Controlling the Host-Guest Interaction Mode through a Redox Stimulus

Stereochemical Control of Redox CoII/CoIII-Cages with Switchable Cotton Effects Based on Labile-Static States

The structural dynamics of artificial assemblies, in aspects such as molecular recognition and structural transformation, provide us with a blueprint to achieve bioinspired applications. Here, we describe the assembly of redox-switchable chiral metal-organic cages Λ8/Δ8-[Pd6(CoIIL3)8]28+ and Λ8/Δ8-[Pd6(CoIIIL3)8]36+. These isomeric cages demonstrate an on-off chirality logic gate controlled by their chemical and stereostructural dynamics tunable through redox transitions between the labile CoII-state and static CoIII-state with a distinct Cotton effect. The transition between different states is enabled by a reversible redox process and chiral recognition originating in the tris-chelate Co-centers. All cages in two states are thoroughly characterized by NMR, ESI-MS, CV, CD, and X-ray crystallographic analysis, which clarify their redox-switching behaviors upon chemical reduction/oxidation. The stereochemical lability of the CoII-center endows the Λ8/Δ8-CoII-cages with efficient chiral-induction by enantiomeric guests, leading to enantiomeric isomerization to switch between Λ8/Δ8-CoII-cages, which can be stabilized by oxidation to their chemically inert forms of Λ8/Δ8-CoIII-cages. Kinetic studies reveal that the isomerization rate of the Δ8-CoIII-cage is at least an order of magnitude slower than that of the Δ8-CoII-cage even at an elevated temperature, while its activation energy is 16 kcal mol-1 higher than that of the CoII-cage.

Photoswitching of Co(ii)-based coordination cages containing azobenzene backbones

Inclusion of photoswitchable azobenzene units as spacers into ditopic bridging ligands Lm and Lp, containing two chelating pyrazolyl-pyridine termini, allows formation of metal complex assemblies with Co(ii) that undergo a range of light-induced structural transformations. One notable result is the light-induced conversion of a Co2(Lp)3 dinuclear triple helicate (based on the E ligand isomer) to a C 3-symmetric Co4(Lp)6 assembly, assumed to be an edge-bridged tetrahedral cage, based on the Z ligand isomer. Another is the preparation of a series of Co4(Lm)6 complexes, of which Co4(E-Lm)6 was crystallographically characterised and consists of a pair of Co2(Lm)2 double helicates connected by an additional two bridging ligands which span the pair of helicate units, giving a cyclic Co4 array in which one and then two bridging ligands alternate around the periphery. A set of Co4(Lm)6 complexes could be prepared containing different ratios of Z : E ligand isomers (0 : 6, 2 : 4, 4 : 2 and 6 : 0) of which Co4(Z-Lm)2(E-Lm)4 was particularly stable and dominated the speciation behaviour, either during light-induced switching of the ligand geometry in pre-formed complexes, or when ligand isomers were combined in different proportions during the preparation. These examples of (i) interconversion between Co2L3 (helicate) and (ii) Co4L6 (cage) assemblies with Lp, and the interconversion between a series of Co4L6 assemblies Co4(Z-Lm)n(E-Lm)6-n with Lm, constitute significant advances in the field of photoswitchable supramolecular assemblies.

Precise Post-Synthetic Modification of Heterometal-Organic Capsules for Selectively Encapsulating Tetrahedral Anions

Post-synthetic modification plays a crucial role in precisely adjusting the structure and functions of advanced materials. Herein, we report the self-assembly of a tubular heterometallic Pd3Cu6L16 capsule that incorporates Pd(II) and CuL1 metalloligands. This capsule undergoes further modification with two tridentate anionic ligands (L2) to afford a bicapped Pd3Cu6L16L22 capsule with an Edshammer polyhedral structure. By employing transition metal ions, acid, and oxidation agents, the bicapped capsule can be converted into an uncapped one. This uncapped form can then revert back to the bicapped structure on the addition of Br- ions and a base. Interestingly, introducing Ag+ ions leads to the removal of one L2 ligand from the bicapped capsule, yielding a mono-capped Pd3Cu6L16L2 structure. Furthermore, the size of the anions critically influences the precise control over the post-synthetic modifications of the capsules. It was demonstrated that these capsules selectively encapsulate tetrahedral anions, offering a novel approach for the design of intelligent molecular delivery systems.

Dual-controlled guest release from coordination cages

Despite having significant applications in the construction of controlled delivery systems with high anti-interference capability, to our knowledge dual-controlled molecular release has not yet been achieved based on small molecular/supramolecular entities. Herein, we report a dual-controlled release system based on coordination cages, for which releasing the guest from the cage demands synchronously altering the coordinative metal cations and the solvent. The cages, Hg5L2 and Ag5L2, are constructed via coordination-driven self-assembly of a corannulene-based ligand. While Hg5L2 shows a solvent-independent guest encapsulation in all the studied solvents, Ag5L2 is able to encapsulate the guests in only some of the solvents, such as acetone-d6, but will liberate the encapsulated guests in 1,1,2,2-tetrachloroethane-d2. Hg5L2 and Ag5L2 are interconvertible. Thus, the release of guests from Hg5L2 in acetone-d6 can be achieved, but requires two separate operations, including metal substitutions and a change of the solvent. Dual-controlled systems as such could be useful in complicated molecular release process to avoid those undesired stimulus-responses.

