Site-Resolved Cu2 O Catalysis in the Oxidation of CO

Constructing cuprous oxide-modified zinc tetraphenylporphyrin ultrathin nanosheets heterojunction for enhanced photocatalytic carbon dioxide reduction to methane

The application of supermolecular naonostructures in the photocatalytic carbon dioxide reduction reaction (CO2RR) has attracted increasing attentions. However, it still faces significant challenges, such as low selectivity for multi-electron products and poor stability. Here, the cuprous oxide (Cu2O)-modified zinc tetraphenylporphyrin ultrathin nanosheets (ZnTPP NSs) are successfully constructed through the aqueous chemical reaction. Comprehensive characterizations confirm the formation of type-II heterojunction between Cu2O and ZnTPP in Cu2O@ZnTPP, and the electron transfer from Cu2O to ZnTPP through the Zn-O-Cu bond under the static contact. Under the visible-light irradiation (λ > 420 nm), the optimized Cu2O@ZnTPP sample as catalyst for photocatalytic CO2RR exhibits the methane (CH4) evolution rate of 120.9 μmol/g/h, which is ∼ 4 and ∼ 10 times those of individual ZnTPP NSs (28.0 μmol/g/h) and Cu2O (12.8 μmol/g/h), respectively. Meanwhile, the CH4 selectivity of ∼ 98.7 % and excellent stability can be achieved. Further experiments reveal that Cu2O@ZnTPP has higher photocatalytic conversion efficiency than Cu2O and ZnTPP NSs, and the photoinduced electron transfer from ZnTPP to Cu2O can be identified via the path of ZnTPP→ (ZnTPP•ZnTPP)*→ ZnTPP-→ Zn-O-Cu → Cu2O. Consequently, Cu2O@ZnTPP exhibits a shorter electron-hole separation lifetime (3.3 vs. 9.3 ps) and a longer recombination lifetime (23.1 vs. 13.4 ps) than individual ZnTPP NSs. This work provides a strategy to construct the organic nanostructures for photocatalytic CO2RR to multi-electron products.

A versatile magnetic nanocomposite based on cellulose-cyclodextrin hydrogel embedded with graphene oxide and Cu2O nanoparticles for catalytic application

The study focused on creating a novel and environmentally friendly nanocatalyst using cellulose (Cell), β-Cyclodextrin (BCD), graphene oxide (GO), Cu2O, and Fe3O4.The nanocatalyst was prepared by embedding GO and Cu2O into Cell-BCD hydrogel, followed by the in-situ preparation of Fe3O4 magnetic nanoparticles to magnetize the nanocomposite. The effectiveness of this nanocatalyst was evaluated in the one-pot, three-component symmetric Hantzsch reaction for synthesizing 1,4-dihydropyridine derivatives with high yield under mild conditions. This novel nanocatalyst has the potential for broad application in various organic transformations due to its effective catalytic activity, eco-friendly nature, and ease of recovery.

Carbon Quantum Dots/Cu2O Photocatalyst for Room Temperature Selective Oxidation of Benzyl Alcohol

The luminescence properties and excellent carrier transfer ability of carbon quantum dots (CQDs) have attracted much attention in the field of photocatalysis. In this work, we loaded the CQDs on the surface of Cu2O to enhance the visible-light property of Cu2O. Furthermore, the composite was used for selective oxidation of benzyl alcohol to benzaldehyde. The composite catalyst achieved high selectivity (90%) for benzaldehyde at room temperature, leveraging its visible-light-induced electron transfer properties and its photocatalytic activity for hydrogen peroxide decomposition. ·OH was shown to be the main reactive oxygen species in the selective oxidation reaction of benzyl alcohol. The formation of heterostructures of CQDs/Cu2O promoted charge carrier separation and provided a fast channel for photoinduced electron transfer. This novel material exhibited enhanced levels of activity and stability for selective oxidation of benzyl alcohol. Potential applications of carbon quantum dot composites in conventional alcohol oxidation reactions are shown.

