Cationic Charges Leading to an Inverse Free‐Energy Relationship for N−N Bond Formation by Mn VI Nitrides

Influence of internal electrostatics on reduction potentials in amine-ligated bimetallic copper complexes

The electrostatic modulation of redox potentials of molecular electrocatalysts is a promising strategy to minimize overpotentials without compromising their catalytic activity given their intrinsic correlation. While the introduction of s-block cations to modulate the redox potential of single-site transition metal catalysts is known, the prevalence and nature of such electrostatic interactions in bimetallic complexes deserves further attention. In this work, using density functional theory and electrostatic charged sphere models, we quantify the influence of distance-dependent electrostatic effects on the reduction potentials of a bimetallic Cu(II) model system with a dipicolylamine (DPA) ligand, wherein the Cu(II) centers are bridged by an aliphatic diamine (NH2-(CH2)n-NH2) linker of varying chain lengths (n = 0 to 10). The calculated reduction potentials in non-aqueous solvation environments were found to vary linearly with the reciprocal of the Cu-Cu distance with a slope of 4.1 V Å, and span more than 500 mV, suggesting a strong distance-dependent coulombic electrostatic interaction between the two metal centers. The effect of chemical perturbations to the primary coordination sphere on the distance-dependent electrostatic effects, viz. nature of the metal ion, overall charge and ligand field, was quantified. The in silico predicted shifts in the one-electron redox potential as a function of the chain length in the model system were experimentally validated with the synthesis and cyclic voltammetry studies of two bimetallic Cu(II)(DPA) complexes bridged by 1,4-diaminobutane and 1,8-diaminooctane in acetonitrile.

Tunability in Heterobimetallic Complexes Featuring an Acyclic "Tiara" Polyether Motif

Both cyclic "crown" and acyclic "tiara" polyethers have been recognized as useful for the binding of metal cations and enabling the assembly of multimetallic complexes. However, the properties of heterobimetallic complexes built upon acyclic polyethers have received less attention than they deserve. Here, the synthesis and characterization of a family of eight redox-active heterobimetallic complexes that pair a nickel center with secondary redox-inactive cations (K+, Na+, Li+, Sr2+, Ca2+, Zn2+, La3+, and Lu3+) bound in acyclic polyether "tiara" moieties are reported. Structural studies with X-ray diffraction analysis were carried out on the monometallic nickel precursor complex to the heterobimetallics and the adducts with K+, Li+, Sr2+, Zn2+, and Lu3+; the results confirm the binding of secondary cations in the tiara site and demonstrate that the tiara moiety is more conformationally flexible than the analogous 18-crown-6-like moiety of a closely related macrocyclic "crown" ligand. Spectroscopic and electrochemical studies show, however, that the stability and cation-driven tunability of the tiara-based heterobimetallic species are quite similar to those previously measured for crown-based species. Consequently, the tiara motif appears to be at least as equally useful for constructing tunable multimetallic species as the more commonly encountered crown motif; a comprehensive set of titration data collected in an acetonitrile solution support this conclusion as well. Because the use of acyclic tiaras avoids the need for tedious and/or time-intensive syntheses of macrocyclic structures, these findings suggest that tiara motifs could be broadly advantageous in the design of ligands to support multimetallic chemistry.

Investigating the formation of metal nitride complexes employing a tetradentate bis-carbene bis-phenolate ligand

The synthesis of MnV and CrV nitride complexes of a pro-radical tetradentate bis-phenol bis-N-heterocyclic carbene ligand H2LC2O2 was investigated. Employing either azide photolysis of the MnIII precursor complex MnLC2O2(N3) or a nitride exchange reaction between MnLC2O2(Br) and the nitride exchange reagent Mnsalen(N) failed to provide a useful route to the target nitride MnLC2O2(N). Experimental results support initial formation of the target nitride MnLC2O2(N), however, the nitride rapidly inserts into a Mn-CNHC bond. A second insertion reaction results in the isolation of the doubly inserted ligand product [H2LC2O2(N)]+ in good yield. In contrast, the Cr analogue CrLC2O2(N) was readily prepared and characterized by a number of experimental methods, including X-ray crystallography. Theoretical calculations predict a lower transition state energy for nitride insertion into the M-CNHC bond for Mn in comparison to Cr, and in addition the N-inserted product is stabilized for Mn while destabilized for Cr. Natural bond order (NBO) analysis predicts that the major bonding interaction (π MN → σ* M-CNHC) promotes nucleophilic attack of the nitride on the carbene as the major reaction pathway. Finally, one-electron oxidation of CrLC2O2(N) affords a relatively stable cation that is characterized by experimental and theoretical analysis to be a metal-oxidized d0 CrVI species.

Controlling Hydrogen Evolution and CO2 Reduction at Transition Metal Hydrides

ConspectusFuel-forming reactions such as the hydrogen evolution reaction (HER) and CO2 reduction (CO2R) are vital to transitioning to a carbon-neutral economy. The equivalent oxidation reactions are also important for efficient utilization in fuel cells. Metal hydride intermediates are common in these catalytic and electrocatalytic processes. Guiding metal hydride reactivity is important for achieving selective, kinetically fast, and low overpotential redox reactions. Our work has focused on understanding kinetic and thermodynamic aspects for controlling these reactive hydride species in an effort to design more selective electrocatalysts that operate at low overpotentials. Key to our research approach is understanding the free energy changes and rate of discrete steps of catalysis through the synthesis of proposed intermediates to independently investigate catalytic steps. Hydricity, the free energy of hydride dissociation, and how these values change with metal and ligand environment have informed catalyst design in the past few decades. We describe here how we have advanced upon these earlier studies.In our early studies we sought to understand solvent-dependent changes in hydricity for transition metal hydrides and how they impact the free energy for reduction of CO2 to formate (HCO2-). Additionally, we described how hydricity values can be applied to optimize HER and CO2R catalysis. This framework provides general guidelines for achieving selective CO2 reduction to formate without concomitant generation of H2. Kinetic information on steps in the proposed catalytic cycle of HER and CO2R catalysts were evaluated to identify potential rate-determining steps. As a second approach to achieve selective reduction for CO2, we explored two catalyst design strategies to kinetically inhibit HER using electrostatic (charged) and steric interactions. Hydricity values and other considerations for minimizing the free energy of proposed catalytic steps were also used to design an electrocatalyst for the interconversion between CO2 and HCO2- at low overpotentials. Further, we discuss our efforts to translate the CO2 hydrogenation activity of homogeneous catalysts to electrocatalysis.All of these catalytic systems operate with classical metal hydrides, where the electrons and proton are colocated on the metal center. However, classical metal hydrides all require very reducing potentials to generate sufficiently strong hydride donors for CO2 reduction. An analysis of metal hydride hydricity and reduction potentials shows that the strong correlation between reduction potential and hydricity is a general trend because the former is also highly correlated to pKa. However, formate dehydrogenase (FDH) generates a competent hydride donor at more mild potentials through bidirectional hydride transfer, where the proton and electrons of the hydride are not colocated. This bioinspired approach points to a promising new strategy for generating strong hydride donors at milder potentials and will surely open new avenues for using hydricity as a guide for addressing new and existing problems in catalysis.

