Selective Ring-Opening Polymerization of Non-Strained γ-Butyrolactone Catalyzed by A Cyclic Trimeric Phosphazene Base

Achieving Exceptional Thermal and Hydrolytic Resistance in Chemically Circular Polyesters via In-Chain 1,3-Cyclobutane Rings

Polyesters, a highly promising class of circular polymers for achieving a closed-loop sustainable plastic economy, inherently exhibit material stability defects, especially in thermal and hydrolytic instability. Here, we introduce a class of polyesters, P(4R-BL) (R=Ph, Bu), featuring conformationally rigid 1,3-cyclobutane rings in the backbone. These polyesters not only exhibit superior thermostability (Td,5%=376-380 °C) but also demonstrate exceptional hydrolytic resistance with good integrity even after 1 year in basic and acidic aqueous solutions, distinguishing themselves from typical counterparts. Tailoring the flexibility of the side group R enables the controlled thermal and mechanical performance of P(4Ph-BL) and P(4Bu-BL) to rival durable syndiotactic polystyrene (SPS) and low-density polyethylene (LDPE), respectively. Significantly, despite their high stability, both polyesters can be effectively depolymerized into pristine monomers, establishing a circular life cycle.

O/S Exchange Reaction in Synthesizing Sulfur-Containing Polymers

Using carbon disulfide (CS2) and carbonyl sulfide (COS) as sulfur-containing and one-carbon feedstocks to make value-added products is paramount for both pure and applied chemistry and environmental science. One of the practical strategies is to copolymerize these bulk chemicals with epoxides to produce sulfur-containing polymers. This approach contributes to improving the sustainability of polymer manufacturing, provides highly desired functional polymer materials, and has attracted much attention. However, these copolymerizations invariably exhibit the intensely complicated chemistry of O/S exchange reaction, leading to sulfur-containing polymers with diverse architectures. As the understanding of O/S exchange continues to deepen, recent efforts have guided significant advances in the synthesis of CS2- and COS-based polymers. This review examines the O/S exchange chemistry and summarizes the recent progress in this field to promote the further advance of synthesizing sulfur-containing polymers from CS2 and COS.

Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy

Polyesters carrying polar main-chain ester linkages exhibit distinct material properties for diverse applications and thus play an important role in today's plastics economy. It is anticipated that they will play an even greater role in tomorrow's circular plastics economy that focuses on sustainability, thanks to the abundant availability of their biosourced building blocks and the presence of the main-chain ester bonds that can be chemically or biologically cleaved on demand by multiple methods and thus bring about more desired end-of-life plastic waste management options. Because of this potential and promise, there have been intense research activities directed at addressing recycling, upcycling or biodegradation of existing legacy polyesters, designing their biorenewable alternatives, and redesigning future polyesters with intrinsic chemical recyclability and tailored performance that can rival today's commodity plastics that are either petroleum based and/or hard to recycle. This review captures these exciting recent developments and outlines future challenges and opportunities. Case studies on the legacy polyesters, poly(lactic acid), poly(3-hydroxyalkanoate)s, poly(ethylene terephthalate), poly(butylene succinate), and poly(butylene-adipate terephthalate), are presented, and emerging chemically recyclable polyesters are comprehensively reviewed.

Boosting the Reactivity of Bis-Lactones to Enable Step-Growth Polymerization at Room Temperature

The development of new sustainable polymeric materials endowed with improved performances but minimal environmental impact is a major concern, with polyesters as primary targets. Lactones are key monomers thanks to ring-opening polymerization, but their use in step-growth polymerization has remained scarce and challenging. Herein, we report a powerful bis(γ-lactone) (γSL) that was efficiently prepared on a gram scale from malonic acid by Pd-catalyzed cycloisomerization. The γ-exomethylene moieties and the spiro structure greatly enhance its reactivity toward ring-opening and enable step-growth polymerization under mild conditions. Using diols, dithiols, or diamines as comonomers, a variety of regioregular (AB)n copolymers with diverse linkages and functional groups (from oxo-ester to β-thioether lactone and β-hydroxy-lactame) have been readily prepared. Reaction modeling and monitoring revealed the occurrence of an original trans-lactonization process following the first ring-opening of γSL. This peculiar reactivity opens the way to regioregular (ABAC)n terpolymers, as illustrated by the successive step-growth polymerization of γSL with a diol and a diamine.