The Role of Grain Boundary Sites for the Oxidation of Copper Catalysts during the CO Oxidation Reaction

The oxidation of transition metal surfaces is a process that takes place readily at ambient conditions and that, depending on the specific catalytic reaction at hand, can either boost or hamper activity and selectivity. Cu catalysts are no exception in this respect since they exhibit different oxidation states for which contradicting activities have been reported, as, for example, in the catalytic oxidation of CO. Here, we investigate the impact of low-coordination sites on nanofabricated Cu nanoparticles with engineered grain boundaries on the oxidation of the Cu surface under CO oxidation reaction conditions. Combining multiplexed in situ single particle plasmonic nanoimaging, ex situ transmission electron microscopy imaging, and density functional theory calculations reveals a distinct dependence of particle oxidation rate on grain boundary density. Additionally, we found that the oxide predominantly nucleates at grain boundary-surface intersections, which leads to nonuniform oxide growth that suppresses Kirkendall-void formation. The oxide nucleation rate on Cu metal catalysts was revealed to be an interplay of surface coordination and CO oxidation behavior, with low coordination favoring Cu oxidation and high coordination favoring CO oxidation. These findings explain the observed single particle-specific onset of Cu oxidation as being the consequence of the individual particle grain structure and provide an explanation for widely distributed activity states of particles in catalyst bed ensembles.

Cu Facet-Dependent Elementary Surface Reaction Kinetics of CO2 Hydrogenation to Methanol Catalyzed by ZrO2/Cu Inverse Catalysts

ZrO2-Cu-based catalysts are active in catalyzing the hydrogenation of CO2 to methanol. Herein, we report Cu facet effects on the catalytic performance of ZrO2/Cu inverse catalysts in CO2 hydrogenation to methanol using various Cu nanocrystals with well-defined Cu morphologies and facets. The ZrO2-Cu interface is the active site, in which the ZrO2-Cu{100} and ZrO2-Cu{110} interfaces exhibit similar apparent activation energies of ∼42.6 kJ/mol, smaller than that of the ZrO2-Cu{111} interface (∼64.5 kJ/mol). Temporal in situ diffuse reflectance infrared Fourier transform spectroscopy characterization results identify the bridge formate hydrogenation as the rate-determining elementary surface reaction under typical reaction temperatures, whose activation energy is similar at the ZrO2-Cu{100} (∼36.3 kJ/mol) and ZrO2-Cu{110} (∼40.5 kJ/mol) interfaces and larger at the ZrO2-Cu{111} interface (∼54.5 kJ/mol). This fundamental understanding suggests Cu facet engineering as a promising strategy to improve the catalytic performance of ZrO2/Cu inverse catalysts for CO2 hydrogenation to methanol.

Synthesis of Cu2O Nanoparticles by Ellipse Curve Micromixer

Micromixers offer the advantage of rapid and homogeneous mixing compared with conventional macroscale reaction systems, and thus they show great potential for the synthesis of nanoparticles. An ellipse curve serpentine micromixer, which had been proposed in our prior works was employed to synthesize Cu2O nanoparticles. Cu2O are excellent photocatalysts that have been widely utilized in the degradation of organic dyes. Owing to the excellent mixing performance, the reduction of Cu(OH)2 in micromixing synthesis was more sufficient than that in conventional stirring synthesis. The Cu2O nanoparticles synthesized by micromixing had smaller size and narrower size distribution compared with those synthesized by stirring in a beaker. The smallest Cu2O nanoparticles were obtained by micromixing with Re = 100 at T = 60 °C, while the most uniform Cu2O nanoparticles were obtained at T = 80 °C owing to Ostwald ripening. Through the photocatalytic degradation experiments of Rhodamine B, the Cu2O nanoparticles synthesized by micromixing were found to have better photocatalysis than those synthesized by stirring. The research results showed that the micromixing synthesis was a more suitable choice to produce Cu2O nanoparticles with excellent photocatalysis. The ellipse curve micromixer with a simple structure and high mixing performance can be applied in the synthesis of various nanoparticles.

