Selective Arene Hydrogenation for Direct Access to Saturated Carbo- and Heterocycles

Electrocatalytic Hydrogenation of Pyridines and Other Nitrogen-Containing Aromatic Compounds

The production of cyclic amines, which are vital to the pharmaceutical industry, relies on energy-intensive thermochemical hydrogenation. Herein, we demonstrate the electrocatalytic hydrogenation of nitrogen-containing aromatic compounds, specifically pyridine, at ambient temperature and pressure via a membrane electrode assembly with an anion-exchange membrane. We synthesized piperidine using a carbon-supported rhodium catalyst, achieving a current density of 25 mA cm-2 and a current efficiency of 99% under a circular flow until 5 F mol-1. Quantitative conversion of pyridine into piperidine with 98% yield was observed after passing 9 F mol-1, corresponding to 65% of current efficiency. The reduction of Rh oxides on the catalyst surface was crucial for catalysis. The Rh(0) surface interacts moderately with piperidine, decreasing the energy required for the rate-determining desorption step. The proposed process is applicable to other nitrogen-containing aromatic compounds and could be efficiently scaled up. This method presents clear advantages over traditional high-temperature and high-pressure thermochemical catalytic processes.

Electroinduced Reductive and Dearomative Alkene-Aldehyde Coupling

The direct coupling of alkene feedstocks with aldehydes represents an expedient approach to the generation of new and structurally diverse C(sp3)-hybridized alcohols that are primed for elaboration into privileged architectures. Despite their abundance, current disconnection strategies enabling the direct coupling of carbon-carbon π-bonds and aldehydes remain challenging because contemporary methods are often limited by substrate or functional group tolerance and compatibility in complex molecular environments. Here, we report a coupling between simple alkenes, heteroarenes and unactivated aliphatic aldehydes via an electrochemically induced reductive activation of C-C π-bonds. The cornerstone of this approach is the discovery of rapid alternating polarity (rAP) electrolysis to access and direct highly reactive radical anion intermediates derived from conjugated alkenes and heterocyclic compounds. Our developed catalyst-free protocol enables direct access to new and structurally diverse C(sp3)-hybridized alcohol products. This is achieved by the controlled reduction of conjugated alkenes and the C2-C3 π-bond in heteroarenes via an unprecedented reductive dearomative functionalization for heterocyclic compounds. Experimental mechanistic studies demonstrate a kinetically biased single-electron reduction of C-C π-bonds over aldehydes. Application of rAP enables chemoselective generation of olefinic radical anion intermediates and avoids undesired saturative overreduction. Overall, this technology provides a versatile approach to the reductive coupling of olefin and heterocycle feedstocks with aliphatic aldehydes, offering straightforward access to diverse C(sp3)-rich oxygenated scaffolds.

Atomically Dispersed Palladium Catalyst for Chemoselective Hydrogenation of Quinolines

Chemoselective hydrogenation of quinoline and its derivatives is a significant strategy to achieve the corresponding 1,2,3,4-tetrahydroquinolines (py-THQ) for various potential applications. Here, we precisely constructed a titanium carbide supported atomically dispersed Pd catalyst (PdSA+NC/TiC) for quinoline hydrogenation, delivering above 99% py-THQ selectivity at complete conversion with an outstanding turnover frequency (TOF) of 463 h-1. AC-HAADF-STEM and XAFS demonstrate that the atomic dispersion of Pd includes Pd-Ti2C2 single atoms and Pd clusters with atomic-layer thickness. Theoretical calculation and experimental results revealed that H2 dissociation and subsequent hydrogenation rates were greatly promoted over Pd clusters. Although the adsorption of quinolines and intermediates are easier on Pd clusters than on Pd single atoms, the desorption of py-THQ is more favored over Pd single atoms than over Pd clusters. The desorption step may be the main reason for 5,6,7,8-tetrahydroquinoline (bz-THQ) and decahydroquinoline (DHQ) formation. Thus, a low reaction activity and py-THQ selectivity were received over PdSA/TiC and PdNP/TiC, respectively.

A Modular Approach for Accessing 3D Heterocycles via 1,2-Dicyanation of Planar N-Heteroarenes

The rapid construction of three-dimensional (3D) heterocyclic frameworks is a key challenge in contemporary medicinal chemistry. The molecules with three-dimensional complexity hold a greater probability to improve clinical outcomes, solubility, selectivity for target proteins, and metabolic stability. However, the prevalence of flat molecules persists among new drug candidates, primarily owing to the multitude of chemical methods available for their synthesis. In principle, the dearomative functionalization of N-heteroarene allows for the conversion of readily available planar molecules into partially or fully saturated nitrogen heterocycles, which are most significant structural motifs of pharmaceuticals and natural products. Unfortunately, these reactions are very rare because of the inherent challenge imposed by heteroarenes' poor reactivity, rendering the process thermodynamically unfavorable. Herein, we report a modular approach for accessing 3D chemical space in translating planar heteroarenes into valuable 3D heterocycles via the installation of a highly versatile cyano group as a new vector. This approach is enabled by the in situ generation of reactive, non-symmetric iodane by combining cyanide anion and bench-stable PhI(OAc)2. This reaction represents a rare example of 1,2-dicyanation of N-heteroarenes that meets the numerous requirements for broad implementation in drug and agrochemical discovery. The transformation is highly selective and amenable to a wide range of N-heteroarenes and late-stage partial saturation of drugs and agrochemicals.