Multifunctional Fluorinated Lubricant-Infused Poly(4-Hydroxybutyrate) (P4HB) Membranes for Full-Thickness Abdominal Wall Defect Repair

Abdominal wall defect caused by surgical trauma, congenital rupture, or tumor resection may result in hernia formation or even death. Tension-free abdominal wall defect repair by using patches is the gold standard to solve such problems. However, adhesions following patch implantation remain one of the most challenging issues in surgical practice. The development of new kinds of barriers is key to addressing peritoneal adhesions and repairing abdominal wall defects. It is already well recognized that ideal barrier materials need to have good resistance to nonspecific protein adsorption, cell adhesion, and bacterial colonization for preventing the initial development of adhesion. Herein, electrospun poly(4-hydroxybutyrate) (P4HB) membranes infused with perfluorocarbon oil are used as physical barriers. The oil-infused P4HB membranes can greatly prevent protein attachment and reduce blood cell adhesion in vitro. It is further shown that the perfluorocarbon oil-infused P4HB membranes can reduce bacterial colonization. The in vivo study reveals that perfluoro(decahydronaphthalene)-infused P4HB membranes can significantly prevent peritoneal adhesions in the classic abdominal wall defects' model and accelerate defect repair, as evidenced by gross examination and histological evaluation. This work provides a safe fluorinated lubricant-impregnated P4HB physical barrier to inhibit the formation of postoperative peritoneal adhesions and efficiently repair soft-tissue defects.

A recyclable polyester library from reversible alternating copolymerization of aldehyde and cyclic anhydride

Our society is pursuing chemically recyclable polymers to accelerate the green revolution in plastics. Here, we develop a recyclable polyester library from the alternating copolymerization of aldehyde and cyclic anhydride. Although these two monomer sets have little or no thermodynamic driving force for homopolymerization, their copolymerization demonstrates the unexpected alternating characteristics. In addition to readily available monomers, the method is performed under mild conditions, uses common Lewis/Brønsted acids as catalysts, achieves the facile tuning of polyester structure using two distinct monomer sets, and yields 60 polyesters. Interestingly, the copolymerization exhibits the chemical reversibility attributed to its relatively low enthalpy, which makes the resulting polyesters perform closed-loop recycling to monomers at high temperatures. This study provides a modular, efficient, and facile synthesis of recyclable polyesters using sustainable monomers.

Converting Non-strained γ-Valerolactone and Derivatives into Sustainable Polythioesters via Isomerization-driven Cationic Ring-Opening Polymerization of Thionolactone Intermediate

This contribution reports the efficient conversion of γ-valerolactone and its derivatives, abundant but unexplored renewable feedstocks, into sustainable and degradable polythioesters via the establishment of the first isomerization-driven ring-opening polymerizations (IROPs) of corresponding thionolactone intermediates. The key to this success relies on the development of a new simple and robust [Et₃ O]⁺ [B(C₆ F₅ )₄ ]^- cationic initiator which possesses high activity, exclusive selectivity, living nature, and broad scope of thionolactones. A complete inversion of configuration during IROP of enantiopure γ-thionovalerolactone is also disclosed, affording isotactic semicrystalline polythioesters (T_m =87.0 °C) with mechanical property compared well to the representative commodity polyolefins. The formation of a highly crystalline supramolecular stereocomplex with enhanced thermal property (T_m =117.6 °C) has also been revealed.

Rapid Ring-Opening Polymerization of γ-Butyrolactone toward High-Molecular-Weight Poly (γ-butyrolactone) by an Organophosphazene Base and Bisurea Binary Catalyst

The low temperature condition, long reaction time and associated high energy inputs involved in the polymerization process still hampered the scalable production of poly(γ-butyrolactone) (PγBL) via ring-opening polymerization (ROP) of low strained γBL due to its unfavorable thermodynamics. In this contribution, we presented the rapid ROP of γBL using a bisurea in combination with an organophosphazene base as the binary catalyst. Well-defined PγBL samples with various terminal groups were prepared by using different alcohol initiators. The bisurea as a co-catalyst exhibited much higher catalytic activity even compared to the most active monourea in previous report as supported by the kinetic experiments. A moderate monomer conversion of 61% was achieved within 10 mins, producing high-molecular-weight PγBL with M_n up to 37.5 kDa and good mechanical properties. The short polymerization time considerably reduced the energy cost for the ROP of γBL conducted at low temperature condition. This study may clear away obstacles for the scalable production and practical applications for PγBL.

