Bioluminescent Antibodies for Point-of-Care Diagnostics

Development of a dual-component biosensor for rapid and sensitive detection of influenza H7 and H5 subtypes

The outbreak of highly pathogenic influenza virus subtypes, such as H7 and H5, presents a significant global health challenge, necessitating the development of rapid and sensitive diagnostic methods. In this study, we have developed a novel dual-component biosensor assembly, each component of which incorporates an antibody fused with a nano-luciferase subunit. Our results demonstrate the effectiveness of this biosensor in enabling the rapid and sensitive detection of influenza H7 and other subtypes. Additionally, we successfully applied the biosensor in paper-based assay and lateral flow assay formats, expanding its versatility and potential for field-deployable applications. Notably, we achieved effective detection of the H7N9 virus using this biosensor. Furthermore, we designed and optimized a dedicated biosensor to the sensitive detection of the influenza H5 subtype. Collectively, our findings underscore the significant potential of this dual-component biosensor assembly as a valuable and versatile tool for accurate and timely diagnosis of influenza virus infections, promising to advance the field of influenza diagnostics and contribute to outbreak management and surveillance efforts.

Development of Luminescent Biosensors for Calprotectin

Calprotectin, a metal ion-binding protein complex, plays a crucial role in the innate immune system and has gained prominence as a biomarker for various intestinal and systemic inflammatory and infectious diseases, including inflammatory bowel disease (IBD) and tuberculosis (TB). Current clinical testing methods rely on enzyme-linked immunosorbent assays (ELISAs), limiting accessibility and convenience. In this study, we introduce the Fab-Enabled Split-luciferase Calprotectin Assay (FESCA), a novel quantitative method for calprotectin measurement. FESCA utilizes two new fragment antigen binding proteins (Fabs), CP16 and CP17, that bind to different epitopes of the calprotectin complex. These Fabs are fused with split NanoLuc luciferase fragments, enabling the reconstitution of active luciferase upon binding to calprotectin either in solution or in varied immobilized assay formats. FESCA's output luminescence can be measured with standard laboratory equipment as well as consumer-grade cell phone cameras. FESCA can detect physiologically relevant calprotectin levels across various sample types, including serum, plasma, and whole blood. Notably, FESCA can detect abnormally elevated native calprotectin from TB patients. In summary, FESCA presents a convenient, low-cost, and quantitative method for assessing calprotectin levels in various biological samples, with the potential to improve the diagnosis and monitoring of inflammatory diseases, especially in at-home or point-of-care settings.

Bioluminescence Imaging of Potassium Ion Using a Sensory Luciferin and an Engineered Luciferase

Bioluminescent indicators are power tools for studying dynamic biological processes. In this study, we present the generation of novel bioluminescent indicators by modifying the luciferin molecule with an analyte-binding moiety. Specifically, we have successfully developed the first bioluminescent indicator for potassium ions (K+), which are critical electrolytes in biological systems. Our approach involved the design and synthesis of a K+-binding luciferin named potassiorin. Additionally, we engineered a luciferase enzyme called BRIPO (bioluminescent red indicator for potassium) to work synergistically with potassiorin, resulting in optimized K+-dependent bioluminescence responses. Through extensive validation in cell lines, primary neurons, and live mice, we demonstrated the efficacy of this new tool for detecting K+. Our research demonstrates an innovative concept of incorporating sensory moieties into luciferins to modulate luciferase activity. This approach has great potential for developing a wide range of bioluminescent indicators, advancing bioluminescence imaging (BLI), and enabling the study of various analytes in biological systems.

Turning Antibodies into Ratiometric Bioluminescent Sensors for Competition-Based Homogeneous Immunoassays

Here we present LUCOS (Luminescent Competition Sensor), a modular and broadly applicable bioluminescent diagnostic platform enabling the detection of both small molecules and protein biomarkers. The construction of LUCOS sensors entails the covalent and site-specific coupling of a bioluminescent sensor component to an analyte-specific antibody via protein G-mediated photoconjugation. Target detection is accomplished through intramolecular competition with a tethered analyte competitor for antibody binding. We established two variants of LUCOS: an inherent ratiometric LUCOSR variant and an intensiometric LUCOSI version, which can be used for ratiometric detection upon the addition of a split calibrator luciferase. To demonstrate the versatility of the LUCOS platform, sensors were developed for the detection of the small molecule cortisol and the protein biomarker NT-proBNP. Sensors for both targets displayed analyte-dependent changes in the emission ratio and enabled detection in the micromolar concentration range (KD,app = 16-92 μM). Furthermore, we showed that the response range of the LUCOS sensor can be adjusted by attenuating the affinity of the tethered NT-proBNP competitor, which enabled detection in the nanomolar concentration range (KD,app = 317 ± 26 nM). Overall, the LUCOS platform offers a highly versatile and easy method to convert commercially available monoclonal antibodies into bioluminescent biosensors that provide a homogeneous alternative for the competitive immunoassay.

Bioluminescence Imaging of Potassium Ion Using a Sensory Luciferin and an Engineered Luciferase

Bioluminescent indicators are power tools for studying dynamic biological processes. In this study, we present the generation of novel bioluminescent indicators by modifying the luciferin molecule with an analyte-binding moiety. Specifically, we have successfully developed the first bioluminescent indicator for potassium ions (K+), which are critical electrolytes in biological systems. Our approach involved the design and synthesis of a K+-binding luciferin named potassiorin. Additionally, we engineered a luciferase enzyme called BRIPO (bioluminescent red indicator for potassium) to work synergistically with potassiorin, resulting in optimized K+-dependent bioluminescence responses. Through extensive validation in cell lines, primary neurons, and live mice, we demonstrated the efficacy of this new tool for detecting K+. Our research demonstrates an innovative concept of incorporating sensory moieties into luciferins to modulate luciferase activity. This approach has great potential for developing a wide range of bioluminescent indicators, advancing bioluminescence imaging (BLI), and enabling the study of various analytes in biological systems.