Catalyst Protonation Changes the Mechanism of Electrochemical Hydride Transfer to CO2

It is well-known that addition of a cationic functional group to a molecule lowers the necessary applied potential for an electron transfer (ET) event. This report studies the effect of a proton (a cation) on the mechanism of electrochemically driven hydride transfer (HT) catalysis. Protonated, air-stable [HFe4N(triethyl phosphine (PEt3))4(CO)8] (H4) was synthesized by reaction of PEt3 with [Fe4N(CO)12]- (A -) in tetrahydrofuran, with addition of benzoic acid to the reaction mixture. The reduction potential of H4 is -1.70 V vs SCE which is 350 mV anodic of the reduction potential for 4 -. Reactivity studies are consistent with HT to CO2 or to H+ (carbonic acid), as the chemical event following ET, when the electrocatalysis is performed under 1 atm of CO2 or N2, respectively. Taken together, the chemical and electrochemical studies of mechanism suggest an ECEC mechanism for the reduction of CO2 to formate or H+ to H2, promoted by H4. This stands in contrast to an ET, two chemical steps, followed by an ET (ECCE) mechanism that is promoted by the less electron rich catalyst A -, since A - must be reduced to A 2- before HA - can be accessed.

Design of Highly Electrophilic and Stable Metal Nitrido Complexes

ConspectusMetal oxo (M═O) and nitrido (M≡N) complexes are two important classes of high-valent transition metal complexes. The use of M═O as oxidants in chemical and biological systems has been extensively investigated. Nature makes use of M═O in enzymes such as cytochrome P450 to oxidize a variety of substrates. Highly oxidizing oxo species have also been synthesized and they have been shown to oxidize organic and inorganic substrates via one-electron oxidation, O atom transfer, and H atom abstraction pathways. In contrast, the oxidation chemistry of M≡N is much less investigated. Although a variety of nitrido complexes are known, most of them are inert and do not show appreciable oxidizing properties, which is not unexpected since the N3- ligand is much more electron-donating than the O2- ligand. In principle, highly electrophilic/oxidizing nitrido complexes may be designed by using weakly coordinating ancillary ligands and/or by increasing the oxidation state of the metal centers. A number of such species have been generated in solution at low temperatures. However, attempts to isolate them are often hampered by their ease of decomposition via bimolecular N···N coupling to generate N2. In some cases, decomposition occurs by intramolecular nitrogenation of the ancillary ligand.In this account, we describe our recent efforts into the design of nitrido complexes that are highly oxidizing but stable enough so they can be isolated and characterized, and their reactivity toward organic substrates can be readily investigated.We have successfully isolated and determined the structure of the first stable manganese(VI) nitrido complex bearing an oxidation-resistant macrocyclic tetraamido TAML ligand, [MnVI(N)(TAML)]- (H4TAML = 3,3,6,6,9,9-hexamethyl-3,4,8,9-tetrahydro-1H-benzo[e][1,4,7,10] tetraazacyclotridecine-2,5,7,10(6H,11H)-tetraone). This complex readily undergoes direct aziridination of alkenes; it also abstracts hydrides from NADH analogues via a Separated CPET mechanism. Coupling of the nitrido ligands to give dinitrogen is a major decomposition pathway for electrophilic nitrido complexes. In order to shut down this pathway, we made use of a bulky trianionic corrole ligand TTPPC (H3TTPPC = 5,10,15-tris(2,4,6-triphenylphenyl)corrole) to prepare manganese nitrido complexes. Remarkably, we were able to isolate and determine the structures of [MnV(N)(TTPPC)]- and its one- and two-electron ligand-oxidized products, [MnV(N)(TTPPC+•)] and [MnV(N)(TTPPC2+)]+ ("TTPPC" has a 3- charge, 'TTPPC+•' has an overall 2- charge and 'TTPPC2+' has an overall 1- charge). Although [MnV(N)(TTPPC2+)]+ is formally a manganese(V) complex, it was found to be the most electrophilic among isolated metal nitrido complexes. The use of the bulky corrole ligand effectively prevents the decomposition of Mn≡N by N···N coupling.A number of luminescent M═O species that possess highly oxidizing excited states are known. We have also developed a strongly luminescent osmium(VI) nitrido complex, [OsVI(N)(L)(CN)3]- (OsN, HL = 2-(2-hydroxy-5-nitrophenyl)benzoxazole), that absorbs visible light to generate a highly oxidizing/electrophilic excited state. The excited state readily reacts with a wide variety of organic and inorganic substrates, many of these reactions are unprecedented. Notably, it reacts with cyclohexane to give an osmium(IV) cyclohexyliminato product, and with benzene to give an osmium(IV) p-benzoquinone iminato species.

Quantifying effects of second-sphere cationic groups on redox properties of dimolybdenum quadruple bonds

A series of four dimolybdenum paddlewheel complexes supported by anionic N,N-dimethylglycinate (DMG) or zwitterionic N,N,N-trimethylglycine (TMG) ligands was synthesised to examine the effects of charged groups in the second coordination sphere on redox properties of MoMo bonds. An average shift in reduction potential of +35 mV per cationically charged group was measured, which is approximately half of what would be expected for an analogous mononuclear complex.

Measuring the Electric Fields of Ions Captured in Crown Ethers

Controlling reactivity with electric fields is a persistent challenge in chemistry. One approach is to tether ions at well-defined locations near a reactive center. To quantify fields arising from ions, we report crown ethers that capture metal cations as field sources and a covalently bound vibrational Stark shift probe as a field sensor. We use experiments and computations in both the gas and liquid phases to quantify the vibrational frequencies of the probe and estimate the electric fields from the captured ions. Cations, in general, blue shift the probe frequency, with effective fields estimated to vary in the range of ∼0.2-3 V/nm in the liquid phase. Comparison of the gas and liquid phase data provides insight into the effects of mutual polarization of the molecule and solvent and screening of the ion's field. These findings reveal the roles of charge, local screening, and geometry in the design of tailored electric fields.

Shift of the reduction potential of nickel(II) Schiff base complexes in the presence of redox innocent metal ions

With the objective of gaining insight into the modulation of the reduction potential of the Ni(II/I) couple, we have synthesized two mononuclear nickel(II) complexes, NiLen (H2Len = N,N'-bis(3-methoxysalicylidene)-1,2-diamino-2-methylpropane) and NiLpn (H2Lpn = N,N'-bis(3-methoxysalicylidene)-1,3-diamino-2,2-dimethylpropane) of two N2O4 donor ligands and recorded their cyclic voltammograms. Both the nickel complexes show reversible reduction processes for the Ni(II/I) couple in acetonitrile solution but the reduction potential of NiLpn (E1/2 = -1.883 V) is 188 mV more positive than that of NiLen (E1/2 = -2.071 V). In the presence of redox inactive metal ions (Li+, Na+, K+, Mg2+, Ca2+ and Ba2+), the reduction potentials are shifted by 49-331 mV and 99-435 mV towards positive values compared to NiLen and NiLpn, respectively. The shift increases with the decrease of the pKa of the respective aqua-complexes of the metal ion but is poorly co-linear; however, better linearity is found when the shift of the mono- and bi-positive metal ion aqua complexes is plotted separately. Spectrophotometric titrations of these two nickel complexes with the guest metal ions in acetonitrile showed a well-anchored isosbestic point in all cases, confirming the adduct formation of NiLen and NiLpn with the metal ions. Structural analysis of single crystals, [(NiLen)Li(H2O)2]·ClO4 (1), [(NiLpn)Li(H2O)]·ClO4 (2), [(NiLpn)2Na]·BF4 (3) and [(NiLpn)2Ba(H2O)(ClO4)]·ClO4 (4), also corroborates the heterometallic adduct formation. The orbital energies of the optimised heterometallic adducts from which electron transfers originated were calculated in order to explain the observed reduction process. A strong linear connection between the calculated orbital energies and the experimental E1/2 values was observed. According to MEP and 2D vector field plots, the largest shift for divalent metal ions is most likely caused by the local electric field that they impose in addition to Lewis acidity.

