Synthesis and Characterization of a Pentiptycene‐Derived Dual Oligoparaphenylene Nanohoop

Boat-to-boat conformation inversions of cyclobis[7,8-(para-quinodimethane)-3,7-(9-(p-tolyl)-9H-carbazole)] in the neutral and tetracationic state

We report the synthesis of macrocyclic cyclobis[7,8-(para-quinodimethane)-3,7-(9-(p-tolyl)-9H-carbazole)] CBQCz. We found that CBQCz showed temperature-dependent and four-electron oxidative conformation changes. Both CBQCz and CBQCz4+ possess boat-to-boat conformation inversions. The smaller inverted energy and less curved structure of CBQCz4+ are due to the conjugated effect of tetracations.

Figure-Eight Bismacrocycles Derived from a Tetraphenylmethane Core and Oligoparaphenylene Loops

Cycloparaphenylenes have garnered significant interest due to their distinctive chemical and physical characteristics. This study presents the synthesis and comprehensive characterization of two bis-macrocycle molecules joined by cycloparaphenylene and tetraphenylmethane moieties. Both molecules were thoroughly characterized using NMR, MALDI-TOF-HRMS, and X-ray diffraction. UV-vis spectroscopy revealed maximum absorption peaks at 325 and 328 nm, while the two bismacrocycles exhibit fluorescence emissions at 470 and 457 nm, consistent with DFT calculations. The computational analysis also disclosed the HOMO-LUMO gaps of 3.373 and 3.342 eV.

Synthesis and Properties of a Strained Triple Nanohoop

A strained triple nanohoop with a shared central benzene unit is synthesized using a threefold intramolecular ring-closing approach. Among the five possible constitutional isomers, the isomer with the highest D3h symmetry is isolated, the structure of which contains three nanohoop blades and a central hexaphenylbenzene unit. The structure is elucidated using NMR spectroscopy and mass spectrometry. The optical and electrochemical properties are investigated, revealing a moderate fluorescence quantum yield of 40 %. A water-soluble nanomaterial is prepared using a nanoparticle encapsulation method, and a fluorescence quantum yield of 10 % is retained, which demonstrates the potential of the nanomaterial in biological systems.

Polycationic Open-Shell Cyclophanes: Synthesis of Electron-Rich Chiral Macrocycles, and Redox-Dependent Electronic States

π-Conjugated chiral nanorings with intriguing electronic structures and chiroptical properties have attracted considerable interests in synthetic chemistry and materials science. We present the design principles to access new chiral macrocycles (1 and 2) that are essentially built on the key components of main-group electron-donating carbazolyl moieties or the π-expanded aza[7]helicenes. Both macrocycles show the unique molecular conformations with a (quasi) figure-of-eight topology as a result of the conjugation patterns of 2,2',7,7'-spirobifluorenyl in 1 and triarylamine-coupled aza[7]helicene-based building blocks in 2. This electronic nature of redox-active, carbazole-rich backbones enabled these macrocycles to be readily oxidized chemically and electrochemically, leading to the sequential production of a series of positively charged polycationic open-shell cyclophanes. Their redox-dependent electronic states of the resulting multispin polyradicals have been characterized by VT-ESR, UV/Vis-NIR absorption and spectroelectrochemical measurements. The singlet (ΔES-T=-1.29 kcal mol-1) and a nearly degenerate singlet-triplet ground state (ΔES-T(calcd)=-0.15 kcal mol-1 and ΔES-T(exp)=0.01 kcal mol-1) were proved for diradical dications 12+2⋅ and 22+2⋅, respectively. Our work provides an experimental proof for the construction of electron-donating new chiral nanorings, and more importantly for highly charged polyradicals with potential applications in chirospintronics and organic conductors.

