Stable and Highly Efficient Photocatalysis with Lead-Free Double-Perovskite of Cs2 AgBiBr6

Recent advances in metal halide perovskite based photocatalysts for artificial photosynthesis and organic transformations

Metal halide perovskites (MHP) emerged as highly promising materials for photocatalysis, offering significant advancements in the degradation of soluble and airborne pollutants, as well as the transformation of functional organic compounds. This comprehensive review focuses on recent developments in MHP-based photocatalysts, specifically examining two major categories: lead-based (such as CsPbBr3) and lead-free variants (e.g. Cs2AgBiX6, Cs3Bi2Br9 and others). While the review briefly discusses the contributions of MHPs to hydrogen (H2) production and carbon dioxide (CO2) reduction, the main emphasis is on the design principles that determine the effectiveness of perovskites in facilitating organic reactions and degrading hazardous chemicals through oxidative transformations. Furthermore, the review addresses the key factors that influence the catalytic efficiency of perovskites, including charge recombination, reaction mechanisms involving free radicals, hydroxyl ions, and other ions, as well as phase transformation and solvent compatibility. By offering a comprehensive overview, this review aims to serve as a guide for the design of MHP-based photocatalysis and shed light on the common challenges faced by the scientific community in the domain of organic transformations.

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

An Active and Robust Catalytic Architecture of NiCo/GaN Nanowires for Light-Driven Hydrogen Production from Methanol

On-site hydrogen production from liquid organic hydrogen carriers e.g., methanol provides an emerging strategy for the safe storage and transportation of hydrogen. Herein, a catalytic architecture consisting of nickel-cobalt nanoclusters dispersed on gallium nitride nanowires supported by silicon for light-driven hydrogen production from methanol is reported. By correlative microscopic, spectroscopic characterizations, and density functional theory calculations, it is revealed that NiCo nanoclusters work in synergy with GaN nanowires to enable the achievement of a significantly reduced activation energy of methanol dehydrogenation by switching the potential-limiting step from *CHO → *CO to *CH3O → *CH2O. In combination with the marked photothermal effect, a high hydrogen rate of 5.62 mol·gcat-1·h-1 with a prominent turnover frequency of 43,460 h-1 is achieved at 5 Wcm-2 without additional energy input. Remarkably, the synergy between Co and Ni, in combination with the unique surface of GaN, renders the architecture with outstanding resistance to sintering and coking. The architecture thereby exhibits a high turnover number of >16,310,000 over 600 h. Outdoor testing validates the viability of the architecture for active and robust hydrogen evolution under natural concentrated sunlight. Overall, this work presents a promising architecture for on-site hydrogen production from CH3OH by virtually unlimited solar energy.

Construction of BiOCl/bismuth-based halide perovskite heterojunctions derived from the metal-organic framework CAU-17 for effective photocatalytic degradation

The designed synthesis of an S-scheme heterojunction has possessed a great potential for improving photocatalytic wastewater treatment by demonstrating increased the photoredox capacity and improved the charge separation efficiency. Here, we introduce the fabrication of a heterojunction-based photocatalyst comprising bismuth oxychloride (BiOCl) and bismuth-based halide perovskite (BHP) nanosheets, derived from metal-organic frameworks (MOFs). Our composite photocatalyst is synthesized through a one-pot solvothermal strategy, where a halogenation process is applied to a bismuth-based metal-organic framework (CAU-17) as the precursor for bismuth sourcing. As a result, the rod-like structure of CAU-17 transforms into well-defined plate and nanosheet architectures after 4 and 8 h of solvothermal treatment, respectively. The modulation of the solvothermal reaction time facilitates the establishment of an S-scheme heterojunction, resulting in an increase in the photocatalytic degradation efficiency of rhodamine B (RhB) and sulfamethoxazole (SMX). The optimized BiOCl/BHP composite exhibits superior RhB and SMX degradation rates, achieving 99.8% degradation of RhB in 60 min and 75.1% degradation of SMX in 300 min. Also, the optimized BiOCl/BHP composite (CAU-17-st-8h sample) exhibited the highest rate constant (k = 3.48 × 10-3 min-1), nearly 6 times higher than that of the bare BHP in the photocatalytic degradation process of SMX. The enhanced photocatalytic efficiency can be endorsed to various factors: (i) the in-situ formation of two-components BiOCl/BHP photocatalyst, derived from CAU-17, effectively suppresses the aggregation of pristine BHP and BiOCl particles; (ii) the S-scheme heterostructure establishes a closely-knit interfacial connection, thereby facilitating efficient pathways for charge separation/transfer; and (iii) the BiOCl/BHP heterostructure enhances its capacity to absorb visible light. Our investigation establishes an effective strategy for constructing heterostructured photocatalysts, offering significant potential for application in photocatalytic wastewater treatment.

Photo-thermal synergistic CO2 hydrogenation towards CO over PtRh bimetal-decorated GaN nanowires/Si

Photo-thermal-synergistic hydrogenation is a promising strategy for upcycling carbon dioxide into fuels and chemicals by maximally utilizing full-spectrum solar energy. Herein, by immobilizing Pt-Rh bimetal onto a well-developed GaN NWs/Si platform, CO2 was photo-thermo-catalytically hydrogenated towards CO under concentrated light illumination without extra energies. The as-designed architecture demonstrates a considerable CO evolution rate of 11.7 mol gGaN-1 h-1 with a high selectivity of 98.5% under concentrated light illumination of 5.3 W cm-2, leading to a benchmark turnover frequency of 26 486 mol CO per mol PtRh per hour. It is nearly 2-3 orders of magnitude higher than that of pure thermal catalysis under the same temperature by external heating without light. Control experiments, various spectroscopic characterization methods, and density functional theory calculations are correlatively conducted to reveal the origin of the remarkable performance as well as the photo-thermal enhanced mechanism. It is found that the recombination of photogenerated electron-hole pairs is dramatically inhibited under high temperatures arising from the photothermal effect. More critically, the synergy between photogenerated carriers arising from ultraviolet light and photoinduced heat arising from visible- and infrared light enables a sharp reduction of the apparent activation barrier of CO2 hydrogenation from 2.09 downward to 1.18 eV. The evolution pathway of CO2 hydrogenation towards CO is also disclosed at the molecular level. Furthermore, compared to monometallic Pt, the introduction of Rh further reduces the desorption energy barrier of *CO by optimizing the electronic properties of Pt, thus enabling the achievement of excellent activity and selectivity. This work provides new insights into CO2 hydrogenation by maximally utilizing full-spectrum sunlight via photo-thermal synergy.