Advances in the Synthesis of Chemically Recyclable Polymers

The development of modern society is closely related to polymer materials. However, the accumulation of polymer materials and their evolution in the environment causes not only serious environmental problems, but also waste of resources. Although physical processing can be used to reuse polymers, the properties of the resulting polymers are significantly degraded. Chemically recyclable polymers, a type of polymer that degrades into monomers, can be an effective solution to the degradation of polymer properties caused by physical recycling of polymers. The ideal chemical recycling of polymers, i. e., quantitative conversion of the polymer to monomers at low energy consumption and repolymerization of the formed monomers into polymers with comparable properties to the original, is an attractive research goal. In recent years, significant progress has been made in the design of recyclable polymers, enabling the regulation of the "polymerization-depolymerization" equilibrium and closed-loop recycling under mild conditions. This review will focus on the following aspects of closed-loop recycling of poly(sulfur) esters, polycarbonates, polyacetals, polyolefins, and poly(disulfide) polymer, illustrate the challenges in this area, and provide an outlook on future directions.

Polyphosphazene-Functionalized Microspheres as Efficient Catalysts for the Knoevenagel Reaction under Mild Conditions

Inspired by the formation of microspheres by hexachlorocyclotriphosphazene and 4, 4'-sulfonyldiphenol, polyphosphazene-functionalized microspheres were developed. Benefits from the supported supper basic phosphazene, the yield exceeded 99 % at room temperature in the manner of second-order reaction kinetics toward Knoevenagel reaction and was still maintained at 99 % after 16 runs. In the experimental temperature from 0 °C to 90 °C, the yield increased from 92 % to 99 %, reflecting that the catalyst had strong applicability under mild conditions. This behavior was conducive to energy conservation. Meanwhile, simple separation and recovery further enhanced this advantage. In addition, the catalyst was also found to be insensitive to aqueous solution or organic solvents such as toluene, THF, EtOH and CH₃ CN. This property gave the Knoevenagel reaction a vast choice. All these features exhibit that this novel catalyst is an attractive and applicable alternative in organic synthesis.

Functionalizable and Chemically Recyclable Thermoplastics from Chemoselective Ring-Opening Polymerization of Bio-renewable Bifunctional α-Methylene-δ-valerolactone

It is a highly attractive strategy to develop chemically recyclable polymers to establish a circular plastic economy. Despite the recent advancements, chemically recyclable polymers still face challenges including high energy cost for polymer preparation or recycling, poor monomer recovery selectivity and efficiency as well as undesired material performance. In this contribution, we present the chemoselective controlled ring-opening polymerization of bio-renewable bifunctional α-methylene-δ-valerolactone (MVL) to produce exclusive functionalizable polyester using strong base/urea binary catalysts. The obtained polyester with high molar mass exhibits good tensile strength comparable to that of some commodity plastics. Remarkably, the obtained polyester can be depolymerized to recover pristine monomer with a 96 % yield by thermolysis, thus successfully establishing a closed-loop life cycle.

Rapid and Controlled Polymerization of Bio-sourced δ-Caprolactone toward Fully Recyclable Polyesters and Thermoplastic Elastomers

The development of chemically recyclable polymers presents the most appealing solution to address the plastics' end-of-use problem. Despite the recent advancements, it is highly desirable to develop chemically recyclable polymers from commercially available monomers to avoid the costly and time-consuming commercialization. In this contribution, we achieve the controlled ring-opening polymerization (ROP) of bio-sourced δ-caprolactone (δCL) using strong base/urea binary catalysts. The obtained PδCL is capable of chemical recycling to δCL in an almost quantitative yield by thermolysis. Sequential ROP of δCL and l-lactide (l-LA) affords well-defined PLLA-b-PδCL-b-PLLA triblock copolymers, which behave as thermoplastic elastomers with excellent elastic recovery, tensile strength and ultimate elongation. The upcycling of PLLA-b-PδCL-b-PLLA to recover ethyl lactate and δCL with high yields is achieved by refluxing with ethanol and then distillation under reduced pressure.