Host-Guest Chemistry in Binary and Ternary Complexes Utilizing π-Conjugated Carbon Nanorings

The carbon nanorings, possessing a radial π system, have garnered significant attention primarily due to their size-dependent photophysical properties and the presence of a unique curved π-conjugated cavity. This is evidenced by the rapid proliferation of publications. Furthermore, the integration of building blocks into CPP skeletons can confer [n]CPPs with novel and exceptional photophysical and electronic characteristics, as well as chiral properties and host-guest interactions, thereby augmenting the diversity of [n]CPPs. Notably, the curved π surface structures and concave cavity of carbon nanorings enable them to host aromatic or non-aromatic guests with a complementarily curved surface, resulting in interesting binary or ternary complexes. This review provides a comprehensive treatment of literature reports on binary and ternary complexes, focusing on both their host-guest interactions and properties. It is important to note that the scope of this review is limited to host-guest chemistry in binary and ternary complexes based on π-conjugated carbon nanorings.

Facile synthesis and characterization of aza-bridged all-benzenoid quinoidal figure-eight and cage molecules

Synthesis of conjugated compounds with unusual shape-persistent structures remains a challenge. Herein, utilizing thermodynamically reversible intermolecular Friedel-Crafts alkylation, a dynamic covalent chemistry (DCC) reaction, we facilely synthesized a figure-eight shaped macrocycle FEM and cage molecules CATPA/CACz. X-ray crystallographic analysis confirmed the chemical geometries of tetracation FEM4+(PF6 -)4 and hexacation CACz6+(SbF6 -)6. FEM and CATPA displayed higher photoluminescence quantum yield in solid states compared to that in solution, whereas CACz gave the reverse result. DFT calculations showed that fluorescence-related frontier molecular orbital profiles are mainly localized on their arms consisting of a p-quinodimethane (p-QDM) unit and two benzene rings of triphenylamine or carbazole. Owing to their space-confined structures, variable-temperature 1H NMR measurements showed that FEM, CATPA and FEM4+ have intramolecular restricted motion of phenyl rings on their chromophore arms. Accordingly, FEM and CATPA with flexible triphenylamine subunits displayed aggregation-induced emission behavior (AIE), whereas CACz with a rigid carbazole subunits structure showed no AIE behavior.

Synthesis and Photophysical Properties of a Chiral Carbon Nanoring Containing Rubicene

Herein we report the construction of an inherently chiral carbon nanoring, cyclo[7]paraphenylene-2,9-rubicene ([7]CPPRu2,9), by combining rubicene with a C-shaped synthon through the Suzuki-Miyaura coupling reaction. The structure was fully confirmed by high-resolution mass spectroscopies (HR-MS) and various NMR techniques. The photophysical properties were investigated by UV-vis absorption and fluorescence spectroscopy as well as the time-resolved fluorescence decay. Moreover, two enantiomers (M)/(P)-[7]CPPRu2,9 were successfully resolved by recyclable HPLC and studied by CD and CPL spectra.

One-Pot Synthesis of Bis(arylamino)pentiptycenes by TiCl4-DABCO Assisted Reductive Amination of Pentiptycene Quinone

The previously eight-step synthesis of bis(arylamino)pentiptycenes (2) from pentiptycene quinone (1) can now be achieved in a single step with 18-90% yields through TiCl4-DABCO assisted reductive amination with anilines. Both the dual amination of 1 and the in situ reduction of quinone diimines are unprecedented. The π system of 2 can be further expanded, including the formation of bis(diarylamino)pentiptycenes. This work also provides mechanistic insights into the challenges encountered in the dual reductive amination of 1 with other amines.