Enhancing the Photocatalytic Activity of Halide Perovskite Cesium Bismuth Bromide/Hydrogen Titanate Heterostructures for Benzyl Alcohol Oxidation

Halide perovskite Cs3Bi2Br9 (CBB) has excellent potential in photocatalysis due to its promising light-harvesting properties. However, its photocatalytic performance might be limited due to the unfavorable charge carrier migration and water-induced properties, which limit the stability and photocatalytic performance. Therefore, we address this constraint in this work by synthesizing a stable halide perovskite heterojunction by introducing hydrogen titanate nanosheets (H2Ti3O7-NS, HTiO-NS). Optimizing the weight % (wt%) of CBB enables synthesizing the optimal CBB/HTiO-NS, CBHTNS heterostructure. The detailed morphology and structure characterization proved that the cubic shape of CBB is anchored on the HTiO-NS surface. The 30 wt% CBB/HTiO-NS-30 (CBHTNS-30) heterojunction showed the highest BnOH photooxidation performance with 98% conversion and 75% benzoic acid (BzA) selectivity at 2 h under blue light irradiation. Detailed optical and photoelectrochemical characterization showed that the incorporating CBB and HTiO-NS widened the range of the visible-light response and improved the ability to separate the photo-induced charge carriers. The presence of HTiO-NS has increased the oxidative properties, possibly by charge separation in the heterojunction, which facilitated the generation of superoxide and hydroxyl radicals. A possible reaction pathway for the photocatalytic oxidation of BnOH to BzH and BzA was also suggested. Furthermore, through scavenger experiments, we found that the photogenerated h+, e- and •O2- play an essential role in the BnOH photooxidation, while the •OH have a minor effect on the reaction. This work may provide a strategy for using HTiO-NS-based photocatalyst to enhance the charge carrier migration and photocatalytic performance of CBB.

Lead-free Cs2AgBiBr6 double perovskite microcrystals for effective visible-light photocatalytic thio/selenocyanation

Lead-free perovskite microcrystals (MCs) have been regarded as promising potential photocatalysts, owing to their high molar extinction coefficient, low economic cost, adjustable light absorption range, and ample surface-active sites. Herein, C-3 thio/selenocyanation of indoles is demonstrated in high selectivity and yield by using lead-free double perovskite Cs2AgBiBr6 MCs under visible light irradiation. Moreover, the photocatalyst can be recycled at least 5 times without a significant decrease in catalytic activity.

Confinement of CsPbBr3 Perovskite Nanocrystals into Extra-large-pore Zeolite for Efficient and Stable Photocatalytic Hydrogen Evolution

Metal halide perovskites (MHPs), renowned for their outstanding optoelectronic properties, hold significant promise as photocatalysts for hydrogen evolution reaction (HER). However, the low stability and insufficient exposure of catalytically active sites of bulky MHPs seriously impair their catalytic efficiency. Herein, we utilized an extra-large-pore zeolite ZEO-1 (JZO) as a host to confine and stabilize the CsPbBr3 nanocrystals (3.4 nm) for boosting hydrogen iodide (HI) splitting. The as-prepared CsPbBr3@ZEO-1 featured sufficiently exposed active sites, superior stability in acidic media, along with intrinsic extra-large pores of ZEO-1 that were favorable for molecule/ion adsorption and diffusion. Most importantly, the unique nanoconfinement effect of ZEO-1 led to the narrowing of the band gap of CsPbBr3, allowing for more efficient light utilization. As a result, the photocatalytic HER rate of the as-prepared CsPbBr3@ZEO-1 photocatalyst was increased to 1734 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3) under visible light irradiation compared with bulk CsPbBr3 (11 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), and the long-term durability (36 h) can be achieved. Furthermore, Pt was incorporated with well-dispersed CsPbBr3 nanocrystals into ZEO-1, resulting in a significant enhancement in activity (4826 μmol ⋅ h-1 ⋅ g-1 (CsPbBr3)), surpassing most of the Pt-integrated perovskite-based photocatalysts. Density functional theory (DFT) calculations and charge-carrier dynamics investigation revealed that the dramatically boosted photocatalytic performance of Pt/CsPbBr3@ZEO-1 could be attributed to the promotion of charge separation and transfer, as well as to the substantially lowered energy barrier for HER. This work highlights the advantage of extra-large-pore zeolites as the nanoscale platform to accommodate multiple photoactive components, opening up promising prospects in the design and exploitation of novel zeolite-confined photocatalysts for energy harvesting and storage.

PVP Passivated δ-CsPbI3: Vacancy Induced Visible-Light Absorption and Efficient Photocatalysis

The aqueous instability of halide perovskite seriously hinders its direct application in water as a potential photocatalyst. Here, we prepared a new type of polyvinylpyrrolidone (PVP) passivated δ-CsPbI3 (δ-CsPbI3@PVP) microcrystal by a facile method. This material can be uniformly dispersed in water and stably maintain its crystal structure for a long time, breaking through the bottleneck of halide perovskite photocatalysis in water. Under visible light, δ-CsPbI3@PVP can almost completely photodegrade organic dyes (including Rhodamine B, methylene blue, and crystal violet) in only 20 min. The efficient photocatalytic activity is attributed to the enhanced visible light absorption arising from PbI2 defects in δ-CsPbI3@PVP and the intrinsic low photoluminescence quantum yield of δ-CsPbI3, which induces efficient light absorption and photocatalytic activity. We highlight δ-CsPbI3@PVP as an effective aqueous photocatalyst, and this study provides new insights into how to exploit the potential of halide perovskite in photocatalytic applications.

