Low‐Coordinate Barium Boryloxides: Synthesis and Dehydrocoupling Catalysis for the Production of Borasiloxanes

Bis(diiminate)-based boron difluoro complexes: effective synthon for bis(borenium) cations

A series of boron difluoro bis(diiminate) complexes have been prepared and used to obtain triflate substituted fluoroborane complexes. The corresponding well-defined bis(borenium) cations were subsequently synthesized and structurally authenticated. We are also presenting the first experimental and theoretical study of bis(borenium) cations that are derivative of cationic borinic acid.

Barium phosphidoboranes and related calcium complexes

The attempted synthesis of [{Carb}BaPPh2] (1) showed this barium-phosphide and its thf adducts, 1·thf and 1·(thf)2, to be unstable in solution. Our strategy to circumvent the fragility of these compounds involved the use of phosphinoboranes HPPh2·BH3 and HPPh2·B(C6F5)3 instead of HPPh2. This allowed for the synthesis of [{Carb}Ae{PPh2·BH3}] (Ae = Ba, 2; Ca, 3), [{Carb}Ca{(H3B)2PPh2}·(thf)] (4), [{Carb}Ba{PPh2·B(C6F5)3}] (5), [{Carb}Ba{O(B(C6F5)3)CH2CH2CH2CH2PPh2}·thf] (6), [Ba{O(B(C6F5)3)CH2CH2CH2CH2PPh2}2·(thf)1.5] (7) and [Ba{PPh2·B(C6F5)3}2·(thp)2] (8) that were characterised by multinuclear NMR spectroscopy (thp = tetrahydropyran). The molecular structures of 4, 6 and 8 were validated by X-ray diffraction crystallography, which revealed the presence of Ba⋯F stabilizing interactions (ca. 9 kcal mol-1) in the fluorine-containing compounds. Compounds 6 and 7 were obtained upon ring-opening of thf by their respective precursors, 5 and the in situ prepared [Ba{PPh2·B(C6F5)3}2]n. By contrast, thp does not undergo ring-opening under the same conditions but affords clean formation of 8. DFT analysis did not highlight any specific weakness of the Ba-P bond in 1·(thf)2. The instability of this compound is instead thought to stem from the high energy of its HOMO, which contains the non-conjugated P lone pair and features significant nucleophilic reactivity.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Supramolecular Chirality from Hierarchical Self-Assembly of Atomically Precise Silver Nanoclusters Induced by Secondary Metal Coordination

Chiral assembly of metal nanoparticles (NPs) into complex superstructures has been widely studied, but their formation mechanisms still remain mysterious due to the lack of precise structural information from the metal-organic interface to metallic kernel. As "molecular models" of metal NPs, atomically precise metal nanoclusters (NCs) used in the assembly of a macroscale superstructure will provide details of microscopic structure for deep understanding of such highly sophisticated assemblies; however, chiral superstructures have not been realized starting from achiral metal NCs with atomic precision. Herein, we report the supramolecular assembly of a water-soluble silver NC ((NH₄)₉[Ag₉(mba)₉], H₂mba = 2-mercaptobenzoic acid, abbreviated as Ag₉-NCs hereafter) into chiral hydrogels induced by the coordination of secondary metal ions. Single crystal X-ray diffraction reveals the triskelion-like structure of Ag₉-NCs with a pseudochiral conformation caused by special arrangement of the peripheral mba^2- ligands. The enantioselective orientation of the peripheral carboxyl group facilitates the assembly of Ag₉-NCs into nanotubes with a chiral cubic (I*) lattice when coordinating to Ba²⁺. The nanotubes can further intertwine into one-dimensional chiral nanobraids with a preferred left-handed arrangement. These multiple levels of chirality can be tuned by drying, during which the I* phase is missing but the chiral entanglement of the nanotubes is enhanced. Through the gelation of atomically precise, achiral NCs coordination of secondary metal ions, chiral amplification of superstructures was realized. The origination of the chirality at different length scales was also discussed.