Highly Luminescent Chiral Carbon Nanohoops via Symmetry Breaking with a Triptycene Unit: Bright Circularly Polarized Luminescence and Size-Dependent Properties

Chiral carbon nanohoops with both high fluorescence quantum yield and large luminescence dissymmetry factor are essential to the development of circularly polarized luminescence (CPL) materials. Herein, the rational design and synthesis of a series of highly fluorescent chiral carbon nanohoops TP-[8-13]CPPs via symmetry breaking with a chiral triptycene motif is reported. Theoretical calculations revealed that breaking the symmetry of nanohoops causes a unique size-dependent localization in the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular obtitals (LUMOs) as the increasing of sizes, which is sharply different from those of [n]cycloparaphenylenes. Photophysical investigations demonstrated that TP-[n]CPPs display size-dependent emissions with high fluorescence quantum yields up to 92.9% for TP-[13]CPP, which is the highest value among the reported chiral conjugated carbon nanohoops. The high fluorescence quantum yields are presumably attributed to both the unique acyclic, and radial conjugations and high radiative transition rates, which are further supported by theoretical investigations. Chiroptical studies revealed that chiral TP-[n]CPPs exhibit bright CPL with CPL brightness up to 100.5 M-1 cm-1 for TP-[11]CPP due to the high fluorescence quantum yield. Importantly, the investigations revealed the intrigued size-dependent properties of TP-[n]CPPs with regards to (chir)optical properties, which follow a nice linear relationship versus 1/n. Such a nice linear relationship is not observed in other reported conjugated nanohoops including CPPs.

Rapid Synthesis of Chiral Figure-Eight Macrocycles Using a Preorganized Natural Product-Based Scaffold

Chiral D2 -symmetric figure-eight shaped macrocycles are promising scaffolds for amplifying the chiroptical properties of π-conjugated systems. By harnessing the inherent and adaptable conformational dynamics of a chiral C2 -symmetric bispyrrolidinoindoline (BPI) manifold, we developed an enantio-divergent modular synthetic platform to rapidly generate a diverse range of chiral macrocycles, spanning from 14- to 66-membered rings, eliminating the need for optical resolution. Notably, a 32-membered figure-eight macrocycle showed excellent circularly polarized luminescence (CPL: |glum |=1.1×10-2 ) complemented by a robust emission quantum yield (Φfl =0.74), to achieve outstanding CPL brightness (BCPL : ϵ×Φfl ×|glum |/2=480). Using quadruple Sonogashira couplings, this versatile synthetic platform enables precise adjustments of the angle, distance, and length among intersecting π-conjugated chromophores. Our synthetic strategy offers a streamlined and systematic approach to significantly enhance BCPL values for a variety of chiral D2 -symmetric figure-eight macrocycles.

Monitoring Hierarchical Assembly of Ring-in-Ring and Russian Doll Complexes Based on Carbon Nanoring by Förster Resonance Energy Transfer

We presented the construction of the ring-in-ring and Russian doll complexes on the basis of triptycene-derived carbon nanoring (TP-[12]CPP), which not only acts as a host for pillar[5]arene (P5A) but also serves as an energy donor for building Förster resonance energy transfer (FRET) systems. We also demonstrated that their hierarchical assembly processes could be efficiently monitored in real time using FRET. NMR, UV-vis and fluorescence, and mass spectroscopy analyses confirmed the successful encapsulation of the guests P5A/P5A-An by TP-[12]CPP, facilitated by C-H···π and ···π interactions, resulting in the formation of a distinct ring-in-ring complex with a binding constant of Ka = 2.23 × 104 M-1. The encapsulated P5A/P5A-An can further reverse its role to be a host for binding energy acceptors to form Russian doll complexes, as evidenced by the occurrence of FRET and mass spectroscopy analyses. The apparent binding constant of the Russian doll complexes was up to 3.6 × 104 M-1, thereby suggesting an enhanced synergistic effect. Importantly, the Russian doll complexes exhibited both intriguing one-step and sequential FRET dependent on the subcomponent P5A/P5A-An during hierarchical assembly, reminiscent of the structure and energy transfer of the light-harvesting system presented in purple bacteria.

