is performed by passing water molecules through purposely tuned pores of membranes selectively without phase change and additional chemicals. Ceramics and polymers are two main candidate materials for membranes, where the majority has been made of polymeric materials, due to the low cost, easy processing, and tunability in pore configurations. In contrast, ceramic membranes have much better performance, extra-long service life, mechanical robustness, and high thermal and chemical stabilities, and they have also been applied in gas, petrochemical, food-beverage, and pharmaceutical industries, where most of polymeric membranes cannot perform properly. However, one of the main drawbacks of ceramic membranes is the high manufacturing cost, which is about three to five times higher than that of common polymeric types. To fill the large gap between the competing ceramic and polymeric membranes, one apparent solution is to develop a ceramic-polymer composite type. Indeed, the properly engineered ceramic-polymer composite membranes are able to integrate the advantages of both ceramic and polymeric materials together, providing improvement in membrane performance for efficient separation, raised life span and additional functionalities. In this overview, we first thoroughly examine three types of ceramic-polymer composite membranes, (i) ceramics in polymer membranes (nanocomposite membranes), (ii) thin film nanocomposite (TFN) membranes, and (iii) ceramic-supported polymer membranes. In the past decade, great progress has been made in improving the compatibility between ceramics and polymers, while the synergy between them has been among the main pursuits, especially in the development of the high performing nanocomposite membranes for water and wastewater treatment at lowered manufacturing cost. By looking into strategies to improve the compatibility among ceramic and polymeric components, we will conclude with briefing on the perspectives and challenges for the future development of the composite membranes.

Micrometer-scale transient ion transport for real-time pH assay in living rat brains

Ion transport has been widely used for various applications such as sensing, desalination and energy conversion; however, nearly all applications are based on steady-state ion transport. Herein, we for the first time demonstrate the capability of transient ion transport for in vivo sensing with both high spatial (∼μm) and temporal (∼ms) resolution by using pH as the model target. Transient ion transport behavior (i.e., time-dependent ion current change) was observed by applying high-frequency pulse potential. Importantly, we proposed the ion distribution transient model for this time-dependent ion transport behavior. With this model, the temporal resolution of the as-developed pH microsensor based on ion current was improved to the ms level, thus satisfying the requirement of neurochemical recording. Moreover, our microsensor features good reproducibility, selectivity, and reversibility, and can thus real-time monitor the pH change in living rat brains. This study demonstrates the first example of in vivo sensing based on ion transport, opening a new way to neurochemical monitoring with ultrahigh spatiotemporal resolution. This study is also helpful to understand the transient process of asymmetric ion transport.

Efficient Gating of Ion Transport in Three-Dimensional Metal-Organic Framework Sub-Nanochannels with Confined Light-Responsive Azobenzene Molecules

1D nanochannels modified with responsive molecules are fabricated to replicate gating functionalities of biological ion channels, but gating effects are usually weak because small molecular gates cannot efficiently block the large channels in the closed states. Now, 3D metal-organic framework (MOF) sub-nanochannels (SNCs) confined with azobenzene (AZO) molecules achieve efficient light-gating functionalities. The 3D MOFSNCs consisting of a MOF UiO66 with ca. 9-12 Å cavities connected by ca. 6 Å triangular windows work as angstrom-scale ion channels, while confined AZO within the MOF cavities function as light-driven molecular gates to efficiently regulate the ion flux. The AZO-MOFSNCs show good cyclic gating performance and high on-off ratios up to 17.8, an order of magnitude higher than ratios observed in conventional 1D AZO-modified nanochannels (1.3-1.5). This work provides a strategy to develop highly efficient switchable ion channels based on 3D porous MOFs and small responsive molecules.

SERS Detection of Nucleobases in Single Silver Plasmonic Nanopores

Conventional ion current-based nanopore techniques that identify single molecules are hampered by limitations of providing only the ionic current information. Here, we introduce a silver nanotriangle-based nanopore (diameter < 50 nm) system for detecting molecule translocation using surface-enhanced Raman scattering. Rhodamine 6G is used as a model molecule to study the effect of an electric field (-1 V) on the mass transport. The four DNA bases also show significantly different SERS signals when they are transported into the plasmonic nanopore. The observations suggest that in the electric field, analyte molecules are driven into the nanopipette through the hot spot of the silver nanopore. The plasmonic nanopore shows great potential as a highly sensitive SERS platform for detecting molecule transport and paves the way for single molecule probing.