Halogen-Site Regulation in Cs3Bi2X9 Quantum Dots for Efficient and Selective Oxidation of Benzyl Alcohol Driven by Solar Light

Sluggish charge kinetics and low selectivity limit the solar-driven selective organic transformations under mild conditions. Herein, an efficient strategy of halogen-site regulation, based on the precise control of charge transfer and molecule activation by rational design of Cs3Bi2X9 quantum dots photocatalysts, is proposed to achieve both high selectivity and yield of benzyl-alcohol oxidation. In situ PL spectroscopy study reveals that the Bi─Br bonds formed in the form of Br-associated coordination can enhance the separation and transfer of photoexcited carriers during the practical reaction. As the active center, the exclusive Bi─Br covalence can benefit the benzyl-alcohol activation for producing carbon-centered radicals. As a result, the Cs3Bi2Br9 with this atomic coordination achieves a conversion ratio of 97.9% for benzyl alcohol and selectivity of 99.6% for aldehydes, which are 56.9- and 1.54-fold higher than that of Cs3Bi2Cl9. Combined with quasi-in situ EPR, in situ ATR-FTIR spectra, and DFT calculation, the conversion of C6H5-CH2OH to C6H5-CH2* at Br-related coordination is revealed to be a determining step, which can be accelerated via halogen-site regulation for enhancing selectivity and photocatalytic efficiency. The mechanistic insights of this research elucidate how halogen-site regulation in favor of charge transfer and molecule activation toward efficient and selective oxidation of benzyl alcohol.

Composites of (NH2)-MIL-53(Al) and CBB as bifunctional electrocatalysts for overall electrochemical water splitting in all pH solutions

Electrochemical water splitting is one of the most active areas of energy research, yet the benchmark electrocatalysts used for this area are based on expensive noble metals and transition metals, thus mainly reactions in alkaline solution. MOFs and halide perovskite are novel electrochemical catalysts but unstable in water basically. Here we report a study on composites of (NH2)-MIL-53(Al) MOFs and CBB halide perovskite (Cs3Bi2Br9), which exhibit obvious activity for overall electrochemical water splitting for long-term stability with little deactivation after 10 h in all pH solutions.

Structural Modification Strategies, Interfacial Charge-Carrier Dynamics, and Solar Energy Conversion Applications of Organic-Inorganic Halide Perovskite Photocatalysts

Over the past few decades, organic-inorganic halide perovskites (OIHPs) as novel photocatalyst materials have attracted intensive attention for an impressive variety of photocatalytic applications due to their excellent photophysical (chemical) properties. Regarding practical application and future commercialization, the air-water stability and photocatalytic performance of OIHPs need to be further improved. Accordingly, studying modification strategies and interfacial interaction mechanisms is crucial. In this review, the current progress in the development and photocatalytic fundamentals of OIHPs is summarized. Furthermore, the structural modification strategies of OIHPs, including dimensionality control, heterojunction design, encapsulation techniques, and so on for the enhancement of charge-carrier transfer and the enlargement of long-term stability, are elucidated. Subsequently, the interfacial mechanisms and charge-carrier dynamics of OIHPs during the photocatalytic process are systematically specified and classified via diverse photophysical and electrochemical characterization methods, such as time-resolved photoluminescence measurements, ultrafast transient absorption spectroscopy, electrochemical impedance spectroscopy measurements, transient photocurrent densities, and so forth. Eventually, various photocatalytic applications of OIHPs, including hydrogen evolution, CO2 reduction, pollutant degradation, and photocatalytic conversion of organic matter.

[Ag4Br6] cluster-based 3D bromoargentate hybrid: crystal structure, optical/photoelectrical performance and theoretical study

The self-assembly of cluster-based halide framework materials has been a matter of great interest but with great challenges. Herein, by exploiting hexamethylenetetramine (Hmta) with Td symmetry as a structural modifier, we successfully constructed and systematically characterized an unusual three-dimensional (3D) hybrid bromoargentate, namely K[NH4][Ag4Br6(Hmta)] (1), bearing a diamond-type [Ag4Br6(Hmta)]n2n- anionic skeleton built up from adamantane-like units of inorganic [Ag4Br6] clusters and organic Hmta ligands. UV-Vis diffuse reflectance analysis showed that the optical bandgap of the title compound was 2.68 eV, indicating a visible-light-responsive semiconductive behavior. More importantly, upon alternate light illumination, the so-designed compound exhibited remarkable photoelectric switching properties, with photocurrent densities (0.38 and 1.10 μA cm-2 for visible and full-spectrum light, respectively) that compete well with and even exceed those of some high-performance metal halide counterparts. Further theoretical calculations, including band structure, density of states, and wave functions, revealed that compound 1 has a unique valence band and conduction band distribution, rendering it with small effective masses (especially the electrons), which may be responsible for its good photoelectricity. Furthermore, in this work, Hirshfeld surface analysis, thermogravimetric analysis, and X-ray photoelectron spectroscopy (XPS) studies were performed.

Stable and Highly Efficient Photocatalysis with Two-Dimensional Organic-Inorganic Hybrid Perovskites

Two-dimensional organic-inorganic hybrid perovskites (OIHPs) have excellent photoelectric properties, such as high charge mobility and a high optical absorption coefficient, which have attracted enormous attention in the field of optoelectronic devices and photochemistry. However, the stability of 2D OIHPs in solution is deficient. In particular, the lack of stability in polar solutions hinders their application in photochemistry. In this work, (iso-BA)2PbI4 was used as a model to explore the three possibilities of the stable existence of a 2D perovskite in aqueous solution. And two of these systems that stabilize the presence of (iso-BA)2PbI4 were further investigated through electrochemical testing. Moreover, (iso-BA)2PbI4 2D hybrid perovskites exhibited an outstanding degradation rate. The chiral perovskite (R/S-MBA)2PbI4 is able to degrade a 30 mg/L methyl orange solution completely within 5 min, making it one of the fastest catalysts for this particular organic reaction. Further, based on the electron spin resonance test, a degradation mechanism by the halide perovskite was proposed. Based on the great catalytic performance as well as good reusability and stability, (R/S-MBA)2PbI4 perovskites are expected to be a new generation of catalysts, making a great impact on the application of asymmetrically catalyzed photoreactions.

