Unleashing the Potential of 17 O NMR Spectroscopy Using Mechanochemistry

High-Resolution 17O Solid-State NMR as a Unique Probe for Investigating Oxalate Binding Modes in Materials: The Case Study of Calcium Oxalate Biominerals

Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.

1H/17O Chemical Shift Waves in Carboxyl-Bridged Hydrogen Bond Networks in Organic Solids

We report solid-state 1H and 17O NMR results for four 17O-labeled organic compounds each containing an extensive carboxyl-bridged hydrogen bond (CBHB) network in the crystal lattice: tetrabutylammonium hydrogen di-[17O2]salicylate (1), [17O4]quinolinic acid (2), [17O4]dinicotinic acid (3), and [17O2]Gly/[17O2]Gly·HCl cocrystal (4). The 1H isotropic chemical shifts found for protons involved in different CBHB networks are between 8.2 and 20.5 ppm, which reflect very different hydrogen-bonding environments. Similarly, the 17O isotropic chemical shifts found for the carboxylate oxygen atoms in CBHB networks, spanning a large range between 166 and 341 ppm, are also remarkably sensitive to the hydrogen-bonding environments. We introduced a simple graphical representation in which 1H and 17O chemical shifts are displayed along the H and O atomic chains that form the CBHB network. In such a depiction, because wavy patterns are often observed, we refer to these wavy patterns as 1H/17O chemical shift waves. Typical patterns of 1H/17O chemical shift waves in CBHB networks are discussed. The reported 1H and 17O NMR parameters for the CBHB network models examined in this study can serve as benchmarks to aid in spectral interpretation for CBHB networks in proteins.

Probing oxygen exchange between UiO-66(Zr) MOF and water using 17 O solid-state NMR

The Zr-based Metal Organic Framework (MOF) UiO-66(Zr) is widely employed owing to its good thermal and chemical stabilities. Although the long-range structure of this MOF is preserved in the presence of water during several days, little is known about the formation of defects, which cannot be detected using diffraction techniques. We apply here 17 O solid-state NMR spectroscopy at 18.8 T to investigate the reactivity of UiO-66, through the exchange of oxygen atoms between the different sites of the MOF and water. For that purpose, we have selectively enriched in 17 O isotope the carboxylate groups of UiO-66(Zr) by using it with 17 O-labeled terephthalic acid prepared using mechanochemistry. In the presence of water at 50 °C and a following dehydration at 150 °C, we observe an overall exchange of O atoms between COO- and μ3 -O2- sites. Furthermore, we demonstrate that the three distinct oxygen sites, μ3 -OH, μ3 -O2- and COO- , of UiO-66(Zr) MOF can be enriched in 17 O isotope by post-synthetic hydrothermal treatment in the presence of 17 O-enriched water. These results demonstrate the lability of Zr-O bonds and the reactivity of UiO-66(Zr) with water.

Disorder and Oxide Ion Diffusion Mechanism in La1.54Sr0.46Ga3O7.27 Melilite from Nuclear Magnetic Resonance

Layered tetrahedral network melilite is a promising structural family of fast ion conductors that exhibits the flexibility required to accommodate interstitial oxide anions, leading to excellent ionic transport properties at moderate temperatures. Here, we present a combined experimental and computational magic angle spinning (MAS) nuclear magnetic resonance (NMR) approach which aims at elucidating the local configurational disorder and oxide ion diffusion mechanism in a key member of this structural family possessing the La1.54Sr0.46Ga3O7.27 composition. 17O and 71Ga MAS NMR spectra display complex spectral line shapes that could be accurately predicted using a computational ensemble-based approach to model site disorder across multiple cationic and anionic sites, thereby enabling the assignment of bridging/nonbridging oxygens and the identification of distinct gallium coordination environments. The 17O and 71Ga MAS NMR spectra of La1.54Sr0.46Ga3O7.27 display additional features not observed for the parent LaSrGa3O7 phase which are attributed to interstitial oxide ions incorporated upon cation doping and stabilized by the formation of five-coordinate Ga centers conferring framework flexibility. 17O high-temperature (HT) MAS NMR experiments capture exchange within the bridging oxygens at 130 °C and reveal coalescence of all oxygen signals in La1.54Sr0.46Ga3O7.27 at approximately 300 °C, indicative of the participation of both interstitial and framework oxide ions in the transport process. These results further supported by the coalescence of the 71Ga resonances in the 71Ga HT MAS NMR spectra of La1.54Sr0.46Ga3O7.27 unequivocally provide evidence of the conduction mechanism in this melilite phase and highlight the potential of MAS NMR spectroscopy to enhance the understanding of ionic motion in solid electrolytes.