Synthesis of Cu2O micro/nanocrystals for catalytic combustion of high-concentration CO: The crucial role of glucose

Cubic Cu₂O micro/nanocrystals were successfully synthesized by liquid-phase reduction using copper salt of CuSO₄ or CuCl₂·2H₂O, and glucose or ascorbic acid as reducing agent, respectively. The activity of the catalysts was evaluated by light-off curves of CO self-sustained catalytic combustion via temperature-programmed oxidation of CO (CO-TPO), with the results showing the activity of catalysts following the order of Cu₂O-Cl-GLU > Cu₂O-S-GLU > Cu₂O-S-AA > Cu₂O-Cl-AA, (Cl denotes CuCl₂·2H₂O, GLU denotes glucose, S denotes CuSO₄ and AA denotes ascorbic acid, respectively), corresponding to the ignition temperature of 109 °C, 122 °C, 137 °C and 186 °C, respectively. The crystal structure, elemental valence, morphology and redox property of the prepared catalysts were analyzed by using various characterization techniques. Combined with in situ infrared spectrum, the CO self-sustained catalytic combustion over Cu₂O catalysts mainly follows the Mars-van-Krevelen (M-v-K) mechanism: the adsorbed and activated CO reacts with lattice oxygen to yield CO₂ and oxygen vacancy, and then the oxygen vacancy can be replenished by gaseous oxygen. Combined with catalytic performance of high-concentration CO, it is found that the catalysts prepared using glucose as reducing agent are more angular compared with ascorbic acid. The Cu₂O-Cl-GLU synthesized with glucose and CuCl₂·2H₂O exhibits the best catalytic activity among all the catalysts tested, attributing to its more obvious edge and rough crystal surface. The unique structure of Cu₂O-Cl-GLU leads to the high exposure rate and coordination unsaturation of atoms on the cubic Cu₂O micro/nanocrystals that can improve the ability of activating gaseous O₂ and low temperature reducibility, and consequently facilitating the catalytic activity.

Surface Site-Specific Replacement for Catalysis Selectivity Switching

Surface atom replacement in materials without other composition/structure changes is challenging but is important for fundamental scientific research and for practical applications. In particular, for nanoparticles including nanoclusters, surface metal site-specific replacement with atomic precision has not yet been achieved. In this study, we for the first time achieved surface site-specific antigalvanic replacement with the remaining composition/structure and surface replacement-dependent selectivity in the electrocatalytic reduction of CO₂. Density functional theory (DFT) calculations describe the catalysis selectivity switch induced by replacing Ag with Cu and explain why Cu replacement facilitates C₂ production. Also, CO₂ electroreduction to C₂ on well-defined metal nanoclusters is first reported in this study.

A Density Functional Theory and Microkinetic Study of Acetylene Partial Oxidation on the Perfect and Defective Cu2O (111) Surface Models

The catalytic removal of C2H2 by Cu2O was studied by investigating the adsorption and partial oxidation mechanism of C2H2 on both perfect (stoichiometric) and CuCUS-defective Cu2O (111) surface models using density functional theory calculations. The chemisorption of C2H2 on perfect and defective surface models needs to overcome the energy barrier of 0.70 and 0.81 eV at 0 K. The direct decomposition of C2H2 on both surface models is energy demanding with the energy barrier of 1.92 and 1.62 eV for the perfect and defective surface models, respectively. The H-abstractions of the chemisorbed C2H2 by a series of radicals including H, OH, HO2, CH3, O, and O2 following the Langmuir−Hinshelwood mechanism have been compared. On the perfect Cu2O (111) surface model, the activity order of the adsorbed radicals toward H-abstraction of C2H2 is: OH > O2 > HO2 > O > CH3 > H, while on the defective Cu2O (111) surface model, the activity follows the sequence: O > OH > O2 > HO2 > H > CH3. The CuCUS defect could remarkably facilitate the H-abstraction of C2H2 by O2. The partial oxidation of C2H2 on the Cu2O (111) surface model tends to proceed with the chemisorption process and the following H-abstraction process rather than the direct decomposition process. The reaction of C2H2 H-abstraction by O2 dictates the C2H2 overall reaction rate on the perfect Cu2O (111) surface model and the chemisorption of C2H2 is the rate-determining step on the defective Cu2O (111) surface model. The results of this work could benefit the understanding of the C2H2 reaction on the Cu2O (111) surface and future heterogeneous modeling.