Delving into the Variability of Supramolecular Affinity: Self-Ion Pairing as a Central Player in Aqueous Host-Guest Chemistry

The determination of binding constants is a key matter in evaluating the strength of host-guest interactions. However, the profound impact of self-ion pairing on this parameter is often underrated in aqueous solution, leading in some cases to a misinterpretation of the true potential of supramolecular assemblies. In the present study, we aim to shed further light on this critical factor by exploring the concentration-dependent behavior of a multicharged pillararene in water. Our observations reveal an extraordinary 1-million-fold variability in the affinity of this macrocycle toward a given anion, showcasing the highly dynamic character of electrostatic interactions. We argue that these findings bring to the forefront the inherent determinism that underlies the estimation of affinity constants, a factor profoundly shaped by both the sensitivity of the instrumental technique in use and the intricacies of the experimental design itself. In terms of applications, these results may provide the opportunity to optimize the operational concentrations of multicharged hosts in different scenarios, aiming to achieve their maximum efficiency based on the intended application. Unlocking the potential of this hidden variability may pave the way for the creation of novel molecular materials with advanced functionalities.

Cage Match: Comparing the Anion Binding Ability of Isostructural Versus Isofunctional Pairs of Metal-Organic Nanocages

Affinities of six anions (mesylate, acetate, trifluoroacetate, p-toluenecarboxylate, p-toluenesulfonate, and perfluorooctanoate) for three related Pt2+ -linked porphyrin nanocages were measured to probe the influence of different noncovalent recognition motifs (e. g., hydrogen bonding, electrostatics, π bonding) on anion binding. Two new hosts of M6 L3 12+ (1b) and M4 L2 8+ (2) composition (M=(en)Pt2+ , L=(3-py)4 porphyrin) were prepared in a one-pot synthesis and allowed comparison of hosts that differ in structure while maintaining similar N-H hydrogen-bond donor ability. Comparisons of isostructural hosts that differ in hydrogen-bonding ability were made between 1b and a related M6 L3 12+ nanoprism (1a, M=(tmeda)Pt2+ ) that lacks N-H groups. Considerable variation in association constants (K1 =1.6×103  M-1 to 1.3×108  M-1 ) and binding mode (exo vs. endo) were found for different host-guest combinations. Strongest binding was seen between p-toluenecarboxylate and 1b, but surprisingly, association of this guest with 1a was only slightly weaker despite the absence of NH⋅⋅⋅O interactions. The high affinity between p-toluenecarboxylate and 1a could be turned off by protonation, and this behavior was used to toggle between the binding of this guest and the environmental pollutant perfluorooctanoate, which otherwise has a lower affinity for the host.

Light-driven modulation of electrical conductance with photochromic switches: bridging photochemistry with optoelectronics

Photochromic conducting molecules have emerged because of their unique capacity to modulate electrical conductivity upon exposure to light, toggling between high and low conductive states. This unique amalgamation has unlocked novel avenues for the application of these materials across diverse areas in optoelectronics and smart materials. The fundamental mechanism underpinning this phenomenon is based on the light-driven isomerization of conjugated π-systems which influences the extent of conjugation. The photoisomerization process discussed here involves photochromic switches such as azobenzenes, diarylethenes, spiropyrans, dimethyldihydropyrenes, and norbornadiene. The change in the degree of conjugation alters the charge transport in both single molecules and bulk states in solid samples or solutions. This article discusses a number of recent examples of photochromic conducting systems and the challenges and potentials of the field.

Redox Triggers Guest Release and Uptake Across a Series of Azopyridine-Based Metal-Organic Capsules

Precise control over guest release and recapture using external stimuli is a valuable goal, potentially enabling new modes of chemical purification. Including redox moieties within the ligand cores of molecular capsules to trigger the release and uptake of guests has proved effective, but this technique is limited to certain capsules and guests. Herein, the construction of a series of novel metal-organic capsules from ditopic, tritopic, and tetratopic ligands is demonstrated, all of which contain redox-active azo groups coordinated to FeII centers. Compared to their iminopyridine-based analogs, this new class of azopyridine-based capsules possesses larger cavities, capable of encapsulating more voluminous guests. Upon reduction of the capsules, their guests are released and may then be re-encapsulated when the capsules are regenerated by oxidation. Since the redox centers are on the ligand arms, they are modular and can be attached to a variety of ligand cores to afford varying and predictable architectures. This method thus shows promise as a generalized approach for designing redox-controlled guest release and uptake systems.

A Redox-Responsive Ferrocene-Based Capsule Displaying Unusual Encapsulation-Induced Charge-Transfer Interactions

A ferrocene-based capsule is spontaneously and quantitatively formed in water by the assembly of bent amphiphiles carrying two ferrocene units. The disassembly and assembly of the new organometallic capsule, with a well-defined and highly condensed ferrocene core, are demonstrated by chemical redox stimuli in a fully reversible fashion under ambient conditions. In contrast to previously reported multiferrocene assemblies, only the present capsule efficiently encapsulates typical organic/inorganic dyes as well as electron-accepting molecules in water. As a result, unusual host-guest charge-transfer (CT) interactions, displaying relatively wide absorption bands in the visible to near-infrared region (λ=650-1350 nm), are observed upon the encapsulation of acceptors (i.e., chloranil and TCNQ). The resultant encapsulation-induced CT interactions can be released by a redox stimulus through the disassembly of the capsule.

