Photoinduced Reversible Solid-to-Liquid Transitions for Photoswitchable Materials

Ordered Photoexfoliation for Polypseudorotaxane Nanosheets

Two-dimensional layered structural materials exhibit a wide range of properties due to their ultrahigh specific surface area. However, achieving ordered exfoliation to obtain uniform two-dimensional structures remains challenging. In this study, we developed a supramolecular system by covalently bonding hexathiobenzene (HB) into β-cyclodextrin to create a light-responsive moiety, followed by coassembly with bipyridine and nickel ions to form a polypseudorotaxane (PR) system, which enables an in situ light-induced exfoliation strategy for two-dimensional materials. By further introducing an appropriate ratio of ethanol and applying in situ light irradiation, the gradual evaporation of the solvent ultimately led to the uniform formation of bilayer PR two-dimensional materials. This strategy provides a novel and effective approach for the preparation of two-dimensional layered structural materials from the light perspective.

Salts of trans-3-Styryl Pyridine: The Effect of N-Quaternization on Solid-State Photoreactivity, and Photochemical Crystal Melting

Investigating solid-state photoreactivity, driven by crystal packing, has been a major enduring research theme in Crystal Engineering. Trans-3-styryl pyridine (3-StPy), an unsymmetric olefin, is photo-stable. However, when converted to a series of salts, they exhibited solid-state photoreactivity under UV irradiation. Crystal structures of 3-StPy, its protonated salts, namely, (3-StPyH)(HSO4) ⋅ H2O (1), (3-StPyH)(CF3CO2) (2), and (3-StPyH)(p-Tol-SO3) (3), and methylated salt (3-StPyMe)I (4) were determined by X-ray diffraction. 3-StPy molecules were found not to align in the parallel arrangement required to undergo solid-state [2+2] photocycloaddition reaction; however, upon protonation and methylation, the unsymmetric 3-StPyH+ and [3-StPyMe]+ cations aligned in a head-to-tail parallel arrangement, predominantly governed by the cation⋅⋅⋅π interactions. Various structural features, e. g., the patterns of hydrogen bonding, etc. have been addressed, and established by Hirshfeld surface analysis. The salt with p-tolyl sulfonate anion (3) with Z'>1 represents a rare crystal class. It was also noted that the crystals of 1 and 2 melted into a liquid state upon photodimerization reaction. UV-vis absorption and fluorescence properties have been explored. The electronic structures of 3-StPy, 3-StPyH+, [3-StPyMe]+, and the dimer [3,3'-MPyPhCB]2+ cations have been elucidated by DFT calculations, and the effect of N-quaternization on crystal structures and photophysical properties has been discussed.

Main-chain stiff-stilbene photoswitches in solution, in bulk, and at surfaces

Molecular photoswitches have been incorporated into polymer backbones to control the macromolecular conformations by structural changes of the main-chain photoswitches. However, previous photoswitches installed in the main chains are thermolabile, which precludes deep understanding, precise regulation, and practical applications of the macromolecular conformational changes. Herein, we focus on sterically hindered stiff stilbene (HSS), an emerging photoswitch offering large structural changes in isomerization between the thermally bistable E and Z isomers, and disclose the chemistry of main-chain HSS photoswitches in solution, in bulk, and at thin film surfaces. We synthesize and investigate three types of linear polymers with different chemical linkages between HSS repeating units, polyurethane, polyester, and polyene. The polymer conformations in solution, i.e., hydrodynamic volume, are reversibly photocontrollable in a precise manner by the E/Z ratio. Furthermore, the nanoscopic conformational transformations are amplified to macroscopic photoswitching of the solution transmittance and the surface wettability synergistically with changes between interchain and intrachain hydrogen bonding in the polyurethanes. Additionally, the Z-to-E photoisomerization yields in the glassy state are above 70%, comparable to those in solution, and extraordinarily high despite the restricted molecular mobility. The findings of this study will pave the way for practical and unconventional applications of smart polymer systems based on photoswitches.

Recent Progress of Photoswitchable Fluorescent Diarylethenes for Bioimaging

Photochromic diarylethene has attracted broad research interest in optical applications owing to its excellent fatigue resistance and unique bistability. Photoswitchable fluorescent diarylethene become a powerful molecular tool for fluorescence imaging recently. Herein, the recent progress on photoswitchable fluorescent diarylethenes in bioimaging is reviewed. We summarize the structures and properties of diarylethene fluorescence probes and emphatically introduce their applications in bioimaging as well as super-resolution imaging. Additionally, we highlight the current challenges in practical applications and provide the prospects of the future development directions of photoswitchable fluorescent diarylethene in the field of bioimaging. This comprehensive review aims to stimulate further research into higher-performance photoswitchable fluorescent molecules and advance their progress in biological application.

Functional Semi-Interpenetrating Polymer Networks

Semi-interpenetrating polymer networks (SIPNs) have garnered significant interest due to their potential applications in self-healing materials, drug delivery systems, electrolytes, functional membranes, smart gels and, toughing. SIPNs combine the characteristics of physical cross-linking with advantageous chemical properties, offering broad application prospects in materials science and engineering. This perspective introduces the history of semi-interpenetrating polymer networks and their diverse applications. Additionally, the ongoing challenges associated with traditional semi-interpenetrating polymer materials are discussed and provide an outlook on future advancements in novel functional SIPNs.

An Innovative Azobenzene-Based Photothermal Fabric with Excellent Heat Release Performance for Wearable Thermal Management Device

Azobenzene (azo)-based photothermal energy storage systems have garnered great interest for their potential in solar energy conversion and storage but suffer from limitations including rely on solvents and specific wavelengths for charging process, short storage lifetime, low heat release temperature during discharging, strong rigidity and poor wearability. To address these issues, an azo-based fabric composed of tetra-ortho-fluorinated photo-liquefiable azobenzene monomer and polyacrylonitrile fabric template is fabricated using electrospinning. This fabric excels in efficient photo-charging (green light) and discharging (blue light) under visible light range, solvent-free operation, long-term energy storage (706 days), and good capacity of releasing high-temperature heat (80-95 °C) at room temperature and cold environments. In addition, the fabric maintains high flexibility without evident loss of energy-storage performance upon 1500 bending cycles, 18-h washing or 6-h soaking. The generated heat from charged fabric is facilitated by the Z-to-E isomerization energy, phase transition latent heat, and the photothermal effect of 420 nm light irradiation. Meanwhile, the temperature of heat release can be personalized for thermal management by adjusting the light intensity. It is applicable for room-temperature thermal therapy and can provide heat to the body in cold environments, that presenting a promising candidate for wearable personal thermal management.