Bioactive Poly(4-hydroxybutyrate)/Poly(ethylene glycol) Fibrous Dressings Incorporated with Zinc Oxide Nanoparticles for Efficient Antibacterial Therapy and Rapid Clotting

Antibacterial and hemostatic. This article is protected by copyright. All rights reserved.

Towards high-performance sustainable polymers via isomerization-driven irreversible ring-opening polymerization of five-membered thionolactones

The development of sustainable polymers that possess useful material properties competitive with existing petroleum-derived polymers is a crucial goal but remains a formidable challenge for polymer science. Here we demonstrate that irreversible ring-opening polymerization (IROP) of biomass-derived five-membered thionolactones is an effective and robust strategy for the polymerization of non-strained five-membered rings-these polymerizations are commonly thermodynamically forbidden under ambient conditions, at industrially relevant temperatures of 80-100 °C. Computational studies reveal that the selective IROP of these thionolactones is thermodynamically driven by S/O isomerization during the ring-opening process. IROP of γ-thionobutyrolactone, a representative non-strained thionolactone, affords a sustainable polymer from renewable resources that possesses external-stimuli-triggered degradability. This poly(thiolactone) also exhibits high performance, with its key thermal and mechanical properties comparing well to those of commercial petroleum-based low-density polyethylene. This IROP strategy will enable conversion of five-membered lactones, generally unachievable by other polymerization methods, into sustainable polymers with a range of potential applications.

Chemically Recyclable Polyesters from CO2, H2 and 1,3-Butadiene

Chemically recyclable solid polymeric materials with commercializable properties only using CO₂ and inexpensive bulk chemicals as chemical feedstock can open a brand-new avenue to economically viable, large-scale fixation of CO₂ over a long period of time. Despite previous great advancements, development of such a kind of CO₂-based polymers remains a long-term unsolved research challenge of great significance. Herein, we reported the first methodology to polymerize six-membered lactone with two substituents vicinal to the ester group (HL), a compound previously found to be non-polymerizable. The present methodology enables the first synthesis of chemically recyclable solid polyesters (polyHL) with a high CO₂ content (28 wt %) and large molecular weights (M_n up to 613.8 kg mol⁻¹). Transparent membranes with promising pressure-sensitive adhesive (PSA) properties comparable with their commercial counterparts can be conveniently fabricated from the polyesters. Mechanistic studies indicate that rigorous removal of water impurity is the key to the successful polymerization of the relatively inert disubstituted six-membered lactone. A complete monomer recovery from polyHL was also successfully achieved under mild catalytic conditions. The synthesis of polyHL only requires CO₂ and two inexpensive bulk chemicals, H₂ and 1,3-butadiene, as the starting materials, thus providing a new strategy for potential scalable chemical utilization of CO₂ with desirable economic values and concomitant mitigation of CO₂ emissions. This work should inspire future research to make useful new solid CO₂-based polymers that can meaningfully increase the scale of chemical utilization of CO₂ and promote the contribution of chemical utilization of CO₂ to global mitigation of CO₂ emissions.

•

CO₂-based recyclable polymers are promising in reducing CO₂ emission and pollution

•

Disubstituted δ-lactone, a previously non-polymerizable monomer, was polymerized

•

Complete monomer recovery was successfully achieved via chemical recycling process

•

CO₂ constitutes 28% of the weight of newly designed chemically recyclable polymers

•

The polymers show pressure-sensitive adhesive property comparable to commercial tapes

Ultrafast ring-opening copolymerization of lactide with glycolide toward random poly(lactic-co-glycolic acid) copolymers by organophosphazene base and urea binary catalysts

The preparation of poly(lactic-co-glycolic acid) (PLGA) copolymers with controllable random microstructures remains as a challenge due to the much higher reactivity of glycolide (GA) compared to lactide (LA). In this...

Polycondensation in confined nanopores toward the selective formation of narrowly dispersed linear polyesters

While the synthesis of linear polymers with both ends conserved is severely impeded due to the inevitable macrocyclization in step-growth polymerization, this work provides a new idea to mainly formation of linear polymer chains.

Access to high-molecular-weight poly(γ-butyrolactone) by using simple commercial catalysts

The simple commercial organomagnesium catalysts were utilized for efficient access to high-molecular-weight poly(γ-butyrolactone) and facile manipulation of the reaction conditions enabled the polymer topology controlled.