Controlled Self-Assembly, Isomerism, and Guest Uptake/Release of Charge-Reversible Lanthanide-Organic Octahedral Cages

Charge plays a crucial role in the function of molecular and supramolecular systems, but coordination hosts capable of orthogonal charge regulation remain elusive so far. In this study, we report the condition-dependent self-assembly of charge-reversible lanthanide-organic tetra-capped octahedral cages, i.e., [Ln6(H3L)4]6+ and [Ln6L4]6-, from a series of lanthanide ions (Ln3+; Ln = Lu, Yb, Eu) and a tritopic tetradentate acylhydrazone ligand (H6L) featuring multiple deprotonation states and propeller conformations. While direct self-assembly under basic conditions produced a mixture of various ΔxΛ6-x-[Ln6L4]6- (x = 0-6) stereoisomers, racemic Δ6- and Λ6-[Ln6L4]6- could be exclusively obtained from the first self-assembly of Δ6- and Λ6-[Ln6(H3L)4]6+ under neutral conditions followed by post-assembly deprotonation. Rich isomerism on the tetra-capped octahedral cages arising from the coupling between the metal-centered Δ/Λ chirality and the ligand conformations has been discussed based on X-ray single-crystal structures of the C3-symmetric Δ3Λ3-Ln6L4 and T-symmetric Δ6/Λ6-Ln6L4 complexes. Host-guest studies confirmed that positively charged rac-Δ6/Λ6-[Ln6(H3L)4]6+ could bind anionic sulfonates, and negatively charged rac-Δ6/Λ6-[Ln6L4]6- exhibited strong encapsulation ability toward ammonium guests, where acid/base-triggered guest uptake/release could be realized taking advantage of the charge reversibility of the cage. Moreover, photophysical studies revealed visible-light-sensitized and guest-encapsulation-enhanced NIR emissions on the rac-Δ6/Λ6-Yb6L4 cage. This work not only enriches the library of functional lanthanide-organic cages but also provides a promising candidate with charge reversibility for the development of smart supramolecular materials.

Water-Soluble Pd6L3 Molecular Bowl for Separation of Phenanthrene from a Mixture of Isomeric Aromatic Hydrocarbons

Phenanthrene is a high-value raw material in chemical industries. Separation of phenanthrene from isomeric anthracene continues to be a big challenge in the industry due to their very similar physical properties. Herein, we report the self-assembly of a water-soluble molecular bowl (TB) from a phenothiazine-based unsymmetrical terapyridyl ligand (L) and a cis-blocked 90° Pd(II) acceptor. TB featured an unusual bowl-like topology, with a wide rim diameter and a hydrophobic inner cavity fenced by the aromatic rings of the ligand. The above-mentioned features of TB allow it to bind polyaromatic hydrocarbons in its confined cavity. TB shows a higher affinity for phenanthrene over its isomer anthracene in water, which enables it to separate phenanthrene with ∼93% purity from an equimolar mixture of phenanthrene and anthracene. TB is also able to extract pyrene with around ∼90% purity from an equimolar mixture of coronene, perylene, and pyrene. Moreover, TB can be reused for several cycles without significant degradation in its performance as an extracting agent. This clean strategy of separation of phenanthrene and pyrene from a mixture of hydrophobic hydrocarbons by aqueous extraction is noteworthy.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Tetramine Aspect Ratio and Flexibility Determine Framework Symmetry for Zn8 L6 Self-Assembled Structures

We derive design principles for the assembly of rectangular tetramines into Zn8 L6 pseudo-cubic coordination cages. Because of the rectangular, as opposed to square, geometry of the ligand panels, and the possibility of either Δ or Λ handedness of each metal center at the eight corners of the pseudo-cube, many different cage diastereomers are possible. Each of the six tetra-aniline subcomponents investigated in this work assembled with zinc(II) and 2-formylpyridine in acetonitrile into a single Zn8 L6 pseudo-cube diastereomer, however. Each product corresponded to one of four diastereomeric configurations, with T, Th , S6 or D3 symmetry. The preferred diastereomer for a given tetra-aniline subcomponent was shown to be dependent on its aspect ratio and conformational flexibility. Analysis of computationally modeled individual faces or whole pseudo-cubes provided insight as to why the observed diastereomers were favored.

Ferrocene-Derived Palladium(II)-Based Metallosupramolecular Structures: Synthesis, Guest Interaction, and Stimulus-Responsiveness Studies

Using ferrocene-based ligand systems, a series of heterobimetallic architectures of the general formula [Pd_mL_n]^x+ were designed with the aim of installing an opening and closing mechanism that would allow the release and binding of guest molecules. Palladium complex formation was achieved through coordination to pyridyl groups, and using 2-, 3-, and 4-pyridyl derivatives provided access to defined PdL, PdL₂, and Pd₂L₄ structures, respectively. The supramolecular complexes were characterized using nuclear magnetic resonance (NMR) and infrared spectroscopy, mass spectrometry, and elemental analysis, and for some examples density functional theory calculations and single-crystal X-ray diffraction analysis. ¹H NMR spectroscopy was used to investigate disassembly and reassembly of the metallosupramolecular structures. The former was induced by cleavage of the relatively labile Pd-N_pyridyl bonds with the introduction of the competing ligands N,N'-dimethylaminopyridine (DMAP) and Cl^- (using tetrabutylammonium chloride) to yield [Pd(DMAP)₄]²⁺ and [PdCl₄]^2-, respectively. The process was found to be reversible for several of the heterodimetallic compounds, with the addition of H⁺ or Ag⁺ triggering complex reassembly. Guest binding studies with several architectures revealed interactions with the anionic guests p-toluenesulfonate and octyl sulfate, but not with neutral molecules. Furthermore, the release of guests was reversibly induced with Cl^- ions as a stimulus.