Oxidation-induced ambiphilicity triggers N-N bond formation and dinitrogen release in octahedral terminal molybdenum(v) nitrido complexes

Coupling of octahedral, terminal d1 molybdenum(v) nitrido complexes supported by a dianionic pentadentate ligand via N-N bond formation to give μ-dinitrogen complexes was found to be thermodynamically feasible but faces significant kinetic barriers. However, upon oxidation, a kinetically favored nucleophilic/electrophilic N-N bond forming mechanism was enabled to give monocationic μ-dinitrogen dimers. Computational and experimental evidence for this "oxidation-induced ambiphilic nitrido coupling" mechanism is presented. The factors influencing release of dinitrogen from the resulting μ-dinitrogen dimers were also probed and it was found that further oxidation to a dicationic species is required to induce (very rapid) loss of dinitrogen. The mechanistic path discovered for N-N bond formation and dinitrogen release follows an ECECC sequence (E = "electrochemical step"; C = "chemical step"). Experimental evidence for the intermediacy of a highly electrophilic, cationic d0 molybdenum(vi) nitrido in the N-N bond forming mechanism via trapping with an isonitrile reagent is also discussed. Together these results are relevant to the development of molecular catalysts capable of mediating ammonia oxidation to dihydrogen and dinitrogen.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Untangling ancillary ligand donation versus locus of oxidation effects on metal nitride reactivity

We detail the relative role of ancillary ligand electron-donating ability in comparison to the locus of oxidation (either metal or ligand) on the electrophilic reactivity of a series of oxidized Mn salen nitride complexes. The electron-donating ability of the ancillary salen ligand was tuned via the para-phenolate substituent (R = CF3, H, tBu, OiPr, NMe2, NEt2) in order to have minimal effect on the geometry at the metal center. Through a suite of experimental (electrochemistry, electron paramagnetic resonance spectroscopy, UV-vis-NIR spectroscopy) and theoretical (density functional theory) techniques, we have demonstrated that metal-based oxidation to [MnVI(SalR)N]+ occurs for R = CF3, H, tBu, OiPr, while ligand radical formation to [MnV(SalR)N]+˙ occurs with the more electron-donating substituents R = NMe2, NEt2. We next investigated the reactivity of the electrophilic nitride with triarylphosphines to form a MnIV phosphoraneiminato adduct and determined that the rate of reaction decreases as the electron-donating ability of the salen para-phenolate substituent is increased. Using a Hammett plot, we find a break in the Hammett relation between R = OiPr and R = NMe2, without a change in mechanism, consistent with the locus of oxidation exhibiting a dominant effect on nitride reactivity, and not the overall donating ability of the ancillary salen ligand. This work differentiates between the subtle and interconnected effects of ancillary ligand electron-donating ability, and locus of oxidation, on electrophilic nitride reactivity.

Modular preparation of cationic bipyridines and azaarenes via C-H activation

Bipyridines are ubiquitous in organic and inorganic chemistry because of their redox and photochemical properties and their utility as ligands to transition metals. Cationic substituents on bipyridines and azaarenes are valuable as powerful electron-withdrawing functionalities that also enhance solubility in polar solvents, but there are no general methods for direct functionalization. A versatile method for the preparation of trimethylammonium- and triarylphosphonium-substituted bipyridines and azaheterocycles is disclosed. This methodology showcases a C-H activation of pyridine N-oxides that enables a highly modular and scalable synthesis of a diverse array of cationically charged azaarenes. The addition of trimethylammonium functionalities on bipyridine derivatives resulted in more anodic reduction potentials (up to 700 mV) and increased electrochemical reversibility compared to the neutral unfunctionalized bipyridine. Additonally, metallation of 4-triphenylphosphinated biquinoline to make the corresponding Re(CO)3Cl complex resulted in reduction potentials 400 mV more anodic than the neutral derivative.

Charge and Solvent Effects on the Redox Behavior of Vanadyl Salen-Crown Complexes

The incorporation of charged groups proximal to a redox active transition metal center can impact the local electric field, altering redox behavior and enhancing catalysis. Vanadyl salen (salen = N,N'-ethylenebis(salicylideneaminato)) complexes functionalized with a crown ether containing a nonredox active metal cation (V-Na, V-K, V-Ba, V-La, V-Ce, and V-Nd) were synthesized. The electrochemical behavior of this series of complexes was investigated by cyclic voltammetry in solvents with varying polarity and dielectric constant (ε) (acetonitrile, ε = 37.5; N,N-dimethylformamide, ε = 36.7; and dichloromethane, ε = 8.93). The vanadium(V/IV) reduction potential shifted anodically with increasing cation charge compared to a complex lacking a proximal cation (ΔE_1/2 > 900 mV in acetonitrile and >700 mV in dichloromethane). In contrast, the reduction potential for all vanadyl salen-crown complexes measured in N,N-dimethylformamide was insensitive to the magnitude of the cationic charge, regardless of the electrolyte or counteranion used. Titration studies of N,N-dimethylformamide into acetonitrile resulted in cathodic shifting of the vanadium(V/IV) reduction potential with increasing concentration of N,N-dimethylformamide. Binding constants of N,N-dimethylformamide (log(K_DMF)) for the series of crown complexes show increased binding affinity in the order of V-La > V-Ba > V-K > (salen)V(O), indicating an enhancement of Lewis acid/base interaction with increasing cationic charge. The redox behavior of (salen)V(O) and (salen-OMe)V(O) (salen-OMe = N,N'-ethylenebis(3-methoxysalicylideneamine) was also investigated and compared to the crown-containing complexes. For (salen-OMe)V(O), a weak association of triflate salt at the vanadium(IV) oxidation state was observed through cyclic voltammetry titration experiments, and cation dissociation upon oxidation to vanadium(V) was identified. These studies demonstrate the noninnocent role of solvent coordination and cation/anion effects on redox behavior and, by extension, the local electric field.