Study on Thermophysical Properties and Phase Change Regulation Mechanism of Optically-Controlled Phase Change Materials: Synthesis, Crystal Structure and Molecular Dynamics

Optically-controlled phase change materials, which are prepared by introducing molecular photoswitches into traditional phase change materials (PCMs), can convert and store solar energy into photochemical enthalpy and phase change enthalpy. However, the thermophysical properties of optically controlled PCMs, which are crucial in the practical, are rarely paid attention to. 4-(phenyldiazenyl)phenyl decanoate (Azo-A-10) is experimentally prepared as an optically-controlled PCMs, whose energy storage density is 210.0 kJ·kg-1, and the trans single crystal structure is obtained. The density, phase transition temperature, thermal conductivity, and other parameters in trans state are measured experimentally. Furthermore, a microscopic model of Azo-A-10 is established, and the thermophysical properties are analyzed based on molecular dynamics. The results show that the microstructure parameter (order parameters) and thermophysical properties (density, radial distribution function, self-diffusion coefficient, phase change temperature, and thermal conductivity) of partially or completely isomerized Azo-A-10, which are challenging to observe in experiments, can be predicted by molecular dynamics simulation. The optically-controlled phase change mechanism can be clarified according to the differences in microstructure. The optically-controlled switchability of thermophysical properties of an optically-controlled PCM is analyzed. This study provides ideas for the improvement, development, and application of optically-controlled PCMs in the future.

Photoswitchable Azobispyrazole Crystals Achieving Near-Quantitative Crystalline-State Bidirectional E ⇆ Z Conversions

Azo molecules, being extensively studied as photoswitches, have demonstrated versatile photoswitching performance and applications in solution-phase systems. However, the dense molecular packing and insufficient conformational freedom in the solid/crystalline state typically pose a challenge to their E ⇆ Z isomerization. This study presents a breakthrough in solid-state azo chemistry, where the investigated azobispyrazole molecules are capable of achieving high E → Z photoconversion, ranging from 85% to nearly quantitative (96%), and quantitative Z → E photoswitching in their crystalline states. To the best of our knowledge, azobispyrazoles are the first photoswitchable azo crystals that achieve high-yield bidirectional conversions, particularly the challenging thermodynamically stable-to-metastable E → Z transformation. Crystallographic and computational analyses provide in-depth insights into the photoswitching mechanism and propose that locally distributed free spaces and weak intermolecular interactions within the crystal structures are key factors contributing to the crystalline-state conversion. This work opens up new avenues for the development of promising photoswitchable azo crystals and also underscores the potential application of azobispyrazole crystals as light-responsive materials.

Closed-Loop Recyclable and Totally Renewable Liquid Crystal Networks with Room-Temperature Programmability and Reconfigurable Functionalities

Dynamic covalent liquid crystal networks (DCv-LCNs) with straightforward (re)programmability, reprocessability, and recyclability facilitates the manufacture of sophisticated LCN actuators and intelligent robots. However, the DCv-LCNs are still limited to heat-assisted programming and polymer-to-polymer reprocessing/recycling, which inevitably lead to deterioration of the LCN structures and the actuation performances after repeated programming/processing treatments, owing to the thermal degradation of the polymer network and/or external agent interference. Here, a totally renewable azobenzene-based DCv-LCN with room-temperature programmability and polymer-to-monomers chemical recyclability is reported, which was synthesized by crosslinking the azobenzene-containing dibenzaldehyde monomer and the triamine monomer via the dynamic and dissociable imine bonds. Thanks to the water-activated dynamics of the imine bonds, the resultant DCv-LCN can be simply programmed, upon water-soaking at room temperature, to yield a UV/Vis light-driven actuator. Importantly, the reported DCv-LCN undergoes depolymerization in an acid-solvent medium at room temperature because of the acid-catalyzed hydrolysis of the imine bonds, giving rise to easy separation and recovery of both monomers in high purity, even with tolerance to additives. The recovered pure monomers can be used to regenerate totally new DCv-LCNs and actuators, and their functionalities can be reconfigured by removing old and introducing new additives, by implementing the closed-loop polymer-monomers-polymer recycling.

Strategies to control humidity sensitivity of azobenzene isomerisation kinetics in polymer thin films

Azobenzenes are versatile photoswitches that garner interest in applications ranging from photobiology to energy storage. Despite their great potential, transforming azobenzene-based discoveries and proof-of-concept demonstrations from the lab to the market is highly challenging. Herein we give an overview of a journey that started from a discovery of hydroxyazobenzene's humidity sensitive isomerisation kinetics, developed into commercialization efforts of azobenzene-containing thin film sensors for optical monitoring of the relative humidity of air, and arrives to the present work aiming for better design of such sensors by understanding the different factors affecting the humidity sensitivity. Our concept is based on thermal isomerisation kinetics of tautomerizable azobenzenes in polymer matrices which, using pre-defined calibration curves, can be converted to relative humidity at known temperature. We present a small library of tautomerizable azobenzenes exhibiting humidity sensitive isomerisation kinetics in hygroscopic polymer films. We also investigate how water absorption properties of the polymer used, and the isomerisation kinetics are linked and how the azobenzene content in the thin film affects both properties. Based on our findings we propose simple strategies for further development of azobenzene-based optical humidity sensors.

Emerging solid-state cycloaddition chemistry for molecular solar thermal energy storage

Recently discovered designs of solid-state molecular solar thermal energy storage systems are illustrated, including alkenes, imines, and anthracenes that undergo reversible [2 + 2] and [4 + 4] photocycloadditions for photon energy storage and release. The energy storage densities of various molecular designs, from 6 kJ mol-1 to 146 kJ mol-1 (or up to 318 J g-1), are compared and summarized, along with effective strategies for engineering their crystal packing structures that facilitate solid-state reactions. Many promising molecular scaffolds introduced here highlight the potential for achieving successful solid-state solar energy storage, guiding further discoveries and the development of new molecular systems for applications in solid-state solar thermal batteries.

Photoswitchable Metal-Organic Framework as a Smart Nanoreactor for Ultraviolet Light-Enhanced Confined Catalysis

Confined catalysis, where a chemical reaction is accommodated within a nanoscale host, provides an effective approach to control the pathways and outcomes of catalytic transformations. However, the confinement effect is typically limited to a fixed rate and/or selectivity once the nanohost is chosen. Herein, we developed a photoresponsive metal-organic framework (MOF) as a "smart" nanohost to realize ultraviolet (UV) light-enhanced confined catalysis of Knoevenagel condensation. Photoresponsive MOF of Zn-ADA was thus prepared by solvothermal strategy where azobenzene-4,4'-dicarboxylic acid (ADA) was used as the photoactive linker to coordinate with zinc nitrate. Characterization results suggested that UV light could decrease the pore size of Zn-ADA due to suppressed bending of the azobenzene-containing ADA linker in Zn-ADA. It enforced the proximity between substrates and catalytic groups within the confined space, and thus enhanced the confinement effect on Knoevenagel condensation. The UV light-enhanced confined catalysis enabled the translation of light stimulus into chemical signal, which may open up new control on the basis of the specific reaction field.

