Organocatalyzed Photocontrolled Radical Polymerization of Semifluorinated (Meth)acrylates Driven by Visible Light

Silver-Mediated ARGET-ATRP of Reactive Acrylates Using TPMANMe2 Ligand: A Universal Strategy for Controlled Copolymerization

A controlled polymerization using activated acrylate monomers via ARGET-ATRP is developed with a tris[(4-dimethylamino pyridyl)methyl]amine ligand to address issues with weaker ligands and monomers that can undergo postpolymerization functionalization. This catalyst system enables the polymerization of N-acryloxy succinimide, fluorinated monomers, and isocyanato ethyl acrylate under controlled homogeneous conditions, ensuring linear molecular-weight growth and low polydispersity. Two block copolymerization strategies produce amphiphilic copolymers with narrow molecular-weight distributions and customizable compositions, allowing for various postpolymerization functionalizations.

Phenanthroline Derived N-Doped Carbon Dots as Robust Metal-Free Photocatalysts for PET-RAFT Polymerization and Polymerization-Induced Self-Assembly

Metal-free organic photocatalysts for photo-mediated reversible deactivation radical polymerization (photo-RDRP) are witnessed to make increasing advancement in the precise synthesis of polymers. However, challenges still exist in the development of high-efficiency and environmentally sustainable carbon dots (CDs)-based organocatalysts. Herein, N-doped CDs derived from phenanthroline derivative (Aphen) are prepared as metal-free photocatalysts for photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The introduction of phenanthroline structure enhances the excited state lifetime of CDs and expands the conjugated length of their internal structure to enable the light-absorption to reach green light region, thereby enhancing photocatalytic activity. The as-designed CDs exhibit unprecedented photocatalytic capacity in photopolymerization even in large-volume reaction (100 mL) with high monomer conversion and narrow polymer dispersity (Mw/Mn < 1.20) under green light. The photocatalytic system is compatible with PET-RAFT polymerization of numerous monomers and the production of high molecular weight polyacrylate (Mn >250 000) with exquisite spatiotemporal control. Above results confirm the potential of CDs as photocatalyst, which has not been achieved with other CDs catalysts used in photo-RDRP. In addition, the construction of fluorescent polymer nanoparticles using CDs as both photocatalyst and phosphor through photoinitiated polymerization-induced self-assembly (Photo-PISA) technology is successfully demonstrated for the first time.

Shake, shear, and grind! - the evolution of mechanoredox polymerization methodology

In the last half decade, mechanoredox catalysis has enabled an entirely new genre of polymerization methodology. In this paradigm, mechanical force, such as ultrasonic cavitation bubble collapse or ball mill grinding, polarizes piezoelectric nanoparticles; the resultant piezopotential drives the redox processes necessary for free- and controlled-radical polymerizations. Since being introduced, evolution of these methods facilitates exploration of mechanistic underpinnings behind key electron-transfer events. Mechanical force has not only been identified as a "greener" alternative to more traditional reaction stimuli (e.g., heat, light) for the synthesis of commodity polymers, but also a potential technology to enable the production of novel thermoplastic and thermoset materials that are either challenging, or even impossible, to access using conventional solution-state approaches. In this Feature Article, significant contributions to such methods are highlighted within. Advances and ongoing challenges in both ultrasound and ball milling driven reactions for radical polymerization and crosslinking are identified and discussed.

Visible Light Photoiniferter Polymerization for Dispersity Control in High Molecular Weight Polymers

The synthesis of polymers with high molecular weights, controlled sequence, and tunable dispersities remains a challenge. A simple and effective visible-light controlled photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization is reported here to realize this goal. Key to this strategy is the use of switchable RAFT agents (SRAs) to tune polymerization activities coupled with the inherent highly living nature of photoiniferter RAFT polymerization. The polymerization activities of SRAs were in situ adjusted by the addition of acid. In addition to a switchable chain-transfer coefficient, photolysis and polymerization kinetic studies revealed that neutral and protonated SRAs showed different photolysis and polymerization rates, which is unique to photoiniferter RAFT polymerization in terms of dispersity control. This strategy features no catalyst, no exogenous radical source, temporal regulation by visible light, and tunable dispersities in the unprecedented high molecular weight regime (up to 500 kg mol-1 ). Pentablock copolymers with three different dispersity combinations were also synthesized, highlighting that the highly living nature was maintained even for blocks with large dispersities. Tg was lowered for high-dispersity polymers of similar MWs due to the existence of more low-MW polymers. This strategy holds great potential for the synthesis of advanced materials with controlled molecular weight, dispersity and sequence.