Synthesis of π-Conjugated Chiral Aza/Boracyclophanes with a meta and para Substitution

We herein describe the synthesis of a new class of axially chiral aza/boracyclophanes (BDN1, BXN1, BDB1 and BXB1) using binaphthyls as chiral building blocks and the main-group (B/N) chemistry with tunable electronic effects. All macrocycles substituted with triarylamine donors or triarylborane acceptors are strongly luminescent. These macrocycles showed two distinct meta and para π-conjugation pathways, leading to the formation of quasi figure-of-eight and square-shaped conformations. Interestingly, comparison of such structural models revealed that the former type of macrocycles BXN1 and BXB1 gave higher racemization barriers relative to the other ones. The results reported here may provide a new approach to engineer the optical stability of π-conjugated chiral macrocycles by controlling π-substitution patterns. The ring constraints induced by macrocyclization were also demonstrated to contribute to the configurational persistence as compared with the open-chain analogues p-BTT and m-BTT.

Recent advances in supramolecular fullerene chemistry

Fullerene chemistry has come a long way since 1990, when the first bulk production of C60 was reported. In the past decade, progress in supramolecular chemistry has opened some remarkable and previously unexpected opportunities regarding the selective (multiple) functionalization of fullerenes and their (self)assembly into larger structures and frameworks. The purpose of this review article is to provide a comprehensive overview of these recent developments. We describe how macrocycles and cages that bind strongly to C60 can be used to block undesired addition patterns and thus allow the selective preparation of single-isomer addition products. We also discuss how the emergence of highly shape-persistent macrocycles has opened opportunities for the study of photoactive fullerene dyads and triads as well as the preparation of mechanically interlocked compounds. The preparation of two- or three-dimensional fullerene materials is another research area that has seen remarkable progress over the past few years. Due to the rapidly decreasing price of C60 and C70, we believe that these achievements will translate into all fields where fullerenes have traditionally (third-generation solar cells) and more recently been applied (catalysis, spintronics).

Bismacrocycle: Structures and Applications

In the past half-century, macrocycles with different structures and functions, have played a critical role in supramolecular chemistry. Two macrocyclic moieties can be linked to form bismacrocycle molecules. Compared with monomacrocycle, the unique structures of bismacrocycles led to their specific recognition and assembly properties, also a wide range of applications, including molecular recognition, supramolecular self-assembly, advanced optical material construction, etc. In this review, we focus on the structure of bismacrocycle and their applications. Our goal is to summarize and outline the possible future development directions of bismacrocycle research.

Synthesis of π-Conjugated Chiral Organoborane Macrocycles with Blue to Near-Infrared Emissions and the Diradical Character of Cations

Highly emissive π-conjugated macrocycles with tunable circularly polarized luminescence (CPL) have sparked theoretical and synthetic interests in recent years. Herein, we report a synthetic approach to obtain new chiral organoborane macrocycles (CMC1, CMC2, and CMC3) that are built on the structurally chiral [5]helicenes and highly luminescent triarylborane/amine moieties embedded into the cyclic systems. These rarely accessible B/N-doped main-group chiral macrocycles show a unique topology dependence of the optoelectronic and chiroptical properties. CMC1 and CMC2 show a higher luminescence dissymmetry factor (g_lum) together with an enhanced CPL brightness (B_CPL) as compared with CMC3. Electronic effects were also tuned and resulted in bathochromic shifts of their emission and CPL responses from blue for CMC1 to the near-infrared (NIR) region for CMC3. Furthermore, chemical oxidations of the N donor sites in CMC1 gave rise to a highly stable radical cation (CMC1^·+SbF₆^-) and diradical dication species (CMC1^2·2+2SbF₆^-) that serve as a rare example of a positively charged open-shell chiral macrocycle.

Boron-Cluster Embedded Necklace-Shaped Nanohoops

The combination of carbon-based nanohoops with other functional organic molecular structures should lead to the design of new molecular configurations with interesting properties. Here, necklace-like nanohoops embedded with carborane were synthesized for the first time. The unique deboronization of o-carborane has led to the facile preparation of ionic nanohoop compounds. Nanohoops functionalized by nido-o-carborane show excellent fluorescence emission, with a solution quantum yield of up to 90.0 % in THF and a solid-state quantum efficiency of 87.3 %, which opens an avenue for the applications of the nanohoops in OLEDs and bioimaging.