Hierarchical Porous Carbon Nitride-Crumpled Nanosheet-Embedded Copper Single Atoms: An Efficient Catalyst for Carbon Monoxide Oxidation

Rational design of metal single-site embedded porous graphitic carbon nitride (P-g-C₃N₄) nanostructures exploiting maximum atom utilization is warranted to enhance the thermal CO oxidation (CO_Ox) reaction. Herein, a facile, green, one-pot, and template-free approach is developed to fabricate the hierarchical porous P-g-C₃N₄-crumpled ultrathin nanosheets atomically doped with copper single atoms (Cu-P-g-C₃N₄). Mechanistically, the quick protonation of melamine and pyridine under acidic conditions induces deamination to form melem, which is polycondensed under heating. The interconnected pores, high surface area (240 m²g^-1), and maximized exposed isolated Cu atomic active sites (1.8 wt %) coordinated with nitrogen atom P-g-C₃N₄ are the salient features of Cu- P-g-C₃N₄ that endowed complete conversion to CO₂ at 184 °C. In contrast, P-g-C₃N₄ only converted 3.8% of CO even at 350 °C, implying the electronic effect of Cu single atoms. The abundant Cu-nitrogen moieties can drastically weaken the binding affinity of the CO-oxidation (CO_Ox) intermediates and products, thus accelerating the reaction kinetics at a low temperature. This study may promote the fabrication of P-g-C₃N₄ doped with various single atoms for the oxidation of CO.

RAIRS Characterization of CO and O Coadsorption on Cu(111)

In a study preliminary to investigating CO₂ dissociation, we report our results on oxygen and carbon monoxide coadsorption on Cu(111). We use reflection adsorption infrared spectroscopy and Auger electron spectroscopy to characterize and quantify adsorbed species. On clean Cu(111), the CO internal stretch mode appears initially at 2077 cm^-1 for a surface temperature of ∼80 K. We accurately reproduce the previously determined redshift of the absorption band with increasing CO coverage. We subsequently oxidize the surface by exposure to O₂ at 300 K to ensure O₂ dissociation. The band's frequency and line shape of subsequently adsorbed CO at ∼80 K are not affected. However, the maximum absorbance and integrated peak intensities drop with increasing O coverage. The data suggest that CO is not adsorbed near O, likely as a consequence of the mechanism of Cu(111) surface oxidation by O₂ at 300 K. We discuss whether our RAIRS results may be used to quantify CO₂ dissociation in the zero-coverage limit.

Spectrally Resolved Single Particle Photoluminescence Microscopy Reveals Heterogeneous Photocorrosion Activity of Cuprous Oxide Microcrystals

Photocorrosion of cuprous oxide (Cu₂O) has notably limited its application as an efficient photocatalyst. We report a facile approach to visualize in situ formation of copper and oxygen vacancies on the Cu₂O surface under ambient condition. By imaging photoexcited single Cu₂O particles, the resultant photoluminescence generated at Cu₂O surface enable effective localization of copper and oxygen vacancies. Single particle photoluminescence imaging showed substantial heterogeneity in the rate of defect formation at different facets with the truncated corners achieving the fastest initial rate of photooxidation before subsequently changing to the face and edge sites as the photocorrosion proceeds. The generation of copper or oxygen vacancy is proportional to the photoexcitation power, while pH-dependent studies rationalized alkaline conditions for the formation of copper vacancy. Reaction in an electron-hole scavenger system showed that photooxidation and photoreduction will simultaneously occur, yet heterogeneously on the surface of Cu₂O, with rate of copper vacancy formation being fastest.

Room Temperature Engineering Crystal Facet of Cu2O for Photocatalytic Degradation of Methyl Orange

Cuprous oxide (Cu₂O) has received enormous interest for photocatalysis owing to its narrow band gap of 2.17 eV, which is beneficial for visible-light absorption. In this work, we succeeded in synthesizing Cu₂O nanocrystals with two morphologies, cube and sphere, at room temperature via a simple wet-chemistry strategy. The morphologies of Cu₂O change from cube to sphere when adding PVP from 0 g to 4 g and the mainly exposed crystal faces of cubic and spherical Cu₂O are (100) and (111), respectively. The photocatalytic properties of the as-prepared Cu₂O were evaluated by the photocatalytic degradation of methyl orange (MO). Cubic Cu₂O(100) showed excellent photocatalytic activity. After the optical and photoelectric properties were investigated, we found that cubic Cu₂O(100) has better photoelectric separation efficiency than spherical Cu₂O(111). Finally, the possible mechanism was proposed for cubic Cu₂O(100) degrading MO under visible light.