On the use of 17O NMR for understanding molecular and silica-grafted tungsten oxo siloxide complexes

¹⁷O-labelled tungsten siloxide complexes [WOCl₂(OSitBu₃)₂] (1-Cl) and [WOMe₂(OSitBu₃)₂] (1-Me) were prepared and characterized by ¹⁷O MAS NMR, with input from theoretical calculations of NMR parameters. Guidelines linking ¹⁷O NMR parameters and the coordination sphere of molecular and silica-grafted tungsten oxo species are proposed. The grafting of 1-Me on SiO_2-700 afforded material 2, with surface species [(SiO)WOMe₂(OSitBu₃)] as shown by elemental analysis, IR and ¹H and ¹³C MAS NMR. The DFT calculations of the grafting mechanism are in line with the observed reactivity. They indicate the occurrence of several isomeric species of close energy for the grafted W centers, precluding efficient ¹⁷O MAS NMR studies. The lack of catalytic activity in olefin metathesis and ring-opening olefin metathesis polymerization indicates that initiation by α-H elimination is not operative in 2, contrary to related tungsten surface species, which illustrates the crucial influence of the nature of the metal coordination sphere.

Ex Situ Generation of 18O2 and 17O2 from Endoperoxides for *O-Labeling and Mechanistic Studies of Oxidations by Dioxygen

Near-stoichiometric amounts of ¹⁸O₂ and ¹⁷O₂ were generated ex situ from endoperoxides in a two-chamber glassware to oxidize various substrates. This strategy gave [*O₂]endoperoxides, [*O₁]quinones, [*O₁]phenols, and [*O_x]artemisin in moderate to good yields and high isotopic enrichments (up to 84%) at affordable costs. Moreover, mass spectrometry and ¹⁷O NMR of the [*O]products provided valuable information about the chemical mechanisms involved.

Characterization of peptide O⋯HN hydrogen bonds via1H-detected 15N/17O solid-state NMR spectroscopy

High sensitivity and resolution solid-state NMR methods are reported, that straightforwardly select hydrogen-bonded 15N-17O pairs from amongst all other nitrogen and oxygen sites in peptides, to aid protein secondary and tertiary structure determination. Significantly improved sensitivity is obtained with indirect 1H detection under fast MAS and stronger relayed dipole couplings.

Fast and Cost-Efficient 17 O-Isotopic Labeling of Carboxylic Groups in Biomolecules: From Free Amino Acids to Peptide Chains

¹⁷ O NMR spectroscopy is a powerful technique, which can provide unique information regarding the structure and reactivity of biomolecules. However, the low natural abundance of ¹⁷ O (0.04 %) generally requires working with enriched samples, which are not easily accessible. Here, we present simple, fast and cost-efficient ¹⁷ O-enrichment strategies for amino acids and peptides by using mechanochemistry. First, five unprotected amino acids were enriched under ambient conditions, consuming only microliter amounts of costly labeled water, and producing pure molecules with enrichment levels up to ∼40 %, yields ∼60-85 %, and no loss of optical purity. Subsequently, ¹⁷ O-enriched Fmoc/tBu-protected amino acids were produced on a 1 g/day scale with high enrichment levels. Lastly, a site-selective ¹⁷ O-labeling of carboxylic functions in peptide side-chains was achieved for RGD and GRGDS peptides, with ∼28 % enrichment level. For all molecules, ¹⁷ O ssNMR spectra were recorded at 14.1 T in reasonable times, making this an important step forward for future NMR studies of biomolecules.

First Direct Insight into the Local Environment and Dynamics of Water Molecules in the Whewellite Mineral Phase: Mechanochemical Isotopic Enrichment and High-Resolution 17O and 2H NMR Analyses

Calcium oxalate minerals of the general formula CaC2O4 . xH2O are widely present in nature and usually associated with pathological calcifications, constituting up to 70-80% of the mineral component of renal calculi. The monohydrate phase (CaC2O4 .H2O, COM) is the most stable form, accounting for the majority of the hydrated calcium oxalates found. These mineral phases have been studied extensively via X-ray diffraction and IR spectroscopy and, to a lesser extent, using 1H, 13C, and 43Ca solid-state NMR spectroscopy. However, several aspects of their structure and reactivity are still unclear, such as the evolution from low- to high-temperature COM structures (LT-COM and HT-COM, respectively) and the involvement of water molecules in this phase transition. Here, we report for the first time a 17O and 2H solid-state NMR investigation of the local structure and dynamics of water in the COM phase. A new procedure for the selective 17O- and 2H-isotopic enrichment of water molecules within the COM mineral is presented using mechanochemistry, which employs only microliter quantities of enriched water and leads to exchange yields up to ∼30%. 17O NMR allows both crystallographically inequivalent water molecules in the LT-COM structure to be resolved, while 2H NMR studies provide unambiguous evidence that these water molecules are undergoing different types of motions at high temperatures without exchanging with one another. Dynamics appear to be essential for water molecules in these structures, which have not been accounted for in previous structural studies on the HT-COM structure due to lack of available tools, highlighting the importance of such NMR investigations for refining the overall knowledge on biologically relevant minerals like calcium oxalates.