Chimeric Protein Switch Biosensors

Rapid detection of protein and small-molecule analytes is a valuable technique across multiple disciplines, but most in vitro testing of biological or environmental samples requires long, laborious processes and trained personnel in laboratory settings, leading to long wait times for results and high expenses. Fusion of recognition with reporter elements has been introduced to detection methods such as enzyme-linked immunoassays (ELISA), with enzyme-conjugated secondary antibodies removing one of the many incubation and wash steps. Chimeric protein switch biosensors go further and provide a platform for homogenous mix-and-read assays where long wash and incubation steps are eradicated from the process. Chimeric protein switch biosensors consist of an enzyme switch (the reporter) coupled to a recognition element, where binding of the analyte results in switching the activity of the reporter enzyme on or off. Several chimeric protein switch biosensors have successfully been developed for analytes ranging from small molecule drugs to large protein biomarkers. There are two main formats of chimeric protein switch biosensor developed, one-component and multi-component, and these formats exhibit unique advantages and disadvantages. Genetically fusing a recognition protein to the enzyme switch has many advantages in the production and performance of the biosensor. A range of immune and synthetic binding proteins have been developed as alternatives to antibodies, including antibody mimetics or antibody fragments. These are mainly small, easily manipulated proteins and can be genetically fused to a reporter for recombinant expression or manipulated to allow chemical fusion. Here, aspects of chimeric protein switch biosensors will be reviewed with a comparison of different classes of recognition elements and switching mechanisms.

A Semisynthetic Bioluminescence Sensor for Ratiometric Imaging of Metal Ions In Vivo Using DNAzymes Conjugated to An Engineered Nano-Luciferase

DNA-based probes have gained significant attention as versatile tools for biochemical analysis, benefiting from their programmability and biocompatibility. However, most existing DNA-based probes rely on fluorescence as the signal output, which can be problematic due to issues like autofluorescence and scattering when applied in complex biological materials such as living cells or tissues. Herein, we report the development of bioluminescent nucleic acid (bioLUNA) sensors that offer laser excitation-independent and ratiometric imaging of the target in vivo. The system is based on computational modelling and mutagenesis investigations of a genetic fusion between circular permutated Nano-luciferase (NLuc) and HaloTag, enabling the conjugation of the protein with a DNAzyme. In the presence of Zn2+ , the DNAzyme sensor releases the fluorophore-labelled strand, leading to a reduction in bioluminescent resonance energy transfer (BRET) between the luciferase and fluorophore. Consequently, this process induces ratiometric changes in the bioluminescent signal. We demonstrated that this bioLUNA sensor enabled imaging of both exogenous Zn2+ in vivo and endogenous Zn2+ efflux in normal epithelial prostate and prostate tumors. This work expands the DNAzyme sensors to using bioluminescence and thus has enriched the toolbox of nucleic acid sensors for a broad range of biomedical applications.

A Reaction-Based Ratiometric Bioluminescent Platform for Point-of-Care and Quantitative Detection Using a Smartphone

Fluorescent probes have emerged as powerful tools for the detection of different analytes by virtue of structural tenability. However, the requirement of an excitation source largely hinders their applicability in point-of-care detection, as well as causing autofluorescence interference in complex samples. Herein, based on bioluminescence resonance energy transfer (BRET), we developed a reaction-based ratiometric bioluminescent platform, which allows the excitation-free detection of analytes. The platform has a modular design consisting of a NanoLuc-HaloTag fusion as an energy donor, to which a synthetic fluorescent probe is bioorthogonally labeled as recognition moiety and energy acceptor. Once activated by the target, the fluorescent probe can be excited by NanoLuc to generate a remarkable BRET signal, resulting in obvious color changes of luminescence, which can be easily recorded and quantitatively analyzed by a smartphone. As a proof of concept, a fluorescent probe for HOCl was synthesized to construct the bioluminescent system. Results demonstrated the system showed a constant blue/red emission ratio which is independent to the signal intensity, allowing the quantification of HOCl concentration with high sensitivity (limit of detection (LOD) = 13 nM) and accuracy. Given the universality, this reaction-based bioluminescent platform holds great potential for point-of-care and quantitative detection of reactive species.

Recent progress in homogeneous immunosensors based on fluorescence or bioluminescence using antibody engineering

Homogeneous immunosensors integrate the advantages of both biosensors and immunoassays; they include speed, high sensitivity, and accuracy. They have been developed rapidly in the past few years and offer a cost-effective alternative technology with rapidity, sensitivity, and user-friendliness, which has been applied in a wide variety of applications. This review introduces the current directions of immunosensor development, focusing on fluorescent and bioluminescent immunosensors and highlighting the advantages, improvements, and key approaches to overcome the limitations of each.

Reshaping de Novo Protein Switches into Bioresponsive Materials for Biomarker, Toxin, and Viral Detection

De novo designed protein switches are powerful tools to specifically and sensitively detect diverse targets with simple chemiluminescent readouts. Finding an appropriate material host for de novo designed protein switches without altering their thermodynamics while preserving their intrinsic stability over time would enable the development of a variety of sensing formats to monitor exposure to pathogens, toxins, and for disease diagnosis. Here, a de novo protein-biopolymer hybrid that maintains the detection capabilities induced by the conformational change of the incorporated proteins in response to analytes of interest is generated in multiple, shelf-stable material formats without the need of refrigerated storage conditions. A set of functional demonstrator devices including personal protective equipment such as masks and laboratory gloves, free-standing films, air quality monitors, and wearable devices is presented to illustrate the versatility of the approach. Such formats are designed to be responsive to human epidermal growth factor receptor (HER2), anti-hepatitis B (HBV) antibodies, Botulinum neurotoxin B (BoNT/B), and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This combination of form and function offers wide opportunities for ubiquitous sensing in multiple environments by enabling a large class of bio-responsive interfaces of broad utility.