Controlled Radical Copolymerization toward Well-Defined Fluoropolymers

In the past 80 years, fluoropolymers have found broad applications in both industrial and academic settings, owing to their unique physicochemical properties. Copolymerizations of fluoroalkene feedstocks present an important avenue to obtain high-performance materials by merging intrinsic attributes of fluorocarbons and great versatility of comonomers. Recently, while massive investigations have disclosed the great potentials of precisely synthesized polymers, researchers have made considerable efforts to approach well-defined fluorinated copolymers. This minireview discusses challenges in controlled radical copolymerizations (CRCPs) of fluoroalkenes and provides a concise perspective on recent progress in CRCPs of fluoroalkenes (e.g., tetrafluoroethylene, chlorotrifluoroethylene, hexafluoropropene, perfluoroalkyl vinyl ethers) with non-fluorinated vinyl comonomers, which have enabled on-demand preparations of various main-chain fluoropolymers with predefined molar masses, low dispersities, as well as regulable chemical compositions and sequences. The synthetic advantages of CRCPs will promote controlled and facile access to customized fluoropolymers for high-tech applications such as batteries, coatings and so on.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Amine-catalyzed Synthesis of Fluorine-containing Polymers through Halogen Bonding

Fluorine-containing polymers are one of the most useful materials among various polymers. In this study, we have developed synthesis methods for fluorine-containing polymers through sequential and chain polymerization based on the generation of perfluoroalkyl radicals by photoirradiation halogen bonding of perfluoroalkyl iodide and amines. In sequential polymerization, fluoroalkyl-alkyl-alternating polymers were synthesized by the polyaddition of diene and diiodoperfluoroalkane. In chain polymerization, polymers with perfluoroalkyl terminals were synthesized by polymerization of general-purpose monomers, with perfluoroalkyl iodide as the initiating species. Block polymers were also synthesized by successive chain polymerization to the polyaddition product.

Mechanoredox Catalysis Enables a Sustainable and Versatile Reversible Addition-Fragmentation Chain Transfer Polymerization Process

The sustainable synthesis of macromolecules with control over sequence and molar mass remains a challenge in polymer chemistry. By coupling mechanochemistry and electron-transfer processes (i.e., mechanoredox catalysis), an energy-conscious controlled radical polymerization methodology is realized. This work explores an efficient mechanoredox reversible addition-fragmentation chain transfer (RAFT) polymerization process using mechanical stimuli by implementing piezoelectric barium titanate and a diaryliodonium initiator with minimal solvent usage. This mechanoredox RAFT process demonstrates exquisite control over poly(meth)acrylate dispersity and chain length while also showcasing an alternative to the solution-state synthesis of semifluorinated polymers that typically utilize exotic solvents and/or reagents. This chemistry will find utility in the sustainable development of materials across the energy, biomedical, and engineering communities.

Cyclic Hypervalent Iodine-Induced Oxidative Phenol and Aniline Couplings with Phenothiazines

C-H/N-H bond functionalization for direct intermolecular aryl C-N couplings is a useful synthetic process. In this study, we achieved metal-free cross-dehydrogenative coupling of phenols and anilines with phenothiazines using hypervalent iodine reagents. This method affords selective amination products under mild conditions. Electron-rich phenols and anilines could be employed, affording moderate-to-high yields of N-arylphenothiazines. Aniline amination proceeded efficiently at 20 °C, a previously unreported phenomenon.

Synthetic Efforts to Investigate the Effect of Planarizing the Triarylamine Geometry in Dyes for Dye-Sensitized Solar Cells