Residue-Specific High-Resolution 17O Solid-State Nuclear Magnetic Resonance of Peptides: Multidimensional Indirect 1H Detection and Magic-Angle Spinning

Oxygen is an integral component of proteins but remains sparsely studied because its only NMR active isotope, ¹⁷O, has low sensitivity, low resolution, and large quadrupolar couplings. These issues are addressed here with efficient isotopic labeling, high magnetic fields, fast sample spinning, and ¹H detection in conjunction with multidimensional experiments to observe oxygen sites specific to each amino acid residue. Notably, cross-polarization at high sample spinning frequencies provides efficient ¹³C ↔ ¹⁷O polarization transfer. The use of ¹⁷O for initial polarization is found to provide better sensitivity per unit time compared to ¹H. Sharp isotropic ¹⁷O peaks are obtained by using a low-power multiple-quantum sequence, which in turn allows extraction of quadrupolar parameters for each oxygen site. Finally, the potential to determine sequential assignments and long-range distance restraints is demonstrated by using 3D ¹H/¹³C/¹⁷O experiments, suggesting that such methods can become an essential tool for biomolecular structure determination.

Rapid, Quantitative Nuclear Magnetic Resonance Test for Oxygen-17 Enrichment in Water

Nuclear magnetic resonance (NMR) studies involving ¹⁷O are increasingly important in molecular biology, material science, and other disciplines. A large number of these studies employ H₂¹⁷O as a source of ¹⁷O, and this reliance can be limiting because the high cost of H₂¹⁷O. To overcome this constraint, a recent study proposed a distillation scheme capable of producing significant quantities of H₂¹⁷O at a low cost. Although this method is reported to be effective, the reactions proposed to quantify percent of ¹⁷O enrichment are either time intensive or have a risk of errors due to the isotope effect. Here, an alternative reaction scheme is described to measure ¹⁷O water that ultimately creates methyl benzoate as the sole ¹⁷O-containing product. The proposed reaction is completed in a matter of minutes at room temperature, produces only one ¹⁷O product, and requires no clean-up step. The large isotope shift observed in solution NMR between the ¹³C═¹⁶O and ¹³C═¹⁷O resonances allows for integration of the individual peaks. This ¹³C NMR analysis is found to be highly accurate over a wide enrichment range and is accessible to most NMR spectroscopists.

From Operando Raman Mechanochemistry to "NMR Crystallography": Understanding the Structures and Interconversion of Zn-Terephthalate Networks Using Selective 17O-Labeling

The description of the formation, structure, and reactivity of coordination networks and metal-organic frameworks (MOFs) remains a real challenge in a number of cases. This is notably true for compounds composed of Zn2+ ions and terephthalate ligands (benzene-1,4-dicarboxylate, BDC) because of the difficulties in isolating them as pure phases and/or because of the presence of structural defects. Here, using mechanochemistry in combination with operando Raman spectroscopy, the observation of the formation of various zinc terephthalate compounds was rendered possible, allowing the distinction and isolation of three intermediates during the ball-milling synthesis of Zn3(OH)4(BDC). An "NMR crystallography" approach was then used, combining solid-state NMR (1H, 13C, and 17O) and density functional theory (DFT) calculations to refine the poorly described crystallographic structures of these phases. Particularly noteworthy are the high-resolution 17O NMR analyses, which were made possible in a highly efficient and cost-effective way, thanks to the selective 17O-enrichment of either hydroxyl or terephthalate groups by ball-milling. This allowed the presence of defect sites to be identified for the first time in one of the phases, and the nature of the H-bonding network of the hydroxyls to be established in another. Lastly, the possibility of using deuterated precursors (e.g., D2O and d 4-BDC) during ball-milling is also introduced as a means for observing specific transformations during operando Raman spectroscopy studies, which would not have been possible with hydrogenated equivalents. Overall, the synthetic and spectroscopic approaches developed herein are expected to push forward the understanding of the structure and reactivity of other complex coordination networks and MOFs.