A Tunable Hydrophilic-Hydrophobic, Stimulus Responsive, and Robust Iridescent Structural Color Bionic Film with Chiral Photonic Crystal Nanointerface

Bio-inspired in nature, using nanomaterials to fabricate the vivid bionic structural color and intelligent stimulus responsive interface as smart skin or optical devices are widely concerned and remain a huge challenge. Here, the bionic flexible film is designed and fabricated with chiral nanointerface and tunable hydrophilic-hydrophobic by the ultrasonic energy perturbation strategy and crosslinking of the cellulose nanocrystals (CNC). An intelligent nanointerface with adjustable hydrophilic and hydrophobic properties is constructed by the supramolecular assembly using a smart ionic liquid molecule. The bionic flexible film possessed the variable hydrophilic-hydrophobic, stimulus responsive, and robust iridescent structural color. The reflective wavelength and the helical pitch of the film can be easily modulated through the ultrasonic energy perturbation strategy. The bionic flexible film by covalent cross-linking has excellent robustness, good elasticity and flexibility. The tunable brilliant structural color of the chiral nanointerface is attributed to the surface charge change of the CNC photonic crystal, which is disturbed by ultrasonic energy perturbation. The bionic flexible film with tunable structure color has intelligent hydrophilic and hydrophobic stimulus response properties. The chiral bionic materials have potential applications in smart skin, optical devices, bionic materials, robots, anti-counterfeiting, colorful displays, and stealth materials.

Photocontrolled Reversible Solid-Fluid Transitions of Azopolymer Nanocomposites for Intelligent Nanomaterials

Intelligent polymer nanocomposites are multicomponent and multifunctional materials that show immense potential across diverse applications. However, to exhibit intelligent traits such as adaptability, reconfigurability and dynamic properties, these materials often require a solvent or heating environment to facilitate the mobility of polymer chains and nanoparticles, rendering their applications in everyday settings impractical. Here intelligent azopolymer nanocomposites that function effectively in a solvent-free, room-temperature environment based on photocontrolled reversible solid-fluid transitions via switching flow temperatures (Tfs) are shown. A range of nanocomposites is synthesized through the grafting of Au nanoparticles, Au nanorods, quantum dots, or superparamagnetic nanoparticles with photoresponsive azopolymers. Leveraging the reversible cis-trans photoisomerization of azo groups, the azopolymer nanocomposites transition between solid (Tf above room temperature) and fluid (Tf below room temperature) states. Such photocontrolled reversible solid-fluid transitions empower the rewriting of nanopatterns, correction of nanoscale defects, reconfiguration of complex multiscale structures, and design of intelligent optical devices. These findings highlight Tf-switchable polymer nanocomposites as promising candidates for the development of intelligent nanomaterials operative in solvent-free, room-temperature conditions.

A Host-Guest Approach to Engineering Oxidase-Mimetic Assembly with Substrate Selectivity and Dynamic Catalysis

The creation of synthetic materials that emulate the complexity of natural systems, such as enzymes, remains a challenge in biomimicry. Here, we present a simple yet effective strategy to introduce substrate selectivity and dynamic responsiveness into an enzyme-mimetic supramolecular material. We achieved this by anchoring γ-cyclodextrin to a fluorene-modified Lys/Cu2+ assembly, which mimics copper-dependent oxidase. The binding affinity among the components was examined using 1H NMR, isothermal titration calorimetry (ITC), and theoretical simulation. The γ-cyclodextrin acts as a host, forming a complex with the fluorenyl moiety and aromatic substrates of specific sizes. This ensures the proximity of the substrate reactive groups to the copper center, leading to size-selective enhancement of aromatic substrate oxidation, particularly favoring biphenyl substrates. Notably, α- and β-cyclodextrins do not exhibit this effect, and the native oxidase lacks this selectivity. Additionally, the binding affinity of the aromatic substrate to the catalyst can be dynamically tuned by adding α-cyclodextrin or by irradiating with different wavelengths in the presence of competitive azo-guests, resulting in switched oxidative activities. This approach offers a new avenue for designing biomimetic materials with tailorable active site structures and catalytic properties.

Bis-azopyrazole Photoswitches for Efficient Solar Light Harvesting

Although natural sunlight is one of the most abundant and sustainable energy resources, only a fraction of its energy is currently harnessed and utilized in photoactive systems. The development of molecular photoswitches that can be directly activated by sunlight is imperative for unlocking the full potential of solar energy and addressing the growing energy demands. Herein, we designed a series of 2-amino-1,3-bis-azopyrazoles featuring a coupled πn system, resulting in a pronounced redshift in their spectral absorption, reaching up to 661 nm in the red region. By varying the amino substituents of these molecules, highly efficient E→Z photoisomerization under unfiltered sunlight can be achieved, with yields of up to 88.4 %. Moreover, the Z,Z-isomers have high thermal stability with half-lives from days to years at room temperature. The introduction of ortho-amino substitutions and meta-bisazo units leads to a reversal of the n-π* and πn-π* transitions on the energy scale. This change provides a new perspective for further tuning the visible absorption of azo-switches by utilizing the πn-π* band instead of the conventional n-π* band. These results suggest that photoresponsive systems can be powered by sunlight instead of traditional artificial lights, thereby paving the way for sustainable smart materials and devices.

Visible-Light-Activated Heteroaryl Azoswitches: Toward a More Colorful Future

Azobenzenes (Ph-N═N-Ph) are known as the most widely studied molecular photoswitches, and the recent rise of azoheteroarenes (Het-N═N-Ph or Het-N═N-Het) offers great opportunities to advance this already mature field. A common limitation is that azo-switches generally require harmful UV light for activation, which hinders their application across various fields. Despite great efforts in developing visible-light azobenzenes over the past few decades, the potential of visible-light heteroaryl azoswitches remains largely unexplored. This Perspective summarizes the state-of-the-art advancements in visible-light heteroaryl azoswitches, covering molecular design strategies, the structure-property relationship, and potential applications. We highlight the distinctive advantages of azoheteroarenes over azobenzenes in the research and development of visible-light switches. Furthermore, we discuss the opportunities and challenges in this emerging field and propose potential solutions to address crucial issues such as spectral red-shift and thermal half-life. Through this Perspective paper, we aim to provide inspiration for further exploration in this field, in anticipation of the growing prosperity and bright future of visible-light azoheteroarene photoswitches.

Photo-Responsive Hydrogen-Bonded Molecular Networks Capable of Retaining Crystalline Periodicity after Isomerization

The molecular conformation, crystalline morphology, and properties of photochromic organic crystals can be controlled through photoirradiation, making them promising candidates for functional organic materials. However, photochromic porous molecular crystals with a networked framework structure are rare due to the difficulty in maintaining space that allows for photo-induced molecular motion in the crystalline state. This study describes a photo-responsive single crystal based on hydrogen-bonded (H-bonded) network of dihydrodimethylbenzo[e]pyrene derivative 4BDHP. A crystal composed of H-bonded undulate layers, 4BDHP-2, underwent photo-isomerization in the crystalline state due to loose stacking of the layers. Particularly, enantio-pure crystal (S,S)-4BDHP-2 allowed to reveal the structure of the photoisomerized crystal, in which the closed form (4BDHP) and open form (4CPD) were arranged alternately with keeping crystalline periodicity, although side reactions were also implied. The present proof-of-concept system of a photochromic framework that retains crystalline periodicity after photo-isomerization may provide new light-driven porous functional materials.