Switchable metallacycles and metallacages

Two-dimensional metallacycles and three-dimensional metallacages constructed by coordination-driven self-assembly have attracted much attention because they exhibit unique structures and properties and are highly efficient to synthesize. Introduction of switching into supramolecular chemistry systems is a popular strategy, as switching can endow systems with reversible features that are triggered by different stimuli. Through this strategy, novel switchable metallacycles and metallacages were generated, which can be reversibly switched into different stable states with distinct characteristics by external stimuli. Switchable metallacycles and metallacages exhibit versatile structures and reversible properties and are inherently dynamic and respond to artificial signals; thus, these structures have many promising applications in a wide range of fields, such as drug delivery, data processing, pollutant removal, switchable catalysis, smart functional materials, etc. This review focuses on the design of switchable metallacycles and metallacages, their switching behaviours and mechanisms triggered by external stimuli, and the corresponding structural changes and resultant properties and functions.

Light-controlled shape-changing azomacrocycles exhibiting reversible modulation of pyrene fluorescence emission

We report the design, synthesis, and study of light-induced shape-changing azomacrocycles. These systems have been incorporated with azobenzene photoswitches using alkoxy tethers and triazole units to afford flexibility and binding. We envision that such azomacrocycles are capable of reversibly binding with the guest molecule. Remarkably, we have demonstrated fully light-controlled fluorescence quenching and enhancement in the monomeric emission of pyrene (guest). Such modulations have been achieved by the photoisomerization of the azomacrocycle and, in turn, host-guest interactions. Also, the azomacrocycles tend to aggregate and can also be controlled by light or heat. We uncovered such phenomena using spectroscopic, microscopic, and isothermal titration calorimetry (ITC) studies and computations.

Tetraruthenium Macrocycles with Laterally Extended Bis(alkenyl)quinoxaline Ligands and Their F4TCNQ•− Salts

We report on the tetraruthenium macrocycles Ru4-5 and -6 with a π-conjugated pyrene-appended 5,8-divinylquinoxaline ligand and either isophthalate or thiophenyl-2,5-dicarboxylate linkers and their charge-transfer salts formed by oxidation with two equivalents of F4TCNQ. Both macrocyclic complexes were characterized by NMR spectroscopy, mass spectrometry, cyclic and square-wave voltammetry, and by IR, UV–vis–NIR, and EPR spectroscopy in their various oxidation states.

Shape Complementary Coordination Self-Assembly of a Redox-Active Heteroleptic Complex

We present here the coordination self-assembly of a new heteroleptic (bpyPd)₄L¹L₂² coordination complex (1) from one novel pyridinium-functionalized bis-2,4,6-tris(pyridin-3-yl)-1,3,5-triazine (bis-3-TPT, L¹) macrocyclic ligand, two separate 3-TPT (L²) ligands, and four cis-blocking bpyPd(NO₃)₂ (bpy = 2,2'-bipyridine). While homoleptic self-assemblies with either L¹ or L² gave dynamic mixtures of products, a single thermodynamic heteroleptic complex was obtained driven by the shape complementarity of building blocks. Moreover, the redox-active nature of the heteroleptic assembly facilitates the highly efficient catalytic aerobic photo-oxidation of aromatic secondary alcohols under mild conditions.

Computational Modeling of Supramolecular Metallo-organic Cages-Challenges and Opportunities

Self-assembled metallo-organic cages have emerged as promising biomimetic platforms that can encapsulate whole substrates akin to an enzyme active site. Extensive experimental work has enabled access to a variety of structures, with a few notable examples showing catalytic behavior. However, computational investigations of metallo-organic cages are scarce, not least due to the challenges associated with their modeling and the lack of accurate and efficient protocols to evaluate these systems. In this review, we discuss key molecular principles governing the design of functional metallo-organic cages, from the assembly of building blocks through binding and catalysis. For each of these processes, computational protocols will be reviewed, considering their inherent strengths and weaknesses. We will demonstrate that while each approach may have its own specific pitfalls, they can be a powerful tool for rationalizing experimental observables and to guide synthetic efforts. To illustrate this point, we present several examples where modeling has helped to elucidate fundamental principles behind molecular recognition and reactivity. We highlight the importance of combining computational and experimental efforts to speed up supramolecular catalyst design while reducing time and resources.

Beyond Platonic: How to Build Metal-Organic Polyhedra Capable of Binding Low-Symmetry, Information-Rich Molecular Cargoes

The field of metallosupramolecular chemistry has advanced rapidly in recent years. Much work in this area has focused on the formation of hollow self-assembled metal-organic architectures and exploration of the applications of their confined nanospaces. These discrete, soluble structures incorporate metal ions as ‘glue’ to link organic ligands together into polyhedra.Most of the architectures employed thus far have been highly symmetrical, as these have been the easiest to prepare. Such high-symmetry structures contain pseudospherical cavities, and so typically bind roughly spherical guests. Biomolecules and high-value synthetic compounds are rarely isotropic, highly-symmetrical species. To bind, sense, separate, and transform such substrates, new, lower-symmetry, metal-organic cages are needed. Herein we summarize recent approaches, which taken together form the first draft of a handbook for the design of higher-complexity, lower-symmetry, self-assembled metal-organic architectures.