Colloidal Bimetallic RuNi Particles and their Behaviour in Catalytic Quinoline Hydrogenation

Colloidal metal nanoparticles exhibit interesting catalytic properties for the hydrogenation of (hetero)arenes. Catalysts based on precious metals, such as Ru and Rh, promote this reaction efficiently under mild reaction conditions. In contrast, heterogeneous catalysts based on earth-abundant metals can selectively hydrogenate (hetero)arenes but require harsher reaction conditions. Bimetallic catalysts that combine precious and earth-abundant metals are interesting materials to mitigate the drawbacks of each component. To this end, RuNi nanoparticles bearing a phosphine ligand were prepared through the decomposition of [Ru(η4-C8H12)(η6-C8H10)] and [Ni(η4-C8H12)2] by H2 at 85 °C. Wide angle X-ray scattering confirmed a bimetallic segregated structure, with Ni predominantly on the surface. Spectroscopic analyses revealed that the phosphine ligand coordinated to the surface of both metals, suggesting, as well, a partial Ni shell covering the Ru core. The RuNi-based nanomaterials were used as catalysts in the hydrogenation of quinoline to assess the impact of the metallic composition and of the stabilizing agent on their catalytic performance.

Highly enantioselective synthesis of both enantiomers of tetrahydroquinoxaline derivatives via Ir-catalyzed asymmetric hydrogenation

A novel Ir-catalyzed asymmetric hydrogenation protocol for the synthesis of chiral tetrahydroquinoxaline (THQ) derivatives has been developed. By simply adjusting the reaction solvent, both enantiomers of mono-substituted chiral THQs could be selectively obtained in high yields with excellent enantioselectivities (toluene/dioxane: up to 93% yield and 98% ee (R); EtOH: up to 83% yield and 93% ee (S)). For 2,3-disubstituted chiral THQs, the cis-hydrogenation products were obtained with up to 95% yield, 20 : 1 dr, and 94% ee. Remarkably, this methodology was also applicable under continuous flow conditions, yielding gram-scale products with comparable yields and enantioselectivities (dioxane: 91% yield and 93% ee (R); EtOH: 90% yield and 87% ee (S)). Unlike previously reported Ir-catalyzed asymmetric hydrogenation protocols, this system exhibited a significant improvement as it required no additional additives. Furthermore, comprehensive mechanistic studies including deuterium-labeling experiments, control experiments, kinetic studies, and density functional theory (DFT) calculations were conducted to reveal the underlying mechanism of enantioselectivities for both enantiomers.

Electrophile-Arene Affinity: An Energy Scale for Evaluating the Thermodynamics of Electrophilic Dearomatization Reactions

Rational design and development of organic reactions are lofty goals in synthetic chemistry. Quantitative description of the properties of molecules and reactions by physical organic parameters plays an important role in this regard. In this Article, we report an energy scale, namely, electrophile-arene affinity (EAA), for evaluating the thermodynamics of electrophilic dearomatization reactions, a class of important transformations that can rapidly build up molecular complexity and structural diversity by converting planar aromatic compounds into three-dimensional cyclic molecules. The acquisition of EAA data can be readily achieved by theoretically calculating the enthalpy changes (ΔH) of the hypothetical reactions of various (cationic) electrophiles with aromatic systems (taking the 1-methylnaphthalen-2-olate ion as an example in this study). Linear correlations are found between the calculated ΔH values and established physical organic parameters such as the percentage of buried volume %VBur (steric effect), Hammett's σ or Brown's σ+ (electronic effect), and Mayr's E (reaction kinetics). Careful analysis of the ΔH values leads to the rational design of a dearomative alkynylation reaction using alkynyl hypervalent iodonium reagents as the electrophiles.

Scalable and Selective Electrochemical Hydrogenation of Polycyclic Arenes

The reduction of aromatic compounds constitutes a fundamental and ongoing area of investigation. The selective reduction of polycyclic aromatic compounds to give either fully or partially reduced products remains a challenge, especially in applications to complex molecules at scale. Herein, we present a selective electrochemical hydrogenation of polycyclic arenes conducted under mild conditions. A noteworthy achievement of this approach is the ability to finely control both the complete and partial reduction of specific aromatic rings within polycyclic arenes by judiciously varying the reaction solvents. Mechanistic investigations elucidate the pivotal role played by in situ proton generation and interface regulation in governing reaction selectivity. The reductive electrochemical conditions show a very high level of functional-group tolerance. Furthermore, this methodology represents an easily scalable reduction (demonstrated by the reduction of 1 kg scale starting material) using electrochemical flow chemistry to give key intermediates for the synthesis of specific drugs.

Switchable and Chemoselective Arene Hydrogenation for Efficient Late Stage Applications

The incorporation of three-dimensional structures into drug molecules has demonstrated significant improvements in clinical success. Late-stage saturation of drug molecules provides a direct pathway for this transformation. However, achieving selective and controllable reduction of aromatic rings remains challenging, particularly when multiple aromatic rings coexist. Herein, we present the switchable and chemoselective hydrogenation of benzene and pyridine rings. The utility of the protocol has been comprehensively investigated in diversified substrates with the assistance of a fragment-screening technique. This approach provides convenient access to a diverse array of cyclohexane and piperidine compounds, prevalent in various bioactive molecules and drugs. Furthermore, it discloses promising avenues for applications in the late-stage switchable saturation of drugs, facilitating an increase in the fraction of sp3-carbons which holds the potential to enhance the medicinal properties of drugs.