Semi-crystalline polymers with supramolecular synergistic interactions: from mechanical toughening to dynamic smart materials

Semi-crystalline polymers (SCPs) with anisotropic amorphous and crystalline domains as the basic skeleton are ubiquitous from natural products to synthetic polymers. The combination of chemically incompatible hard and soft phases contributes to unique thermal and mechanical properties. The further introduction of supramolecular interactions as noncovalently interacting crystal phases and soft dynamic crosslinking sites can synergize with covalent polymer chains, thereby enabling effective energy dissipation and dynamic rearrangement in hierarchical superstructures. Therefore, this review will focus on the design principles of SCPs by discussing supramolecular construction strategies and state-of-the-art functional applications from mechanical toughening to sophisticated functions such as dynamic adaptivity, shape memory, ion transport, etc. Current challenges and further opportunities are discussed to provide an overview of possible future directions and potential material applications.

Photo-Healable Fabrics: Achieving Structural Control via Photochemical Solid-Liquid Transitions of Polystyrene/Azobenzene-Containing Polymer Blends

While polymer fabrics are integral to a wide range of applications, their vulnerability to mechanical damage limits their sustainability and practicality. Addressing this challenge, our study introduces a versatile strategy to develop photohealable fabrics, utilizing a composite of polystyrene (PS) and an azobenzene-containing polymer (PAzo). This combination leverages the structural stability of PS to compensate for the mechanical weaknesses of PAzo, forming the fiber structures. Key to our approach is the reversible trans-cis photoisomerization of azobenzene groups within the PAzo under UV light exposure, enabling controlled morphological alterations in the PS/PAzo blend fibers. The transition of PAzo sections from a solid to a liquid state at a low glass transition temperature (Tg ∼ 13.7 °C) is followed by solidification under visible light, thus stabilizing the altered fiber structures. In this study, we explore various PS/PAzo blend ratios to optimize surface roughness and mechanical properties. Additionally, we demonstrate the capability of these fibers for photoinduced self-healing. When damaged fabrics are clamped and subjected to UV irradiation for 20 min and pressed for 24 h, the mobility of the cis-form PAzo sections facilitates healing while retaining the overall fabric structure. This innovative approach not only addresses the critical issue of durability in polymer fabrics but also offers a sustainable and practical solution, paving the way for its application in smart clothing and advanced fabric-based materials.

Dual-Mode Patterns Enabled by Photofluidization of an Azobenzene-Containing Linear Liquid Crystal Copolymer

Creating dual-mode patterns in the same area of the material is an advanced method to increase the dimension of information storage, improve the level of encryption security, and promote the development of encoding technology. However, in situ, different patterns may lead to serious mutual interference in the process of manufacturing and usage. New materials and patterning techniques are essential for the advancement of noninterfering dual-mode patterns. Herein, noninterfering dual-mode patterns are demonstrated by combining the structural color and chromatic polarization, which is designed with an azobenzene-containing linear liquid crystal copolymer featuring a photofluidization effect. On the one hand, structural color patterns are imprinted via silicon templates with periodic microstructures after a UV-light-induced local transition of the polymer surface from a glassy to rubbery state. On the other hand, different polarization patterns based on the local photoinduced orientation of mesogens are created within the photofluidized region by the Weigert effect. Especially, the secondary imprinting is used to eliminate the partial damage to the structural color patterns during writing of the polarization patterns, thus obtaining dual-mode patterns without interference. This study provides a blueprint for the creation of advanced materials and sophisticated photopatterning techniques with potential cross-industry applications.

Arylazo-3,5-diphenylpyrazole Derivatives: Molecular Probes Exhibiting Reversible Light-induced Phase Transitions for Energy Storage and Direct Photolithographic Patterning

We report azopyrazole photoswitches decorated with variable N-alkyl and alkoxy chains (for hydrophobic interactions) and phenyl substituents on the pyrazoles (enabling π-π stacking), showing efficient bidirectional photoswitching and reversible light-induced phase transition (LIPT). Extensive spectroscopic, microscopic, and diffraction studies and computations confirmed the manifestation of molecular-level interactions and photoisomerization into macroscopic changes leading to the LIPT phenomena. Using differential scanning calorimetric (DSC) studies, the energetics associated with those accompanying processes were estimated. The long half-lives of Z isomers, high energy contents for isomerization and phase transitions, and the stability of phases over an extended temperature range (-60 to 80 °C) make them excellent candidates for energy storage and release applications. Remarkably, the difference in the solubility of the distinct phases in one of the derivatives allowed us to utilize it as a photoresist in photolithography applications on diverse substrates.

Optical deformations of azobenzene polymers: orientation approach vs. other concepts

It has been 30 years since the discovery of surface restructuring in thin azopolymer films by two independent research groups. A wide variety of topographical structures have been created by the application of two-/four-beam interference patterns, space light modulators and even helical beams. There are a number of comprehensive reviews which describe in detail the advances in superficial photopatterning of azopolymer films and macroscopic deformations of azonetworks. The theoretical approaches are only briefly touched on in these reviews and often are accompanied by the remark that the phenomenon is far from being understood. In this review, we would like to present the polymer theoretist's point of view on this intriguing problem. We begin by describing a multitude of theoretical approaches and commenting on the pluses and drawbacks of each. Importantly, we show that in most cases the presence of an azopolymer matrix is either ignored or limited to a specific class of azopolymers (liquid-crystalline or elastomeric). We then move to early orientation approaches based on the hypothesis that reorientation of azo-chromophores by modulated polarized light is the sole cause of superficial patterning. At the end of the review a modern orientation approach, as proposed by our own group, is presented. This approach has high predictive power because it can explain a large pool of experimental data for different classes of azopolymers including glassy and liquid-crystalline materials. This is made possible by taking into account both the light-induced orientation process and the change of anisotropic interactions between the chromophores upon their isomerization. Last but not least, this is the only approach that provides an estimate of the light-induced stress large enough to cause plastic deformations of glassy azopolymers. Recent finite element modeling results show remarkable similarity to real patterns and even time-dependent data are well explained. With this, we claim that the puzzle is finally understood and the orientation approach is ready for its implementation for major azopolymer classes.

Robust Supercooled Liquid Formation Enables All-Optical Switching Between Liquid and Solid Phases of TEMPO

Organic molecules that undergo supercooling can provide the basis for novel stimuli-responsive materials, but the number of such compounds is limited. Results in this paper show that the stable organic radical 2,2,6,6-tetramethyl-1-piperidine-1-oxyl (TEMPO) can form a stable supercooled liquid (SCL). Upon melting and cooling back to room temperature, the TEMPO SCL can persist for months, even after mild physical agitation. Its high vapor pressure can enable crystal growth at remote locations within the sample container over the course of days. Optical, electron paramagnetic resonance, and birefringence measurements show no evidence of new chemical species or partially ordered phases in the supercooled liquid. TEMPO's free radical character permits absorption of visible light that can drive photothermal melting to form the SCL, while a single nanosecond light pulse can initiate recrystallization of the SCL at some later time. This capability enables all-optical switching between the solid and the SCL phases. The physical origin of TEMPO's remarkable stability as an SCL remains an open question, but these results suggest that organic radicals comprise a new class of molecules that can form SCLs with potentially useful properties.