Electronic Metal-Support Interactions Between CuxO and ZnO for CuxO/ZnO Catalysts With Enhanced CO Oxidation Activity

Metal-support interaction has been one of the main topics of research on supported catalysts all the time. However, many other factors including the particle size, shape and chemical composition can have significant influences on the catalytic performance when considering the role of metal-support interaction. Herein, we have designed a series of Cu_xO/ZnO catalysts as examples to quantitatively investigate how the metal-support interaction influences the catalytic performance. The electronic metal-support interactions between Cu_xO and ZnO were regulated successfully without altering the structure of Cu_xO/ZnO catalyst. Due to the lower work function of ZnO, electrons would transfer from ZnO to CuO, which is favorable for the formation of higher active Cu species. Combined experimental and theoretical calculations revealed that electron-rich interface result from interaction was favorable for the adsorption of oxygen and CO oxidation reaction. Such strategy represents a new direction to boost the catalytic activity of supported catalysts in various applications.

The confinement effects of ordered mesoporous carbon on copper nanoparticles for methanol oxidative carbonylation

The confinement of Cu nanoparticles in narrow mesopores strengthens the Cu–carbon interactions. This can promote the auto-reduction of CuO to form active Cu2O species, resulting in high activity and stability during DMC synthesis.

Fine cubic Cu2O nanocrystals as highly selective catalyst for propylene epoxidation with molecular oxygen

Propylene epoxidation with O₂ to propylene oxide is a very valuable reaction but remains as a long-standing challenge due to unavailable efficient catalysts with high selectivity. Herein, we successfully explore 27 nm-sized cubic Cu₂O nanocrystals enclosed with {100} faces and {110} edges as a highly selective catalyst for propylene epoxidation with O₂, which acquires propylene oxide selectivity of more than 80% at 90–110 °C. Propylene epoxidation with weakly-adsorbed O₂ species at the {110} edge sites exhibits a low barrier and is the dominant reaction occurring at low reaction temperatures, leading to the high propylene oxide selectivity. Such a weakly-adsorbed O₂ species is not stable at high reaction temperatures, and the surface lattice oxygen species becomes the active oxygen species to participate in propylene epoxidation to propylene oxide and propylene partial oxidation to acrolein at the {110} edge sites and propylene combustion to CO₂ at the {100} face sites, which all exhibit high barriers and result in decreased propylene oxide selectivity.

Direct propylene epoxidation with O₂ to form propylene oxide (PO) selectively is a challenge. Here, the authors explore 27 nm-sized cubic Cu₂O nanocrystals as thermocatalysts for this reaction which facilitate PO production with high selectivity, >80%, at moderate temperatures of 90–110 °C.

Adjacent single-atom irons boosting molecular oxygen activation on MnO2

Efficient molecular oxygen activation is crucial for catalytic oxidation reaction, but highly depends on the construction of active sites. In this study, we demonstrate that dual adjacent Fe atoms anchored on MnO₂ can assemble into a diatomic site, also called as MnO₂-hosted Fe dimer, which activates molecular oxygen to form an active intermediate species Fe(O = O)Fe for highly efficient CO oxidation. These adjacent single-atom Fe sites exhibit a stronger O₂ activation performance than the conventional surface oxygen vacancy activation sites. This work sheds light on molecular oxygen activation mechanisms of transition metal oxides and provides an efficient pathway to activate molecular oxygen by constructing new active sites through single atom technology.

The active sites of Cu-ZnO catalysts for water gas shift and CO hydrogenation reactions

Cu–ZnO–Al₂O₃ catalysts are used as the industrial catalysts for water gas shift (WGS) and CO hydrogenation to methanol reactions. Herein, via a comprehensive experimental and theoretical calculation study of a series of ZnO/Cu nanocrystals inverse catalysts with well-defined Cu structures, we report that the ZnO–Cu catalysts undergo Cu structure-dependent and reaction-sensitive in situ restructuring during WGS and CO hydrogenation reactions under typical reaction conditions, forming the active sites of Cu_Cu(100)-hydroxylated ZnO ensemble and Cu_Cu(611)Zn alloy, respectively. These results provide insights into the active sites of Cu–ZnO catalysts for the WGS and CO hydrogenation reactions and reveal the Cu structural effects, and offer the feasible guideline for optimizing the structures of Cu–ZnO–Al₂O₃ catalysts.