Multiplex Identification of Post-Translational Modifications at Point-of-Care by Deep Learning-Assisted Hydrogel Sensors

Multiplex detection of protein post-translational modifications (PTMs), especially at point-of-care, is of great significance in cancer diagnosis. Herein, we report a machine learning-assisted photonic crystal hydrogel (PCH) sensor for multiplex detection of PTMs. With closely-related PCH sensors microfabricated on a single chip, our design achieved not only rapid screening of PTMs at specific protein sites by using only naked eyes/cellphone, but also the feasibility of real-time monitoring of phosphorylation reactions. By taking advantage of multiplex sensor chips and a neural network algorithm, accurate prediction of PTMs by both their types and concentrations was enabled. This approach was ultimately used to detect and differentiate up/down regulation of different phosphorylation sites within the same protein in live mammalian cells. Our developed method thus holds potential for POC identification of various PTMs in early-stage diagnosis of protein-related diseases.

Creating a Thermostable β-Glucuronidase Switch for Homogeneous Immunoassay by Disruption of Conserved Salt Bridges at Diagonal Interfaces

Escherichia coli β-glucuronidase (GUS) has been used as a reporter enzyme in molecular biology and engineered as an enzyme switch for the development of homogeneous biosensors. In this study, we developed a thermostable GUS enzyme switch based on the thermostable GUS mutant TR3337 by disrupting a conserved salt bridge (H514-E523) between the diagonal subunits of its homotetramer. A combinatorial library (240 variants) was screened using a novel high-throughput strategy, which led to the identification of mutant DLW (H514D/M516L/Y517W) as a functional enzyme switch in a caffeine-recognizing immunosensor. Molecular dynamics simulations were performed to predict the topology change around position 514, and a side-chain flip of D514 (repulsion with E523) was observed in the DLW mutant. Up to 1.8-fold of signal-to-background ratio was confirmed when measured at up to 45 °C, thereby highlighting the DLW mutant as a versatile tool for developing thermostable immunosensors for in vitro and in cellulo applications.

Direct Minisci-Type C–H Amidation of Purine Bases

A method for the C–H carboxyamidation of purines has been developed that is capable of directly installing primary, secondary, and tertiary amides. Previous Minisci-type investigations on purines were limited to alkylations and arylations. Herein, we present the first method for the direct C–H amidation of a wide range of purines: xanthine, guanine, and adenine structures, including guanosine- and adenosine-type nucleosides. The Minisci-type reaction is also metal-free, cheap, operationally simple, scalable, and applicable to late-stage functionalizations of biologically important molecules.

Development of a rapid, simple, and sensitive point-of-care technology platform utilizing ternary NanoLuc

Point-of-care tests are highly valuable in providing fast results for medical decisions for greater flexibility in patient care. Many diagnostic tests, such as ELISAs, that are commonly used within clinical laboratory settings require trained technicians, laborious workflows, and complex instrumentation hindering their translation into point-of-care applications. Herein, we demonstrate the use of a homogeneous, bioluminescent-based, split reporter platform that enables a simple, sensitive, and rapid method for analyte detection in clinical samples. We developed this point-of-care application using an optimized ternary, split-NanoLuc luciferase reporter system that consists of two small reporter peptides added as appendages to analyte-specific affinity reagents. A bright, stable bioluminescent signal is generated as the affinity reagents bind to the analyte, allowing for proximity-induced complementation between the two reporter peptides and the polypeptide protein, in addition to the furimazine substrate. Through lyophilization of the stabilized reporter system with the formulated substrate, we demonstrate a shelf-stable, all-in-one, add-and-read analyte-detection system for use in complex sample matrices at the point-of-care. We highlight the modularity of this platform using two distinct SARS-CoV-2 model systems: SARS-CoV-2 N-antigen detection for active infections and anti-SARS-CoV-2 antibodies for immunity status detection using chemically conjugated or genetically fused affinity reagents, respectively. This technology provides a simple and standardized method to develop rapid, robust, and sensitive analyte-detection assays with flexible assay formatting making this an ideal platform for research, clinical laboratory, as well as point-of-care applications utilizing a simple handheld luminometer.

Biolum' RGB: A Low-Cost, Versatile, and Sensitive Bioluminescence Imaging Instrument for a Broad Range of Users

Luminometer and imaging systems are used to detect and quantify low light produced by a broad range of bioluminescent proteins. Despite their everyday use in research, such instruments are costly and lack the flexibility to accommodate the variety of bioluminescence experiment formats that may require top or bottom signal acquisition, high or medium sensitivity, or multiple wavelength detection. To address the growing need for versatile technologies, we developed a highly customizable bioluminescence imager called Biolum' RGB that uses a consumer color digital camera with a high-aperture lens mounted at the bottom or top of a 3D-printed dark chamber and can quantify bioluminescence emission from cells grown in 384-well microplates and Petri dishes. Taking advantage of RGB detectors, Biolum' RGB can distinguish spectral signatures from various bioluminescence probes and quantify bioluminescence resonant energy transfer occurring during protein-protein interaction events. Although Biolum' RGB can be used with any smartphone, in particular for low bioluminescence signals, we recommend the use of recent digital cameras which offer better sensitivity and high signal/noise ratio. Altogether, Biolum' RGB combines the benefits of a plate reader and imager while providing better image resolution and faster acquisition speed, and as such, it offers an exciting alternative for any laboratory looking for a versatile, low-cost bioluminescence imaging instrument.