Fully Reversible and Super-Fast Photo-Induced Morphological Transformation of Nanofilms for High-Performance UV Detection and Light-Driven Actuators

Flexible and highly ultraviolet (UV) sensitive materials garner considerable attention in wearable devices, adaptive sensors, and light-driven actuators. Herein, a type of nanofilms with unprecedented fully reversible UV responsiveness are successfully constructed. Building upon this discovery, a new system for ultra-fast, sensitive, and reliable UV detection is developed. The system operates by monitoring the displacement of photoinduced macroscopic motions of the nanofilms based composite membranes. The system exhibits exceptional responsiveness to UV light at 375 nm, achieving remarkable response and recovery times of < 0.3 s. Furthermore, it boasts a wide detection range from 2.85 µW cm-2 to 8.30 mW cm-2, along with robust durability. Qualitative UV sensing is accomplished by observing the shape changes of the composite membranes. Moreover, the composite membrane can serve as sunlight-responsive actuators for artificial flowers and smart switches in practical scenarios. The photo-induced motion is ascribed to the cis-trans isomerization of the acylhydrazone bonds, and the rapid and fully reversible shape transformation is supposed to be a synergistic result of the instability of the cis-isomers acylhydrazone bonds and the rebounding property of the networked nanofilms. These findings present a novel strategy for both quantitative and qualitative UV detection.

Generating Stable Nitrogen Bubble Layers on Poly(methyl methacrylate) Films by Photolysis of 2-Azidoanthracene

2-Azidoanthracene (2N3-AN) can act as a photochemical source of N2 gas when dissolved in an optically transparent polymer such as poly(methyl methacrylate) (PMMA). Irradiation at 365 or 405 nm of a 150 μm-thick polymer film submerged in water causes the rapid appearance of a surface layer of bubbles. The rapid appearance of surface bubbles cannot be explained by normal diffusion of N2 through the polymer and likely results from internal gas pressure buildup during the reaction. For an azide concentration of 0.1 M and a light intensity of 140 mW/cm2, the yield of gas bubbles is calculated to be approximately 40%. The dynamics of bubble growth depend on the surface morphology, light intensity, and 2N3-AN concentration. A combination of nanoscale surface roughness, high azide concentration, and high light intensity is required to attain the threshold N2 gas density necessary for rapid, high-yield bubble formation. The N2 bubbles adhered to the PMMA surface and survived for days under water. The ability to generate stable gas bubbles "on demand" using light permits the demonstration of photoinduced flotation and patterned bubble arrays.

Photoinduced Solid-Liquid Phase Transition and Energy Storage Enabled by the Design of Linked Double Photoswitches

We demonstrate an effective design strategy of photoswitchable phase change materials based on the bis-azobenzene scaffold. These compounds display a solid phase in the E,E state and a liquid phase in the Z,Z state, in contrast to their monoazobenzene counterparts that exhibit less controlled phase transition behaviors that are largely influenced by their functional groups.

Calamitic Liquid Crystals for Reversible Light-Modulated Phase Regulation Based on Arylazopyrazole Photoswitches

The design of responsive liquid crystals enables a diversity of technological applications. Especially photochromic liquid crystals gained a lot of interest in recent years due to the excellent spatiotemporal control of their phase transitions. In this work we present calamitic light responsive mesogens based on a library of arylazopyrazole photoswitches. These compounds show liquid-crystalline behavior as shown by differential scanning calorimetry, grazing incidence X-ray diffraction and polarized optical microscopy. UV-vis spectroscopy and NMR analysis confirmed the excellent photophysical properties in solution and thin film. Additionally, polarized optical microscopy studies of the pristine compounds show reversible phase transition upon irradiation with light. Moreover, as a dopant in the commercially available liquid crystal 4-cyano-4'-pentylbiphenyl (5CB), the temperature range was reduced to ambient temperatures while preserving the photophysical properties. Remarkably, this co-assembled system shows reversible liquid-crystalline to isotropic phase transition upon irradiation with light of different wavelengths. The spatiotemporal control of the phase transition of the liquid crystals offers opportunities in the development of optical devices.

Guard Cell-Inspired Ion Channels: Harnessing the Photomechanical Effect via Supramolecular Assembly of Cross-Linked Azobenzene/Polymers

Stimuli-responsive ion nanochannels have attracted considerable attention in various fields because of their remote controllability of ionic transportation. For photoresponsive ion nanochannels, however, achieving precise regulation of ion conductivity is still challenging, primarily due to the difficulty of programmable structural changes in confined environments. Moreover, the relationship between noncontact photo-stimulation in nanoscale and light-induced ion conductivity has not been well understood. In this work, a versatile design for fabricating guard cell-inspired photoswitchable ion channels is presented by infiltrating azobenzene-cross-linked polymer (AAZO-PDAC) into nanoporous anodic aluminum oxide (AAO) membranes. The azobenzene-cross-linked polymer is formed by azobenzene chromophore (AAZO)-cross-linked poly(diallyldimethylammonium chloride) (PDAC) with electrostatic interactions. Under UV irradiation, the trans-AAZO isomerizes to the cis-AAZO, causing the volume compression of the polymer network, whereas, in darkness, the cis-AAZO reverts to the trans-AAZO, leading to the recovery of the structure. Consequently, the resultant nanopore sizes can be manipulated by the photomechanical effect of the AAZO-PDAC polymers. By adding ionic liquids, the ion conductivity of the light-driven ion nanochannels can be controlled with good repeatability and fast responses (within seconds) in multiple cycles. The ion channels have promising potential in the applications of biomimetic materials, sensors, and biomedical sciences.

Liquid Crystalline Nanoparticles via Polymerization-Induced Self-Assembly: Morphology Evolution and Function Regulation

Liquid crystalline nanoparticles (LC NPs) are a kind of polymer NPs with LC mesogens, which can form special anisotropic morphologies due to the influence of LC ordering. Owing to the stimuli-responsiveness of the LC blocks, LC NPs show abundant morphology evolution behaviors in response to external regulation. LC NPs have great application potential in nano-devices, drug delivery, special fibers and other fields. Polymerization-induced self-assembly (PISA) method can synthesize LC NPs at high solid content, reducing the harsh demand for reaction solvent of the LC polymers, being a better choice for large-scale production. In this review, we introduced recent research progress of PISA-LC NPs by dividing them into several parts according to the LC mesogen, and discussed the improvement of experimental conditions and the potential application of these polymers.