Racing toward Fast and Effective 17O Isotopic Labeling and Nuclear Magnetic Resonance Spectroscopy of N-Formyl-MLF-OH and Associated Building Blocks

Solid-state ¹H, ¹³C, and ¹⁵N nuclear magnetic resonance (NMR) spectroscopy has been an essential analytical method in studying complex molecules and biomolecules for decades. While oxygen-17 (¹⁷O) NMR is an ideal and robust candidate to study hydrogen bonding within secondary and tertiary protein structures for example, it continues to elude many. We discuss an improved multiple-turnover labeling procedure to develop a fast and cost-effective method to ¹⁷O label fluoroenylmethyloxycarbonyl (Fmoc)-protected amino acid building blocks. This approach allows for inexpensive ($0.25 USD/mg) insertion of ¹⁷O labels, an important barrier to overcome for future biomolecular studies. The ¹⁷O NMR results of these building blocks and a site-specific strategy for labeled N-acetyl-MLF-OH and N-formyl-MLF-OH tripeptides are presented. We showcase growth in NMR development for maximizing sensitivity gains using emerging sensitivity enhancement techniques including population transfer, high-field dynamic nuclear polarization, and cross-polarization magic-angle spinning cryoprobes.

17 O solid-state NMR at ultrahigh magnetic field of 35.2 T: Resolution of inequivalent oxygen sites in different phases of MOF MIL-53(Al)

MIL-53(Al) is a member of the most extensively studied metal-organic framework (MOF) families owing to its "flexible" framework and superior stability. 17 O solid-state NMR (SSNMR) spectroscopy is an ideal site-specific characterization tool as it probes local oxygen environments. Because oxygen local structure is often altered during phase change, 17 O SSNMR can be used to follow phase transitions. However, 17 O is a challenging nucleus to study via SSNMR due to its low sensitivity and resolution arising from the very low natural abundance of 17 O isotope and its quadrupolar nature. In this work, we describe that by using 17 O isotopic enrichment and performing 17 O SSNMR experiments at an ultrahigh magnetic field of 35.2 T, all chemically and crystallographically inequivalent oxygen sites in two representative MIL-53(Al) (as-made and water adsorbed) phases can be completely resolved. The number of signals in each phase is consistent with that predicted from the space group refined from powder X-ray diffraction data. The 17 O 1D magic-angle spinning (MAS) and 2D triple-quantum MAS (3QMAS) spectra at 35.2 T furnish fine information about the host-guest interactions and the structural changes associated with phase transition. The ability to completely resolve multiple chemically and crystallographically inequivalent oxygen sites in MOFs at very high magnetic field, as illustrated in this work, significantly enhances the potential for using the NMR crystallography approach to determine crystal structures of new MOFs and verify the structures of existing MOFs obtained from refining powder X-ray diffraction data.

Looking into the dynamics of molecular crystals of ibuprofen and terephthalic acid using 17 O and 2 H nuclear magnetic resonance analyses

Oxygen-17 and deuterium are two quadrupolar nuclei that are of interest for studying the structure and dynamics of materials by solid-state nuclear magnetic resonance (NMR). Here, 17 O and 2 H NMR analyses of crystalline ibuprofen and terephthalic acid are reported. First, improved 17 O-labelling protocols of these molecules are described using mechanochemistry. Then, dynamics occurring around the carboxylic groups of ibuprofen are studied considering variable temperature 17 O and 2 H NMR data, as well as computational modelling (including molecular dynamics simulations). More specifically, motions related to the concerted double proton jump and the 180° flip of the H-bonded (-COOH)2 unit in the crystal structure were looked into, and it was found that the merging of the C=O and C-OH 17 O resonances at high temperatures cannot be explained by the sole presence of one of these motions. Lastly, preliminary experiments were performed with a 2 H-17 O diplexer connected to the probe. Such configurations can allow, among others, 2 H and 17 O NMR spectra to be recorded at different temperatures without needing to tune or to change probe configurations. Overall, this work offers a few leads which could be of use in future studies of other materials using 17 O and 2 H NMR.

Exploring cation disorder in mixed-metal pyrochlore ceramics using 17 O NMR spectroscopy and first-principles calculations

Characterising the local structures (e.g., the cation distribution) of mixed-metal ceramics by NMR spectroscopy is often challenging owing to the unfavourable properties (low γ, large quadrupole moment and/or low abundance) of many metal nuclei. ¹⁷ O is an attractive option owing to the prevalence of oxygen within ceramics. The moderate γ and small quadrupole moment of ¹⁷ O mean that the greatest barrier to accessing the information available from this nucleus is isotopic enrichment. We explore the challenges of ensuring uniform isotopic enrichment with ¹⁷ O₂ (g) for the pyrochlore solid solutions, Y₂ Sn_x Ti_2-x O₇ , La₂ Sn_x Zr_2-x O₇ and La₂ Sn_x Hf_2-x O₇ , demonstrating that high enrichment temperatures (900 °C for 12 hr) are required. In addition, for sites with very high symmetry (such as the tetrahedral OY4 and OLa4 sites with C_Q  ≈ 0 present here), we demonstrate that quantitative ¹⁷ O NMR spectra require correction for the differing contributions from the centreband of the satellite transitions, which can be as high as a factor of ~3.89. It is common to use first-principles calculations to aid in interpreting NMR spectra of disordered solids. Here, we use an ensemble modelling approach to ensure that all possible cation arrangements are modelled in the minimum possible number of calculations. By combining uniform isotopic enrichment, quantitative NMR spectroscopy and a comprehensive computational approach, we are able to show that the cation distribution in Y₂ Sn_x Ti_2-x O₇ is essentially random, whereas in La₂ Sn_x Zr_2-x O₇ and La₂ Sn_x Hf_2-x O₇ , OLa2SnZr and OLa2SnHf sites are slightly energetically disfavoured, leading to a weak preference for clustering of like cations.