Synthetic techniques for thermodynamically disfavoured substituted six-membered rings

Six-membered rings are ubiquitous structural motifs in bioactive compounds and multifunctional materials. Notably, their thermodynamically disfavoured isomers, like disubstituted cyclohexanes featuring one substituent in an equatorial position and the other in an axial position, often exhibit enhanced physical and biological activities in comparison with their opposite isomers. However, the synthesis of thermodynamically disfavoured isomers is, by its nature, challenging, with only a limited number of possible approaches. In this Review, we summarize and compare synthetic methodologies that produce substituted six-membered rings with thermodynamically disfavoured substitution patterns. We place particular emphasis on elucidating the crucial stereoinduction factors within each transformation. Our aim is to stimulate interest in the synthesis of these unique structures, while simultaneously providing synthetic chemists with a guide to approaching this synthetic challenge.

Pd/C-Catalyzed Stereoselective Arene Hydrogenation of Benzocyclobutenes Enabled by π-Bond Localization

We developed here a Pd/C-catalyzed diastereoselective cis-hydrogenation of benzocyclobutene derivatives under mild conditions to deliver an array of bicyclo[4.2.0]octane scaffolds with up to five stereocenters. The π-bond localization enabled hydrogenation of the arene moiety to occur even at room temperature under 1 atm of a H2 atmosphere.

CoH-catalyzed asymmetric remote hydroalkylation of heterocyclic alkenes: a rapid approach to chiral five-membered S- and O-heterocycles

Saturated heterocycles, which incorporate S and O heteroatoms, serve as fundamental frameworks in a diverse array of natural products, bioactive compounds, and pharmaceuticals. Herein, we describe a unique cobalt-catalyzed approach integrated with a desymmetrization strategy, facilitating precise and enantioselective remote hydroalkylation of unactivated heterocyclic alkenes. This method delivers hydroalkylation products with high yields and excellent stereoselectivity, representing good efficiency in constructing alkyl chiral centers at remote C3-positions within five-membered S/O-heterocycles. Notably, the broad scope and good functional group tolerance of this asymmetric C(sp3)-C(sp3) coupling enhance its applicability.

Recent Advances in Dearomative Partial Reduction of Benzenoid Arenes

Dearomative partial reduction is an extraordinary approach for transforming benzenoid arenes and has been well-known for many decades, as exemplified by the dehydrogenation of Birch reduction and the hydroarylation of Crich addition. Despite its remarkable importance in synthesis, this field has experienced slow progress over the last half-century. However, a revival has been observed with the recent introduction of electrochemical and photochemical methods. In this Minireview, we summarize the recent advancements in dearomative partial reduction of benzenoid arenes, including dihydrogenation, hydroalkylation, arylation, alkenylation, amination, borylation and others. Further, the intriguing utilization of dearomative partial reduction in the synthesis of natural products is also emphasized. It is anticipated that this Minireview will stimulate further progress in arene dearomative transformations.

Arene Reduction by Rh/Pd or Rh/Pt under 1 atm Hydrogen Gas and Room Temperature

Current methods for arene hydrogenation generally need either harsh reaction conditions or complex catalyst preparation. Here we describe a mild and convenient protocol that only utilizes commercially available catalysts. Using [Rh(nbd)Cl]2 and Pd/C together as catalysts, arenes bearing various functional groups can be hydrogenated under 1 atm of H2 at room temperature. This arene hydrogenation can also be achieved using catalysts of [Rh(cod)Cl]2 and PtO2, thus avoiding glovebox manipulations and simplifying the reaction procedure.

Iridium-Catalyzed Asymmetric Hydrogenation of Heteroaromatics with Multiple N Atoms via Substrate Activation: An Entry to 4,5,6,7-Tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile Core of a Potent BTK Inhibitor

The chiral 4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine is the key core skeleton of potent Bruton's tyrosine kinase (BTK) inhibitor Zanubrutinib, and the catalyst-controlled asymmetric hydrogenation of planar multinuclear pyrimidine heteroarenes with multiple N atoms could provide an efficient route toward its synthesis. Owing to the strong aromaticity and poisoning effect toward chiral transition metal catalyst, asymmetric hydrogenation of pyrazolo[1,5-a]pyrimidines with multiple nitrogen atoms is still a challenge for synthesizing the chiral 4,5,6,7-tetrahydropyrazolo[1,5-a]-pyrimidine. Herein, an efficient iridium-catalyzed asymmetric hydrogenation of pyrazolo[1,5-a]pyrimidines has been developed using substrate activation strategy, with up to 99% ee. The decagram scale synthesis further demonstrated the potential and promise of this procedure in the synthesis of Zanubrutinib. In addition, a mechanistic study indicated that the hydrogenation starts with 1,2-hydrogenation.

Access to C(sp3) borylated and silylated cyclic molecules: hydrogenation of corresponding arenes and heteroarenes

This paper presents a simple and cost-effective hydrogenation method for synthesizing a myriad of cycloalkanes and saturated heterocycles bearing boryl or silyl substituents. The catalyst used are heterogeneous, readily available, bench stable, and recyclable. Also demonstrated is the application of the method to compounds that possess both boryl and silyl groups. When combined with Ir-catalyzed sp2 C-H borylation, such hydrogenations offer a two-step complementary alternative to direct sp3 C-H borylations that can suffer selectivity and reactivity issues. Of practical value to the community, complete stereochemical analyses of reported borylated compounds that were never fully characterized are reported herein.