The geometry of a dye for dye-sensitized solar cells (DSSCs) has a major impact on its optical and electronic properties. The dye structure also dictates the packing properties and how well the dye insulates the metal-oxide surface from oxidants in the electrolyte. The aim of this work is to investigate the effect of planarizing the geometry of the common triarylamine donor, frequently used in dyes for DSSC. Five novel dyes were designed and prepared; two employ conventional triarylamine donors with thiophene and furan π-spacers, two dyes have had their donors planarized through one sulfur bridge (making two distinct phenothiazine motifs), and the final dye has been planarized by forming a double phenoxazine. The synthesis of these model dyes proved to be quite challenging, and each required specially designed total syntheses. We demonstrate that the planarization of the triarylamine donor can have different effects. When planarization was achieved by a 3,7-phenothiazine and double phenoxazine structures, improved absorption properties were noted, and a panchromatic absorption was achieved by the latter. However, an incorrect linking of donor and acceptor moieties has the opposite effect. Further, electrochemical impedance spectroscopy revealed clear differences in charge recombination depending on the structure of the dye. A drawback of planarized dyes in relation to DSSC is their low oxidation potentials. The best photovoltaic performance was achieved by 3,7-phenothazine with furan as a π-spacer, which produces a power conversion efficiency of 5.2% (J _sc = 8.8 mA cm^-2, V _oc = 838 mV, FF = 0.70).

Iron-Catalyzed Oxidative C-O and C-N Coupling Reactions Using Air as Sole Oxidant

We describe the oxygenation of tertiary arylamines, and the amination of tertiary arylamines and phenols. The key step of these coupling reactions is an iron-catalyzed oxidative C-O or C-N bond formation which generally provides the corresponding products in high yields and with excellent regioselectivity. The transformations are accomplished using hexadecafluorophthalocyanine-iron(II) (FePcF16 ) as catalyst in the presence of an acid or a base additive and require only ambient air as sole oxidant.

RAFT Polymerization of Semifluorinated Monomers Mediated by a NIR Fluorinated Photocatalyst

Near-infrared (NIR) light plays an increasingly important role in the field of photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization due to its unique properties. Yet, the NIR photocatalyst with good stability for PET-RAFT polymerization remains promising. Here, a strategy of NIR PET-RAFT polymerization of semifluorinated monomers using fluorophenyl bacteriochlorin as a photocatalyst with strong absorption at the NIR light region (710-780 nm) is reported. In which, the F atoms are used to modify reduced tetraphenylporphyrin structure with enhanced photostability of photocatalyst. Under the irradiation of NIR light (λ_max = 740 nm), the PET-RAFT polymerization of semifluorinated methylacrylic monomers presents living/control characteristics and temporal modulation. By the PET-RAFT polymerization-induced self-assembly (PISA) strategy, stable fluorine-containing micelles are constructed in various solvents. In addition, the fluorinated hydrophobic surface is fabricated via a surface-initiated PET-RAFT (SI-PET-RAFT) polymerization using silicon wafer bearing RAFT agents with tunable surface hydrophobicity. This strategy not only enlightens the application of further modified compounds based on porphyrin structure in photopolymerization, but also shows promising potential for the construction of well-defined functional fluoropolymers.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

Organocatalytic PET-RAFT polymerization with a low ppm of organic photocatalyst under visible light

The development of light-mediated controlled radical polymerization has benefited from the discovery of novel photocatalysts, which could allow precise light control over the polymerization process and the production of well-defined polymers.

Highly Stretchable, Fast Self-Healing, and Waterproof Fluorinated Copolymer Ionogels with Selectively Enriched Ionic Liquids for Human-Motion Detection

The development of waterproof ionogels with high stretchability and fast self-healing performance is essential for stretchable ionic conductors in sophisticated skin-inspired wearable sensors but can be rarely met in one material. Herein, a semicrystalline fluorinated copolymer ionogel (SFCI) with extremely high stretchability, underwater stability, and fast self-healability was fabricated, among which hydrophobic ionic liquids ([BMIM][TFSI]) were selectively enriched in fluoroacrylate segment domains of the fluorinated copolymer matrix through unique ion-dipole interactions. Benefiting from the reversible ion-dipole interactions between the [BMIM][TFSI] and fluoroacrylate segment domains as well as the physical cross-linking effects of semicrystalline oligoethylene glycol domains, the SFCI exhibited ultrastretchability (>6000%), fast room-temperature self-healability (>96% healing efficiency after cutting and self-healing for 30 min), and outstanding elasticity. In addition, the representative SFCI also exhibited high-temperature tolerance up to 300 °C, antifreezing performance as low as -35 °C, and high transparency (>93% visible-light transmittance). As a result, the as-obtained SFCI can readily be used as a highly stretchable ionic conductor in skin-inspired wearable sensors with waterproof performance for real-time detecting physiological human activities. These attractive features illustrate that the developed ultrastretchable and rapidly self-healable ionogels with unique waterproofness are promising candidates especially for sophisticated wearable strain sensing applications in complex and extreme environments.