Cost-efficient and user-friendly 17O/18O labeling procedures of fatty acids using mechanochemistry

Two mechanochemical procedures for 17O/18O-isotope labeling of fatty acids are reported: a carboxylic acid activation/hydrolysis approach and a saponification approach. The latter route allowed first-time enrichment of important polyunsaturated fatty acids (PUFAs) including docosahexaenoic acid (DHA). Overall, a total of 9 pure labeled products were isolated in high yields (≥80%) and with high enrichment levels (≥37% average labeling of C=O and C-OH carboxylic oxygen atoms), under mild conditions, and in short time ( Collapse

Key Words Collapse

MESH Headings

• Costs and Cost Analysis
• Isotope Labeling/economics
• Mechanical Phenomena
• Oxygen Isotopes/chemistry

Collapse

Grants

• H2020 European Research Council
• Centre National de la Recherche Scientifique

Collapse

Affiliation(s)

Jessica Špačková ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Charlyn Fabra ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Guillaume Cazals IBMM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Marie Hubert-Roux Normandie Univ., COBRA UMR 6014 and FR 3038 Univ. Rouen, INSA Rouen, CNRS IRCOF, Mont-Saint-Aignan, France
Isabelle Schmitz-Afonso Normandie Univ., COBRA UMR 6014 and FR 3038 Univ. Rouen, INSA Rouen, CNRS IRCOF, Mont-Saint-Aignan, France
Ieva Goldberga ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Dorothée Berthomieu ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Aurélien Lebrun IBMM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Thomas-Xavier Métro IBMM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.
Danielle Laurencin ICGM, Univ Montpellier, CNRS, ENSCM, Montpellier, France.

Collapse

Raman spectroscopy for real-time and in situ monitoring of mechanochemical milling reactions

Solid-state milling has emerged as an alternative, sustainable approach for preparing virtually all classes of compounds and materials. In situ reaction monitoring is essential to understanding the kinetics and mechanisms of these reactions, but it has proved difficult to use standard analytical techniques to analyze the contents of the closed, rapidly moving reaction chamber (jar). Monitoring by Raman spectroscopy is an attractive choice, because it allows uninterrupted data collection from the outside of a translucent milling jar. It complements the already established in situ monitoring based on powder X-ray diffraction, which has limited accessibility to the wider research community, because it requires a synchrotron X-ray source. The Raman spectroscopy monitoring setup used in this protocol consists of an affordable, small portable spectrometer, a laser source and a Raman probe. Translucent reaction jars, most commonly made from a plastic material, enable interaction of the laser beam with the solid sample residing inside the closed reaction jar and collection of Raman-scattered photons while the ball mill is in operation. Acquired Raman spectra are analyzed using commercial or open-source software for data analysis (e.g., MATLAB, Octave, Python, R). Plotting the Raman spectra versus time enables qualitative analysis of reaction paths. This is demonstrated for an example reaction: the formation in the solid state of a cocrystal between nicotinamide and salicylic acid. A more rigorous data analysis can be achieved using multivariate analysis.

Sustainability Assessment of Mechanochemistry by Using the Twelve Principles of Green Chemistry

In recent years, mechanochemistry has been growing into a widely accepted alternative for chemical synthesis. In addition to their efficiency and practicality, mechanochemical reactions are also recognized for their sustainability. The association between mechanochemistry and Green Chemistry often originates from the solvent-free nature of most mechanochemical protocols, which can reduce waste production. However, mechanochemistry satisfies more than one of the Principles of Green Chemistry. In this Review we will present a series of examples that will clearly illustrate how mechanochemistry can significantly contribute to the fulfillment of Green Chemistry in a more holistic manner.