Chemoselective Heterogeneous Hydrogenation of Sulfur Containing Quinolines under Mild Conditions

Sulfur, alongside oxygen and nitrogen, holds a prominent position as one of the key heteroatoms in nature and medicinal chemistry. Its significance stems from its ability to adopt different oxidation states, rendering it valuable as both a polarity handle and a hydrogen bond donor/acceptor. Nevertheless, the poisonous nature of its free electron pairs makes sulfur containing substrates inaccessible for many catalytic protocols. Strong and (at low temperatures) irreversible chemisorption to the catalyst's surface is in particular detrimental for heterogeneous catalysts, possessing only few catalytically active sites. Herein, we present a novel heterogeneous Ru-S catalyst that tolerates multiple sulfur functionalities, including thioethers, thiophenes, sulfoxides, sulfones, sulfonamides, and sulfoximines, in the hydrogenation of quinolines. The utility of the products was further demonstrated by subsequent diversifications of the sulfur functionalities.

Recent Strategies in the Nucleophilic Dearomatization of Pyridines, Quinolines, and Isoquinolines

Dearomatization reactions have become fundamental chemical transformations in organic synthesis since they allow for the generation of three-dimensional complexity from two-dimensional precursors, bridging arene feedstocks with alicyclic structures. When those processes are applied to pyridines, quinolines, and isoquinolines, partially or fully saturated nitrogen heterocycles are formed, which are among the most significant structural components of pharmaceuticals and natural products. The inherent challenge of those transformations lies in the low reactivity of heteroaromatic substrates, which makes the dearomatization process thermodynamically unfavorable. Usually, connecting the dearomatization event to the irreversible formation of a strong C-C, C-H, or C-heteroatom bond compensates the energy required to disrupt the aromaticity. This aromaticity breakup normally results in a 1,2- or 1,4-functionalization of the heterocycle. Moreover, the combination of these dearomatization processes with subsequent transformations in tandem or stepwise protocols allows for multiple heterocycle functionalizations, giving access to complex molecular skeletons. The aim of this review, which covers the period from 2016 to 2022, is to update the state of the art of nucleophilic dearomatizations of pyridines, quinolines, and isoquinolines, showing the extraordinary ability of the dearomative methodology in organic synthesis and indicating their limitations and future trends.

Transfer Hydrogenation of N- and O-Containing Heterocycles Including Pyridines with H3N-BH3 Under the Catalysis of the Homogeneous Ruthenium Precatalyst

In this study, we report a transfer hydrogenation protocol that utilizes borane-ammonia (H3N-BH3) as the hydrogen source and a commercially available RuCl3·xH2O precatalyst for the selective aromatic reduction of quinolines, quinoxalines, pyridines, pyrazines, indoles, benzofurans, and furan derivatives to form the corresponding alicyclic heterocycles in good to excellent isolated yields. Applications of this straightforward protocol include the efficient preparation of useful key pharmaceutical intermediates, such as donepezil and flumequine, including a biologically active compound.

Broad Survey of Selectivity in the Heterogeneous Hydrogenation of Heterocycles

A broad survey of heterogeneous hydrogenation catalysts has been conducted for the reduction of heterocycles commonly found in pharmaceuticals. The comparative reactivity of these substrates is reported as a function of catalyst, temperature, and hydrogen pressure. This analysis provided several catalysts with complementary reactivity between substrates. We then explored a series of bisheterocyclic substrates that provided an intramolecular competition of heterocycle hydrogenation reactivity. In several cases, complete selectivity could be achieved for reduction of one heterocycle and isolated yields are reported. A general trend in reactivity is inferred in which quinoline is the most reactive, followed by pyrazine, then pyrrole and with pyridine being the least reactive.

Oxidative Dearomatization of Pyridines

Dearomatization of pyridines is a well-established synthetic approach to access piperidines. Although remarkably powerful, existing dearomatization processes have been limited to the hydrogenation or addition of carbon-based nucleophiles to activated pyridiniums. Here, we show that arenophile-mediated dearomatizations can be applied to pyridines to directly introduce heteroatom functionalities without prior substrate activation. The arenophile platform in combination with olefin oxidation chemistry provides access to dihydropyridine cis-diols and epoxides. These previously elusive compounds are now readily accessible and can be used for the downstream preparation of diversely functionalized piperidines.

Photochemical Reduction of Quinolines with γ-Terpinene

The saturation of aromatic scaffolds is valuable for the synthesis of complex rings. Herein, we demonstrate a process for photochemical dearomative reduction of quinolines. The process involves capture of a quinoline excited state with γ-terpinene. Importantly, the reaction is chemoselective as other easily reduced functionalities such as halogens or alkenes do not undergo reduction. The mechanism of the reaction has also been investigated. Finally, the generality of the approach towards other substrates is demonstrated.

From Conventional to Sustainable Catalytic Approaches for Heterocycles Synthesis

Synthesis of heterocyclic compounds is fundamental for all the research area in chemistry, from drug synthesis to material science. In this framework, catalysed synthetic methods are of great interest to effective reach such important building blocks. In this review, we will report on some selected examples from the last five years, of the major improvement in the field, focusing on the most important conventional catalytic systems, such as transition metals, organocatalysts, to more sustainable ones such as photocatalysts, iodine-catalysed reaction, electrochemical reactions and green innovative methods.

Colloidal ruthenium catalysts for selective quinaldine hydrogenation: Ligand and solvent effects

Colloidal Ru nanoparticles (NP) display interesting catalytic properties for the hydrogenation of (hetero)arenes as they proceed efficiently in mild reaction conditions. In this work, a series of Ru based materials was used in order to selectively hydrogenate quinaldine and assess the impact of the stabilizing agent on their catalytic performances. Ru nanoparticles stabilized with polyvinylpyrrolidone (PVP) and 1-adamantanecarboxylic acid (AdCOOH) allowed to obtain 5,6,7,8-tetrahydroquinaldine with a remarkable selectivity in mild reaction conditions by choosing the suitable solvent. The presence of a carboxylate ligand on the surface of the Ru NP led to an increase in the activity when compared to Ru/PVP catalyst. The stabilizing agent had also an impact on the selectivity, as carboxylate ligand modified catalysts promoted the selectivity towards 1,2,3,4-tetrahydroquinaldine, with bulky carboxylate displaying the highest ones.