Utilizing the Undesirable Oxidation of Lead-Free Hybrid Halide Perovskite Nanosheets for Solar-Driven Photocatalytic C(sp3)─H Activation: Unraveling the Serendipity

Hybrid halide perovskites (HHPs), whose every branch generates intrusiveness, have been utilized in solar cells from a broader perspective. However, the inclusiveness of employing HHP as a photocatalyst is in its initial stage. This study mainly focuses on the unexpected utilization of, so far, undesirable material vacancy-ordered MA2SnBr6 quantum dots synthesized from MASnBr3 nanosheets. Here, the quantum confinement grounded a large blue shift in ultraviolet (UV) and photoluminescence (PL) spectra with a Stokes shift of 420 meV, where the band gap increase is observed as size decreases in MA2SnBr6. Remarkably, MA2SnBr6 exhibits air and moisture stability, better charge transfer, and high oxidation potential compared to MASnBr3. The first-principles-based atomistic computations reveal the strain relaxation in the Sn-Br framework that structurally stabilizes the MA2SnBr6 lattice. Furthermore, the direct band gap and strongly localized valence band edge give rise to a new potential photocatalyst MA2SnBr6 for efficient solar-driven C(sp3)─H activation of cyclohexane and toluene under ambient conditions.

Stabilizing Metal Halide Perovskites for Solar Fuel Production: Challenges, Solutions, and Future Prospects

Metal halide perovskites (MHPs) are emerging photocatalyst materials that can enable sustainable solar-to-chemical energy conversion by virtue of their broad absorption spectra, effective separation/transport of photogenerated carriers, and solution processability. Although preliminary studies show the excellent photocatalytic activities of MHPs, their intrinsic structural instability due to the low formation energy and soft ionic nature is an open challenge for their practical applications. This review discusses the latest understanding of the stability issue and strategies to overcome this issue for MHP-based photocatalysis. First, the origin of the instability issue at atomic levels and the design rules for robust structures are analyzed and elucidated. This is then followed by presenting several different material design strategies for stability enhancement, including reaction medium modification, material surface protection, structural dimensionality engineering, and chemical composition engineering. Emphases are placed on understanding the effects of these strategies on photocatalytic stability as well as the possible structure-performance correlation. Finally, the possible future research directions for pursuing stable and efficient MHP photocatalysts in order to accelerate their technological maturity on a practical scale are outlined. With that, it is hoped to provide readers a valuable snapshot of this rapidly developing and exciting field.

Composition Dependent Strain Engineering of Lead-Free Halide Double Perovskite: Computational Insights

The critical photophysical properties of lead-free halide double perovskites (HDPs) must be substantially improved for various applications. In this regard, strain engineering is a powerful tool for enhancing optoelectronic performance with precise control. Here, we employ ab initio simulations to investigate the impact of mild compressive and tensile strains on the photophysics of Cs2AgB'X6 (B' = Sb, Bi; X = Cl, Br) perovskites. Depending on the pnictogen and halide atoms, the band gap and band edge positions of HDPs can be tuned to a significant extent by controlling the applied external strain. Cs2AgSbBr6 has the most substantial strain response under structural perturbations. The subtle electronic interactions among the participating orbitals and the band dispersion at the edge states are enhanced under compressive strain, reducing the carrier effective masses. The exciton binding energies for these Br-based HDPs are in the range 59-78 meV and weaken in the compressed lattices, suggesting improved free carrier generation. Overall, the study emphasizes the potential of lattice strain engineering to boost the photophysical properties of HDPs that can ultimately improve their optoelectronic performance.

Which Ion Dominates the Temperature and Pressure Response of Halide Perovskites and Elpasolites?

Halide perovskites and elpasolites are key for optoelectronic applications due to their exceptional performance and adaptability. However, understanding their crucial elastic properties for synthesis and device operation remains limited. We performed temperature- and pressure-dependent synchrotron-based powder X-ray diffraction at low pressures (ambient to 0.06 GPa) to investigate their elastic properties in their ambient-pressure crystal structure. We found common trends in bulk modulus and thermal expansivity, with an increased halide ionic radius (Cl to Br to I) resulting in greater softness, higher compressibility, and thermal expansivity in both materials. The A cation has a minor effect, and mixed-halide compositions show intermediate properties. Notably, thermal phase transitions in MAPbI3 and CsPbCl3 induced lattice softening and negative expansivity for specific crystal axes, even at temperatures far from the transition point. These results emphasize the significance of considering temperature-dependent elastic properties, which can significantly impact device stability and performance during manufacturing or temperature sweeps.

Fabricating a type II heterojunction by growing lead-free perovskite Cs2AgBiBr6in situ on graphite-like g-C3N4 nanosheets for enhanced photocatalytic CO2 reduction

Perovskite-based photocatalysts have received significant attention for converting CO2 into fuels, such as CO, CH4 or long alkyl chains. However, the use of these catalysts is plagued by several limitations, such as poor stability, lead toxicity, and inadequate conversion efficiency due to the rapid recombination of carriers. Herein, a g-C3N4@Cs2AgBiBr6 (CABB) type II heterojunction photocatalyst has been prepared by growing lead-free CABB nanocrystals (10-14 nm) on the graphite-like carbon nitride (g-C3N4) nanosheet using the in situ crystallization method. The resulting nanocomposite, g-C3N4@CABB, demonstrated an efficient charge transfer pathway via a typical type II heterojunction. With formation rates of 10.30 μmol g-1 h-1 for CO and 0.88 μmol g-1 h-1 for CH4 under visible light irradiation, the nanocomposite exhibited enhanced photocatalytic efficiency in CO2 reduction compared to CABB and g-C3N4. The improved photocatalytic performance of the g-C3N4@CABB nanocomposite was attributed to the fabricated type II heterojunction, which boosted the interfacial charge transfer from g-C3N4 to CABB. This work will inspire the design of heterojunction-based photocatalysts and increase the fundamental understanding of perovskite-based catalysts in the CO2 photoreduction process.

