Engineering Fast Ion Conduction and Selective Cation Channels for a High-Rate and High-Voltage Hybrid Aqueous Battery

Potassium-Hydrogen Hybrid Ion Alkaline Battery: A New Rechargeable Aqueous Battery Combined a K+ Storage Cathode and an Electrochemical Hydrogen Storage Anode

A rechargeable aqueous hybrid ion alkaline battery, using a proton and a potassium ion as charge carriers for the anode and cathode, respectively, is proposed in this study by using well-developed potassium nickel hexacyanoferrate as the cathode material and mesoporous carbon sheets as the anode material, respectively. The constructed battery operates in a concentrated KOH solution, in which the energy storage mechanism for potassium nickel hexacyanoferrate involves the redox reaction of Fe2+/Fe3+ associated with potassium ion insertion/extraction and the redox reaction of Ni(OH)2/NiOOH. The mechanism for the carbon anode is electrochemical hydrogen storage. The cathode made of potassium nickel hexacyanoferrate exhibits both an ultrahigh capacity of 232.7 mAh g-1 under 100 mA g-1 and a consistent performance of 214 mAh g-1 at 2000 mA g-1 (with a capacity retention of 92.8% after 200 cycles). The mesoporous carbon sheet anode exhibits a capacity of 87.6 mAh·g-1 at 100 mA g-1 with a good rate and cyclic performance. The full cell provides an operational voltage of 1.55 V, a capacity of 93.6 mAh g-1 at 100 mA g-1, and 82.4% capacity retention after 1000 cycles at 2000 mA g-1 along with a low self-discharge rate. The investigation and discussion about the energy storage mechanisms for both electrode materials are also provided.

Carbonate Ester-Based Electrolyte Enabling Rechargeable Zn Battery to Achieve High Voltage and High Zn Utilization

Owing to the high H2O activity, the aqueous electrolyte in the Zn battery exhibits a narrow electrochemical window and inevitable hydrogen evolution reaction, limiting the anode utilization ratio and performance at high voltage. Carbonate ester, the well-developed electrolyte solvent in Li-ion batteries, exhibits aprotic properties and high anodic stability. However, its use in Zn metal batteries is limited due to the low solubility of Zn salts in carbonate esters. Herein, we propose a carbonate ester-based electrolyte (EC:DMC:EMC = 1:1:1 wt %), which contains a new Zn salt (Zn(BHFip)2) characterized by low cost, easy synthesis, and excellent aprotic solvent solubility. The BHFip- anion assists in forming Zn2+ conductive SEI on the anode and decomposes at high voltage to generate a protective CEI layer on the cathode. The Zn//Zn symmetric cell using such electrolyte achieves a remarkable Zn utilization ratio of 91% for 125 h, which has rarely been reported before. Furthermore, the Zn//LiMn2O4 full cell with an average operation voltage of 1.7 V demonstrates reliable cycling for 135 cycles with an N/P ratio of 1:1. In addition, the Zn//LiNi0.5Mn1.5O4 full cell exhibits a high discharge median voltage exceeding 2.2 V for 280 cycles, with the high voltage plateau (above 2 V) constituting 82% of the total capacity.

Fabrication of a Cation Exchange Membrane with Largely Reduced Anion Permeability for Advanced Aqueous K-ion Battery in an Alkaline-Neutral Electrolyte Decoupling System