Light-Powered Dissipative Assembly of Diazocine Coordination Cages

Stimuli-responsive coordination cages allow reversible control over guest binding and release, relevant for adaptive receptors, carriers, catalysts, and complex systems. Light serves as an advantageous stimulus, as it can be applied with precise spatial and temporal resolution without producing chemical waste products. We report the first Pd-mediated coordination cage based on ligands embedding a diazocine photoswitch. While the thermodynamically more stable cis-photoisomer sloppily assembles to a mixture of species with general formula [Pd_ncis-L_2n], the less stable trans-isomer yields a defined [Pd₂trans-L₄] cage that reversibly converts back to the cis-system by irradiation at 530 nm or thermal relaxation. The [Pd_ncis-L_2n] species do not bind a given guest; however, [Pd₂trans-L₄] is able to encapsulate a bis-sulfonate as long as it is kept assembled, requiring continuous irradiation at 385 nm. In the absence of UV light, thermal relaxation results in back-switching and guest release. Assembly and properties of the system were characterized by a combination of NMR, ion mobility ESI-MS, single-crystal X-ray diffraction, and UV–vis absorption studies.

Catalytic electron drives host–guest recognition

The reactants of AQH–CH2CN are converted into AQ and CH3CN in sustainable electrocatalytic chain reactions, successfully achieving catalytic electron-triggered charge-transfer (CT) complex formation.

Entropy Versus Enthalpy Controlled Temperature/Redox Dual-Triggered Cages for Selective Anion Encapsulation and Release

New C₃ -symmetric imidazole ligands were designed with phosphine and phosphine oxide linkers (L^P and L^PO , respectively) to demonstrate a dual-triggered dynamic closed coordination cage. Both L^P and L^PO form discrete Zn₄ L₄ -closed cages (1^P and 1^PO , respectively) with excellent selectively for BPh₄ ^- , whereas 1^P and 1^PO encapsulate neither a slightly larger size anion [B(C₆ H₄ CH₃ )₄ ^- ] nor smaller size anions (BF₄ ^- , PF₆ ^- , SbF₆ ^- , and OSO₂ CF₃ ^- ). 1^PO exhibits more negative enthalpy and entropy changes upon anion encapsulation, thus releasing almost all of the encapsulated anions at high temperature (343 K) (trigger 1: BPh₄ ^- ⊂1^PO ← → 1^PO +BPh₄ ^- ). In contrast 1^P has less negative enthalpy and entropy changes, thus preserving the captured anion over a wide range of temperatures (298 K to 343 K). The 1^P cage can be quantitatively oxidized to the 1^PO cage by a mild oxidant (Ox.=H₂ O₂ ), and therefore the captured anion can be released by a redox triggering event (trigger 2: BPh₄ ^- ⊂1^P +Ox.→1^PO +BPh₄ ^- ).

Reversible pH-Controlled Catenation of a Benzobisimidazole-Based Tetranuclear Rectangle

The development of methodologies to control on demand and reversibly supramolecular transformations from self-assembled metalla-structures requires the rational design of architectures able to answer to an applied stimulus. While solvent or concentration changes, light exposure or addition of a chemical have been largely explored to provide these transformations, the case of pH sensitive materials is less described. Herein, we report the first example of a pH-triggered dissociation of a coordination-driven self-assembled interlocked molecular link. It incorporates a pH sensitive benzobisimidazole-based ligand that can be selectively protonated on its bisimidazole moieties. This generates intermolecular electrostatic repulsions that reduces drastically the stability of the interlocked structure, leading to its dissociation without any sign of protonation of the pyridine moieties involved in the coordination bonds. Importantly, the dissociation process is reversible through addition of a base.

Accessing three oxidation states of cobalt in M6L3 nanoprisms with cobalt-porphyrin walls

Nanocages with porphyrin walls are common, but studies of such structures hosting redox-active metals are rare. Pt²⁺-linked M₆L₃ nanoprisms with cobalt-porphyrin walls were prepared and their redox properties were evaluated electrochemically and chemically, leading to the first time that cobalt-porphyrin nanocages have been characterized in Co^I, Co^II, and Co^III states.

Recent advances and perspectives on supramolecular radical cages

Supramolecular radical chemistry has been emerging as a cutting-edge interdisciplinary field of traditional supramolecular chemistry and radical chemistry in recent years. The purpose of such a fundamental research field is to combine traditional supramolecular chemistry and radical chemistry together, and take the benefit of both to eventually create new molecules and materials. Recently, supramolecular radical cages have been becoming one of the most frontier and challenging research focuses in the field of supramolecular chemistry. In this Perspective, we give a brief introduction to organic radical chemistry, supramolecular chemistry, and the emerging supramolecular radical chemistry along with their history and application. Subsequently, we turn to the main part of this topic: supramolecular radical cages. The design and synthesis of supramolecular cages consisting of redox-active building blocks and radical centres are summarized. The host-guest interactions between supramolecular (radical) cages and organic radicals are also surveyed. Some interesting properties and applications of supramolecular radical cages such as their unique spin-spin interactions and intriguing confinement effects in radical-mediated/catalyzed reactions are comprehensively discussed and highlighted in the main text. The purpose of this Perspective is to help students and researchers understand the development of supramolecular radical cages, and potentially to stimulate innovation and creativity and infuse new energy into the fields of traditional supramolecular chemistry and radical chemistry as well as supramolecular radical chemistry.