3D-Heterojunction Based on Embedded Perovskite Micro-Sized Single Crystals for Fast Photomultiplier Photodetectors with Broad/Narrowband Dual-Mode

A fast photomultiplier photodetector with a broad/narrowband dual mode is implemented using a new 3D heterostructure based on embedded perovskite micro-sized single crystals. Because the single-crystal size is smaller than the electrode size, the active layer can be divided into a perovskite microcrystalline part for charge transport and a polymer-embedded part for charge storage. This induces an additional radial interface in the 3D heterojunction structure, and allows a photogenerated built-in electric field in the radial direction, especially when the energy levels between the perovskite and embedding polymer are similar. This type of heterojunction has a small radial capacitance that can effectively reduce carrier quenching and accelerate the carrier response. By controlling the applied bias direction, up to 300-1000% external quantum efficiency (EQE) and microsecond response can be achieved not only in the wide range of ultraviolet to visible light from 320 to 550 nm, but also in the narrow-band response with a full width at half minimum (FWHM) of 20 nm. This shows great potential for applications in integrated multifunctional photodetectors.

High-efficiency visible-light-driven oxidation of primary C-H bonds in toluene over a CsPbBr3 perovskite supported by hierarchical TiO2 nanoflakes

Photocatalytic oxidation of toluene to valuable fine chemicals is of great significance, yet faces challenges in the development of advanced catalysts with both high activity and selectivity for the activation of inert C(sp3)-H bonds. Halide perovskites with remarkable optoelectronic properties have shown to be prospective photoactive materials, but the bulky structure with a small surface area and severe recombination of photogenerated electron-hole pairs are obstacles to application. Here, we fabricate a hierarchical nanoflower-shaped CsPbBr3/TiO2 heterojunction by assembling CsPbBr3 nanoparticles on 2D TiO2 nanoflake subunits. The design significantly downsizes the size of CsPbBr3 from micrometers to nanometers, and forms a type II heterojunction with intimate interfacial contact between CsPbBr3 and TiO2 nanoflakes, thereby accelerating the separation and transfer of photogenerated charges. Moreover, the formed hierarchical heterojunction increaseslight absorption by refraction and scattering, offers a large surface area and enhances the adsorption of toluene molecules. Consequently, the optimized CsPbBr3/TiO2 exhibits a high performance (10 200 μmol g-1 h-1) for photocatalytic toluene oxidation with high selectivity (85%) for benzaldehyde generation under visible light. The photoactivity is about 20 times higher than that of blank CsPbBr3, and is among the best photocatalytic performances reported for selective oxidation of toluene under visible light irradiation.

Hybrid Double Perovskite Derived Halides Based on Bi and Alkali Metals (K, Rb): Diverse Structures, Tunable Optical Properties and Second Harmonic Generation Responses

Double perovskites (DP) have attracted extensive attention due to their rich structures and wide application prospects in the field of optoelectronics. Here, we report 15 new Bi-based double perovskite derived halides with the general formula of A2 BBiX6 (A=organic cationic ligand, B=K or Rb, X=Br or I). These materials are synthesized using organic ligands to coordinate with metal ions with a sp3 oxygen, and diverse structure types have been obtained with distinct dimensionalities and connectivity modes. The optical band gaps of these phases can be tuned by changing the halide, the organic ligand and the alkali metal, varying from 2.0 to 2.9 eV. The bromide phases exhibit increasing photoluminescence (PL) intensity with decreasing temperature, while the PL intensity of iodide phases changes nonmonotonically with temperature. Because the majority of these phases are non-centrosymmetric, second harmonic generation (SHG) responses are also measured for selected non-centrosymmetric materials, showing different particle-size-dependent trends. Our findings give rise to a series of new structural types to the DP family, and provide a powerful synthetic handle for symmetry breaking.

Colloid driven low supersaturation crystallization for atomically thin Bismuth halide perovskite

It is challenging to grow atomically thin non-van der Waals perovskite due to the strong electronic coupling between adjacent layers. Here, we present a colloid-driven low supersaturation crystallization strategy to grow atomically thin Cs₃Bi₂Br₉. The colloid solution drives low-concentration solute in a supersaturation state, contributing to initial heterogeneous nucleation. Simultaneously, the colloids provide a stable precursor source in the low-concentration solute. The surfactant is absorbed in specific crystal nucleation facet resulting in the anisotropic growth of planar dominance. Ionic perovskite Cs₃Bi₂Br₉ is readily grown from monolayered to six-layered Cs₃Bi₂Br₉ corresponding to thicknesses of 0.7, 1.6, 2.7, 3.6, 4.6 and 5.7 nm. The atomically thin Cs₃Bi₂Br₉ presents layer-dependent nonlinear optical performance and stacking-induced second harmonic generation. This work provides a concept for growing atomically thin halide perovskite with non-van der Waal structures and demonstrates potential application for atomically thin single crystals' growth with strong electronic coupling between adjacent layers.

Multimodal Biofilm Inactivation Using a Photocatalytic Bismuth Perovskite-TiO2-Ru(II)polypyridyl-Based Multisite Heterojunction

Infectious bacterial biofilms are recalcitrant to most antibiotics compared to their planktonic version, and the lack of appropriate therapeutic strategies for mitigating them poses a serious threat to clinical treatment. A ternary heterojunction material derived from a Bi-based perovskite-TiO₂ hybrid and a [Ru(2,2'-bpy)₂(4,4'-dicarboxy-2,2'-bpy)]²⁺ (2,2'-bpy, 2,2'-bipyridyl) as a photosensitizer (RuPS) is developed. This hybrid material is found to be capable of generating reactive oxygen species (ROS)/reactive nitrogen species (RNS) upon solar light irradiation. The aligned band edges and effective exciton dynamics between multisite heterojunctions are established by steady-state/time-resolved optical and other spectroscopic studies. Proposed mechanistic pathways for the photocatalytic generation of ROS/RNS are rationalized based on a cascade-redox processes arising from three catalytic centers. These ROS/RNS are utilized to demonstrate a proof-of-concept in treating two elusive bacterial biofilms while maintaining a high level of biocompatibility (IC₅₀ > 1 mg/mL). The in situ generation of radical species (ROS/RNS) upon photoirradiation is established with EPR spectroscopic measurements and colorimetric assays. Experimental results showed improved efficacy toward biofilm inactivation of the ternary heterojunction material as compared to their individual/binary counterparts under solar light irradiation. The multisite heterojunction formation helped with better exciton delocalization for an efficient catalytic biofilm inactivation. This was rationalized based on the favorable exciton dissociation followed by the onset of multiple oxidation and reduction sites in the ternary heterojunction. This together with exceptional photoelectric features of lead-free halide perovskites outlines a proof-of-principle demonstration in biomedical optoelectronics addressing multimodal antibiofilm/antimicrobial modality.