Distinguishing between the Electrostatic Effects and Explicit Ion Interactions in a Stark Probe

Vibrational Stark probes are incisive tools for measuring local electric fields in a wide range of chemical environments. The interpretation of the frequency shift often gets complicated due to the specific interactions of the probe, such as hydrogen bonding and Lewis bonding. Therefore, it is important to distinguish between the pure electrostatic response and the response due to such specific interactions. Here we report a molecular system that is sensitive to both the Stark effect from a single ion and the explicit Lewis bonding of ions with the probe. The molecule consists of a crown ether with an appended benzonitrile. The crown captures cations of various charges, and the electric field from the ions is sensed by the benzonitrile probe. Additionally, the lone pair of the benzonitrile can engage in Lewis interactions with some of the ions by donating partial charge density to the ions. Our system exhibits both of these effects and therefore is a suitable test bed for distinguishing between the pure electrostatic and the Lewis interactions. Our computational results show that the electrostatic influence of the ion is operative at large distances, while the Lewis interaction becomes important only within distances that permit orbital overlap. Our results may be useful for using the nitrile probe for measuring electrostatic and coordination effects in complex ionic environments such as the electrode-electrolyte interfaces.

Combined effects of the lewis acidity and electric field of proximal redox innocent metal ions on the redox potential of vanadyl Schiff base complexes: an experimental and theoretical study

The reactivity of biological or synthetic metalloenzymes is modulated in the presence of redox innocent Lewis acidic metal ions as they change the redox potential of the redox active metal ions present in the active site of metalloenzymes. To study this effect, we synthesised a mono-nuclear V(IV) complex (VOL, 1) with an N₂O₄ donor bicompartmental ligand, characterized it by single-crystal X-ray crystallography and recorded its cyclic voltammogram in acetonitrile. The CV revealed a reversible redox process for the V(IV)/V(V) couple. The potential of the V(IV)/V(V) couple shifted to a more positive value when equivalent amounts of Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺ and Ba²⁺ ions were added separately to its acetonitrile solution, but the extent of shift for Li⁺ and Mg²⁺ was much less than that of the other metal ions. The guest metal ions except Li⁺ and Mg²⁺ were accommodated in the outer compartment of VOL as confirmed by IR and UV-Vis spectral analysis. Single-crystal structural analysis of [(VOL)KPF₆]₂, (1·K) and [(VOL)Ba(ClO₄)₂(H₂O)]_n, (1·Ba) also confirmed the hetero-metallic adduct formation. The correlation of the shift of the V(IV/V) redox potential with the Lewis acidity of respective metal ions deviated appreciably from linearity. DFT calculations suggest that the shift in potential is probably controlled by local electric fields induced by those ions, as indicated by 2D vector electric field maps.

Using Substituted [Fe4N(CO)12]- as a Platform To Probe the Effect of Cation and Lewis Acid Location on Redox Potential

The impact of cationic and Lewis acidic functional groups installed in the primary or secondary coordination sphere (PCS or SCS) of an (electro)catalyst is known to vary depending on the precise positioning of those groups. However, it is difficult to systematically probe the effect of that position. In this report, we probe the effect of the functional group position and identity on the observed reduction potentials (E_p,c) using substituted iron clusters, [Fe₄N(CO)₁₁R]ⁿ, where R = NO⁺, PPh₂-CH₂CH₂-9BBN, (^MePTA⁺)₂, (^MePTA⁺)₄, and H⁺ and n = 0, -1, +1, or +3 (9-BBN is 9-borabicyclo(3.3.1)nonane; ^MePTA⁺ is 1-methyl-1-azonia-3,5-diaza-7-phosphaadamantane). The cationic NO⁺ and H⁺ ligands cause anodic shifts of 700 and 320 mV, respectively, in E_p,c relative to unsubstituted [Fe₄N(CO)₁₂]^-. Infrared absorption band data, ν_CO, suggests that some of the 700 mV shift by NO⁺ results from electronic changes to the cluster core. This contrasts with the effects of cationic ^MePTA⁺ and H⁺ which cause primarily electrostatic effects on E_p,c. Lewis acidic 9-BBN in the SCS had almost no effect on E_p,c.

Automated Variable Electric-Field DFT Application for Evaluation of Optimally Oriented Electric Fields on Chemical Reactivity

Recent theoretical work and experiments at molecular junctions have provided a strong conceptualization for the effects of oriented electric fields (OEFs) on organic reactions. Depending on the axis of application, OEFs can increase (or decrease) the reaction rate or distinguish between isomeric pathways. Despite the conceptual elegance of OEFs, which may be applied externally or induced locally, as tools for catalyzing organic reactions, implementation in synthetically relevant systems has been hampered by inefficiencies in evaluating reaction sensitivity to field effects. Herein, we describe the development of the Automated Variable Electric-Field DFT Application (A.V.E.D.A.) for streamlined evaluation of a reaction's susceptibility to OEFs. This open-source software was designed to be accessible for nonexpert users of computational and programming tools. Following initiation by a single command (and with no subsequent intervention) the Linux workflow manages a series of density functional theory calculations and mathematical manipulations to optimize local-minimum and transition-state structures in oriented electric fields of increasing magnitude. The resulting molecular and reaction dipole moments, field-perturbed geometries, and net effective activation energies are compiled for user interpretation. Ten representative pericyclic reactions that showcase the development and evaluation of A.V.E.D.A. are described.

Incorporation of Cation Affects the Redox Reactivity of Fe-NNN Complexes on C-H Oxidation

Cations such as Lewis acids have been shown to enhance the catalytic activity of high-valent Fe-oxygen intermediates. Herein, we present a pyridine diamine ethylene glycol macrocycle, which can form Zn(II)- or Fe(III)-complex with the NNN site, while allowing redox-inactive cations to bind to the ethylene glycol moiety. The addition of alkali, alkali earth, and lanthanum ions resulted in positive shifts to the Fe(III/II) redox potential. Calculation of dissociation constants showed the tightest binding with a Ba²⁺ ion. Density functional theory calculations were used to elucidate the effects of redox inactive cations toward the electronic structures of Fe complexes. Although the Fe-NNN complexes, both in the absence and presence of cations, can catalyze C-H oxidation of 9,10-dihydroanthracene, to give anthracene [hydrogen atom transfer (HAT) product], anthrone, and anthraquinone [oxygen atom transfer (OAT) products], highest overall activity and OAT/HAT product ratios were obtained in the presence of dications, that is, Ba²⁺ and Mg²⁺, respectively.

Electrocatalysis with Molecular Transition-Metal Complexes for Reductive Organic Synthesis

Electrocatalysis enables the formation or cleavage of chemical bonds by a genuine use of electrons or holes from an electrical energy input. As such, electrocatalysis offers resource-economical alternative pathways that bypass sacrificial, waste-generating reagents often required in classical thermal redox reactions. In this Perspective, we showcase the exploitation of molecular electrocatalysts for electrosynthesis, in particular for reductive conversion of organic substrates. Selected case studies illustrate that efficient molecular electrocatalysts not only are appropriate redox shuttles but also embrace the features of organometallic catalysis to facilitate and control chemical steps. From these examples, guidelines are proposed for the design of molecular electrocatalysts suited to the reduction of organic substrates. We finally expose opportunities brought by catalyzed electrosynthesis to functionalize organic backbones, namely using sustainable building blocks.