The influence of molecular shape on glass-forming behavior in a minimalist trimer model

In this study, we employed molecular dynamics simulations to probe the influence of molecular morphological changes on the dynamic behavior of a model consisting of trimer molecules. This model, comprising a chain of three particles, facilitates the exploration of variations in the internal angle between these particles. Our findings highlight the significant impact of molecular conformation: systems with more linear conformations, characterized by larger internal angles, exhibit relaxation times several orders of magnitude greater than their counterparts with smaller internal angles. Furthermore, we delve into the role of angular interaction rigidity, uncovering a pronounced deceleration in dynamics and an increase in dynamic heterogeneity as rigidity escalates. This model not only provides insights into azobenzene-type systems but also sets the stage for subsequent research into the microscopic nuances of related systems, with potential extensions to composite systems.

Arylazopyrazole as a photo-switch for controllable self-assembly of pillar[6]arene-based supramolecular amphiphiles

A photo-responsive host-guest molecular recognition between a cationic pillar[6]arene host and an arylazopyrazole derived guest was established. Based on this novel recognition motif, a photo-controllable supra-amphiphile was constructed. The spontaneous aggregation can be reversibly controlled by irradiation with UV (365 nm) and green light (520 nm), leading to a switch between spherical nanoparticles and vesicle-like aggregates.

Visible light-responsive materials: the (photo)chemistry and applications of donor-acceptor Stenhouse adducts in polymer science

Donor-acceptor Stenhouse adduct (DASA) photoswitches have gained a lot of attention since their discovery in 2014. Their negative photochromism, visible light absorbance, synthetic tunability, and the large property changes between their photoisomers make them attractive candidates over other commonly used photoswitches for use in materials with responsive or adaptive properties. The development of such materials and their translation into advanced technologies continues to widely impact forefront materials research, and DASAs have thus attracted considerable interest in the field of visible-light responsive molecular switches and dynamic materials. Despite this interest, there have been challenges in understanding their complex behavior in the context of both small molecule studies and materials. Moreover, incorporation of DASAs into polymers can be challenging due to their incompatibility with the conditions for most common polymerization techniques. In this review, therefore, we examine and critically discuss the recent developments and challenges in the field of DASA-containing polymers, aiming at providing a better understanding of the interplay between the properties of both constituents (matrix and photoswitch). The first part summarizes current understanding of DASA design and switching properties. The second section discusses strategies of incorporation of DASAs into polymers, properties of DASA-containing materials, and methods for studying switching of DASAs in materials. We also discuss emerging applications for DASA photoswitches in polymeric materials, ranging from light-responsive drug delivery systems, to photothermal actuators, sensors and photoswitchable surfaces. Last, we summarize the current challenges in the field and venture on the steps required to explore novel systems and expand both the functional properties and the application opportunities of DASA-containing polymers.

Azopolyesters with Intrinsic Crystallinity and Photoswitchable Reversible Solid-to-Liquid Transitions

Herein, we introduce a variety of azopolyesters (azobenzene-based polyesters) with remarkable intrinsic crystallinity and photoinduced reversible solid-to-liquid transition abilities from copolymerization of azobenzene-based epoxides with cyclic anhydrides. The length of the soft alkyl side-chain inlaid with azobenzenes and stereoregularity of main-chain of azopolymers have tremendous effects on crystallization properties of the resulting polyesters with melting temperature (Tm ) in the range of 51-251 °C. Moreover, some of azopolyesters possess excellently photoinduced reversible solid-to-liquid transition performance thanks to trans-cis photoisomerization of azobenzenes. Trans-azopolyesters are yellow solids with Tm s or glass transition temperatures (Tg s) above room temperature, whereas cis-polymers are red liquids with Tg s below -20 °C. These azopolyesters could be applied as novel light-switchable adhesives for quartz/quartz, wood/wood and quartz/wood adhesion, with the strength in the range of 0.73-0.89 MPa for trans-polymers. Conversely, the adhesion strength of liquefied cis-azopolyesters generated from the irradiation of trans-polymers by UV light was about 0.1 MPa, which shows light enable to control the adhesion process with high spatiotemporal resolution.

Photoswitchable Azoheteroarene-Based Chelating Ligands: Light Modulation of Properties, Aqueous Solubility and Catalysis

We report the design and synthesis of eight photoswitchable phenylazopyridine- and phenylazopyrazole-based molecular systems as chelation-type light-controllable ligands. Besides the studies on fundamental photoisomerization behaviour, the ligands were also screened for light-tuneable properties such as photochromism, phase transition, and solubility, especially in the aqueous medium. This investigation demonstrates how the modulation of aqueous solubility can be achieved through photoisomerization and can further be utilized towards controlling the amount of catalytically active Cu(I) species in the aqueous conditions. Through this approach, light control over the catalytic activity was achieved for Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reactions, along with a partial recovery of the catalytically active species.

Solar Efficiency of Azo-Photoswitches for Energy Conversion: A Comprehensive Assessment

Photoswitches can absorb solar photons and store them as chemical energy by photoisomerization, which is regarded as a promising strategy for photochemical solar energy storage. Although many efforts have been devoted to photoswitch discovery, the solar efficiency, a critical fundamental parameter assessing the solar energy conversion ability, has attracted little attention and remains to be studied comprehensively. Here we provide a systematic evaluation of the solar efficiency of typical azo-switches including azobenzenes and azopyrazoles, and gain a comprehensive understanding on its decisive factors. All the efficiencies are found below 1.0 %, far from the proposed limits for molecular solar thermal energy storage systems. Azopyrazoles exhibit remarkably higher solar efficiencies (0.59-0.94 %) than azobenzenes (0.11-0.43 %), benefiting from largely improved quantum yield and photoisomerization yield. Light filters can be used to improve the isomerization yield but inevitably narrow the usable range of solar spectrum, and these two contradictory effects ultimately reduce solar efficiencies. We envision this conflict could be resolved through developing azo-switches that afford high isomerization yields by absorbing wide-spectrum solar energy. We hope this work could promote more efforts to improve the solar efficiency of photoswitches, which is highly relevant to the prospect for future applications.

Photoinduced Crystal-to-Liquid Transition of Acylhydrazone-Based Photoswitching Molecules

A photoinduced crystal-to-liquid transition (PCLT) behavior of new acylhydrazone derivatives (NCs) is reported. The photoswitching of the NCs was identified as a negative photochromism with a high E-to-Z conversion yield (>98%). A kinetic analysis shows a half-life of almost one month. Owing to these high photoswitching performances, we successfully isolated both E- and Z-forms, evaluated their crystal structures, and observed distinct thermal behaviors. The Z-form melts at a lower temperature than the E-form by several tens of degrees. The PCLT occurs at even lower temperatures. UV irradiation induces the E-to-Z conversion in the crystalline state, thereby inducing a eutectic melting. In addition to the PCLT, we observed a photomechanical behavior of the crystals, which suggests that the presented acylhydrazones can be new members of the photoresponsive crystalline materials.