Engineered Amber-Emitting Nano Luciferase and Its Use for Immunobioluminescence Imaging In Vivo

The NanoLuc luciferase (NLuc) and its furimazine (FRZ) substrate have revolutionized bioluminescence (BL) assays and imaging. However, the use of the NLuc-FRZ luciferase-luciferin pair for mammalian tissue imaging is hindered by the low tissue penetration of the emitting blue photons. Here, we present the development of an NLuc mutant, QLuc, which catalyzes the oxidation of a synthetic QTZ luciferin for bright and red-shifted emission peaking at ∼585 nm. Compared to other small single-domain NLuc mutants, this amber-light-emitting luciferase exhibited improved performance for imaging deep-tissue targets in live mice. Leveraging this novel bioluminescent reporter, we further pursued in vivo immunobioluminescence imaging (immunoBLI), which used a fusion protein of a single-chain variable antibody fragment (scFv) and QLuc for molecular imaging of tumor-associated antigens in a xenograft mouse model. As one of the most red-shifted NLuc variants, we expect QLuc to find broad applications in noninvasive mammalian imaging. Moreover, the immunoBLI method complements immunofluorescence imaging and immuno-positron emission tomography (immunoPET), serving as a convenient and nonradioactive molecular imaging tool for animal models in basic and preclinical research.

A Single-Component Luminescent Biosensor for the SARS-CoV-2 Spike Protein

Many existing protein detection strategies depend on highly functionalized antibody reagents. A simpler and easier to produce class of detection reagent is highly desirable. We designed a single-component, recombinant, luminescent biosensor that can be expressed in laboratory strains of Escherichia coli and Saccharomyces cerevisiae. This biosensor is deployed in multiple homogeneous and immobilized assay formats to detect recombinant SARS-CoV-2 spike antigen and cultured virus. The chemiluminescent signal generated facilitates detection by an unaugmented cell phone camera. Binding-activated tandem split-enzyme (BAT) biosensors may serve as a useful template for diagnostics and reagents that detect SARS-CoV-2 antigens and other proteins of interest.

A single-component luminescent biosensor for the SARS-CoV-2 spike protein.. [PMID: 35734091 PMCID: PMC9216720 DOI: 10.1101/2022.06.15.496006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Many existing protein detection strategies depend on highly functionalized antibody reagents. A simpler and easier to produce class of detection reagent is highly desirable. We designed a single-component, recombinant, luminescent biosensor that can be expressed in laboratory strains of E. coli and S. cerevisiae. This biosensor is deployed in multiple homogenous and immobilized assay formats to detect recombinant SARS-CoV-2 spike antigen and cultured virus. The chemiluminescent signal generated facilitates detection by an un-augmented cell phone camera. Binding Activated Tandem split-enzyme (BAT) biosensors may serve as a useful template for diagnostics and reagents that detect SARS-CoV-2 antigens and other proteins of interest.

Technologies for Frugal and Sensitive Point-of-Care Immunoassays

Immunoassays are a powerful tool for sensitive and quantitative analysis of a wide range of biomolecular analytes in the clinic and in research laboratories. However, enzyme-linked immunosorbent assay (ELISA)-the gold-standard assay-requires significant user intervention, time, and clinical resources, making its deployment at the point-of-care (POC) impractical. Researchers have made great strides toward democratizing access to clinical quality immunoassays at the POC and at an affordable price. In this review, we first summarize the commercially available options that offer high performance, albeit at high cost. Next, we describe strategies for the development of frugal POC assays that repurpose consumer electronics and smartphones for the quantitative detection of analytes. Finally, we discuss innovative assay formats that enable highly sensitive analysis in the field with simple instrumentation.

"Ready-to-use" immunosensor for the detection of small molecules with fast readout

Immunoassays are commonly used methods for detection of small molecules that typically require numerous steps of the labeling between immune-recognition reagents and tracers, immobilization and recurrent washing, making them time consuming and difficult to adapt into point of care formats. Here we describe a "ready-to-use" homogeneous competitive immunosensor with an assay time of 10 min that is based exclusively on recombinant reagents. The signal is produced when the split fragments of the nano luciferase (Nluc) are brought together by the interaction of a heavy chain only variable domain (VHH) with a peptidomimetic of the target small molecule. A VHH to 2,4-dichlorophenoxyacetic acid (2,4-D) was used to isolated the peptidomimetic (NGFFEPWQVVYV) from phage display libraries using six panning conditions. Then the peptidomimetic and VHH were fused with the larger (LgN) and smaller piece (SmN) of split fragments of Nluc, respectively. In order to optimize the signal and sensitivity of the immunosensor, we explored the effects of the spacer between the peptidomimetic and LgN, the copy number of peptidomimetics, and the spacer between SmN and VHH, generating 24 combinations that allowed to conclude on their respective roles. Eventually, the developed "ready-to-use" immunosensor performed excellent signal-to-noise ratio and sensitivity, and could be applied to the detection of 2,4-D in real samples. Meanwhile, the immunosensor totally realizes labeling-free, immobilization-free and washing-free, also can be produced in a highly cost effective way.

Protein-Induced Fluorescence Enhancement and Quenching in a Homogeneous DNA-Based Assay for Rapid Detection of Small-Molecule Drugs in Human Plasma

Homogeneous assays for determining the concentration of small molecules in biological fluids are of importance for monitoring blood levels of critical drugs in patients. We have developed a strand displacement competition assay for the drugs dabigatran, methotrexate, and linezolid, which allows detection and determination of the concentration of the drugs in plasma; however, a surprising kinetic behavior of the assay was observed with an initial rapid change in apparent FRET values. We found that protein-induced fluorescent enhancement or quenching (PIFE/Q) caused the initial change in fluorescence within the first minute after addition of protein, which could be exploited to construct assays for concentration determination within minutes in the low nanomolar range in plasma. A kinetic model for the assay was established, and when taking the new finding into account, the in silico simulations were in good agreement with the experimentally observed results. Utilizing these findings, a simpler assay was constructed for detection of dabigatran, which allowed for detection within minutes without any time dependencies.