Supramolecular photosensitizers using extended macrocyclic hosts for photodynamic therapy with distinct cellular delivery

Two hydrophilic macrocycles can strongly bind hypocrellin B. The resulting supramolecular photosensitizers show excellent photodynamic efficiency with different cellular delivery.

Selective synthesis and (chir)optical properties of binaphthyl-based chiral carbon macrocycles

Herein, we report the selective synthesis, characterization, and photophysical properties of two novel chiral carbon macrocycles. Non-planar (S)-2,2'-bis(methoxymethoxy)-1,1'-binaphthalene was introduced into the scaffold of oligo-paraphenylenes to achieve the chirality in these macrocycles. Their photophysical properties were investigated by steady-state and time-resolved spectroscopies, as well as circular dichroism and circularly polarized luminescence spectroscopies. We demonstrate that the emission maxima of the chiral macrocycles are redshifted compared to chiral binaphthyl units and that macrocycles show chiroptical properties (|g_lum| > 1.0 × 10^-3).

An unexpected dual-emissive luminogen with tunable aggregation-induced emission and enhanced chiroptical property

In the literature, organic materials with both aggregation-induced emission (AIE) and aggregation-caused quenching (ACQ) effects that can emit with multiple bands both in the solution and aggregated state are rarely reported. Herein we report a novel chiral dual-emissive bismacrocycle with tunable aggregation-induced emission colors. A facile four-step synthesis strategy is developed to construct this rigid bismacrocycle, (1,4)[8]cycloparaphenylenophane (SCPP[8]), which possesses a 1,2,4,5-tetraphenylbenzene core locked by two intersecting polyphenylene-based macrocycles. The luminescent behavior of SCPP[8] shows the unique characteristics of both ACQ effect and AIE effect, inducing remarkable redshift emission with near white-light emission. SCPP[8] is configurationally stable and possesses a novel shape-persistent bismacrocycle scaffold with a high strain energy. In addition, SCPP[8] displays enhanced circularly polarized luminescence properties due to AIE effect.

Organic materials with both aggregation induced emission (AIE) and aggregation-caused quenching (ACQ) effects that can emit with multiple wavelengths in the solution and aggregated state are rarely reported. Here, the authors report a chiral dual-emissive bismacrocycle which shows the unique ACQ and AIE effects inducing redshift emission with near white-light emission.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Supramolecular-controlled regioselective photochemical [4+4] cycloaddition within Cp*Rh-based metallarectangles

Photochemical reactions are vital synthetic means for the synthesis of natural products as well as highly strained molecules. However, it remains an inherent challenge to control the chemo- and regioselectivity...

A robust platform to construct molecular patchy particles with a pentiptycene skeleton toward controlled mesoscale structures

A new pentiptycene skeleton with orthogonally reactive sites and inherent D2h-symmetry to construct molecular pathy particles toward mesoscale structures.

Nanosized Carbon Macrocycles Based on a Planar Chiral Pseudo Meta- [2.2]Paracyclophane

Structural designs combining cycloparaphenylenes (CPPs) backbone with planar chiral [2.2]Paracyclophane ([2.2]PCP) lead to optical-active chiral macrocycles with intriguing properties. X-ray crystal analysis revealed aesthetic necklace-shaped structures and size-dependent packages with long-range channels. The macrocycles exhibit unique photophysical properties with high fluorescence quantum yield of up to 82%, and the fluorescent color varies with ring size. In addition, size-dependent chiroptical properties with moderately large CPL dissymmetry factor of 10 -3 and CPL brightness in the range of 30 - 40 M -1 cm -1 were observed.