17O NMR spectroscopy of crystalline microporous materials

Microporous materials, containing pores and channels of similar dimensions to small molecules have a range of applications in catalysis, gas storage and separation and in drug delivery. Their complex structure, often containing different types and levels of positional, compositional and temporal disorder, makes structural characterisation challenging, with information on both long-range order and the local environment required to understand the structure-property relationships and improve the future design of functional materials. In principle, 17O NMR spectroscopy should offer an ideal tool, with oxygen atoms lining the pores of many zeolites and phosphate frameworks, playing a vital role in host-guest chemistry and reactivity, and linking the organic and inorganic components of metal-organic frameworks (MOFs). However, routine study is challenging, primarily as a result of the low natural abundance of this isotope (0.037%), exacerbated by the presence of the quadrupolar interaction that broadens the spectral lines and hinders the extraction of information. In this Perspective, we will highlight the current state-of-the-art for 17O NMR of microporous materials, focusing in particular on cost-effective and atom-efficient approaches to enrichment, the use of enrichment to explore chemical reactivity, the challenge of spectral interpretation and the approaches used to help this and the information that can be obtained from NMR spectra. Finally, we will turn to the remaining challenges, including further improving sensitivity, the high-throughput generation of multiple structural models for computational study and the possibility of in situ and in operando measurements, and give a personal perspective on how these required improvements can be used to help solve important problems in microporous materials chemistry.

Expanding the NMR toolkit for biological solids: oxygen-17 enriched Fmoc-amino acids

We report the solid-state ¹⁷O NMR parameters for five previously uncharacterized N-α-fluoren-9-yl-methoxycarbonyl-O-t-butyl (Fmoc) protected amino acids.

Unveiling the Structure and Reactivity of Fatty-Acid Based (Nano)materials Thanks to Efficient and Scalable 17O and 18O-Isotopic Labeling Schemes

Fatty acids are ubiquitous in biological systems and widely used in materials science, including for the formulation of drugs and the surface-functionalization of nanoparticles. However, important questions regarding the structure and reactivity of these molecules are still to be elucidated, including their mode of binding to certain metal cations or materials surfaces. In this context, we have developed novel, efficient, user-friendly, and cost-effective synthetic protocols based on ball-milling, for the 17O and 18O isotopic labeling of two key fatty acids which are widely used in (nano)materials science, namely stearic and oleic acid. Labeled molecules were analyzed by 1H and 13C solution NMR, IR spectroscopy, and mass spectrometry (ESI-TOF and LC-MS), as well as 17O solid state NMR (for the 17O labeled species). In both cases, the labeling procedures were scaled-up to produce up to gram quantities of 17O- or 18O-enriched molecules in just half-a-day, with very good synthetic yields (all ≥84%) and enrichment levels (up to an average of 46% per carboxylic oxygen). The 17O-labeled oleic acid was then used for the synthesis of a metal soap (Zn-oleate) and the surface-functionalization of ZnO nanoparticles (NPs), which were characterized for the first time by high-resolution 17O NMR (at 14.1 and 35.2 T). This allowed very detailed insight into (i) the coordination mode of the oleate ligand in Zn-oleate to be achieved (including information on Zn···O distances) and (ii) the mode of attachment of oleic-acid at the surface of ZnO (including novel information on its photoreactivity upon UV-irradiation). Overall, this work demonstrates the high interest of these fatty acid-enrichment protocols for understanding the structure and reactivity of a variety of functional (nano)materials systems using high resolution analyses like 17O NMR.

Higher Magnetic Fields, Finer MOF Structural Information: 17O Solid-State NMR at 35.2 T

The spectroscopic study of oxygen, a vital element in materials, physical, and life sciences, is of tremendous fundamental and practical importance. ¹⁷O solid-state NMR (SSNMR) spectroscopy has evolved into an ideal site-specific characterization tool, furnishing valuable information on the local geometric and bonding environments about chemically distinct and, in some favorable cases, crystallographically inequivalent oxygen sites. However, ¹⁷O is a challenging nucleus to study via SSNMR, as it suffers from low sensitivity and resolution, owing to the quadrupolar interaction and low ¹⁷O natural abundance. Herein, we report a significant advance in ¹⁷O SSNMR spectroscopy. ¹⁷O isotopic enrichment and the use of an ultrahigh 35.2 T magnetic field have unlocked the identification of many inequivalent carboxylate oxygen sites in the as-made and activated phases of the metal-organic framework (MOF) α-Mg₃(HCOO)₆. The subtle ¹⁷O spectral differences between the as-made and activated phases yield detailed information about host-guest interactions, including insight into nonconventional O···H-C hydrogen bonding. Such weak interactions often play key roles in the applications of MOFs, such as gas adsorption and biomedicine, and are usually difficult to study via other characterization routes. The power of performing ¹⁷O SSNMR experiments at an ultrahigh magnetic field of 35.2 T for MOF characterization is further demonstrated by examining activation of the MIL-53(Al) MOF. The sensitivity and resolution enhanced at 35.2 T allows partially and fully activated MIL-53(Al) to be unambiguously distinguished and also permits several oxygen environments in the partially activated phase to be tentatively identified. This demonstration of the very high resolution of ¹⁷O SSNMR recorded at the highest magnetic field accessible to chemists to date illustrates how a broad variety of scientists can now study oxygen-containing materials and obtain previously inaccessible fine structural information.