Protocol for stereodivergent asymmetric hydrogenation of quinoxalines

Chiral 1,2,3,4-tetrahydroquinoxalines are ubiquitous in natural products and bioactive molecules. Herein, we disclose a protocol for stereodivergent asymmetric hydrogenation of disubstituted quinoxalines for the preparation of both cis- and trans-enantioenriched disubstituted tetrahydroquinoxalines (up to >20:1 d.r. and 99% ee). We describe steps for synthesis of ligands and substrate, setup of hydrogenation of disubstituted quinoxalines, and purification of products. Additionally, we provide detailed diagrams of the hydrogenation installation. For complete details on the use and execution of this protocol, please refer to Liu et al.1.

The Construction of Highly Substituted Piperidines via Dearomative Functionalization Reaction

Nitrogen heterocycles play a vital role in pharmaceuticals and natural products, with the six-membered aromatic and aliphatic architectures being commonly used. While synthetic methods for aromatic N-heterocycles are well-established, the synthesis of their aliphatic functionalized analogues, particularly piperidine derivatives, poses a significant challenge. In that regard, we propose a stepwise dearomative functionalization reaction for the construction of highly decorated piperidine derivatives with diverse functional handles. We also discuss challenges related to site-selectivity, regio- and diastereoselectivity, and provide insights into the reaction mechanism through mechanistic studies and density functional theory computations.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Chemoselective Quinoline and Isoquinoline Reduction by Energy Transfer Catalysis Enabled Hydrogen Atom Transfer

(Hetero)arene reduction is one of the key avenues for synthesizing related cyclic alkenes and alkanes. While catalytic hydrogenation and Birch reduction are the two broadly utilized approaches for (hetero)arene reduction across academia and industry over the last century, both methods have encountered significant chemoselectivity challenges. We hereby introduce a highly chemoselective quinoline and isoquinoline reduction protocol operating through selective energy transfer (EnT) catalysis, which enables subsequent hydrogen atom transfer (HAT). The design of this protocol bypasses the conventional metric of reduction reaction, that is, the reductive potential, and instead relies on the triplet energies of the chemical moieties and the kinetic barriers of energy and hydrogen atom transfer events. Many reducing labile functional groups, which were incompatible with previous (hetero)arene reduction reactions, are retained in this reaction. We anticipate that this protocol will trigger the further advancement of chemoselective arene reduction and enable the current arene-rich drug space to escape from flatland.

meta-Selective C-H Functionalization of Pyridines

The pyridine moiety is an important core structure for a variety of drugs, agrochemicals, catalysts, and functional materials. Direct functionalization of C-H bonds in pyridines is a straightforward approach to access valuable substituted pyridines. Compared to the direct ortho- and para-functionalization, meta-selective pyridine C-H functionalization is far more challenging due to the inherent electronic properties of the pyridine entity. This review summarizes currently available methods for pyridine meta-C-H functionalization using a directing group, non-directed metalation, and temporary dearomatization strategies. Recent advances in ligand control and temporary dearomatization are highlighted. We analyze the advantages as well as limitations of current techniques and hope to inspire further developments in this important area.

An Asymmetric Hydrogenation/N-Alkylation Sequence for a Step-Economical Route to Indolizidines and Quinolizidines

The direct catalytic asymmetric hydrogenation of pyridines for the synthesis of piperidines remains a challenge. Herein, we report a one-pot asymmetric hydrogenation of pyridines with subsequent N-alkylation using a traceless Brønsted acid activation strategy. Catalyzed by an iridium-BINAP complex, the substrates undergo ketone reduction, cyclization and pyridine hydrogenation in sequence to form indolizidines and quinolizidines. The absolute configuration of the stereocenter of the alcohol is retained and influences the formation of the second stereocenter. Experimental and theoretical mechanistic studies reveal that the chloride anion and certain noncovalent interactions govern the stereoselectivity of the cascade reaction throughout the catalytic process.

A robust Zintl cluster for the catalytic reduction of pyridines, imines and nitriles

Despite p-block clusters being known for over a century, their application as catalysts to mediate organic transformations is underexplored. Here, the boron functionalized [P7] cluster [(BBN)P7]2- ([1]2-; BBN = 9-borabicyclo[3.3.1]nonane) is applied in the dearomatized reduction of pyridines, as well as the hydroboration of imines and nitriles. These transformations afford amine products, which are important precursors to pharmaceuticals, agrochemicals, and polymers. Catalyst [1]2- has high stability in these reductions: recycling nine times in quinoline hydroboration led to virtually no loss in catalyst performance. The catalyst can also be recycled between two different organic transformations, again with no loss in catalyst competency. The mechanism for pyridine reduction was probed experimentally using variable time normalization analysis, and computationally using density functional theory. This work demonstrates that Zintl clusters can mediate the reduction of nitrogen containing substrates in a transition metal-free manner.