Covalent nanosynthesis of fluorene-based macrocycles and organic nanogrids

Gridization is an alternative way to create macromolecules of various sizes in addition to linear and dendritic polymerization as well as cyclization. Organic nanogrids are an expanding family of macrocycle-like closed structures at the nanoscale, but with a series of well-defined extension edges and vertices. Cyclic nanogrids can be used as nanoscale building blocks for the fabrication of not only rotaxanes, catenanes, knots, 3D cages, but also nanopolymers, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and complex molecular cross-scale architectures. In this review, the history of fluorene-based macrocycles has first been explored, followed by the development of the synthetic methodologies; in particular, fluorene-based nanogrids are highlighted owing to their features and applications. Typically, fluorenes are fused arenes with a hybrid entity between tetrahedral Csp³ and Csp². Four ingenious connection modes of fluorene-based macrocycles, including 2,7-, 3,6-, 9,9-, and 2,9-linkages, fully demonstrate the geometric possibilities of the macrocycles and nanogrids. Such fluorene-based nanogrids will give birth to organic intelligence.

Infinitene: A Helically Twisted Figure-Eight [12]Circulene Topoisomer

New forms of molecular nanocarbon particularly looped polyarenes adopting various topologies contribute to the fundamental science and practical applications. Here we report the synthesis of an infinity-shaped polyarene, infinitene (1) (cyclo[c.c.c.c.c.c.e.e.e.e.e.e]dodecakisbenzene), comprising consecutively fused 12-benzene rings forming an enclosed loop with a strain energy of 60.2 kcal·mol^-1. Infinitene (1) represents a topoisomer of still-hypothetical [12]circulene, and its scaffold can be formally visualized as the outcome of the "stitching" of two homochiral [6]helicene subunits by both their ends. The synthetic strategy encompasses transformation of a rationally designed dithiacyclophane to cyclophadiene through the Stevens rearrangement and pyrolysis of the corresponding S,S'-bis(oxide) followed by the photocyclization. The structure of 1 is a unique hybrid of helicene and circulene with a molecular formula of C₄₈H₂₄, which can be regarded as an isomer for kekulene, [6,6]carbon nanobelt ([6,6]CNB), and [12]cyclacene. Infinitene (1) is a bench-stable yellow solid with green fluorescence and soluble to common organic solvents. Its figure-eight molecular structure was unambiguously confirmed by X-ray crystallography. The scaffold of 1 is significantly compressed as manifested by a remarkably shortened distance (3.152-3.192 Å) between the centroids of two π-π stacked central benzene rings and the closest C···C distance of 2.920 Å. Fundamental photophysical properties of 1 were thoroughly elucidated by UV-vis absorption and fluorescence spectroscopic studies and density functional theory calculations. Its configurational stability enabled separation of the corresponding enantiomers (P,P) and (M,M) by a chiral HPLC. Circular dichroism (CD) and circularly polarized luminescence (CPL) measurements revealed that 1 has moderate |g_CD| and |g_CPL| values.

Overcrowded Ethylene-Bridged Nanohoop Dimers: Regioselective Synthesis, Multiconfigurational Electronic States, and Global Hückel/Möbius Aromaticity

The design and preparation of molecular systems with multiple geometric and electronic configurations are the cornerstones for multifunctional materials with stimuli-responsive behaviors. We describe here the regioselective and facile synthesis of two types of overcrowded ethylene-bridged nanohoop dimers, with folded and twisted geometric structures as well as closed-shell, diradical and dication electronic structures. The strained nanohoop structures have a profound effect on the overall molecular and electronic configurations, which resulted in the destabilized diradical state. X-ray crystallographic analysis revealed the folded molecular geometry for the neutral species and twisted geometry for the dication species. The unique molecular dynamics, optical properties, and dynamic redox properties were disclosed in the solution phase by spectroscopic and electrochemical methods. Furthermore, the global Hückel and Möbius aromaticity were revealed by a combination of experimental and theoretical approaches. Our studies shed light on the design of nanohoop-incorporated multiconfigurational materials with unique topologies and functions.