Chromium Nitride Umpolung Tuned by the Locus of Oxidation

Oxidation of a series of Cr^V nitride salen complexes (Cr^VNSal^R) with different para-phenolate substituents (R = CF₃, tBu, NMe₂) was investigated to determine how the locus of oxidation (either metal or ligand) dictates reactivity at the nitride. Para-phenolate substituents were chosen to provide maximum variation in the electron-donating ability of the tetradentate ligand at a site remote from the metal coordination sphere. We show that one-electron oxidation affords Cr^VI nitrides ([Cr^VINSal^R]⁺; R = CF₃, tBu) and a localized Cr^V nitride phenoxyl radical for the more electron-donating NMe₂ substituent ([Cr^VNSal^NMe2]^•+). The facile nitride homocoupling observed for the Mn^VI analogues was significantly attenuated for the Cr^VI complexes due to a smaller increase in nitride character in the M≡N π* orbitals for Cr relative to Mn. Upon oxidation, both the calculated nitride natural population analysis (NPA) charge and energy of molecular orbitals associated with the {Cr≡N} unit change to a lesser extent for the Cr^V ligand radical derivative ([Cr^VNSal^NMe2]^•+) in comparison to the Cr^VI derivatives ([Cr^VINSal^R]⁺; R = CF₃, tBu). As a result, [Cr^VNSal^NMe2]^•+ reacts with B(C₆F₅)₃, thus exhibiting similar nucleophilic reactivity to the neutral Cr^V nitride derivatives. In contrast, the Cr^VI derivatives ([Cr^VINSal^R]⁺; R = CF₃, tBu) act as electrophiles, displaying facile reactivity with PPh₃ and no reaction with B(C₆F₅)₃. Thus, while oxidation to the ligand radical does not change the reactivity profile, metal-based oxidation to Cr^VI results in umpolung, a switch from nucleophilic to electrophilic reactivity at the terminal nitride.

New Strategies for Direct Methane-to-Methanol Conversion from Active Learning Exploration of 16 Million Catalysts

Despite decades of effort, no earth-abundant homogeneous catalysts have been discovered that can selectively oxidize methane to methanol. We exploit active learning to simultaneously optimize methane activation and methanol release calculated with machine learning-accelerated density functional theory in a space of 16 M candidate catalysts including novel macrocycles. By constructing macrocycles from fragments inspired by synthesized compounds, we ensure synthetic realism in our computational search. Our large-scale search reveals that low-spin Fe(II) compounds paired with strong-field (e.g., P or S-coordinating) ligands have among the best energetic tradeoffs between hydrogen atom transfer (HAT) and methanol release. This observation contrasts with prior efforts that have focused on high-spin Fe(II) with weak-field ligands. By decoupling equatorial and axial ligand effects, we determine that negatively charged axial ligands are critical for more rapid release of methanol and that higher-valency metals [i.e., M(III) vs M(II)] are likely to be rate-limited by slow methanol release. With full characterization of barrier heights, we confirm that optimizing for HAT does not lead to large oxo formation barriers. Energetic span analysis reveals designs for an intermediate-spin Mn(II) catalyst and a low-spin Fe(II) catalyst that are predicted to have good turnover frequencies. Our active learning approach to optimize two distinct reaction energies with efficient global optimization is expected to be beneficial for the search of large catalyst spaces where no prior designs have been identified and where linear scaling relationships between reaction energies or barriers may be limited or unknown.

Oriented internal electrostatic fields: an emerging design element in coordination chemistry and catalysis

The power of oriented electrostatic fields (ESFs) to influence chemical bonding and reactivity is a phenomenon of rapidly growing interest. The presence of strong ESFs has recently been implicated as one of the most significant contributors to the activity of select enzymes, wherein alignment of a substrate's changing dipole moment with a strong, local electrostatic field has been shown to be responsible for the majority of the enzymatic rate enhancement. Outside of enzymology, researchers have studied the impacts of "internal" electrostatic fields via the addition of ionic salts to reactions and the incorporation of charged functional groups into organic molecules (both experimentally and computationally), and "externally" via the implementation of bulk fields between electrode plates. Incorporation of charged moieties into homogeneous inorganic complexes to generate internal ESFs represents an area of high potential for novel catalyst design. This field has only begun to materialize within the past 10 years but could be an area of significant impact moving forward, since it provides a means for tuning the properties of molecular complexes via a method that is orthogonal to traditional strategies, thereby providing possibilities for improved catalytic conditions and novel reactivity. In this perspective, we highlight recent developments in this area and offer insights, obtained from our own research, on the challenges and future directions of this emerging field of research.

Structure and Reactivity of One- and Two-Electron Oxidized Manganese(V) Nitrido Complexes Bearing a Bulky Corrole Ligand

As a strategy to design stable but highly reactive metal nitrido species, we have synthesized a manganese(V) nitrido complex bearing a bulky corrole ligand, [Mn^V(N)(TTPPC)]^- (1, TTPPC is the trianion of 5,10,15-Tris(2,4,6-triphenylphenyl)corrole). Complex 1 is readily oxidized by 1 equiv of Cp₂Fe⁺ to give the neutral complex 2, which can be further oxidized by 1 equiv of [(p-Br-C₆H₄)₃N^•+][B(C₆F₅)₄] to afford the cationic complex 3. All three complexes are stable in the solid state and in CH₂Cl₂ solution, and their molecular structures have been determined by X-ray crystallography. Spectroscopic and theoretical studies indicate that complexes 2 and 3 are best formulated as Mn(V) nitrido π-cation corrole [Mn^V(N)(TTPPC^+•)] and Mn(V) nitrido π-dication corrole [Mn^V(N)(TTPPC²⁺)]⁺, respectively. Complex 3 is the most reactive N atom transfer reagent among isolated nitrido complexes; it reacts with PPh₃ and styrene with second-order rate constants of 2.12 × 10⁵ and 1.95 × 10^-2 M^-1 s^-1, respectively, which are >10⁷ faster than that of 2.

A guide to secondary coordination sphere editing

This tutorial review showcases recent (2015-2021) work describing ligand construction as it relates to the design of secondary coordination spheres (SCSs). Metalloenzymes, for example, utilize SCSs to stabilize reactive substrates, shuttle small molecules, and alter redox properties, promoting functional activity. In the realm of biomimetic chemistry, specific incorporation of SCS residues (e.g., Brønsted or Lewis acid/bases, crown ethers, redox groups etc.) has been shown to be equally critical to function. This contribution illustrates how fundamental advances in organic and inorganic chemistry have been used for the construction of such SCSs. These imaginative contributions have driven exciting findings in many transformations relevant to clean fuel generation, including small molecule (e.g., H⁺, N₂, CO₂, NO_x, O₂) reduction. In most cases, these reactions occur cooperatively, where both metal and ligand are requisite for substrate activation.