Arene Insertion with Pincer-Supported Molybdenum-Hydrides: Determination of Site Selectivity, Relative Rates, and Arene Complex Formation

The synthesis of phosphino(oxazoline)pyridine-supported molybdenum(0) cycloocta-1,5-diene complexes is described. Exposure of these complexes to dihydrogen in the presence of an arene resulted in insertion of the substrate into the molybdenum hydride bond and afforded the corresponding molybdenum cyclohexadienyl hydrides. For mono- and disubstituted arenes, the site selectivity for insertion of the most substituted bond increases with increasing size of the substituent from methyl to ethyl, iso-propyl, and tert-butyl. In contrast, 1,3,5-trisubstituted arenes underwent insertion with exclusive site selectivity. Relative rates of insertion were determined by competition experiments and established faster insertions for electron-rich arenes. Introduction of electron-withdrawing trifluoromethyl groups on the arene resulted in decreased relative rates of insertion and an increased rate for H2 reductive elimination, favoring formation of the corresponding molybdenum η6-arene complex. Studies on the reductive elimination of the cyclohexadienyl ligand with the hydride enabled the synthesis of an enantioenriched cyclohexa-1,3-diene. This study provides new insights into the ligand requirements for catalytic arene hydrogenation and a new strategy for selective arene reduction.

Ligand-Free Ultrasmall Recyclable Iridium(0) Nanoparticles for Regioselective Aromatic Hydrogenation of Phosphine Oxide Scaffolds: An Easy Access to New Phosphine Ligands

Herein, we developed the recyclable ligand-free iridium (Ir)-hydride based Ir0 nanoparticles (NPs) for the first regioselective partial hydrogenation of PV -substituted naphthalenes. Both the isolated and in situ generated NPs are catalytically active. A control nuclear magnetic resonance (NMR) study revealed the presence of metal-surface-bound hydrides, most likely formed from Ir0 species. A control NMR study confirmed that hexafluoroisopropanol as a solvent was accountable for substrate activation via hydrogen bonding. High-resolution transmission electron microscopy of the catalyst supports the formation of ultrasmall NPs, and X-ray photoelectron spectroscopy confirmed the dominance of Ir0 in the NPs. The catalytic activity of NPs is broad as showcased by highly regioselective aromatic ring reduction in various phosphine oxides or phosphonates. The study also showcased a novel pathway toward preparing bis(diphenylphosphino)-5,5',6,6',7,7',8,8'-octahydro-1,1'-binaphthyl (H8 -BINAP) and its derivatives without losing enantioselectivity during catalytic events.

Highly enantioselective Rh-catalyzed asymmetric reductive dearomatization of multi-nitrogen polycyclic pyrazolo[1,5-a]pyrimidines

A highly enantioselective rhodium-catalyzed reductive dearomatization of 7-substituted pyrazolo[1,5-a]pyrimidines has been realized for the first time by two strategies to afford chiral 4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidines with excellent enantioselectivities of up to 98% ee. This method also provides an efficient approach for the synthesis of the powerful BTK inhibitor, zanubrutinib.

Generation and Stabilization of a Dinickel Catalyst in a Metal-Organic Framework for Selective Hydrogenation Reactions

Although many monometallic active sites have been installed in metal-organic frameworks (MOFs) for catalytic reactions, there are no effective strategies to generate bimetallic catalysts in MOFs. Here we report the synthesis of a robust, efficient, and reusable MOF catalyst, MOF-NiH, by adaptively generating and stabilizing dinickel active sites using the bipyridine groups in MOF-253 with the formula of Al(OH)(2,2'-bipyridine-5,5'-dicarboxylate) for Z-selective semihydrogenation of alkynes and selective hydrogenation of C=C bonds in α,β-unsaturated aldehydes and ketones. Spectroscopic studies established the dinickel complex (bpy⋅- )NiII (μ2 -H)2 NiII (bpy⋅- ) as the active catalyst. MOF-NiH efficiently catalyzed selective hydrogenation reactions with turnover numbers of up to 192 and could be used in five cycles of hydrogenation reactions without catalyst leaching or significant decrease of catalytic activities. The present work uncovers a synthetic strategy toward solution-inaccessible Earth-abundant bimetallic MOF catalysts for sustainable catalysis.

PtIV-Containing Hexaplatinate(II) [PtIVPtII6O6(AsO2(CH3)2)6]2- and Hexapalladate(II) [PtIVPdII6O6(AsO2(CH3)2)6]2

The first PtIV-containing discrete polyoxoplatinate(II) [PtIVPtII6O6(AsO2(CH3)2)6]2- (Pt7) and polyoxopalladate(II) [PtIVPdII6O6(AsO2(CH3)2)6]2- (PtPd6) have been prepared and characterized in the solid state, in solution, and in the gas phase. The molecular structures of the noble metal-oxo clusters Pt7 and PtPd6 comprise a central, octahedral PtIVO6 hetero group surrounded by six square-planar MO4 (M = PtII, PdII) units, which are capped by six dimethylarsinate ligands. The polyanions were prepared under simple one-pot aqueous solution conditions by reacting H2Pt(OH)6 with either K2PtCl4 or Pd(NO3)2 in sodium dimethylarsinate buffer (pH 7) at 80 °C. Catalytic studies were performed on Pt7 supported on SBA15-apts for o-xylene hydrogenation at 300 °C and 90 bar H2 pressure and indicated excellent activity and recyclability with low activation temperature.