Identification of active sites of a catalyst is the Holy Grail in heterogeneous catalysis. Here, the authors successfully identify the Cu_Cu(100)- hydroxylated ZnO ensemble and Cu_Cu(611)Zn alloy as the active sites of Cu-ZnO catalysts for water gas shift and CO hydrogenation reactions, respectively.

Converting copper sulfide to copper with surface sulfur for electrocatalytic alkyne semi-hydrogenation with water

Electrocatalytic alkyne semi-hydrogenation to alkenes with water as the hydrogen source using a low-cost noble-metal-free catalyst is highly desirable but challenging because of their over-hydrogenation to undesired alkanes. Here, we propose that an ideal catalyst should have the appropriate binding energy with active atomic hydrogen (H*) from water electrolysis and a weaker adsorption with an alkene, thus promoting alkyne semi-hydrogenation and avoiding over-hydrogenation. So, surface sulfur-doped and -adsorbed low-coordinated copper nanowire sponges are designedly synthesized via in situ electroreduction of copper sulfide and enable electrocatalytic alkyne semi-hydrogenation with over 99% selectivity using water as the hydrogen source, outperforming a copper counterpart without surface sulfur. Sulfur anion-hydrated cation (S²⁻-K⁺(H₂O)_n) networks between the surface adsorbed S²⁻ and K⁺ in the KOH electrolyte boost the production of active H* from water electrolysis. And the trace doping of sulfur weakens the alkene adsorption, avoiding over-hydrogenation. Our catalyst also shows wide substrate scopes, up to 99% alkenes selectivity, good reducible groups compatibility, and easily synthesized deuterated alkenes, highlighting the promising potential of this method.

Highly selective electrocatalytic semi-hydrogenation of alkynes over a noble-metal-free catalyst is highly desirable. Here, authors synthesize sulfur-containing copper nanowire sponges for selective electrocatalytic alkyne semi-hydrogenation using water as the hydrogen source.

Improving the Catalytic CO2 Reduction on Cs2AgBiBr6 by Halide Defect Engineering: A DFT Study

Pb-free double halide perovskites have drawn immense attention in the potential photocatalytic application, due to the regulatable bandgap energy and nontoxicity. Herein, we first present a study for CO2 conversion on Pb-free halide perovskite Cs2AgBiBr6 under state-of-the-art first-principles calculation with dispersion correction. Compared with the previous CsPbBr3, the cell parameter of Cs2AgBiBr6 underwent only a small decrease of 3.69%. By investigating the adsorption of CO, CO2, NO, NO2, and catalytic reduction of CO2, we found Cs2AgBiBr6 exhibits modest adsorption ability and unsatisfied potential determining step energy of 2.68 eV in catalysis. We adopted defect engineering (Cl doping, I doping and Br-vacancy) to regulate the adsorption and CO2 reduction behavior. It is found that CO2 molecule can be chemically and preferably adsorbed on Br-vacancy doped Cs2AgBiBr6 with a negative adsorption energy of -1.16 eV. Studying the CO2 reduction paths on pure and defect modified Cs2AgBiBr6, Br-vacancy is proved to play a critical role in decreasing the potential determining step energy to 1.25 eV. Finally, we probe into the electronic properties and demonstrate Br-vacancy will not obviously promote the process of catalysis deactivation, as there is no formation of deep-level electronic states acting as carrier recombination center. Our findings reveal the process of gas adsorption and CO2 reduction on novel Pb-free Cs2AgBiBr6, and propose a potential strategy to improve the efficiency of catalytic CO2 conversion towards practical implementation.

CO oxidation and organic dyes degradation over graphene-Cu and graphene-CuNi catalysts obtained by solution combustion synthesis

Graphene and its analogs in combination with metal nanopowders are among the most promising catalysts for various industry valuable processes. The newly obtained solution combustion synthesized graphene–Cu and graphene–CuNi nanocomposites were examined in heterogeneous catalysis of thermal activated CO oxidation and photoactivated degradation of acid telon blue and direct blue dyes. The nanocomposites are characterized by a closely connected solution combustion synthesized graphene-metal structure with a number of graphene layers from 1 to 3 and fine metal grains sizes of 31 nm (Cu) and 14 nm (CuNi). The experimental data showed the obtained graphene-metal nanocomposites are among the most effective catalysts for CO oxidation with a temperature of 100% conversion of 150 °C and 200 °C for Cu and CuNi containing catalysts, respectively. At the same time, both nanopowders were found inactive for dyes degradation.