Formation of the N≡N Triple Bond from Reductive Coupling of a Paramagnetic Diruthenium Nitrido Compound

Construction of nitrogen-nitrogen triple bonds via homocoupling of metal nitrides is an important fundamental reaction relevant to a potential Nitrogen Economy. Here, we report that room temperature photolysis of Ru₂(chp)₄N₃ (chp^- = 2-chloro-6-hydroxypyridinate) in CH₂Cl₂ produces N₂ via reductive coupling of Ru₂(chp)₄N nitrido species. Computational analysis reveals that the nitride coupling transition state (TS) features an out-of-plane "zigzag" geometry instead of the anticipated planar zigzag TS. However, with intentional exclusion of dispersion correction, the planar zigzag TS geometry can also be found. Both the out-of-plane and planar zigzag TS geometries feature two important types of orbital interactions: (1) donor-acceptor interactions involving intermolecular donation of a nitride lone pair into an empty Ru-N π* orbital and (2) Ru-N π to Ru-N π* interactions derived from coupling of nitridyl radicals. The relative importance of these two interactions is quantified both at and after the TS. Our analysis shows that both interactions are important for the formation of the N-N σ bond, while radical coupling interactions dominate the formation of N-N π bonds. Comparison is made to isoelectronic Ru₂-oxo compounds. Formation of an O-O bond via bimolecular oxo coupling is not observed experimentally and is calculated to have a much higher TS energy. The major difference between the nitrido and oxo systems stems from an extremely large driving force, ∼-500 kJ/mol, for N-N coupling vs a more modest driving force for O-O coupling, -40 to -140 kJ/mol.

Cationic Effects on the Net Hydrogen Atom Bond Dissociation Free Energy of High-Valent Manganese Imido Complexes

Local electric fields can alter energy landscapes to impart enhanced reactivity in enzymes and at surfaces. Similar fields can be generated in molecular systems using charged functionalities. Manganese(V) salen nitrido complexes (salen = N,N'-ethylenebis(salicylideneaminato)) appended with a crown ether unit containing Na+ (1-Na), K+, (1-K), Ba2+ (1-Ba), Sr2+ (1-Sr), La3+ (1-La), or Eu3+ (1-Eu) cation were investigated to determine the effect of charge on pKa, E1/2, and the net bond dissociation free energy (BDFE) of N-H bonds. The series, which includes the manganese(V) salen nitrido without an appended crown, spans 4 units of charge. Bounds for the pKa values of the transient imido complexes were used with the Mn(VI/V) reduction potentials to calculate the N-H BDFEs of the imidos in acetonitrile. Despite a span of >700 mV and >9 pKa units across the series, the hydrogen atom BDFE only spans ∼6 kcal/mol (between 73 and 79 kcal/mol). These results suggest that the incorporation of cationic functionalities is an effective strategy for accessing wide ranges of reduction potentials and pKa values while minimally affecting the BDFE, which is essential to modulating electron, proton, or hydrogen atom transfer pathways.

Iron Complexes of a Proton-Responsive SCS Pincer Ligand with a Sensitive Electronic Structure

Sulfur/carbon/sulfur pincer ligands have an interesting combination of strong-field and weak-field donors, a coordination environment that is also present in the nitrogenase active site. Here, we explore the electronic structures of iron(II) and iron(III) complexes with such a pincer ligand, bearing a monodentate phosphine, thiolate S donor, amide N donor, ammonia, or CO. The ligand scaffold features a proton-responsive thioamide site, and the protonation state of the ligand greatly influences the reduction potential of iron in the phosphine complex. The N-H bond dissociation free energy, derived from the Bordwell equation, is 56 ± 2 kcal/mol. Electron paramagnetic resonance (EPR) spectroscopy and superconducting quantum interference device (SQUID) magnetometry measurements show that the iron(III) complexes with S and N as the fourth donors have an intermediate spin (S = 3/2) ground state with a large zero field splitting, and X-ray absorption spectra show a high Fe-S covalency. The Mössbauer spectrum changes drastically with the position of a nearby alkali metal cation in the iron(III) amido complex, and density functional theory calculations explain this phenomenon through a change between having the doubly occupied orbital as dz2 or dyz, as the former is more influenced by the nearby positive charge.

Strategies for Breaking Molecular Scaling Relationships for the Electrochemical CO2 Reduction Reaction

The electrocatalytic CO2 reduction reaction (CO2RR) is a promising strategy for converting CO2 to fuels and value-added chemicals using renewable energy sources. Molecular electrocatalysts show promise for the selective conversion...

Elaboration on the Electronics of Salen Manganese Nitrides: Investigations into Alkoxy-Substituted Ligand Scaffolds

The ligand electronics of salen manganese nitride complexes directly influence the locus of oxidation and, thus, the reactivity of the resulting oxidized species. This work investigates the influence of tert-butoxy, isopropoxy, and methoxy substituents on the electronics of salen manganese nitride species and includes the first documentation of the para Hammett value for the tert-butoxy substituent (σ_para = -0.13 ± 0.03). Each alkoxy-substituted complex undergoes metal-based oxidation to form manganese(VI), and the kinetics of bimolecular homocoupling to form N₂ were assessed by cyclic voltammetry. Bis-oxidation of the manganese complexes was investigated at low temperature using cyclic voltammery and UV-vis-near-IR spectroscopy, and in combination with theoretical calculations, plausible electronic structures of the dications are provided.

Structure and Reactivity of a Manganese(VI) Nitrido Complex Bearing a Tetraamido Macrocyclic Ligand

Manganese complexes in +6 oxidation state are rare. Although a number of Mn(VI) nitrido complexes have been generated in solution via one-electron oxidation of the corresponding Mn(V) nitrido species, they are too unstable to isolate. Herein we report the isolation and the X-ray structure of a Mn(VI) nitrido complex, [Mn^VI(N)(TAML)]^- (2), which was obtained by one-electron oxidation of [Mn^V(N)(TAML)]^2- (1). 2 undergoes N atom transfer to PPh₃ and styrenes to give Ph₃P═NH and aziridines, respectively. A Hammett study for various p-substituted styrenes gives a V-shaped plot; this is rationalized by the ability of 2 to function as either an electrophile or a nucleophile. 2 also undergoes hydride transfer reactions with NADH analogues, such as 10-methyl-9,10-dihydroacridine (AcrH₂) and 1-benzyl-1,4-dihydronicotinamide (BNAH). A kinetic isotope effect of 7.3 was obtained when kinetic studies were carried out with AcrH₂ and AcrD₂. The reaction of 2 with NADH analogues results in the formation of [Mn^V(N)(TAML-H⁺)]^- (3), which was characterized by ESI/MS, IR spectroscopy, and X-ray crystallography. These results indicate that this reaction occurs via an initial "separated CPET" (separated concerted proton-electron transfer) mechanism; that is, there is a concerted transfer of 1 e^- + 1 H⁺ from AcrH₂ (or BNAH) to 2, in which the electron is transferred to the Mn^VI center, while the proton is transferred to a carbonyl oxygen of TAML rather than to the nitrido ligand.