Emerging biosensing and transducing techniques for potential applications in point-of-care diagnostics

With the deepening of our understanding in life science, molecular biology, nanotechnology, optics, electrochemistry and other areas, an increasing number of biosensor design strategies have emerged in recent years, capable of providing potential practical applications for point-of-care (POC) diagnosis in various human diseases. Compared to conventional biosensors, the latest POC biosensor research aims at improving sensor precision, cost-effectiveness and time-consumption, as well as the development of versatile detection strategies to achieve multiplexed analyte detection in a single device and enable rapid diagnosis and high-throughput screening. In this review, various intriguing strategies in the recognition and transduction of POC (from 2018 to 2021) are described in light of recent advances in CRISPR technology, electrochemical biosensing, and optical- or spectra-based biosensing. From the perspective of promoting emerging bioanalytical tools into practical POC detecting and diagnostic applications, we have summarized key advances made in this field in recent years and presented our own perspectives on future POC development and challenges.

Engineering and exploiting synthetic allostery of NanoLuc luciferase

Allostery enables proteins to interconvert different biochemical signals and form complex metabolic and signaling networks. We hypothesize that circular permutation of proteins increases the probability of functional coupling of new N- and C- termini with the protein's active center through increased local structural disorder. To test this we construct a synthetically allosteric version of circular permutated NanoLuc luciferase that can be activated through ligand-induced intramolecular non-covalent cyclisation. This switch module is tolerant of the structure of binding domains and their ligands, and can be used to create biosensors of proteins and small molecules. The developed biosensors covers a range of emission wavelengths and displays sensitivity as low as 50pM and dynamic range as high as 16-fold and could quantify their cognate ligand in human fluids. We apply hydrogen exchange kinetic mass spectroscopy to analyze time resolved structural changes in the developed biosensors and observe ligand-mediated folding of newly created termini.

Paving the way towards continuous biosensing by implementing affinity-based nanoswitches on state-dependent readout platforms

Combining affinity-based nanoswitches with state-dependent readout platforms allows for continuous biosensing and acquisition of real-time information about biochemical processes occurring in the environment of interest.

First thermostable CLIP-tag by rational design applied to an archaeal O-alkyl-guanine-DNA-alkyl-transferase

Self-labelling protein tags (SLPs) are resourceful tools that revolutionized sensor imaging, having the versatile ability of being genetically fused with any protein of interest and undergoing activation with alternative probes specifically designed for each variant (namely, SNAP-tag, CLIP-tag and Halo-tag). Commercially available SLPs are highly useful in studying molecular aspects of mesophilic organisms, while they fail in characterizing model organisms that thrive in harsh conditions. By applying an integrated computational and structural approach, we designed a engineered variant of the alkylguanine-DNA-alkyl-transferase (OGT) from the hyper-thermophilic archaeon Saccharolobus solfataricus (SsOGT), with no DNA-binding activity, able to covalently react with O⁶-benzyl-cytosine (BC-) derivatives, obtaining the first thermostable CLIP-tag, named SsOGT-MC⁸.

The presented construct is able to recognize and to covalently bind BC- substrates with a marked specificity, displaying a very low activity on orthogonal benzyl-guanine (BG-) substrate and showing a remarkable thermal stability that broadens the applicability of SLPs. The rational mutagenesis that, starting from SsOGT, led to the production of SsOGT-MC⁸ was first evaluated by structural predictions to precisely design the chimeric construct, by mutating specific residues involved in protein stability and substrate recognition. The final construct was further validated by biochemical characterization and X-ray crystallography, allowing us to present here the first structural model of a CLIP-tag establishing the molecular determinants of its activity, as well as proposing a general approach for the rational engineering of any O⁶-alkylguanine-DNA-alkyl-transferase turning it into a SNAP- and a CLIP-tag variant.

Long-Lasting Luminol Chemiluminescence Emission with 1,10-Phenanthroline-2,9-dicarboxylic Acid Copper(II) Complex on Paper

As most of the known systems are flashtype, long-lasting chemiluminescence (CL) emissions are extremely needed for the application of cold light sources, accurate CL quantitative analysis, and biological mapping. In this work, the flashtype system of luminol was altered to a long lasting CL system just because of the paper substrate. The Cu(II)-based organic complex was loaded on the paper surface, which can trigger luminol-H₂O₂ to produce a long lasting CL emission for over 30 min. By using 1,10-phenanthroline-2,9-dicarboxylic acid (PDA) as the ligand, a hexacoordinated Cu(II)-based organic complex was synthesized by the simple freeze-drying method. It is interesting that the complex morphology can be controlled by adding different amounts of water in the synthesizing procedure. The complex with a certain size can be definitely trapped in the pores of the cellulose. Then, slow diffusion, which can be attributed to the long lasting CL emission, was produced. With the high catalytic activity of the complex, reactive oxygen species from H₂O₂ was generated and was responsible for the high CL intensity. By using the paper substrate, the flash-type luminol system can be easily transferred to the long-duration CL system without any extra reagent. This long-lasting emission system was used for hydrogen sulfide detection by the CL imaging method. This paper-based sensor has great potential for CL imaging in the clinical field in the future.

Engineering with NanoLuc: a playground for the development of bioluminescent protein switches and sensors

The small engineered luciferase NanoLuc has rapidly become a powerful tool in the fields of biochemistry, chemical biology, and cell biology due to its exceptional brightness and stability. The continuously expanding NanoLuc toolbox has been employed in applications ranging from biosensors to molecular and cellular imaging, and currently includes split complementation variants, engineering techniques for spectral tuning, and bioluminescence resonance energy transfer-based concepts. In this review, we provide an overview of state-of-the-art NanoLuc-based sensors and switches with a focus on the underlying protein engineering approaches. We discuss the advantages and disadvantages of various strategies with respect to sensor sensitivity, modularity, and dynamic range of the sensor and provide a perspective on future strategies and applications.