From Impossible to Possible: Atom-Economic Polymerization of Low Strain Five-Membered Carbonates

The direct ring-opening polymerization (ROP) of propylene carbonate (PC) only affords oligomers with substantial unidentified by-products, which hinders the efficient utilization of PC. Through detailed studies, for the first time, a careful mechanism involving the in situ release of propylene oxide (PO) from PC decarboxylation is proposed. Further, we report a novel strategy of copolymerization of PC/cyclic anhydrides via in situ capture of the formed intermediates. Results show that PC is successfully transformed into polyesters. Especially for the ring-opening alternating copolymerization (ROAC) of PC/phthalic anhydride (PA), a variety of advantages are manifold: i) slow-release of PO ensuring a perfectly alternating structure; ii) quantitative and fast transformation of PC; iii) visualization of polymerization process by a CO₂ pressure gauge. Of importance, through tandem polymerizations, PC is fully transformed into polyesters and polycarbonates concurrently, thus achieving PC utilization with a high atom-economy.

Synthesis of Diverse Polycarbonates by Organocatalytic Copolymerization of CO2 and Epoxides: From High Pressure and Temperature to Ambient Conditions

Organophosphazenes combined with triethylborane (TEB) were selected as binary organocatalyts for the copolymerization of CO₂ and epoxides. Both the activity and selectivity were highly dependent on the nature of phosphazenes. 2,4,6-Tris[tri(1-pyrrolidinyl)-iminophosphorane]-1,3,5-triazine (C₃ N₃ -Py-P₃ ) with a relatively low basicity (pK_a =26.5 in CD₃ CN) and a bulky molecular size (φ=1.3 nm) exhibited an unprecedented efficiency (TON up to 12240) and selectivity (>99 % polymer selectivity and >99 % carbonate linkages) toward copolymerization of CO₂ and cyclohexene oxide (CHO), and produced CO₂ -based polycarbonates (CO₂ -PCs) with high molar masses (M_n up to 275.5 kDa) at 1 MPa of CO₂ and 80 °C. Surprisingly, this binary catalytic system achieved efficient CO₂ /CHO copolymerization with TOF up to 95 h^-1 at 1 atm pressure and room temperature.

The organocatalytic synthesis of perfluorophenylsulfides via the thiolation of trimethyl(perfluorophenyl)silanes and thiosulfonates

The organic superbase t-Bu-P₄-catalyzed direct thiolation of trimethyl(perfluorophenyl)silanes and thiosulfonates was developed. Yields of perfluorophenylsulfides of up to 97% under catalysis of 5 mol% t-Bu-P₄ were achieved. This method was shown to provide an efficient way to construct the perfluorophenyl-sulfur bond under mild metal-free reaction conditions.

High pressure as a novel tool for the cationic ROP of γ-butyrolactone

In this study, we report the acid-catalyzed and high pressure assisted ring-opening polymerization (ROP) of γ-butyrolactone (GBL). The use of a dually-catalyzed approach combining an external physical factor and internal catalyst (trifluoromethanesulfonic acid (TfOH) or p-toluenesulfonic acid (PTSA)) enforced ROP of GBL, which is considered as hardly polymerizable monomer still remaining a challenge for the modern polymer chemistry. The experiments performed at various thermodynamic conditions (T = 278–323 K and p = 700–1500 MPa) clearly showed that the high pressure supported polymerization process led to obtaining well-defined macromolecules of better parameters (M_n = 2200–9700 g mol⁻¹; Đ = 1.05–1.46) than those previously reported. Furthermore, the parabolic-like dependence of both the molecular weight (M_W) and the yield of obtained polymers on variation in temperature and pressure at either isobaric or isothermal conditions was also noticed, allowing the determination of optimal conditions for the polymerization process. However, most importantly, this strategy allowed to significantly reduce the reaction time (just 3 h at room temperature) and increase the yield of obtained polymers (up to 0.62 g_PGBL/g_GBL). Moreover, despite using a strongly acidic catalyst, synthesized polymers remained non-toxic and biocompatible, as proven by the cytotoxicity test we performed in further analysis. Additional investigation (including MALDI-TOF measurements) showed that the catalyst selection affected not only M_W and yield but also the linear/cyclic form content in obtained macromolecules. These findings show the way to tune the properties of PGBL and obtain polymer suitable for application in the biomedical industry.

Well-defined poly(γ-butyrolactone) was synthesized with great efficiency via high pressure assisted cationic ROP of hardly polimerizable γ-butyrolactone.