Copper catalysis at operando conditions-bridging the gap between single nanoparticle probing and catalyst-bed-averaging

In catalysis, nanoparticles enable chemical transformations and their structural and chemical fingerprints control activity. To develop understanding of such fingerprints, methods studying catalysts at realistic conditions have proven instrumental. Normally, these methods either probe the catalyst bed with low spatial resolution, thereby averaging out single particle characteristics, or probe an extremely small fraction only, thereby effectively ignoring most of the catalyst. Here, we bridge the gap between these two extremes by introducing highly multiplexed single particle plasmonic nanoimaging of model catalyst beds comprising 1000 nanoparticles, which are integrated in a nanoreactor platform that enables online mass spectroscopy activity measurements. Using the example of CO oxidation over Cu, we reveal how highly local spatial variations in catalyst state dynamics are responsible for contradicting information about catalyst active phase found in the literature, and identify that both surface and bulk oxidation state of a Cu nanoparticle catalyst dynamically mediate its activity.

Carbon Monoxide Oxidation Promoted by Surface Polarization Charges in a CuO/Ag Hybrid Catalyst

Composite structures have been widely utilized to improve material performance. Here we report a semiconductor-metal hybrid structure (CuO/Ag) for CO oxidation that possesses very promising activity. Our first-principles calculations demonstrate that the significant improvement in this system's catalytic performance mainly comes from the polarized charge injection that results from the Schottky barrier formed at the CuO/Ag interface due to the work function differential there. Moreover, we propose a synergistic mechanism underlying the recovery process of this catalyst, which could significantly promote the recovery of oxygen vacancy created via the M-vK mechanism. These findings provide a new strategy for designing high performance heterogeneous catalysts.

Synchronous Reduction-Oxidation Process for Efficient Removal of Trichloroacetic Acid: H* Initiates Dechlorination and ·OH Is Responsible for Removal Efficiency

Degradation of chlorinated disinfection by-products using the electroreduction process has been considered as a promising approach for advanced water treatment, while the removal efficiency is restricted by a high barrier for dechlorination of intermediates only by reductive atomic hydrogen (H*) and excessive cost required for reducing atmosphere. In this paper, we predict that the dechlorination efficiency for trichloroacetic acid (TCA), a typical chlorinated disinfection by-product, can be accelerated via a synchronous reduction-oxidation process, where the dechlorination barrier can be lowered by the oxidation reactions toward the critical intermediates using hydroxyl radicals (·OH). Based on scientific findings, we constructed a synchronous reduction-oxidation platform using a Pd-loaded Cu/Cu₂O/CuO array as the core component. According to the combined results of theoretical and experimental analyses, we found that the high dispersion of nano-sized Pd on a photocathode was beneficial for the production of a high concentration of H* at low overpotential, a perquisite for initiating the dechlorination reaction. Simultaneously, excess H* has the potential to convert O₂ to H₂O₂ in ambient conditions (air condition), and H₂O₂ can be further activated by a Cu-containing substrate to ·OH for attacking the critical intermediates. In this system, ∼89.1% of TCA was completely dechlorinated and ∼26.8% mineralization was achieved in 60 min, which was in contrast to the value of ∼65.7% and mineralization efficiency of only ∼1.7% achieved through the reduction process (Ar condition).