A plug-and-play platform of ratiometric bioluminescent sensors for homogeneous immunoassays

Heterogeneous immunoassays such as ELISA have become indispensable in modern bioanalysis, yet translation into point-of-care assays is hindered by their dependence on external calibration and multiple washing and incubation steps. Here, we introduce RAPPID (Ratiometric Plug-and-Play Immunodiagnostics), a mix-and-measure homogeneous immunoassay platform that combines highly specific antibody-based detection with a ratiometric bioluminescent readout. The concept entails analyte-induced complementation of split NanoLuc luciferase fragments, photoconjugated to an antibody sandwich pair via protein G adapters. Introduction of a calibrator luciferase provides a robust ratiometric signal that allows direct in-sample calibration and quantitative measurements in complex media such as blood plasma. We developed RAPPID sensors that allow low-picomolar detection of several protein biomarkers, anti-drug antibodies, therapeutic antibodies, and both SARS-CoV-2 spike protein and anti-SARS-CoV-2 antibodies. With its easy-to-implement standardized workflow, RAPPID provides an attractive, fast, and low-cost alternative to traditional immunoassays, in an academic setting, in clinical laboratories, and for point-of-care applications.

Many current immunoassays require multiple washing, incubation and optimization steps. Here the authors present Ratiometric Plug-and-Play Immunodiagnostics (RAPPID), a generic assay platform that uses ratiometric bioluminescent detection to allow sandwich immunoassays to be performed directly in solution.

BRET Q-Body: A Ratiometric Quench-based Bioluminescent Immunosensor Made of Luciferase-Dye-Antibody Fusion with Enhanced Response

A quenchbody (Q-body) is an immunosensor comprising an antibody fragment containing an antigen-binding site that is site-specifically labeled with a fluorescent dye. The fluorescent dye of a Q-body is quenched in the absence of an antigen; however, its fluorescence recovers in the presence of an antigen, offering simple and rapid systems for antigen detection. In this study, we fused luciferase NanoLuc to a Q-body to construct a new immunosensor termed the "BRET Q-body" that can detect antigens based on the bioluminescence resonance energy transfer (BRET) principle. The resulting BRET Q-bodies for an osteocalcin peptide that emit three different emission colors could detect an antigen without the requirement of an external light source, based on ratiometric detection and color change with two wavelengths for the luciferase and fluorophore. Furthermore, the BRET Q-body produced unexpectedly higher responses up to 12-fold because of the increased BRET efficiency, probably associated with antigen-dependent dye movement. Thus, the BRET Q-body is a useful biosensor as a core of point-of-care tests.

Optical biosensors - Illuminating the path to personalized drug dosing

Optical biosensors are low-cost, sensitive and portable devices that are poised to revolutionize the medical industry. Healthcare monitoring has already been transformed by such devices, with notable recent applications including heart rate monitoring in smartwatches and COVID-19 lateral flow diagnostic test kits. The commercial success and impact of existing optical sensors has galvanized research in expanding its application in numerous disciplines. Drug detection and monitoring seeks to benefit from the fast-approaching wave of optical biosensors, with diverse applications ranging from illicit drug testing, clinical trials, monitoring in advanced drug delivery systems and personalized drug dosing. The latter has the potential to significantly improve patients' lives by minimizing toxicity and maximizing efficacy. To achieve this, the patient's serum drug levels must be frequently measured. Yet, the current method of obtaining such information, namely therapeutic drug monitoring (TDM), is not routinely practiced as it is invasive, expensive, time-consuming and skilled labor-intensive. Certainly, optical sensors possess the capabilities to challenge this convention. This review explores the current state of optical biosensors in personalized dosing with special emphasis on TDM, and provides an appraisal on recent strategies. The strengths and challenges of optical biosensors are critically evaluated, before concluding with perspectives on the future direction of these sensors.

Precise tetrafunctional streptavidin bioconjugates towards multifaceted drug delivery systems

The preparation of precise macromolecules with multiple functionalities remains a challenge in drug delivery. Here, a method to prepare stoichiometrically precise tetrafunctional streptavidin conjugates is presented with an exemplary structure combining exactly one fluorescent label, one cell targeting group, one nucleus penetrating peptide and one drug molecule.

Capillary Microfluidics for Monitoring Medication Adherence

Medication adherence is a medical and societal issue worldwide, with approximately half of patients failing to adhere to prescribed treatments. The goal of this Minireview is to examine how recent work on microfluidics for point-of-care diagnostics may be used to enhance adherence to medication. It specifically focuses on capillary microfluidics since these devices are self-powered, easy to use, and well established for diagnostics and drug monitoring. Considering that an improvement in medication adherence can have a much larger effect than the development of new medical treatments, it is long overdue for the research communities working in chemistry, biology, pharmacology, and material sciences to consider developing technologies to enhance medication adherence. For these reasons, this Minireview is not meant to be exhaustive but rather to provide a quick starting point for researchers interested in joining this complex but intriguing and exciting field of research.

Ratiometric Bioluminescent Indicator for Simple and Rapid Diagnosis of Bilirubin

Bilirubin in human blood is highly important as a general index of one's physical condition because its concentration changes under the influence of several diseases. In particular, in newborns, jaundice is one of the most common diseases involving unconjugated bilirubin (UCBR), causing serious symptoms such as nuclear jaundice and deafness. Therefore, a frequent measurement of the UCBR levels in the blood is important. Here, we report a ratiometric bioluminescent indicator, BABI (bilirubin assessment with a bioluminescent indicator), that changes the emission color from blue to green depending on the UCBR concentration in a sample. Owing to the use of a bioluminescence signal that has a higher signal-to-noise ratio than the absorption and fluorescence signal, BABI enables highly sensitive and quantitative detection of UCBR for small blood samples using a smartphone camera. The establishment of a UCBR measurement assay using BABI provides the possibility of a simple and rapid method for blood-based diagnosis using bioluminescent indicators and a versatile mobile device.