Bonding in Barium Boryloxides, Siloxides, Phenoxides and Silazides: A Comparison with the Lighter Alkaline Earths

Barium complexes ligated by bulky boryloxides [OBR₂ ]^- (where R=CH(SiMe₃ )₂ , 2,4,6-ⁱ Pr₃ -C₆ H₂ or 2,4,6-(CF₃ )₃ -C₆ H₂ ), siloxide [OSi(SiMe₃ )₃ ]^- , and/or phenoxide [O-2,6-Ph₂ -C₆ H₃ ]^- , have been prepared. A diversity of coordination patterns is observed in the solid state for both homoleptic and heteroleptic complexes, with coordination numbers ranging between 2 and 4. The identity of the bridging ligand in heteroleptic dimers [Ba(μ₂ -X₁ )(X₂ )]₂ depends largely on the given pair of ligands X₁ and X₂ . Experimentally, the propensity to fill the bridging position increases according to [OB{CH(SiMe₃ )₂ }₂ )]^- <[N(SiMe₃ )₂ ]^- <[OSi(SiMe₃ )₃ ]^- <[O(2,6-Ph₂ -C₆ H₃ )]^- <[OB(2,4,6-ⁱ Pr₃ -C₆ H₂ )₂ ]^- . This trend is the overall expression of 3 properties: steric constraints, electronic density and σ- and π-donating capability of the negatively charged atom, and ability to generate Ba ⋅ ⋅ ⋅ F, Ba ⋅ ⋅ ⋅ C(π) or Ba ⋅ ⋅ ⋅ H-C secondary interactions. The comparison of the structural motifs in the complexes [Ae{μ₂ -N(SiMe₃ )₂ }(OB{CH(SiMe₃ )₂ }₂ )]₂ (Ae = Mg, Ca, Sr and Ba) suggest that these observations may be extended to all alkaline earths. DFT calculations highlight the largely prevailing ionic character of ligand-Ae bonding in all compounds. The ionic character of the Ae-ligand bond encourages bridging coordination, whereas the number of bridging ligands is controlled by steric factors. DFT computations also indicate that in [Ba(μ₂ -X₁ )(X₂ )]₂ heteroleptic dimers, ligand predilection for bridging vs. terminal positions is dictated by the ability to establish secondary interactions between the metals and the ligands.

Alkaline-earth complexes with macrocyclic-functionalised bis(phenolate)s and bis(fluoroalkoxide)s

The synthesis and structural features of several families of unsolvated molecular complexes of the heavy alkaline earths (Ae = calcium, strontium and barium) supported by bis(phenolate)s or bis(fluoroalkoxide)s are described. These dianionic, multidentate ligands are built around diaza-macrocycles that contain either five or six N- and O-heteroatoms. Several of these complexes have been characterised by X-ray diffraction crystallography. A list of comparative features was drawn upon close examination of the molecular structures of these complexes. It highlights the subtle influences of the identity of the central Ae metal, denticity and nature -fluoroalkoxide vs. phenolate- of the anionic tethers in the ligands. All complexes are seven- or eight-coordinate. It is observed in particular that a decrease of the number of heteroatoms in the macrocyclic backbone of the ligand will be compensated by the establishment of intramolecular AeF interactions (accounting for ca. 3.8-6.4% of the pertaining coordination spheres according to bond valence sum analysis), dimerisation of the complex, or, in one case, solvent (thf) retention. Attempts to gauge the Lewis acidity in these series of complexes were carried out by three independent methods (Childs, Gutmann-Beckett and global electrophilicity index). However, conflicting results were obtained and no clear trend can be delineated, even if on the whole, these measurements concur to suggest relatively low Lewis acidity.

Synthesis and reactivity of alkaline-earth stannanide complexes by hydride-mediated distannane metathesis and organostannane dehydrogenation