Heterodinuclear Zn(II), Mg(II) or Co(III) with Na(I) Catalysts for Carbon Dioxide and Cyclohexene Oxide Ring Opening Copolymerizations

A series heterodinuclear catalysts, operating without co-catalyst, show good performances for the ring opening copolymerization (ROCOP) of cyclohexene oxide and carbon dioxide. The complexes feature a macrocyclic ligand designed to coordinate metals such as Zn(II), Mg(II) or Co(III), in a Schiff base 'pocket', and Na(I) in a modified crown-ether binding 'pocket'. The 11 new catalysts are used to explore the influences of the metal combinations and ligand backbones over catalytic activity and selectivity. The highest performance catalyst features the Co(III)Na(I) combination, [N,N'-bis(3,3'-triethylene glycol salicylidene)-1,2-ethylenediamino cobalt(III) di(acetate)]sodium (7), and it shows both excellent activity and selectivity at 1 bar carbon dioxide pressure (TOF=1590 h-1 , >99 % polymer selectivity, 1 : 10: 4000, 100 °C), as well as high activity at higher carbon dioxide pressure (TOF=4343 h-1 , 20 bar, 1 : 10 : 25000). Its rate law shows a first order dependence on both catalyst and cyclohexene oxide concentrations and a zeroth order for carbon dioxide pressure, over the range 10-40 bar. These new catalysts eliminate any need for ionic or Lewis base co-catalyst and instead exploit the coordination of earth-abundant and inexpensive Na(I) adjacent to a second metal to deliver efficient catalysis. They highlight the potential for well-designed ancillary ligands and inexpensive Group 1 metals to deliver high performance heterodinuclear catalysts for carbon dioxide copolymerizations and, in future, these catalysts may also show promise in other alternating copolymerization and carbon dioxide utilizations.

Redox-Controlled and Reversible N-N Bond Forming and Splitting with an IronIV Terminal Imido Ligand

Oxidation of the low-spin Fe^IV imido complex [{(^tBupyrr)₂py}Fe═NAd] (1) ((^tBupyrr)₂py^2- = 2,6-bis(3,5-di-tert-butyl-pyrrolyl)pyridine, Ad = 1-adamantyl) with AgOAc or AgNO₃ promotes reductive N-N bond coupling of the former imido nitrogen with a pyrrole nitrogen to form the respective ferric hydrazido-like pincer complexes [{(^tBupyrrNAd)(^tBupyrr)py}Fe(κ²-X)] (X = OAc^-, 2^OAc; NO₃^-, 2^NO₃). Reduction of 2^OAc with KC₈ cleaves the N-N bond to reform the Fe^IV imido ligand in 1, whereas acid-mediated demetalation of 2^OAc or 2^NO₃ yields the free hydrazine ligand [(^tBupyrrNHAd)(^tBupyrrH)py] (3), the latter of which can be used as a direct entry to the iron imido complex when treated with [Fe{N(SiMe₃)₂}₂]. In addition to characterizing these Fe systems, we show how this nitrene transfer strategy can be expanded to Co for the one-step synthesis of Co{(^tBu-NHAdpyrr)(^tBupyrr)py}] (4) ((^tBu-NHAdpyrr)(^tBupyrr)py^2- = 2-(3-tBu-5-(1-adamantylmethyl-2-methylpropane-2-yl)-pyrrol-2-yl)-6-(3,5-tBu₂-pyrrol-2-yl)-pyridine).

Oriented Electrostatic Effects on O2 and CO2 Reduction by a Polycationic Iron Porphyrin

Next-generation energy technologies require improved methods for rapid and efficient chemical-to-electrical energy transformations. One new approach has been to include atomically positioned, electrostatic motifs in molecular catalysts to stabilize high-energy, charged intermediates. For example, an iron porphyrin bearing four cationic, o-N,N,N-trimethylanilinium groups (o-[N(CH₃)₃]⁺) has recently been used to catalyze the complex, multistep O₂ and CO₂ reduction reactions (ORR and CO₂RR) with fast rates and at low overpotentials. The success of this catalyst is attributed, at least in part, to specific charge-charge interactions between the atomically positioned o-[N(CH₃)₃]⁺ groups and the bound substrate. However, by nature of the mono-ortho substitution pattern, there are four possible atropisomers of this metalloporphyrin and thus four unique electrostatic environments. This work reports that each of the four individual atropisomers catalyzes both the ORR and CO₂RR with fast rates and low overpotentials. The maximum turnover frequencies vary among the atropisomers, by a factor of 60 for the ORR and a factor of 5 for CO₂RR. For the ORR, the αβαβ isomer is the fastest and has the highest overpotential, while for the CO₂RR the αααα isomer is the fastest and has the highest overpotential. The role of charge positioning is complex and can affect more than a single step such as CO₂ binding. These data offer a first-of-a-kind perspective on atomically positioned charge and highlight the significance of high charge density, rather than orientation, on the thermodynamics and kinetics of multistep molecular electrochemical transformations.

Using internal electrostatic fields to manipulate the valence manifolds of copper complexes

A series of tetradentate tris(phosphinimine) ligands (^R3P₃tren) was developed and bound to Cu^I to form the trigonal pyramidal, C_3v-symmetric cuprous complexes [^R3P₃tren-Cu][BAr^F₄] (1PR3) (PR₃ = PMe₃, PMe₂Ph, PMePh₂, PPh₃, PMe₂(NEt₂), BAr^F₄ = B(C₆F₅)₄). Electrochemical studies on the Cu^I complexes were undertaken, and the permethylated analog, 1PMe3, was found to display an unprecedentedly cathodic Cu^I/Cu^II redox potential (−780 mV vs. Fc/Fc⁺ in isobutyronitrile). Elucidation of the electronic structures of 1PR3via density functional theory (DFT) studies revealed atypical valence manifold configurations, resulting from strongly σ-donating phosphinimine moieties in the xy-plane that destabilize 2e (d_xy/d_x²−y²) orbital sets and uniquely stabilized a₁ (d_z²) orbitals. Support is provided that the a₁ stabilizations result from intramolecular electrostatic fields (ESFs) generated from cationic character on the phosphinimine moieties in ^R3P₃tren. This view is corroborated via 1-dimensional electrostatic potential maps along the z-axes of 1PR3 and their isostructural analogues. Experimental validation of this computational model is provided upon oxidation of 1PMe3 to the cupric complex [^Me3P₃tren-Cu][OTf]₂ (2PMe3), which displays a characteristic Jahn–Teller distortion in the form of a see-saw, pseudo-C_s-symmetric geometry. A systematic anodic shift in the potential of the Cu^I/Cu^II redox couple as the steric bulk in the secondary coordination sphere increases is explained through the complexes' diminishing ability to access the ideal C_s-symmetric geometry upon oxidation. The observations and calculations discussed in this work support the presence of internal electrostatic fields within the copper complexes, which subsequently influence the complexes' properties via a method orthogonal to classic ligand field tuning.

Secondary coordination sphere electrostatic effects tune the valence manifolds of copper centers, impacting molecular geometries, photophysical properties, and redox potentials.