High-Efficiency and Stable Long-Persistent Luminescence from Undoped Cesium Cadmium Chlorine Crystals Induced by Intrinsic Point Defects

Application of long-persistent luminescence (LPL) materials in many technological fields is in the spotlight. However, the exploration of undoped persistent luminescent materials with high emission efficiency, robust stability, and long persistent duration remains challenging. Here, inorganic cesium cadmium chlorine (CsCdCl₃ ) is developed, featuring remarkable LPL characteristics at room temperature, which is synthesized by a facile hydrothermal method. Excited by ultraviolet light, the CsCdCl₃ crystals exhibit an intense yellow emission with a large photoluminescence quantum yield of ≈90%. Different from the reported systems with lanthanides or transition metals doping, the CsCdCl₃ crystals without dopants perform yellow LPL with a long duration of 6000 s. Joint experiment-theory characterizations reveal the intrinsic point defects of CsCdCl₃ act as the trap centers of excited electrons and the carrier de-trapping process from such trap sites to localized emission centers contributes to the LPL. Encouraged by the attractive fluorescence and persistent luminescence as well as good stability of CsCdCl₃ against environment oxygen/moisture (75%), heat (100 °C for 10 h), and ultraviolet light irradiation, an effective dual-mode information storage-reading application is demonstrated. The results open up a new frontier for exploring LPL materials without dopants and provide an opportunity for advanced information storage compatible for practical applications.

Halide Perovskite glues activate two-dimensional covalent organic framework crystallites for selective NO2 sensing

Two-dimensional covalent organic frameworks (2D COFs) are promising for gas sensing owing to the large surface area, abundant active sites, and their semiconducting nature. However, 2D COFs are usually produced in the form of insoluble micro-crystallites. Their poor contacts between grain boundaries severely suppress the conductivity, which are too low for chemresistive gas sensing. Here, we demonstrate that halide perovskites can be employed as electric glues to bond 2D COF crystallites to improve their conductivity by two orders of magnitude, activating them to detect NO₂ with high selectivity and sensitivity. Resonant microcantilever, grand canonical Monte Carlo, density functional theory and sum-frequency generation analyses prove that 2D COFs can enrich and transfer electrons to NO₂ molecules, leading to increased device conductivity. This work provides a facile approach for improving the conductivity of polycrystalline 2D COF films and may expand their applications in semiconductor devices, such as sensors, resistors, memristors and field-emission transistors.

Recent developments in lead-free bismuth-based halide perovskite nanomaterials for heterogeneous photocatalysis under visible light

Halide perovskite materials, especially lead-based perovskites, have been widely used for optoelectronic and catalytic applications. However, the high toxicity of the lead element is a major concern that directs the research work toward lead-free halide perovskites, which could utilize bismuth as a promising candidate. Until now, the replacement of lead by bismuth in perovskites has been well studied by designing bismuth-based halide perovskite (BHP) nanomaterials with versatile physical-chemical properties, which are emerging in various application fields, especially heterogeneous photocatalysis. In this mini-review, we present a brief overview of recent progress in BHP nanomaterials for photocatalysis under visible light. The synthesis and physical-chemical properties of BHP nanomaterials have been comprehensively summarized, including zero-dimensional, two-dimensional nanostructures and hetero-architectures. Later, we introduce the photocatalytic applications of these novel BHP nanomaterials with visible-light response, improved charge separation/transport and unique catalytic sites. Due to advanced nano-morphologies, a well-designed electronic structure and an engineered surface chemical micro-environment, BHP nanomaterials demonstrate enhanced photocatalytic performance for hydrogen generation, CO₂ reduction, organic synthesis and pollutant removal. Finally, the challenges and future research directions of BHP nanomaterials for photocatalysis are discussed.

Efficient Charge Transfer and Effective Active Sites in Lead-Free Halide Double Perovskite S-Scheme Heterojunctions for Photocatalytic H2 Evolution

The practical application of lead-free double perovskite Cs₂ AgBiBr₆ in photocatalytic H₂ evolution is still restricted due to the low activity and poor stability. The rational design of lead-free halide double perovskites heterojunctions with efficient charge transfer and effective active sites is a potential route to achieve the ideal prospect. Herein, in this work an S-scheme heterojunction of Cs₂ AgBiBr₆ with enriched Br-vacancies and WO₃ nanorods (V_Br -Cs₂ AgBiBr₆ /WO₃ ) obtaining excellent visible-light responsive photocatalytic H₂ evolution performance and durable stability is reported. The S-scheme heterojunction driven by the unaligned Fermi levels of these two semiconductors ensures the efficient charge transfer at the interface, and density functional theory calculations reveal the enriched Br vacancies on Cs₂ AgBiBr₆ (022) surfaces introduced by atom thermal vibration provide effective active sites for hydrogen evolution. The optimized V_Br -Cs₂ AgBiBr₆ /WO₃ S-scheme photocatalyst exhibits the photocatalytic hydrogen evolution rate of 364.89 µmol g^-1 h^-1 which is 4.9-fold of bare V_Br -Cs₂ AgBiBr₆ (74.44 µmol g^-1 h^-1 ) and presents long-term stability of 12 h continuous photocatalytic reaction. This work provides deep insights into the photocatalytic mechanism of V_Br -Cs₂ AgBiBr₆ /WO₃ S-scheme heterojunctions, which emerges a new strategy in the applications of perovskite-based photocatalysts.