The synthesis of heteroleptic complexes with calcium- and magnesium-tin bonds is described. The dimeric β-diketiminato calcium hydride complex, [(BDI)Ca(μ-H)]2 (ICa) reacts with Ph3Sn-SnPh3 to provide the previously reported μ2-H bridged calcium stannanide dimer, [(BDI)2Ca2(SnPh3)(μ-H)] (3). Computational assessment of this reaction supports a mechanism involving a hypervalent stannate intermediate formed by nucleophilic attack of hydride on the distannane. Monomeric calcium stannanides, [(BDI)Ca(SnPh3)·OPPh3] (8·OPPh3) and [(BDI)Ca(SnPh3)·TMTHF] (8·TMTHF, TMTHF = 2,2,5,5-tetramethyltetrahydrofuran) were obtained from ICa and Ph3Sn-SnPh3, after addition OPPh3 or TMTHF. Both complexes were also synthesised by deprotonation of Ph3SnH by ICa in the presence of the Lewis base. The calcium and magnesium THF adducts, [(BDI)Ca(SnPh3)·THF2] (8·THF2) and [(BDI)Mg(SnPh3)·THF] (9·THF), were similarly prepared from [(BDI)Ca(μ-H)·(THF)]2 (ICa·THF2) or [(BDI)Mg(μ-H)]2 (IMg) and Ph3SnH. An excess of THF or TMTHF was essential in order to obtain 8·TMTHF, 8·THF2 and 9·THF in high yields whilst avoiding redistribution of the phenyl-tin ligand. The resulting Ae-Sn complexes were used as a source of [Ph3Sn]- in salt metathesis, to provide the known tristannane Ph3Sn-Sn(t-Bu)2-SnPh3 (11). Nucleophilic addition or insertion with N,N'-di-iso-propylcarbodiimide provided the stannyl-amidinate complexes, [(BDI)Mg{(iPrN)2CSnPh3}] (12) and [(BDI)Ca{(iPrN)2CSnPh3}·L] (13·TMTHF, 13·THF, L = TMTHF, THF). The reactions and products were monitored and characterised by multinuclear NMR spectroscopy, whilst for compounds 8, 9, 12, and 13·THF, the X-ray crystal structures are presented and discussed.

Highly Active Superbulky Alkaline Earth Metal Amide Catalysts for Hydrogenation of Challenging Alkenes and Aromatic Rings

Two series of bulky alkaline earth (Ae) metal amide complexes have been prepared: Ae[N(TRIP)2 ]2 (1-Ae) and Ae[N(TRIP)(DIPP)]2 (2-Ae) (Ae=Mg, Ca, Sr, Ba; TRIP=SiiPr3 , DIPP=2,6-diisopropylphenyl). While monomeric 1-Ca was already known, the new complexes have been structurally characterized. Monomers 1-Ae are highly linear while the monomers 2-Ae are slightly bent. The bulkier amide complexes 1-Ae are by far the most active catalysts in alkene hydrogenation with activities increasing from Mg to Ba. Catalyst 1-Ba can reduce internal alkenes like cyclohexene or 3-hexene and highly challenging substrates like 1-Me-cyclohexene or tetraphenylethylene. It is also active in arene hydrogenation reducing anthracene and naphthalene (even when substituted with an alkyl) as well as biphenyl. Benzene could be reduced to cyclohexane but full conversion was not reached. The first step in catalytic hydrogenation is formation of an (amide)AeH species, which can form larger aggregates. Increasing the bulk of the amide ligand decreases aggregate size but it is unclear what the true catalyst(s) is (are). DFT calculations suggest that amide bulk also has a noticeable influence on the thermodynamics for formation of the (amide)AeH species. Complex 1-Ba is currently the most powerful Ae metal hydrogenation catalyst. Due to tremendously increased activities in comparison to those of previously reported catalysts, the substrate scope in hydrogenation catalysis could be extended to challenging multi-substituted unactivated alkenes and even to arenes among which benzene.

Heavier Alkaline-Earth Catalyzed Dehydrocoupling of Silanes and Alcohols for the Synthesis of Metallo-Polysilylethers