Herein, an efficient method to prepare sulfonated polyether ether ketone (SPEEK) based cation exchange membranes (CEMs) is developed, where polyethersulfone (PES) is used as an additive. The optimized membrane of 30 wt.%PES/SPEEK-M exhibits a rather low anion permeability and a high ionic conductivity of 9.52 mS cm^-1 together with low volume swelling in water. Meanwhile, tensile strength of the membrane is as high as 31.4 MPa with a tensile strain of 162%. As separators for aqueous K-ion batteries (AKIBs) with decoupled gel electrolytes (Zn anode in alkaline and Prussian blue (FeHCF) cathode in neutral). Discharge voltage of the AKIB can reach 2.3 V. Meanwhile, Zn dendrites can be effectively suppressed in the gel anolyte. Specific capacities of the FeHCF cathode are 116.7 mAh g^-1 at 0.3 A g^-1 (close to its theoretical value), and 95.0 mAh g^-1 at 1.0 A g^-1 , indicating good rate performance. Capacity retention of the cathode is as high as 91.2% after 1000 cycles' cycling owing to the well remained neutral environment of the catholyte. There is almost no pH change for the catholyte after cycling, indicating good anion-blocking or cation-selecting ability of the 30 wt.%PES/SPEEK-M, much better than other membranes.

Bidirectional Interface Protection of a Concentrated Electrolyte, Enabling High-Voltage and Long-Life Aqueous Zn Hybrid-Ion Batteries

Prussian blue analogues (PBAs) as a promising high-voltage cathode material for aqueous zinc-ion batteries (ZIBs) are usually subjected to an ephemeral lifespan and low Coulombic efficiency due to the irreversible phase change and high Zn²⁺ insertion potential. Besides, Zn dendrites, H₂ evolution reaction, and corrosion derived from a Zn anode interface remain huge challenges. Given this, a highly stable zinc hexacyanoferrate (KZnHCF) cathode together with a mixed concentrated electrolyte is prepared to realize a high-voltage and long-life aqueous ZIB, in which the mixed concentrated electrolyte consisting of 30 m KFSI + 1 m Zn(CF₃SO₃)₂ possesses a unique Zn²⁺ solvation sheath (Zn(CF₃SO₃)_0.3(FSI)_3.1(H₂O)_2.6) that can not only stabilize the cathode interface and improve the Coulombic efficiency but also fundamentally solve the Zn anode interface issues. As a result, the aqueous KZnHCF/Zn battery achieves an ultralong life over 3000 cycles without any capacity decay even under a high discharge voltage of 1.78 V (vs Zn²⁺/Zn). Such extraordinary performance represents significant progress in aqueous PBA-based ZIBs. This work shares guidance to improve the performance of aqueous ZIBs through optimizing the electrolyte in tuning the stable operation of the cathode and the zinc anode.

Biomolecular Regulation of Zinc Deposition to Achieve Ultra-Long Life and High-Rate Zn Metal Anodes

Aqueous zinc-ion batteries (ZIBs) have been extensively studied due to their inherent safety and high energy density for large-scale energy storage. However, the practical application is significantly limited by the growing Zn dendrites on metallic Zn anode during cycling. Herein, an environmental biomolecular electrolyte additive, fibroin (FI), is proposed to guide the homogeneous Zn deposition and stabilize Zn anode. This work demonstrates that the FI molecules with abundant electron-rich groups (NH, OH, and CO) can anchor on Zn anode surface to provide more nucleation sites and suppress the side reactions, and the strong interaction with water molecules can simultaneously regulate the Zn²⁺ coordination environment facilitating the uniform deposition of Zn. As a consequence, only 0.5 wt% FI additive enables a highly reversible Zn plating/stripping over 4000 h at 1 mA cm^-2 , indicating a sufficient advance in performance over state-of-the-art Zn anodes. Furthermore, when applied to a full battery (NaVO/Zn), the cell exhibits excellent capacity retention of 98.4% after 1000 cycles as well as high Coulombic efficiency of 99%, whereas the cell only operates for 68 cycles without FI additive. This work offers a non-toxic, low-cost, effective additive strategy to solve dendrites problems and achieve long-life and high-performance rechargeable aqueous ZIBs.