Ion current rectification in combination with ion current saturation

Over the decades, nanochannels have been widely used for single molecule detection, smart sensors, and energy transfer and storage based on its unique ion transport properties. Although various ion transport phenomena of nanochannels have been reported, the discovery of new ion transport phenomena is still of great significance for understanding material transport of nanochannels and development of nanodevices with unique working capabilities. This article reports a novel nanochannel ion transport phenomenon - ion current rectification in combination with ion current saturation (ICR-S), which arised from a mesoporous titania conical microplug generated in situ in the glass micropipette tip cavity by space confinement evaporation. The ion current of forward voltage is greater than that of reverse voltage, and the saturation currents appear in both the forward and reverse voltages, the ratio of forward and reverse saturation current can reaches to 10. In addition, the influence of pH, ionic strength, and micropipette angle on ICR-S is also investigated.

Mass Transfer Modulation and Gas Mapping Based on Covalent Organic Frameworks-Covered Theta Micropipette

Covalent organic frameworks (COFs) consist nanochannels that are fundamentally important for their application. Up to now, the effect of gas phase on COF nanochannels are hard to explore. Here, TAPB-PDA-COFs (triphenylbenzene-terephthaldehyde-COFs) was synthesized in situ at the tip of a theta micropipette. The COF-covered theta micropipette (CTP) create a stable gas-liquid interface inside the COF nanochannels, through which the humidity-modulated ion mass transfer in the COF nanochannels can be recorded by recording the current across the two channels of the theta micropipette. Results show that the humid air changes the mobility of the ions inside the COF nanochannels, which leads to the change of ionic current. Humid air showed different effects on the ion transfer depending on the solvent polarity index and vapor pressure. Current decreases linearly with the increase of relative humidity (RH) from 11% to 98%. The CTP was also mounted on the scanning electrochemical microscopy as a probe electrode for mapping micrometer-scale humidity distribution.

An ionic diode based on a spontaneously formed polypyrrole-modified graphene oxide membrane

Asymmetric membranes derived from the stacking of graphene oxide (GO) nanosheets have attracted great attention for the fabrication of ionic diodes. Herein, we described an ionic diode based on a polypyrrole-modified GO membrane with a vertical asymmetry, which was achieved by a spontaneous oxidation polymerization of pyrrole monomers on one side of the GO membrane in vapor phase. This asymmetric modification resulted in an asymmetric geometry due to the occupation of the interlayer space of one side of the GO membrane by polypyrrole. Our ionic diode demonstrated an obvious ionic rectification behavior over a wide voltage range. A calculation based on Poisson-Nernst-Planck equations was used to theoretically investigate the role of asymmetric modification of polypyrrole.

Coupled Electrical Conduction in Coordination Polymers: From Electrons/Ions to Mixed Charge Carriers

The coupled transport of ions and electrons is of great potential for next-generation sensors, energy storage and conversion devices, optoelectronics, etc. Coordination polymers (CPs) intrinsically have both transport pathways for electrons and ions, however, the practical conductivities are usually low. In recent years, significant advances have been made in electronic or ionic conductive coordination polymers, which also results in progress in mixed ionic-electronic conductive coordination polymers. Here we start from electronic and ionic conductive CPs to mixed ionic-electronic conductive CPs. Recent advances in the design of mixed ionic-electronic conductive CPs are summarized. In addition, devices based on mixed conduction are selected.

The Confinement Effect of Angstrom-Sized Pores in Asymmetrical Membrane Constructed by Zeolitic Imidazolate Frameworks: Partially Dehydrated Ion Transport Performance

The confinement effect in asymmetrical biological ion channels makes the state of molecules and ions differs from that in the external environment, and the mass transfer confined in the biological ion channels is in a single strand form. Herein, an asymmetrical membrane with angstrom-sized pores is constructed by growth of ZIF-90 membrane on the porous anodic aluminum oxide film. Due to the confinement effect of angstrom-sized pores of ZIF-90, ions transport through the pores of ZIF-90 suffer from multiple dehydration-hydration-dehydration process in the form of a single ionic chain. Molecular dynamics simulations imply that ions inside the pores of ZIF-90 are partially dehydrated. In alkaline condition, high rectification ratios of 237, 295, and 357 can be achieved in 10 × 10^-3 m KCl, NaCl, and LiCl electrolyte, respectively. Besides, the strong electrostatic interaction between ions and the confined ZIF-90 pores makes the ions transport through the asymmetrical membrane suffer from an energy barrier, and the energy barrier is different with different ion species. This work helps to understand the ions transfer mechanism through angstrom-sized pores, which can provide guidance for the design of asymmetrical membrane and boost their applications.