Mechanochemically assisted hydrolysis in the ADOR process

The ADOR (Assembly-Disassembly-Organisation-Reassembly) process for zeolites has been shown to produce a number of previously unknown frameworks inaccessible through conventional synthesis methods. Here, we present successful mechanochemically assisted hydrolysis of germanosilicate zeolite UTL leading to ADOR products under mild conditions, low amounts of solvent and in short reaction times. The expansion of zeolite synthesis into the realm of mechanochemistry opens up feasible pathways regarding the production of these materials, especially for industrial purposes, as well as an exciting application for economical enrichment of materials with the low natural abundance NMR-active isotope of oxygen, 17O. The results from mechanochemically assisted hydrolysis differ from those seen in the traditional ADOR approach: differences that can be attributed to a change in solvent availability.

Mapping the oxygen structure of γ-Al2O3 by high-field solid-state NMR spectroscopy

γ-Al₂O₃ is one of the most widely used catalysts or catalyst supports in numerous industrial catalytic processes. Understanding the structure of γ-Al₂O₃ is essential to tuning its physicochemical property, which still remains a great challenge. We report a strategy for the observation and determination of oxygen structure of γ-Al₂O₃ by using two-dimensional (2D) solid-state NMR spectroscopy at high field. 2D ¹⁷O double-quantum single-quantum homonuclear correlation NMR experiment is conducted at an ultra-high magnetic field of 35.2 T to reveal the spatial proximities between different oxygen species from the bulk to surface. Furthermore, 2D proton-detected ¹H-¹⁷O heteronuclear correlation NMR experiments allow for a rapid identification and differentiation of surface hydroxyl groups and (sub-)surface oxygen species. Our experimental results demonstrate a non-random distribution of oxygen species in γ-Al₂O₃.

γ-Al₂O₃ is widely used in catalytic processes, but understanding its detailed structure remains a challenge. The authors, using two-dimensional solid-state NMR spectroscopy at a high magnetic field, characterize the spatial proximity and connectivity between oxygen species from the bulk to the surface.

Recent directions in the solid-state NMR study of synthetic and natural calcium phosphates

Materials containing a calcium phosphate component have been the subject of much interest to NMR spectroscopists, especially in view of understanding the structure and properties of mineralized tissues like bone and teeth, and of developing synthetic biomaterials for bone regeneration. Here, we present a selection of recent developments in their structural characterization using advanced solid state NMR experiments, highlighting the level of insight which can now be accessed.

Direct 17O Isotopic Labeling of Oxides Using Mechanochemistry

While ¹⁷O NMR is increasingly being used for elucidating the structure and reactivity of complex molecular and materials systems, much effort is still required for it to become a routine analytical technique. One of the main difficulties for its development comes from the very low natural abundance of ¹⁷O (0.04%), which implies that isotopic labeling is generally needed prior to NMR analyses. However, ¹⁷O-enrichment protocols are often unattractive in terms of cost, safety, and/or practicality, even for compounds as simple as metal oxides. Here, we demonstrate how mechanochemistry can be used in a highly efficient way for the direct ¹⁷O isotopic labeling of a variety of s-, p-, and d-block oxides, which are of major interest for the preparation of functional ceramics and glasses: Li₂O, CaO, Al₂O₃, SiO₂, TiO₂, and ZrO₂. For each oxide, the enrichment step was performed under ambient conditions in less than 1 h and at low cost, which makes these synthetic approaches highly appealing in comparison to the existing literature. Using high-resolution solid-state ¹⁷O NMR and dynamic nuclear polarization, atomic-level insight into the enrichment process is achieved, especially for titania and alumina. Indeed, it was possible to demonstrate that enriched oxygen sites are present not only at the surface but also within the oxide particles. Moreover, information on the actual reactions occurring during the milling step could be obtained by ¹⁷O NMR, in terms of both their kinetics and the nature of the reactive species. Finally, it was demonstrated how high-resolution ¹⁷O NMR can be used for studying the reactivity at the interfaces between different oxide particles during ball-milling, especially in cases when X-ray diffraction techniques are uninformative. More generally, such investigations will be useful not only for producing ¹⁷O-enriched precursors efficiently but also for understanding better mechanisms of mechanochemical processes themselves.

The direct ¹⁷O enrichment of s-, p-, and d-block metal oxides is achieved with high efficiency using mechanochemistry. Atomic-level insight into the enrichment process is obtained using high-resolution solid-state ¹⁷O NMR and dynamic nuclear polarization analyses, which demonstrate that enriched oxygen sites are present both at the surface and within the oxide particles. Moreover, it is demonstrated how these labeling schemes allow the study of unique aspects of mechanochemical reactions between oxides by ¹⁷O NMR.