Iron phosphate hydroxide hydrate as a novel anode material for advanced aqueous full potassium-ion batteries

The development of aqueous potassium-ion batteries is limited by the lack of suitable anode materials. Here, a novel anode material, iron phosphate hydroxide hydrate Fe_1.19PO₄(OH)_0.18(H₂O)_0.3, was introduced and synthesized, which delivers considerable reversible capacities of 80 mA h g^-1 at 0.05 A g^-1. An aqueous full potassium-ion battery assembled with the K₂Zn₃(Fe(CN)₆)₂ cathode exhibits 80% capacity retention after 1000 cycles.

Fast Ionic Storage in Aqueous Rechargeable Batteries: From Fundamentals to Applications

The highly dynamic nature of grid-scale energy systems necessitates fast kinetics in energy storage and conversion systems. Rechargeable aqueous batteries are a promising energy-storage solution for renewable-energy grids as the ionic diffusivity in aqueous electrolytes can be up to 1-2 orders of magnitude higher than in organic systems, in addition to being highly safe and low cost. Recent research in this regard has focussed on developing suitable electrode materials for fast ionic storage in aqueous electrolytes. In this review, breakthroughs in the field of fast ionic storage in aqueous battery materials, and 1D/2D/3D and over-3D-tunnel materials are summarized, and tunnels in over-3D materials are not oriented in any direction in particular. Various materials with different tunnel sizes are developed to be suitable for the different ionic radii of Li⁺ , Na⁺ , K⁺ , H⁺ , NH₄ ⁺ , and Zn²⁺ , which show significant differences in the reaction kinetics of ionic storage. New topochemical paths for ion insertion/extraction, which provide superfast ionic storage, are also discussed.

Supramolecular Cation-π Interaction Enhances Molecular Solar Thermal Fuel

Molecular solar thermal fuels (MOSTs), especially azobenzene-based MOSTs (Azo-MOSTs), have been considered as ideal energy-storage and conversion systems in outer or confined space because of their "closed loop" properties. However, there are two main obstacles existing in practical applications of Azo-MOSTs: the solvent-assistant charging process and the high molar extinction coefficient of chromophores, which are both closely related to the π-π stacking. Here, we report one efficient strategy to improve the energy density by introducing a supramolecular "cation-π" interaction into one phase-changeable Azo-MOST system. The energy density is increased by 24.7% (from 164.3 to 204.9 J/g) in Azo-MOST with a small loading amount of cation (2.0 mol %). Upon light triggering, the cation-π-enhanced Azo-MOST demonstrates one gravimetric energy density of about 56.9 W h/kg and a temperature increase of 8 °C in ambient conditions. Then the enhanced mechanism is revealed in both molecular and crystalline scales. This work demonstrates the huge potential of supramolecular interaction in the development of Azo-MOST systems, which could not only provide a universal method for enhancing the energy density of solar energy storage but also balance the conflicts between molecular design and the condensed state for phase-changeable materials.

Construction of Co-Mn Prussian Blue Analog Hollow Spheres for Efficient Aqueous Zn-ion Batteries

Prussian blue analogs (PBAs) are considered as reliable and promising cathode materials for aqueous Zn-ion batteries (AZIBs), but they suffer from low capacity and poor cycling stability due to insufficient active sites and structural damage caused by the ion insertion/extraction processes. Herein, a template-engaged ion exchange approach has been developed for the synthesis of Co-substituted Mn-rich PBA hollow spheres (CoMn-PBA HSs) as cathode materials for AZIBs. Benefiting from the multiple advantageous features including hollow structure, abundant active sites, fast Zn2+ ion diffusion, and partial Co substitution, the CoMn-PBA HSs electrode shows efficient zinc ion storage properties in terms of high capacity, decent rate capability and prolonged cycle life.