Uptake, Trapping, and Release of Organometallic Cations by Redox-Active Cationic Hosts

The host-guest chemistry of metal-organic nanocages is typically driven by thermodynamically favorable interactions with their guests such that uptake and release of guests can be controlled by switching this affinity on or off. Herein, we achieve this effect by reducing porphyrin-walled cationic nanoprisms 1a¹²⁺ and 1b¹²⁺ to zwitterionic states that rapidly uptake organometallic cations Cp*₂Co⁺ and Cp₂Co⁺, respectively. Cp*₂Co⁺ binds strongly (K_a = 1.3 × 10³ M^-1) in the neutral state 1a⁰ of host 1a¹²⁺, which has its three porphyrin walls doubly reduced and its six (bipy)Pt²⁺ linkers singly reduced (bipy = 2,2'-bipyridine). The less-reduced states of the host 1a³⁺ and 1a⁹⁺ also bind Cp*₂Co⁺, though with lower affinities. The smaller Cp₂Co⁺ cation binds strongly (K_a = 1.7 × 10³ M^-1) in the 3e^- reduced state 1b⁹⁺ of the (tmeda)Pt²⁺-linked host 1b¹²⁺ (tmeda = N,N,N',N'-tetramethylethylenediamine). Upon reoxidation of the hosts with Ag⁺, the guests become trapped to provide unprecedented metastable cation-in-cation complexes Cp*₂Co⁺@1a¹²⁺ and Cp₂Co⁺@1b¹²⁺ that persist for >1 month. Thus, dramatic kinetic effects reveal a way to confine the guests in thermodynamically unfavorable environments. Experimental and DFT studies indicate that PF₆^- anions kinetically stabilize Cp*₂Co⁺@1a¹²⁺ through electrostatic interactions and by influencing conformational changes of the host that open and close its apertures. However, when Cp*₂Co⁺@1a¹²⁺ was prepared using ferrocenium (Fc⁺) instead of Ag⁺ to reoxidize the host, dissociation was accelerated >200× even though neither Fc⁺ nor Fc have any observable affinity for 1a¹²⁺. This finding shows that metastable host-guest complexes can respond to subtler stimuli than those required to induce guest release from thermodynamically favorable complexes.

A "Pretender" Croconate-Bridged Macrocyclic Tetraruthenium Complex: Sizable Redox Potential Splittings despite Electronically Insulated Divinylphenylene Diruthenium Entities

Careful optimization of the reaction conditions provided access to the particularly small tetraruthenium macrocycle ²Ru₂Ph-Croc, which is composed out of two redox-active divinylphenylene-bridged diruthenium entities {Ru}-1,4-CH=CH-C₆H₄-CH=CH-{Ru} (Ru₂Ph; {Ru} = Ru(CO)Cl(PⁱPr₃)₂) and two likewise redox-active and potentially non-innocent croconate linkers. According to single X-ray diffraction analysis, the central cavity of ²Ru₂Ph-Croc is shielded by the bulky PⁱPr₃ ligands, which come into close contact. Cyclic voltammetry revealed two pairs of split anodic waves in the weakly ion pairing CH₂Cl₂/NBu₄BAr^F₂₄ (BAr^F₂₄ = [B{C₆H₃(CF₃)₂-3,5}₄]⁻ electrolyte, while the third and fourth waves fall together in CH₂Cl₂/NBu₄PF₆. The various oxidized forms were electrogenerated and scrutinized by IR and UV/Vis/NIR spectroscopy. This allowed us to assign the individual oxidations to the metal-organic Ru₂Ph entities within ²Ru₂Ph-Croc, while the croconate ligands remain largely uninvolved. The lack of specific NIR bands that could be assigned to intervalence charge transfer (IVCT) in the mono- and trications indicates that these mixed-valent species are strictly charge-localized. ²Ru₂Ph-Croc is hence an exemplary case, where stepwise IR band shifts and quite sizable redox splittings between consecutive one-electron oxidations would, on first sight, point to electronic coupling, but are exclusively due to electrostatic and inductive effects. This makes ²Ru₂Ph-Croc a true “pretender”.

Periphery Modification of Tetrathiafulvalenes: Recent Development and Applications

Tetrathiafulvalene (TTF) and its analogs are fascinating molecules in materials science based on their excellent electron-donating abilities. This personal account describes recent advances in the synthesis of TTF analogs for functional materials via the palladium-catalyzed modification of peripheries of TTF analogs. We first consider three types of molecules: fluorophore-TTF hybrid molecules, multi-redox systems, and an organic ligand for metal-organic frameworks. These molecules were successfully synthesized via Stille coupling or palladium-catalyzed direct C-H arylation and their structural, electrochemical, and optical properties were clarified. Subsequently, phosphorus-substituted TTF analogs were successfully synthesized for future applications of redox-active phosphine ligands for metal catalysts. The development of these molecules can significantly affect the advancement of chemical science.

A Self-Assembled Homochiral Radical Cage with Paramagnetic Behaviors

Condensation of an inherently C₃ -symmetric polychlorotriphenylmethyl (PTM) radical trisaldehyde with tris(2-aminoethyl)amine (TREN) yields a [4+4] tetrahedral radical cage as a racemic pair of homochiral enantiomers in 75 % isolated yield. The structure was characterized by X-ray crystallography, confirming the homochirality of each cage framework. The homochirality results from intramolecular [CH⋅⋅⋅π] and hydrogen-bonding interactions within the cage framework. The four PTM radicals in a cage undergo weak through-space coupling. Magnetic measurements demonstrated that each cage bears 3.58 spins.