A Conjugated Figure-of-Eight Oligoparaphenylene Nanohoop with Adaptive Cavities Derived from Cyclooctatetrathiophene Core

A fully conjugated figure-of-eight nanohoop is presented with facile synthesis. The molecule's lemniscular skeleton features the combination of two strained oligoparaphenylene loops and a flexible cyclooctatetrathiophene core. Its rigid yet guest-adaptive cavities enable the formation of the peanut-like 1:2 host-guest complexes with C₆₀ or C₇₀ , which have been confirmed by X-ray crystallography and characterized in solution. Further computational studies suggest notable geometric variations and non-covalent interactions of the cavities upon binding with different fullerenes, as well as overall conjugation comparable to cycloparaphenylenes.

Fullerene Wires Assembled Inside Carbon Nanohoops

Carbon-nanohoop structures featuring one or more round-shaped cavities represent ideal supramolecular hosts for spherical fullerenes, with potential to form host-guest complexes that perform as organic semiconductors in the solid state. Due to the tight complexation between the shape-complementary hosts and guests, carbon nanohoops have the potential to shield fullerenes from water and oxygen, known to perturb the electron-transport process. Many nanohoop receptors have been found to form host-guest complexes with fullerenes. However, there is only a little or no control over the long-range order of encapsulated fullerenes in the solid state. Consequently, the potential of these complexes to perform as organic semiconductors is rarely evaluated. Herein, we present a survey of all known nanohoop-fullerene complexes, for which the solid-state structures were obtained. We discuss and propose instances where the inclusion fullerene guests form discrete supramolecular wires, which might open up possibilities for their use in electronic devices.

Cycloparaphenylene Double Nanohoop: Structure, Lamellar Packing, and Encapsulation of C60 in the Solid State

A new member of the cycloparaphenylene double-nanohoop family was synthesized. Its π-framework features two oval cavities that display different shapes depending on the crystallization conditions. Incorporation of the peropyrene bridge within the nanoring cycles via bay-regions alleviates steric effects and thus allows 1:1 complexation with C₆₀ in the solid state. This nanocarbon adopts a lamellar packing motif, and our results suggest that the structural adjustment of this double nanohoop could enable its use in supramolecular and semiconductive materials.

Recent Advances in Dimeric Cycloparaphenylenes as Nanotube Fragments

Since the discovery of cycloparaphenylenes in 2008, the chemical synthesis of more-complicated molecular systems with curved π-surfaces has been vigorously sought, giving rise to a plethora of new exciting molecules with various topologies and functions. This Synpacts article briefly summarizes recent examples of carbon nanohoop dimers, highlighting three examples as nanotube fragments. Their synthesis, isomerization, photophysical properties, and host–guest chemistry are discussed.

1 Introduction

2 Synthetic Strategy toward Nanotube Dimers

3 Isomerization Dynamics of Nanotube Dimers

4 Photophysical Properties of Nanotube Dimers

5 Host–Guest Chemistry of Nanotube Dimers

6 Conclusions

A supramolecular polymeric heterojunction composed of an all-carbon conjugated polymer and fullerenes

Herein, we design and synthesize a novel all-carbon supramolecular polymer host (SPh) containing conjugated macrocycles interconnected by a linear poly(para-phenylene) backbone. Applying the supramolecular host and fullerene C60 as the guest, we successfully construct a supramolecular polymeric heterojunction (SPh⊃C60). This carbon structure offers a means to explore the convex-concave π-π interactions between SPh and C60. The produced SPh was characterized by gel permeation chromatography, mass spectrometry, FTIR, Raman spectroscopy, and other spectroscopies. The polymeric segment can be directly viewed using a scanning tunneling microscope. Femtosecond transient absorption and fluorescence up-conversion measurements revealed femtosecond (≪300 fs) electron transfer from photoexcited SPh to C60, followed by nanosecond charge recombination to produce the C60 triplet excited state. The potential applications of SPh⊃C60 in electron- and hole-transport devices were also investigated, revealing that C60 incorporation enhances the charge transport properties of SPh. These results expand the scope of the synthesis and application of supramolecular polymeric heterojunctions.