[10]CPP-Based Inclusion Complexes of Charged Fulleropyrrolidines. Effect of the Charge Location on the Photoinduced Electron Transfer

A number of non-covalently bound donor-acceptor dyads, consisting of C₆₀ as the electron acceptor and cycloparaphenylene (CPP) as the electron donor, have been reported. A hypsochromic shift of the charge transfer (CT) band in polar medium has been found in [10]CPP⊃Li⁺ @C₆₀ . To explore this anomalous effect, we study inclusion complexes [10]CPP⊃Li⁺ @C₆₀ -MP, [10]CPP⊃C₆₀ -MPH⁺ , and [10]CPP⊃C₆₀ -PPyMe⁺ formed by fulleropyrrolidine derivatives and [10]CPP using the DFT/TDDFT approach. We show that the introduction of a positively charged fragment into fullerene stabilizes CT states that become the lowest-lying excited states. These charge-separated states can be generated by the decay of locally excited states on a nanosecond to picosecond time scale. The distance of the charged fragment to the center of the fullerenic cage and its accessibility to the solvent determine the strength of the hypsochromic shift.

Enabling Superior Sodium Capture for Efficient Water Desalination by a Tubular Polyaniline Decorated with Prussian Blue Nanocrystals

The application of electrochemical energy storage materials to capacitive deionization (CDI), a low-cost and energy-efficient technology for brackish water desalination, has recently been proven effective in solving problems of traditional CDI electrodes, i.e., low desalination capacity and incompatibility in high salinity water. However, Faradaic electrode materials suffer from slow salt removal rate and short lifetime, which restrict their practical usage. Herein, a simple strategy is demonstrated for a novel tubular-structured electrode, i.e., polyaniline (PANI)-tube-decorated with Prussian blue (PB) nanocrystals (PB/PANI composite). This composite successfully combines characteristics of two traditional Faradaic materials, and achieves high performance for CDI. Benefiting from unique structure and rationally designed composition, the obtained PB/PANI exhibits superior performance with a large desalination capacity (133.3 mg g^-1 at 100 mA g^-1 ), and ultrahigh salt-removal rate (0.49 mg g^-1 s^-1 at 2 A g^-1 ). The synergistic effect, interfacial enhancement, and desalination mechanism of PB/PANI are also revealed through in situ characterization and theoretical calculations. Particularly, a concept for recovery of the energy applied to CDI process is demonstrated. This work provides a facile strategy for design of PB-based composites, which motivates the development of advanced materials toward high-performance CDI applications.

Enhanced Ion Conduction via Epitaxially Polymerized Two-Dimensional Conducting Polymer for High-Performance Cathode in Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are one of the promising choices for the future large-scale grid energy storage, in which Mn-based cathode materials have the advantages of low cost and environmental friendliness. However, their capacity delivery and cycling stability are limited by the large bulk-induced incomplete zincation and structure pulverization. Here, we develop a strategy of epitaxial polymerization in the liquid phase to fabricate two-dimensional (2D) MnO_x/polypyrrole nanosheets to enhance the zinc-ion storage by realizing the efficient utilization of active materials and improving the structural stability via a polymerized framework. An ultrahigh capacity of 408 mAh g^-1 is demonstrated at 1C rate, and an excellent capacity retention of 78% is realized after 2800 cycles at 5C rate for the AZIB. Electrochemical and morphological characterizations reveal that the unique 2D structure contributes to both the electron/ion conductivity and structural stability. The epitaxial polymerization of the conducting polymer in the liquid phase provides a new perspective to the synthesis of high-performance electrode materials and 2D conducting polymers.

Voltage issue of aqueous rechargeable metal-ion batteries

Over the past two decades, a series of aqueous rechargeable metal-ion batteries (ARMBs) have been developed, aiming at improving safety, environmental friendliness and cost-efficiency in fields of consumer electronics, electric vehicles and grid-scale energy storage. However, the notable gap between ARMBs and their organic counterparts in energy density directly hinders their practical applications, making it difficult to replace current widely-used organic lithium-ion batteries. Basically, this huge gap in energy density originates from cell voltage, as the narrow electrochemical stability window of aqueous electrolytes substantially confines the choice of electrode materials. This review highlights various ARMBs with focuses on their voltage characteristics and strategies that can effectively raise battery voltage. It begins with the discussion on the fundamental factor that limits the voltage of ARMBs, i.e., electrochemical stability window of aqueous electrolytes, which decides the maximum-allowed potential difference between cathode and anode. The following section introduces various ARMB systems and compares their voltage characteristics in midpoint voltage and plateau voltage, in relation to respective electrode materials. Subsequently, various strategies paving the way to high-voltage ARMBs are summarized, with corresponding advancements highlighted. The final section presents potential directions for further improvements and future perspectives of this thriving field.