Folding and Unfolding of Acetoxy Group-Terminated Alkyl Chains Inside a Size-Regulable Hemicarcerand

A resorcinarene-based hemicarcerand, which consists of two cavitands covalently linked to each other by four alkyl chains, allows structural expansion and contraction by demetalation and metalation of Cu(I) cations with a size change of approximately 12 Å. This metal-mediated switching of the two states regulates the conformations of acetoxy group-terminated alkyl chains. A guest binding study reveals the encapsulation of heptyl to undecyl chains in metal-free and Cu(I)-coordinated capsules. The chemical shifts of the acetoxy groups of the bound guests are the same in the metal-free capsule, while those in the Cu(I)-coordinated one differ from each other. This indicates that the metal-free capsule regulates its size to the bound guests, while the bound guests adopt their conformations to the cavity of the Cu(I)-coordinated capsules. ¹H NMR measurements and molecular mechanics calculations suggest that the bound guests have extended conformations in the metal-free capsule, while the Cu(I)-coordinated capsule forces the bound guests to adopt folded conformations. The presence of folded conformations is supported by the conformational study with structurally similar capsules and a nonsymmetric guest, allowing us to observe nuclear Overhauser effects stemming from the folded conformations of the guest in the cavity.

Multi-stimuli Control over Assembly and Guest Binding in Metallo-supramolecular Hosts Based on Dithienylethene Photoswitches

It is difficult to assemble multi-component metallo-supramolecular architectures in a non-statistical fashion, which limits their development toward functional materials. Herein, we report a system of interconverting bowls and cages that are able to respond to various selective stimuli (light, ligands, anions), based on the self-assembly of a photochromic dithienylethene (DTE) ligand, L^a, with Pd^II cations. By combining the concept of “coordination sphere engineering”, relying on bulky quinoline donors, with reversible photoswitching between the ligand’s open (o-L^a) and closed (c-L^a) forms, a [Pd₂(o-L^a)₄] cage (o-C) and a [Pd₂(c-L^a)₃] bowl (c-B) were obtained, respectively. This structural rearrangement modulates the system’s guest uptake capabilities. Among three bis-sulfonate guests (G1, G2, and G3), the cage can encapsulate only the smallest (G1), while the bowl binds all of them. Bowl c-B was further used to synthesize a series of heteroleptic cages, [Pd₂L^A₃L^B], representing a motif never reported before. Additional ligands (L^c-f), with short or long arms, tune the cavity size, thus enabling or preventing guest uptake. Addition of Br^–/Ag⁺ makes it possible to change the overall charge, again triggering guest uptake and release, as well as fourth ligand de-/recomplexation. In combination, site-selective introduction of functionality and application of external stimuli lead to an intricate system of hosts with different guest preferences. A high degree of complexity is achieved through cooperativity between only a few components.

Electron-rich Coordination Receptors Based on Tetrathiafulvalene Derivatives: Controlling the Host-Guest Binding

The coordination-driven self-assembly methodology has emerged over the last few decades as an extraordinarily versatile synthetic tool for obtaining discrete macrocyclic or cage structures. Rational approaches using large libraries of ligands and metal complexes have allowed researchers to reach more and more sophisticated discrete structures such as interlocked, chiral, or heteroleptic cages, and some of them are designed for guest binding applications. Efforts have been notably produced in controlling host-guest affinity with, in particular, an evident interest in targeting substrate transportation and subsequent delivering. Recent accomplishments in this direction were described from functional cages which can be addressed with light, pH, or through a chemical exchange. The case of a redox-stimulation has been much less explored. In this case, the charge state of the redox-active cavity can be controlled through an applied electrical potential or introduction of an appropriate oxidizing/reducing chemical agent. Beyond possible applications in electrochemical sensing for environmental and medical sciences as well as for redox catalysis, controlling the cavity charge offers the possibility to modulate the host-guest binding affinity through electrostatic interactions, up to the point of disassembly of the host-guest complex, i.e., releasing of the guest molecule from the host cavity.This Account highlights the key studies that we carried out at Angers, related to discrete redox-active coordination-based architectures (i.e., metalla-rings, -cages, and -tweezers). These species are built upon metal-driven self-assembly between electron-rich ligands, based on the tetrathiafulvalene (TTF) moiety (as well as some of its S-rich derivatives), and various metal complexes. Given the high π-donating character of those ligands, the corresponding host structures exhibit a high electronic density on the cavity panels. This situation is favorable to bind complementary electron-poor guests, as it was illustrated with bis(pyrrolo)tetrathiafulvalene (BPTTF)-based cavities, which exhibit hosting properties for C₆₀ or tetrafluorotetracyanoquinodimethane (TCNQ-F₄). In addition to the pristine tetrathiafulvalene, which was successfully incorporated into palladium- or ruthenium-based architectures, the case of the so-called extended tetrathiafulvalene (exTTF) appears particularly fascinating. A series of related polycationic and neutral M₄L₂ ovoid containers, as well as a M₆L₃ cage, were synthesized, and their respective binding abilities for neutral and anionic guests were studied. Remarkably, such structures allow to control of the binding of the guest upon a redox-stimulation, through two distinctive processes: (i) cage disassembling or (ii) guest displacement. As an extension of this approach, metalla-assembled electron-rich tweezers were designed, which are able to trigger the guest release through an original process based on supramolecular dimerization activated through a redox stimulus. This ensemble of results illustrates the remarkable ability of electron-rich, coordination-based self-assembled cavities to bind various types of guests and, importantly, to trigger their release through a redox-stimulus.

Comparing the self-assembly processes of two redox-active exTTF-based regioisomer ligands

A new exTTF-based ligand was synthesized and its coordination-driven self-assembly behavior with a square planar palladium complex was compared with a previously described regioisomer.