The dehydrocoupling of silanes and alcohols mediated by heavier alkaline-earth catalysts, [Ae{N(SiMe₃ )₂ }₂ ⋅(THF)₂ ] (I-III) and [Ae{CH(SiMe₃ )₂ }₂ ⋅(THF)₂ ], (IV-VI) (Ae=Ca, Sr, Ba) is described. Primary, secondary, and tertiary alcohols were coupled to phenylsilane or diphenylsilane, whereas tertiary silanes are less tolerant towards bulky substrates. Some control over reaction selectivity towards mono-, di-, or tri-substituted silylether products was achieved through alteration of reaction stoichiometry, conditions, and catalyst. The ferrocenyl silylether, FeCp(C₅ H₄ SiPh(OBn)₂ ) (2), was prepared and fully characterized from the ferrocenylsilane, FeCp(C₅ H₄ SiPhH₂ ) (1), and benzyl alcohol using barium catalysis. Stoichiometric experiments suggested a reaction manifold involving the formation of Ae-alkoxide and hydride species, and a series of dimeric Ae-alkoxides [(Ph₃ CO)Ae(μ₂ -OCPh₃ )Ae(THF)] (3 a-c, Ae=Ca, Sr, Ba) were isolated and fully characterized. Mechanistic experiments suggested a complex reaction mechanism involving dimeric or polynuclear active species, whose kinetics are highly dependent on variables such as the identity and concentration of the precatalyst, silane, and alcohol. Turnover frequencies increase on descending Group 2 of the periodic table, with the barium precatalyst III displaying an apparent first-order dependence in both silane and alcohol, and an optimum catalyst loading of 3 mol % Ba, above which activity decreases. With precatalyst III in THF, ferrocene-containing poly- and oligosilylethers with ferrocene pendent to- (P1-P4) or as a constituent (P5, P6) of the main polymer chain were prepared from 1 or Fe(C₅ H₄ SiPhH₂ )₂ (4) with diols 1,4-(HOCH₂ )₂ -(C₆ H₄ ) and 1,4-(CH(CH₃ )OH)₂ -(C₆ H₄ ), respectively. The resultant materials were characterized by NMR spectroscopy, gel permeation chromatography (GPC) and DOSY NMR spectroscopy, with estimated molecular weights in excess of 20,000 Da for P1 and P4. The iron centers display reversible redox behavior and thermal analysis showed P1 and P5 to be promising precursors to magnetic ceramic materials.

Mononuclear calcium complex as effective catalyst for alkenes hydrogenation

Mononuclear calcium unsubstituted alkyl complex [(Tp^Ad,iPr)Ca{(CH₂)₄Ph}(THP)], proposed as the catalytic alkene hydrogenation intermediate, was isolated for the first time.

Synthesis and characterization of bis(pyrazolyl)borate Ni(ii) complexes: ligand rearrangement and transformation

Five examples of bis(pyrazolyl)borate Ni(ii) complexes 2-5, exhibiting C-HNi interactions, were readily prepared from the reactions of K[BBN(3-R¹-4-R²-pz)₂] with Ni(ii) precursors (Ni(acac)₂ or NiCl₂(PPh₃)₂) in dichloromethane or toluene. When R¹ = R² = H, complex 2a with square-planar geometry around the Ni centre and showing an unusual C-HNi anagostic interaction was obtained. In contrast, when R¹ = Me, R² = H or R¹ = Me, R² = Br, tetrahedral complexes 3 or 4 were formed preferentially with strong C-HNi agostic interactions, respectively. Additionally, some differences in the formation and transformation of 3 and 4 were also found including a 1,2-borotropic shift during the formation of 3 and a further geometrical transformation from tetrahedral 3 to square-planar 2b by the second 1,2-borotropic shift under continuous heating; in contrast, no ligand change and further conversion were found in 4. When the more hindered 3-ⁱPr-substituted ligand 1d was introduced in the reaction, the hydrolysis and cleavage of one B-N bond in the ligand occurred, leading to the singly hydroxo-bridged complex 5. The experimental and theoretical results indicate that the preference to form a thermodynamically stable complex and then balancing with orbital energy should be the intrinsic reason for the reaction selectivity.

Aminofluoroalkoxide amido and boryloxo lead(ii) complexes

We report here on the utilisation of a readily available bidentate aminofluoroalkoxide in lead(ii) chemistry. Stable heteroleptic three-coordinate complexes can be produced in high yields, including a convenient amido synthetic precursor and a rare case of Pb^II-boryloxide.

An N-Heterocyclic Boryloxy Ligand Isoelectronic with N-Heterocyclic Imines: Access to an Acyclic Dioxysilylene and its Heavier Congeners

Introduced here is a new type of strongly donating N-heterocyclic boryloxy (NHBO) ligand, [(HCDippN)₂ BO]^- (Dipp=2,6-diisopropylphenyl), which is isoelectronic with the well-known N-heterocyclic iminato (NHI) donor class. This 1,3,2-diazaborole functionalized oxy ligand has been used to stabilize the first acyclic two-coordinate dioxysilylene and its Ge, Sn, and Pb congeners, thereby presenting the first complete series of heavier group 14 dioxycarbene analogues. All four compounds have been characterized by X-ray crystallography and density-functional theory, enabling analysis of periodic trends: the potential for the [(HCDippN)₂ BO]^- ligand to subtly vary its electronic-donor capabilities is revealed by snapshots showing the gradual evolution of arene π coordination on going from Si to Pb.