High-Voltage Aqueous Na-Ion Battery Enabled by Inert-Cation-Assisted Water-in-Salt Electrolyte

Water-in-salt (WiS) electrolytes provide a new pathway to widen the electrochemical window of aqueous electrolytes. However, their formulation strongly depends on the solubility of the chosen salts, imposing a stringent restriction on the number of possible WiS systems. This issue becomes more severe for aqueous Na-ion batteries (ANIBs) owing to the relatively lower solubility of sodium salts compared to its alkaline cousins (Li, K, and Cs). A new class of the inert-cation-assisted WiS (IC-WiS) electrolytes containing the tetraethylammonium (TEA⁺ ) inert cation is reported. The Na IC-WiS electrolyte at a superhigh concentration of 31 mol kg^-1 exhibits a wide electrochemical window of 3.3 V, suppresses transition metal dissolution from the cathode, and ensures singular intercalation of Na into both cathode and anode electrodes during cycling, which is often problematic in mixed alkali cation systems such as K-Na and Li-Na. Owing to these unique advantages of the IC-WiS electrolyte, the NaTiOPO₄ anode and Prussian blue analog Na_1.88 Mn[Fe(CN)₆ ]_0.97 ·1.35H₂ O cathode can be coupled to construct a full ANIB, delivering an average voltage of 1.74 V and a high energy density of 71 Wh kg^-1 with a capacity retention of 90% after 200 cycles at 0.25C and of 76% over 800 cycles at 1C.

A Long-Lived Azafullerenyl Radical Stabilized by Supramolecular Shielding with a [10]Cycloparaphenylene

A major handicap towards the exploitation of radicals is their inherent instability. In the paramagnetic azafullerenyl radical C59 N. , the unpaired electron is strongly localized next to the nitrogen atom, which induces dimerization to diamagnetic bis(azafullerene), (C59 N)2 . Conventional stabilization by introducing steric hindrance around the radical is inapplicable here because of the concave fullerene geometry. Instead, we developed an innovative radical shielding approach based on supramolecular complexation, exploiting the protection offered by a [10]cycloparaphenylene ([10]CPP) nanobelt encircling the C59 N. radical. Photoinduced radical generation is increased by a factor of 300. The EPR signal showing characteristic 14 N hyperfine splitting of C59 N. ⊂ [10]CPP was traced even after several weeks, which corresponds to a lifetime increase of >108 . The proposed approach can be generalized by tuning the diameter of the employed nanobelts, opening new avenues for the design and exploitation of radical fullerenes.

A High-Rate and Long-Life Aqueous Rechargeable Ammonium Zinc Hybrid Battery

Unlike traditional metal-ion insertion, the emerging aqueous rechargeable ammonium-ion batteries (ARABs) brings new battery chemistries for future stationary energy storage. However, low energy density and low durability hinder the further development of ARABs because of the lack of suitable and cost-efficient anodes. In this study, an aqueous rechargeable ammonium zinc hybrid battery is fabricated from durable corner-truncated sodium iron hexacyanoferrate nanocubes as the cathode and low-cost zinc as the anode. This novel hybrid battery demonstrates an average working voltage of 1.3 V, excellent rate capability, and a high energy density of 81.7 Wh kg^-1 at 286 W kg^-1 (based on two electrodes' active mass), as well as a long lifespan with 92.1 % capacity retention after 2000 cycles, outperforming the reported ARABs and many aqueous hybrid batteries. The strategy to assemble the ammonium zinc hybrid battery provides guidance for improving the feasibility of ARABs for practical application.