Tandem reassembly of split luciferase-DNA chimeras for bioluminescent detection of attomolar circulating microRNAs using a smartphone

Detection of dysregulated circulating microRNAs (miRNAs) in human biofluids is a fundamental ability to determine tumor occurrence and metastasis in a minimally invasive fashion. However, the requirements for sophisticated instruments and professional personnel impede the translation of miRNA tests into routine clinical diagnostics, especially for resource-limited regions. Herein, we developed a DNA-guided bioluminescence strategy for the detection of circulating miRNAs. In this strategy, a pair of split luciferase-DNA chimeras was constructed and integrated into the miRNA-triggered rolling circle amplification (RCA) process. The tandem reassembly of split luciferase-DNA chimeras on the RCA products elicited a turn-on bioluminescence response with ultrahigh signal-to-background (S/B) ratio. This strategy enabled smartphone-based assays for different miRNAs with attomolar sensitivity and single-base specificity, as demonstrated here for miR-21. miR-148b, and cel-miR-39. Further application of our approach to the clinical serum samples realized identification of dysregulated miR-21 and miR-148b in the lung cancer patients, showing a satisfactory agreement with the control assays performed with quantitative reverse transcription polymerase chain reaction (qRT-PCR). Therefore, the developed method possesses the benefits of high performance and reliability, offering a potential tool for implementing miRNA-based diagnosis in point-of-care (POC) settings.

Resonance Energy Transfer-Based Biosensors for Point-of-Need Diagnosis-Progress and Perspectives

The demand for point-of-need (PON) diagnostics for clinical and other applications is continuing to grow. Much of this demand is currently serviced by biosensors, which combine a bioanalytical sensing element with a transducing device that reports results to the user. Ideally, such devices are easy to use and do not require special skills of the end user. Application-dependent, PON devices may need to be capable of measuring low levels of analytes very rapidly, and it is often helpful if they are also portable. To date, only two transduction modalities, colorimetric lateral flow immunoassays (LFIs) and electrochemical assays, fully meet these requirements and have been widely adopted at the point-of-need. These modalities are either non-quantitative (LFIs) or highly analyte-specific (electrochemical glucose meters), therefore requiring considerable modification if they are to be co-opted for measuring other biomarkers. Förster Resonance Energy Transfer (RET)-based biosensors incorporate a quantitative and highly versatile transduction modality that has been extensively used in biomedical research laboratories. RET-biosensors have not yet been applied at the point-of-need despite its advantages over other established techniques. In this review, we explore and discuss recent developments in the translation of RET-biosensors for PON diagnoses, including their potential benefits and drawbacks.

Recent advances in visual detection for cancer biomarkers and infectious pathogens

It is an urgency to detect infectious pathogens or cancer biomarkers using rapid, simple, convenient and cost-effective methods in complex biological samples. Many existing approaches (traditional virus culture, ELISA or PCR) for the pathogen and biomarker assays face several challenges in the clinical applications that require lengthy time, sophisticated sample pre-treatment and expensive instruments. Due to the simple and rapid detection manner as well as no requirement of expensive equipment, many visual detection methods have been considered to resolve the aforementioned problems. Meanwhile, various new materials and colorimetric/fluorescent methods have been tried to construct new biosensors for infectious pathogens and biomarkers. However, the recent progress of these aspects is rarely reviewed, especially in terms of integration of new materials, microdevice and detection mechanism into the visual detection systems. Herein, we provide a broad field of view to discuss the recent progress in the visual detection of infectious pathogens and cancer biomarkers along with the detection mechanism, new materials, novel detection methods, special targets as well as multi-functional microdevices and systems. The novel visual approaches for the infectious pathogens and biomarkers, such as bioluminescence resonance energy transfer (BRET), metal-induced metallization and clustered regularly interspaced short palindromic repeats (CRISPR)-based biosensors, are discussed. Additionally, recent advancements in visual assays utilizing various new materials for proteins, nucleic acids, viruses, exosomes and small molecules are comprehensively reviewed. Future perspectives on the visual sensing systems for infectious pathogens and cancers are also proposed.

Applications of bioluminescence in biotechnology and beyond

Bioluminescent probes have hugely benefited from the input of synthetic chemistry and protein engineering. Here we review the latest applications of these probes in biotechnology and beyond, with an eye on current limitations and future directions.

Linker Engineering in the Context of Synthetic Protein Switches and Sensors

Linkers play critical roles in the construction of synthetic protein switches and sensors as they functionally couple a receptor with an actuator. With an increasing number of molecular toolboxes and experimental strategies becoming available that can be applied to engineer protein switches and sensors with tailored response functions, optimising the connecting linkers remains an idiosyncratic and empiric process. This review aims to provide an in-depth analysis of linker motifs, the biophysical properties they confer, and how they impact the performance of synthetic protein switches and sensors while identifying trends, mechanisms, and strategies that underlie the most potent switches and sensors.

Coelenterazine-Dependent Luciferases as a Powerful Analytical Tool for Research and Biomedical Applications

: The functioning of bioluminescent systems in most of the known marine organisms is based on the oxidation reaction of the same substrate-coelenterazine (CTZ), catalyzed by luciferase. Despite the diversity in structures and the functioning mechanisms, these enzymes can be united into a common group called CTZ-dependent luciferases. Among these, there are two sharply different types of the system organization-Ca2+-regulated photoproteins and luciferases themselves that function in accordance with the classical enzyme-substrate kinetics. Along with deep and comprehensive fundamental research on these systems, approaches and methods of their practical use as highly sensitive reporters in analytics have been developed. The research aiming at the creation of artificial luciferases and synthetic CTZ analogues with new unique properties has led to the development of new experimental analytical methods based on them. The commercial availability of many ready-to-use assay systems based on CTZ-dependent luciferases is also important when choosing them by first-time-users. The development of analytical methods based on these bioluminescent systems is currently booming. The bioluminescent systems under consideration were successfully applied in various biological research areas, which confirms them to be a powerful analytical tool. In this review, we consider the main directions, results, and achievements in research involving these luciferases.