17O NMR studies of organic and biological molecules in aqueous solution and in the solid state

This review describes the latest developments in the field of ¹⁷O NMR spectroscopy of organic and biological molecules both in aqueous solution and in the solid state. In the first part of the review, a general theoretical description of the nuclear quadrupole relaxation process in isotropic liquids is presented at a mathematical level suitable for non-specialists. In addition to the first-order quadrupole interaction, the theory also includes additional relaxation mechanisms such as the second-order quadrupole interaction and its cross correlation with shielding anisotropy. This complete theoretical treatment allows one to assess the transverse relaxation rate (thus the line width) of NMR signals from half-integer quadrupolar nuclei in solution over the entire range of motion. On the basis of this theoretical framework, we discuss general features of quadrupole-central-transition (QCT) NMR, which is a particularly powerful method of studying biomolecules in the slow motion regime. Then we review recent advances in ¹⁷O QCT NMR studies of biological macromolecules in aqueous solution. The second part of the review is concerned with solid-state ¹⁷O NMR studies of organic and biological molecules. As a sequel to the previous review on the same subject [G. Wu, Prog. Nucl. Magn. Reson. Spectrosc. 52 (2008) 118-169], the current review provides a complete coverage of the literature published since 2008 in this area.

Isotope Labeling Reveals Fast Atomic and Molecular Exchange in Mechanochemical Milling Reactions

Using tandem in situ monitoring and isotope-labeled solids, we reveal that mechanochemical ball-milling overcomes inherently slow solid-state diffusion through continuous comminution and growth of milled particles. This process occurs with or without a net chemical reaction and also occurs between solids and liquid additives that can be practically used for highly efficient deuterium labeling of solids. The presented findings reveal a fundamental aspect of milling reactions and also delineate a methodology that should be considered in the study of mechanochemical reaction mechanisms.

Monitoring the evolution of local oxygen environments during LiCoO2 charging via ex situ17O NMR

A Li_xCoO₂ phase diagram based on NMR results in reference to different phase regions derived from the dV/dx vs. x plot.

New frontiers for solid-state NMR across the periodic table: a snapshot of modern techniques and instrumentation

Selected highlights of the recent literature on solid-state NMR of some of the lesser studied nuclei are provided. The roles of ultrahigh magnetic fields, radiofrequency pulse sequences, dynamic nuclear polarization, isotopic enrichment, and nuclear quadrupole resonance in opening up the periodic table to in-depth study are discussed.

Recent advances in solid-state nuclear magnetic resonance spectroscopy of exotic nuclei

We present a review of recent advances in solid-state nuclear magnetic resonance (SSNMR) studies of exotic nuclei. Exotic nuclei may be spin-1/2 or quadrupolar, and typically have low gyromagnetic ratios, low natural abundances, large quadrupole moments (when I > 1/2), or some combination of these properties, generally resulting in low receptivities and/or prohibitively broad line widths. Some nuclides are little studied for other reasons, also rendering them somewhat exotic. We first discuss some of the recent progress in pulse sequences and hardware development which continues to enable researchers to study new kinds of materials as well as previously unfeasible nuclei. This is followed by a survey of applications to a wide range of exotic nuclei (including e.g., ⁹Be, ²⁵Mg, ³³S, ³⁹K, ⁴³Ca, ^47/49Ti, ⁵³Cr, ⁵⁹Co, ⁶¹Ni, ⁶⁷Zn, ⁷³Ge, ⁷⁵As, ⁸⁷Sr, ¹¹⁵In, ¹¹⁹Sn, ^121/123Sb, ^135/137Ba, ^185/187Re, ²⁰⁹Bi), most of them quadrupolar. The scope of the review is the past ten years, i.e., 2007-2017.

From Synthesis of Amino Acids and Peptides to Enzymatic Catalysis: A Bottom-Up Approach in Mechanochemistry

Recently, chemical reactions induced or facilitated by mechanical energy have gained recognition in diverse areas of chemical synthesis. In particular, mechanosyntheses of amino acids and short peptides, along with their applications in catalysis, have revealed the high degree of stability of peptide bonds in environments of harsh mechanical stress. These observations quickly led to the recent interest in developing mechanochemical enzymatic reactions. Experimentally, manual grinding, ball-milling techniques, and twin-screw extrusion technology have proven valuable to convey mechanical forces into a chemical synthesis. These practices have enabled the establishment of more sustainable alternatives for chemical synthesis by reducing the use of organic solvents and waste production, thereby having a direct impact on the E-factor of the chemical process. In this Minireview, the series of events that allowed the development of mechanochemical enzymatic reactions are described from a bottom-up perspective.