Activating C-Coordinated Iron of Iron Hexacyanoferrate for Zn Hybrid-Ion Batteries with 10 000-Cycle Lifespan and Superior Rate Capability

Prussian blue analogue (PBA)-type metal hexacyanoferrates are considered as significant cathodes for zinc batteries (ZBs). However, these PBA-type cathodes, such as cyanogroup iron hexacyanoferrate (FeHCF), suffer from ephemeral lifespan (≤1000 cycles), and inferior rate capability (1 A g^-1 ). This is because the redox active sites of multivalent iron (Fe(III/II)) can only be very limited activated and thus utilized. This is attributed to the spatial resistance caused by the compact cooperation interaction between Fe and the surrounded cyanogroup, and the inferior conductivity. Here, it is found that high-voltage scanning can effectively activate the C-coordinated Fe in FeHCF cathode in ZBs. Thanks to this activation, the Zn-FeHCF hybrid-ion battery achieves a record-breaking cycling performance of 5000 (82% capacity retention) and 10 000 cycles (73% capacity retention), respectively, together with a superior rate capability of maintaining 53.2% capacity at superhigh current density of 8 A g^-1 (≈97 C). The reversible distortion and recovery of the crystalline structure caused by the (de)insertion of zinc and lithium ions is revealed. It is believed that this work represents a substantial advance on PBA electrode materials and may essentially promote application of PBA materials.

Flexible and High-Voltage Coaxial-Fiber Aqueous Rechargeable Zinc-Ion Battery

Extensive efforts have been devoted to construct a fiber-shaped energy-storage device to fulfill the increasing demand for power consumption of textile-based wearable electronics. Despite the myriad of available material selections and device architectures, it is still fundamentally challenging to develop eco-friendly fiber-shaped aqueous rechargeable batteries (FARBs) on a single-fiber architecture with high energy density and long-term stability. Here, we demonstrate flexible and high-voltage coaxial-fiber aqueous rechargeable zinc-ion batteries (CARZIBs). By utilizing a novel spherical zinc hexacyanoferrate with prominent electrochemical performance as cathode material, the assembled CARZIB offers a large capacity of 100.2 mAh cm^-3 and a high energy density of 195.39 mWh cm^-3, outperforming the state-of-the-art FARBs. Moreover, the resulting CARZIB delivers outstanding flexibility with the capacity retention of 93.2% after bending 3000 times. Last, high operating voltage and output current are achieved by the serial and parallel connection of CARZIBs woven into the flexible textile to power high-energy-consuming devices. Thus, this work provides proof-of-concept design for next-generation wearable energy-storage devices.

NASICON-Structured NaTi2(PO4)3 for Sustainable Energy Storage

Several emerging energy storage technologies and systems have been demonstrated that feature low cost, high rate capability, and durability for potential use in large-scale grid and high-power applications. Owing to its outstanding ion conductivity, ultrafast Na-ion insertion kinetics, excellent structural stability, and large theoretical capacity, the sodium superionic conductor (NASICON)-structured insertion material NaTi2(PO4)3 (NTP) has attracted considerable attention as the optimal electrode material for sodium-ion batteries (SIBs) and Na-ion hybrid capacitors (NHCs). On the basis of recent studies, NaTi2(PO4)3 has raised the rate capabilities, cycling stability, and mass loading of rechargeable SIBs and NHCs to commercially acceptable levels. In this comprehensive review, starting with the structures and electrochemical properties of NTP, we present recent progress in the application of NTP to SIBs, including non-aqueous batteries, aqueous batteries, aqueous batteries with desalination, and sodium-ion hybrid capacitors. After a thorough discussion of the unique NASICON structure of NTP, various strategies for improving the performance of NTP electrode have been presented and summarized in detail. Further, the major challenges and perspectives regarding the prospects for the use of NTP-based electrodes in energy storage systems have also been summarized to offer a guideline for further improving the performance of NTP-based electrodes.