Electrochemical phenothiazination of naphthylamines and its application in photocatalysis

N-Phenylphenothiazine as an inexpensive, highly reductive and oxygen tolerant organophotocatalyst has exhibited potential in various challenging photochemical transformations. Here we report a general and straightforward method to access structurally diverse N-phenylphenothiazine derivatives by means of a novel electrochemical tool. The introduction of a 2-naphthylamine moiety with an extended π-system and an amine group led to the variation of spectral characterization. Photochemical verification experiments demonstrated that the formed N-arylation products with good efficacy and chemo/site-control displayed competitive catalytic activity in challenging transformations.

Persistent Water Repellency of Syndiotactic Polymethylene with Perfluoroethyl Hexyloxycarbonyl Side Chains

Polyacrylates bearing long fluoroalkyl (Rf) side chains are known to have ultralow surface energies that are appropriate for functional coating and fabric finishing. However, these long Rf chains cause health concerns because of the risk of toxic and bioaccumulative perfluoroalcanoic acid emission via oxidative degradation. This work demonstrates that incorporating a short Rf chain of perfluoroethylene at the end of the side chains of syndiotactic poly(substituted methylene) (PM) produces hydrophobicity. A contact angle of 105° of PM remains constant for more than 50 s, whereas that of the polyacrylate (PA) with the same side chain rapidly decreases from 85° to 44° over the same period. Such persistent water repellency of the PM is ascribed to a liquid crystal structure comprised the main chains arranged in a 2D hexagonal lattice and side chains that extend perpendicularly from these main chains.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Metal-Free Organocatalyzed Atom Transfer Radical Polymerization: Synthesis, Applications, and Future Perspectives

Reversible deactivation radical polymerization (RDRP) is a class of powerful techniques capable of synthesizing polymers with a well-defined structure, properties, and functionalities. Among the available RDRPs, ATRP is the most investigated. However, the necessity of a metal catalyst represents a drawback and limits its use for some applications. O-ATRP emerged as an alternative to traditional ATRP that uses organic compounds that catalyze polymerization under light irradiation instead of metal. The friendly nature and the robustness of O-ATRP allow its use in the synthesis of tailorable advanced materials with unique properties. In this review, the fundamental aspects of the reductive and oxidative quenching mechanism of O-ATRP are provided, as well as insights into each component and its role in the reaction. Besides, the breakthrough recent studies that applied O-ATRP for the synthesis of functional materials are presented, which illustrate the significant potential and impact of this technique across diverse fields.

Enhancing the efficiency of semiconducting quantum dot photocatalyzed atom transfer radical polymerization by ligand shell engineering

Manipulating the ligand shell of semiconducting quantum dots (QDs) has proven to be a promising strategy to enhance their photocatalytic performance for small molecule transformations, such as H₂ evolution and CO₂ reduction. However, ligand-controlled catalysis for macromolecules, which differ from small molecules in penetrability and charge transfer behavior due to their bulky sizes, still remains undiscovered. Here, we systematically investigate the role of surface ligands in the photocatalytic performance of cadmium selenide (CdSe) QDs in light-induced atom transfer radical polymerization (ATRP) by using thiol-based ligands with various polarities and chain lengths. A highly enhanced polymerization efficiency was observed when 3-mercapto propionic acid (MPA), a short-chain and polar ligand, was used to modify the CdSe QDs' surface, achieving high chain-end fidelity, good temporal control, and a dispersity of 1.18, while also tolerating a wide-range of functional monomers ranging from acrylates to methacrylates and fluorinated monomers. Transient absorption spectroscopy and time-resolved photoluminescence studies reveal interesting mechanistic details of electron and hole transfers from the excited QDs to the initiators and 3-MPA capping ligands, respectively, providing key mechanistic insight of these ligand controlled and QD photocatalyzed ATRP processes. The thiolate ligands were found to serve as an efficient hole acceptor for QDs, which facilitates the formation of a charge-separated state, followed by electron transfer from the conduction band edge to initiators and ultimately suppressing charge recombination within the QD.