Enantioselective Transformations in the Synthesis of Therapeutic Agents

The proportion of approved chiral drugs and drug candidates under medical studies has surged dramatically over the past two decades. As a consequence, the efficient synthesis of enantiopure pharmaceuticals or their synthetic intermediates poses a profound challenge to medicinal and process chemists. The significant advancement in asymmetric catalysis has provided an effective and reliable solution to this challenge. The successful application of transition metal catalysis, organocatalysis, and biocatalysis to the medicinal and pharmaceutical industries has promoted drug discovery by efficient and precise preparation of enantio-enriched therapeutic agents, and facilitated the industrial production of active pharmaceutical ingredient in an economic and environmentally friendly fashion. The present review summarizes the most recent applications (2008-2022) of asymmetric catalysis in the pharmaceutical industry ranging from process scales to pilot and industrial levels. It also showcases the latest achievements and trends in the asymmetric synthesis of therapeutic agents with state of the art technologies of asymmetric catalysis.

Translating Planar Heterocycles into Three-Dimensional Analogs by Photoinduced Hydrocarboxylation

The rapid preparation of complex three-dimensional (3D) heterocyclic scaffolds is a key challenge in modern medicinal chemistry. Despite the increased probability of clinical success for small molecule therapeutic candidates with increased 3D complexity, new drug targets remain dominated by flat molecules due to the abundance of coupling reactions available for their construction. In principle, heteroarene hydrofunctionalization reactions offer an opportunity to transform readily accessible planar molecules into more three-dimensionally complex analogs through the introduction of a single molecular vector. Unfortunately, dearomative hydrofunctionalization reactions remain limited. Herein, we report a new strategy to enable the dearomative hydrocarboxylation of indoles and related heterocycles. This reaction represents a rare example of a heteroarene hydrofunctionalization that meets the numerous requirements for broad implementation in drug discovery. The transformation is highly chemoselective, broad in scope, operationally simple, and readily amenable to high-throughput experimentation (HTE). Accordingly, this process will allow existing libraries of heteroaromatic compounds to be translated into diverse 3D analogs and enable exploration of new classes of medicinally relevant molecules.

Enantioselective Synthesis of Chiral Cyclic Hydrazines by Ni-Catalyzed Asymmetric Hydrogenation

An efficient Ni-(S,S)-Ph-BPE complex that catalyzed asymmetric hydrogenation of cyclic N-acyl hydrazones has been developed to produce various chiral cyclic hydrazines in high yields with excellent enantioselectivities of up to >99% enantiomeric excess. Moreover, the hydrogenation can not only proceed smoothly on a gram scale under lower catalyst loading (S/C = 3000) without any decrease of enantioselectivity but can also be applied to the asymmetric synthesis of a RIP-1 kinase inhibitor.

Chromium-catalyzed stereodivergent E- and Z-selective alkyne hydrogenation controlled by cyclic (alkyl)(amino)carbene ligands

The hydrogenation of alkynes allows the synthesis of olefins, which are important feedstock for the materials, pharmaceutical, and petrochemical industry. Thus, methods that enable this transformation via low-cost metal catalysis are desirable. However, achieving stereochemical control in this reaction is a long-standing challenge. Here, we report on the chromium-catalyzed E- and Z-selective olefin synthesis via hydrogenation of alkynes, controlled by two carbene ligands. A cyclic (alkyl)(amino)carbene ligand that contains a phosphino anchor enables the hydrogenation of alkynes in a trans-addition manner, selectively forming E-olefins. With an imino anchor-incorporated carbene ligand, the stereoselectivity can be switched, giving mainly Z-isomers. This ligand-enabled geometrical stereoinversion strategy by one metal catalysis overrides common methods in control of the E- and Z-selectivity with two different metal catalysis, allowing for highly efficient and on-demand access to both E- and Z-olefins in a stereo-complementary fashion. Mechanistic studies indicate that the different steric effect between these two carbene ligands may mainly dominate the selective forming E- or Z-olefins in control of the stereochemistry.

cis-Selective Hydrogenation of Aryl Germanes: A Direct Approach to Access Saturated Carbo- and Heterocyclic Germanes

A catalytic approach of synthesizing the cis-selective saturated carbo- and heterocyclic germanium compounds (3D framework) is reported via the hydrogenation of readily accessible aromatic germanes (2D framework). Among the numerous catalysts tested, Nishimura's catalyst (Rh2O3/PtO2·H2O) exhibited the best hydrogenation reactivity with an isolated yield of up to 96%. A broad range of substrates including the synthesis of unprecedented saturated heterocyclic germanes was explored. This selective hydrogenation strategy could tolerate several functional groups such as -CF3, -OR, -F, -Bpin, and -SiR3 groups. The synthesized products demonstrated the applications in coupling reactions including the newly developed strategy of aza-Giese-type addition reaction (C-N bond formation) from the saturated cyclic germane product. These versatile motifs can have a substantial value in organic synthesis and medicinal chemistry as they show orthogonal reactivity in coupling reactions while competing with other coupling partners such as boranes or silanes, acquiring a three-dimensional structure with high stability and robustness.

Homogeneous Dearomative Hydrogenation with a Co/P4 N2 Catalyst: A Nucleophilic Approach

Arene hydrogenation is the most straightforward method to prepare carbo- and heterocycles. However, the high resonance energy prevents aromatic substrates from hydrogenation. Herein the homogeneous, nucleophilic hydrogenation of less electron-rich arenes and heteroarenes is reported. The Co(P₄ N₂ )H species that has been demonstrated to be a strong hydride donor could deliver a hydride ion to the cyano (hetero)arene substrates. Deuterium labeling experiments supported a Michael-type reaction pathway. Theoretical analyses have been conducted to investigate the hydricity of the catalytically active CoH species and the electrophilicity of the arene substrates. An outlook for the synthesis of more challenging substituted benzenes was proposed based on the in silico modification of the CoH species.