Stepwise assembly of heterobimetallic complexes: synthesis, structure, and physical properties

Bimetallic active sites are ubiquitous in metalloenzymes and have sparked investigations of synthetic models to aid in the establishment of structure-function relationship. We previously reported a series of discrete bimetallic complexes with [FeIII-(μ-OH)-MII] cores in which the ligand framework provides distinct binding sites for two metal centers. The formation of these complexes relied on a stepwise synthetic approach in which an FeIII-OH complex containing a sulfonamido tripodal ligand served as a synthon that promoted assembly. We have utilized this approach in the present study to produce a new series of bimetallic complexes with [FeIII-(μ-OH)-MII] cores (M = Ni, Cu, Zn) by using an ancillary ligand to the FeIII center that contains phosphinic amido groups. Assembly began with formation of an FeIII-OH that was subsequently used to bind the MII fragment that contained a triazacyclononane ligand. The series of bimetallic complexes were charactered structurally by X-ray diffraction methods, spectroscopically by absorption, vibrational, electron paramagnetic resonance spectroscopies, and electrochemically by cyclic voltammetry. A notable finding is that these new [FeIII-(μ-OH)-MII] complexes displayed significantly lower reduction potentials than their sulfonamido counterparts, which paves way for future studies on high valent bimetallic complexes in this scaffold.

Co(III)/Alkali-Metal(I) Heterodinuclear Catalysts for the Ring-Opening Copolymerization of CO2 and Propylene Oxide

The ring-opening copolymerization of carbon dioxide and propene oxide is a useful means to valorize waste into commercially attractive poly(propylene carbonate) (PPC) polyols. The reaction is limited by low catalytic activities, poor tolerance to a large excess of chain transfer agent, and tendency to form byproducts. Here, a series of new catalysts are reported that comprise heterodinuclear Co(III)/M(I) macrocyclic complexes (where M(I) = Group 1 metal). These catalysts show highly efficient production of PPC polyols, outstanding yields (turnover numbers), quantitative carbon dioxide uptake (>99%), and high selectivity for polyol formation (>95%). The most active, a Co(III)/K(I) complex, shows a turnover frequency of 800 h-1 at low catalyst loading (0.025 mol %, 70 °C, 30 bar CO2). The copolymerizations are well controlled and produce hydroxyl telechelic PPC with predictable molar masses and narrow dispersity (Đ < 1.15). The polymerization kinetics show a second order rate law, first order in both propylene oxide and catalyst concentrations, and zeroth order in CO2 pressure. An Eyring analysis, examining the effect of temperature on the propagation rate coefficient (kp), reveals the transition state barrier for polycarbonate formation: ΔG‡ = +92.6 ± 2.5 kJ mol-1. The Co(III)/K(I) catalyst is also highly active and selective in copolymerizations of other epoxides with carbon dioxide.

Ligand architecture for triangular metal complexes: a high oxidation state Ni3 cluster with proximal metal arrangement

A new multidentate tetraanionic ligand platform for supporting trinuclear transition metal clusters has been developed. Two trisphenoxide phosphinimide ligands bind three Ni centers in a triangular arrangement. The phosphinimide donors bridge in μ3 fashion and the phenoxides complete a pseudo-square planar coordination sphere around each metal center. Electrochemical studies reveal two pseudo-reversible oxidation events at notably low potentials (-0.80 V and +0.05 V). The one electron oxidized species was characterized structurally, and it is assigned as a NiIII-containing cluster.

Enantioselective Catalysis of an Anionic Oxy-Cope Rearrangement Enabled by Synergistic Ion Binding

Charge-accelerated rearrangements present interesting challenges to enantioselective catalysis, due in large part to the competing requirements for maximizing reactivity (ion-pair separation) and stereochemical communication. Herein, we describe application of a synergistic ion-binding strategy to catalyze the anionic oxy-Cope rearrangement of a symmetric bis-styrenyl allyl alcohol in up to 75:25 e.r. Structure-reactivity-selectivity relationship studies, including linear free-energy-relationship analyses, with bifunctional urea catalysts indicate that H-bonding and cation-binding interactions act cooperatively to promote the chemo- and enantioselective [3,3]-rearrangement. Implications for catalyst designs applicable to other transformations involving oxyanionic intermediates are discussed.

Revealing a Decisive Role for Secondary Coordination Sphere Nucleophiles on Methane Activation

Density functional theory and ab initio calculations indicate that nucleophiles can significantly reduce enthalpic barriers to methane C-H bond activation. Valence bond analysis suggests the formation of a two-center three-electron bond as the origin for the catalytic nucleophile effect. A predictive model for methane activation catalysis follows, which suggests that strongly electron-attracting and electron-rich radicals, together with both a negatively charged and strongly electron-donating outer sphere nucleophile, result in the lowest reaction barriers. It is corroborated by the sensitivity of the calculated C-H activation barriers to the external nucleophile and to continuum solvent polarity. More generally, from the present studies, one may propose proteins with hydrophobic active sites, available strong nucleophiles, and hydrogen bond donors as attractive targets for engineering novel methane functionalizing enzymes.

Effect of Lewis Acids on the Structure and Reactivity of a Mononuclear Hydroxomanganese(III) Complex

The addition of Sc(OTf)₃ and Al(OTf)₃ to the mononuclear Mn^III-hydroxo complex [Mn^III(OH)(dpaq)]⁺ (1) gives rise to new intermediates with spectroscopic properties and chemical reactivity distinct from those of [Mn^III(OH)(dpaq)]⁺. The electronic absorption spectra of [Mn^III(OH)(dpaq)]⁺ in the presence of Sc(OTf)₃ (1-Sc^III) and Al(OTf)₃ (1-Al^III) show modest perturbations in electronic transition energies, consistent with moderate changes in the Mn^III geometry. A comparison of ¹H NMR data for 1 and 1-Sc^III confirm this conclusion, as the ¹H NMR spectrum of 1-Sc^III shows the same number of hyperfine-shifted peaks as the ¹H NMR spectrum of 1. These ¹H NMR spectra, and that of 1-Al^III, share a similar chemical-shift pattern, providing firm evidence that these Lewis acids do not cause gross distortions to the structure of 1. Mn K-edge X-ray absorption data for 1-Sc^III provide evidence of elongation of the axial Mn-OH and Mn-N(amide) bonds relative to those of 1. In contrast to these modest spectroscopic perturbations, 1-Sc^III and 1-Al^III show greatly enhanced reactivity toward hydrocarbons. While 1 is unreactive toward 9,10-dihydroanthracene (DHA), 1-Sc^III and 1-Al^III react rapidly with DHA (k₂ = 0.16(1) and 0.25(2) M^-1 s^-1 at 50 °C, respectively). The 1-Sc^III species is capable of attacking the much stronger C-H bond of ethylbenzene. The basis for these perturbations to the spectroscopic properties and reactivity of 1 in the presence of these Lewis acids was elucidated by comparing properties of 1-Sc^III and 1-Al^III with the recently reported Mn^III-aqua complex [Mn^III(OH₂)(dpaq)]²⁺ ( J. Am. Chem. Soc. 2018, 140, 12695-12699). Because 1-Sc^III and 1-Al^III show ¹H NMR spectra essentially identical to that of [Mn^III(OH₂)(dpaq)]²⁺, the primary effect of these Lewis acids on 1 is protonation of the hydroxo ligand caused by an increase in the Brønsted acidity of the solution.