A Photopatternable Conjugated Polymer with Thermal-Annealing-Promoted Interchain Stacking for Highly Stable Anti-Counterfeiting Materials

Photoresponsive polymers can be conveniently used to fabricate anti-counterfeiting materials through photopatterning. However, an unsolved problem is that ambient light and heat can damage anti-counterfeiting patterns on photoresponsive polymers. Herein, photo- and thermostable anti-counterfeiting materials are developed by photopatterning and thermal annealing of a photoresponsive conjugated polymer (MC-Azo). MC-Azo contains alternating azobenzene and fluorene units in the polymer backbone. To prepare an anti-counterfeiting material, an MC-Azo film is irradiated with polarized blue light through a photomask, and then thermally annealed under the pressure of a photonic stamp. This strategy generates a highly secure anti-counterfeiting material with dual patterns, which is stable to sunlight and heat over 200 °C. A key for the stability is that thermal annealing promotes interchain stacking, which converts photoresponsive MC-Azo to a photostable material. Another key for the stability is that the conjugated structure endows MC-Azo with desirable thermal properties. This study shows that the design of photopatternable conjugated polymers with thermal-annealing-promoted interchain stacking provides a new strategy for the development of highly stable and secure anti-counterfeiting materials.

Light, pH, and Temperature Triple-Responsive Magnetic Composites for Highly Efficient Phosphopeptide Enrichment

Smart materials can dynamically and reversibly change their structures and functions in response to external stimuli. In this study, we designed a smart magnetic composite (MNP-pSPA-b-pNIPAm) with a triple response to ultraviolet (UV) light, pH, and temperature. Relying on the response of spiropyranyl acrylate (SPA) and N-isopropylacrylamide (NIPAm) to external stimuli (light, pH, and temperature), MNP-pSPA-b-pNIPAm was used for the controlled capture and release of phosphopeptides. The established phosphopeptide enrichment platform exhibits high sensitivity (detection limit of 0.04 fmol), high selectivity (BSA/β-casein, 1000:1), and good reusability (6 cycles). In addition, the method was also applied to the enrichment of phosphopeptides in real samples (skim milk, human saliva, and serum), demonstrating the feasibility of this method for phosphoproteomic analysis. After enriching from human nonsmall cell lung cancer cell (A549) lysates with MNP-pSPA-b-pNIPAm, 2595 phosphopeptides corresponding to 2281 phosphoproteins were identified. The novel responsive enrichment probe is highly specific for phosphoproteomic analysis and provides an effective method for studying the significance of protein phosphorylation in complex biological samples.

Photoinduced crystal melting with luminescence evolution based on conformational isomerisation

The phenomenon of crystal melting by light irradiation, known as photo-induced crystal-to-liquid transition (PCLT), can dramatically change material properties with high spatiotemporal resolution. However, the diversity of compounds exhibiting PCLT is severely limited, which hampers further functionalisation of PCLT-active materials and the fundamental understandings of PCLT. Here, we report on heteroaromatic 1,2-diketones as the new class of PCLT-active compounds, whose PCLT is based on conformational isomerisation. In particular, one of the diketones demonstrates luminescence evolution prior to crystal melting. Thus, the diketone crystal exhibits dynamic multistep changes in the luminescence colour and intensity during continuous ultraviolet irradiation. This luminescence evolution can be ascribed to the sequential PCLT processes of crystal loosening and conformational isomerisation before macroscopic melting. Single-crystal X-ray structural analysis, thermal analysis, and theoretical calculations of two PCLT-active and one inactive diketones revealed weaker intermolecular interactions for the PCLT-active crystals. In particular, we observed a characteristic packing motif for the PCLT-active crystals, consisting of an ordered layer of diketone core and a disordered layer of triisopropylsilyl moieties. Our results demonstrate the integration of photofunction with PCLT, provide fundamental insights into the melting process of molecular crystals, and will diversify the molecular design of PCLT-active materials beyond classical photochromic scaffolds such as azobenzenes.

Photoresponsive Diarylethene-Containing Polymers: Recent Advances and Future Challenges

Photoresponsive polymers have attracted increasing interest owing to their potential applications in anticounterfeiting, information encryption, adhesives, etc. Among them, diarylethene (DAE)-containing polymers are one of the most promising photoresponsive polymers and have unique thermal stability and fatigue resistance compared to azobenzene- and spiropyran-containing polymers. Herein, the design of DAE-containing polymers based on different types of structures, including main chain polymers, side-chain polymers, and crosslinked polymers, is introduced. The mechanism and applications of DAE-containing polymers in anti-counterfeiting, information encryption, light-controllable adhesives, and photoinduced healable materials are reviewed. In addition, the remaining challenges of DAE-containing polymers are also discussed.

Repairable Macroscopic Monodomain Arrays from Block Copolymers Enabled by Photoplastic and Photodielectric Effects

Upon exposure to UV light (120 mW/cm², λ = 365 nm), a trans-cis isomerization occurs in a cylinder-forming, azobenzene-containing block copolymer of polydimethylsiloxane-b-poly((4(phenyldiazenyl)phenoxy)hexyl acrylate) (PDMS-b-PPHA) that enables the generation of monodomains of healable, long-range ordered arrays of nanoscopic domains over macroscopic distances. The trans-cis isomerization gives rise to a significant increase in the dielectric constant (from 6.52 to 19.8 at 100 Hz, photodielectric behavior) and a dramatic decrease in the T_g (from 54 to 1 °C, photoplastic behavior) of the PPHA block. By combining these characteristics with an in-plane electric field, macroscopic monodomains of near-perfectly aligned cylindrical microdomains are achieved at low temperatures, and a damage repair is clearly uncovered, where the 300 nm wide scratches can be completely healed at 40 °C, leaving a smooth, uniformly thick film where the continuity and orientation of the aligned microdomains are restored. Subsequent exposure to visible light causes a cis-trans isomerization, increasing the matrix T_g to 54 °C, producing highly oriented and aligned PDMS cylindrical microdomains in a PPHA matrix.

Surface Morphing of Azopolymers toward Advanced Anticounterfeiting Enabled by a Two-Step Method: Light Writing and Then Reading in Liquid

Surface morphing of organic materials is necessary for advances in semiconductor processing, optical gratings, anticounterfeiting etc., but it is still challenging, especially for its fundamental explanation and further applications like advanced anticounterfeiting. Here, we report one strategy to acquire surface deformation of the liquid-crystalline azopolymer film using a two-step method: selective photoisomerization of azopolymers and then solvent development. In the first step, surface tension of the polymer film can be patterned by the selective photoisomerization of azopolymers, and then in the second step, the flowing solvent drags the underlying polymer to transport, leading to the formation of surface deformation. Interestingly, the direction of mass transport is opposite to the traditional Marangoni flow, and the principle of solvents' choice is the matching of surface tensions between the azopolymer and the solvent. The two-step method shows characteristics of efficient surface morphing, which could be applied in advanced anticounterfeiting by the way of photomask-assistant information writing or microscale direct writing, and then reading in a specific liquid environment. This paves a new way for understanding the mechanism of mass transport toward numerous unprecedented applications using various photoresponsive materials.