Reversible fluorescence modulation through the photoisomerization of an azobenzene-bridged perylene bisimide cyclophane

An azobenzene-bridged perylene bisimide cyclophane was designed and synthesized, which showed reversible fluorescence intensity switching under light-irradiation due to cooperative adjustments of PBI–PBI and PBI–Azo interactions.

A self-assembled tetrathiafulvalene box

A M₈L₂ metalla-cage constructed through coordination-driven self-assembly from a quinonato bis-ruthenium complex and an electron-rich tetrathiafulvalene (TTF) tetrapyridyl ligand is depicted.

Redox-Active Supramolecular Heteroleptic M4 L2 L'2 Assemblies with Tunable Interior Binding Site

Three Pt4 L2 L'2 heteroleptic rectangles (1-3), containing ditopic redox-active bis-pyridine functionalized perylene bisimide (PBI) ligands PBI-pyr2 (L) are reported. Co-ligand L' is a dicarboxylate spacer of varying length, leading to modified overall size of the assemblies. 1 H NMR spectroscopy reveals a trend in the splitting and upfield chemical shift of the PBI-hydrogens in the rectangles with respect to free PBI, most pronounced with the largest strut length (3) and least with the smallest strut length (1). This is attributed to increased rotational freedom of the PBI-pyr2 ligand over its longitudinal axis (Npy -Npy ), due to increased distance between the PBI-surfaces, which is corroborated by VT-NMR measurements and DFT calculations. The intramolecular motion entails desymmetrization of the two PBI-ligands, in line with cyclic voltammetry (CV) data. The first (overall two-electron) reduction event and re-oxidation for 1 display a subtle peak-to-peak splitting of 60 mV, whilst increased splitting of this event is observed for 2 and 3. The binding of pyrene in 1 is probed to establish proof of concept of host-guest chemistry enabled by the two PBI-motifs. Fitting the binding curve obtained by 1 H NMR titration with a 1:1 complex formation model led to a binding constant of 964±55 m-1 . Pyrene binding is shown to directly influence the redox-chemistry of 1, resulting in a cathodic and anodic shift of approximately 46 mV on the first and second reduction event, respectively.

Oxidation triggers guest dissociation during reorganization of an FeII 4L6 twisted parallelogram

A three-dimensional FeII 4L6 parallelogram was prepared from ferrocene-containing ditopic ligands. The steric preference of the bulky ferrocene cores towards meridional vertex coordination brought about this new structure type, in which the ferrocene units adopt three distinct conformations. The structure possesses two distinct, bowl-like cavities that host anionic guests. Oxidation of the ferrocene FeII to ferrocenium FeIII causes rotation of the ferrocene hinges, converting the structure to an FeII 1L1 + species with release of anionic guests, even though the average charge per iron increases in a way that would ordinarily increase guest binding strength. The degrees of freedom exhibited by these new structures - derived from the different configurations of the three ligands surrounding a meridional FeII center and the rotation of ferrocene cores - thus underpin their ability to reconfigure and eject guests upon oxidation.

Controlled release of the guest molecule via borate formation of a fluorinated boronic ester cage

A boronic ester cage, which exhibits stimuli-responsive guest-release behavior, was constructed by self-assembly of tetrol with the indacene backbone and a fluorine-substituted benzenetriboronic acid derivative. The presence of fluorine substituents made it possible to control the guest release rate using simple amines by forming tetrahedral borates.

How to Control the Rate of Heterogeneous Electron Transfer across the Rim of M6L12 and M12L24 Nanospheres

Catalysis in confined spaces, such as those provided by supramolecular cages, is quickly gaining momentum. It allows for second coordination sphere strategies to control the selectivity and activity of transition metal catalysts, beyond the classical methods like fine-tuning the steric and electronic properties of the coordinating ligands. Only a few electrocatalytic reactions within cages have been reported, and there is no information regarding the electron transfer kinetics and thermodynamics of redox-active species encapsulated into supramolecular assemblies. This contribution revolves around the preparation of M6L12 and larger M12L24 (M = Pd or Pt) nanospheres functionalized with different numbers of redox-active probes encapsulated within their cavity, either in a covalent fashion via different types of linkers (flexible, rigid and conjugated or rigid and nonconjugated) or by supramolecular hydrogen bonding interactions. The redox probes can be addressed by electrochemical electron transfer across the rim of nanospheres, and the thermodynamics and kinetics of this process are described. Our study identifies that the linker type and the number of redox probes within the cage are useful handles to fine-tune the electron transfer rates, paving the way for the encapsulation of electroactive catalysts and electrocatalytic applications of such supramolecular assemblies.

Redox-Responsive Host-Guest Chemistry of a Flexible Cage with Naphthalene Walls

"Naphthocage", a naphthalene-based organic cage, reveals very strong binding (up to 10¹⁰ M^-1) to aromatic (di)cationic guests, i.e., the tetrathiafulvalene mono- and dication and methyl viologen. Intercalation of the guests between two naphthalene walls is mediated by C-H···O, C-H···π, and cation···π interactions. The guests can be switched into and out of the cage by redox processes with high binding selectivity. Oxidation of the flexible cage itself in the absence of a guest leads to a stable radical cation with the oxidized naphthalene intercalated between and stabilized by the other two. Encapsulated guest cations are released from the cavity upon cage oxidation, paving the way to future applications in redox-controlled guest release or novel stimuli-responsive materials.