Screening of Palladium/Charcoal Catalysts for Hydrogenation of Diene Carboxylates with Isolated-Rings (Hetero)aliphatic Scaffold

A series of seven palladium-containing composites, i.e., four Pd/C and three Pd(OH)₂/C (Pearlman's catalysts), was prepared using modified common approaches to deposition of Pd or hydrated PdO on charcoal. All the composites were tested in the catalytic hydrogenation of diene carboxylates with the isolated-ring scaffold, e.g., 5,6-dihydropyridine-1(2H)-carboxylates with 2-(alkoxycarbonyl)cyclopent-1-en-1-yl and hex-1-en-1-yl substituents at the C(4)-position. The performance of the composites was also studied via the hydrogenation of quinoline as a model reaction. The composites were characterized by transmission and scanning electron microscopy (TEM and SEM), powder X-ray diffraction, and low-temperature N₂ adsorption. It was found that the composites containing Pd nanoparticles (NPs) of 5-40 nm size were the most efficient catalysts for the hydrogenation of dienes, providing the reduced products with up to 90% yields at p(H₂) = 100 atm, T = 30 °C for 24 h. The method of Pd NPs formation had more effect on the catalyst performance than the size of the NPs. The catalytic performance of Pearlman's catalysts (Pd(OH)₂/C) in the hydrogenation of dienes was comparable to or lower than the performance of the Pd/C systems, though the Pearlman's catalysts were more efficient in the hydrogenation of quinoline.

Identification of Cyclohexadienyl Hydrides as Intermediates in Molybdenum-Catalyzed Arene Hydrogenation

Treatment of phosphino(imino)pyridine (PIP) molybdenum cyclooctadiene (COD) complexes [(PIP)Mo(COD)] with dihydrogen in the presence of benzene selectively furnished the molybdenum cyclohexadienyl hydrides [(PIP)MoH(η⁵ -C₆ H₇ )], which are precatalysts for the hydrogenation of benzene to cyclohexane. [(PIP)MoH(η⁵ -C₆ H₇ )] arises from a rarely observed insertion of benzene into a molybdenum-hydride bond, a key step in the molybdenum-catalyzed homogeneous hydrogenation of arenes. The reaction with toluene afforded a single isomer of the corresponding molybdenum cyclohexadienyl hydride while para-xylene predominantly formed the molybdenum η⁶ -arene complex with the insertion product being a minor component. Addition of carbon monoxide to a cyclohexane-d₁₂ solution of [(PIP)MoH(η⁵ -C₆ H₇ )] liberated cyclohexadiene, providing experimental support for a higher kinetic barrier for the subsequent steps en route to cycloalkanes.

Dearomative logic in natural product total synthesis

Covering: 2011 to 2022The natural world is a prolific source of some of the most interesting, rare, and complex molecules known, harnessing sophisticated biosynthetic machinery evolved over billions of years for their production. Many of these natural products represent high-value targets of total synthesis, either for their desirable biological activities or for their beautiful structures outright; yet, the high sp3-character often present in nature's molecules imparts significant topological complexity that pushes the limits of contemporary synthetic technology. Dearomatization is a foundational strategy for generating such intricacy from simple materials that has undergone considerable maturation in recent years. This review highlights the recent achievements in the field of dearomative methodology, with a focus on natural product total synthesis and retrosynthetic analysis. Disconnection guidelines and a three-phase dearomative logic are described, and a spotlight is given to nature's use of dearomatization in the biosynthesis of various classes of natural products. Synthetic studies from 2011 to 2021 are reviewed, and 425 references are cited.

Visible Light-Mediated, Diastereoselective Epimerization of Morpholines and Piperazines to More Stable Isomers

We report a photocatalyzed epimerization of morpholines and piperazines that proceeds by reversible hydrogen atom transfer (HAT) and provides an efficient strategy for editing the stereochemical configurations of these saturated nitrogen heterocycles, which are prevalent in drugs. The more stable morpholine and piperazine isomers are obtained from the more synthetically accessible but less stable stereoisomers, and a broad scope is demonstrated in terms of substitution patterns and functional group compatibility. The observed distributions of diastereomers correlate well with the relative energies of the diastereomer pairs as determined by density functional theory (DFT) calculations. Mechanistic studies, including luminescence quenching, deuterium labeling reactions, and determination of reversibility support a thiyl radical mediated HAT pathway for the epimerization of morpholines. Investigation of piperazine epimerization established that the mechanism is more complex and led to the development of thiol free conditions for the highly stereoselective epimerization of N,N'-dialkyl piperazines for which a previously unrecognized radical chain HAT mechanism is proposed.

Rh-Catalyzed Sequential Asymmetric Hydrogenations of 3-Amino-4-Chromones Via an Unusual Dynamic Kinetic Resolution Process

Rh-catalyzed sequential asymmetric hydrogenations of 3-amino-4-chromones have been achieved for the first time via an unprecedented dynamic kinetic resolution under neutral conditions, providing (S,R)-3-amino-4-chromanols in high yields (up to 98%) with excellent enantio- and diastereoselectivities (up to 99.9% ee and 20:1 dr). The mechanistic studies based on control experiments and density functional theory (DFT) calculations suggest that the dynamic kinetic resolution process for the intermediate enantiomers generated in the first hydrogenation step proceeded via a stereomutation (or called chiral assimilation) pathway from an undesired enantiomer to the desired enantiomer rather than via traditional racemization of the undesired enantiomer. The protocol can be performed on a gram scale with a relatively low catalyst loading and offers a practical and convenient pathway for synthesizing a series of bioactive chromanols and their derivatives.