Bioabsorbable poly(4-hydroxybutyrate) (P4HB) fibrous membranes as a potential dermal substitute

Dermal substitutes are indispensable for repairing large full-thickness skin defects. Only a few biomaterials for dermal substitution have been put into clinical practice. Therefore, novel artificial dermal substitutes that can meet clinical requirements are in urgent need. Biodegradable poly(4-hydroxybutyrate) (P4HB), which has been approved by the U.S. FDA, can be considered as a possible alternative biomaterial to construct dermal substitutes. In this work, three-dimensional P4HB fibrous membranes were constructed by an electrospinning technique. These P4HB fibrous membranes showed excellent air-permeability, and better water uptake capacity compared to P4HB strip and polycaprolactone (PCL) fibrous membrane controls. The in vitro hemocompatibility and cytotoxicity of P4HB fibrous membranes were investigated. In vivo Sprague-Dawley (SD) rat model studies revealed that P4HB fibrous membranes can be used as artificial dermis to improve wound healing for full-thickness skin defects.

Phosphorus-Containing Superbases: Recent Progress in the Chemistry of Electron-Abundant Phosphines and Phosphazenes

The renaissance of Brønsted superbases is primarily based on their pronounced capacity for a large variety of chemical transformations under mild reaction conditions. Four major set screws are available for the selective tuning of the basicity: the nature of the basic center (N, P, …), the degree of electron donation by substituents to the central atom, the possibility of charge delocalization, and the energy gain by hydrogen bonding. Within the past decades, a plethora of neutral electron-rich phosphine and phosphazene bases have appeared in the literature. Their outstanding properties and advantages over inorganic or charged bases have now made them indispensable as auxiliary bases in deprotonation processes. Herein, an update of the chemistry of basic phosphines and phosphazenes is given. In addition, due to widespread interest, their use in catalysis or as ligands in coordination chemistry is highlighted.

Injectable Cell- and Growth Factor-Free Poly(4-hydroxybutyrate) (P4HB) Microspheres with Open Porous Structures and Great Efficiency of Promoting Bone Regeneration

Delivering injectable microspheres in a minimally invasive way to repair complexly shaped tissue defects renders them attractive for clinical use. Especially, open porous microspheres that provide sufficient internal space for cell proliferation and nutrient diffusions can efficiently aid to completing reconstructions of tissue defects. In this work, chemically synthesized and biodegradable poly(4-hydroxybutyrate) (P4HB), which is the U.S. FDA-approved polyhydroxyalkanoate (PHA), was employed for fabricating open porous microspheres using a double-emulsion solvent evaporation method. The influences of fabrication parameters were discussed. It was found that the P4HB-based cell-free and growth factor-free open porous microspheres can enhance osteoblast differentiation of adipose-derived stem cells in vitro and accelerate rat calvarial bone-defect healing in vivo. These results demonstrated that the injectable open porous P4HB microspheres present a remarkable potential in bone tissue regeneration.

Robust Electrospun Nanofibers from Chemosynthetic Poly(4-hydroxybutyrate) as Artificial Dural Substitute

Bioresorbable poly(4-hydroxybutyrate) (P4HB) may fulfill the specific requirements that are necessary for a dural substitute, including its high elasticity, long-term strength retention properties, and the biocompatibility without significant accumulation of acidic degradation products. However, commercial P4HB can only be produced by the bacterial fermentation, which limits its applications in the cerebrospinal system due to higher endotoxin restriction. Meanwhile, P4HB can be prepared via the ring-opening polymerization of γ-butyrolactone. In this contribution, high molecular weight P4HB from chemosynthesis is electrospun into fibrous membrane, showing good mechanical properties that match the natural dura mater. Such P4HB membrane induces fast cellular migration, adhesion, and proliferation of fibroblasts in vitro. Subcutaneous implantation in rats demonstrates excellent biocompatibility of the P4HB membrane with proper biodegradation behaviors. After implantation in the rabbit dural defect model as an onlay graft, the P4HB membranes prevent cerebrospinal fluid leakage and regenerate dura tissue without detecting any local or systematic infections or foreign body responses. Thus, the electrospun P4HB membranes may be particularly useful as artificial dural substitutes to induce wound closure and tissue regeneration, which will be of great benefit to neurosurgery in the future.