Two dimensional nanomaterial-based separation membranes

Two dimensional nanomaterials including graphene, hexagonal boron-nitride, molybdenum disulfide, etc., provide immense potentials for separation applications. However, the tradeoff between selectivity and permeability in choosing 2D nanomaterial-based membrane is inevitable, limiting the progress on separation efficiency for mass industrial applications. To target these issues, versatile strategies such as the rational design of predefined interlayer channels, membrane nanopores, and reasonable functionalization, as well as new mechanisms have been emerged. In this review, we introduce the recent progress on separation mechanisms of 2D nanomaterial-based membranes with different structures (including the interlayer channels type and the membrane nanopores type) and their inner surface functionalization. Moreover, the interface designs are discussed, in terms of employing dynamic liquid-liquid/liquid-gas interfaces, to advance the selectivity and permeability of the membranes. We further discuss the variety of separation applications based on 2D nanomaterial-based membranes. The authors hope this review will inspire the active interest of many scientists in the area of the development and application of membrane science.

Recognition of plastic nanoparticles using a single gold nanopore fabricated at the tip of a glass nanopipette

A single gold nanopore with high surface enhanced Raman spectroscopy (SERS) activity is fabricated on the tip of a glass nanopipette.

Ionic Current Rectification by Laminated Bipolar Silica Isoporous Membrane

Ionic current rectification (ICR) is one of interesting characteristics displayed by nanochannels with asymmetric geometry, ionic concentration or charge distribution, which has been utilized for the development of chemical sensors and biosensors. Herein we report the ICR phenomenon observed with ultrathin silica isoporous membrane (SIM), which was prepared by laminating two layers of SIM with opposite charges and different pore diameters, designated as bipolar SIM (bp-SIM). The negatively charged layer, called as n-SIM, was 86 nm-thick and consisted of channels with a diameter of 2-3 nm. The positively charged layer with a thickness of 59 nm, termed as p-SIM, was comprised of channels of 4.5-5.5 nm in diameter. They were primarily grown on the solid surface using the Stöber-solution and biphasic-stratification growth approaches, respectively, and then exfoliated to obtain perforated structures by the polymer-protected chemical etching and transfer method. The negative charges of n-SIM and positive ones of p-SIM were generated by the deprotonation of pristine surface silanol and postmodified ammonium groups, respectively. Neither n-SIM nor p-SIM alone displays the ICR characteristic, because of their symmetric structure and uniform charge distribution. When laminating two of them, an apparent ICR characteristic was observed for the bp-SIM with a typical diode-like current-voltage response. This behavior was rationalized to arise from the asymmetric charge distribution on two layers by finite element simulations. Considering the facile preparation and diverse surface functionalities, as well as its uniform and highly porous structure, the bp-SIM provides an attractive platform for designing ICR-based sensors.

Ionic Current Behaviors of Dual Nano- and Micropipettes

Ionic current rectification (ICR) phenomena within dual glass pipettes are investigated for the first time. We demonstrate that the ionic flow presents different behaviors in dual nano- and micropipettes when the two channels are filled with the same electrolyte KCl and hung in air. Bare dual nanopipettes cannot rectify the ionic current because of their geometric symmetry, but the ICR can be directly observed based on bare dual micropipettes. The phenomena based on dual micropipettes could be explained by the simulation of the Poisson-Nernst-Plank equation. After modification with different approaches, the dual nanopipettes have asymmetric charge patterns and show various ICR behaviors. They have been successfully employed to fabricate various nanodevices, such as ionic diodes and bipolar junction transistors. Due to the simple and fast fabrication with high reproducibility, these dual pipettes can provide a novel platform for controlling ionic flow in nano- and microfluidics, fabrication of novel nanodevices, and detection of biomolecules.