Conjugated Nanohoops Incorporating Donor, Acceptor, Hetero- or Polycyclic Aromatics

In the last 13 years several synthetic strategies were developed that provide access to [n]cycloparaphenylenes ([n]CPPs) and related conjugated nanohoops. A number of potential applications emerged, including optoelectronic devices, and their use as templates for carbon nanomaterials and in supramolecular chemistry. To tune the structural or optoelectronic properties of carbon nanohoops beyond the size-dependent effect known for [n]CPPs, a variety of aromatic rings other than benzene were introduced. In this Review, we provide an overview of the syntheses, properties, and applications of conjugated nanohoops beyond [n]CPPs with intrinsic donor/acceptor structure or such that contain acceptor, donor, heteroaromatic or polycyclic aromatic units within the hoop as well as conjugated nanobelts.

Palladium-Catalyzed Desymmetric Intermolecular C-N Coupling Enabled by a Chiral Monophosphine Ligand Derived from Anthracene Photodimer

The development of chiral ligands with privileged scaffolds plays an important role in transition-metal-catalyzed asymmetric reactions. Herein we present anthracene-photodimer-derived chiral monophosphine ligand 1, which features dual chirality and a rigid scaffold. This ligand exhibits remarkable efficiency in Pd-catalyzed desymmetric intermolecular C-N coupling under mild conditions with excellent chemo- and enantioselectivity.

A Highly Strained All-Phenylene Conjoined Bismacrocycle

Herein, we report the precise synthesis of a 3D highly strained all-phenylene bismacrocycle, termed conjoined (1,4)[10]cycloparaphenylenophane (SCPP[10]). This structure consists of a twisted benzene ring which is bridged twice by phenylene units anchored in two para-positions. The conjoined structure of SCPP[10] was confirmed in real space at the atomic scale by scanning tunneling microscopy. Theoretical calculations indicate that this bismacrocycle has a very high strain energy of 110.59 kcal mol^-1 and the largest interphenylene torsion angle of 46.07° caused by multiple repulsive interactions. Furthermore, a 1:2 host-guest complex of SCPP[10] and [6,6]-phenyl-C₆₁ -butyric acid methyl ester was investigated, which represents the first peanut-shaped 1:2 host-guest complex based on bismacrocycles.

Cycloparaphenylene-Phenalenyl Radical and Its Dimeric Double Nanohoop*

The first example of a neutral spin-delocalized carbon-nanoring radical was achieved by integration of the open-shell phenalenyl unit into cycloparaphenylene (CPP). Spin distribution in this hydrocarbon is localized primarily on the phenalenyl segment and partially on the CPP segment as a consequence of steric and electronic effects. The resulting geometry is reminiscent of a diamond ring, with pseudo-perpendicular arrangement of the radial and the planar π-surface. The phenylene rings attached directly to the phenalenyl unit give rise to a steric effect that governs a highly selective dimerization pathway, yielding a giant double nanohoop. Its π-framework made of 158 sp2 -carbon atoms was elucidated by single-crystal X-ray diffraction, which revealed a three-segment CPP-peropyrene-CPP structure. This nanocarbon shows a fluorescence profile characteristic of peropyrene, regardless of which segment gets excited. These results in conjunction with DFT suggest that adjusting the size of the CPP segments in this double nanohoop could deliver donor-acceptor systems.

Chiral Triptycenes: Concepts, Progress and Prospects

Triptycenes have been established as unique scaffolds because of their backbone π-structure with a propeller-like shape and saddle-like cavities. They are some of the key organic molecules that have been extensively studied in polymer chemistry, in supramolecular chemistry and in material science. Triptycenes become chiral molecules when substituents are unsymmetrically attached in at least two of their different aromatic rings. This Minireview highlights the chirality of triptycenes from basics to an advanced stage for the development of functional molecules.