Realizing Photoswitchable Mechanoluminescence in Organic Crystals Based on Photochromism

Organic mechanoluminescent (ML) materials possessing photophysical properties that are sensitive to multiple external stimuli have shown great potential in many fields, including optic and sensing. Particularly, the photoswitchable ML property for these materials is fundamental to their applications but remains a formidable challenge. Herein, photoswitchable ML is successfully realized by endowing reversible photochromic properties to an ML molecule, namely 2-(1,2,2-triphenylvinyl) fluoropyridine (o-TPF). o-TPF shows both high-contrast photochromism with a distinct color change from white to purplish red, as well as bright blue ML (λ_ML  = 453 nm). The ML property can be repeatedly switched between ON and OFF states under alternate UV and visible light irradiation. Impressively, the photoswitchable ML is of high stability and repeatability. The ML can be reversibly switched on and off by conducting alternate UV and visible light irradiation in cycles under ambient conditions. Experimental results and theoretical calculations reveal that the change of dipole moment of o-TPF during the photochromic process is responsible for the photoswitchable ML. These results outline a fundamental strategy to achieve for the control of organic ML and pave the way to the development of expanded smart luminescent materials and their applications.

Understanding the formation of surface relief gratings in azopolymers: A combined molecular dynamics and experimental study

The formation of surface relief gratings in thin azopolymeric films is investigated using atomistic molecular dynamics simulations and compared to experimental results for the specific case of poly-disperse-orange3-methyl-methacrylate. For this purpose, the film is illuminated with a light pattern of alternating bright and dark stripes in both cases. The simulations use a molecular mechanics switching potential to explicitly describe the photoisomerization dynamics between the E and Z isomers of the azo-units and take into account the orientation of the transition dipole moment with respect to the light polarization. Local heating and elevation of the illuminated regions with the subsequent movement of molecules into the neighboring dark regions are observed. This leads to the formation of valleys in the bright areas after re-cooling and is independent of the polarization direction. To verify these observations experimentally, the azopolymer film is illuminated with bright stripes of varying width using a spatial light modulator. Atomic force microscopy images confirm that the elevated areas correspond to the previously dark areas. In the experiment, the polarization of the incident light makes only a small difference since tiny grain-like structures form in the valleys only when the polarization is parallel to the stripes.

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Photoresponsive phase change materials (PPCMs) are capable of storing photon and heat energy simultaneously and releasing the stored energy as heat in a controllable way. While, the azobenzene-based PPCMs exhibit a contradiction between gravimetric energy storage density and photoinduced phase change. Here, a type of azobenzene surfactants with balance between molecular free volume and intermolecular interaction is designed in molecular level, which can address the coharvest of photon energy and low-grade heat energy at room temperature. Such PPCMs gain the total gravimetric energy density up to 131.18 J g^-1 by charging solid sample and 160.50 J g^-1 by charging solution. Notably, the molar isomerization enthalpy upgrades by a factor of up to 2.4 compared to azobenzene. The working mechanism is explained by the computational studies. All the stored energy can release out as heat under Vis light, causing a fast surface temperature rise. This study demonstrates a new molecular designing strategy for developing azobenzene-based PPCMs with high gravimetric energy density by improving the photon energy storage.

Organic‒inorganic semi-interpenetrating networks with orthogonal light- and magnetic-responsiveness for smart photonic gels

Living matter has the ability to perceive multiple stimuli and respond accordingly. However, the integration of multiple stimuli-responsiveness in artificial materials usually causes mutual interference, which makes artificial materials work improperly. Herein, we design composite gels with organic‒inorganic semi-interpenetrating network structures, which are orthogonally responsive to light and magnetic fields. The composite gels are prepared by the co-assembly of a photoswitchable organogelator (Azo-Ch) and superparamagnetic inorganic nanoparticles (Fe₃O₄@SiO₂). Azo-Ch assembles into an organogel network, which shows photoinduced reversible sol-gel transitions. In gel or sol state, Fe₃O₄@SiO₂ nanoparticles reversibly form photonic nanochains via magnetic control. Light and magnetic fields can orthogonally control the composite gel because Azo-Ch and Fe₃O₄@SiO₂ form a unique semi-interpenetrating network, which allows them to work independently. The orthogonal photo- and magnetic-responsiveness enables the fabrication of smart windows, anti-counterfeiting labels, and reconfigurable materials using the composite gel. Our work presents a method to design orthogonally stimuli-responsive materials.

Pd(II)-catalyzed coupling of C-H bonds of carboxamides with iodoazobenzenes toward modified azobenzenes

In this paper, we report a synthetic protocol for the construction of biaryl motif-based or π-extended azobenzene and alkylated azobenzene derivatives via the Pd(II)-catalyzed bidentate directing group (DG)-aided C-H activation and functionalization strategy. In the past, the synthesis of biaryl motif-based azobenzenes was accomplished through the traditional cross-coupling reaction involving organometallic reagents and aryl halides or equivalent coupling partners. We have shown the direct coupling of C-H bonds of aromatic/aliphatic carboxamides (possessing a DG) with iodoazobenzenes as the coupling partners through the Pd(II)-catalyzed bidentate DG-aided, site-selective C-H functionalization method. Azobenzene-containing compounds are a versatile class of photo-responsive molecules that have found applications across branches of chemical, biological and materials sciences and are prevalent in medicinally relevant molecules. Accordingly, the synthesis of new and functionalized azobenzene-based scaffolds has been an attractive topic of research. Although the classical methods are efficient, they need pre-functionalized starting materials. This protocol involving the Pd(II)-catalyzed, directing group-aided site-selective C-H arylation of aromatic and aliphatic carboxamides using iodoazobenzene as the coupling partner affording azobenzene-based carboxamides is an additional route and also a contribution towards enriching the library of modified azobenzenes. We have also shown the photoswitching properties of representative compounds synthesized via the Pd(II)-catalyzed directing group-aided site-selective C-H functionalization method.

Photo-and Heat-Induced Dismantlable Adhesion Interfaces Prepared by Layer-by-Layer Deposition

The development of a dismantlable adhesion technology that allows switching between bonding and debonding states using external stimuli is important for realizing renewable and sustainable material cycles. Controlling the adhesion interface is an effective approach to manipulate the adhesion strength; however, research on dismantlable systems focusing on the interface has not been proceeded. Recently, we demonstrated a novel dismantlable system based on a stimuli-responsive molecular layer comprising cleavable anthracene dimers, which strengthen the initial adhesive force by forming chemical bonds between the substrate and adhesive and can be dismantled when required via stimulation-induced bond breaking. Here, we evaluate the use of the anthracene-based molecular layer with different components for verifying its versatility in the adhesive/dismantling system. The formation of the cleavable molecular layer by the stacking of relevant molecules enabled its usage with two types of adhesives, an epoxy adhesive and a silane-modified polymer adhesive. The initial adhesive strengths were improved in both types of molecular layers by creating chemical bonds at the adhesion interfaces. Light irradiation or heating stimuli for 1 min reduced the peel strength by up to 65%, and dismantling occurred in the cleavable photodimer layer. This study expands the versatile applicability of the molecular layer-based dismantling system.