Synthesis of Polymer Brushes Via SI-PET-RAFT for Photodynamic Inactivation of Bacteria

Biofilms are a persistent issue in healthcare and industry. Once formed, the eradication of biofilms is challenging as the extracellular polymeric matrix provides protection against harsh environmental conditions and physically enhances resistance to antimicrobials. The fabrication of polymer brush coatings provides a versatile approach to modify the surface to resist the formation of biofilms. Herein, the authors report a facile synthetic route for the preparation of surface-tethered polymeric brushes with antifouling and visible light activated bactericidal properties using surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT). Bactericidal property via the generation of singlet oxygen, which can be temporally and spatially controlled, is investigated against both Gram-positive and Gram-negative bacteria. In addition, the antibacterial properties of the surface can be recycled. This work paves the way for the preparation of polymer films that can resist and kill bacterial biofilms.

How does the single unit monomer insertion technique promote kinetic analysis of activation and initiation in photo-RAFT processes?

The single unit monomer insertion technique provides a simple platform for the kinetic investigation of early stage of photo-RAFT process that comprises photo-activation of initial RAFT agents and addition of RAFT leaving radicals to the monomers.

Fluoropolymers in biomedical applications: state-of-the-art and future perspectives

Biomedical applications of fluoropolymers in gene delivery, protein delivery, drug delivery, ¹⁹F MRI, PDT, anti-fouling, anti-bacterial, cell culture, and tissue engineering.

Recent developments in pre-treatment and analytical techniques for synthetic polymers by MALDI-TOF mass spectrometry

A great deal of effort has been expended to develop accurate means of determining the properties of synthetic polymers using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). Many studies have focused on the importance of sample pre-treatment to obtain accurate analysis results. This review discusses the history of synthetic polymer characterization and highlights several applications of MALDI-TOF MS that recognize the importance of pre-treatment technologies. The subject area is of significance in the field of analytical chemistry, especially for users of the MALDI technique. Since the 2000s, many such technologies have been developed that feature improved methods and conditions, including solvent-free systems. In addition, the recent diversification of matrix types and the development of carbon-based matrix materials are described herein together with the current status and future directions of MALDI-TOF MS hardware and software development. We provide a summary of processes used for obtaining the best analytical results with synthetic polymeric materials using MALDI-TOF MS.

Achieving Ultrahigh Molecular Weights with Diverse Architectures for Unconjugated Monomers through Oxygen-Tolerant Photoenzymatic RAFT Polymerization

Achieving well-defined polymers with ultrahigh molecular weight (UHMW) is an enduring pursuit in the field of reversible deactivation radical polymerization. Synthetic protocols have been successfully developed to achieve UHMWs with low dispersities exclusively from conjugated monomers while no polymerization of unconjugated monomers has provided the same level of control. Herein, an oxygen-tolerant photoenzymatic RAFT (reversible addition-fragmentation chain transfer) polymerization was exploited to tackle this challenge for unconjugated monomers at 10 °C, enabling facile synthesis of well-defined, linear and star polymers with near-quantitative conversions, unprecedented UHMWs and low dispersities. The exquisite level of control over composition, MW and architecture, coupled with operational ease, mild conditions and environmental friendliness, broadens the monomer scope to include unconjugated monomers, and to achieve previously inaccessible low-dispersity UHMWs.

Concatenating Suzuki Arylation and Buchwald-Hartwig Amination by A Sequentially Pd-Catalyzed One-Pot Process-Consecutive Three-Component Synthesis of C,N-Diarylated Heterocycles

The concatenation of Suzuki coupling and Buchwald‐Hartwig amination in a consecutive multicomponent reaction opens a concise, modular and efficient one‐pot approach to diversely functionalized heterocycles, as exemplified for 3,10‐diaryl 10H‐phenothiazines, 3,9‐diaryl 9H‐carbazoles, and 1,5‐diaryl 1H‐indoles, in high yields starting from simple staring materials. Moreover, this one‐pot reaction is a sequentially palladium‐catalyzed process that does not require additional catalyst loading after the first coupling step.