Defect-Dependent Nonlinear Absorption in the Lead-Free Double-Perovskite Cs2AgBiBr6

Lead-free perovskites have attracted increasing attention because they can address the toxicity and instability problems inherent to lead-halide perovskites. Furthermore, the nonlinear optical (NLO) properties of lead-free perovskites are rarely explored. Herein, we report significant NLO responses and defect-dependent NLO behavior of Cs₂AgBiBr₆. Specifically, a thin film of pristine Cs₂AgBiBr₆ exhibits strong reverse saturable absorption (RSA), while a film of Cs₂AgBiBr₆ with defects (denoted as Cs₂AgBiBr₆(D)) shows saturable absorption (SA). The nonlinear absorption coefficients are ca. 4.0 × 10⁴ cm GW^-1 (515 nm laser excitation) and 2.6 × 10⁴ cm GW^-1 (800 nm laser excitation) for Cs₂AgBiBr₆ and -2.0 × 10⁴ cm GW^-1 (515 nm laser excitation) and -7.1 × 10³ cm GW^-1 (800 nm laser excitation) for Cs₂AgBiBr₆(D). The optical limiting threshold of Cs₂AgBiBr₆ is 8.1 × 10^-4 J cm^-2 (515 nm laser excitation). The samples show excellent long-term performance stability in air. The RSA of pristine Cs₂AgBiBr₆ correlates with excited-state absorption (515 nm laser excitation) and excited-state absorption following two-photon absorption (800 nm laser excitation), while the defects in Cs₂AgBiBr₆(D) strengthen the ground-state depletion and Pauli blocking, resulting in SA.

Low-Temperature Preparation of High-Quality Perovskite Polycrystalline Films via Crystallization Kinetics Engineering

Preparation of lead halide perovskite polycrystalline films at a low annealing temperature is highly restricted by their intrinsically large crystallization activation energy, which hinders the conversion of the precursors/intermediates to perovskites and yields as-prepared polycrystals with tiny grain sizes and terrible crystal quality. Herein, we demonstrate through in-situ, real-time spectroscopic studies that both the nucleation and crystal growth kinetics can be improved without the need for a high annealing temperature by treating the film with thiourea, as accounted for by the reduced activation energy. As a consequence, the thiourea-treated perovskite polycrystalline film exhibits larger grain sizes and greater crystallinity than the untreated one. More importantly, owing to the synergistic effect of the promoted crystallization kinetics and the passivation of surface defects, the low-temperature prepared films treated with thiourea even present more prominent photophysical properties than those fabricated by using the conventional high-temperature method. The strategy of crystallization kinetics engineering proposed in this work paves the way for fabricating high-quality perovskite polycrystalline films in a low-temperature manner.

A Review on Halide Perovskite-Based Photocatalysts: Key Factors and Challenges

A growing number of research articles have been published on the use of halide perovskite materials for photocatalytic reactions. These articles extend these materials' great success from solar cells to photocatalytic technologies such as hydrogen production, CO₂ reduction, dye degradation, and organic synthesis. In the present review article, we first describe the background theory of photocatalysis, followed by a description on the properties of halide perovskites and their development for photocatalysis. We highlight key intrinsic factors influencing their photocatalytic performance, such as stability, electronic band structure, and sorption properties. We also discuss and shed light on key considerations and challenges for their development in photocatalysis, such as those related to reaction conditions, reactor design, presence of degradable organic species, and characterization, especially for CO₂ photocatalytic reduction. This review on halide perovskite photocatalysts will provide a better understanding for their rational design and development and contribute to their scientific and technological adoption in the wide field of photocatalytic solar devices.

Recent Progress in Halide Perovskite Nanocrystals for Photocatalytic Hydrogen Evolution

Due to its environmental cleanliness and high energy density, hydrogen has been deemed as a promising alternative to traditional fossil fuels. Photocatalytic water-splitting using semiconductor materials is a good prospect for hydrogen production in terms of renewable solar energy utilization. In recent years, halide perovskite nanocrystals (NCs) are emerging as a new class of fascinating nanomaterial for light harvesting and photocatalytic applications. This is due to their appealing optoelectronic properties, such as optimal band gaps, high absorption coefficient, high carrier mobility, long carrier diffusion length, etc. In this review, recent progress in halide perovskite NCs for photocatalytic hydrogen evolution is summarized. Emphasis is given to the current strategies that enhance the photocatalytic hydrogen production performance of halide perovskite NCs. Some scientific challenges and perspectives for halide perovskite photocatalysts are also proposed and discussed. It is anticipated that this review will provide valuable references for the future development of halide perovskite-based photocatalysts used in highly efficient hydrogen evolution.

2D/2D Inorganic/Organic Hybrid of Lead-Free Cs2AgBiBr6 Double Perovskite/Covalent Triazine Frameworks with Boosted Charge Separation and Efficient CO2 Photoreduction

Heterojunction construction, especially the inorganic/organic hybrids, is regarded as a universal and effective strategy to achieve high-performance photocatalysts. Herein, a 2D/2D inorganic/organic hybrid photocatalyst was constructed by the electrostatic self-assembly of the lead-free double-perovskite of Cs₂AgBiBr₆ nanosheets (NSs) and covalent triazine framework (CTF) NSs. The resultant Cs₂AgBiBr₆/CTF-1 (CABB/CTF-1) hybrid possessed a large surface-to-surface contact area, ensuring intimate interfacial interaction and efficient charge transfer/separation. Meanwhile, the periodical pore structure of CTF-1 endowed the CABB/CTF-1 hybrid with enhanced CO₂ adsorption/activation capacity. Consequently, the 2D/2D CABB/CTF-1 hybrid exhibited a remarkable photocatalytic performance toward CO₂ reduction. Based on the band structure analysis and various characterization techniques, for example, X-ray photoelectron spectra and electron spin resonance, an S-scheme charge transfer mechanism was proposed. This study presents a new protocol for designing 2D/2D inorganic/organic hybrid photocatalytic systems, which hold great potentials in solar fuel applications.