Mesoporous Cu-Ce-Ox Solid Solutions from Spray Pyrolysis for Superior Low-Temperature CO Oxidation

Development of Pt group metal-free catalysts for low-temperature CO oxidation remains critical. In this work, active and stable mesoporous Cu-Ce-O_x solid solutions are prepared by using spray pyrolysis. The specific surface areas and pore volumes reach as high as 170 m²  g^-1 and 0.24 cm³  g^-1 , respectively. The results of CO oxidation study suggest that (1) the catalyst obtained by spray pyrolysis possesses much higher activity than those made by co-precipitation, sol-gel, and hydrothermal methods; (2) the optimal Cu_0.2 -Ce_0.8 -O_x solid solution presents a reactivity over 28 times that of both single-component CuO and CeO₂ at 70 °C. Based on the study of pure-phase Cu-Ce-O_x solid solutions by selective leaching of segregated CuO_x species, the active center for CO oxidation is confirmed as the bimetallic Cu-Ce-O site, whereas the individual CuO_x particles not only act as spectators but also block the active Cu-Ce-O sites. A low apparent activation energy of approximately 48 kJ mol^-1 is detected for CO oxidation at the Cu-Ce-O site, making Cu-Ce-O_x solid solutions able to present high activity at low temperature. Furthermore, the Cu-Ce-O_x catalysts exhibit excellent stability and thermal tolerance toward CO oxidation.

High-index faceted metal oxide micro-/nanostructures: a review on their characterization, synthesis and applications

Exposed high-index facets with a high density of low-coordinated atoms (including edges, steps and kinks) can provide more high-active sites for chemical reactions. Therefore, great progress has made in the facet-dependent application of various high-index faceted micro-/nanostructures in the past decades. Previous review papers have mainly highlighted the advances in high-index faceted noble metal nanocrystals. However, to date, there is no specialized review paper on high-index faceted metal oxides and their facet-dependent applications. Thus, in this review, the existing high-index faceted metal oxide micro-/nanostructures, including Cu2O, TiO2, Fe2O3, ZnO, SnO2 and BiVO4, are reviewed based on their characterization, synthesis engineering and facet-dependent applications in the fields of catalysis, sensors, lithium-ion batteries and carbon monoxide oxidation. Also, several challenges and perspectives are presented. Hopefully, this review article will be a useful guideline and resource for researchers currently concentrating on high-index faceted metal oxides to design and synthesize novel micro-/nanostructures for overcoming the practical environment-, biology- and energy-related problems.

Morphology-Engineered Highly Active and Stable Ru/TiO2 Catalysts for Selective CO Methanation

Ru/TiO₂ catalysts exhibit an exceptionally high activity in the selective methanation of CO in CO₂ - and H₂ -rich reformates, but suffer from continuous deactivation during reaction. This limitation can be overcome through the fabrication of highly active and non-deactivating Ru/TiO₂ catalysts by engineering the morphology of the TiO₂ support. Using anatase TiO₂ nanocrystals with mainly {001}, {100}, or {101} facets exposed, we show that after an initial activation period Ru/TiO₂ -{100} and Ru/TiO₂ -{101} are very stable, while Ru/TiO₂ -{001} deactivates continuously. Employing different operando/in situ spectroscopies and ex situ characterizations, we show that differences in the catalytic stability are related to differences in the metal-support interactions (MSIs). The stronger MSIs on the defect-rich TiO₂ -{100} and TiO₂ -{101} supports stabilize flat Ru nanoparticles, while on TiO₂ -{001} hemispherical particles develop. The former MSIs also lead to electronic modifications of Ru surface atoms, reflected by the stronger bonding of adsorbed CO on those catalysts than on Ru/TiO₂ -{001}.

Pentacoordinated Al3+ -Stabilized Active Pd Structures on Al2 O3 -Coated Palladium Catalysts for Methane Combustion

Supported Pd catalysts are active in catalyzing the highly exothermic methane combustion reaction but tend to be deactivated owing to local hyperthermal environments. Herein we report an effective approach to stabilize Pd/SiO₂ catalysts with porous Al₂ O₃ overlayers coated by atomic layer deposition (ALD). ²⁷ Al magic angle spinning NMR analysis showed that Al₂ O₃ overlayers on Pd particles coated by the ALD method are rich in pentacoordinated Al³⁺ sites capable of strongly interacting with adjacent surface PdO_x phases on supported Pd particles. Consequently, Al₂ O₃ -decorated Pd/SiO₂ catalysts exhibit active and stable PdO_x and Pd-PdO_x structures to efficiently catalyze methane combustion between 200 and 850 °C. These results reveal the unique structural characteristics of Al₂ O₃ overlayers on metal surfaces coated by the ALD method and provide a practical strategy to explore stable and efficient supported Pd catalysts for methane combustion.