Thread-Based Bioluminescent Sensor for Detecting Multiple Antibodies in a Single Drop of Whole Blood

Antibodies are important biomarkers in clinical diagnostics in addition to being increasingly used for therapeutic purposes. Although numerous methods for their detection and quantification exist, they predominantly require benchtop instruments operated by specialists. To enable the detection of antibodies at point-of-care (POC), the development of simple and rapid assay methods independent of laboratory equipment is of high relevance. In this study, we demonstrate microfluidic thread-based analytical devices (μTADs) as a new platform for antibody detection by means of bioluminescence resonance energy-transfer (BRET) switching sensor proteins. The devices consist of vertically assembled layers including a blood separation membrane and a plastic film with a sewn-in cotton thread, onto which the BRET sensor proteins together with the substrate furimazine have been predeposited. In contrast to intensity-based signaling, the BRET mechanism enables time-independent, ratiometric readout of bioluminescence signals with a digital camera in a darkroom or a smartphone camera with a 3D-printed lens adapter. The device design allows spatially separated deposition of multiple bioluminescent proteins on a single sewn thread, enabling quantification of multiple antibodies in 5 μL of whole blood within 5 min. The bioluminescence response is independent of the applied sample volume within the range of 5-15 μL. Therefore, μTADs in combination with BRET-based sensor proteins represent user-friendly analytical tools for POC quantification of antibodies without any laboratory equipment in a finger prick (5 μL) of whole blood.

Size-selective molecular recognition based on a confined DNA molecular sieve using cavity-tunable framework nucleic acids

Size selectivity is an important mechanism for molecular recognition based on the size difference between targets and non-targets. However, rational design of an artificial size-selective molecular recognition system for biological targets in living cells remains challenging. Herein, we construct a DNA molecular sieve for size-selective molecular recognition to improve the biosensing selectivity in living cells. The system consists of functional nucleic acid probes (e.g., DNAzymes, aptamers and molecular beacons) encapsulated into the inner cavity of framework nucleic acid. Thus, small target molecules are able to enter the cavity for efficient molecular recognition, while large molecules are prohibited. The system not only effectively protect probes from nuclease degradation and nonspecific proteins binding, but also successfully realize size-selective discrimination between mature microRNA and precursor microRNA in living cells. Therefore, the DNA molecular sieve provides a simple, general, efficient and controllable approach for size-selective molecular recognition in biomedical studies and clinical diagnoses.

Size-selective discrimination is an issue in biosensing. Here, the authors report on a size selective DNA nanocage which excludes agents based on size and protects the probes against degradation, and demonstrate the discrimination between mature and precursor miRNA.

Portable and Field-Ready Detection of Circulating MicroRNAs with Paper-Based Bioluminescent Sensing and Isothermal Amplification

We present a paper-based system that integrates bioluminescence resonance energy transfer (BRET) and isothermal amplification for the analysis of tumor-associated circulating microRNAs (miRNAs) in clinical serum samples. The analysis procedure could be easily accomplished with two pieces of functionalized paper and a low-cost smartphone-based device, which enables sequence-specific quantification of femtomolar miRNAs, without the need for tedious handling of aqueous reactions and operation of sophisticated equipment. Furthermore, the analytical performance of the proposed paper-based system was highly stable at room temperature, demonstrating its capability for cold-chain-free and remote deployment. These qualities highlight the practical utility of our method for the portable and field-ready miRNA diagnostic tests in resource-limited settings.

Recent Advances on Electrochemical Biosensing Strategies toward Universal Point-of-Care Systems

A number of very recently developed electrochemical biosensing strategies are promoting electrochemical biosensing systems into practical point-of-care applications. The focus of research endeavors has transferred from detection of a specific analyte to the development of general biosensing strategies that can be applied for a single category of analytes, such as nucleic acids, proteins, and cells. In this Minireview, recent cutting-edge research on electrochemical biosensing strategies are described. These developments resolved critical challenges regarding the application of electrochemical biosensors to practical point-of-care systems, such as rapid readout, simple biosensor fabrication method, ultra-high detection sensitivity, direct analysis in a complex biological matrix, and multiplexed target analysis. This Minireview provides general guidelines both for scientists in the biosensing research community and for the biosensor industry on development of point-of-care system, benefiting global healthcare.

Development and Applications of Bioluminescent and Chemiluminescent Reporters and Biosensors

Although fluorescent reporters and biosensors have become indispensable tools in biological and biomedical fields, fluorescence measurements require external excitation light, thereby limiting their use in thick tissues and live animals. Bioluminescent reporters and biosensors may potentially overcome this hurdle because they use enzyme-catalyzed exothermic biochemical reactions to generate excited-state emitters. This review first introduces the development of bioluminescent reporters, and next, their applications in sensing biological changes in vitro and in vivo as biosensors. Lastly, we discuss chemiluminescent sensors that produce photons in the absence of luciferases. This review aims to explore fundamentals and experimental insights and to emphasize the yet-to-be-reached potential of next-generation luminescent reporters and biosensors.

Construction of ligand assay systems by protein-based semisynthetic biosensors

Proteins as causative agents of diseases such as cancers, diabetes and neurological disorders are attractive drug targets. For developing chemicals selectively acting on key disease-causing proteins, one useful concept is the direct conversion of such target proteins into biosensors. This approach provides ligand-binding assay systems based on protein-based biosensors, which can quantitatively evaluate interactions between the protein and a specific ligand in many environments. Site-specific chemical modifications are used widely for the creation of protein-based semisynthetic biosensors in vitro. Notably, a few bio-orthogonal approaches capable of selectively modifying drug-targets have been developed, allowing conversion of specific target proteins into semisynthetic biosensors in live cells. These biosensors can be used for quantitative drug binding analyses in native environments. In this review, we discuss recent efforts for the construction of ligand assay systems using semisynthetic protein-based biosensors and their application to quantitative analysis and high-throughput screening of small molecules for drug discovery.