Microwave-Assisted Photocatalytic Degradation of Organic Pollutants via CNTs/TiO2

Introducing microwave fields into photocatalytic technology is a promising strategy to suppress the recombination of photogenerated charge carriers. Here, a series of microwave-absorbing photocatalysts, xCNTs/TiO2, were prepared by combining titanium dioxide (TiO2) with carbon nanotubes (CNTs) using a typical alcoholic thermal method to study the promotion of microwave-generated thermal and athermal effects on the photocatalytic oxidation process. As good carriers that are capable of absorbing microwaves and conducting electrons, CNTs can form hot spots and defects under the action of the thermal effect from microwaves to capture electrons generated on the surface of TiO2 and enhance the separation efficiency of photogenerated electrons (e−) and holes (h+). Excluding the influence of the reaction temperature, the athermal effect of the microwave field had a polarizing effect on the catalyst, which improved the light absorption rate of the catalyst. Moreover, microwave radiation also promoted the activation of oxygen molecules and hydroxyl groups on the catalyst surface to generate more reactive oxygen radicals. According to the mechanism analysis, the microwave effect significantly improved the photocatalytic advanced oxidation process, which lays a solid theoretical foundation for practical application.

Two [Co(bipy)3]3+-Templated Silver Halobismuthate Hybrids: Syntheses, Structures, Photocurrent Responses, and Theoretical Studies

Employing in situ-generated metal complexes as structural decorating agents, we, for the first time, isolated two [Co(bipy)₃]³⁺-templated silver halobismuthate hybrids, namely [Co(bipy)₃]₂Ag₄Bi₂X₁₆ (X = Br (1), I (2); bipy = 2,2'-bipyridine). Compounds 1 and 2 belong to the isomorphic phrases and exhibit the nonperovskite structures characteristic of the discrete [Ag₄Bi₂X₁₆]^6- anions. UV-vis absorption spectra analyses showed that the optical band gaps of compounds 1 and 2 are 2.40 and 1.95 eV, respectively, implying the visible light responding semiconductor properties. Moreover, under the alternate light illumination, the title compounds exhibited "on/off" photocurrent behaviors, with high photocurrent densities comparable to many metal halide hybrids. Presented in this work also involved the Hirshfeld surface analyses and X-ray photoelectron spectroscopy studies together with the theoretical band structures, density of states, and electron wave functions.

Promoting optoelectronic properties of Cs2AgBiBr6 nanocrystals by formation of heterostructures with BiOCl nanosheets

Lead halide perovskite nanocrystals and their heterostructures have achieved substantial advances in optoelectronics; however, their inherent material instability and lead toxicity have driven research on alternative material systems. Herein, solution-processable heterostructures composed of lead-free double perovskite Cs₂AgBiBr₆ nanocrystals and BiOCl nanosheets were prepared through a colloidal synthesis method. Defect states were present in BiOCl and benefited carrier generation, recombination and transport in Cs₂AgBiBr₆. As a result, the light emission of the Cs₂AgBiBr₆ nanocrystals was greatly enhanced at low temperatures, and the photodetector based on the Cs₂AgBiBr₆/BiOCl heterostructure exhibited a much improved on-off ratio compared to the device based on Cs₂AgBiBr₆ alone. Our work highlights the complex nature and impact of two-dimensional heterostructure assembly on the optoelectronic properties of lead-free double perovskites and demonstrates their great potential toward environmentally friendly optoelectronic devices.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Construction of Donor-Acceptor Heteroporous Covalent Organic Frameworks as Photoregulated Oxidase-like Nanozymes for Sensing Signal Amplification

Nanomaterials with enzyme-like characteristics (called nanozymes) show their extreme potentials as alternatives to natural enzymes. Covalent organic frameworks (COFs) as metal-free nanozymes have attracted huge attention for catalytic applications due to their flexible molecular design and synthetic strategies and conjugated, porous, and chemically stable architectures. Designing high-performance two-dimensional (2D) porous COF materials embedded with functional building units for modulating nanozymes' catalytic activity is of immense importance in contemporary research. The proper combination of donor-acceptor (D-A) fragments within a porous COF skeleton is an effective strategy to decrease the band gap and provide a strong charge-transfer pathway for highly effective charge separation. Herein, two donor-acceptor heteroporous COFs using an electron-deficient 4,4'-(thiazolo[5,4-d]thiazole-2,5-diyl)dibenzaldehyde (Tz) unit or 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzaldehyde (Td) unit and electron-rich tetrakis(4-aminophenyl)ethane (ETTA) linkers were presented. The resulting crystalline and heteroporous COFs showed outstanding oxidase-like activity under light irradiation, which can catalyze the oxidation of typical substrates and corresponding evolution in color and absorption. The light-activatable ETTA-Tz COF with prominent oxidase-like activity can serve as a colorimetric probe for quantitative detection of sulfide ions with a linear range of 1-50 μM and a detection limit of 0.27 μM within 3 min. The colorimetric approach could also be used for sulfide ion detection in human serum samples. The research demonstrated the future potential of D-A motifs within fully conjugated COFs to obtain excellent mimic enzyme activity.

Boosted Inner Surface Charge Transfer in Perovskite Nanodots@Mesoporous Titania Frameworks for Efficient and Selective Photocatalytic CO2 Reduction to Methane

Exploring high-efficiency and stable halide perovskite-based photocatalysts for the selective reduction of CO₂ to methane is a challenge because of the intrinsic photo- and chemical instability of halide perovskites. In this study, halide perovskites (Cs₃ Bi₂ Br₉ and Cs₂ AgBiBr₆ ) were grown in situ in mesoporous TiO₂ frameworks for an efficient CO₂ reduction. Benchmarked CH₄ production rates of 32.9 and 24.2 μmol g^-1  h^-1 with selectivities of 88.7 % and 84.2 %, were achieved, respectively, which are better than most reported halide perovskite photocatalysts. Focused ion-beam sliced-imaging techniques were used to directly image the hyperdispersed perovskite nanodots confined in mesopores with tunable sizes ranging from 3.8 to 9.9 nm. In situ X-ray photoelectronic spectroscopy and Kelvin probe force microscopy showed that the built-in electric field between the perovskite nanodots and mesoporous titania channels efficiently promoted photo-induced charge transfer. Density functional theory calculations indicate that the high methane selectivity was attributed to the Bi-adsorption-mediated hydrogenation of *CO to *HCO that dominates CO desorption.