High rate and stable symmetric potassium ion batteries fabricated with flexible electrodes and solid-state electrolytes

Aqueous batteries designed with K-ions have outstanding potential for future energy storage applications. When coupled with cathode and anode materials both operating with the intercalation mechanism, K-ion batteries could have kinetics and stability similar to Li-ion batteries in principle but with a much lower cost. However, the electrode materials developed so far still suffer from poor stability and limited activity, especially from the anode side. Herein, a new concept of symmetric K-ion batteries was developed by using potassium Prussian blue (KPB) as a bipolar material. The KPB particles were grown on flexible and strong wiper cloth substrates that were pre-coated with polypyrrole (PPy). The use of PPy as an interlayer not only boosted electrical conductivity but also ensured uniform growth of KPB particles. The synthesized KPB@PPy@wiper electrodes have superior flexibility and stability, and exhibited two redox pairs both with remarkable kinetics. When used as bipolar electrodes in combination with a gel solid-state electrolyte, they delivered a well-defined discharge voltage plateau at ∼0.6 V with superior rate capability and cycling stability. This work could provide new insights into the design of K-ion batteries, and give new options for developing flexible solid-state devices.

In Situ Tracking of Partial Sodium Desolvation of Materials with Capacitive, Pseudocapacitive, and Battery-like Charge/Discharge Behavior in Aqueous Electrolytes

Aqueous electrolytes can be used for electrical double-layer capacitors, pseudocapacitors, and intercalation-type batteries. These technologies may employ different electrode materials, most importantly high-surface-area nanoporous carbon, two-dimensional materials, and metal oxides. All of these materials also find more and more applications in electrochemical desalination devices. During the electrochemical operation of such electrode materials, charge storage and ion immobilization are accomplished by non-Faradaic ion electrosorption, Faradaic ion intercalation at specific crystallographic sites, or ion insertion between layers of two-dimensional materials. These processes may or may not be associated with a (partial) loss of the aqueous solvation shell around the ions. Our work showcases the electrochemical quartz crystal microbalance as an excellent tool for quantifying the change in effective solvation. We chose sodium as an important cation for energy storage materials (sodium-based aqueous electrolytes) and electrochemical desalination (saline media). Our data show that a major amount of water uptake occurs during ion electrosorption in nanoporous carbon, while battery-like ion insertion between layers of titanium disulfide is associated with an 80% loss of the initially present solvation molecules. Sodiation of MXene is accomplished by a loss of 90% of the number of solvent molecules, but nanoconfined water in-between the MXene layers may compensate for this large degree of desolvation. In the case of sodium manganese oxide, we were able to demonstrate the full loss of the solvation shell.

Investigating the Impact of Particle Size on the Performance and Internal Resistance of Aqueous Zinc Ion Batteries with a Manganese Sesquioxide Cathode

Aqueous zinc ion batteries are considered to be one of the most promising battery types for stationary energy storage applications. Due to their aqueous electrolyte, they are inherently safe concerning flammability and environmentally friendly. In this work, the strong influence of the particle size of manganese sesquioxide on the performance of the battery is investigated. Ball milling was used to decrease the particle diameter. The resulting powders were used as active material for the cathodes, which were assembled in coin cells as full cells together with zinc foil anodes and aqueous electrolyte. It was shown that about one third of the original particle size can nearly triple the initial capacity when charged with constant current and constant end-of-charge voltage. Additionally, smaller particles were found to be responsible for the collapse of capacity at high current densities. By means of electrochemical impedance spectroscopy, it was shown that particle size also has a large impact on the internal resistance. Initially, the internal resistance of the cells with small particles was about half that of those with big particles, but became larger during cycling. This reveals accelerated aging processes when the reactive surface of the active material is increased by smaller particles.