Fluorous-Core Nanoparticle-Embedded Hydrogel Synthesized via Tandem Photo-Controlled Radical Polymerization: Facilitating the Separation of Perfluorinated Alkyl Substances from Water

Per- and polyfluorinated alkyl substances (PFASs) are broadly used as surfactants and water/oil repellents for many decades. However, they are toxic, environmental persistence, and widely detected in water sources. In this work, we developed a fluorous-core nanoparticle-embedded hydrogel (FCH) synthesized by the metal-free tandem photocontrolled radical polymerization under visible-light irradiation. With the FCH material, the scope of absorbable PFASs has been expanded to neutral, anionic, cationic and zwitterionic PFASs with the same adsorbent for the first time. The fluorous nanoparticles exhibited strong and selective affinity toward PFASs without being dramatically influenced by pH levels and background ions, enabling efficient removing of PFASs at high to environmentally relevant concentrations (10 mg/L to 1 μg/L). Furthermore, the FCH network has shown good mechanical performance, facilitating the separation, regeneration, and recycling of adsorbent for multiple runs. These results demonstrate the promise of the FCH material for PFASs separation and adsorbent recycling toward sustainable environment.

Cu(II)-Catalyzed Ortho C(sp2)-H Diarylamination of Arylamines To Synthesize Triarylamines

A copper-catalyzed, directed ortho C-H diarylamination of indoles, indolines, anilines, and N-aryl-7-azaindoles has been established. Only copper salt as the catalyst and oxygen as the terminal oxidant are used to synthesize triarylamines using various diarylamines including carbazole and phenothiazine. Mechanistic interrogation reveals that copper plays a dual role.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Visible Light Catalyzed Step-Growth Polymerization through Mizoroki-Heck Coupling Reaction

The results of polymer synthesis via visible light (blue light λ = 465 nm) and a Pd-catalyzed Mizoroki-Heck coupling reaction at ambient temperature are reported. The kinetic study demonstrates that the polymerization rate is faster under light irradiation than that in the dark, affording larger molecular weight of polymer product in the former. A mechanistic study using ¹⁹ F NMR indicates that light can activate the oxidative addition step, increasing the rate of formation of the oxidative addition intermediate. The present work not only reveals a new mechanism of light's effect on Mizoroki-Heck coupling reaction in the absence of sensitizer, but also represents the first example of its application in step-growth polymerization.

Photocontrolled Iodine-Mediated Reversible-Deactivation Radical Polymerization: Solution Polymerization of Methacrylates by Irradiation with NIR LED Light

Herein, near-infrared (NIR) photocontrolled iodide-mediated reversible-deactivation radical polymerization (RDRP) of methacrylates, without an external photocatalyst, was developed using an alkyl iodide (e.g., 2-iodo-2-methylpropionitrile) as the initiator at room temperature. This example is the first use of a series of special solvents containing carbonyl groups (e.g., 1,3-dimethyl-2-imidazolidinone) as both solvent and catalyst for photocontrolled RDRP using long-wavelength (λ_max =730 nm) irradiation. The polymerization system comprises monomer, alkyl iodide initiator, and solvent. Well-defined polymers were synthesized with excellent control over the molecular weights and molecular weight distributions (M_w /M_n <1.21). The living features of this system were confirmed by polymerization kinetics, multiple controlled "on-off" light switching cycles, and chain extension experiments. Importantly, the polymerizations proceeded successfully with various barriers (pork skin and A4 paper), demonstrating the advantage of high-penetration NIR light.

Polymerizations in Continuous Flow: Recent Advances in the Synthesis of Diverse Polymeric Materials

The number of reports using continuous flow technology in tubular reactors to perform precision polymerizations has grown enormously in recent years. Flow polymerizations allow highly efficient preparation of polymers exhibiting well-defined molecular characteristics, and has been applied to a slew of monomers and various polymerization mechanisms, including anionic, cationic, radical, and ring-opening. Polymerization conducted in continuous flow offers several distinct advantages, including improved efficiency, reproducibility, and enhanced safety for exothermic polymerizations using highly toxic components, high pressures, and high temperatures. The further development of this technology is thus of relevance for many industrial polymerization processes. While much progress has been demonstrated in recent years, opportunities remain for increasing the compositional and architectural complexity of polymeric materials synthesized in a continuous fashion. Extending the reactor processing principles that have heretofore been focused on optimizing homopolymerization to include multisegment block copolymers, particularly from monomers that propagate via incompatible mechanisms, represents a major challenge and coveted target for continuous flow polymerization. Likewise, the spatial and temporal control of reactivity afforded by flow chemistry has and will continue to enable the production of complex polymeric architectures. This Viewpoint offers a brief background of continuous flow polymerization focused primarily on tubular (micro)reactors and includes selected examples that are relevant to these specific developments.